Users Manual
CAR A100 HTC StereoClip (AUX) User Guide http://www.htc.com/www/support/warranty.html Thank you for purchasing the HTC StereoClip (AUX). The HTC StereoClip (AUX) is an accessory that Bluetooth enables your car audio system. This User Guide will get you started and ready to make the most of your HTC StereoClip (AUX). About your HTC StereoClip (AUX) HTC StereoClip (AUX) cap 3.5mm audio jack Control button HTC StereoClip (AUX) USB port LED indicator The Control button on HTC StereoClip (AUX) performs different functions depending on how long you press it. - Press: Less than 4 seconds - Press and hold: more than 4 seconds English Overview English Features • • • • • • • • Bluetooth 2.1 + EDR (Minimum) Supports Advanced Audio Distribution Profile (A2DP) Supports CSR aptX™ codec Stereo output to 3.5mm audio jack Bluetooth Simple Secure Pairing Auto-pairing with selected HTC phones or tablets Automatic power off to conserve battery power Battery capacity: 85mAh - Play time: up to 5 hrs - Standby: 120 hrs Getting Started Charging your HTC StereoClip (AUX) Before using HTC StereoClip (AUX) for the first time, you need to charge it using the micro-USB cable. Normal charge takes approximately 2 hours. 1. Connect one end of the USB cable to the USB port of HTC StereoClip (AUX). 2. Connect the other end of the USB cable to a computer or a power adaptor. Note: When the battery needs charging, the Red LED blinks slowly. If you do not charge HTC StereoClip (AUX), it turns itself off before battery depletes. • • To turn on HTC StereoClip (AUX), press the Control button. The Green LED lights for 1 second and then goes off. To turn off HTC StereoClip (AUX), press and hold the Control button. The Red LED lights for 1 second and then goes off. Pairing with mobile devices HTC StereoClip (AUX) needs to be paired with your phone or tablet before it can be used. When the devices are successfully paired and active, the Green LED blinks 3 times in succession every 5 seconds. Note: HTC StereoClip (AUX) also supports “auto-pairing” with selected HTC phones which support HTC Car. 1. Turn on the Bluetooth feature on your mobile device. 2. Press and hold the Control button to turn HTC StereoClip (AUX) on. The Green LED blinks quickly, indicating HTC StereoClip (AUX) is in pairing mode. 3. Set your mobile device to search for Bluetooth devices, and select “HTC Car A100” from the search results. Note: HTC StereoClip (AUX) can store pairing information of up to eight devices. English Turning the HTC StereoClip (AUX) on and off English Configuring HTC Car for auto-pairing 1. Turn on your phone and launch HTC Car application. 2. On the HTC Car main panel, tap the status icons to enter the HTC Car’s settings. 3. Make sure “Auto-connect” is selected and “Default audio-out accessory” is set to “HTC Car Bluetooth audio-out accessory”. 4. When HTC StereoClip (AUX) is in pairing mode, the phone will automatically pair and connect to it. Connecting to the car audio system 1. Remove the HTC StereoClip (AUX) cap and plug the HTC StereoClip (AUX) into the audio input (AUX) of the car audio system. 2. Turn on the car audio system. 3. Play the media files on your phone or tablet. Car audio system When HTC StereoClip (AUX) is turned off then on again, it will attempt to re-establish the connection to your phone or tablet automatically. Alternatively, press the Control button to re-establish the connection manually. What the LED indicator means Event Power off Power on LED color & behavior Green for 1 second then Off Solid Red Solid Green Fast Flash Green Flash Green 3 times in succession every 5 seconds Status Powering On Inadequate battery power to power on Battery is charging Battery is fully charged Pairing mode Devices are successfully paired and active Flash Red every 5 seconds Low battery Red for 1 second then Off Powering Off Flash Red for 4 seconds English Reconnecting HTC StereoClip (AUX) to mobile devices English Taking care of your HTC StereoClip (AUX) Always store HTC StereoClip (AUX) with the cap on. Avoid storing at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. • Do not expose HTC StereoClip (AUX) to rain or other liquids. • Never try to dismantle the product yourself. Contact authorised dealers or service centres for repair service. • • Certification CE This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, HTC, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.HTC.com Within the EU this device is intended to be used in Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland. Bluetooth The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license. Other trademarks and trade names are those of their respective owners. The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on the 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this directive is, as a priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such waste so as to reduce disposal. on the product or on its box indicates that this The WEEE logo product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city centre, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference English Compatibility for a Better Environment English will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. • This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada (IC) Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Informations concernant l’exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil HTC est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans fil HTC de façon à minimiser les contacts humains lors du fonctionnement normal. NCC Statement 根據NCC低功率電波輻射性電機管理辦法 規定: 1.1 第十二條 1.2 經型式認證合格之低功率射頻電機,非經許可,公司、商號 或使用者均不得擅自變更頻率、加大功率或變更原設計之特 性及功能。 1.3 第十四條 1.4 低功率射頻電機之使用不得影響飛航安全及干擾合法通信; 經發現有干擾現象時,應立即停用,並改善至無干擾時方得 繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻 射性電機設備之干擾。 English Canada, avis d’Industry Canada (IC) English © 2012 HTC. All rights reserved. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license. (Design and specifications subject to change without notice). 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Instance ID : uuid:2097dc1c-b8c9-42d6-91da-04f62bc664d2 Document ID : adobe:docid:indd:3126f949-fa22-11e0-ae22-cd5caa48c2a8 Original Document ID : adobe:docid:indd:3126f949-fa22-11e0-ae22-cd5caa48c2a8 Rendition Class : proof:pdf Derived From Instance ID : 4e5b20aa-f92c-11e0-84a7-cc6b893a562c Derived From Document ID : adobe:docid:indd:18f83575-cf94-11e0-85d7-df1932dbdb89 History Action : saved, saved, saved, saved History Instance ID : xmp.iid:45FF32DE0677E111B3FEAA65EC7D9140, xmp.iid:46FF32DE0677E111B3FEAA65EC7D9140, xmp.iid:1A6C06200777E111B3FEAA65EC7D9140, xmp.iid:1B6C06200777E111B3FEAA65EC7D9140 History When : 2012:03:26 13:45:17+08:00, 2012:03:26 13:45:17+08:00, 2012:03:26 13:47:08+08:00, 2012:03:26 13:47:08+08:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /metadata Create Date : 2012:03:26 13:48:09+08:00 Modify Date : 2012:03:26 14:25:24-08:00 Metadata Date : 2012:03:26 14:25:24-08:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 11242 bytes, use -b option to extract), (Binary data 12040 bytes, use -b option to extract) Doc Change Count : 2 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 12 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools