HTC IRIS100 Smart Phone User Manual Book Iris Generic English Manual indb
HTC Corporation Smart Phone Book Iris Generic English Manual indb
HTC >
Contents
- 1. User manual 1
- 2. User manual 2
- 3. User manual 3 rev
User manual 3 rev
Getting Connected 85
Launch Outlook E-mail
or your default e-mail
messaging software
Launch Internet Explorer
Add program
shortcuts
Access and
send SMS text
messages
View connection status
Click the menus to set
preference options and
access more VZAccess
Manager functions
Connection status Network signal
strength
Battery power status of your phone
Tip You can change this to show your notebook's
battery level. Click Tools > Preferences >
WWAN to make the change.
86 Getting Connected
Text messaging
Click on VZAccess Manager to use its text messaging feature. VZAccess Manager then downloads
SMS text messages from your phone and lists them in the TXT Messaging view. You can manage your text
messages right on this screen, such as check and read incoming text messages, reply, forward, etc.
Click these tabs to
choose messaging
functions.
New incoming messages
text messages appear in
bold.
To reply or compose a new text
message, enter the mobile phone
number of the recipient and your
message then click Send.
Shows the content of a
selected message.
Note Text messages are synchronized between your phone and VZAccess Manager.
8.7 Windows Live Mobile
Windows Live Mobile gives you full Internet experience on your phone.
Windows Live Mobile offers the following key features:
• Windows Live Search. Windows Live’s search engine for finding information on the web.
• Windows Live Contacts. Address book for storing Windows Live Mail, Windows Live Messaging, and
Hotmail contacts.
• Windows Live Messenger Mobile. Next generation of MSN Messenger Mobile.
• Windows Live Mail. Next generation of Hotmail.
Set up Windows Live Mobile
The first time you use Windows Live Mobile, sign in by using your Windows Live ID, which is your Windows
Live Mail or Hotmail address, and password.
Getting Connected 87
To set up Windows Live Mobile for the first time
1. Click Start > Windows Live.
2. Click Sign in to Windows Live.
3. On the next screen, click the links to read the Windows
Live Term of Use and the Microsoft Privacy Statement.
After reviewing them, click Accept.
4. Enter your Windows Live Mail or Hotmail address and
password, then click Next.
5. Choose whether or not to show Windows Live’s search
bar and applications on the Home screen then click
Next.
6. Choose what information you want to synchronize
online with your phone.
If you choose to synchronize Contacts and Messenger,
your online contacts will be added to the contact list and
to Windows Live Messenger Mobile on your phone.
If you choose to synchronize E-mail, your Windows Live
Mail or Hotmail inbox messages will be downloaded to
your phone.
7. Click Next.
8. After synchronization is complete, click Done.
The Windows Live Mobile interface
On the main interface of Windows Live Mobile, you will see a search bar, navigation bar, and an area where
you can customize to show your picture.
1This is the Windows Live Search
bar.
2Press NAVIGATION left or right
to switch among Live Mail,
Messenger, and Sync status. Click
to open/activate the selected
Windows Live component.
3Click to access Windows Live
Messenger settings.
4Click Menu to access and change
settings.
2
1
3
4
If you chose to display the search bar and Windows Live applications on the Home screen when you were
setting up Windows Live, you’ll see them on the Home screen:
88 Getting Connected
Search bar and
Windows Live applications
To show or hide them, open Windows Live and click Menu > Options > Home screen options.
Chapter 9
Experiencing Multimedia
9.1 Camera and Video Recorder
9.2 Pictures & Videos
9.3 Windows Media Player Mobile
9.4 Java
90 Experiencing Multimedia
9.1 Camera and Video Recorder
Taking photos and shooting video clips with audio are easy with your phone’s built-in camera.
To open Camera or Video Recorder
Do any of the following:
• On the Home screen, click Start > Camera.
• On the Home screen, click Start > Video Recorder.
• Press and hold the CAMERA button on the right side of the phone.
To exit Camera or Video Recorder
• Press END ( ).
Note Pressing ( ) simply "minimizes" the Camera program, it is still runing in the background. To close the Camera
program, go to Task Manager.
To capture photos and video clips
Aim the camera at the subject and then press CAMERA or ENTER to take the shot. When capturing video, press
CAMERA or ENTER to start recording video; press again to stop recording.
Capture modes
The Camera program lets you capture pictures and video clips using various built-in modes. The title bar
displays the active capture mode.
The available capture modes are as follows:
Capture mode Function
Photo ( ) Captures standard still images.
Video ( )Captures video clips, with or without audio.
Contacts Picture ( ) Captures a still image suitable for assigning as an identification photo to a contact.
Picture Theme ( ) Captures still images and places them within frames.
Panorama ( ) Captures a sequence of still images continuously in one direction, and allows stitching of all the
images to create a panoramic view of a scenery.
Sports ( )Captures a sequence of still images (3 or 5 frames) automatically for a short duration at a
defined frequency.
Using the above capture modes, the camera captures files in the following formats:
Capture type Format
Still Image JPEG
Video Motion-JPEG (.avi)
MPEG-4 (.mp4)
H.263 baseline (.3gp)
3GPP2 (.3g2)
To change the capture mode
1. On the Camera screen, click and then keep clicking Next Setting to select .
2. Press NAVIGATION right to open the Mode list.
3. Click a capture mode from the list and then click OK.
Experiencing Multimedia 91
Camera mode icons and indicators
The Camera [Photo] screen
1 Indicates the current capture mode.
2 Indicates the current zoom ratio. Press NAVIGATION up or
down to increase or decrease the zoom level.
3 Indicates the current image or video size based on the
resolution you chose.
4 Indicates where the captured images and video clips will
be saved.
5 Depending on the capture mode, this shows the
remaining, available shots of pictures that you can take or
remaining duration that can be recorded. While recording
video, this shows the recorded duration.
6 Click to open the Camera Settings screen.
7 Indicates the current Metering mode being used, either
Center Area ( ) or Average ( ).
1 2 3 45
6 7 8 9 10 11
8 Adjust the exposure value from -2 EV to +2 EV (increments of 0.5) by pressing NAVIGATION left or right.
9 Indicates the current white balance setting.
10 Indicates the current self-timer setting while capturing images.
11 Click to view the picture or video in Pictures & Videos.
The Camera [Video] screen The Camera [Picture Theme] screen
The Recording Status indicator
blinks while video recording is in
progress.
Displays the current and total number
of photos that can be taken using the
selected template.
92 Experiencing Multimedia
Use zooming
Before capturing a still image or a video clip, you can first zoom in to make the object in focus move closer,
and you can zoom out to make the object move farther away. In all capture modes, press NAVIGATION up on
your phone to zoom in, NAVIGATION down to zoom out.
The camera zoom range for a picture or video depends on the capture mode and capture size. Also, please
note the capture sizes available for certain capture formats also vary from one capture mode to another.
The Review screen
After capturing a photo or video, you will be presented with options that you can do with the captured media
file.
Icon Function
Click to go back to Camera screen.
Click to delete the captured image or video clip.
Click to send the captured image or video clip to someone via e-mail.
Click to switch to Pictures & Videos to show the still image, or switch to Windows Media Player to play back the
video clip.
Click to associate the photo to a selected contact. (For Contacts Picture mode only)
Note After you have taken photos in Sports mode, the total number of consecutive shots is shown at the lower right corner
of the Review screen. Press NAVIGATION up or down to browse through the sequence of photos.
Customize Camera settings
Click on the Camera screen to open the Camera settings screen where you can activate self-timer, change
the ambience, customize capture settings, and more. Use the NAVIGATION CONTROL and the left SOFT KEY to
go through the available settings. The following table provides a list of the general options in the menu.
Option Allows you to
Select the Self-timer option for capturing images: Off, 2 seconds, or 10 seconds. Selecting 2 seconds or
10 seconds delays the capturing by the specified time after you press ENTER.
Select whether to save the file in the device memory or on the memory card.
Only available in Picture Theme mode. Allows you to select a template to use for Picture Theme mode.
Only available in Panorama mode. Direction determines how the photos will be stitched. Stitch Count
determines how many snapshots will be taken for the panoramic photo. When Auto Stitch is On, the camera
automatically stitches the snapshots into one single file. When Off, the snapshots are saved as separate files.
Only available in Sports mode. The Capture Speed option determines the interval between shots. The
Snapshots option determines how many shots to take with a single press of ENTER.
Specify
the white balance setting, such as Auto, Daylight, Night, Incandescent, and Fluorescent to suit
the lighting environment. You can also
choose a special effect, such as Grayscale, Sepia, Cool, or Negative to
apply to your photos or video clips.
Choose the resolution to use and set the metering mode to either Center Area or Average. While
capturing images, you can also set the Quality and enable Time Stamp.
Switch between different capture modes, such as Photo, Video, Contacts Picture, and more. For details, see
“Capture modes” earlier in this chapter.
Access more settings that lets you customize the Camera or Video Recorder functions. You can customize
settings such as the capture format, camera shutter sound, flicker adjustment, recording limit, and more.
Experiencing Multimedia 93
9.2 Pictures & Videos
The Pictures & Videos program allows you to view and manage media files on your phone.
To copy a picture or video clip to your phone
You can copy pictures from your PC and view them on your phone.
• Copy the pictures and video files from your PC or a storage card to the My Pictures folder on your
phone.
For more information about copying files from your PC to your phone, see Windows Mobile Device Center or
ActiveSync Help on your PC.
Note You can also copy pictures and video files from your PC to your phone using a memory card. Insert the memory card
into the memory card slot on your phone, and then copy them from your PC to the folder you created on the memory
card.
To view media files
1. On the Home screen, click Start > Pictures & Videos.
2. Select a media file and click View or Play (if video file) to view or play back the file.
This icon indicates that the file is
a GIF animation file. Click View to play
back the file.
This icon indicates that the file is a
video file. Click Play to play back the file in
Windows Media Player Mobile.
Note If you cannot find the media file in the default My Pictures folder, click Menu > Folders > My Device to go to other
folders.
Pictures & Videos menu
Select a media file onscreen and click Menu to open a list of
options that you can do with the selected media file.
You can choose to send the selected media file via one of your
messaging accounts, beam it to another device, play the pictures
as a slide show, send the picture to your Windows Live MySpace
account, and more.
Click Options to customize picture settings and slide show
playback preferences.
Note The available menu options depend on the selected media file.
When viewing a picture file, click Menu > Use as Home Screen
to set the picture as your Home Screen background. You can also
do minor touch ups to the picture such as rotate and crop by
clicking Menu > Edit.
94 Experiencing Multimedia
9.3 Windows Media Player Mobile
You can use Microsoft® Windows Media® Player Mobile for
Smartphone to play digital audio and video files that are
stored on your phone or on a network, such as on a Web
site.
To open Windows Media Player Mobile, click Start >
Windows Media.
About the controls
By default, these hardware buttons are assigned to Windows Media Player Mobile functions.
Tip To change the assigned hardware buttons, on the Playback screen, click Menu > Options > Buttons.
To Press
Play or pause ENTER
Skip to a previous file NAVIGATION left
Skip to the next file NAVIGATION right
Increase the volume NAVIGATION up
Decrease the volume NAVIGATION down
Turn the sound on or off quickly (mute) #
Switch to full screen during video playback
0
Change rating *
Fast-forward a file NAVIGATION right (hold)
Rewind a file NAVIGATION left (hold)
About the screens and menus
Windows Media Player Mobile has three primary screens:
Playback screen
The default screen that displays the
playback controls and the video
window.
Now Playing screen
This special playlist indicates the
current file being played and files
that are queued up to play next.
Library screen
The screen that lets you quickly
find your audio files, video files, and
playlists.
Experiencing Multimedia 95
Click Menu to open a list of options that you can do in a particular screen The commands on this menu vary,
depending upon which screen you are viewing.
About licenses and protected files
Some media files have associated licenses that protect them from being unlawfully distributed or shared.
If you want to copy a protected file from your PC to your phone, use the Windows Media Player on your PC to
synchronize the file to your phone. This will ensure that the license is copied along with the protected file. For
more information about synchronizing files to your phone and other mobile devices, see the Windows Media
Player Help.
Note You can view the protection status for a file by checking its file properties (Menu > Properties).
Copy files to your phone
Use the Sync feature in Windows Media Player on your PC to synchronize (copy) digital media files from your
PC to your phone. Using Sync ensures that protected files and album art (for skins) are copied to your phone
correctly.
To synchronize content to your phone automatically
1. On your PC, start Windows Media Player and then connect your phone to your PC.
2. In the Device Setup Wizard, type a name for the phone and click Finish.
3. On the leftmost pane, right-click your phone and select Set Up Sync.
Note You can also sync your storage card if you have one installed on your phone. To sync, right-click Storage Card.
4. On the Device Setup dialog box, select the Sync this device automatically and then select the
playlist(s) that you want to sync between the PC and your phone.
5. Click Finish.
The files begin synchronizing to your phone. The next time you connect your phone to your PC while
Windows Media Player is running, synchronization will start automatically.
To synchronize and copy content manually to your phone
1. If you have not set up synchronization between your phone and PC, follow steps 1 to 3 in “To
synchronize content to your phone automatically.”
2. Click the Sync tab on the Windows Media Player. Select a Playlist or a Library on the left panel of the
Windows Media Player.
3. From the content list, drag files you want to sync to your phone to the right panel of the Windows
Media Player.
4. Click Start Sync to start copying files to your phone.
96 Experiencing Multimedia
Playlists and Library list
Start Sync
Playlist or library content list
Drag files from the content list to sync to
your phone
Dragging a file into the Sync list
Notes
• Always use Windows Media Player 11 on your PC to synchronize (copy) files to your phone.
• Audio files copy faster if Windows Media Player is configured to automatically set the quality level for audio files
copied to your phone. For more information, see the Windows Media Player Help.
Play media
To play media on your phone
Use the library to find and play songs, videos, and playlists that are stored on your phone or storage card.
1. If you are not on the Library screen, click Menu > Library.
2. If necessary, on the Library screen, click Menu > Library, and then select the library that you want to
use.
3. In most cases, Windows Media Player Mobile automatically updates the library. However, you can
manually update the library to ensure that it contains new files that you recently copied to your phone
or storage card. Click Menu > Update Library to manually update the library list.
4. Select a category (for example, My Music or My Playlists), select the item that you want to play (such
as a song, album, or artist name), and then click Play.
Note To play a file that is stored on your phone but is not in a library, on the Library screen, click Menu > Open File. Select
the item that you want to play (such as a file or a folder), and click Play.
Troubleshooting
For more information, see the Troubleshooting Windows Media Player Mobile page at the Microsoft Web site
(http://www.microsoft.com/windows/windowsmedia/player/windowsmobile/troubleshooting.aspx).
Experiencing Multimedia 97
9.4 Java
The Java program allows you to download Java-based applications, such as games and tools that are
specifically designed for mobile devices.
Install MIDlets
To install MIDlets from the Internet
1. On the Home screen, click Start > Java.
2. Click Menu > Install > Browse to open Internet Explorer Mobile.
3. Locate the MIDlet/MIDlet suite while connected to the Internet.
4. Select the MIDlet/MIDlet suite to download.
5. To start installing the MIDlet/MIDlet suite, click Yes.
6. Click Done to confirm the installation.
Notes
• You can cancel the installation at any time.
• Downloaded MIDlets will be automatically saved in the root folder.
To install MIDlets from a PC
You can install the MIDlets/MIDlet suites on your phone from a PC using the USB sync cable or Bluetooth. You
can copy the MIDlet file(s) from a PC to any of the following temporary folders on your phone from where the
Java program can install them.
• Device memory: ../Smartphone/My Documents/My MIDlets
• Storage card: ../Smartphone/Storage Card
Note If the My MIDlets folder does not exist in My Documents, you can create one with the same folder name. To create
a folder, click Menu > New Folder on the Java screen. However, a folder named Storage Card automatically
appears after you insert a storage card into your phone.
To install MIDlets from a local folder
1. On the Home screen, click Start > Java.
2. Click Menu > Install > Local Files to install the MIDlets
currently saved in the My MIDlets folder.
3. Select the MIDlet/MIDlet suite from the list using the
NAVIGATION CONTROL and click Install.
4. Click Continue or Yes to install.
By default, the MIDlet will be installed in the <root> folder.
Click Menu > New Folder to choose another folder.
6. Click OK to confirm the installation.
98 Experiencing Multimedia
To run MIDlets on your phone
1. On the Home screen, click Start > Java.
2. Select a MIDlet from the list using the NAVIGATION CONTROL.
3. Click Launch or press ENTER to run the MIDlet.
To stop running a MIDlet(s), click Yes on the Terminate MIDlet screen, or press END ( ).
Manage MIDlets
You can update a MIDlet, run it from a different folder, run it on the background, change its display name,
check its security, view its certificate, or uninstall it from your phone.
To change the display name of a MIDlet
1. On the Home screen, click Start > Java.
2. Select a MIDlet using the NAVIGATION CONTROL.
3. Click Menu > Actions > Rename.
4. Enter a new name for the MIDlet and click Save.
Note You cannot change the name of a MIDlet suite.
To uninstall a MIDlet
Before you uninstall a MIDlet/MIDlet suite, make sure that it is not running.
1. On the Java screen, select the MIDlet/MIDlet suite using the
NAVIGATION CONTROL.
2. Click Menu > Actions > Uninstall.
3. Click OK to confirm.
Note Click Menu > Uninstall All to uninstall all individual MIDlets from
your phone at one go. However, you cannot uninstall a single
MIDlet from a MIDlet suite; you must uninstall the complete
MIDlet suite.
To run a MIDlet on the background
1. On the Java screen, select the MIDlet/MIDlet suite using the NAVIGATION CONTROL.
2. Click Menu > Options > Background Running.
To configure MIDlet security
You can adjust security settings for each MIDlet/MIDlet suite.
1. On the Java screen, select a MIDlet using the NAVIGATION CONTROL.
2. Click Menu > Actions > Security.
3. Configure the security options, such as Local Connection, Location information access, Recording,
Messaging, and so on.
Experiencing Multimedia 99
Please note that some features may not be available for all MIDlets/MIDlet suites. Following are the security
options that you can set for a running MIDlet/MIDlet suite.
Security Option Description
Local connection Determines whether a MIDlet/MIDlet suite requires a specia cable to function.
Location information access Determines whether a running MIDlet/MIDlet can access location related
information.
Recording Enables a MIDlet/MIDlet suite to record sound or pictures.
Messaging Determines whether a MIDlet/MIDlet suite can send and/or receive text (SMS)
messages.
Local Connectivity Enables a MIDlet/MIDlet suite to access services, such as Bluetooth.
Net Access Determines whether a MIDlet/MIDlet suite can access the Internet.
Auto Start Enables a MIDlet/MIDlet suite to run at specified times, or any time.
Read user data Determines whether a running MIDlet/MIDlet can read data from your phone
memory or from a storage card installed on your phone.
Write user data Determines whether a running MIDlet/MIDlet can write data from your phone
memory or from a storage card installed on your phone.
100 Experiencing Multimedia
Chapter 10
Using Other Applications
10.1 Microsoft® Office Mobile
10.2 Microsoft® Office Word Mobile
10.3 Microsoft® Office Excel® Mobile
10.4 Microsoft® Office PowerPoint® Mobile
10.5 Adobe Reader LE
10.6 Speed Dial
10.7 Voice Speed Dial
102 Using Other Applications
10.1 Microsoft® Office Mobile
Microsoft® Office Mobile consists of three applications that let you view and edit Microsoft Office
documents. These 3 applications are:
• Microsoft® Office Word Mobile lets you view and edit Microsoft Word documents and text files.
• Microsoft® Office Excel® Mobile lets you view and edit Microsoft Excel worksheets.
• Microsoft® Office PowerPoint® Mobile lets you view Microsoft PowerPoint slides.
To learn how to copy files, see “Managing and Backing Up Files” in Chapter 4.
10.2 Microsoft® Office Word Mobile
Microsoft® Office Word Mobile gives you editing and viewing capabilities for your Word documents and text
files.
To open Word Mobile
• Click Start > Office Mobile > Word Mobile.
Notes
• Word Mobile does not fully support some features of the PC version of Microsoft Word. Some data and formatting may
be lost when you save the document on your phone.
• Currently, Word Mobile also does not support viewing of Office 2007 Word documents. Added support for Office 2007
format may be available in late 2007. Visit Windows Mobile® Web site for details.
Open and view documents
To open a document
1. In Word Mobile, click Menu and choose the location where the .doc, .rtf, or .txt file is saved.
2. Locate the file you want to open and click Select.
Note You can only open one document at a time. You must close the opened document first before you can open another
document.
To change the zoom ratio
• Click View and then on the menu, select the zoom ratio to use.
• Click View > Wrap to Window to adjust the text flow so that the text wraps based on the screen size.
This way, you do not need to scroll right to read long paragraphs or sentences.
Note Text in tables cannot be wrapped.
To change scrolling preference
• Click Menu > Scroll Up/Down and then select By Page or By Line.
To find a word in a document
1. Click Menu > Find.
2. Type in the word you want to find in Find What. Select Match case and/or Whole words only if
needed.
3. Click Find.
Using Other Applications 103
To close the document
• Click Menu > Close File.
Edit and send documents
In order to edit Word documents or text files, you need to switch to Edit mode. To switch to Edit mode, click
Menu > Edit Mode.
To type words into the document
1. In the document, use the NAVIGATION CONTROL to position the cursor where you want to insert the
text.
Tip Click Menu > Format to change the font format. You can use Bold, Italic, Underline, and Highlight.
2. Type in the text using the keypad or QWERTY keyboard.
Tip If you are using a formatting style and you want to revert to no formatting style, click Menu > Format and select the
desied formatting style from the menu.
To save the document
1. Click Menu > File > Save As.
2. Type in the Name you want to use for the edited document and select the Location where you want to
save the document.
3. Click Save.
To send the document through e-mail
1. Click Menu > File > Send.
2. In the Messaging screen, select the e-mail account you want to use to send the document and click
Select.
3. In the e-mail, the file is automatically appended as an attachment.
4. Enter the recipient name and click Send.
10.3 Microsoft® Office Excel® Mobile
Microsoft® Office Excel® Mobile gives you editing and viewing capabilities for your Excel worksheets and
workbooks.
To open Excel Mobile
• Click Start > Office Mobile > Excel Mobile.
Note Excel Mobile does not fully support some features of the PC version of Microsoft Excel. Some data and formatting may
be lost when you save the workbook on your phone.
View workbsheets
To open a workbook file
1. In Excel Mobile, click Menu and choose the location where the .xls file is saved.
2. Locate the workbook file you want to open and click Select.
Note You can only open one workbook at a time. You must close the opened workbook (.xls file) first before you can open
another.
104 Using Other Applications
By default, the worksheet opens in Full Screen mode, to change the view mode, press the left SOFT KEY (to
show the View menu) and click View > Full Screen.
To view the contents of a cell
There are times that the text in a cell cannot be fully displayed onscreen. To view the text in the cell in its
entirety, select the cell and then click View > Cell Text.
To immediately view an area in the worksheet
1. In the worksheet, click View > Overview.
2. Use the NAVIGATION CONTROL to move the rectangular marquee to the area you want to view.
3. Press ENTER.
To use Freeze Pane
1. Select the cell that is after and below the row and column you want to freeze.
For example, if you want to freeze column E and row 4, you should select cell F5.
2. Click View > Freeze Panes. To unfreeze the panes, click View > Unfreeze Panes.
To change the zoom ratio
• Click View > Zoom and then select the zoom ratio to use.
To switch to another worksheet
If your Excel workbook file has multiple worksheets, you can go to a different worksheet by clicking View >
Sheet and then selecting the worksheet you want to view.
Edit and send worksheets
In order to edit Excel worksheets, you need to switch to Edit mode. To switch to Edit mode, click Menu > Edit
Mode.
To edit the cell text
1. Select the cell whose text you want to edit and click Menu > Edit > Cell Text.
2. Type in the text and click Done.
To delete the cell content
• Select the cell whose content you want to delete and click Menu > Edit > Clear Cell.
Tip You can select multiple cells by clicking Menu > Select and then choosing what to select in the worksheet.
To edit the cell range of a defined name
If your worksheet contains defined names created in Microsoft Excel on the PC, you can edit the cell range of
the defined name.
1. Click Menu > Edit > Define Name.
2. In Range Name, select the name whose cell range you want to change.
3. In Refers to, type in the new cell range.
4. Click Done.
Using Other Applications 105
To delete cells
• Select the cell you want to delete and click Menu > Edit > Delete Cells.
Tip You can select multiple cells to delete by clicking Menu > Select and then choosing what to select in the worksheet.
To copy and paste cell contents
1. Select the cell(s) you want to copy and then click Menu > Edit > Copy.
Tip You can select multiple cells to delete by clicking Menu > Select and then choosing what to select in the worksheet.
2. Select the cell(s) where you want to copy the cell contents to and click Menu > Edit > Paste.
To insert a row or column
Select the cell where you want to insert a row or column and then click Menu > Insert > Row or Column. If
you insert a row, the row will be inserted above the selected cell; if you insert a column, the column will be
inserted at the left of the selected cell.
Tip You can also shift the contents of a row or column. To shift, select the cell you want to shift and click Menu > Insert >
Shift Right or Shift Down.
To go to a cell
• Click Menu > Tools > Go To and then enter the Cell reference or name. Click OK.
Tip You can also sort and find text in the worksheet by clicking Menu > Tools > Sort or Find.
To undo and redo an action
• Click Menu > Undo [Action] or Redo [Action].
To save the worksheet
1. Click Menu > File > Save As.
2. Type in the Name you want to use for the edited worksheet and select the Location where you want
to save the worksheet.
3. Click Save.
To send the document through e-mail
1. Click Menu > File > Send.
2. In the Messaging screen, select the e-mail account you want to use to send the worksheet.
3. In the e-mail, the file is automatically appended as an attachment.
4. Enter the recipient name and click Send.
106 Using Other Applications
10.4 Microsoft® Office PowerPoint® Mobile
Microsoft® Office PowerPoint® Mobile gives viewing capabilities for your PowerPoint presentations.
To open PowerPoint Mobile
• Click Start > Office Mobile > PowerPoint Mobile.
Note Files created in Office 2007 PowerPoint is currently not supported yet. Added support for Office 2007 format may be
available in late 2007. Visit Windows Mobile® Web site for details.
To open a file
1. In PowerPoint Mobile, click Menu and choose the location where the .ppt file is saved.
2. Locate the file you want to open and click Select.
To go through the slides of the presentation
Press NAVIGATION right to go forward in the presentation; press NAVIGATION left to go back to the previous
action or slide of the presentation.
You can also go to a particular slide in your presentation by pressing the right SOFT KEY (to show Menu) and
clicking Menu > Go to Slide then choosing the slide to go to.
To view a custom show
You can view custom shows that you created on Microsoft PowerPoint on your phone.
1. Press the right SOFT KEY to show Menu.
2. Click Menu > Custom Show and then select the custom show you want to view on the list.
To zoom in on a slide
1. Press the right SOFT KEY to show Menu.
2. Click Menu > Zoom In.
Note You cannot go the next or previous slide when you zoom in. You need to zoom out first to be able to go to the next or
previous slide. To zoom out, click Menu > Zoom Out.
To set PowerPoint Mobile preferences
1. Press the right SOFT KEY to show Menu.
2. Click Menu > Options.
3. Set the Orientation and Playback options and click Done.
To show links in a slide
On your phone, you can show and activate hyperlinks in slides that you created on the PC version of Microsoft
PowerPoint .
1. Press the right SOFT KEY to show Menu.
2. Click Menu > Show Links.
3. Press ENTER to activate the hyperlink. If there is more than one hyperlink on the slide, use NAVIGATION
CONTROL to select the hyperlink you want to activate.
To end the presentation
• Press the right SOFT KEY (to show End) and click End.
Using Other Applications 107
10.5 Adobe Reader LE
Adobe Reader LE allows you to view Portable Document Format (PDF) files.
When you open a password-protected PDF file, you will be prompted to enter the password before the file
can be opened.
To open a PDF file on your phone
1. Click Start > Document Viewer > Adobe Reader LE.
2. Click Open.
3. Browse to a folder and click the PDF file you want to open.
Note To open another PDF file, click Open > Menu > Browse For File.
You can also open a PDF file from File Explorer by clicking it.
To navigate through a PDF file
You can do any of the following:
• Use the NAVIGATION CONTROLS to scroll through the pages.
• Click Menu > Go To and select an option to go to a specific
page in the PDF file.
While reading a PDF file, click Menu to open a list of options that lets you zoom in, directly go to a bookmark,
find text in the file, and more.
10.6 Speed Dial
You can create speed dial entries for frequently-called numbers or frequently-accessed items so you can dial a
number or access an item by pressing a single key.
To create a speed dial entry for a contact
1. On the Home screen, click Start > Calls > Contacts.
2. Select a contact.
3. Press ENTER to view the contact details.
4. Select the desired phone number and click Menu > Add to Speed Dial.
5. Enter appropriate details in Name, Value, and Keyboard assignment.
6. Click Done. To quit at any time during this process, click Menu > Cancel.
To create a speed dial entry for an item
1. On the Home screen, click Start then choose (just highlight) the item you want.
2. Click Menu > Add Speed Dial.
3. Enter details in Name, Value, and Keyboard assignment.
4. Click Done. To quit at any time during this process, click Menu > Cancel.
Note The first speed dial location is generally reserved for your voice mail. Speed Dial uses the next available location
by default. If you want to place a number in a location that is already used, the new number replaces the existing
number.
108 Using Other Applications
To retrieve a voice mail message
• On the Home screen, press and hold 1 to access your voice mailbox, and follow the prompts to retrieve
your messages.
To make a call or launch a program using Speed Dial
• If you have assigned a speed dial (for example, the second location) to a contact or a program in Speed
Dial, you can simply press and hold the 2 key on the phone keypad to dial the contact’s number or open
the program.
To delete a speed dial entry
1. On the Home screen, click Start > Calls > Speed Dial.
2. Select the desired entry and click Menu > Delete.
10.7 Voice Speed Dial
You can record a voice tag for a phone number, e-mail address, or Web page address that is stored in Contacts.
When you speak out the voice tag using Voice Speed Dial, your phone automatically dials the associated
phone number, opens an e-mail message using the associated address, or goes to the associated Web page.
To create a voice tag for a phone number, e-mail address, or URL in Contacts
1. On the Home screen, click Start > Calls > Contacts.
2. Select the desired contact, and press ENTER to open the contact card.
3. Select the item to which you want to assign a voice tag.
4. Click Menu > Add Voice Tag.
5. After a “beep” sound, begin recording the voice tag (preferably one easy-to-recognize word).
6. When the voice tag is successfully trained, the phone will play back the voice tag. Click OK.
7. Enter appropriate details in Name, Value, and Keyboard assignment.
8. Click Done to save the new voice tag.
To quit at any time during this process, click Menu > Cancel.
To create a voice tag for a program
To create a voice tag for a program, for example, Calendar, do the following:
1. On the Home screen, click Start > Calendar. (Do not press ENTER when Calendar is selected.)
2. Click Menu > Add Voice Tag.
3. After the message/beep, say “Calendar.”
4. When the voice tag is successfully trained, the phone will play back the voice tag. Click OK.
5. Enter appropriate details in Name, Value, and Keyboard assignment. Click Done to save the new voice
tag. To quit at any time during this process, click Menu > Cancel.
To make a call or launch a program using the voice tag
1. Click Start > Voice Speed Dial.
2. After a “beep” sound, say the recorded voice tag that you have assigned to the phone number you
want to call or the program you want to launch. The phone plays back the voice tag and then dials the
number or launches the associated program.
Using Other Applications 109
Note You can also drag and hold the Volume Adjustment Slider down to launch Voice Speed Dial and record voice tags
for numbers, e-mail addresses, URL in Contacts, and programs.
Tip If the phone does not recognize your voice tag, please try again and speak clearly and reduce the surrounding
noise.
To edit, delete, and play voice tags
1. On the Home screen, click Start > Calls > Speed Dial.
2. Select the desired voice tag from the list.
3. Do any of the following:
• To change the voice tag, click Menu > Edit, make changes, and click Done.
• To delete the voice tag, click Menu > Delete.
To play back an existing voice tag at any time, click Menu > Play Voice Tag.
110 Using Other Applications
Appendix
A.1 Specifications
A.2 Regulatory Notices
A.3 Additional Safety Information
112 Appendix
A.1 Specifications
System information
Processor/
Chipset/Speed
QUALCOMMTM MSM 7500, 400 MHz
Memory • ROM-Nand Flash: 256 MB
• RAM: 96 MB DDR
Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared
by the Operating System, applications, and data, the actual available memory is less than what is written
.
Operating system Microsoft® Windows Mobile® 6 Standard
Display
Type 2.4” QVGA Transmissive LCD with white LED backlight
Resolution 240 x 320 dots resolution at 262K Colors
Orientation Landscape
CDMA/EVDO Dual-band module
Functionality CDMA2000
Mode Dual band: 800 and 1900 MHz
Antenna Internal
Camera module
Type 2.0 Megapixels CMOS with fixed lens
Resolution • UXGA: 1200 x 1600
• SXGA: 960 x 1280
• VGA: 480 x 640
• QVGA: 240 x 320
• QQVGA: 120 x 160
Connection
I/O port HTC ExtUSB™ : an 11-pin mini-USB and audio jack in one
(ExtUSB is a proprietary connection interface that is trademarked by HTC)
Bluetooth V 1.2 with A2DP support, Class 2 transmit power
Wi-Fi IEEE 802.11b/g compliant, Internal WLAN antenna
Infrared IrDA SIR
Audio
Microphone/
speaker
Built-in microphone and speaker, Hands-free
Headphone AAC/AMR/WMA/WAV/MP3 codec
Physical
Dimension 111.5 mm(L) x 63 mm(W) x 14.2 mm(T)
Weight 120g with battery pack
Appendix 113
Controls and lights
Buttons • CAMERA
• NAVIGATION CONTROL/ENTER
• POWER (on and off)/Quick List
• Left and Right SOFT KEYs
• HOME/Comm Manager
• BACK
• TALK (start call/answer call)
• END/Lock
• Jog Wheel
• Back Button
Keyboard 10 Column QWERTY
LED •
One bi-color (Green/Red) LED for battery, connection, network status, notification, and charging
status.
• One multi-color (Blue/Amber/Green) LED for Bluetooth, GPS, and Wi-Fi connection status.
Expansion slot
microSD slot microSD memory card
Power supply
Battery Li-Ion 1200 mAh removable, rechargeable battery
Talk time Up to 3.5 hours
Standby Up to 212 hours
AC Adapter • Voltage range/frequency: 100 ~ 240V AC, 50/60Hz
• DC output: 5V and 1A
A.2 Regulatory Notices
Regulatory Agency Identifications
For regulatory identification purposes, your product is assigned a model number of IRIS100.
FCC ID: NM8IRIS100. IC: 4115A-IRIS100.
To ensure continued reliable and safe operation of your device, use only the accessories listed below with your
IRIS100.
The Battery Pack has been assigned a model number of IRIS160.
This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1
Amp power supply unit.
Federal Communications Commission Notice
DECLARATION OF CONFORMITY
This wireless device, IRIS100, manufactured by High Tech Computer Corp., complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Responsible Party: High Tech Computer Corp.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
114 Appendix
installation. If this equipment does cause harmful interference to radio or TV reception, which can be
determined by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help. Modifications not expressly
approved by the manufacturer could void the user’s authority to operate the equipment.
FCC RF EXPOSURE INFORMATION
In August 1996, the Federal Communications Commission (FCC) of the United States with its action in
Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and international standards bodies. The design of this device
complies with the FCC guidelines and these international standards.
Modifications
The FCC requires the user to be notified that any changes or modifications made to the device that are
not expressly approved by High Tech Computer Corporation may void the user’s authority to operate the
equipment.
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-
309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act)
to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure
reasonable access to telecommunications services for persons with hearing disabilities.
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users
may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to
this interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device
users find phones that may be compatible with their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.
If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to
hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. IRIS100 is rated
M3.
Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may
help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference
noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered
acceptable for normal use. A sum of 6 is considered for better use. A sum of 8 is considered for best use.
Appendix 115
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level
rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage”
while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a
signal quality that is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous
with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and
measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.
For information about hearing aids and digital wireless phones
FCC Hearing Aid Compatibility and Volume Control:
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC:
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm
SAR Information
SAR Value:
• 1.190 W/kg @1g (Head)
• 0.501W/kg @ 1g (Body)
THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when
used with the High Tech Computer Corp. accessories supplied or designated for this product. Use of other
accessories may not ensure compliance with the FCC RF exposure guidelines.
Your wireless mobile CDMA phone is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based on the safety standards
previously set by both U.S. and international standards bodies:
• American National Standards Institute (ANSI) IEEE. C95.1-1992.
• National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986.
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996.
• Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile CDMA phone employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. Tests for SAR are conducted with
the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the device while operating can be
well below the maximum value. This is because the device is designed to operate at multiple power levels
so as to use only the power required to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output. Before a device model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the limit established by the government adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model.
116 Appendix
The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the
FCC and can be found under the Display Grant section of https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/
GenericSearch.cfm after searching on FCC ID: NM8IRIS100.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &
Internet Association (CTIA) web-site as http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile CDMA phone used by the public is 1.6 Watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements.
Normal condition only to ensure the radiative performance and safety of the interference. As with other
mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and
for the safety of personnel, it is recommended that no part of the human body be allowed to come too close
to the antenna during operation of the equipment.
FCC Enhanced 911 (E911) Rules
BACKGROUND
The Federal Communications Commission (FCC) requires wireless carriers to transmit specific latitude and
longitude location (Automatic Location Identification = ALI) information as well as “911” calls to Public Safety
Answering Points (PSAPs) to identify the location of the caller in case of emergency.
Generally, the rules require that carriers identify an E911 caller’s location within 50 meters of the actual
location for 67 percent of calls and within 150 meters of the actual location for 95 percent of calls.
IRIS100’s ALI CAPABILITY
The IRIS100 is an ALI-capable smartphone equipped with a GPS (Global Positioning System) receiver
supporting a satellite-based GPS ALI-capable network to comply with the FCC’s ALI requirements.
The network compliance with the above FCC requirements is dependent on: (a) the use of digital technology
by the wireless network; (b) GPS satellite signals being able to reach the handset (such transmissions do not
always work indoors, for example) ; and (c) handset signals reaching wireless “base stations” (atmospheric and
environmental conditions may cause variations in handset receiving signal strength).
Also the transmission of the ALI information is subject, in part, to system constraints within the wireless
network to which the E911 signal is transmitted and over which UT Starcom has no control.
Finally, customers are advised that the IRIS100’s ALI capability is to be used for E911 purposes only.
For more information about placing emergency calls, see Chapter 2.
Compliance with Other FCC Regulations
OPERATING PROCEDURES
Never violate any of the following Rules and Regulations of the FCC when using your device. Such violations
are punishable by fine, imprisonment or both.
• Never use obscene, indecent, or profane language.
• Never use your device to send false distress calls.
• Never wiretap or otherwise intercept a phone call, unless you have first obtained the consent of the
parties participating in the call.
• Never make any anonymous calls to annoy, harass, or molest other people.
• Never charge another account without authorization, to avoid payment for service.
Appendix 117
• Never willfully or maliciously interfere with any other radio communications.
• Never refuse to yield the line when informed that it is needed for an Emergency Call. Also, never take
over a line by stating falsely that it is needed for an emergency.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of
the device.
Important Note
IC Radiation Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance.
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law
on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the
reuse, recycling and other forms of recovery of such wastes so as to reduce disposal.
The WEEE logo (shown at the left) on the product or on its box indicates that this product must not
be disposed of or dumped with your other household waste. You are liable to dispose of all your
electronic or electrical waste equipment by relocating over to the specified collection point for
recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and
electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety
of human health and environment. For more information about electronic and electrical waste
equipment disposal, recovery, and collection points, please contact your local city center, household
waste disposal service, shop from where you purchased the equipment, or manufacturer of the
equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of
27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (RoHS) and its amendments.
118 Appendix
A.3 Additional Safety Information
This section provides more safety information in addition to the information at the beginning of the
user manual.
When Driving
Do Not Use The PC Functions Of Your Smartphone While Driving Or Walking
Never use the personal computer functions of your device while driving an automobile or any other
moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location
before using your device. Failure to do so could result in serious bodily injury in a traffic accident.
When driving:
• Always secure your device in its leather pouch.
• Never place your device on the passenger seat or anyplace else in the car where it can become a
projectile during a collision or stop.
• An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious injury could result.
Never store or transport flammable liquids, gases or explosive materials in the same compartment of your
automobile as the device or any of its accessories, as possible sparking in the device could cause ignition or
explosion.
Never use your device while walking. Usage while walking could result in bodily injury caused by inattention
to automobile traffic or other pedestrian hazards.
Using The Phone Function Of Your Smartphone While Driving Is Extremely Dangerous
Talking on or using your Smartphone while driving is extremely dangerous and is illegal in some states.
Remember, safety comes first. Check the laws and regulations on the use of phones in the areas where
you drive. Always obey them.
If you must use the phone function while driving, please:
• Give full attention to driving. Driving safely is your first responsibility.
• Use hands-free operation and/or one-touch, speed dialing, and auto answer modes.
• Pull off the road and park before making or answering a call.
WARNING: Failure to follow these instructions could lead to serious personal injury and possible property damage.
When Using Your Device Near Other Electronic Devices
Your wireless handheld portable smartphone is a low power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may
not be shielded against the RF signals from your wireless smartphone; therefore, use of your smartphone
must be restricted in certain situations.
In addition, the computer portion of your device produces low levels of RF energy due to the generation of
digital timing pulses by its clock oscillator circuits. Your device has been equipped with internal shielding
to minimize stray emissions of RF energy. However, use of the computer functions of your device must be
restricted in certain situations.
Appendix 119
PACEMAKERS
The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the independent research by and recommendations
of Wireless Technology Research.
Never come closer than six (6) inches to a person with a heart pacemaker implant when using your device.
Doing so could result in interference with the function of the pacemaker.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is
turned ON.
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize the potential for interference.
Note This is not necessary if the smartphone is not held to the ear.
• If you have any reason to suspect that interference is taking place, turn the phone OFF immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may
want to consult your service provider, or call the customer service line to discuss alternatives.
For more regulatory information about hearing devices, see “FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices”.
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the manufacturer of your device to determine if it
is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this
information.
HOSPITALS AND HEALTH CARE FACILITIES
Turn your device OFF in health care facilities when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
ELECTRONIC DEVICES IN VEHICLES
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer or its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
POSTED FACILITIES
Turn your device OFF where posted notices so require.
Turn Off Your Device Before Flying
AIRCRAFT
FCC regulations prohibit using the transmitting and phone functions of your device while in the air. In
addition, most airline regulations prohibit the on-board use of portable PCs (and all other portable electronic
devices that could potentially emit stray RF energy), particularly during take-offs and landings, to prevent any
possible interference with the reception of signals by airborne electronic navigational devices.
120 Appendix
Turn your device OFF before boarding an aircraft. Always request and obtain prior consent and approval of an
authorized airline representative before using your device aboard an aircraft. Always follow the instructions of
the airline representative whenever using your device aboard an aircraft, to prevent any possible interference
with airborne electronic equipment.
Turn Off Your Device in Dangerous Areas
BLASTING AREAS
To avoid interfering with blasting operations, turn your device OFF when in a “blasting area” or in areas posted
“Turn off two-way radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your device OFF when in any area with a potentially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling
areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or articles, such
as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your
vehicle’s engine.
General Safety
Your smartphone is a high quality piece of equipment. Before operating, read all instructions and cautionary
markings on the product, battery and adapter/charger.
Failure to follow the directions below could result in serious bodily injury and/or property damage due to
battery liquid leakage, fire or rupture.
DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an
open flame or heat-emitting equipment.
DO NOT drop your device or subject it to severe shock. When not using, lay down the unit to avoid possible
damage due to instability.
DO NOT expose this equipment to rain or spilled beverages.
DO NOT use unauthorized accessories.
DO NOT disassemble the device or its accessories. If service or repair is required, return unit to an authorized
UT Starcom cellular service center. If the unit is disassembled, the risk of electric shock or fire may result.
Never allow metallic objects, such as staples and paper clips, to get into the inside of your device.
Never touch the liquid that might leak from a broken liquid crystal display. Contact with this liquid could
cause a skin rash. If the crystal display liquid should come into contact with the skin or clothing, wash it
immediately with clean water.
In the event that the device emits an unusual odor or sound or generates smoke, immediately disconnect the
AC charger from the power outlet, then detach the battery.
Antenna Safety
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could impair call quality, damage your device, or result in violation of FCC regulations. Please
contact your local dealer for replacement antenna.
Do not use the device with a damaged antenna. If a damaged antenna comes into contact with the skin, a
minor burn may result. Please contact your local dealer for replacement antenna.
Appendix 121
Battery Safety
Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for
assistance should you need a replacement battery.
DOs
• Only use the battery and charger approved by the manufacturer.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C).
• If the battery is stored in temperatures above or below the recommended range, give it time to warm
up or cool down before using.
• Completely drain the battery before recharging. It may take one to four days to completely drain.
• Store the discharged battery in a cool, dark, and dry place.
• Purchase a new battery when its operating time gradually decreases after fully charging.
• Properly dispose of the battery according to local regulations.
DON’Ts
• Don’t attempt to disassemble the battery – it is a sealed unit with no serviceable parts.
• Don’t expose the battery terminals to any other metal object (e.g., by carrying it in your pocket or purse
with other metallic objects such as coins, clips and pens). This can short circuit and critically damage
the battery.
• Don’t leave the battery in hot or cold temps. Otherwise, it could significantly reduce the capacity and
lifetime of the battery.
• Don’t dispose of the battery into a fire.
Lithium ion batteries are recyclable. When you replace the removable battery, please request the repair center
to recycle the battery in accordance with RBRC standards. When disposing of the battery by yourself, please
call RBRC at (800) 822-8837 for proper disposal tips.
Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or
skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the
eyes thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into
contact with the skin or clothing, wash it away immediately with clean water.
Adapter/Charger
Use the Correct External Power Source
A product should be operated only from the type of power source indicated on the electrical ratings label.
If you are not sure of the type of power source required, consult your authorized service provider or local
power company. For a product that operates from battery power or other sources, refer to the operating
instructions that are included with the product.
The AC Charger designed by UT Starcom for this unit requires the use of a standard 120 V AC power source for
device operation.
Never attempt to disassemble or repair an AC charger. Never use an AC charger if it has a damaged or worn
power cord or plug. Always contact a UT Starcom authorized service center, if repair or replacement is
required.
Never alter the AC cord or plug on an AC charger. If the plug will not fit into the available outlet, have a proper
outlet installed by a qualified electrician.
Never allow any liquids or water to spill on an AC charger when it is connected to an AC power source.
122 Appendix
Always use the authorized UT Starcom AC charger to avoid any risk of bodily injury or damage to your cellular
phone or battery.
Never attempt to connect or disconnect the AC charger with wet hands. Always unplug the AC charger from
the power source before attempting any cleaning. Always use a soft cloth dampened with water to clean the
equipment, after it has been unplugged.
Handling the cord on this product or cords associated with accessories sold with this product, will expose you
to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash
hands after handling.
Always disconnect the travel charger or desktop charger from the power source when it is not in use.
.
Index
124 Index
Symbols
1xEVDO 72
1xRTT 72
A
Accessibility settings
- confirmation time out 38
- in-call alert volume 38
- multipress time out 38
- system font size 38
ActiveSync
- overview 16
- synchronize 31, 62
Add and remove programs 40
Add attachment to message 57
Adobe Reader 16, 107
Alarm 38
Alarm settings 37
Alerts 37
Answer/end call 26
Attachments 58
B
Backlight time out 38
Back up files 41
Battery
- battery information 19
- battery management 38
- check battery power 20
- low battery 20
Beam via Bluetooth 78
Bluetooth
- beaming 78
- hands-free headset 77
- modes 76
- overview 76
- partnerships 76
- stereo headset 77
- synchronize 32
- visible 76
Bluetooth Explorer 16, 79
Browsing the Web 74
C
Calculator 16
Calendar 16, 47
Call History 16
Camera
- camera button 90
- icons and indicators 91
- overview 16
- zoom 92
Camera settings 92
Capture formats 90
Capture modes 90
Clear Storage 16, 43
Close running programs 40
Comm Manager 16, 72
Company Directory 66
Compose e-mail message 57
Compose MMS message 54
Confirmation time out 38
Connecting to Wi-Fi Network 75
Connect phone to Internet 73
- Wi-Fi 75
Connect phone to private network 73
Contacts
- beam contact information 47
- call a contact 46
- create a new contact 46
- find a contact 46
- overview 17
- send contact information via a text message 47
- use 46
- view & edit a contact 46
Contacts picture (capture mode) 90
Copy
- files between phone and PC 41
- media files from PC to phone 95
- pictures and videos 93
- sound file to phone 37
Currency setting 36
Customize Home screen 36
D
Date setting 36
Device lock 42
Dial-up connection 72
Digitally sign messages 67, 68
Digital Rights Management (DRM) 95
Digital signature
- sign 67
- verify 67
Direct Push 62
Display time out 38
E
E-mail
- messages 57
- Outlook 55
- POP3/IMAP4 56
- security 67
Emergency call 27
Encrypt messages 67, 68
Enter text and numbers 18
Error reporting 39
Event notification 37
Excel Mobile 103
- overview 17
Exchange Server
- schedule synchronization 62
- start synchronization 62
Exclude e-mail address when replying to all 59
Index 125
F
Fetch Mail 63
File Explorer 17, 41
Filter e-mail 57
Find Contacts 66
Flag your messages 64
Flight mode 72
Font size (display) 38
Forward message 53, 58
G
Games 17
Get Applications 17
H
Home screen
- change background 36
- customize 36
- overview 16, 36
I
In-call alert volume 38
Insert Battery 15
Insert pause in dialing sequence 27
Install ActiveSync 31
Install Micro SD Card 15
Install MIDlets
- from Internet 97
- from PC 97
- locally 97
International call 27
Internet 72
Internet Explorer Mobile 17, 74
J
Java
- overview 17
- use 97
K
Keyboard
- lock 42
- sound 37
L
Language/locale setting 36
LED indicator lights 14
Licensed and protected media 95
Lock
- keyboard 42
- phone 42
M
Make call
- from Call History 25
- from Contacts 25
- from Home Screen 24
- from Speed Dial 25
Managing meeting requests 65
Memory 40
Messaging 17, 52
Messenger 17
Microsoft ActiveSync 31
Microsoft Windows Mobile Device Center 30
MMS
- access MMS 53
- create and send 54
- MMS settings 54
Modem Link 17
Mute call 26
N
NAVIGATION CONTROL 13
Number format 36
O
Office Mobile 102
- Excel Mobile 103
- PowerPoint Mobile 106
- Word Mobile 102
Operating system version 39
Optimize power performance 20
Out-of-office 65
Outlook e-mail 55
Owner information 38
P
Panorama (capture mode) 90
Parts and accessories 12
Pause in dialing sequence 27
PDF 107
Personal information 38
Phone program 23
Phone specification 39
Photo (capture mode) 90
Pictures & Videos 17, 93
Picture theme (capture mode) 90
Play media 96
PowerPoint Mobile 106
- overview 17
Power management 38
Profile 37
Programs
- ActiveSync 16
- Adobe Reader 16
- Bluetooth Explorer 16
- Bluetooth Settings 16
- Calculator 16
- Calendar 16, 47
126 Index
- Call History 16
- Camera 16, 90
- Clear Storage 16, 43
- Comm Manager 16
- Contacts 17, 46
- Excel Mobile 17
- File Explorer 41
- Games 17
- Get Applications 17
- Internet Explorer 17, 74
- Java 17
- Messaging 17, 52
- Messenger 17
- Modem Link 17
- MP3 Trimmer 17
- Phone 23
- Pictures & Videos 17, 93
- PowerPoint Mobile 17
- Speed Dial 17, 107
- Tasks 17, 48
- Task Manager 17, 40
- Text Messages Retry 17
- Video Recorder 17, 90
- Voice Notes 17, 49
- Voice Recorder 17
- Voice Speed Dial 17
- Windows Live 17
- Windows Media Player Mobile 17, 94
- Wireless Sync 17
- Word Mobile 17
Program icons 16
Q
Quick List 18
QWERTY keyboard 18
R
Receive
- call 26
- MMS message 55
Regional settings 36
Regulatory notices 113
Reply message 53, 58, 59
Reset phone 43
Restart phone 43
Review screen 92
Ring tone 24, 49
Run MIDlets 98
S
Search for e-mails on the Exchange Server 64
Secure/Multipurpose Internet Mail Extension (S/MIME) 67
Securing Wi-Fi Connection 75
Send
- email/SMS message 57
- MMS message 54
Send and download e-mails 58
Send appointments 48
Send messages 57
Settings 17
Setting up e-mail accounts 55
Set up ActiveSync on PC 31
Set up Home screen 36
SharePoint documents 65
Share contact information 47
Sounds 37
Speakerphone 26
Speed Dial 17, 25, 107
Sports (capture mode) 90
Start menu 18
Status indicators 21
Stop programs 40
Synchronize
- ActiveSync 31
- change information types 31
- music and video 33
- schedule synchronization with Exchange Server 62
- via Bluetooth 32
- Windows Media Player 33
System font size 38
T
Tasks 17, 48
Task Manager 17, 40
Text Messages Retry 17
Time setting 36
U
Unlock screen clock 37
V
Verify digital signature 67
Video (capture mode) 90
Video Recorder 17, 90
Viewing media files 93
View and reply to MMS messages 55
View your appointments 47
Visible (Bluetooth) 76
Voice Notes 17, 49
Voice Recorder 17
Voice Speed Dial 17
Voice tag
- create voice tag for phone number, e-mail address, or URL in
Contacts 108
- create voice tag for program 108
- edit, delete, and play voice tags 109
VZAccess Manager
- install 80
- launch 84
- set up Internet access 80
- text messaging 86
- user interface 84
- use Modem Link 81
Index 127
W
Web browser 74
Wi-Fi 75
Windows Live 17
Windows Live Mobile 86
Windows Media Player
- file formats 94
- menus 94
- overview 17
- troubleshooting 96
Windows Mobile Device Center 30
Windows Mobile software version 39
Windows Mobile Update 39
Wireless Sync 17
Word Mobile 102
- Overview 17
X
xT9 mode 19
Z
Zoom 92
128 Index