HTC JDV GSM/GPRS/EDGE PDA phone with WLAN and Bluetooth User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1003303
Application ID	HeRu2FPtpOAshmMQJCMXIg==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	188.02kB (2350226 bits)
Date Submitted	2008-09-19 00:00:00
Date Available	2008-09-30 00:00:00
Creation Date	2008-09-16 15:19:34
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-09-16 15:19:44
Document Title	User Manual 2
Document Creator	Adobe InDesign CS2 (4.0)

156 Internet
When you tap Stop (
) or finish watching the entire video, you are presented
with options on what you can do next.
Tap to go to the
next page of
related videos.
If no action
is taken, it
automatically goes
to the next page
after 10 seconds.
Tap to view details
about the video
you just watched.
Tap to go back to
the previous page
of related videos.
Tap to send the link
to the video you just
watched to another
person using one
of the Messaging
accounts.
Tap to add the
video to your
Bookmarks.
Tap to play back
the video again.
Bookmarks
You can store frequently viewed videos into Bookmarks for quick access.
To view Bookmarks
On the YouTube screen, tap
watch it.
. Tap a video to
To add a video into Bookmarks
Do one of the following:
•
After watching a video, tap
•
On the list of videos, tap
on the video
you want to add to Bookmarks and then tap
Internet 157
To delete a video from Bookmarks
1. On the Bookmarks screen, tap Edit.
2. Tap
on the video you want to remove from Bookmarks.
3. On the confirmation screen, tap Yes.
4. Tap Done.
History
View recently watched videos on the History screen.
To view History
On the YouTube screen, tap
Note
. Tap a video to watch it.
To clear the History list, tap Clear.
158 Internet
8.5 Using Streaming Media
Streaming Media lets you stream live broadcasts or on-demand media content
from the web. The media is sent in a continuous stream to your device and is played
as it arrives, along with the audio.
The Streaming Media program allows you to play 3GP and MPEG-4 files. It also
supports playback of SDP (Session Description Protocol) files.
To access streaming content via Opera Mobile
In Opera Mobile, you can open a web page containing RTSP (Real Time Streaming
Protocol) links to streaming media content then play the content in the Streaming
Media program.
1. On the Home screen, slide to the Internet tab and tap Browser.
2. In the address bar, enter the URL address of the web page that contains the
RTSP link to the desired *.3gp, *.mp4, or *.sdp file.
3. On the web page, tap the RTSP link.
4. Streaming Media then automatically opens and starts playing the file. During
playback, use the button controls to play/pause, switch to full screen, rewind,
and fast forward.
Rewind
Drag to go backward
or forward on the
video.
Tap to toggle
between playing or
pausing the video
playback.
Tap to switch to full
screen mode. In full
screen mode, tap the
screen to switch back.
Fast forward
Internet 159
To stream media files directly on the Streaming Media Player
Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files
directly on the program.
Note
Before you launch the Streaming Media program, make sure that you are connected
to the Internet.
1. Tap Start > Programs > Streaming Media.
2. From the program, tap Connect.
3. Enter the URL for the web site (rtsp://) and the file name.
4. Tap Connect.
5. Streaming Media then starts playing the file. During playback, use the button
controls to play/pause, switch to full screen, rewind, and fast forward.
To view streaming video information
Tap Menu > Properties to view the properties and general information of a
streaming video clip, such as video codec, audio codec, dimension, frames, and
duration of the video.
To configure streaming video connection settings
Tap Menu > Options to configure streaming settings:
•
Playback tab. Specify the memory space (in terms of duration) to allot for
storing video and audio data while streaming media.
•
Networks tab. Choose the connection to use and specify a range of port
numbers to use for streaming.
•
Video tab. Select the Use Landscape mode when watching in full screen
check box to automatically switch to landscape mode when watching in full
screen.
160 Internet
8.6 Using Windows Live™
Windows Live™ gives you a full Internet experience on your device. Windows Live™
helps you to find information, pursue your interests, and get in touch with friends
and family on the Internet easier.
Windows Live™ offers the following key features:
•
Live Search Bar, which lets you search for information on the web.
•
Live Messenger, the next generation of MSN Messenger Mobile.
•
Live Mail, the next generation of Hotmail.
•
Live Contacts, your address book for storing Live Mail, Live Messenger and
Hotmail contacts.
Set up Windows Live™
The first time you use Windows Live™, sign in using your Windows Live™ ID, which is
your Windows Live™ Mail or Hotmail address, and password.
To set up Windows Live™ for the first time
1. Tap Start > Programs > Windows Live and then tap Sign in to Windows
Live.
2. Tap the links to read the Windows Live™ Term of Use and the Microsoft
Privacy Statement. After reviewing them, tap Accept.
3. Enter your Windows Live™ Mail or Hotmail address and password, select the
Save password checkbox, then tap Next.
4. Tap Next.
5. Choose what information you want to sync online with your device.
Internet 161
If you select Store Windows Live contacts
in your mobile phone’s contact list, your
Windows Live™ contacts will be added to the
contact list and to Windows Live™ Messenger
on your device.
If you select Sync e-mail, your Windows
Live™ Mail or Hotmail inbox messages will be
downloaded to your device.
6. Tap Next.
7. After synchronization is complete, tap Done.
The Windows Live™ interface
On the Windows Live™ main screen, you will see a search bar, navigation buttons,
and an area where you can show and customize your profile.
1 Search bar
2 Navigation buttons. Tap the left
or right arrow to switch between
Windows Live™ Messenger, Windows
Live™ Mail, and Sync status.
3 Tap to change the display name,
picture, or personal message.
4 Tap Menu to access and change
settings.
162 Internet
Windows Live™ Messenger
With this mobile version of Windows Live™ Messenger, you enjoy many of the
same cool features that you get from the desktop version, which include the
following:
•
•
•
•
•
•
•
•
Note
Instant messaging via text and voice
Multiple conversations
Insert emoticons
Contact list with presence
Send and receive files including photos
Change status/display name
View contacts by online status, groups, and
more
Send messages even when a contact is
offline
Before you can use Windows Live™ Messenger, your device must be connected to
the Internet. For information about setting up an Internet connection, see “Ways of
Connecting to the Internet” in this chapter.
Launch Messenger and sign in
To open Windows Live™ Messenger
Do one of the following:
•
Tap Start > Programs > Messenger.
•
On the Windows Live™ main screen, tap the left or right arrow until you see
Messenger, then tap it.
Internet 163
To sign in and out
1. Tap Sign in on the Messenger screen.
2. If this is your first time to sign in, a message appears to inform you that your
messenger contacts will be added to the contact list on your device. Tap OK
to add them.
Signing in may take several minutes, depending on your connection speed.
3. To sign out, tap Menu > Sign Out.
To start and end conversations
1. In the contact list, select a contact, then tap Send IM to open a message
screen.
2. Enter your text message in the text entry area of the message screen.
3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the
list.
4. Tap Send.
5. To end a conversation with the current contact, tap Menu > End
conversation.
Tips
• To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any
file.
• To invite one or more contacts to the conversation, tap Menu > Options > Add
participant.
• To send a voice message, tap Voice Clip on a message screen then start talking.
After you have recorded a message, tap Send.
164 Internet
Add Windows Live™ contacts
You can add new Windows Live™ contacts in Windows Live™ Messenger or in
Contacts.
To add a Windows Live™ contact in Live Messenger
1. Tap Menu > Add new contact.
2. Enter the e-mail address of the contact, then tap OK.
To add a Windows Live™ contact in Contacts
1. On the Home screen, slide to the People tab and then tap All People.
2. Tap New, then tap Windows Live.
3. In the IM box, enter the e-mail address of the contact, which can be a
Windows Live ID or any other e-mail address.
Tip
You can fill in other information about the contact, if desired. This is not
necessary if you will communicate with the contact only through Windows Live™
Messenger or Live Mail.
4. Tap OK.
5. Follow the remaining instructions to add the new contact to your Windows
Live™ contact list.
Internet 165
8.7 Using Your Device as a Modem (Internet Sharing)
Internet Sharing connects your desktop or notebook computer to the Internet by
using your device’s data connection (GPRS or EDGE, for instance). You can choose to
connect via USB or Bluetooth.
Notes
• Make sure your device has a SIM card installed, and your device has a GPRS/3G or
phone dial-up modem connection. If your device has not been set up with a data
connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
For more information about setting up these connections, see "GPRS/3G" and
"Dial-up" in this chapter.
• If you want to use a USB cable connection, you must first install Windows Mobile
Device Center or Microsoft ActiveSync version 4.5 or later on the computer.
• If you want to use a Bluetooth connection, make sure your computer has built-in
Bluetooth capability. If your computer does not have Bluetooth, you can connect
and use a Bluetooth adapter or dongle.
• Before using Internet Sharing, disconnect from Windows Mobile Device Center or
ActiveSync on your computer.
To set up your device as a USB modem
1. On your device, tap Start > Programs >
Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the
name of the connection that your device uses to
connect to the Internet.
4. Connect your device to the computer using the
USB cable.
5. Tap Connect.
166 Internet
To use your device as a Bluetooth modem
For the computer to use the Internet connection of your device, activate Internet
Sharing on your device, then set up a Bluetooth Personal Area Network (PAN)
between the computer and your device.
1. On your device, turn on Bluetooth and set it to visible mode by following
the steps in “To turn Bluetooth on and make your device visible” section in
Chapter 9.
2. Initiate a Bluetooth partnership from your device by following the steps in “To
create a Bluetooth partnership”
3. Tap Start > Programs > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that
your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your
device:
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and
Sharing Center.
b. Click Manage network connections and then under Personal Area
Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection
icon.
Internet 167
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
Note
If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle to connect your computer and device via Bluetooth. Refer to the
Bluetooth adapter/dongle documentation for more information.
8. On the Internet Sharing screen on your device, check if a connected
status message is displayed, which indicates that your computer has been
successfully connected to the Internet using your device as a Bluetooth
modem.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
168 Internet
8.8 Using RSS Hub
RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the
Internet. It monitors Internet news channels and downloads the most current news
updates and podcasts so you are instantly informed of breaking news and events.
For more information and tips on using RSS Hub, see Help on your device.
Note
Make sure you have an active Internet connection (such as EDGE or GPRS) before
using RSS Hub.
Subscribe to and organize news channels
You must subscribe to news channels before you can receive RSS feeds.
To subscribe to news channels
1. Tap Start > Programs > RSS Hub, then tap Continue.
2. In the New Channel Wizard screen, select the Choose from a list of known
Channels option, then tap Next. A list of RSS channels is displayed.
Category
Channels
Tap to load pre-selected RSS channels.
Internet 169
Note
If the RSS channel you want to subscribe to is not in the list of known channels,
tap Back, then select another option on the New Channel Wizard screen. For
more information on these other options, see the Help on your device.
3. Select the check boxes of the RSS channels you want to subscribe to, then tap
Finish.
Tip
Channels are grouped by categories. If you want to select all channels in a
category, select the category check box.
4. The channel list appears. Tap Refresh to update the channels.
Tap to select the
channel category
to display
Channel list
Channel is updated.
Tap it to view the
headlines.
Tap to update
the channels
Headline count
Tap to cancel
channel updating
170 Internet
To add new channels
1. In the channel list, tap Menu > Channel > New to open the New Channel
Wizard screen.
2. Select an option, then follow screen instructions to add new channels. For
more information on New Channel Wizard options, see Help on your device.
To filter the channels in the display
In the channel list, tap Menu > View, then select:
•
Updated to display only those channels with unread headlines.
•
All to display all subscribed channels.
Manage channel categories
To view all the channels in a particular category, tap All Categories in the upper left
area of the channel list, then tap the category you want to display.
To add a new category, tap Menu > Categories in the channel list to display all
categories, then tap Menu > New.
To rename or delete a category, tap Menu > Categories in the channel list to
display all categories, select a category, then tap Menu > Rename or Menu >
Delete.
If you want to change the channel category, tap and hold the channel in the
channel list, then tap Change Category. Select a new category and tap OK.
Internet 171
View and organize headlines
Tap a channel in the channel list to display the headlines for that channel.
Headline or news
summary contains
a keyword
Headline has
been read
New or unread
headline
Tap to return to
the channel list
Tap a headline to open
the news summary screen
Audio/Video/Image
file attachment is
downloading
Tap to download audio/
video file attachment
New or unread headlines display in bold and are marked with a blue newspaper
icon. Headlines that have been read are marked with a gray newspaper icon.
172 Internet
View the news summary
Tap a headline in the headline list to display the news summary.
Channel name
Headline and
read status
Audio/Video/Image
file attachment.
Tap to download
the file.
News summary
Tap to open the news
item in Opera Mobile.
See “Using Opera
Mobile” in this chapter
for details.
Tap to return to the headline list
To change view options
In the news summary screen, tap Menu to change the text size, fit the text to the
screen (text wrap), or enable ClearType for better viewing.
Internet 173
To download, play, or save podcasts
1. When you see an audio or video file attachment
in the news summary, do one of the following to
download the file:
•
Tap Menu > Podcasts > Start Download.
•
Tap the Download audio/Download video
link below the audio/video file icon.
Tip
To cancel the file download, tap Menu >
Podcasts > Cancel Download, or tap Cancel
download below the audio/video file icon.
2. After downloading the file, do one of the
following:
•
Tap Menu > Podcasts > Play or tap Play
audio/Play video below the audio/video file
icon to play back the file.
•
Tap Menu > Podcast > Save to save a copy
of the file to the device main memory or
storage card.
To send the headline link via e-mail
1. In the news summary screen, tap Menu > Send Link via Email.
2. Messaging opens and displays the Account Picker screen. Tap the e‑mail
account you want to use to send the headline link.
A new e-mail message is then created with the headline link.
3. Specify the e-mail recipients, then send it.
Note
For more information on how to compose e-mails, see “Using E-mail” in Chapter 6.
174 Internet
To view the next or previous news summary
In the news summary screen, tap Menu > Next or Menu > Previous, or press
NAVIGATION left or right.
For more information about the features and configuring RSS Hub, refer to the
online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9
Bluetooth
9.1 Bluetooth Modes
9.2 Bluetooth Partnerships
9.3 Connecting a Bluetooth Hands-free or
Stereo Headset
9.4 Beaming Information Using Bluetooth
9.5 Bluetooth Explorer and Bluetooth
File Sharing
9.6 Printing Files via Bluetooth
176 Bluetooth
9.1 Bluetooth Modes
Bluetooth is a short-range wireless communications technology. Devices with
Bluetooth capabilities can exchange information over a distance of about eight
meters without requiring a physical connection.
Bluetooth on your device operates in three different modes:
• On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled
devices, but not vice versa.
• Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can
detect your device.
• Off. Bluetooth is turned off. In this mode, you can neither send nor receive
information using Bluetooth.
Notes
• By default, Bluetooth is turned off. If you turn it on, then turn off your device,
Bluetooth also turns off. When you turn on your device again, Bluetooth
automatically turns on.
• Turn off Bluetooth when not in use to conserve battery power, or in places where
using a wireless device is prohibited, such as on board an aircraft and in hospitals.
To turn Bluetooth on and make your device visible
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Mode tab.
2. Select the Turn on Bluetooth and Make this device visible to other devices
check boxes.
3. Tap OK. The Title bar will show
to indicate that the device is in Visible
mode.
To turn off Bluetooth visibility after a certain period of time
You can automatically turn off Bluetooth visibility after a specified period of time.
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Timeout tab.
2. In Turn off Visible mode, select the time before your device’s Bluetooth
visibility turns off. Tap OK.
Bluetooth 177
9.2 Bluetooth Partnerships
A Bluetooth partnership is a relationship that you create between your device and
another Bluetooth-enabled device in order to exchange information in a secure
manner.
To create a Bluetooth partnership
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab.
2. Tap Add new device. Your device displays the names of other Bluetooth
devices within range.
3. Tap the device name in the box, then tap Next.
4. Specify a passcode to establish a secure connection. The passcode can be 1
up to 16 characters.
5. Tap Next.
6. Wait for the paired device to accept the partnership. The receiving party
needs to enter the same passcode that you specified.
7. After the receiving party enters the passcode, a message box appears on your
device confirming the partnership.
Tip
Tap Advanced to change the paired device name and to set the services you
want to use for the paired device. After setting the name and options, tap Save.
8. Tap Done.
Note
Creating a Bluetooth partnership between two devices is a one-time process. Once
a partnership is created, the devices can recognize the partnership and exchange
information without entering a passcode again.
178 Bluetooth
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection. The passcode must be
between 1 and 16 characters.
4. Tap Next.
5. Tap Done. You can now exchange information with the paired device.
Tips
• To rename a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab of the Bluetooth screen, then tap Edit.
• To delete a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab, then tap Delete.
9.3 Connecting a Bluetooth Hands-free or Stereo
Headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset
such as a car kit with your device. Your device also supports A2DP (Advanced Audio
Distribution Profile) which allows you to use a Bluetooth stereo headset for handsfree phone conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are turned
on and within close range, and that the headset is visible. Refer to the
manufacturer’s documentation to find out how to set the headset in visible
mode.
2. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab > Add new device.
Bluetooth 179
3. Tap the name of the Bluetooth headset, then tap Next. The device will
automatically pair the device with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat step 1 to 2 above. Tap and hold the name of the Bluetooth stereo headset and
tap Set as Wireless Stereo.
9.4 Beaming Information Using Bluetooth
You can beam information, such as contacts, calendar items, tasks, and files from
your device to your computer or to another Bluetooth-enabled device.
Note
If your computer does not have built-in Bluetooth capability, you need to connect
and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1. Turn on Bluetooth on your device, and make your device visible. For
information about this, see “To turn Bluetooth on and make your device
visible”.
2. Set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
Note
If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle and enable the adapter/dongle to be discovered by other
devices. Refer to the Bluetooth adapter’s documentation for more information.
If your computer has Windows Vista or Windows XP SP2 and your
computer’s Bluetooth adapter is supported by your Windows version, do the
following steps:
180 Bluetooth
a. On your computer, open Bluetooth Devices from the Control Panel, then
click the Options tab on the Bluetooth Devices window.
b. For Windows Vista, select Allow Bluetooth devices to find this
computer.
For Windows XP, select Turn discovery on and Allow Bluetooth devices
to connect to this computer.
c. Create a Bluetooth partnership between your device and computer. For
information about creating a partnership, see “Bluetooth partnerships”.
d. In the Options tab of Bluetooth Devices, select Show the Bluetooth
icon in the notification area.
e. To enable your computer to receive Bluetooth beams, right-click the
Bluetooth icon in the notification area at the bottom-right corner of
your computer screen and select Receive a File. You are now ready to
beam.
3. On your device, select an item to beam. The item can be an appointment in
your calendar, a task, a contact card, or a file.
4. To beam a contact, tap Menu > Send Contact > Beam.
To beam other types of information, tap Menu > Beam [type of item].
5. Tap the device name to which you want to send the item.
6. If you beamed a calendar, task, or contact item to your computer and it is not
automatically added to Outlook, select File > Import and Export in Outlook
to import it.
To beam information to a Bluetooth-enabled device such as another Windows
Mobile-powered device, follow steps 1 to 5 in the above procedure.
Tips
• The default folder on your computer where beamed items are stored may be
C:\Documents and Settings\your_username\My Documents in Windows XP or
C:\Users\your_username\My Documents in Windows Vista.
• For your device to receive Bluetooth beams, tap Start > Settings > Connections
tab > Beam and make sure the Receive all incoming beams check box is selected.
Bluetooth 181
9.5 Bluetooth Explorer and Bluetooth File Sharing
Bluetooth Explorer searches for other Bluetooth devices that have file sharing
enabled and lets you access their Bluetooth shared folder. You can copy files from
and to their shared folder, and create subfolders in it. When you enable Bluetooth
file sharing on your device, other Bluetooth-enabled devices will also be able to
access your Bluetooth shared folder.
To enable Bluetooth Explorer and Bluetooth file sharing on your device
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > FTP tab.
2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth
device folder visible in File Explorer.
3. Select the Enable File Sharing check box.
You can use the default Bluetooth shared folder, or tap Browse to use
another folder as your shared folder.
4. Tap OK.
To use Bluetooth Explorer
1. Bluetooth Explorer is integrated with the File Explorer program. You can
open it by tapping Start > Programs > Bluetooth Explorer or by tapping
the down arrow ( ) on the upper left of File Explorer screen then tapping
Bluetooth.
182 Bluetooth
2. Bluetooth Explorer then scans for other
Bluetooth devices that have file sharing
enabled. From the list, tap to select a
Bluetooth device you want to connect to.
You may need to enter a passcode in order
for you to connect to the selected device.
If there are files contained in the Bluetooth
shared folder on the other device, you
will be able to see them on the Bluetooth
Explorer screen.
3. Select one or more files, then tap Menu > Edit and choose to cut or copy the
files.
4. Tap Up twice.
5. Navigate to the folder where you want to paste the files on your device, then
tap Menu > Edit > Paste.
9.6 Printing Files via Bluetooth
Connect your device to a Bluetooth printer to print contact information,
appointment details, images, and other file types.
Note
You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats.
Before you start printing, make sure to turn on the Bluetooth printer and to turn
on Bluetooth on your device. To turn on Bluetooth, tap Start > Programs > Comm
Manager, then tap the Bluetooth button.
Bluetooth 183
To print contact information
1. On the Home screen, slide to the People tab and then tap All People.
2. Select the contact whose information you want to print.
3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device
starts to search for Bluetooth devices.
4. Select the Bluetooth printer and tap Menu > Send File.
5. Set the printing options you want, then tap Print.
To print a calendar appointment
1. Tap Start > Calendar, then select (highlight) the appointment whose details
you want to print.
2. Follow steps 3 to 5 in the “To print contact information” procedure.
To print a JPEG file
1. In Pictures & Videos, locate the JPEG file you want to print.
2. Tap and hold the JPEG image file and then on the menu, tap Print via
Bluetooth.
3. Follow steps 3 to 5 in the “To print contact information” procedure:
To print a text file
1. In File Explorer, locate the text file you want to print.
2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth.
3. Follow steps 3 to 5 in the “To print contact information” procedure:
184 Bluetooth
Chapter 10
Navigating on the Road
10.1 Google™ Maps (Available by Country)
10.2 Guidelines and Preparation for Using GPS
10.3 Downloading Satellite Data via QuickGPS
186  Navigating on the Road
10.1 Google™ Maps (Available by Country)
Google™ Maps lets you track your current location, view real-time traffic situations,
and receive detailed directions to your destination. It also allows you to search and
locate places of interest or even a contact address.
Note
You need an active data connection or Wi-Fi connection to use Google Maps.
To launch Google Maps
Tap Start > Programs > Google Maps.
Note
The first time you launch Google Maps, you will be asked to accept terms and
conditions when using Google Maps. You must agree to the terms and conditions for
you to be able to launch and use Google Maps.
The Google Maps screen
Tap to zoom in
on the map.
Your current location.
Tap to zoom
out on the map.
Tap to search for places of
interest and addresses.
Notes
Tap to open a menu where you
can set Google Maps to find and
display your current location,
get directions, see traffic
information, look up a contact
address, and more.
• Currently, traffic information is only available for the U.S.
• Tap Menu > Options > Reset Google Maps to reset the Google Map cookies,
history of search terms, preferences, and image cache.
• Tap Menu > Help > Tips to learn more about the program and its many features.
Navigating on the Road 187
Search for a place of interest
You can easily search and locate a place of interest such as hotels, restaurants, and
other places using Google Maps. Google Maps can also show details on how to
contact and reach the place of interest from your current location.
Note
You can also enter keywords, street addresses, or postal codes when searching places
using Google Maps.
1. On the Google Maps screen, tap Search.
2. Enter the place of interest you want to find, and then tap Search:
3. Search results will then be listed. Tap the desired place from the list to view its
address, phone number, and other details.
4. On the Address tab, you can:
•
Tap the web address to go to the web site of the place of interest.
Note
•
This information only appears when the web site of the place of interest is
available.
Tap the [phone number] to call the place of interest that you have
selected.
188 Navigating on the Road
•
Tap Directions to here or Directions from here to get directions on how
to get to the place of interest from your current location or vice versa.
•
Tap Search nearby to search for other places of interest near your current
location.
•
Tap Send as text message to send the contact information of the place of
interest via SMS.
For more information about Google Maps, you can visit the following web site:
http://www.google.com/gmm/index.html.
10.2 Guidelines and Preparation for Using GPS
If you install a GPS software on your device, please follow these guidelines before
and when using your device as a GPS device.
•
Do not operate the GPS system while driving. The plotted GPS route is only
for driving reference. It should not interfere with actual driving behavior.
•
Do not leave your device in a vehicle or expose the device to direct sunlight
to avoid overheating the battery, which could pose damage to the device or
risk to the vehicle.
•
When using the device inside a vehicle, use the car holder to mount the
device securely in place. Avoid placing the device in the areas shown in the
following diagram:
Navigating on the Road 189
1 Do not place where it will block the driver’s vision.
2 Do not place where air bags could deploy.
3 Do not place anywhere in the vehicle without securing the device in the
holder.
•
Please use the GPS system cautiously. Users shall be liable for any damages
resulting from negligent operation of the system.
•
The GPS signal cannot pass through solid non-transparent objects. Signal
reception may be affected by obstructions such as high-rise buildings,
tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s
visor contains metal, it will be difficult for the GPS signal to pass through.
•
Wireless communication products (such as mobile phones or radar-detecting
devices) may interfere with the satellite signal, resulting in unstable signal
reception.
•
The Global Positioning System (GPS) is built and operated by the US
Defense Department. The Department is responsible for the accuracy and
maintenance of the system. Any changes that the Department makes may
affect the accuracy and function of the GPS system.
190 Navigating on the Road
10.3 Downloading Satellite Data via QuickGPS
Before you start using your device for GPS navigation, open the QuickGPS program
first to download ephemeris data (current satellite position and timing information)
onto your device. This data is needed to determine the GPS position of your current
location.
QuickGPS downloads ephemeris data from a web server, instead of from the
satellites, using the Internet connection on your device, which can be via Wi-Fi,
ActiveSync or GPRS/3G. This significantly speeds up the time for determining your
GPS position.
To open QuickGPS
Tap Start > Programs > QuickGPS.
To download data
Tap Download on the QuickGPS screen.
On the screen, initially, you will see the Valid
time of the downloaded data. As time passes,
the remaining days and hours of validity will be
shown.
To speed up GPS positioning, download the
latest ephemeris data when the validity of the
data expires.
Navigating on the Road 191
Download options
To configure download times, tap Menu > Options and choose from the available
options:
•
Remind me when data expires.
Enables your device to display a reminder message when the validity of the
ephemeris data has expired.
When you see the reminder message, tap Menu to dismiss the reminder or to
set the snooze time so that you will be reminded again. Tap OK to open the
QuickGPS program and download the latest data.
•
Auto download when data expires.
Allows ephemeris data to be automatically updated onto your device when
the data has expired.
•
Auto download when connected to PC via ActiveSync.
Allows ephemeris data to be automatically downloaded via ActiveSync to
your device when your device is connected to your computer. Your computer
must be connected to the Internet in order to download data.
Note
The ephemeris data is stored on HTC web servers. QuickGPS is preconfigured to
connect to these servers.
192  Navigating on the Road
Chapter 11
Experiencing Multimedia
11.1 Taking Photos and Videos
11.2 Viewing Photos and Videos Using Album
11.3 Using Windows Media® Player Mobile
11.4 Using Audio Manager
11.5 Using Audio Booster
194 Experiencing Multimedia
11.1 Taking Photos and Videos
Use Camera to take photos and record video clips.
To open the Camera screen
1. On the Home screen, slide to the Photos and Videos tab.
2. Tap the Camera icon (
) or the Video Camera icon (
).
The screen orientation automatically switches to landscape mode when you open
Camera.
Tip
You can also tap Start > Programs > Camera to open the Camera program.
To exit the Camera
Tap the screen first to display the Camera screen icons, and then tap the
Exit icon (
).
Capture modes
The camera on your device allows you to capture pictures and video clips by using
various built-in modes that provide you flexibility in taking your shots.
To change the capture mode
If icons are not showing on the screen, tap
the screen first to display the Camera screen
icons, and then do one of the following to
select a capture mode:
•
Press NAVIGATION left or right
(Landscape orientation).
•
Tap the middle icon at the bottom of
the screen (the icon displayed is based
on the current Capture mode.). On the
Capture Mode menu, tap the capture
mode you want to use.
Current capture mode
Experiencing Multimedia 195
You can select from the following capture modes:
Icon
Capture Mode
Photo Captures standard still images.
Video Captures video clips, with or without accompanying audio.
Panorama Captures a sequence of still images continuously in one
direction, and allows stitching of all the images to create a panoramic
view of a scenery.
MMS Video Captures video clips suitable for sending with MMS
messages.
Contacts Picture Captures a still image and gives you the option to
immediately assign it as a Photo ID for a contact.
Picture Theme Captures still images and places them within frames.
Supported file formats
Using the available capture modes, the camera in your device captures files in the
following formats:
Capture mode
Format
Photo / Contacts Picture /
Picture Theme / Panorama
JPEG
Video / MMS Video
H.263 (.3gp) ; MPEG-4 (.mp4)
196 Experiencing Multimedia
Capture photos and videos
Use the ENTER button as the shutter release when capturing photos and videos:
•
Press the ENTER button to take a photo or to start capturing video.
•
In Video or MMS Video mode, press ENTER again to stop recording.
•
In Picture Theme or Panorama mode, press ENTER for each shot you need to
take.
On-screen controls and indicators
Tap the screen to display the controls and indicators.
Photo, Video, MMS Video, and
Contacts Picture modes
6 5
When capturing in Video and MMS
Video modes
1 Zoom control. Tap
Tip
to zoom in, or
to zoom out.
You can also press NAVIGATION up/down (Landscape orientation) to zoom in or
out.
2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for
details.
Experiencing Multimedia 197
3 Capture mode. Displays the current capture mode. Tap to open the Capture
Mode menu where you can choose from available capture modes.
4 Menu. Tap to display the Menu Panel. See “Menu Panel” for details.
5 Exit. Tap to exit the Camera program.
6 Remaining information indicator. In Photo, Contacts Picture, Picture Theme,
and Panorama modes, this shows the remaining/available shots of pictures
based on the current settings.
In Video and MMS Video modes, this shows the remaining duration that can
be recorded. While recording video, this shows the recorded duration.
7 Recording indicator. Flashes when recording a video.
Picture Theme mode
8 Template
Selector icon. In Picture Theme mode, tap to toggle among
different templates.
9 Progress
indicator. In Picture Theme and Panorama modes, this shows the
number of consecutive shots.
198 Experiencing Multimedia
Menu Panel
The Menu Panel provides a quick way of adjusting the most common camera
settings and lets you access more advanced camera settings. On the Camera screen,
tap
to open the Menu Panel. To adjust a setting, keep tapping a button on
the panel, for instance, White Balance, to cycle through the available settings. To
access advanced options, tap
Note
The available settings on the panel depend on the selected capture mode.
1 Resolution. Tap to select the resolution to use when taking photos or
capturing videos.
2 Storage. Select where you want to save your files. You can either save the files
to the main memory ( ) or to a storage card (
if one is installed..
3 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off when
in the Photo or Contacts Picture mode. When you press the ENTER button to
capture a still image, it starts to count down, then captures a still image after
the time expires.
4 Advanced. Tap to access the advanced camera settings. See “Advanced
Options” for details.
Experiencing Multimedia 199
5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On
the Brightness bar, tap
to decrease, or
to increase the brightness level.
Tap outside the Brightness bar to apply the change.
6 White Balance. White balance enables the camera to capture colors more
accurately by adjusting to different lighting conditions. White balance
settings include: Auto (
), Daylight (
), Night (
), Incandescent (
),
and Fluorescent (
).
Zooming
Before capturing a photo or a video clip, you can zoom in to make the object in
focus move closer, or zoom out to make the object move farther away.
To zoom in
Press NAVIGATION up (Landscape orientation), or tap
To zoom out
Press NAVIGATION down (Landscape orientation), or tap
The camera zoom range for a photo or a video clip depends on the capture mode
and resolution. Refer to the table for more information.
Capture mode
Photo
Resolution
Zoom range
3M (2048 x 1536)
1.0x to 2.0x
2M (1600 x 1200)
1.0x to 2.0x
1M (1280 x 960)
1.0x to 2.0x
Large (640 x 480)
1.0x to 2.0x
Medium (320 x 240)
1.0x to 4.0x
200 Experiencing Multimedia
Capture mode
Video
Panorama
MMS Video
Contacts Picture
Picture Theme
Resolution
Zoom range
CIF (352 x 288)
1x and 2x
Large (320 x 240)
1x and 2x
Medium (176 x 144)
1x and 2x
Small (128 x 96)
1x and 2x
Large (640 x 480)
1x and 2x
Medium (320 x 240)
1x, 2x and 4x
Medium (176 x 144)
1x and 2x
Small (128 x 96)
1x and 2x
Medium (240 x 320)
Determined by the current
template
1.0x to 4.0x
Depends on the size of the
selected template
Experiencing Multimedia 201
The Review screen
After capturing, the Review screen lets you view, send, or delete the photo or video
clip by tapping an icon at the bottom of the screen.
Review screen
icons
Icon
Function
Back Return to the live Camera screen.
Delete Delete the captured image or video.
View View the captured image in the Album program.
Play Play back the captured video or MMS video in the Album program.
Send Send the captured image or video via e-mail or MMS.
Assign to Contact After capturing in Contacts Picture mode, tap this icon to
assign the photo to a selected contact.
202 Experiencing Multimedia
Advanced Options
The Advanced Options let you adjust options for your selected capture mode
and set Camera program preferences. Access the Advanced Options by tapping
Advanced on the Menu Panel.
You can either tap on-screen or press NAVIGATION up/down (Landscape
orientation) to navigate through the Advanced Options screen.
Tap an item to
change the setting.
Tap to go through
the different
Advanced Camera
Settings screens.
Tap to go back to
the Camera screen.
•
Review Duration. Set a time length for displaying the captured image/video
on the Review screen. Select No Limit if you do not want to impose a time
limit. Select No Review to immediately return to the live Camera screen after
capturing and saving.
•
Quality. Select the JPEG image quality level for all captured still images.
Choose from Basic, Normal, Fine, and Super Fine.
•
Capture Format (Video and MMS Video mode). Select the desired file format.
•
Time Stamp (Photo mode). Choose whether or not to include the shooting
date and time on captured photos.
•
Keep Backlight. Turn the backlight on or off. This overrides your device
backlight settings while you are using the camera.
•
Shutter Sound. Choose whether or not you want the camera to make a
shutter sound when you press the ENTER button.
Experiencing Multimedia 203
•
Image Properties. This option lets you adjust the image Contrast,
Saturation, and Sharpness.
Tap a property to adjust.
Tap to reset all properties to their default
values.
Tap to save the settings.
Tap
/ or press NAVIGATION
left/right (Landscape orientation) to
increase/decrease the value.
Tap to close the Image Properties screen
without applying and saving the changes.
•
Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
•
Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
•
Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note
•
If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
Counter. To reset the file naming counter back to 1, tap Reset.
204 Experiencing Multimedia
•
Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
•
Grid (Photo mode). Choose whether or not to show a grid on the Camera
screen. Showing a grid helps you frame and center your subject easily and
accurately.
Grid marks
•
Record with Audio (Video and MMS Video mode). Select On to record audio
with the captured video clips, or select Off to capture video without audio.•
•
Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
•
Template (Picture Theme mode). Select a template.
•
Template Folder (Picture Theme mode). By default, templates are stored
in the \My Documents\Templates folder on the device’s Main Memory. If
you transferred some templates to a storage card (via File Explorer), set this
option to Main + Card to specify that templates are located in both the main
memory and the storage card.
Experiencing Multimedia 205
•
Show Reminder (Contacts Picture mode). Select On if you want the Camera
to always display a message that confirms whether or not to assign the
captured picture to a contact.
•
Direction (Panorama mode). Choose in what direction images will be
stitched in a panorama.
•
Stitch Count (Panorama mode). Select the desired number of images to be
captured and stitched into a panorama.
•
Help. Tap to open the Camera program help file.
•
About. Tap to display version and copyright information.
11.2 Viewing Photos and Videos Using Album
Use Album to view images and videos in your device. Album offers a host of
features that let you rotate images, view your images as a slideshow, use images as
contact pictures, and more.
Note
Album can only display files in the BMP, GIF, PNG, JPG, Animated GIF, 3GP, MP4, and
WMV formats.
Launch Album
Do one of the following:
•
On the Home screen, slide to the
Photos and Videos tab and tap
Album.
•
In the Camera program, tap
•
Tap Start > Programs > Album.
Note
Album is always displayed in
landscape mode.
Tap to open the Camera program.
206 Experiencing Multimedia
Select a photo or video to view
1. On the main Album screen, tap Albums and then select the album to view.
The contents of the album are then displayed on the main Album screen.
2. Browse through the files by sliding your finger upward or downward.
3. Do one of the following:
•
Tap an image to view it in full screen mode. See “View an image” for
details.
•
Tap a video file (files with the
icon) to play back the video file. See “Play
back video” in this chapter for details.
•
Select a still image and then tap Menu > Slideshow to view the images in
the album as a slideshow. Animated GIF and video files will not be played
back in the slideshow. See “To view still images as a slideshow” in this
chapter for details.
View an image
While viewing an image in full screen, tap the screen or press ENTER to open the
on-screen menu.
Tap to send the
image using one
of the Messaging
accounts.
Tap to start the
slideshow.
Tap to go back to
the main Album
screen, Photos
and Videos tab, or
Camera.
Tap to open a menu
where you can save the
screen image as a photo
for a contact, save the
current image as a new
file, delete the image, and
view file properties.
Experiencing Multimedia 207
Tip
You can delete multiple files at once by selecting Menu > Delete Items on the main
Album screen and then selecting the files to delete.
To rotate the image
While viewing an image in full screen, make a half-circle gesture on the screen with
your finger to rotate the image.
To rotate the image 90 degrees clockwise,
make a downward half-circle gesture on
the screen.
To rotate the image 90 degrees
counter-clockwise, make an upward
half-circle gesture on the screen.
To view the next or previous image
When viewing images in full screen, go to the next image by swiping your finger
across the screen from right to left. Go back to the previous image by swiping your
finger from left to right.
208 Experiencing Multimedia
To zoom in or out of an image
While viewing an image, make a full-circle gesture on the screen with your finger.
Slide your finger clockwise on an area to
zoom in on that area.
Slide your finger counter-clockwise to
zoom out.
Tips
• When you zoom in on an image, double-tap the screen to automatically zoom out
and fit the image to the screen.
• When you zoom in on an image, tap and hold the screen so you can pan the
image.
• When you zoom in on an image, tap the screen to open the on-screen menu. On
the on-screen menu, tap
and then select Save Screen Image to save the
image on-screen as a new file.
Experiencing Multimedia 209
To view still images as a slideshow
While viewing the slideshow, tap the screen to show playback controls.
Tap to open the
Slideshow Options
screen where you can set
the transition effect to
use, time per slide, and
orientation of the images.
Tap to return to
the main Album
screen or the
Photos and
Videos tab.
Tap to go back to the
previous image.
Tip
Tap to play or pause the
slideshow playback.
Tap to go to the
next image.
If the images are in your favorite album, you can start the slideshow from the Photos
and Videos tab on the Home screen. On the Photos and Video tab, tap Slideshow.
210 Experiencing Multimedia
Play back video
While playing back video, tap the screen to show the playback controls.
Drag to go forward
or backward in the
video.
Elapsed time
Total duration
Tap to go back to
the beginning of
the video.
Tap to stop
video playback.
Tap to play or pause
video playback.
Tip
If the video is in your favorite album, you can start the video playback from the
Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Close Album
Close Album by tapping
on the main Album screen. When viewing files in full
screen mode, tap the screen to show the on-screen menu or playback controls and
then tap
to go back to the main Album screen.
Experiencing Multimedia 211
11.3 Using Windows Media® Player Mobile
Windows Media® Player Mobile plays digital audio and video files that are stored
on your device or on a network, such as on a web site.
Video File Formats Supported
Windows Media Video
MPEG4 Simple Profile
H.263
H.264
Motion JPEG
File Extensions
.wmv, .asf
.mp4
.3gp, .3g2
.mp4, .3gp, .3g2, .m4v
.avi
Audio File Formats Supported
Windows Media Audio
WAVE
MP3
MIDI and SP MIDI
AMR Narrow Band
AMR Wide Band
AAC, AAC+, and eAAC+
MPEG4 audio
QCELP
EVRC
File Extensions
.wma
.wav
.mp3
.mid, .midi, .rmi
.amr, .3gp
.awb,.3gp
.aac, .mp4, .m4a, .3gp
.m4a
.qcp, .3g2
.qcp
To open Windows Media® Player Mobile
Tap Start > Programs > Windows Media.
212 Experiencing Multimedia
About the controls
Tap and drag to
jump to any part of
the video or audio
Mute/Unmute
Full screen
Increase volume
Visit WindowsMedia.com
Decrease volume
Skip to the beginning of
Skip to the next file
the current file or to the
Play/Pause
previous file
About the screens and menus
Windows Media® Player Mobile has three primary screens:
•
Playback screen. The screen that displays the playback controls (such as Play,
Pause, Next, Previous, and Volume) and the video window. You can change
the appearance of this screen by choosing a different skin.
•
Now Playing screen. The screen that displays the Now Playing playlist. This
special playlist indicates the current file being played and any files that are
“queued up” to play next.
•
Library screen. The screen that lets you quickly find your audio files, video
files, and playlists. It contains categories such as My Music, My Videos, My TV,
and My Playlists.
Experiencing Multimedia 213
At the bottom of each screen, you can open a Menu. The commands on this menu
vary, depending on which screen you are viewing. For more information about the
commands in these menus, see Help on your device.
Synchronize video and audio files
Use the latest version of Windows Media® Player on your computer to synchronize
digital media files from your computer to your device. This ensures that protected
files and album art (for skins) are copied to your device correctly.
To synchronize content to your device automatically
1. On your computer, open Windows Media® Player, then connect your device to
your computer.
2. In the Device Setup Wizard, select Yes, search my computer now.
Note
If you have previously opened Windows Media® Player and searched for media
on your computer, you will not be prompted to search your computer in Step 2.
3. On the Device Setup dialog box, enter a name for your device and click
Finish.
Note
If you installed a storage card that has a capacity of more than 4GB and
your entire library can fit into the storage card, Windows Media Player will
automatically synchorize your music files. The device also needs to be set to Disk
Drive mode for Windows Media Player to automatically synchronize.
4. On the left panel of Windows Media® Player, right-click the name of your
device and click Set Up Sync.
Note
To set up media synchronization on a storage card, right-click Storage Card in the
left panel of Windows Media® Player, then click Set Up Sync.
5. Select the playlist(s) that you want to sync between your computer and
device, then click Add.
Note
On the Device Setup dialog box, make sure that the Sync this device
automatically check box is selected.
6. Click Finish.
214 Experiencing Multimedia
The files will begin synchronizing to your device. The next time you connect your
device to your computer while Windows Media® Player is running, synchronization
will start automatically.
To synchronize content manually to your device
1. If you have not set up media synchronization between your device and
computer, follow steps 1 to 3 in “To synchronize content to your device
automatically”.
2. Click the Sync tab on the Windows Media® Player of your computer. Select a
Playlist or a Library on the left panel of the Windows Media® Player.
3. From the Content List, drag the media files that you want to sync to your
device and drop them to the Sync List.
Playlists and Library List
Content List
Sync List
4. Click Start Sync to start synchronizing the selected files to your device.
Experiencing Multimedia 215
Notes
• Use Windows Media® Player 11 or higher on your computer to synchronize media
files to your device.
• Audio files copy faster if Windows Media® Player is configured to automatically set
the quality level for audio files copied to your device. For more information, see the
Windows Media® Player Help.
Play media
Use the Library to find and play songs, videos, and playlists that are stored on your
device or an installed storage card.
To update the Library
1. If you are not on the Library screen, tap Menu > Library.
2. On the Library screen, tap the Library arrow (near the top of the screen), then
tap the media storage that you want use, for example, Storage Card.
3. In most cases, Windows Media® Player Mobile automatically updates the
library. However, you can manually update the library to ensure that it
contains new files that you recently copied to your device or storage card.
Tap Menu > Update Library to manually update the library list.
To play video and audio files on your device
1. Select a category (for example, My Music or My Playlists).
2. Tap and hold the item that you want to play (such as a song, album, or artist
name), then tap Play.
Tips
• To play a media file that is stored on your device but is not in a library, on the
Library screen, tap Menu > Open File. Tap and hold the item that you want to play
(such as a file or a folder), then tap Play.
• To play a media file from the Internet or a network server, tap Menu > Library then
tap Menu > Open URL.
216 Experiencing Multimedia
Playlists
In Windows Media® Player Mobile, you can create a new playlist by saving the
current Now Playing playlist and giving it a new name.
To save a new playlist
1. If you are not on the Library screen, tap Menu > Library.
2. Tap to select a category (for example, My Music or My Playlists).
3. Select a media file that you want, then tap Menu > Queue Up. This adds the
file to the Now Playing list.
Repeat this step until you have added all desired media files to the Now
Playing list.
Note
You cannot select multiple files simultaneously.
4. After adding the media files, tap Menu > Now Playing.
5. On the Now Playing screen, tap Menu > Save Playlist.
6. Enter the playlist name, then tap Done.
7. To play back the playlist you created, tap My Playlists in the Library, select
your playlist, then tap Play.
Troubleshooting
If you encounter a problem while using the Windows Media® Player Mobile, see the
Troubleshooting Windows Media® Player Mobile page at the Microsoft web site :
http://www.microsoft.com/windows/windowsmedia/player/windowsmobile/
troubleshooting.aspx.
Experiencing Multimedia 217
11.4 Using Audio Manager
Audio Manager is a music browser and player in one. It gives you access to all the
music files on your device, and allows you to easily browse for the music that you
want to play by organizing music into categories such as title, artist, album, and
more. You can also create playlists of your favorite songs and use the integrated
Music Player to play them back.
To launch Audio Manager
Tap Start > Programs > Audio Manager.
Notes
• Audio Manager searches for all music files stored on your device memory and
memory card that have the following audio formats: MP3, WMA, AAC, and AAC+. It
will search in the following locations:
		 Device:
My Music (including all subfolders)
\My Documents (including all subfolders)
		 Memory card: \Storage Card (including all subfolders)
• Music files are categorized under Artists, Album, Genre, and more, if such
metadata is found in the files.
Library
When you launch the Audio Manager, the Library screen opens and displays
categories such as All Songs, Artists, Genre, and more. An arrow that appears to
the right of a category indicates that it has submenus.
When you tap a category on the Library’s Main screen, you will see more submenus
which may have deeper levels of menus. For example, when you tap Artists,
another level of submenus will be listed showing artist names. When you tap an
artist name, more submenus showing album names will be displayed. Just keep
opening the submenus until you reach the level where song titles can be selected
for playback.
218 Experiencing Multimedia
Library: Main screen
Library: Artists screen
Music files that are protected by Digital Rights Management (DRM) will be listed
under the Protected category. A lock icon shown before song titles indicates that
the music files are protected. Select a file then tap Info if you want to view file
information. A cross-marked lock icon shown before song titles indicates that the
rights for the music files have expired, and you will not be able to play them. Tap
Delete if you want to delete these files.
Note
Audio Manager keeps track of the last submenu that you accessed. When you exit
Audio Manager and open it again, it will display the last submenu that you were in.
Keep tapping the submenu name at the top of the screen until you reach the Library's
Main screen.
Experiencing Multimedia 219
Music Player
When you select a music file in the Library, Music Player opens and automatically
plays it. Use the available buttons to control the playback.
Repeat
Shuffle
Play/Pause
Playback time
Drag the slider to move
forward or backward in
a music track.
Go to previous
music track
Go to next
music track
Return to
Library screen
Open a menu where you can choose
to add the current song to a playlist,
set the song as ring tone, and more.
Playlists
The Playlists screen shows the current playlists that are found on the device
memory and memory card.
There are two types of playlists that will be shown on the Playlist screen:
•
Windows Media® Player playlists. These are playlists that are in Windows
Media® Player Mobile’s Library (which is synchronized with Windows Media®
Player on your computer), and they are indicated by the Windows Media®
Player icon (
). They can be played in Audio Manager’s Music Player but
cannot be edited.
220 Experiencing Multimedia
•
Custom playlists. These are playlists that are created in Audio Manager and
can be edited.
To create a playlist
1. On the Library’s Main screen, tap Playlists.
2. On the Playlists screen, tap Menu > New.
3. Enter a Playlist name then tap OK.
4. On the Playlists screen, tap the playlist you have just created then tap Menu >
Edit.
5. Tap Menu > Add.
6. Tap the check boxes to select the songs you want to add to the playlist, or tap
Menu > Select All to choose all the songs.
7. Tap OK three times to return to the Playlists screen.
To play back a playlist
1. On the Playlists screen, tap to select a playlist.
2. Tap the first song in the selected playlist. Music Player automatically opens
and starts playing the first song. After each song, the next one in the playlist
will be played.
Note
Playlists are not automatically updated when music files have been deleted from the
device memory or memory card.
Set music as ring tone
You can set your favorite music as a ring tone for your device.
1. Use the NAVIGATION CONTROL to select a song in the Library or tap a song to
play it in Music Player, then tap Menu > Set as Ring Tone.
2. If the selected music is an MP3 file, tap Trim if you want to trim it first to make
it shorter.
Experiencing Multimedia 221
Mark the part of the music that
will be used as the ring tone.
Drag the left handle to mark the
start time, then drag the right
handle to mark the end time.
Play/Stop
For more precise marking, you
can also tap these controls to
step backward/forward one
step and mark it.
Confirm
trimming the
ring tone.
Cancel
trimming.
3. Tap Set as Default Ring Tone.
Tip
If you only want to save the song to the ring tone folder for future use, tap Save
to Ring Tone Folder. Later on, you can tap Start > Settings > Personal tab >
Phone to set it as your ring tone.
4. A confirmation message is then displayed. Tap OK.
222 Experiencing Multimedia
11.5 Using Audio Booster
Audio Booster optimizes sound for a better listening experience. It provides preset
moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit
different types of music.
To access Audio Booster
Tap Start > Programs > Audio Booster.
This control
Does this
1 On
Select the check box to enable
or disable the equalizer.
2 Equalizer
presets
Tap to choose the Equalizer
preset to use.
3 Done
Tap to apply the modified
settings.
4 Menu
• Tap Menu > Cancel to exit
Audio Booster without
applying the modified
settings.
• Tap Menu > Save as Preset
or Delete Preset to save
or delete preset equalizer
settings.
5 Frequency
band
To use an Equalizer preset
Tap the list box then select a desired preset.
Drag the sliders to adjust the
frequency.
Experiencing Multimedia 223
To create a custom equalizer preset
1. Adjust the frequency bands to your desired values by dragging the equalizer
controls. The selected values are indicated on top of the sliders.
2. Save your equalizer settings as a preset by tapping Menu > Save as Preset.
3. Enter a preset name and then tap Done. The preset you created will be added
to the list box.
To delete a custom equalizer preset
1. Tap the list box then select the Equalizer preset you want to delete.
2. Tap Menu > Delete Preset.
Note
You can only delete custom equalizer presets. Equalizer presets that are pre-installed
cannot be deleted.
224 Experiencing Multimedia
Chapter 12
Programs
12.1 Accessing Programs on Your Device
12.2 Adding and Removing Programs
12.3 Adobe® Reader® LE
12.4 Calendar
12.5 Contacts
12.6 Comm Manager
12.7 Microsoft® Office Mobile
12.8 Notes
12.9 Java
12.10 SIM Manager
12.11 Spb GPRS Monitor (Available by Country)
12.12 Sprite Backup
12.13 Tasks
12.14 Voice Recorder
12.15 Voice Speed Dial
226  Programs
12.1 Accessing Programs on Your Device
You will find preinstalled programs in the Start menu and on the Programs screen
of your device.
To launch and use a program
Do one of the following:
•
Tap Start to open the Start menu and then tap a desired program.
•
To access more programs, tap Start > Programs, or slide to the Programs tab
on the Home screen and then tap All Programs.
12.2 Adding and Removing Programs
Additional programs, such as the programs in the Application disc or other
programs that you purchase, can be installed and uninstalled on your device. Your
device does not allow you to uninstall most of the preinstalled programs.
Note
Before you purchase additional programs for your device, make sure that they are
compatible with your device.
To install a program
1. Download the program to your computer (or insert the CD or disk that
contains the program into your computer).
You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions
of files for different device types and processors. Be sure to select only the
programs designed for your device.
2. Read any installation instructions or documentation that comes with the
program. Many programs provide special installation instructions.
3. Connect your device to the computer.
4. Double-click the installation setup file.
Programs 227
To uninstall a program
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the program you want to
remove, then tap Remove.
12.3 Adobe® Reader® LE
Adobe® Reader® LE is an application for viewing PDF (Portable Document Format)
documents on your device. It supports a subset of the features found in the PC
versions of Adobe Reader.
To open Adobe Reader LE
Tap Start > Programs > Adobe Reader LE.
To open a PDF file on your device
• Open a PDF file in Adobe Reader LE; or
•
Open File Explorer, find the PDF file, then tap the file to open it.
To navigate through a PDF document
You can use the controls in the program and finger gestures to navigate a PDF
document.
•
Tap Tools > View > Continuous and then slide your finger up or down the
screen to scroll through the pages in the document.
Tip
You can also drag the scroll bars to scroll through the pages.
•
Tap to zoom in or
to zoom out. After zooming in, slide your finger on
the screen to pan the current page.
•
Press NAVIGATION up/down/right/left to move to the desired direction of the
page.
•
Tap to return to the previous page; tap to move to the next page. Tap
to jump to the first page; tap to jump to the last page.
•
Tap Tools > Go To > Page Number to enter a page number that you want to
view.
228 Programs
To search for text in the document
1. Tap Tools > Find > Text or tap
in the toolbar.
2. Type in the text to be searched, then tap Find.
The matched text in the document will be highlighted.
3. To view the next occurrence of the text, tap Tools > Find > Next.
Tips
• Adobe Reader LE displays a bookmark pane for the PDF files that contain
bookmarks. Tap the bookmarks to go to a specific section/page within the file.
• Adobe Reader LE supports password-protected PDF files with up to 128-bit
encryption. When you open a password-protected PDF file, you will be prompted
to enter the password before opening it.
12.4 Calendar
Use Calendar to create appointments, including meetings and other events. You
can also synchronize Calendar appointments between your device and computer.
To open the Calendar screen
• On the TouchFLO Home screen, tap Calendar or a displayed appointment; or
•
Tap Start > Calendar.
Create appointments
To schedule an appointment
1. Open the Calendar screen and then tap Menu > New Appointment.
2. Enter a name for the appointment.
3. Do one of the following:
•
•
If it is a special occasion such as a birthday or a whole-day event, set the
All Day option to Yes.
If there is a time frame for the appointment, set the start and end dates
and times.
Programs 229
4. Specify the type of category for your appointment, so that it can be grouped
with other related appointments. Tap Categories, then select a preset
category (Business, Holiday, Personal, or Seasonal), or tap New to create your
own category.
5. When finished, tap OK to return to the calendar.
Notes
• All-day events do not occupy blocks of time in Calendar; instead, they appear in
banners at the top of the calendar.
• To remove an appointment, tap Menu > Delete Appointment.
Tip
To have the time entered automatically in Day view, tap and drag to select a time slot
for the new appointment, and tap Menu > New Appointment.
To set the reminder time for new appointments
By default, Calendar has been set to display a reminder alert when you have new
upcoming appointments. You can change the reminder time.
1. Open the Calendar screen.
2. Tap Menu > Tools > Options > Appointments tab.
3. Make sure the Set reminders for new items check box is selected.
4. Set the time when you want the reminder to alert you.
5. Tap OK to return to the Calendar screen.
230 Programs
View appointments
By default, Calendar displays appointments in Agenda view. You can also look at
your appointments in Day, Week, Month, and Year views.
The highlighted hours
here indicate the time of
your appointments.
The red box and
arrows indicate
that there are
conflicting
appointments.
Tap to view appointment
details.
Tap to switch views.
Agenda view
•
To see detailed appointment information in any view, tap the appointment.
•
To view appointments by category, tap Menu > Filter, then select the desired
category.
•
To change the default view that Calendar uses to display appointments, tap
Menu > Tools > Options > General tab. Tap the Start in box, then choose
the calendar view.
•
When in Month view, you will see the following indicators:
Morning appointment
Afternoon or evening appointment
Both morning and afternoon/evening appointments
All-day event
Programs 231
Send appointments
To send a meeting request
Use Calendar to schedule meetings via e-mail with contacts who use Outlook or
Outlook Mobile.
1. Open the Calendar screen.
2. Schedule a new appointment, or open an existing one and tap Menu > Edit.
3. Tap Attendees, then tap Add Required Attendee or Add Optional
Attendee and add the contacts whom you want to invite.
Note
You can specify if an attendee is required or optional only if your device is
connected to a Microsoft Exchange 2007 server. Otherwise, all attendees are
designated as required. For more information, see “Managing Meeting Requests”
in Chapter 7.
4. When you have finished adding attendees, tap Done.
5. Tap OK to send.
Tip
To choose the e-mail account to use for sending meeting requests, tap Menu > Tools
> Options > Appointments tab. Tap the Send meeting requests via box and choose
to send via your Outlook E-mail, POP3/IMAP4 or Windows Live™ account.
Notes
• If you’re sending the meeting request using your Outlook E-mail account, it will
be sent to the attendees the next time you synchronize your device with your
computer or Exchange Server.
• When attendees accept your meeting request, the meeting is automatically
added to their schedules. When their response is sent back to you, your calendar is
updated as well.
To send appointment details as a vCalendar
A vCalendar is a standard file format used for exchanging scheduling and task
information. vCalendar files can be exported to Outlook on the computer.
After selecting the appointment to send in the Calendar screen, tap Menu >
Send as vCalendar to send a vCalendar containing appointment details as a file
attachment in an MMS message. For more information, see “MMS” in Chapter 6.
232  Programs
12.5 Contacts
Contacts is your address book and information storage for people and businesses
you communicate with. You can add the following types of contacts to your device:
•
Outlook contacts. Contacts that are stored on your device, which can be
created on your device or synchronized with your PC or the Exchange Server.
•
SIM contacts. Contacts that are stored on the SIM card. Only a name and
phone number can be stored for each entry.
•
Windows Live™ contacts. Contacts that you communicate with using
Windows Live™ Messenger or MSN.
Note
You can only add Windows Live™ contacts after you have set up Windows Live™
on your device. See “Add Windows Live contacts” in Chapter 8 for details.
To open the Contacts screen
Do one of the following:
•
On the TouchFLO Home screen, slide to the People tab and then tap All
People; or
•
Tap Start > Contacts.
Add new contacts
To add a contact on your device
1. Open the Contacts screen.
2. Tap New, select Outlook Contact, and enter the contact information.
3. In the File as field, choose how you want the contact name to appear in the
contact list.
4. To add a photo of the contact, tap Select a picture, and then select the
picture file or tap Camera to take a photo of the contact.
Programs 233
5. To assign a ring tone to the contact, tap the Ring tone field, scroll through
the list of tones, then select a desired tone.
6. When finished, tap OK.
Tips
• If a person who is not in your list of contacts called you and you want to save that
person’s phone number, tap and hold the phone number in the Call History and
then tap Save to Contacts from the shortcut menu.
• To save a phone number that is contained in a message, open the message, tap the
underlined phone number, and then tap Menu > Save to Contacts.
• To edit contact information, tap the contact name and then tap Menu > Edit.
To add a contact to your SIM card
1. Open the Contacts screen.
2. Tap New, then select SIM Contact.
3. Enter a contact name and phone number.
4. Tap OK.
Tip
You can also use the SIM Manager to add and edit contacts on your SIM card. For
more information, see "SIM Manager" in this chapter.
Organize and search contacts
To group similar contacts
For easier management, you can group similar contacts by assigning them to
categories.
1. Create a new Outlook contact or edit an existing Outlook contact.
2. Tap Categories.
3. Select a preset category such as Business or Personal, or tap New to create
your own category.
4. When finished, tap OK.
234 Programs
To find a contact on your device
There are several ways to find a contact when your contact list is long:
•
Begin entering a contact name in the provided text box until the contact you
want is displayed.
•
On the Quick Scroll bar on the right of the Contacts screen, scroll to or tap a
letter to go directly to the part of the contacts list where contact names start
with that letter.
Quick Scroll
bar
Note
•
•
You can disable the Quick Scroll bar by tapping Menu > Options and selecting
the Show alphabetical index check box. This will show the alphabetical index at
the top of the Contacts list.
Filter the list by categories. In the contact list, tap Menu > Filter, then tap
a category you’ve assigned to a contact. To show all contacts again, select
Menu > Filter > All Contacts.
Programs 235
Share contact information
To beam a contact’s details
You can quickly send contact information to another mobile phone or device
through Bluetooth beaming.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > Beam, then select a device where to beam the
contact to.
Note
Before beaming, make sure Bluetooth is turned on and set to visible mode on your
device and the target mobile device. You can also beam contact information to your
computer. See Chapter 9 for details.
To send contact information via text messaging
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > SMS \ MMS.
3. Select the contact information you want to send, then tap Done.
4. In the new text message, enter the mobile phone number of the recipient,
then tap Send.
To send contact information as a vCard
A vCard (virtual business card) is a standard file format used for exchanging contact
information. vCard files can be exported to Outlook on the computer. From your
device, you can send a vCard containing contact information as file attachment in
an MMS message.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send as vCard.
3. A new MMS message is created with the vCard file attached. Enter the mobile
phone number or e-mail address of the recipient, then tap Send.
For more information, see “MMS” in Chapter 6.
236  Programs
12.6 Comm Manager
Comm Manager is a central location where you can easily turn on and off the
communication features of your device such as the phone, Wi-Fi, data connection,
Bluetooth, and more.
To access the Comm Manager
Do one of the following:
•
On the TouchFLO Home screen, slide to the Settings tab and then touch
Communications.
•
Touch Start > Programs > Comm Manager.
•
Touch Start > Settings > Connections tab > Comm Manager.
1 Switch Airplane Mode on or off. Turning on Airplane Mode turns off the phone, Wi-Fi and
Bluetooth functions. For more information, see "To enable or disable Airplane Mode" in
Chapter 2.
2 Switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone
settings. See “Changing Basic Settings” in Chapter 13 for details.
3 Switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your
device. See Chapter 9 for details.
Programs 237
4 Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network
connection settings. See “Wi-Fi” in Chapter 8 for details.
5 Switch between automatically receiving (as items arrive) or manually retrieving Outlook
e-mails. See Chapter 7 for details.
6 Turn your data connection (such as 3G or GPRS) on or off. See “Starting a Data
Connection” in Chapter 8 for details.
12.7 Microsoft® Office Mobile
Microsoft® Office Mobile consists of the following applications:
•
Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks
and templates on your device.
•
Microsoft® Office OneNote® Mobile lets you create notes with text,
photos, and voice recordings for synchronization later with Microsoft® Office
OneNote® 2007 on your computer.
•
Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide
show presentations in *.ppt and *.pps formats.
•
Microsoft® Office Word Mobile lets you create and edit documents and
templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.
To use Microsoft Office Mobile
1. Tap Start > Office Mobile.
2. Tap the Office Mobile application that you want to use.
Word Mobile and Excel Mobile do not fully support some features of Microsoft®
Office Word and Microsoft® Office Excel®. To see a complete list of features that are
not supported in Word Mobile and Excel Mobile, see Help on your device.
238 Programs
Tips
• By default, Word Mobile saves documents in .docx format, while Excel Mobile
saves workbooks in .xlsx format. If you want to open these types of files on
a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you
need to download and install the File Format Converter in your computer.
You can find this converter at http://www.microsoft.com/downloads/details.
aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
• If you want Word Mobile to save documents in .doc format, tap Menu > Tools >
Options (or Menu > Options when no document is opened), then change the
Default template to Word 97-2003 Document (.doc).
• If you want Excel Mobile to save workbooks in a format that is compatible with
Microsoft Office 2000, Office XP, or Office 2003, tap Menu > Options (with no
workbook opened), then change the Template for new workbook to Blank 972003 Workbook.
12.8 Notes
Using Notes, you can create handwritten and typed notes, record voice notes,
convert handwritten notes to text for easy readability, and more.
To create a note
1. Tap Start > Programs > Notes. In the note list, tap New.
2. Choose an input method and then enter your text.
Tip
For more information about input methods and entering text, see Chapter 4.
3. When finished, tap OK to save and return to the note list.
Notes
• To select handwritten text, tap and hold next to the writing. As soon as dots
appear, and before they form a complete circle, quickly drag across the writing.
• If a letter crosses three ruled lines, it is treated as a drawing rather than text.
To draw in a note
1. Create or open a note file.
2. Use the stylus to draw on the screen. A selection box then appears around
your drawing.
Programs 239
3. Tap OK to save.
Note
To select a drawing (for example, to copy or delete it), tap and hold the drawing
briefly. When you lift the stylus, the drawing is selected.
To record a voice note
You can create a stand-alone recording (voice note) or you can add a recording to
a note.
1. Tap Start > Programs > Notes.
2. If you do not see the Recording toolbar, tap Menu > View Recording
Toolbar.
3. Do one of the following:
• To add a recording to a note, create or open a note.
•
To create a stand-alone recording, record from the note list.
4. Tap the Record icon (
) to begin recording your voice. Tap the Stop icon (
) when you are finished recording.
Tip
To select the voice recording format, return to the note list and then tap Menu >
Options > Global Input Options link (at the bottom of the Options screen). On the
Input screen, tap the Options tab and choose the desired format from the Voice
recording format list.
240 Programs
12.9 Java
MIDlets are Java applications such as games and tools that can run on mobile
devices, while a MIDlet suite is a collection of one or more MIDlets. The Java
program lets you download, install and manage MIDlets or MIDlet suites on your
device. Your device supports Java 2 Micro Edition, J2ME.
To open the Java program
Tap Start > Programs > Java.
Install and launch MIDlets/MIDlet suites
There are several ways to install a MIDlet/MIDlet suite.
To download and install via Internet Explorer Mobile
1. Tap Menu > Install > Browser to open Internet Explorer Mobile.
2. Locate the MIDlet/MIDlet suite while connected to the Internet.
3. Select the MIDlet/MIDlet suite to download.
4. Information about the MIDlet/MIDlet suite is then displayed. Tap Continue.
5. Confirm to start downloading.
6. Select  or a folder where to install the MIDlet suite to, then tap OK.
To install from your device
You can copy MIDlets/MIDlet suites from the computer to your device using the
USB sync cable or Bluetooth connection. Copy them to the root folder or any
subfolder on your device.
1. Tap Menu > Install > Local Files. The program then searches for MIDlets/
MIDlet suites on your device and displays them in a list.
2. From the list, tap the MIDlet/MIDlet suite that you want to install.
3. Confirm to start the installation.
4. Select  or a folder where to install the MIDlet suite to, then tap OK.
Programs 241
To run a MIDlet/MIDlet suite
Do one of the following:
•
After installation of the MIDlet/MIDlet suite is complete, tap Yes.
•
On the Java screen, open the folder that contains the MIDlet/MIDlet suite.
Select the MIDlet/MIDlet suite, then tap Launch.
Manage MIDlets/MIDlet suites
You can organize MIDlets/MIDlet suites into folders for easy identification,
renaming, updating, and more. If the device memory is full, uninstall some MIDlets/
MIDlet suites to free up memory space.
To create folders
1. On the Java screen, tap Menu > New Folder.
2. Enter a folder name, then tap Create.
To update a MIDlet/MIDlet suite
Tap and hold a MIDlet/MIDlet suite, then tap Update. Alternatively, you can tap
Menu > Actions > Update.
Java will search for updates for the selected MIDlet/MIDlet suite where it was
installed from before.
To uninstall MIDlets
Before you uninstall a MIDlet, make sure that it is not running.
1. Tap and hold the MIDlet, then tap Uninstall.
2. Tap OK to confirm.
Note
To uninstall all MIDlets and folders from the current folder, tap Menu > Uninstall All.
242  Programs
12.10 SIM Manager
SIM Manager allows you to view the contents of your SIM card, transfer contacts
from your SIM card to your device or vice versa, and make a call to a SIM contact.
To create a contact on your SIM card
1. Tap Start > Programs > SIM Manager.
2. Tap New and enter a contact name and phone number.
3. Tap Save to save the information on your SIM card.
Tip
To change contact information on your SIM card, tap a SIM contact, edit the
information, and then tap Save.
To copy SIM contacts to your device
If you have saved contacts on your SIM card, you can copy them into Contacts on
your device.
1. On the SIM Manager screen, select the desired contact, or select all SIM
contacts by tapping Menu > Select All.
2. Tap Menu > Save to Contacts.
To copy contacts to the SIM card
Only one phone number per contact name can be stored on a SIM card. When you
copy a contact that has several phone numbers to your SIM card, SIM Manager
saves each number under a separate name.
To save each number under a different contact name on the SIM card, SIM Manager
appends an indicator at the end of each name.
By default, /M, /W and /H are appended to indicate mobile, work and home phone
numbers respectively. You can edit this indicator first before you start copying
contacts to your SIM card. Indicators of the other types of phone numbers are left
empty for you to define them.
Programs 243
1. On the SIM Manager screen, tap Menu > Tools > Options.
2. Select the check boxes of the types of phone numbers that you want to be
added to the SIM card.
3. Under the Mark column, you can change the
indicator that will be appended to the SIM
contact names for each phone number type. To
do so, select a phone type, tap Edit, enter your
desired indicator, then tap Save.
4. After modifying, tap OK.
5. Tap Menu > Contacts to SIM.
6. Select the check boxes of the contact’s phone
numbers that you want to copy to your SIM card,
then tap Save.
To store your SIM card’s phone number
1. On the SIM Manager screen,
tap Menu > Tools > List of
Own Numbers.
2. Tap Voice Line 1.
3. Change the name, if desired,
then enter your mobile
phone number.
4. Tap Save.
When your phone
number is stored
on the SIM card,
it will appear on
the SIM Manager
screen.
244 Programs
12.11 Spb GPRS Monitor (Available by Country)
Using Spb GPRS Monitor, you can monitor how much data you have sent and
received on your device, and check the network usage costs by taking into account
your service plan details. You can also view connection cost and traffic charts,
generate reports of network connection usage, and export reports to CSV files for
use with Microsoft® Office Excel® and Access.
Install GPRS Monitor
The GPRS Monitor program is included in the Application disc. To install it onto
your device, run the program’s installer on your computer. Follow the on-screen
instructions on your computer and your device to complete the installation.
The GPRS Monitor icon and pop-up window
You can enable the GPRS Monitor icon to be shown on the title bar. This icon shows
the data connection or dial-up connection speed, data traffic, and battery status.
To show the GPRS Monitor icon on the title bar
1. Tap Start > Programs > Spb GPRS Monitor.
2. Tap Tools > Options > Icon tab.
3. Select the Show taskbar icon check box.
By default, the GPRS Monitor icon shows three bars that represent the following
status information:
Icon Bar 2: Traffic
(Full bar corresponds to
100%. Each bar is 20%.)
Icon Bar 1: Speed
(Full bar corresponds
to 19KB/sec.)
Icon Bar 3: Battery
(Each bar corresponds to
20% of the total charge.)
Programs 245
When you tap the GPRS Monitor icon on the title bar,
a pop-up window opens and shows you detailed
statistics about your data transfers, such as the
data size you have just transferred and its cost, the
allowable amount of data that you can transfer, and
more.
Set up monitoring and notification
To select the connection to be monitored
1. On the GPRS Monitor screen, tap Tools > Options > Connection tab.
2. Select the Enable connection monitoring check box.
3. In the Connection list, select the connection you want to monitor.
To enter your service plan details
Service plan details, or tariffs, determine the price that you pay for your data
transfers. The tariff may either be flat rate or time-based, depending on whether
you’re using GPRS or a phone dial-up connection for data transfers.
Contact your wireless service provider to find out about your tariff, and enter the
information in the Tariff tab or the Tariff Details tab on the Options screen.
Note
The calculation of network usage costs is based on the information that you entered,
and is only an estimate. The actual amount billed by your service provider may differ.
246  Programs
To set up traffic limit notifications
You can set up traffic limit notifications if you want to be notified when a traffic limit
is reached.
1. On the GPRS Monitor screen, tap Tools > Options.
2. Enable the notifications on the Day Warn and Month Warn tabs. You can
specify up to three daily and three monthly limits.
Once traffic reaches one of these limits, you will receive a notification.
View charts and reports
On the GPRS Monitor, you can view network connection cost charts and traffic
charts, as well as generate detailed reports of network connection usage during
a given period of time. These reports can be exported to CSV files that you can
open using Excel, Access, or other similar spreadsheet and database software
applications.
To view charts and generate reports
On the GPRS Monitor screen:
•
Tap the Chart tab to view the network connection cost charts and traffic
charts.
•
Tap the Report tab to generate reports on network traffic and tariff.
For more information about using Spb GPRS Monitor, see Help on your device.
Programs 247
12.12 Sprite Backup
Use Sprite Backup to back up data, which includes settings, files, contacts, and all
other information, to the device memory, storage card or a computer.
Note
If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you use Sprite Backup to back up your
files including settings, contacts and other information to your computer or a storage
card.
To install Sprite Backup
1. Make sure your device is connected to your computer via a USB cable.
2. Insert the Application disc on your computer’s disc drive and start the Sprite
Backup installation.
3. Follow the on-screen instructions to install the Sprite Backup PC Manager to
your computer and the Sprite Backup program onto your device.
To open Sprite Backup
On your device, tap Start > Programs > Sprite Backup.
Before you start to back up or restore files, please check the following:
•
Make sure that the device storage memory has at least 15MB of free space.
To check, tap Start > Settings > System tab > Memory > Main tab.
•
If you have a storage card installed, make sure that it has at least 100MB of
free space. To check, tap Start > Settings > System tab > Memory > Storage
Card tab.
To back up data
1. To back up data remotely to a computer, enable the PC backup feature first.
See “To enable remote backup to a computer” for instructions.
2. On the Sprite Backup main screen, tap Backup.
3. On the Backup Data Selection screen, you will see a tree view of the data and
files on your device. Tap “+” on the left of an item to view its sub-items.
248 Programs
Use the check boxes to select or exclude items for backup.
Main screen
Notes
Backup Data Selection screen
 It is recommended that you do not back up the File System of your device as
this may cause restoration problems. To not back up the File System, expand
the System Data folder by tapping “+” on its left side and then clearing the File
System checkbox.

When File System is not backed up, you will need to reinstall all third party
software to your device after you do a hard reset and restored your files.
4. After selecting data items, tap Next. The Save As screen then appears.
5. Enter a file name for the backup file.
6. In Location, choose whether to save the backup file to \Storage Card (if one
is installed), \My Documents on the device memory, or to a PC.
Tip
When backing up to a storage card or to \My Documents on the device memory,
you can also choose a specific folder where to save the backup file.
7. Tap Next.
8. On the Device Reset Required screen, tap Next to start the backup.
Note
Do not start and use any programs on your device until the backup process is
completed.
Programs 249
To restore data
1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches
for all available backup files from the device memory and storage card and
then displays them on the Open File screen.
Tip
To search for backup files created on your computer, connect your device to
your computer and run Sprite Backup PC Manager on your computer. In Sprite
Backup’s Open File screen on your device, set Location to PC.
2. Select the backup file you want to restore and then tap Next.
3. In the tree view, select the items you want to be restored to your device and
then tap Next.
Note
If your phone has SIM PIN lock enabled, a screen will appear asking you to set up
Sprite Backup SIM Unlock feature. It is recommended that you set up this feature
to avoid file restoration errors. To set up, tap Setup Phone SIM Lock.
4. On the Device Reset Required screen, tap Next to begin restoring data.
Note
Sprite Backup soft resets your device first before it begins the backup or restoration
process. It soft resets again after the operation is completed.
To enable remote backup to a computer
1. On the Sprite Backup main screen, tap Options > Networking > PC.
2. Select the Enable PC Backup check box and choose whether to do the
remote backup to your computer via ActiveSync or network.
For more information about using Sprite Backup, see the Sprite Backup Help or
download the Sprite Backup User Manual from http://www.spritesoftware.com/.
250 Programs
12.13 Tasks
Use Tasks to keep track of things you need to do. A task can occur once or
repeatedly (recurring).
Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder
will be displayed when you have new tasks to be completed.
To create a task
1. Tap Start > Programs > Tasks.
2. Tap Menu > New Task, enter a subject for the task, and fill in information
such as start and due dates, priority, and so on.
3. Specify the type of category for your task, so that it can be grouped with
other related tasks. Tap Categories, then select a preset category (Business,
Holiday, Personal, or Seasonal), or tap New to create your own category.
4. When finished, tap OK.
To change the priority of a task
Before you can sort tasks by priority, you need to specify a priority level for each
task.
1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and tap a priority level in the Priority box.
4. Tap OK to return to the task list.
Note
All new tasks are assigned a Normal priority by default.
To show start and due dates in the task list
1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Show start and due dates check box, then tap OK.
Programs 251
To send task information as a vCalendar
After selecting the task to send in the Task screen, tap Menu > Send as vCalendar
to send a vCalendar containing task details as a file attachment in an MMS message.
For more information, see “MMS” in Chapter 6.
12.14 Voice Recorder
Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail
attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Note
Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband)
format only. This is a common speech audio format used in mobile devices.
To record your voice
1. Tap Start > Programs > Voice Recorder.
2. Hold the device’s microphone close to your mouth.
3. Touch Record or
recording.
to start recording. Tap Stop or
to end the
To select or create a folder where to save voice recordings
By default, all recordings are saved in the My Voices folder of the device. You can
choose another folder or create a new folder to save your voice recordings.
Note
If a storage card is installed before you open Voice Recorder, the recordings are saved
in the My Voices folder on the storage card by default.
1. Tap the arrow beside the folder name on the top-left of the screen.
2. In the menu that opens, choose an existing folder or touch Add/Delete to
create a new folder.
To play back a voice recording
On the Voice Recorder screen, touch a voice recording, or navigate to a voice
recording and then tap Play (
).
252  Programs
Tip
If you need to adjust the sound volume, touch any of the status icons on the title bar
and then touch the Volume icon (
) to open the System Volume screen where you
can adjust the volume.
To send a voice recording through MMS
Select a voice recording, then tap Menu > Send via MMS. A new MMS message is
then created with the voice recording automatically inserted as an audio clip.
See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
To send a voice recording via e-mail
Select a voice recording, tap Menu > Send, and then select an e-mail account.
This creates a new e-mail message with the voice recording inserted as a file
attachment.
See “Using E-mail” in Chapter 6 to learn how to send e-mails.
To beam a voice recording via Bluetooth
1. Select the voice recording you want to beam, then tap Menu > Beam File.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All.
2. Tap the device you want to send the voice recording to.
3. On the other device, accept the file transfer to receive the file.
To set a voice recording as ring tone
Select the voice recording, then tap Menu > Set as Ringtone.
To rename or move a recording
1. Select the voice recording, then tap Menu > Rename/Move.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All. Note that you can move multiple files, but you cannot
rename multiple files simultaneously.
2. In Name, enter the new voice recording name.
3. To move the voice recording, select the new destination Folder and
Location. Tap OK.
Programs 253
12.15 Voice Speed Dial
You can record voice tags so that you can dial a phone number or launch programs
simply by speaking a word.
To create a voice tag for a phone number
1. On the TouchFLO Home screen, slide to the People tab and then touch All
People to open the Contacts screen.
Tip
You can also touch Start > Contacts to open the Contacts screen.
2. Do one of the following:
•
Scroll to the desired contact, then touch Menu > Add Voice Tag.
•
Touch the desired contact to open the contact card and then touch Menu
> Add Voice Tag.
•
Use the stylus to tap and hold the desired contact, then tap Add Voice
Tag.
3. Select the phone number that you want to create a voice tag for, then touch
Record (
).
Select the
desired
phone
number.
Touch the
Record
icon to start
recording.
254 Programs
Tip
To ensure voice recognition accuracy, record your voice in a quiet place.
4. When completed, a Voice Tag icon
is displayed on the right of the item.
To create a voice tag for a program
Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab.
The Application tab displays a list of all installed programs on your device. The
procedure for creating a voice tag for a program is the same as the procedure for
creating a voice tag for a phone number.
To make a call or launch programs using a voice tag
1. Touch Start > Programs > Voice Speed Dial.
2. After the beep, say the recorded voice tag that you have assigned to the
phone number you want to call or the program you want to launch. The
system will repeat the voice tag, then dial out or launch the program
automatically.
Note
If the system cannot recognize your voice tag, move to a quiet place, then try again
while speaking clearly.
To view and test the voice tags you have created
1. Touch Start > Settings > Personal tab > Voice Speed Dial.
2. The Voice Tag tab displays a list that contains all the voice tags you have
created. Select an item in the list, then do one of the following.
•
Touch the Record button (
•
Touch the Play button (
•
Touch the Delete button (
) to rebuild the voice tag.
) to play the voice tag.
) to delete the voice tag.
Programs 255
12.16 ZIP
The ZIP program increases the storage capacity of your device by allowing you to
compress files in the conventional ZIP format. It also allows you to extract files from
a zip file.
To start ZIP on your device
Tap Start > Programs > ZIP.
Each time you start ZIP, it searches for files that have the .zip file extension, and
displays these files on the Archive List screen.
To open a ZIP file and extract files
1. Touch a zip file to open it, or navigate to a zip file and then touch File > Open
Archive.
Note
You cannot select multiple ZIP files.
2. From the zip file, select files by doing one of the following:
•
•
•
Touch a file to select it.
To select several files, touch Menu > Action and make sure Multi-Select
Mode is selected. Select files by touching each file. (Touch a selected file
to deselect it).
To select all files, touch Menu > Action > Select All.
3. Touch Menu > Action > Extract.
4. Choose a folder where the files will be extracted to, then touch Extract.
5. Touch Menu > File > Close Archive to close the zip file.
To create a new zip archive
1. Touch File > New Archive.
2. On the Save As screen, enter the zip file name and choose a folder where
you want to save it. You can also choose whether to save the zip file on the
device’s main memory or a storage card.
256  Programs
3. Touch Save.
4. Touch Menu > Action > Add.
5. Navigate to the folder that contains the files you want to archive.
6. Select files to add by doing one of the following:
• Touch a file to select it.
• To select several consecutive files, drag over the files.
• To select several non-contiguous files, use the stylus to tap and hold on
the screen and then select Multi-Select Mode. Select files by tapping
each file. (Tap a selected file to deselect it).
• To select all files, use the stylus to tap and hold on the screen and then tap
Select All.
7. Touch Add.
8. Touch Menu > File > Close Archive to save and close the zip file.
Chapter 13
Managing Your Device
13.1 Copying and Managing Files
13.2 Settings on your Device
13.3 Changing Basic Settings
13.4 Using Connection Setup
13.5 Using Task Manager
13.6 Protecting Your Device
13.7 Managing Memory
13.8 Resetting Your Device
13.9 Windows Update
13.10 Battery Saving Tips
258 Managing Your Device
13.1 Copying and Managing Files
You can copy files between your device and computer, or copy files to a storage
card installed on your device. You can also efficiently manage your files and folders
using File Explorer.
To copy files using Windows Mobile Device Center or ActiveSync
1. Connect your device to the computer.
2. Click File Management > Browse the contents of your device in Windows
Mobile Device Center on your computer, or click Explore in ActiveSync on
your computer. This opens Windows Explorer on your computer and displays
the contents of your device.
3. To copy a file from your device to your computer:
a. Browse the contents of your device, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your computer, then click Paste.
4. To copy a file from your computer to your device:
a. Browse the folders on your computer, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your device, then click Paste.
To manage files on your device using File Explorer
File Explorer lets you browse and manage the contents of your device. The root
folder on the device is named My Device, and contains the following folders: My
Documents, Program Files, Windows, and more.
1. Tap Start > Programs > File Explorer.
2. Tap a folder or file to open it.
3. To return to an upper level folder, tap Up and select the folder.
4. To quickly delete, rename, or copy a file, tap and hold the file, then choose
Managing Your Device 259
the desired operation on the shortcut menu. To copy or delete multiple files,
tap and drag over the desired files to select, tap and hold the selection, then
choose the desired operation on the shortcut menu.
To copy files to a storage card
1. Make sure that the storage card is properly installed on your device.
2. Tap Start > Programs > File Explorer and navigate to the appropriate folder.
3. Tap and hold the file you want to copy, then tap Copy.
4. Tap the down arrow (
), then tap Storage Card in the list.
5. Tap and hold an empty area on the screen and then select Paste on the
menu.
Tip
You can configure programs such as Word Mobile and Excel Mobile to directly save
edited files onto a storage card. In the program's file list, tap Menu > Options, then
select the Storage Card in the Save to box.
13.2 Settings on your Device
You can adjust the device settings to suit the way you work. To see all available
settings, slide to the Settings tab on the Home screen and tap All Settings.
Personal tab
Icon
Description
Buttons Assign a program or function to a hardware button. You can also set the
behavior when you press and hold the END key.
Input Set options for each of the input methods.
Lock Set a password for your device.
260 Managing Your Device
Icon
Description
Menus Set which programs will appear in the Start menu.
Owner Information Enter your personal information on your device.
Phone Customize phone settings such as ring tone, set a PIN number for your
SIM card, and more.
Sounds & Notifications Enable sounds for events, notifications, and more, and
set the type of notification for different events.
Today Customize the appearance and the information to be displayed on the
Today screen.
Note
You will not see the Today screen when the TouchFLO Home screen
is enabled. To display the Today screen, you can disable TouchFLO by
tapping Start > Settings > Personal tab > Today > Items tab and then
clearing the TouchFLO check box. However, you will not be able to use
the TouchFLO Home screen if you disable it.
Voice Speed Dial Create voice tags for voice dialing contacts and SIM contacts as
well as for launching programs.
System tab
Icon
Description
About This is where you can see basic information such as the Windows Mobile®
version and type of processor used on your device. You can also specify a name
for your device.
Certificates See information about certificates that are installed on your device.
Managing Your Device 261
Icon
Description
Clear Storage Reset your device to factory default settings.
Clock & Alarms Set the device clock to the date and time of your locale or to a
visiting time zone when you’re traveling. Alarms can also be set at specified days
and times of a week.
Customer Feedback Set your device to automatically send information about
how you use Windows Mobile. By default, this option is disabled.
Device Information See information about the firmware version, hardware,
identity, and the duration of calls made on your device.
Encryption Encrypt files on your storage card. Encrypted files will only be
readable on your device.
Error Reporting Enable or disable the device's error reporting function. When
this function is enabled and a program error occurs, technical data about the state
of the program and your computer will be logged in a text file and delivered to
Microsoft's technical support if you choose to send it.
External GPS Set the appropriate GPS communication ports, if required. You may
need to do this when there are programs on your device that access GPS data or
you have connected a GPS receiver to your device. See Help for details.
Key Lock Lock the buttons on your device except for the POWER button when
the device is in Sleep mode. This ensures you will not switch the device on by
accident and consume unnecessary power.
Managed Programs Displays the programs that were installed on your device
using System Center Mobile Device Manager.
Memory Check the device memory allocation status and storage card
information.
262 Managing Your Device
Icon
Description
Microphone AGC Adjust the volume of your voice automatically when you are
recording.
Power Check the remaining battery power. You can also set the brightness of
the backlight and timeout for turning off the display (switching device to Sleep
mode) to conserve battery power.
Regional Settings Set the regional configuration to use, including the format for
displaying numbers, currency, date, and time on your device.
Remove Programs Remove programs that you installed on your device.
Screen Recalibrate the screen, apply ClearType, and change the screen text size.
Task Manager Stop running programs and set the (
) button to end programs
immediately when you tap the button. For more information, see "Using Task
Manager" in this chapter.
TouchFLO You can enable or mute the finger scrolling and panning sound. You
can also enable or disable the large Start menu, and choose to show or hide the
System Status screen when title bar icons are tapped.
Windows Update Link to Microsoft's web site and update Windows Mobile® on
your device with the latest security patches or fixes, if they are available.
Managing Your Device 263
Connections tab
Icon
Description
Advanced Network Turn on/off HSDPA, set the line type to use when making
circuit switch data (CSD) connection, and set the GPRS authentication method.
HSDPA is a 3.5G digital data service that provides high-speed downstream data
rates. In order for your device to attain the high connection speed of HSDPA, your
wireless service provider must support this feature and you must be within the
coverage area of your service provider’s HSDPA network. Your device supports up
to 7.2 Mbps download speeds.
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other
Bluetooth devices.
Comm Manager Manage your device’s connections (including GPRS, Wi-Fi,
and Bluetooth), turn the phone on or off, and enable or disable the Direct Push
function.
Connection Setup Configure your device’s data connections, such as 3G/GPRS,
WAP, and MMS, based on the detected or selected network operator. See “Using
Connection Setup” in this chapter for details.
Connections Set up one or more types of modem connections for your device,
such as phone dial-up, 3G/GPRS, and more, so that your device can connect to the
Internet or a private local network.
Domain Enroll Enroll your device in your company’s domain to let System
Center Mobile Device Manager to manage the device. Please ask your Server
Administrator for more details.
USB to PC Set the type of USB connection to your computer. Select the
ActiveSync option for synchronizing data, or use Disk Drive mode to quickly
transfer files to the storage card on your device. See “When Connecting Your
Device to a Computer” in Chapter 1 for details.
264 Managing Your Device
Icon
Description
Wi-Fi Scan for available wireless networks.
Wireless LAN See information about the active wireless network, and customize
Wi-Fi settings.
13.3 Changing Basic Settings
Date and time
To set the date and time
1. On the Home screen Home tab, tap the time display and then tap the Time
tab.
Tip
Tap the More tab and select the Display the clock on the title bar in all
programs option to show the clock on all screens.
2. Select the correct time zone and change the date or time.
Note
During synchronization, the time on your device is updated with the time on your
computer.
To set the date and time for a different location
If you visit or communicate with someone in a particular time zone often, you can
select it as your visiting time zone.
1. On the Home screen Home tab, tap the time display and then tap the Time
tab.
2. Tap Visiting.
3. Select the correct time zone and change the date or time.
Managing Your Device 265
Regional settings
The style in which numbers, currency, dates, and times are displayed is specified in
regional settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Regional Settings > Region tab and then select your
region from the list.
Note
This does not change the language of your device’s operating system.
The region you select determines which options will be available on the other
tabs.
3. To customize regional settings further, tap the appropriate tabs and set the
desired options.
Display settings
To adjust the screen brightness
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Backlight tab.
3. Clear the Auto adjust backlight check box to display the sliders for adjusting
brightness.
4. Adjust the brightness by dragging the slider under On battery power and
On external power.
To set the backlight to dim after a time delay
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Advanced tab.
3. In On battery power and On external power, select the Turn off backlight
if device is not used for check box, then specify the time delay.
266 Managing Your Device
To increase or decrease the size of text on the screen
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Screen > Text Size tab.
3. Move the slider to increase or decrease the text size.
Device name
The device name is used to identify your device in the following situations:
•
Synchronizing with a computer
•
Connecting to a network
•
Restoring information from a backup
Note
If you synchronize multiple devices with the same computer, each device must have a
unique name.
To change the device name
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap About > Device ID tab.
3. Enter the device name.
Notes
• The device name must begin with a letter, consist of letters from A to Z, numbers
from 0 to 9, and cannot contain spaces. Use the underscore character to separate
words.
• If you enroll your device to your company’s domain, the device name will be
changed to be the same as the one used to enroll the device.
Ringer settings
To change the ring type and ring tone
1. Press the TALK/SEND button to open the Phone screen and then tap Menu >
Options.
2. On the Phone tab, select the desired Ring type and Ring tone from the
provided lists and then tap OK.
Managing Your Device 267
Tips
• You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you
downloaded from the Internet or copied from your computer as ring tones. To
quickly set the music file as a ring tone, tap and hold the music file and then select
Set As Ringtone. For a complete list of supported audio file formats for ring tones,
see "Specifications" in the Appendix.
• To use your sound files as ring tones, copy them first to the /My Documents/My
Ringtones folder on your device, then select the sound from the Ring tone list of
your device. For more information about copying files, see “Copying and Managing
Files” in this chapter.
Alarms and notifications
To set an alarm
1. On the Home screen Home tab, tap the time display and then tap the Alarms
tab.
2. Tap  and enter a name for the alarm.
3. Tap the day of the week for the alarm. Select multiple days by tapping each
desired day. Tap again to deselect the day.
4. Tap the time to open a clock and set the time for the alarm.
Tip
You can drag the hour and minute hands of the clock to set the time.
5. Tap the alarm icon (
) to specify the type of alarm you want. You can
choose a flashing light, a single sound, a repeating sound, or vibration.
6. If you choose to play a sound, tap the list next to the Play sound check box
and tap the sound you want.
To choose how to be notified about events or actions
1. On the Home screen, slide to the Settings tab and then tap Sounds >
Advanced.
2. On the Sounds tab, choose how you want to be notified by selecting the
appropriate check boxes.
268 Managing Your Device
3. On the Notifications tab, in Event, tap an event name and choose how you
want to be notified by selecting the appropriate check boxes. You can choose
from several options, such as a special sound, a message, a flashing light, or
vibrate.
Tip
Turning off sounds and flashing light notifications helps conserve battery power.
Phone services
Your device can directly link to the mobile phone network, and enable you to
access and change the settings of various phone services for your device. Phone
services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact
your wireless service provider to find out about the availability of phone services for
your device.
To access and change settings of phone services
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > Services tab.
3. Select the service you want to use, then tap Get Settings.
4. Choose your desired options, then tap OK.
For more information about customizing settings of phone services, see Help on
your device.
Managing Your Device 269
13.4 Using Connection Setup
Connection Setup configures your device’s data connections, such as GPRS, WAP,
and MMS, for you so that you do not need to enter the settings manually onto your
device. All you need to do is to select your network operator, then Connection
Setup does all the configuration for you.
To automatically configure the device’s data connections
The first time you power on your device, or when you insert a new SIM card and
then power on your device, Connection Setup will display a notification message to
inform you that it will automatically configure your device’s connection settings.
1. Tap Yes on the notification message.
Note
If your SIM card supports multiple network operator profiles, the next message
that appears will display network profile choices. Select the profile you want to
use and tap OK.
2. When prompted to automatically configure your device to the proper
network settings, tap Yes.
Connection Setup configures your device’s data connection settings.
3. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator to use for data connections
You can also manually select your network operator from Connection Setup’s
settings screen. Connection Setup will then reconfigure your device’s data
connections settings based on the operator that you selected.
270 Managing Your Device
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connection Setup.
3. Select the network Country and Operator you want to use, then tap OK.
Note
If you choose a Country and/or Operator that is different from the installed SIM
card network operator, you may not be able to access network services.
4. When prompted to confirm whether you want to configure the data
connection settings based on the selected network, tap Yes.
Connection Setup configures the data connection settings.
5. After the Connection Setup completes the configuration, tap Restart.
13.5 Using Task Manager
Task Manager lets you view and stop running programs, configure the
and enable the Quick Menu on the Home screen.
button,
To open Task Manager
• Tap the Quick Menu button on the top right corner of the Home screen to
open the Quick Menu, then tap ; or
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Task Manager.
To switch back to a running program
• Tap the program name in the Quick Menu; or
•
On the Task Manager screen, tap and hold the program name on the
Running tab, then tap Activate.
To configure the Exit (
) button
You can configure the Exit button to shut down running programs when the
button is tapped, or to just temporarily close the program screen but keep the
program running.
Managing Your Device 271
1. On the Task Manager screen, tap the Button tab.
2. Select the Enable the “X” button to end running programs check box.
Note
When the Enable the “X” button to end running programs check box is not
selected, tapping the Exit button will only close a program screen. The program
is not ended and continues to run in the background.
3. Choose the action for shutting down programs (by tapping the
by tapping and holding the
button).
button, or
4. Tap OK.
To close running programs from the Task Manager
1. On the Task Manager screen, tap the Running tab.
2. Do one of the following:
Tip
•
Select the check box of the programs that you want to close, then tap
Stop Selected.
•
Tap Stop All to close all programs in the list.
•
Tap Menu > Stop All but Selected to close all programs except those
which check boxes are selected.
You can also close running programs from the Quick Menu on the Home screen. See
“Quick Menu” in Chapter 1 for details.
To add a running program to the exclusive list
If you add a running program to the Exclusive Programs List, it will not be closed
when you tap Stop Selected or Stop All and will not be listed in the Quick Menu
on the Home Screen.
1. On the Task Manager screen, tap the Running tab.
2. Tap and hold the program name, then tap Add Exclusive.
Tip
To remove a program from the exclusive list, tap the Exclusive tab, select the check
box of the program, then tap Remove.
272 Managing Your Device
To set the sorting preference and program icon size in the Quick Menu
1. On the Task Manager screen, tap the Others tab.
2. In Sort programs in Quick Menu by, choose whether to sort according to
Program name or Memory usage. The list will be sorted in ascending order.
3. In Program icon size in Quick Menu, choose whether to use Small size or
Large size.
13.6 Protecting Your Device
Protect your SIM card with a PIN
You can protect your SIM card from unauthorized use by assigning a PIN (personal
identification number). The default SIM card PIN is provided by your wireless service
provider.
To enable the SIM card PIN
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > PIN/PIN2 tab.
3. Select the Require PIN when phone is used check box.
4. Enter the PIN number and then tap OK. To change the PIN at any time, tap
Change PIN.
Tip
Emergency calls can be placed at any time, without requiring a PIN.
Protect your device with a password
You can help keep your data more secure by requiring a password every time the
device is turned on.
To set a device password
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Lock.
Managing Your Device 273
3. Select the Prompt if device unused for check box, then specify the idle time
before the device requires a password.
4. In the Password type box, select the type of password you would like to use.
Tip
If your device is configured to connect to a network, use an alphanumeric
password for increased security.
5. Enter the password in both the Password and Confirm boxes.
6. Tap OK. The next time the device is turned on, you will be prompted to enter
your password.
Notes
• To ensure that you can always make emergency calls, do not begin your password
with the digits of your local emergency number.
• If you entered a hint, the hint will be displayed after the wrong password is entered
five times.
• Each time a wrong password is entered, the device response time gets longer until
the device appears to be not responding.
• If you forget your password, you can hard reset or clear the device memory. Before
you do this, make sure you back up your data and files so that you can restore
them back to your device. For more information about hard resetting the device
and clearing the memory, see “Resetting Your Device” in this chapter.
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage card.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Encryption.
3. Select Encrypt files when placed on a storage card.
Notes
• Encrypted files can only be read on the device that encrypted them.
• Encrypted files are opened just like other files, provided you are using the device
that encrypted them. There is no separate step for you to take to read these files.
274 Managing Your Device
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
13.7 Managing Memory
To see how much memory is available for use
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Main tab. The amount of memory
allocated to data storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see the available space of the storage card
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Storage Card tab.
If your device is running low on memory, try the following to free memory on your
device:
•
Close programs which are not in use.
•
Install a storage card and then move files and e-mail attachments to the
storage card.
•
Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold
the file, and tap Delete.
•
Delete large files. To find large files on your device, tap Start > Programs >
Search. In the Type list, tap Larger than 64 KB, and tap Search.
•
In Opera Mobile or Internet Explorer Mobile, delete temporary Internet files
and clear history information.
Managing Your Device 275
•
Remove programs you no longer use.
•
Reset your device.
13.8 Resetting Your Device
Soft reset
Occasionally, you may need to reset your device. A soft (or normal) reset of your
device clears all active program memory and shuts down all active programs. This
can be useful when your device is running slower than normal, or a program is not
performing properly. A soft reset is also necessary after the installation of some
programs. If a soft reset is performed when programs are running, unsaved work
will be lost.
To perform a soft reset
1. Remove the back cover.
(See “To remove the back cover”
in Chapter 1 for instructions.)
RESET
2. Pull out the stylus, and use the
stylus tip to press the RESET
button located near the battery
compartment.
Your device then restarts and displays
the Home screen.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should
only be performed if a normal reset does not solve a system problem. After a
hard reset, the device is restored to its default settings—the way it was when you
first purchased it and turned it on. Any programs you installed, data you entered,
276 Managing Your Device
and settings you customized on your device will be lost. Only Windows Mobile®
software and other pre-installed programs will remain.
Warning!
Your device will be set back to factory default settings. Make sure that any
additional installed programs and/or user data have been backed up before you
perform a hard reset.
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
To perform a hard reset
1. Remove the back cover and then pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER
buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press Volume Up to restore
manufacturer default, or
press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP
button to perform the hard reset, or press any other button to cancel the
reset.
Managing Your Device 277
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
13.9 Windows Update
You can update Windows Mobile® on your device with the latest updates, security
patches or fixes, if these are available.
To set up Windows Update
The first time you run Windows Update, you need to set up how you want Windows
Update to check for patches on the Microsoft web site.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. On the Update Setup screen, tap Next.
4. Choose how you want to check for updates, Manual or Automatic, then tap
Next.
Note
If you select Automatic, you will be asked if you want to use your current data
plan to check for updates. Select or clear the Use my data plan to check for and
download updates check box and tap Next.
5. Tap Finish.
To check for updates
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. Tap Check Now.
278 Managing Your Device
Note
Windows Mobile® updates may not be available at all times. Check the Windows
Mobile® web site for update information.
To change Windows Update options
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. Tap Menu and select the option you want to
change.
•
Tap Connections to change how the
device connects to the Internet when
checking for updates.
•
Tap Change Schedule to change how
Windows Update checks for Windows
Mobile® updates.
Managing Your Device 279
13.10 Battery Saving Tips
How long your battery power lasts depends on the battery type and how you use
your device. Try the following to help conserve battery life:
•
When the device is not in use, press POWER to switch off the display.
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Advanced tab of the Power settings screen.
Here, you can specify the time before your device automatically turns off the
display and backlight to conserve battery power. For optimum conservation,
specify 3 minutes or less.
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Backlight tab. Clear the Auto adjust backlight
check box to be able to adjust the backlight brightness settings.
•
Use the AC adapter to plug your device into an external power outlet
whenever possible, especially when using a storage card or when using a
modem or other peripherals.
•
Turn Bluetooth off when you are not using it. Make your device visible to
other devices only when you are trying to establish a Bluetooth partnership.
For more information about Bluetooth, see Chapter 9.
•
On the Home screen, slide to the Settings tab and then tap
Communications. On the Comm Manager screen, turn off Wi-Fi or your
active data connection when not in use.
•
Tap Start > Settings > Connections tab > Wi-Fi and then tap Menu >
Advanced. From the Turn off Wi-Fi if not connected in list, select a timeout
period so that Wi-Fi can be automatically turned off when your device is not
connected to any wireless network for some time.
280 Managing Your Device
•
Lower the volume.
•
Close battery-intensive programs, such as the Camera, when you are done
using them. Make sure the programs are ended and are not continuously
running in the background. Refer to “Using Task Manager” in this chapter for
information on closing programs.
Appendix
A.1 Specifications
A.2 Regulatory Notices
282 Appendix
A.1 Specifications
System Information
Processor
Qualcomm® MSM7225™ 528 MHz
Memory
• ROM : 256 MB
• RAM : 192 MB DDR
Note: Figures are the total ROM and RAM memory available for use and
storage. Since the memory is shared by the operating system, applications,
and data, the actual available memory is less than what is specified.
Operating System
Windows Mobile® 6.1 Professional
Power
Battery
Rechargeable Lithium-ion or Lithium-ion polymer battery,
1100 mAh
Battery Life
(estimates)
Standby time:
WCDMA: Up to 450 hours
GSM: Up to 365 hours
Talk time:
WCDMA: Up to 360 minutes
GSM: Up to 400 minutes
Media playback Up to 9.1 hours (WMV)
time:
Up to 20 hours (WMA)
(The above are subject to network and phone usage.)
AC Adapter
Voltage range/frequency: 100 - 240V AC, 50/60 Hz
DC output: 5V and 1A
Communications
Network
HSPA/WCDMA:
• 900/2100 MHz
• Up to 384 Kbps up-link and 7.2 Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
• 850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
Internal Antenna
Yes
Appendix 283
Physical
Dimensions
102 mm (L) X 53.5 mm (W) X 14.5 mm (T)
Weight
96 g (with battery)
Display
LCD Type
2.8-inch TFT-LCD flat touch-sensitive screen
Resolution
320 x 240 QVGA resolution
Camera Module
Type
3.2 megapixel CMOS color camera with fixed focus
Resolution
• Photo: 3M (2048 x 1536)
	2M (1600 x 1200)
1M (1280 x 960)
VGA (640 x 480)
QVGA (320 x 240)
• Video: CIF (352 x 288)
QVGA (320 x 240)
QCIF (176 x 144)
Sub-QCIF (128 x 96)
Digital Zoom
Up to 4X
Connections
I/O Port
HTC ExtUSB™
• 11-pin mini-USB and audio jack in one
• USB 2.0 high speed
Wireless
Connections
• Bluetooth® 2.0 with EDR
• Wi-Fi® (IEEE 802.11 b/g)
284 Appendix
Audio
Microphone/
Speaker
Built-in
Ring tone
• Supports eAAC+, AAC+, AAC, AMR-NB, AMR-WB, QCP, MIDI, MP3,
MPEG4-Audio, WMA, WAV formats
• 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI
Supported
Playback Formats
• Windows Media® Player: MP3, MPEG-4, AAC, AAC+, eAAC+,
WMA, WAV, AMR, AMR‑NB, AMR-WB, AWB, SP-MIDI
Controls
Device Control
•
•
•
•
•
TouchFLO™
Phone buttons: TALK/SEND and END
POWER button
VOLUME CONTROL button
RESET button
Expansion Slot
Card Slot
microSD™ (SD 2.0 compatible)
Others
Special Features
• GPS and A-GPS ready
• (GPS navigation software not included)
Appendix 285
A.2 Regulatory Notices
Regulatory Agency Identifications
For regulatory identification purposes, your product is assigned a model number of
JADE100.
To ensure continued reliable and safe operation of your device, use only the
accessories listed below with your JADE100.
The Battery Pack has been assigned a model number of JADE160.
Note
This product is intended for use with a certified Class 2 Limited Power Source, rated 5
Volts DC, maximum 1 Amp power supply unit.
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harm-ful interference to radio or TV reception, which can be determined by turning
the equipment on and off, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
286 Appendix
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made
to the device that are not expressly approved by High Tech Computer Corporation
may void the user’s authority to operate the equipment.
Body-worn operation
This device was tested for typical body-worn operations with the back of the
phone kept 1.5cm from the body. To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar accessories that maintain a
1.5cm separation distance between the user’s body and the back of the phone,
including the antenna. The use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF exposure requirements,
and should be avoided.
Safety Precautions for RF Exposure
Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
FCC RF Radiation Exposure Statement
•
This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth / QDID:B014495 and WLAN / CID:WFA6450.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
•
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
Appendix 287
Exposure to Radio Frequency (RF) Signals
Your device contains a radio transmitter and receiver. The radiated output power
is far below the international radio frequency exposure limits. These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set
by international standards bodies:
•
•
•
•
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report
86. 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The standard incorporates a
substantial margin of safety to give additional protection for the public and to
account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Your device has an internal antenna. Use only the supplied integral antenna. Use of
unauthorized or modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the recommended limits as
well as result in non-compliance with local regulatory requirements in your country.
To assure optimal phone performance and ensure human exposure to RF energy
is within the guidelines set forth in the relevant standards; always use your
device only in its normal-use position. Do not touch or hold the antenna area
unnecessarily when placing or receiving a phone call. Contact with the antenna
288 Appendix
area may impair call quality and cause your device to operate at a higher power
level than needed. Avoiding contact with the antenna area when the phone is IN
USE optimizes the antenna performance and the battery life.
Tests for SAR are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operation can be well
below the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (for example, at the ear and worn on the body) as required
by the FCC for each model. (Bodyworn measurements may differ among phone
models, depending upon available accessories and FCC requirements). For body
worn operation, to maintain compliance with FCC RF exposure guidelines, use
only original manufacturer approved accessories. When carrying the phone while
it is on, use the specific original manufacturer supplied or approved carrying case,
holster, or other body-worn accessory
SAR Information
1.33 W/kg @ 1g
Telecommunications & Internet Association (TIA)
Safety Information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
Appendix 289
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
•
•
Should ALWAYS keep the phone more than six inches from their pacemaker
when the phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference. If you have any reason to suspect that interference is taking
place, turn the phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 13th February 2003, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and
in addition, to promote the reuse, recycling and other forms of recovery of such
wastes so as to reduce disposal.
290 Appendix
The WEEE logo (shown at the left) on the product or on its box indicates
that this product must not be disposed of or dumped with your other
household waste. You are liable to dispose of all your electronic or
electrical waste equipment by relocating over to the specified collection
point for recycling of such hazardous waste. Isolated collection and
proper recovery of your electronic and electrical waste equipment at
the time of disposal will allow us to help conserving natural resources.
Moreover, proper recycling of the electronic and electrical waste
equipment will ensure safety of human health and environment. For
more information about electronic and electrical waste equipment
disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you
purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and its
amendments.
Index
A2DP 178
ActiveSync
- ActiveSync mode 47
- set up 100
- synchronize with computer 101
- synchronize with Exchange Server 130
Add and remove programs 226
Adobe Reader LE 227
Airplane Mode 60, 236
Alarm 267
Album
- about 205
- close Album 210
- play back video 210
- select a photo or video to view 206
- view an image 206
Answering calls 54
Attachment
- add to e-mail 123
- download 125
- set IMAP4 to automatically receive
attachments 127
- set Outlook to automatically receive
attachments 127
Audio Booster 222
Audio Manager 217
Back cover
- remove 28
Backlight
- adjust brightness 265
- set backlight timeout 265
Back up data 247
Basic settings 264
Battery
- battery information 30
- charge battery 33
- install 31
- remove 31
- save battery power 145, 279
Beam via Bluetooth 179
Block Recognizer 91
Bluetooth
- about 176
- Bluetooth Explorer 181
- Bluetooth file sharing 181
- Bluetooth shared folder 181
- hands-free headset 178
- modem 166
- modes 176
- partnership (pairing) 177
- printing 182
- SIM Access Profile (SAP) 61
- stereo headset 178
292  Index
- synchronize 103
- turn on and off 236
- visible 176
Calendar
- create appointment 228
- send appointment 231
- view appointment 230
Call History 59
Calling
- from Contacts 53
- from Home screen 53
- from Phone screen 51
Camera
- about 194
- Advanced Options 202
- capture modes 194
- capture photos and videos 196
- file formats 195
- icons 196
- Menu Panel 198
- resolution 198
- specifications 283
- zooming 199
Capture photos and videos 196
Car kit phones 61
Clear Storage 277
Clock & Alarms 261, 264, 267
Comm Manager 236, 263
Compact QWERTY 86
Company Directory 138
Conference call 57
Configure data connection settings 35, 146,
269
Connect device to Internet
- Dial-up 147
- GPRS/3G 146
- start a connection 148
- ways of connecting 142
- Wi-Fi 142
Connection Setup 35, 41, 269
Contacts 232
Contacts Picture capture mode 195
Copy
- contacts to SIM card 242
- copy and manage files 258
- media files from PC to device 213
- SIM contacts to device 242
Data connection 146, 148, 237
Device name 266
Dial-up 147
Dimensions and weight 283
Direct Push 132, 237
Disk Drive mode 47
Download
- download complete e-mail 124
- e-mail download settings 120, 126
- file attachments 125
- Java applications 240
- satellite data 190
- synchronize e-mails 126
- web feeds 168
Draw 238
Index 293
E-mail
- Internet e-mail account (POP3/
IMAP4) 118
- mail server settings 119
- Mail tab (Home screen) 70
- send 123
- settings (POP3/IMAP4) 120
- setup wizard 118
- synchronize 96, 126, 130
- types of e-mail accounts 116
EDGE 146
Emergency call 53
Emoticon
- MMS 114
- Windows Live Messenger 163
Ending calls 54
Equalizer 222
Excel Mobile 237
Exchange Server 130
Favorite contacts 67
File Explorer 258
Find contact
- Company Directory 138
- on device 234
Finger gestures 81
Finger panning 82
Finger scrolling 81
Forward e-mail 125
Full QWERTY 85
Google Maps 77, 186
GPRS 146
GPRS Monitor 244
GPS 188, 190
Hard reset 275, 276
Home screen 39, 64
Home tab (Home screen) 66
IMAP4 118
Input methods
- Block Recognizer 91
- Compact QWERTY 86
- Full QWERTY 85
- Letter Recognizer 92
- Phone Keypad 87
- Transcriber 92
Input Panel 84
Input Selector arrow 84
International call 54
Internet 142
Internet e-mail 118
Internet Sharing 165
Internet tab (Home screen) 71
Java
- create folders 241
- install MIDlets/MIDlet suites from
device 240
294 Index
- install MIDlets/MIDlet suites from
Internet 240
- manage MIDlets/MIDlet suites 241
- uninstall MIDlets 241
- update a MIDlet/MIDlet suite 241
Key Lock 261
Letter Recognizer 92
Library
- Audio Manager 217
- Music tab (Home screen) 74
- Windows Media Player Mobile 212
Live Messenger 162
Mail tab (Home screen) 70
Making calls 51
Maps Search tab (Home screen) 77
Meeting request 136, 231
Memory 45, 274, 282
Messages tab (Home screen) 69
Messaging
- about 106
- e-mail 116, 118, 122
- multimedia (MMS) 111
- text (SMS) 107
Messenger 162
microSD card
- install 32
Microsoft Office Mobile 237
MIDlet/MIDlet suite 240
MMS
- about 111
- add audio clip 114
- add photo/video 113
- add text 114
- blacklist 116
- create MMS message 112
- MMS settings 111
- reply message 115
- view message 115
MMS Video capture mode 195
Modem
- Bluetooth 166
- USB 165
Multimedia 111, 193
Multitap 88
Music tab (Home screen) 73
News channels (web feeds) 168
Notes 238
Numeric and Symbol Mode 90
Office Mobile 237
OneNote Mobile 237
Open PDF file 227
Opera Mobile 149
Panorama capture mode 195
Password 272
Index 295
People tab (Home screen) 67
Phone 50
Phone Keypad 87
Phone services 268
Photo capture mode 195
Photos and Videos tab (Home screen) 71
Picture Theme capture mode 195
PIN 50, 272
Playlists
- Audio Manager 219
- Windows Media Player Mobile 216
Play media 215
Play music
- Audio Manager 217
- Music tab (Home screen) 73
- Windows Media Player Mobile 215
Podcasts 173
POP3  118
PowerPoint Mobile 237
Profile 78
Programs 226
Programs tab (Home screen) 80
Put call on hold 56
QuickGPS 190
Quick menu 45, 270
Record
- voice note 239
- voice recording 251
Regional Settings 262, 265
Regulatory notices 285
Reply
- e-mail 125
- MMS 115
- text (SMS) 69, 109
Reset
- clear storage 277
- hard reset 275
- soft reset 275
Resolution 198
Review screen (Camera) 201
Ring tone 220, 266
Ring type 266
RSS Hub
- about 168
- headline list 171
- news channels 168
- podcasts 173
- summary view 172
Safety information 5
Screen text size 266
Send
- e-mail 123
- MMS message 112
- text message (SMS) 107
Set music as ring tone 220
Settings (Connections tab)
- Advanced Network 263
- Beam 263
- Bluetooth 263
- Connections 146, 147, 263
296  Index
- Connection Setup 263, 269
- Domain Enroll 263
- USB to PC 103, 263
- Wi-Fi 145, 264
- Wireless LAN 144, 264
Settings (Personal tab)
- Buttons 259
- Input 259
- Lock 259, 272
- Menus 260
- Owner Information 260
- Phone 260, 266, 268
- Sounds & Notifications 260, 267
- Today 260
- Voice Speed Dial 254, 260
Settings (System tab)
- About 260, 266
- Certificates 260
- Clear Storage 261, 277
- Clock & Alarms 261, 264, 267
- Customer Feedback 261
- Device Information 261
- Encryption 261, 273
- Error Reporting 261
- External GPS 261
- Managed Programs 261
- Memory 261
- Microphone AGC 262
- Power 262
- Regional Settings 262, 265
- Remove Programs 227, 262
- Screen 262, 266
- Task Manager 262, 270
- TouchFLO 44, 82, 262
- Windows Update 262, 277
Settings tab (Connections)
- Comm Manager 263
Settings tab (Home screen) 78
Settings tab (System)
- Key Lock 261
SIM Access Profile (SAP) 61
SIM card
- install 28
- PIN 272
- remove 29
SIM Manager
- about 242
- copy contacts to SIM card 242
- copy SIM contacts to device 242
- create SIM contact 242
Sleep mode 36
Smart Dial 51
SMS 69, 107, 123
Soft reset 275
Sounds & Notifications 260, 267
Sound settings 78
Spb GPRS Monitor 244
Speakerphone 57
Specifications 282
Speed Dial 59
Sprite Backup 247
Start menu 44
Status icons 40
Storage card
- encrypt 273
- install 32
Strap holder 34
Streaming Media 158
Index 297
Swap/switch calls 56
Synchronize
- ActiveSync 101
- change information types 102
- music and videos 104
- via Bluetooth 103
- Windows Media Player 213
- Windows Mobile Device Center 97
- with computer 78, 101
- with Exchange Server 78, 130
T9 88
Task Manager 262, 270
Tasks 250
Text messages
- copy from SIM card 110
- copy to SIM card 109
- create new message 107
- Messages tab (Home screen) 69
- send 108
Text size (screen) 266
TouchFLO 63, 262
Transcriber 92
Troubleshoot
- sync connection 103
- Windows Media Player Mobile 216
Turn device on and off 35
Turn phone function on and off 60, 236
USB modem 165
USB to PC 103, 263
Vibrate 43, 46, 53, 267
Video capture mode 195
Voice call 51
Voicemail 54
Voice Recorder 251
Voice Speed Dial
- about 253, 260
- create
- voice tag for phone number 253
- voice tag for program 254
- make call or launch program 254
Voice tag
- create
- for phone number 253
- for program 254
- make call or launch program 254
Weather tab (Home screen) 75
Wi-Fi 142, 237
Windows Live 160
Windows Live Messenger 162
Windows Media Player Mobile
- file formats 211
- menus 212
- playlists 216
- troubleshoot 216
Windows Mobile Device Center 97
Windows Update 262, 277
Word Mobile 237
298 Index
YouTube 153
ZIP
- about 255
- create archive 255
- open zip file and extract files 255
Zooming
- Camera 199
- finger gestures 82
- Opera Mobile 151

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2008:09:16 15:19:44+08:00
Create Date                     : 2008:09:16 15:19:34+08:00
Creator                         : Adobe InDesign CS2 (4.0)
Producer                        : Adobe PDF Library 7.0
Page Count                      : 143
Mod Date                        : 2008:09:16 15:19:44+08:00
Creation Date                   : 2008:09:16 15:19:34+08:00
Metadata Date                   : 2008:09:16 15:19:44+08:00

EXIF Metadata provided by EXIF.tools

Download:
Mirror Download [FCC.gov]
Document ID	1004123
Application ID	IH94z6e05aUfn9bWWrQ5TQ==
Document Description	User Manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	188.02kB (2350226 bits)
Date Submitted	2008-09-21 00:00:00
Date Available	2008-09-30 00:00:00
Creation Date	2008-09-16 15:19:34
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-09-16 15:19:44
Document Title	User Manual2
Document Creator	Adobe InDesign CS2 (4.0)

156 Internet
When you tap Stop (
) or finish watching the entire video, you are presented
with options on what you can do next.
Tap to go to the
next page of
related videos.
If no action
is taken, it
automatically goes
to the next page
after 10 seconds.
Tap to view details
about the video
you just watched.
Tap to go back to
the previous page
of related videos.
Tap to send the link
to the video you just
watched to another
person using one
of the Messaging
accounts.
Tap to add the
video to your
Bookmarks.
Tap to play back
the video again.
Bookmarks
You can store frequently viewed videos into Bookmarks for quick access.
To view Bookmarks
On the YouTube screen, tap
watch it.
. Tap a video to
To add a video into Bookmarks
Do one of the following:
•
After watching a video, tap
•
On the list of videos, tap
on the video
you want to add to Bookmarks and then tap
Internet 157
To delete a video from Bookmarks
1. On the Bookmarks screen, tap Edit.
2. Tap
on the video you want to remove from Bookmarks.
3. On the confirmation screen, tap Yes.
4. Tap Done.
History
View recently watched videos on the History screen.
To view History
On the YouTube screen, tap
Note
. Tap a video to watch it.
To clear the History list, tap Clear.
158 Internet
8.5 Using Streaming Media
Streaming Media lets you stream live broadcasts or on-demand media content
from the web. The media is sent in a continuous stream to your device and is played
as it arrives, along with the audio.
The Streaming Media program allows you to play 3GP and MPEG-4 files. It also
supports playback of SDP (Session Description Protocol) files.
To access streaming content via Opera Mobile
In Opera Mobile, you can open a web page containing RTSP (Real Time Streaming
Protocol) links to streaming media content then play the content in the Streaming
Media program.
1. On the Home screen, slide to the Internet tab and tap Browser.
2. In the address bar, enter the URL address of the web page that contains the
RTSP link to the desired *.3gp, *.mp4, or *.sdp file.
3. On the web page, tap the RTSP link.
4. Streaming Media then automatically opens and starts playing the file. During
playback, use the button controls to play/pause, switch to full screen, rewind,
and fast forward.
Rewind
Drag to go backward
or forward on the
video.
Tap to toggle
between playing or
pausing the video
playback.
Tap to switch to full
screen mode. In full
screen mode, tap the
screen to switch back.
Fast forward
Internet 159
To stream media files directly on the Streaming Media Player
Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files
directly on the program.
Note
Before you launch the Streaming Media program, make sure that you are connected
to the Internet.
1. Tap Start > Programs > Streaming Media.
2. From the program, tap Connect.
3. Enter the URL for the web site (rtsp://) and the file name.
4. Tap Connect.
5. Streaming Media then starts playing the file. During playback, use the button
controls to play/pause, switch to full screen, rewind, and fast forward.
To view streaming video information
Tap Menu > Properties to view the properties and general information of a
streaming video clip, such as video codec, audio codec, dimension, frames, and
duration of the video.
To configure streaming video connection settings
Tap Menu > Options to configure streaming settings:
•
Playback tab. Specify the memory space (in terms of duration) to allot for
storing video and audio data while streaming media.
•
Networks tab. Choose the connection to use and specify a range of port
numbers to use for streaming.
•
Video tab. Select the Use Landscape mode when watching in full screen
check box to automatically switch to landscape mode when watching in full
screen.
160 Internet
8.6 Using Windows Live™
Windows Live™ gives you a full Internet experience on your device. Windows Live™
helps you to find information, pursue your interests, and get in touch with friends
and family on the Internet easier.
Windows Live™ offers the following key features:
•
Live Search Bar, which lets you search for information on the web.
•
Live Messenger, the next generation of MSN Messenger Mobile.
•
Live Mail, the next generation of Hotmail.
•
Live Contacts, your address book for storing Live Mail, Live Messenger and
Hotmail contacts.
Set up Windows Live™
The first time you use Windows Live™, sign in using your Windows Live™ ID, which is
your Windows Live™ Mail or Hotmail address, and password.
To set up Windows Live™ for the first time
1. Tap Start > Programs > Windows Live and then tap Sign in to Windows
Live.
2. Tap the links to read the Windows Live™ Term of Use and the Microsoft
Privacy Statement. After reviewing them, tap Accept.
3. Enter your Windows Live™ Mail or Hotmail address and password, select the
Save password checkbox, then tap Next.
4. Tap Next.
5. Choose what information you want to sync online with your device.
Internet 161
If you select Store Windows Live contacts
in your mobile phone’s contact list, your
Windows Live™ contacts will be added to the
contact list and to Windows Live™ Messenger
on your device.
If you select Sync e-mail, your Windows
Live™ Mail or Hotmail inbox messages will be
downloaded to your device.
6. Tap Next.
7. After synchronization is complete, tap Done.
The Windows Live™ interface
On the Windows Live™ main screen, you will see a search bar, navigation buttons,
and an area where you can show and customize your profile.
1 Search bar
2 Navigation buttons. Tap the left
or right arrow to switch between
Windows Live™ Messenger, Windows
Live™ Mail, and Sync status.
3 Tap to change the display name,
picture, or personal message.
4 Tap Menu to access and change
settings.
162 Internet
Windows Live™ Messenger
With this mobile version of Windows Live™ Messenger, you enjoy many of the
same cool features that you get from the desktop version, which include the
following:
•
•
•
•
•
•
•
•
Note
Instant messaging via text and voice
Multiple conversations
Insert emoticons
Contact list with presence
Send and receive files including photos
Change status/display name
View contacts by online status, groups, and
more
Send messages even when a contact is
offline
Before you can use Windows Live™ Messenger, your device must be connected to
the Internet. For information about setting up an Internet connection, see “Ways of
Connecting to the Internet” in this chapter.
Launch Messenger and sign in
To open Windows Live™ Messenger
Do one of the following:
•
Tap Start > Programs > Messenger.
•
On the Windows Live™ main screen, tap the left or right arrow until you see
Messenger, then tap it.
Internet 163
To sign in and out
1. Tap Sign in on the Messenger screen.
2. If this is your first time to sign in, a message appears to inform you that your
messenger contacts will be added to the contact list on your device. Tap OK
to add them.
Signing in may take several minutes, depending on your connection speed.
3. To sign out, tap Menu > Sign Out.
To start and end conversations
1. In the contact list, select a contact, then tap Send IM to open a message
screen.
2. Enter your text message in the text entry area of the message screen.
3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the
list.
4. Tap Send.
5. To end a conversation with the current contact, tap Menu > End
conversation.
Tips
• To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any
file.
• To invite one or more contacts to the conversation, tap Menu > Options > Add
participant.
• To send a voice message, tap Voice Clip on a message screen then start talking.
After you have recorded a message, tap Send.
164 Internet
Add Windows Live™ contacts
You can add new Windows Live™ contacts in Windows Live™ Messenger or in
Contacts.
To add a Windows Live™ contact in Live Messenger
1. Tap Menu > Add new contact.
2. Enter the e-mail address of the contact, then tap OK.
To add a Windows Live™ contact in Contacts
1. On the Home screen, slide to the People tab and then tap All People.
2. Tap New, then tap Windows Live.
3. In the IM box, enter the e-mail address of the contact, which can be a
Windows Live ID or any other e-mail address.
Tip
You can fill in other information about the contact, if desired. This is not
necessary if you will communicate with the contact only through Windows Live™
Messenger or Live Mail.
4. Tap OK.
5. Follow the remaining instructions to add the new contact to your Windows
Live™ contact list.
Internet 165
8.7 Using Your Device as a Modem (Internet Sharing)
Internet Sharing connects your desktop or notebook computer to the Internet by
using your device’s data connection (GPRS or EDGE, for instance). You can choose to
connect via USB or Bluetooth.
Notes
• Make sure your device has a SIM card installed, and your device has a GPRS/3G or
phone dial-up modem connection. If your device has not been set up with a data
connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
For more information about setting up these connections, see "GPRS/3G" and
"Dial-up" in this chapter.
• If you want to use a USB cable connection, you must first install Windows Mobile
Device Center or Microsoft ActiveSync version 4.5 or later on the computer.
• If you want to use a Bluetooth connection, make sure your computer has built-in
Bluetooth capability. If your computer does not have Bluetooth, you can connect
and use a Bluetooth adapter or dongle.
• Before using Internet Sharing, disconnect from Windows Mobile Device Center or
ActiveSync on your computer.
To set up your device as a USB modem
1. On your device, tap Start > Programs >
Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the
name of the connection that your device uses to
connect to the Internet.
4. Connect your device to the computer using the
USB cable.
5. Tap Connect.
166 Internet
To use your device as a Bluetooth modem
For the computer to use the Internet connection of your device, activate Internet
Sharing on your device, then set up a Bluetooth Personal Area Network (PAN)
between the computer and your device.
1. On your device, turn on Bluetooth and set it to visible mode by following
the steps in “To turn Bluetooth on and make your device visible” section in
Chapter 9.
2. Initiate a Bluetooth partnership from your device by following the steps in “To
create a Bluetooth partnership”
3. Tap Start > Programs > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that
your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your
device:
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and
Sharing Center.
b. Click Manage network connections and then under Personal Area
Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection
icon.
Internet 167
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
Note
If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle to connect your computer and device via Bluetooth. Refer to the
Bluetooth adapter/dongle documentation for more information.
8. On the Internet Sharing screen on your device, check if a connected
status message is displayed, which indicates that your computer has been
successfully connected to the Internet using your device as a Bluetooth
modem.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
168 Internet
8.8 Using RSS Hub
RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the
Internet. It monitors Internet news channels and downloads the most current news
updates and podcasts so you are instantly informed of breaking news and events.
For more information and tips on using RSS Hub, see Help on your device.
Note
Make sure you have an active Internet connection (such as EDGE or GPRS) before
using RSS Hub.
Subscribe to and organize news channels
You must subscribe to news channels before you can receive RSS feeds.
To subscribe to news channels
1. Tap Start > Programs > RSS Hub, then tap Continue.
2. In the New Channel Wizard screen, select the Choose from a list of known
Channels option, then tap Next. A list of RSS channels is displayed.
Category
Channels
Tap to load pre-selected RSS channels.
Internet 169
Note
If the RSS channel you want to subscribe to is not in the list of known channels,
tap Back, then select another option on the New Channel Wizard screen. For
more information on these other options, see the Help on your device.
3. Select the check boxes of the RSS channels you want to subscribe to, then tap
Finish.
Tip
Channels are grouped by categories. If you want to select all channels in a
category, select the category check box.
4. The channel list appears. Tap Refresh to update the channels.
Tap to select the
channel category
to display
Channel list
Channel is updated.
Tap it to view the
headlines.
Tap to update
the channels
Headline count
Tap to cancel
channel updating
170 Internet
To add new channels
1. In the channel list, tap Menu > Channel > New to open the New Channel
Wizard screen.
2. Select an option, then follow screen instructions to add new channels. For
more information on New Channel Wizard options, see Help on your device.
To filter the channels in the display
In the channel list, tap Menu > View, then select:
•
Updated to display only those channels with unread headlines.
•
All to display all subscribed channels.
Manage channel categories
To view all the channels in a particular category, tap All Categories in the upper left
area of the channel list, then tap the category you want to display.
To add a new category, tap Menu > Categories in the channel list to display all
categories, then tap Menu > New.
To rename or delete a category, tap Menu > Categories in the channel list to
display all categories, select a category, then tap Menu > Rename or Menu >
Delete.
If you want to change the channel category, tap and hold the channel in the
channel list, then tap Change Category. Select a new category and tap OK.
Internet 171
View and organize headlines
Tap a channel in the channel list to display the headlines for that channel.
Headline or news
summary contains
a keyword
Headline has
been read
New or unread
headline
Tap to return to
the channel list
Tap a headline to open
the news summary screen
Audio/Video/Image
file attachment is
downloading
Tap to download audio/
video file attachment
New or unread headlines display in bold and are marked with a blue newspaper
icon. Headlines that have been read are marked with a gray newspaper icon.
172 Internet
View the news summary
Tap a headline in the headline list to display the news summary.
Channel name
Headline and
read status
Audio/Video/Image
file attachment.
Tap to download
the file.
News summary
Tap to open the news
item in Opera Mobile.
See “Using Opera
Mobile” in this chapter
for details.
Tap to return to the headline list
To change view options
In the news summary screen, tap Menu to change the text size, fit the text to the
screen (text wrap), or enable ClearType for better viewing.
Internet 173
To download, play, or save podcasts
1. When you see an audio or video file attachment
in the news summary, do one of the following to
download the file:
•
Tap Menu > Podcasts > Start Download.
•
Tap the Download audio/Download video
link below the audio/video file icon.
Tip
To cancel the file download, tap Menu >
Podcasts > Cancel Download, or tap Cancel
download below the audio/video file icon.
2. After downloading the file, do one of the
following:
•
Tap Menu > Podcasts > Play or tap Play
audio/Play video below the audio/video file
icon to play back the file.
•
Tap Menu > Podcast > Save to save a copy
of the file to the device main memory or
storage card.
To send the headline link via e-mail
1. In the news summary screen, tap Menu > Send Link via Email.
2. Messaging opens and displays the Account Picker screen. Tap the e‑mail
account you want to use to send the headline link.
A new e-mail message is then created with the headline link.
3. Specify the e-mail recipients, then send it.
Note
For more information on how to compose e-mails, see “Using E-mail” in Chapter 6.
174 Internet
To view the next or previous news summary
In the news summary screen, tap Menu > Next or Menu > Previous, or press
NAVIGATION left or right.
For more information about the features and configuring RSS Hub, refer to the
online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9
Bluetooth
9.1 Bluetooth Modes
9.2 Bluetooth Partnerships
9.3 Connecting a Bluetooth Hands-free or
Stereo Headset
9.4 Beaming Information Using Bluetooth
9.5 Bluetooth Explorer and Bluetooth
File Sharing
9.6 Printing Files via Bluetooth
176 Bluetooth
9.1 Bluetooth Modes
Bluetooth is a short-range wireless communications technology. Devices with
Bluetooth capabilities can exchange information over a distance of about eight
meters without requiring a physical connection.
Bluetooth on your device operates in three different modes:
• On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled
devices, but not vice versa.
• Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can
detect your device.
• Off. Bluetooth is turned off. In this mode, you can neither send nor receive
information using Bluetooth.
Notes
• By default, Bluetooth is turned off. If you turn it on, then turn off your device,
Bluetooth also turns off. When you turn on your device again, Bluetooth
automatically turns on.
• Turn off Bluetooth when not in use to conserve battery power, or in places where
using a wireless device is prohibited, such as on board an aircraft and in hospitals.
To turn Bluetooth on and make your device visible
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Mode tab.
2. Select the Turn on Bluetooth and Make this device visible to other devices
check boxes.
3. Tap OK. The Title bar will show
to indicate that the device is in Visible
mode.
To turn off Bluetooth visibility after a certain period of time
You can automatically turn off Bluetooth visibility after a specified period of time.
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Timeout tab.
2. In Turn off Visible mode, select the time before your device’s Bluetooth
visibility turns off. Tap OK.
Bluetooth 177
9.2 Bluetooth Partnerships
A Bluetooth partnership is a relationship that you create between your device and
another Bluetooth-enabled device in order to exchange information in a secure
manner.
To create a Bluetooth partnership
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab.
2. Tap Add new device. Your device displays the names of other Bluetooth
devices within range.
3. Tap the device name in the box, then tap Next.
4. Specify a passcode to establish a secure connection. The passcode can be 1
up to 16 characters.
5. Tap Next.
6. Wait for the paired device to accept the partnership. The receiving party
needs to enter the same passcode that you specified.
7. After the receiving party enters the passcode, a message box appears on your
device confirming the partnership.
Tip
Tap Advanced to change the paired device name and to set the services you
want to use for the paired device. After setting the name and options, tap Save.
8. Tap Done.
Note
Creating a Bluetooth partnership between two devices is a one-time process. Once
a partnership is created, the devices can recognize the partnership and exchange
information without entering a passcode again.
178 Bluetooth
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection. The passcode must be
between 1 and 16 characters.
4. Tap Next.
5. Tap Done. You can now exchange information with the paired device.
Tips
• To rename a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab of the Bluetooth screen, then tap Edit.
• To delete a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab, then tap Delete.
9.3 Connecting a Bluetooth Hands-free or Stereo
Headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset
such as a car kit with your device. Your device also supports A2DP (Advanced Audio
Distribution Profile) which allows you to use a Bluetooth stereo headset for handsfree phone conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are turned
on and within close range, and that the headset is visible. Refer to the
manufacturer’s documentation to find out how to set the headset in visible
mode.
2. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab > Add new device.
Bluetooth 179
3. Tap the name of the Bluetooth headset, then tap Next. The device will
automatically pair the device with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat step 1 to 2 above. Tap and hold the name of the Bluetooth stereo headset and
tap Set as Wireless Stereo.
9.4 Beaming Information Using Bluetooth
You can beam information, such as contacts, calendar items, tasks, and files from
your device to your computer or to another Bluetooth-enabled device.
Note
If your computer does not have built-in Bluetooth capability, you need to connect
and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1. Turn on Bluetooth on your device, and make your device visible. For
information about this, see “To turn Bluetooth on and make your device
visible”.
2. Set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
Note
If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle and enable the adapter/dongle to be discovered by other
devices. Refer to the Bluetooth adapter’s documentation for more information.
If your computer has Windows Vista or Windows XP SP2 and your
computer’s Bluetooth adapter is supported by your Windows version, do the
following steps:
180 Bluetooth
a. On your computer, open Bluetooth Devices from the Control Panel, then
click the Options tab on the Bluetooth Devices window.
b. For Windows Vista, select Allow Bluetooth devices to find this
computer.
For Windows XP, select Turn discovery on and Allow Bluetooth devices
to connect to this computer.
c. Create a Bluetooth partnership between your device and computer. For
information about creating a partnership, see “Bluetooth partnerships”.
d. In the Options tab of Bluetooth Devices, select Show the Bluetooth
icon in the notification area.
e. To enable your computer to receive Bluetooth beams, right-click the
Bluetooth icon in the notification area at the bottom-right corner of
your computer screen and select Receive a File. You are now ready to
beam.
3. On your device, select an item to beam. The item can be an appointment in
your calendar, a task, a contact card, or a file.
4. To beam a contact, tap Menu > Send Contact > Beam.
To beam other types of information, tap Menu > Beam [type of item].
5. Tap the device name to which you want to send the item.
6. If you beamed a calendar, task, or contact item to your computer and it is not
automatically added to Outlook, select File > Import and Export in Outlook
to import it.
To beam information to a Bluetooth-enabled device such as another Windows
Mobile-powered device, follow steps 1 to 5 in the above procedure.
Tips
• The default folder on your computer where beamed items are stored may be
C:\Documents and Settings\your_username\My Documents in Windows XP or
C:\Users\your_username\My Documents in Windows Vista.
• For your device to receive Bluetooth beams, tap Start > Settings > Connections
tab > Beam and make sure the Receive all incoming beams check box is selected.
Bluetooth 181
9.5 Bluetooth Explorer and Bluetooth File Sharing
Bluetooth Explorer searches for other Bluetooth devices that have file sharing
enabled and lets you access their Bluetooth shared folder. You can copy files from
and to their shared folder, and create subfolders in it. When you enable Bluetooth
file sharing on your device, other Bluetooth-enabled devices will also be able to
access your Bluetooth shared folder.
To enable Bluetooth Explorer and Bluetooth file sharing on your device
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > FTP tab.
2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth
device folder visible in File Explorer.
3. Select the Enable File Sharing check box.
You can use the default Bluetooth shared folder, or tap Browse to use
another folder as your shared folder.
4. Tap OK.
To use Bluetooth Explorer
1. Bluetooth Explorer is integrated with the File Explorer program. You can
open it by tapping Start > Programs > Bluetooth Explorer or by tapping
the down arrow ( ) on the upper left of File Explorer screen then tapping
Bluetooth.
182 Bluetooth
2. Bluetooth Explorer then scans for other
Bluetooth devices that have file sharing
enabled. From the list, tap to select a
Bluetooth device you want to connect to.
You may need to enter a passcode in order
for you to connect to the selected device.
If there are files contained in the Bluetooth
shared folder on the other device, you
will be able to see them on the Bluetooth
Explorer screen.
3. Select one or more files, then tap Menu > Edit and choose to cut or copy the
files.
4. Tap Up twice.
5. Navigate to the folder where you want to paste the files on your device, then
tap Menu > Edit > Paste.
9.6 Printing Files via Bluetooth
Connect your device to a Bluetooth printer to print contact information,
appointment details, images, and other file types.
Note
You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats.
Before you start printing, make sure to turn on the Bluetooth printer and to turn
on Bluetooth on your device. To turn on Bluetooth, tap Start > Programs > Comm
Manager, then tap the Bluetooth button.
Bluetooth 183
To print contact information
1. On the Home screen, slide to the People tab and then tap All People.
2. Select the contact whose information you want to print.
3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device
starts to search for Bluetooth devices.
4. Select the Bluetooth printer and tap Menu > Send File.
5. Set the printing options you want, then tap Print.
To print a calendar appointment
1. Tap Start > Calendar, then select (highlight) the appointment whose details
you want to print.
2. Follow steps 3 to 5 in the “To print contact information” procedure.
To print a JPEG file
1. In Pictures & Videos, locate the JPEG file you want to print.
2. Tap and hold the JPEG image file and then on the menu, tap Print via
Bluetooth.
3. Follow steps 3 to 5 in the “To print contact information” procedure:
To print a text file
1. In File Explorer, locate the text file you want to print.
2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth.
3. Follow steps 3 to 5 in the “To print contact information” procedure:
184 Bluetooth
Chapter 10
Navigating on the Road
10.1 Google™ Maps (Available by Country)
10.2 Guidelines and Preparation for Using GPS
10.3 Downloading Satellite Data via QuickGPS
186  Navigating on the Road
10.1 Google™ Maps (Available by Country)
Google™ Maps lets you track your current location, view real-time traffic situations,
and receive detailed directions to your destination. It also allows you to search and
locate places of interest or even a contact address.
Note
You need an active data connection or Wi-Fi connection to use Google Maps.
To launch Google Maps
Tap Start > Programs > Google Maps.
Note
The first time you launch Google Maps, you will be asked to accept terms and
conditions when using Google Maps. You must agree to the terms and conditions for
you to be able to launch and use Google Maps.
The Google Maps screen
Tap to zoom in
on the map.
Your current location.
Tap to zoom
out on the map.
Tap to search for places of
interest and addresses.
Notes
Tap to open a menu where you
can set Google Maps to find and
display your current location,
get directions, see traffic
information, look up a contact
address, and more.
• Currently, traffic information is only available for the U.S.
• Tap Menu > Options > Reset Google Maps to reset the Google Map cookies,
history of search terms, preferences, and image cache.
• Tap Menu > Help > Tips to learn more about the program and its many features.
Navigating on the Road 187
Search for a place of interest
You can easily search and locate a place of interest such as hotels, restaurants, and
other places using Google Maps. Google Maps can also show details on how to
contact and reach the place of interest from your current location.
Note
You can also enter keywords, street addresses, or postal codes when searching places
using Google Maps.
1. On the Google Maps screen, tap Search.
2. Enter the place of interest you want to find, and then tap Search:
3. Search results will then be listed. Tap the desired place from the list to view its
address, phone number, and other details.
4. On the Address tab, you can:
•
Tap the web address to go to the web site of the place of interest.
Note
•
This information only appears when the web site of the place of interest is
available.
Tap the [phone number] to call the place of interest that you have
selected.
188 Navigating on the Road
•
Tap Directions to here or Directions from here to get directions on how
to get to the place of interest from your current location or vice versa.
•
Tap Search nearby to search for other places of interest near your current
location.
•
Tap Send as text message to send the contact information of the place of
interest via SMS.
For more information about Google Maps, you can visit the following web site:
http://www.google.com/gmm/index.html.
10.2 Guidelines and Preparation for Using GPS
If you install a GPS software on your device, please follow these guidelines before
and when using your device as a GPS device.
•
Do not operate the GPS system while driving. The plotted GPS route is only
for driving reference. It should not interfere with actual driving behavior.
•
Do not leave your device in a vehicle or expose the device to direct sunlight
to avoid overheating the battery, which could pose damage to the device or
risk to the vehicle.
•
When using the device inside a vehicle, use the car holder to mount the
device securely in place. Avoid placing the device in the areas shown in the
following diagram:
Navigating on the Road 189
1 Do not place where it will block the driver’s vision.
2 Do not place where air bags could deploy.
3 Do not place anywhere in the vehicle without securing the device in the
holder.
•
Please use the GPS system cautiously. Users shall be liable for any damages
resulting from negligent operation of the system.
•
The GPS signal cannot pass through solid non-transparent objects. Signal
reception may be affected by obstructions such as high-rise buildings,
tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s
visor contains metal, it will be difficult for the GPS signal to pass through.
•
Wireless communication products (such as mobile phones or radar-detecting
devices) may interfere with the satellite signal, resulting in unstable signal
reception.
•
The Global Positioning System (GPS) is built and operated by the US
Defense Department. The Department is responsible for the accuracy and
maintenance of the system. Any changes that the Department makes may
affect the accuracy and function of the GPS system.
190 Navigating on the Road
10.3 Downloading Satellite Data via QuickGPS
Before you start using your device for GPS navigation, open the QuickGPS program
first to download ephemeris data (current satellite position and timing information)
onto your device. This data is needed to determine the GPS position of your current
location.
QuickGPS downloads ephemeris data from a web server, instead of from the
satellites, using the Internet connection on your device, which can be via Wi-Fi,
ActiveSync or GPRS/3G. This significantly speeds up the time for determining your
GPS position.
To open QuickGPS
Tap Start > Programs > QuickGPS.
To download data
Tap Download on the QuickGPS screen.
On the screen, initially, you will see the Valid
time of the downloaded data. As time passes,
the remaining days and hours of validity will be
shown.
To speed up GPS positioning, download the
latest ephemeris data when the validity of the
data expires.
Navigating on the Road 191
Download options
To configure download times, tap Menu > Options and choose from the available
options:
•
Remind me when data expires.
Enables your device to display a reminder message when the validity of the
ephemeris data has expired.
When you see the reminder message, tap Menu to dismiss the reminder or to
set the snooze time so that you will be reminded again. Tap OK to open the
QuickGPS program and download the latest data.
•
Auto download when data expires.
Allows ephemeris data to be automatically updated onto your device when
the data has expired.
•
Auto download when connected to PC via ActiveSync.
Allows ephemeris data to be automatically downloaded via ActiveSync to
your device when your device is connected to your computer. Your computer
must be connected to the Internet in order to download data.
Note
The ephemeris data is stored on HTC web servers. QuickGPS is preconfigured to
connect to these servers.
192  Navigating on the Road
Chapter 11
Experiencing Multimedia
11.1 Taking Photos and Videos
11.2 Viewing Photos and Videos Using Album
11.3 Using Windows Media® Player Mobile
11.4 Using Audio Manager
11.5 Using Audio Booster
194 Experiencing Multimedia
11.1 Taking Photos and Videos
Use Camera to take photos and record video clips.
To open the Camera screen
1. On the Home screen, slide to the Photos and Videos tab.
2. Tap the Camera icon (
) or the Video Camera icon (
).
The screen orientation automatically switches to landscape mode when you open
Camera.
Tip
You can also tap Start > Programs > Camera to open the Camera program.
To exit the Camera
Tap the screen first to display the Camera screen icons, and then tap the
Exit icon (
).
Capture modes
The camera on your device allows you to capture pictures and video clips by using
various built-in modes that provide you flexibility in taking your shots.
To change the capture mode
If icons are not showing on the screen, tap
the screen first to display the Camera screen
icons, and then do one of the following to
select a capture mode:
•
Press NAVIGATION left or right
(Landscape orientation).
•
Tap the middle icon at the bottom of
the screen (the icon displayed is based
on the current Capture mode.). On the
Capture Mode menu, tap the capture
mode you want to use.
Current capture mode
Experiencing Multimedia 195
You can select from the following capture modes:
Icon
Capture Mode
Photo Captures standard still images.
Video Captures video clips, with or without accompanying audio.
Panorama Captures a sequence of still images continuously in one
direction, and allows stitching of all the images to create a panoramic
view of a scenery.
MMS Video Captures video clips suitable for sending with MMS
messages.
Contacts Picture Captures a still image and gives you the option to
immediately assign it as a Photo ID for a contact.
Picture Theme Captures still images and places them within frames.
Supported file formats
Using the available capture modes, the camera in your device captures files in the
following formats:
Capture mode
Format
Photo / Contacts Picture /
Picture Theme / Panorama
JPEG
Video / MMS Video
H.263 (.3gp) ; MPEG-4 (.mp4)
196 Experiencing Multimedia
Capture photos and videos
Use the ENTER button as the shutter release when capturing photos and videos:
•
Press the ENTER button to take a photo or to start capturing video.
•
In Video or MMS Video mode, press ENTER again to stop recording.
•
In Picture Theme or Panorama mode, press ENTER for each shot you need to
take.
On-screen controls and indicators
Tap the screen to display the controls and indicators.
Photo, Video, MMS Video, and
Contacts Picture modes
6 5
When capturing in Video and MMS
Video modes
1 Zoom control. Tap
Tip
to zoom in, or
to zoom out.
You can also press NAVIGATION up/down (Landscape orientation) to zoom in or
out.
2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for
details.
Experiencing Multimedia 197
3 Capture mode. Displays the current capture mode. Tap to open the Capture
Mode menu where you can choose from available capture modes.
4 Menu. Tap to display the Menu Panel. See “Menu Panel” for details.
5 Exit. Tap to exit the Camera program.
6 Remaining information indicator. In Photo, Contacts Picture, Picture Theme,
and Panorama modes, this shows the remaining/available shots of pictures
based on the current settings.
In Video and MMS Video modes, this shows the remaining duration that can
be recorded. While recording video, this shows the recorded duration.
7 Recording indicator. Flashes when recording a video.
Picture Theme mode
8 Template
Selector icon. In Picture Theme mode, tap to toggle among
different templates.
9 Progress
indicator. In Picture Theme and Panorama modes, this shows the
number of consecutive shots.
198 Experiencing Multimedia
Menu Panel
The Menu Panel provides a quick way of adjusting the most common camera
settings and lets you access more advanced camera settings. On the Camera screen,
tap
to open the Menu Panel. To adjust a setting, keep tapping a button on
the panel, for instance, White Balance, to cycle through the available settings. To
access advanced options, tap
Note
The available settings on the panel depend on the selected capture mode.
1 Resolution. Tap to select the resolution to use when taking photos or
capturing videos.
2 Storage. Select where you want to save your files. You can either save the files
to the main memory ( ) or to a storage card (
if one is installed..
3 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off when
in the Photo or Contacts Picture mode. When you press the ENTER button to
capture a still image, it starts to count down, then captures a still image after
the time expires.
4 Advanced. Tap to access the advanced camera settings. See “Advanced
Options” for details.
Experiencing Multimedia 199
5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On
the Brightness bar, tap
to decrease, or
to increase the brightness level.
Tap outside the Brightness bar to apply the change.
6 White Balance. White balance enables the camera to capture colors more
accurately by adjusting to different lighting conditions. White balance
settings include: Auto (
), Daylight (
), Night (
), Incandescent (
),
and Fluorescent (
).
Zooming
Before capturing a photo or a video clip, you can zoom in to make the object in
focus move closer, or zoom out to make the object move farther away.
To zoom in
Press NAVIGATION up (Landscape orientation), or tap
To zoom out
Press NAVIGATION down (Landscape orientation), or tap
The camera zoom range for a photo or a video clip depends on the capture mode
and resolution. Refer to the table for more information.
Capture mode
Photo
Resolution
Zoom range
3M (2048 x 1536)
1.0x to 2.0x
2M (1600 x 1200)
1.0x to 2.0x
1M (1280 x 960)
1.0x to 2.0x
Large (640 x 480)
1.0x to 2.0x
Medium (320 x 240)
1.0x to 4.0x
200 Experiencing Multimedia
Capture mode
Video
Panorama
MMS Video
Contacts Picture
Picture Theme
Resolution
Zoom range
CIF (352 x 288)
1x and 2x
Large (320 x 240)
1x and 2x
Medium (176 x 144)
1x and 2x
Small (128 x 96)
1x and 2x
Large (640 x 480)
1x and 2x
Medium (320 x 240)
1x, 2x and 4x
Medium (176 x 144)
1x and 2x
Small (128 x 96)
1x and 2x
Medium (240 x 320)
Determined by the current
template
1.0x to 4.0x
Depends on the size of the
selected template
Experiencing Multimedia 201
The Review screen
After capturing, the Review screen lets you view, send, or delete the photo or video
clip by tapping an icon at the bottom of the screen.
Review screen
icons
Icon
Function
Back Return to the live Camera screen.
Delete Delete the captured image or video.
View View the captured image in the Album program.
Play Play back the captured video or MMS video in the Album program.
Send Send the captured image or video via e-mail or MMS.
Assign to Contact After capturing in Contacts Picture mode, tap this icon to
assign the photo to a selected contact.
202 Experiencing Multimedia
Advanced Options
The Advanced Options let you adjust options for your selected capture mode
and set Camera program preferences. Access the Advanced Options by tapping
Advanced on the Menu Panel.
You can either tap on-screen or press NAVIGATION up/down (Landscape
orientation) to navigate through the Advanced Options screen.
Tap an item to
change the setting.
Tap to go through
the different
Advanced Camera
Settings screens.
Tap to go back to
the Camera screen.
•
Review Duration. Set a time length for displaying the captured image/video
on the Review screen. Select No Limit if you do not want to impose a time
limit. Select No Review to immediately return to the live Camera screen after
capturing and saving.
•
Quality. Select the JPEG image quality level for all captured still images.
Choose from Basic, Normal, Fine, and Super Fine.
•
Capture Format (Video and MMS Video mode). Select the desired file format.
•
Time Stamp (Photo mode). Choose whether or not to include the shooting
date and time on captured photos.
•
Keep Backlight. Turn the backlight on or off. This overrides your device
backlight settings while you are using the camera.
•
Shutter Sound. Choose whether or not you want the camera to make a
shutter sound when you press the ENTER button.
Experiencing Multimedia 203
•
Image Properties. This option lets you adjust the image Contrast,
Saturation, and Sharpness.
Tap a property to adjust.
Tap to reset all properties to their default
values.
Tap to save the settings.
Tap
/ or press NAVIGATION
left/right (Landscape orientation) to
increase/decrease the value.
Tap to close the Image Properties screen
without applying and saving the changes.
•
Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
•
Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
•
Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note
•
If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
Counter. To reset the file naming counter back to 1, tap Reset.
204 Experiencing Multimedia
•
Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
•
Grid (Photo mode). Choose whether or not to show a grid on the Camera
screen. Showing a grid helps you frame and center your subject easily and
accurately.
Grid marks
•
Record with Audio (Video and MMS Video mode). Select On to record audio
with the captured video clips, or select Off to capture video without audio.•
•
Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
•
Template (Picture Theme mode). Select a template.
•
Template Folder (Picture Theme mode). By default, templates are stored
in the \My Documents\Templates folder on the device’s Main Memory. If
you transferred some templates to a storage card (via File Explorer), set this
option to Main + Card to specify that templates are located in both the main
memory and the storage card.
Experiencing Multimedia 205
•
Show Reminder (Contacts Picture mode). Select On if you want the Camera
to always display a message that confirms whether or not to assign the
captured picture to a contact.
•
Direction (Panorama mode). Choose in what direction images will be
stitched in a panorama.
•
Stitch Count (Panorama mode). Select the desired number of images to be
captured and stitched into a panorama.
•
Help. Tap to open the Camera program help file.
•
About. Tap to display version and copyright information.
11.2 Viewing Photos and Videos Using Album
Use Album to view images and videos in your device. Album offers a host of
features that let you rotate images, view your images as a slideshow, use images as
contact pictures, and more.
Note
Album can only display files in the BMP, GIF, PNG, JPG, Animated GIF, 3GP, MP4, and
WMV formats.
Launch Album
Do one of the following:
•
On the Home screen, slide to the
Photos and Videos tab and tap
Album.
•
In the Camera program, tap
•
Tap Start > Programs > Album.
Note
Album is always displayed in
landscape mode.
Tap to open the Camera program.
206 Experiencing Multimedia
Select a photo or video to view
1. On the main Album screen, tap Albums and then select the album to view.
The contents of the album are then displayed on the main Album screen.
2. Browse through the files by sliding your finger upward or downward.
3. Do one of the following:
•
Tap an image to view it in full screen mode. See “View an image” for
details.
•
Tap a video file (files with the
icon) to play back the video file. See “Play
back video” in this chapter for details.
•
Select a still image and then tap Menu > Slideshow to view the images in
the album as a slideshow. Animated GIF and video files will not be played
back in the slideshow. See “To view still images as a slideshow” in this
chapter for details.
View an image
While viewing an image in full screen, tap the screen or press ENTER to open the
on-screen menu.
Tap to send the
image using one
of the Messaging
accounts.
Tap to start the
slideshow.
Tap to go back to
the main Album
screen, Photos
and Videos tab, or
Camera.
Tap to open a menu
where you can save the
screen image as a photo
for a contact, save the
current image as a new
file, delete the image, and
view file properties.
Experiencing Multimedia 207
Tip
You can delete multiple files at once by selecting Menu > Delete Items on the main
Album screen and then selecting the files to delete.
To rotate the image
While viewing an image in full screen, make a half-circle gesture on the screen with
your finger to rotate the image.
To rotate the image 90 degrees clockwise,
make a downward half-circle gesture on
the screen.
To rotate the image 90 degrees
counter-clockwise, make an upward
half-circle gesture on the screen.
To view the next or previous image
When viewing images in full screen, go to the next image by swiping your finger
across the screen from right to left. Go back to the previous image by swiping your
finger from left to right.
208 Experiencing Multimedia
To zoom in or out of an image
While viewing an image, make a full-circle gesture on the screen with your finger.
Slide your finger clockwise on an area to
zoom in on that area.
Slide your finger counter-clockwise to
zoom out.
Tips
• When you zoom in on an image, double-tap the screen to automatically zoom out
and fit the image to the screen.
• When you zoom in on an image, tap and hold the screen so you can pan the
image.
• When you zoom in on an image, tap the screen to open the on-screen menu. On
the on-screen menu, tap
and then select Save Screen Image to save the
image on-screen as a new file.
Experiencing Multimedia 209
To view still images as a slideshow
While viewing the slideshow, tap the screen to show playback controls.
Tap to open the
Slideshow Options
screen where you can set
the transition effect to
use, time per slide, and
orientation of the images.
Tap to return to
the main Album
screen or the
Photos and
Videos tab.
Tap to go back to the
previous image.
Tip
Tap to play or pause the
slideshow playback.
Tap to go to the
next image.
If the images are in your favorite album, you can start the slideshow from the Photos
and Videos tab on the Home screen. On the Photos and Video tab, tap Slideshow.
210 Experiencing Multimedia
Play back video
While playing back video, tap the screen to show the playback controls.
Drag to go forward
or backward in the
video.
Elapsed time
Total duration
Tap to go back to
the beginning of
the video.
Tap to stop
video playback.
Tap to play or pause
video playback.
Tip
If the video is in your favorite album, you can start the video playback from the
Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Close Album
Close Album by tapping
on the main Album screen. When viewing files in full
screen mode, tap the screen to show the on-screen menu or playback controls and
then tap
to go back to the main Album screen.
Experiencing Multimedia 211
11.3 Using Windows Media® Player Mobile
Windows Media® Player Mobile plays digital audio and video files that are stored
on your device or on a network, such as on a web site.
Video File Formats Supported
Windows Media Video
MPEG4 Simple Profile
H.263
H.264
Motion JPEG
File Extensions
.wmv, .asf
.mp4
.3gp, .3g2
.mp4, .3gp, .3g2, .m4v
.avi
Audio File Formats Supported
Windows Media Audio
WAVE
MP3
MIDI and SP MIDI
AMR Narrow Band
AMR Wide Band
AAC, AAC+, and eAAC+
MPEG4 audio
QCELP
EVRC
File Extensions
.wma
.wav
.mp3
.mid, .midi, .rmi
.amr, .3gp
.awb,.3gp
.aac, .mp4, .m4a, .3gp
.m4a
.qcp, .3g2
.qcp
To open Windows Media® Player Mobile
Tap Start > Programs > Windows Media.
212 Experiencing Multimedia
About the controls
Tap and drag to
jump to any part of
the video or audio
Mute/Unmute
Full screen
Increase volume
Visit WindowsMedia.com
Decrease volume
Skip to the beginning of
Skip to the next file
the current file or to the
Play/Pause
previous file
About the screens and menus
Windows Media® Player Mobile has three primary screens:
•
Playback screen. The screen that displays the playback controls (such as Play,
Pause, Next, Previous, and Volume) and the video window. You can change
the appearance of this screen by choosing a different skin.
•
Now Playing screen. The screen that displays the Now Playing playlist. This
special playlist indicates the current file being played and any files that are
“queued up” to play next.
•
Library screen. The screen that lets you quickly find your audio files, video
files, and playlists. It contains categories such as My Music, My Videos, My TV,
and My Playlists.
Experiencing Multimedia 213
At the bottom of each screen, you can open a Menu. The commands on this menu
vary, depending on which screen you are viewing. For more information about the
commands in these menus, see Help on your device.
Synchronize video and audio files
Use the latest version of Windows Media® Player on your computer to synchronize
digital media files from your computer to your device. This ensures that protected
files and album art (for skins) are copied to your device correctly.
To synchronize content to your device automatically
1. On your computer, open Windows Media® Player, then connect your device to
your computer.
2. In the Device Setup Wizard, select Yes, search my computer now.
Note
If you have previously opened Windows Media® Player and searched for media
on your computer, you will not be prompted to search your computer in Step 2.
3. On the Device Setup dialog box, enter a name for your device and click
Finish.
Note
If you installed a storage card that has a capacity of more than 4GB and
your entire library can fit into the storage card, Windows Media Player will
automatically synchorize your music files. The device also needs to be set to Disk
Drive mode for Windows Media Player to automatically synchronize.
4. On the left panel of Windows Media® Player, right-click the name of your
device and click Set Up Sync.
Note
To set up media synchronization on a storage card, right-click Storage Card in the
left panel of Windows Media® Player, then click Set Up Sync.
5. Select the playlist(s) that you want to sync between your computer and
device, then click Add.
Note
On the Device Setup dialog box, make sure that the Sync this device
automatically check box is selected.
6. Click Finish.
214 Experiencing Multimedia
The files will begin synchronizing to your device. The next time you connect your
device to your computer while Windows Media® Player is running, synchronization
will start automatically.
To synchronize content manually to your device
1. If you have not set up media synchronization between your device and
computer, follow steps 1 to 3 in “To synchronize content to your device
automatically”.
2. Click the Sync tab on the Windows Media® Player of your computer. Select a
Playlist or a Library on the left panel of the Windows Media® Player.
3. From the Content List, drag the media files that you want to sync to your
device and drop them to the Sync List.
Playlists and Library List
Content List
Sync List
4. Click Start Sync to start synchronizing the selected files to your device.
Experiencing Multimedia 215
Notes
• Use Windows Media® Player 11 or higher on your computer to synchronize media
files to your device.
• Audio files copy faster if Windows Media® Player is configured to automatically set
the quality level for audio files copied to your device. For more information, see the
Windows Media® Player Help.
Play media
Use the Library to find and play songs, videos, and playlists that are stored on your
device or an installed storage card.
To update the Library
1. If you are not on the Library screen, tap Menu > Library.
2. On the Library screen, tap the Library arrow (near the top of the screen), then
tap the media storage that you want use, for example, Storage Card.
3. In most cases, Windows Media® Player Mobile automatically updates the
library. However, you can manually update the library to ensure that it
contains new files that you recently copied to your device or storage card.
Tap Menu > Update Library to manually update the library list.
To play video and audio files on your device
1. Select a category (for example, My Music or My Playlists).
2. Tap and hold the item that you want to play (such as a song, album, or artist
name), then tap Play.
Tips
• To play a media file that is stored on your device but is not in a library, on the
Library screen, tap Menu > Open File. Tap and hold the item that you want to play
(such as a file or a folder), then tap Play.
• To play a media file from the Internet or a network server, tap Menu > Library then
tap Menu > Open URL.
216 Experiencing Multimedia
Playlists
In Windows Media® Player Mobile, you can create a new playlist by saving the
current Now Playing playlist and giving it a new name.
To save a new playlist
1. If you are not on the Library screen, tap Menu > Library.
2. Tap to select a category (for example, My Music or My Playlists).
3. Select a media file that you want, then tap Menu > Queue Up. This adds the
file to the Now Playing list.
Repeat this step until you have added all desired media files to the Now
Playing list.
Note
You cannot select multiple files simultaneously.
4. After adding the media files, tap Menu > Now Playing.
5. On the Now Playing screen, tap Menu > Save Playlist.
6. Enter the playlist name, then tap Done.
7. To play back the playlist you created, tap My Playlists in the Library, select
your playlist, then tap Play.
Troubleshooting
If you encounter a problem while using the Windows Media® Player Mobile, see the
Troubleshooting Windows Media® Player Mobile page at the Microsoft web site :
http://www.microsoft.com/windows/windowsmedia/player/windowsmobile/
troubleshooting.aspx.
Experiencing Multimedia 217
11.4 Using Audio Manager
Audio Manager is a music browser and player in one. It gives you access to all the
music files on your device, and allows you to easily browse for the music that you
want to play by organizing music into categories such as title, artist, album, and
more. You can also create playlists of your favorite songs and use the integrated
Music Player to play them back.
To launch Audio Manager
Tap Start > Programs > Audio Manager.
Notes
• Audio Manager searches for all music files stored on your device memory and
memory card that have the following audio formats: MP3, WMA, AAC, and AAC+. It
will search in the following locations:
		 Device:
My Music (including all subfolders)
\My Documents (including all subfolders)
		 Memory card: \Storage Card (including all subfolders)
• Music files are categorized under Artists, Album, Genre, and more, if such
metadata is found in the files.
Library
When you launch the Audio Manager, the Library screen opens and displays
categories such as All Songs, Artists, Genre, and more. An arrow that appears to
the right of a category indicates that it has submenus.
When you tap a category on the Library’s Main screen, you will see more submenus
which may have deeper levels of menus. For example, when you tap Artists,
another level of submenus will be listed showing artist names. When you tap an
artist name, more submenus showing album names will be displayed. Just keep
opening the submenus until you reach the level where song titles can be selected
for playback.
218 Experiencing Multimedia
Library: Main screen
Library: Artists screen
Music files that are protected by Digital Rights Management (DRM) will be listed
under the Protected category. A lock icon shown before song titles indicates that
the music files are protected. Select a file then tap Info if you want to view file
information. A cross-marked lock icon shown before song titles indicates that the
rights for the music files have expired, and you will not be able to play them. Tap
Delete if you want to delete these files.
Note
Audio Manager keeps track of the last submenu that you accessed. When you exit
Audio Manager and open it again, it will display the last submenu that you were in.
Keep tapping the submenu name at the top of the screen until you reach the Library's
Main screen.
Experiencing Multimedia 219
Music Player
When you select a music file in the Library, Music Player opens and automatically
plays it. Use the available buttons to control the playback.
Repeat
Shuffle
Play/Pause
Playback time
Drag the slider to move
forward or backward in
a music track.
Go to previous
music track
Go to next
music track
Return to
Library screen
Open a menu where you can choose
to add the current song to a playlist,
set the song as ring tone, and more.
Playlists
The Playlists screen shows the current playlists that are found on the device
memory and memory card.
There are two types of playlists that will be shown on the Playlist screen:
•
Windows Media® Player playlists. These are playlists that are in Windows
Media® Player Mobile’s Library (which is synchronized with Windows Media®
Player on your computer), and they are indicated by the Windows Media®
Player icon (
). They can be played in Audio Manager’s Music Player but
cannot be edited.
220 Experiencing Multimedia
•
Custom playlists. These are playlists that are created in Audio Manager and
can be edited.
To create a playlist
1. On the Library’s Main screen, tap Playlists.
2. On the Playlists screen, tap Menu > New.
3. Enter a Playlist name then tap OK.
4. On the Playlists screen, tap the playlist you have just created then tap Menu >
Edit.
5. Tap Menu > Add.
6. Tap the check boxes to select the songs you want to add to the playlist, or tap
Menu > Select All to choose all the songs.
7. Tap OK three times to return to the Playlists screen.
To play back a playlist
1. On the Playlists screen, tap to select a playlist.
2. Tap the first song in the selected playlist. Music Player automatically opens
and starts playing the first song. After each song, the next one in the playlist
will be played.
Note
Playlists are not automatically updated when music files have been deleted from the
device memory or memory card.
Set music as ring tone
You can set your favorite music as a ring tone for your device.
1. Use the NAVIGATION CONTROL to select a song in the Library or tap a song to
play it in Music Player, then tap Menu > Set as Ring Tone.
2. If the selected music is an MP3 file, tap Trim if you want to trim it first to make
it shorter.
Experiencing Multimedia 221
Mark the part of the music that
will be used as the ring tone.
Drag the left handle to mark the
start time, then drag the right
handle to mark the end time.
Play/Stop
For more precise marking, you
can also tap these controls to
step backward/forward one
step and mark it.
Confirm
trimming the
ring tone.
Cancel
trimming.
3. Tap Set as Default Ring Tone.
Tip
If you only want to save the song to the ring tone folder for future use, tap Save
to Ring Tone Folder. Later on, you can tap Start > Settings > Personal tab >
Phone to set it as your ring tone.
4. A confirmation message is then displayed. Tap OK.
222 Experiencing Multimedia
11.5 Using Audio Booster
Audio Booster optimizes sound for a better listening experience. It provides preset
moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit
different types of music.
To access Audio Booster
Tap Start > Programs > Audio Booster.
This control
Does this
1 On
Select the check box to enable
or disable the equalizer.
2 Equalizer
presets
Tap to choose the Equalizer
preset to use.
3 Done
Tap to apply the modified
settings.
4 Menu
• Tap Menu > Cancel to exit
Audio Booster without
applying the modified
settings.
• Tap Menu > Save as Preset
or Delete Preset to save
or delete preset equalizer
settings.
5 Frequency
band
To use an Equalizer preset
Tap the list box then select a desired preset.
Drag the sliders to adjust the
frequency.
Experiencing Multimedia 223
To create a custom equalizer preset
1. Adjust the frequency bands to your desired values by dragging the equalizer
controls. The selected values are indicated on top of the sliders.
2. Save your equalizer settings as a preset by tapping Menu > Save as Preset.
3. Enter a preset name and then tap Done. The preset you created will be added
to the list box.
To delete a custom equalizer preset
1. Tap the list box then select the Equalizer preset you want to delete.
2. Tap Menu > Delete Preset.
Note
You can only delete custom equalizer presets. Equalizer presets that are pre-installed
cannot be deleted.
224 Experiencing Multimedia
Chapter 12
Programs
12.1 Accessing Programs on Your Device
12.2 Adding and Removing Programs
12.3 Adobe® Reader® LE
12.4 Calendar
12.5 Contacts
12.6 Comm Manager
12.7 Microsoft® Office Mobile
12.8 Notes
12.9 Java
12.10 SIM Manager
12.11 Spb GPRS Monitor (Available by Country)
12.12 Sprite Backup
12.13 Tasks
12.14 Voice Recorder
12.15 Voice Speed Dial
226  Programs
12.1 Accessing Programs on Your Device
You will find preinstalled programs in the Start menu and on the Programs screen
of your device.
To launch and use a program
Do one of the following:
•
Tap Start to open the Start menu and then tap a desired program.
•
To access more programs, tap Start > Programs, or slide to the Programs tab
on the Home screen and then tap All Programs.
12.2 Adding and Removing Programs
Additional programs, such as the programs in the Application disc or other
programs that you purchase, can be installed and uninstalled on your device. Your
device does not allow you to uninstall most of the preinstalled programs.
Note
Before you purchase additional programs for your device, make sure that they are
compatible with your device.
To install a program
1. Download the program to your computer (or insert the CD or disk that
contains the program into your computer).
You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions
of files for different device types and processors. Be sure to select only the
programs designed for your device.
2. Read any installation instructions or documentation that comes with the
program. Many programs provide special installation instructions.
3. Connect your device to the computer.
4. Double-click the installation setup file.
Programs 227
To uninstall a program
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the program you want to
remove, then tap Remove.
12.3 Adobe® Reader® LE
Adobe® Reader® LE is an application for viewing PDF (Portable Document Format)
documents on your device. It supports a subset of the features found in the PC
versions of Adobe Reader.
To open Adobe Reader LE
Tap Start > Programs > Adobe Reader LE.
To open a PDF file on your device
• Open a PDF file in Adobe Reader LE; or
•
Open File Explorer, find the PDF file, then tap the file to open it.
To navigate through a PDF document
You can use the controls in the program and finger gestures to navigate a PDF
document.
•
Tap Tools > View > Continuous and then slide your finger up or down the
screen to scroll through the pages in the document.
Tip
You can also drag the scroll bars to scroll through the pages.
•
Tap to zoom in or
to zoom out. After zooming in, slide your finger on
the screen to pan the current page.
•
Press NAVIGATION up/down/right/left to move to the desired direction of the
page.
•
Tap to return to the previous page; tap to move to the next page. Tap
to jump to the first page; tap to jump to the last page.
•
Tap Tools > Go To > Page Number to enter a page number that you want to
view.
228 Programs
To search for text in the document
1. Tap Tools > Find > Text or tap
in the toolbar.
2. Type in the text to be searched, then tap Find.
The matched text in the document will be highlighted.
3. To view the next occurrence of the text, tap Tools > Find > Next.
Tips
• Adobe Reader LE displays a bookmark pane for the PDF files that contain
bookmarks. Tap the bookmarks to go to a specific section/page within the file.
• Adobe Reader LE supports password-protected PDF files with up to 128-bit
encryption. When you open a password-protected PDF file, you will be prompted
to enter the password before opening it.
12.4 Calendar
Use Calendar to create appointments, including meetings and other events. You
can also synchronize Calendar appointments between your device and computer.
To open the Calendar screen
• On the TouchFLO Home screen, tap Calendar or a displayed appointment; or
•
Tap Start > Calendar.
Create appointments
To schedule an appointment
1. Open the Calendar screen and then tap Menu > New Appointment.
2. Enter a name for the appointment.
3. Do one of the following:
•
•
If it is a special occasion such as a birthday or a whole-day event, set the
All Day option to Yes.
If there is a time frame for the appointment, set the start and end dates
and times.
Programs 229
4. Specify the type of category for your appointment, so that it can be grouped
with other related appointments. Tap Categories, then select a preset
category (Business, Holiday, Personal, or Seasonal), or tap New to create your
own category.
5. When finished, tap OK to return to the calendar.
Notes
• All-day events do not occupy blocks of time in Calendar; instead, they appear in
banners at the top of the calendar.
• To remove an appointment, tap Menu > Delete Appointment.
Tip
To have the time entered automatically in Day view, tap and drag to select a time slot
for the new appointment, and tap Menu > New Appointment.
To set the reminder time for new appointments
By default, Calendar has been set to display a reminder alert when you have new
upcoming appointments. You can change the reminder time.
1. Open the Calendar screen.
2. Tap Menu > Tools > Options > Appointments tab.
3. Make sure the Set reminders for new items check box is selected.
4. Set the time when you want the reminder to alert you.
5. Tap OK to return to the Calendar screen.
230 Programs
View appointments
By default, Calendar displays appointments in Agenda view. You can also look at
your appointments in Day, Week, Month, and Year views.
The highlighted hours
here indicate the time of
your appointments.
The red box and
arrows indicate
that there are
conflicting
appointments.
Tap to view appointment
details.
Tap to switch views.
Agenda view
•
To see detailed appointment information in any view, tap the appointment.
•
To view appointments by category, tap Menu > Filter, then select the desired
category.
•
To change the default view that Calendar uses to display appointments, tap
Menu > Tools > Options > General tab. Tap the Start in box, then choose
the calendar view.
•
When in Month view, you will see the following indicators:
Morning appointment
Afternoon or evening appointment
Both morning and afternoon/evening appointments
All-day event
Programs 231
Send appointments
To send a meeting request
Use Calendar to schedule meetings via e-mail with contacts who use Outlook or
Outlook Mobile.
1. Open the Calendar screen.
2. Schedule a new appointment, or open an existing one and tap Menu > Edit.
3. Tap Attendees, then tap Add Required Attendee or Add Optional
Attendee and add the contacts whom you want to invite.
Note
You can specify if an attendee is required or optional only if your device is
connected to a Microsoft Exchange 2007 server. Otherwise, all attendees are
designated as required. For more information, see “Managing Meeting Requests”
in Chapter 7.
4. When you have finished adding attendees, tap Done.
5. Tap OK to send.
Tip
To choose the e-mail account to use for sending meeting requests, tap Menu > Tools
> Options > Appointments tab. Tap the Send meeting requests via box and choose
to send via your Outlook E-mail, POP3/IMAP4 or Windows Live™ account.
Notes
• If you’re sending the meeting request using your Outlook E-mail account, it will
be sent to the attendees the next time you synchronize your device with your
computer or Exchange Server.
• When attendees accept your meeting request, the meeting is automatically
added to their schedules. When their response is sent back to you, your calendar is
updated as well.
To send appointment details as a vCalendar
A vCalendar is a standard file format used for exchanging scheduling and task
information. vCalendar files can be exported to Outlook on the computer.
After selecting the appointment to send in the Calendar screen, tap Menu >
Send as vCalendar to send a vCalendar containing appointment details as a file
attachment in an MMS message. For more information, see “MMS” in Chapter 6.
232  Programs
12.5 Contacts
Contacts is your address book and information storage for people and businesses
you communicate with. You can add the following types of contacts to your device:
•
Outlook contacts. Contacts that are stored on your device, which can be
created on your device or synchronized with your PC or the Exchange Server.
•
SIM contacts. Contacts that are stored on the SIM card. Only a name and
phone number can be stored for each entry.
•
Windows Live™ contacts. Contacts that you communicate with using
Windows Live™ Messenger or MSN.
Note
You can only add Windows Live™ contacts after you have set up Windows Live™
on your device. See “Add Windows Live contacts” in Chapter 8 for details.
To open the Contacts screen
Do one of the following:
•
On the TouchFLO Home screen, slide to the People tab and then tap All
People; or
•
Tap Start > Contacts.
Add new contacts
To add a contact on your device
1. Open the Contacts screen.
2. Tap New, select Outlook Contact, and enter the contact information.
3. In the File as field, choose how you want the contact name to appear in the
contact list.
4. To add a photo of the contact, tap Select a picture, and then select the
picture file or tap Camera to take a photo of the contact.
Programs 233
5. To assign a ring tone to the contact, tap the Ring tone field, scroll through
the list of tones, then select a desired tone.
6. When finished, tap OK.
Tips
• If a person who is not in your list of contacts called you and you want to save that
person’s phone number, tap and hold the phone number in the Call History and
then tap Save to Contacts from the shortcut menu.
• To save a phone number that is contained in a message, open the message, tap the
underlined phone number, and then tap Menu > Save to Contacts.
• To edit contact information, tap the contact name and then tap Menu > Edit.
To add a contact to your SIM card
1. Open the Contacts screen.
2. Tap New, then select SIM Contact.
3. Enter a contact name and phone number.
4. Tap OK.
Tip
You can also use the SIM Manager to add and edit contacts on your SIM card. For
more information, see "SIM Manager" in this chapter.
Organize and search contacts
To group similar contacts
For easier management, you can group similar contacts by assigning them to
categories.
1. Create a new Outlook contact or edit an existing Outlook contact.
2. Tap Categories.
3. Select a preset category such as Business or Personal, or tap New to create
your own category.
4. When finished, tap OK.
234 Programs
To find a contact on your device
There are several ways to find a contact when your contact list is long:
•
Begin entering a contact name in the provided text box until the contact you
want is displayed.
•
On the Quick Scroll bar on the right of the Contacts screen, scroll to or tap a
letter to go directly to the part of the contacts list where contact names start
with that letter.
Quick Scroll
bar
Note
•
•
You can disable the Quick Scroll bar by tapping Menu > Options and selecting
the Show alphabetical index check box. This will show the alphabetical index at
the top of the Contacts list.
Filter the list by categories. In the contact list, tap Menu > Filter, then tap
a category you’ve assigned to a contact. To show all contacts again, select
Menu > Filter > All Contacts.
Programs 235
Share contact information
To beam a contact’s details
You can quickly send contact information to another mobile phone or device
through Bluetooth beaming.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > Beam, then select a device where to beam the
contact to.
Note
Before beaming, make sure Bluetooth is turned on and set to visible mode on your
device and the target mobile device. You can also beam contact information to your
computer. See Chapter 9 for details.
To send contact information via text messaging
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > SMS \ MMS.
3. Select the contact information you want to send, then tap Done.
4. In the new text message, enter the mobile phone number of the recipient,
then tap Send.
To send contact information as a vCard
A vCard (virtual business card) is a standard file format used for exchanging contact
information. vCard files can be exported to Outlook on the computer. From your
device, you can send a vCard containing contact information as file attachment in
an MMS message.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send as vCard.
3. A new MMS message is created with the vCard file attached. Enter the mobile
phone number or e-mail address of the recipient, then tap Send.
For more information, see “MMS” in Chapter 6.
236  Programs
12.6 Comm Manager
Comm Manager is a central location where you can easily turn on and off the
communication features of your device such as the phone, Wi-Fi, data connection,
Bluetooth, and more.
To access the Comm Manager
Do one of the following:
•
On the TouchFLO Home screen, slide to the Settings tab and then touch
Communications.
•
Touch Start > Programs > Comm Manager.
•
Touch Start > Settings > Connections tab > Comm Manager.
1 Switch Airplane Mode on or off. Turning on Airplane Mode turns off the phone, Wi-Fi and
Bluetooth functions. For more information, see "To enable or disable Airplane Mode" in
Chapter 2.
2 Switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone
settings. See “Changing Basic Settings” in Chapter 13 for details.
3 Switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your
device. See Chapter 9 for details.
Programs 237
4 Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network
connection settings. See “Wi-Fi” in Chapter 8 for details.
5 Switch between automatically receiving (as items arrive) or manually retrieving Outlook
e-mails. See Chapter 7 for details.
6 Turn your data connection (such as 3G or GPRS) on or off. See “Starting a Data
Connection” in Chapter 8 for details.
12.7 Microsoft® Office Mobile
Microsoft® Office Mobile consists of the following applications:
•
Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks
and templates on your device.
•
Microsoft® Office OneNote® Mobile lets you create notes with text,
photos, and voice recordings for synchronization later with Microsoft® Office
OneNote® 2007 on your computer.
•
Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide
show presentations in *.ppt and *.pps formats.
•
Microsoft® Office Word Mobile lets you create and edit documents and
templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.
To use Microsoft Office Mobile
1. Tap Start > Office Mobile.
2. Tap the Office Mobile application that you want to use.
Word Mobile and Excel Mobile do not fully support some features of Microsoft®
Office Word and Microsoft® Office Excel®. To see a complete list of features that are
not supported in Word Mobile and Excel Mobile, see Help on your device.
238 Programs
Tips
• By default, Word Mobile saves documents in .docx format, while Excel Mobile
saves workbooks in .xlsx format. If you want to open these types of files on
a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you
need to download and install the File Format Converter in your computer.
You can find this converter at http://www.microsoft.com/downloads/details.
aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
• If you want Word Mobile to save documents in .doc format, tap Menu > Tools >
Options (or Menu > Options when no document is opened), then change the
Default template to Word 97-2003 Document (.doc).
• If you want Excel Mobile to save workbooks in a format that is compatible with
Microsoft Office 2000, Office XP, or Office 2003, tap Menu > Options (with no
workbook opened), then change the Template for new workbook to Blank 972003 Workbook.
12.8 Notes
Using Notes, you can create handwritten and typed notes, record voice notes,
convert handwritten notes to text for easy readability, and more.
To create a note
1. Tap Start > Programs > Notes. In the note list, tap New.
2. Choose an input method and then enter your text.
Tip
For more information about input methods and entering text, see Chapter 4.
3. When finished, tap OK to save and return to the note list.
Notes
• To select handwritten text, tap and hold next to the writing. As soon as dots
appear, and before they form a complete circle, quickly drag across the writing.
• If a letter crosses three ruled lines, it is treated as a drawing rather than text.
To draw in a note
1. Create or open a note file.
2. Use the stylus to draw on the screen. A selection box then appears around
your drawing.
Programs 239
3. Tap OK to save.
Note
To select a drawing (for example, to copy or delete it), tap and hold the drawing
briefly. When you lift the stylus, the drawing is selected.
To record a voice note
You can create a stand-alone recording (voice note) or you can add a recording to
a note.
1. Tap Start > Programs > Notes.
2. If you do not see the Recording toolbar, tap Menu > View Recording
Toolbar.
3. Do one of the following:
• To add a recording to a note, create or open a note.
•
To create a stand-alone recording, record from the note list.
4. Tap the Record icon (
) to begin recording your voice. Tap the Stop icon (
) when you are finished recording.
Tip
To select the voice recording format, return to the note list and then tap Menu >
Options > Global Input Options link (at the bottom of the Options screen). On the
Input screen, tap the Options tab and choose the desired format from the Voice
recording format list.
240 Programs
12.9 Java
MIDlets are Java applications such as games and tools that can run on mobile
devices, while a MIDlet suite is a collection of one or more MIDlets. The Java
program lets you download, install and manage MIDlets or MIDlet suites on your
device. Your device supports Java 2 Micro Edition, J2ME.
To open the Java program
Tap Start > Programs > Java.
Install and launch MIDlets/MIDlet suites
There are several ways to install a MIDlet/MIDlet suite.
To download and install via Internet Explorer Mobile
1. Tap Menu > Install > Browser to open Internet Explorer Mobile.
2. Locate the MIDlet/MIDlet suite while connected to the Internet.
3. Select the MIDlet/MIDlet suite to download.
4. Information about the MIDlet/MIDlet suite is then displayed. Tap Continue.
5. Confirm to start downloading.
6. Select  or a folder where to install the MIDlet suite to, then tap OK.
To install from your device
You can copy MIDlets/MIDlet suites from the computer to your device using the
USB sync cable or Bluetooth connection. Copy them to the root folder or any
subfolder on your device.
1. Tap Menu > Install > Local Files. The program then searches for MIDlets/
MIDlet suites on your device and displays them in a list.
2. From the list, tap the MIDlet/MIDlet suite that you want to install.
3. Confirm to start the installation.
4. Select  or a folder where to install the MIDlet suite to, then tap OK.
Programs 241
To run a MIDlet/MIDlet suite
Do one of the following:
•
After installation of the MIDlet/MIDlet suite is complete, tap Yes.
•
On the Java screen, open the folder that contains the MIDlet/MIDlet suite.
Select the MIDlet/MIDlet suite, then tap Launch.
Manage MIDlets/MIDlet suites
You can organize MIDlets/MIDlet suites into folders for easy identification,
renaming, updating, and more. If the device memory is full, uninstall some MIDlets/
MIDlet suites to free up memory space.
To create folders
1. On the Java screen, tap Menu > New Folder.
2. Enter a folder name, then tap Create.
To update a MIDlet/MIDlet suite
Tap and hold a MIDlet/MIDlet suite, then tap Update. Alternatively, you can tap
Menu > Actions > Update.
Java will search for updates for the selected MIDlet/MIDlet suite where it was
installed from before.
To uninstall MIDlets
Before you uninstall a MIDlet, make sure that it is not running.
1. Tap and hold the MIDlet, then tap Uninstall.
2. Tap OK to confirm.
Note
To uninstall all MIDlets and folders from the current folder, tap Menu > Uninstall All.
242  Programs
12.10 SIM Manager
SIM Manager allows you to view the contents of your SIM card, transfer contacts
from your SIM card to your device or vice versa, and make a call to a SIM contact.
To create a contact on your SIM card
1. Tap Start > Programs > SIM Manager.
2. Tap New and enter a contact name and phone number.
3. Tap Save to save the information on your SIM card.
Tip
To change contact information on your SIM card, tap a SIM contact, edit the
information, and then tap Save.
To copy SIM contacts to your device
If you have saved contacts on your SIM card, you can copy them into Contacts on
your device.
1. On the SIM Manager screen, select the desired contact, or select all SIM
contacts by tapping Menu > Select All.
2. Tap Menu > Save to Contacts.
To copy contacts to the SIM card
Only one phone number per contact name can be stored on a SIM card. When you
copy a contact that has several phone numbers to your SIM card, SIM Manager
saves each number under a separate name.
To save each number under a different contact name on the SIM card, SIM Manager
appends an indicator at the end of each name.
By default, /M, /W and /H are appended to indicate mobile, work and home phone
numbers respectively. You can edit this indicator first before you start copying
contacts to your SIM card. Indicators of the other types of phone numbers are left
empty for you to define them.
Programs 243
1. On the SIM Manager screen, tap Menu > Tools > Options.
2. Select the check boxes of the types of phone numbers that you want to be
added to the SIM card.
3. Under the Mark column, you can change the
indicator that will be appended to the SIM
contact names for each phone number type. To
do so, select a phone type, tap Edit, enter your
desired indicator, then tap Save.
4. After modifying, tap OK.
5. Tap Menu > Contacts to SIM.
6. Select the check boxes of the contact’s phone
numbers that you want to copy to your SIM card,
then tap Save.
To store your SIM card’s phone number
1. On the SIM Manager screen,
tap Menu > Tools > List of
Own Numbers.
2. Tap Voice Line 1.
3. Change the name, if desired,
then enter your mobile
phone number.
4. Tap Save.
When your phone
number is stored
on the SIM card,
it will appear on
the SIM Manager
screen.
244 Programs
12.11 Spb GPRS Monitor (Available by Country)
Using Spb GPRS Monitor, you can monitor how much data you have sent and
received on your device, and check the network usage costs by taking into account
your service plan details. You can also view connection cost and traffic charts,
generate reports of network connection usage, and export reports to CSV files for
use with Microsoft® Office Excel® and Access.
Install GPRS Monitor
The GPRS Monitor program is included in the Application disc. To install it onto
your device, run the program’s installer on your computer. Follow the on-screen
instructions on your computer and your device to complete the installation.
The GPRS Monitor icon and pop-up window
You can enable the GPRS Monitor icon to be shown on the title bar. This icon shows
the data connection or dial-up connection speed, data traffic, and battery status.
To show the GPRS Monitor icon on the title bar
1. Tap Start > Programs > Spb GPRS Monitor.
2. Tap Tools > Options > Icon tab.
3. Select the Show taskbar icon check box.
By default, the GPRS Monitor icon shows three bars that represent the following
status information:
Icon Bar 2: Traffic
(Full bar corresponds to
100%. Each bar is 20%.)
Icon Bar 1: Speed
(Full bar corresponds
to 19KB/sec.)
Icon Bar 3: Battery
(Each bar corresponds to
20% of the total charge.)
Programs 245
When you tap the GPRS Monitor icon on the title bar,
a pop-up window opens and shows you detailed
statistics about your data transfers, such as the
data size you have just transferred and its cost, the
allowable amount of data that you can transfer, and
more.
Set up monitoring and notification
To select the connection to be monitored
1. On the GPRS Monitor screen, tap Tools > Options > Connection tab.
2. Select the Enable connection monitoring check box.
3. In the Connection list, select the connection you want to monitor.
To enter your service plan details
Service plan details, or tariffs, determine the price that you pay for your data
transfers. The tariff may either be flat rate or time-based, depending on whether
you’re using GPRS or a phone dial-up connection for data transfers.
Contact your wireless service provider to find out about your tariff, and enter the
information in the Tariff tab or the Tariff Details tab on the Options screen.
Note
The calculation of network usage costs is based on the information that you entered,
and is only an estimate. The actual amount billed by your service provider may differ.
246  Programs
To set up traffic limit notifications
You can set up traffic limit notifications if you want to be notified when a traffic limit
is reached.
1. On the GPRS Monitor screen, tap Tools > Options.
2. Enable the notifications on the Day Warn and Month Warn tabs. You can
specify up to three daily and three monthly limits.
Once traffic reaches one of these limits, you will receive a notification.
View charts and reports
On the GPRS Monitor, you can view network connection cost charts and traffic
charts, as well as generate detailed reports of network connection usage during
a given period of time. These reports can be exported to CSV files that you can
open using Excel, Access, or other similar spreadsheet and database software
applications.
To view charts and generate reports
On the GPRS Monitor screen:
•
Tap the Chart tab to view the network connection cost charts and traffic
charts.
•
Tap the Report tab to generate reports on network traffic and tariff.
For more information about using Spb GPRS Monitor, see Help on your device.
Programs 247
12.12 Sprite Backup
Use Sprite Backup to back up data, which includes settings, files, contacts, and all
other information, to the device memory, storage card or a computer.
Note
If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you use Sprite Backup to back up your
files including settings, contacts and other information to your computer or a storage
card.
To install Sprite Backup
1. Make sure your device is connected to your computer via a USB cable.
2. Insert the Application disc on your computer’s disc drive and start the Sprite
Backup installation.
3. Follow the on-screen instructions to install the Sprite Backup PC Manager to
your computer and the Sprite Backup program onto your device.
To open Sprite Backup
On your device, tap Start > Programs > Sprite Backup.
Before you start to back up or restore files, please check the following:
•
Make sure that the device storage memory has at least 15MB of free space.
To check, tap Start > Settings > System tab > Memory > Main tab.
•
If you have a storage card installed, make sure that it has at least 100MB of
free space. To check, tap Start > Settings > System tab > Memory > Storage
Card tab.
To back up data
1. To back up data remotely to a computer, enable the PC backup feature first.
See “To enable remote backup to a computer” for instructions.
2. On the Sprite Backup main screen, tap Backup.
3. On the Backup Data Selection screen, you will see a tree view of the data and
files on your device. Tap “+” on the left of an item to view its sub-items.
248 Programs
Use the check boxes to select or exclude items for backup.
Main screen
Notes
Backup Data Selection screen
 It is recommended that you do not back up the File System of your device as
this may cause restoration problems. To not back up the File System, expand
the System Data folder by tapping “+” on its left side and then clearing the File
System checkbox.

When File System is not backed up, you will need to reinstall all third party
software to your device after you do a hard reset and restored your files.
4. After selecting data items, tap Next. The Save As screen then appears.
5. Enter a file name for the backup file.
6. In Location, choose whether to save the backup file to \Storage Card (if one
is installed), \My Documents on the device memory, or to a PC.
Tip
When backing up to a storage card or to \My Documents on the device memory,
you can also choose a specific folder where to save the backup file.
7. Tap Next.
8. On the Device Reset Required screen, tap Next to start the backup.
Note
Do not start and use any programs on your device until the backup process is
completed.
Programs 249
To restore data
1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches
for all available backup files from the device memory and storage card and
then displays them on the Open File screen.
Tip
To search for backup files created on your computer, connect your device to
your computer and run Sprite Backup PC Manager on your computer. In Sprite
Backup’s Open File screen on your device, set Location to PC.
2. Select the backup file you want to restore and then tap Next.
3. In the tree view, select the items you want to be restored to your device and
then tap Next.
Note
If your phone has SIM PIN lock enabled, a screen will appear asking you to set up
Sprite Backup SIM Unlock feature. It is recommended that you set up this feature
to avoid file restoration errors. To set up, tap Setup Phone SIM Lock.
4. On the Device Reset Required screen, tap Next to begin restoring data.
Note
Sprite Backup soft resets your device first before it begins the backup or restoration
process. It soft resets again after the operation is completed.
To enable remote backup to a computer
1. On the Sprite Backup main screen, tap Options > Networking > PC.
2. Select the Enable PC Backup check box and choose whether to do the
remote backup to your computer via ActiveSync or network.
For more information about using Sprite Backup, see the Sprite Backup Help or
download the Sprite Backup User Manual from http://www.spritesoftware.com/.
250 Programs
12.13 Tasks
Use Tasks to keep track of things you need to do. A task can occur once or
repeatedly (recurring).
Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder
will be displayed when you have new tasks to be completed.
To create a task
1. Tap Start > Programs > Tasks.
2. Tap Menu > New Task, enter a subject for the task, and fill in information
such as start and due dates, priority, and so on.
3. Specify the type of category for your task, so that it can be grouped with
other related tasks. Tap Categories, then select a preset category (Business,
Holiday, Personal, or Seasonal), or tap New to create your own category.
4. When finished, tap OK.
To change the priority of a task
Before you can sort tasks by priority, you need to specify a priority level for each
task.
1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and tap a priority level in the Priority box.
4. Tap OK to return to the task list.
Note
All new tasks are assigned a Normal priority by default.
To show start and due dates in the task list
1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Show start and due dates check box, then tap OK.
Programs 251
To send task information as a vCalendar
After selecting the task to send in the Task screen, tap Menu > Send as vCalendar
to send a vCalendar containing task details as a file attachment in an MMS message.
For more information, see “MMS” in Chapter 6.
12.14 Voice Recorder
Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail
attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Note
Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband)
format only. This is a common speech audio format used in mobile devices.
To record your voice
1. Tap Start > Programs > Voice Recorder.
2. Hold the device’s microphone close to your mouth.
3. Touch Record or
recording.
to start recording. Tap Stop or
to end the
To select or create a folder where to save voice recordings
By default, all recordings are saved in the My Voices folder of the device. You can
choose another folder or create a new folder to save your voice recordings.
Note
If a storage card is installed before you open Voice Recorder, the recordings are saved
in the My Voices folder on the storage card by default.
1. Tap the arrow beside the folder name on the top-left of the screen.
2. In the menu that opens, choose an existing folder or touch Add/Delete to
create a new folder.
To play back a voice recording
On the Voice Recorder screen, touch a voice recording, or navigate to a voice
recording and then tap Play (
).
252  Programs
Tip
If you need to adjust the sound volume, touch any of the status icons on the title bar
and then touch the Volume icon (
) to open the System Volume screen where you
can adjust the volume.
To send a voice recording through MMS
Select a voice recording, then tap Menu > Send via MMS. A new MMS message is
then created with the voice recording automatically inserted as an audio clip.
See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
To send a voice recording via e-mail
Select a voice recording, tap Menu > Send, and then select an e-mail account.
This creates a new e-mail message with the voice recording inserted as a file
attachment.
See “Using E-mail” in Chapter 6 to learn how to send e-mails.
To beam a voice recording via Bluetooth
1. Select the voice recording you want to beam, then tap Menu > Beam File.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All.
2. Tap the device you want to send the voice recording to.
3. On the other device, accept the file transfer to receive the file.
To set a voice recording as ring tone
Select the voice recording, then tap Menu > Set as Ringtone.
To rename or move a recording
1. Select the voice recording, then tap Menu > Rename/Move.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All. Note that you can move multiple files, but you cannot
rename multiple files simultaneously.
2. In Name, enter the new voice recording name.
3. To move the voice recording, select the new destination Folder and
Location. Tap OK.
Programs 253
12.15 Voice Speed Dial
You can record voice tags so that you can dial a phone number or launch programs
simply by speaking a word.
To create a voice tag for a phone number
1. On the TouchFLO Home screen, slide to the People tab and then touch All
People to open the Contacts screen.
Tip
You can also touch Start > Contacts to open the Contacts screen.
2. Do one of the following:
•
Scroll to the desired contact, then touch Menu > Add Voice Tag.
•
Touch the desired contact to open the contact card and then touch Menu
> Add Voice Tag.
•
Use the stylus to tap and hold the desired contact, then tap Add Voice
Tag.
3. Select the phone number that you want to create a voice tag for, then touch
Record (
).
Select the
desired
phone
number.
Touch the
Record
icon to start
recording.
254 Programs
Tip
To ensure voice recognition accuracy, record your voice in a quiet place.
4. When completed, a Voice Tag icon
is displayed on the right of the item.
To create a voice tag for a program
Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab.
The Application tab displays a list of all installed programs on your device. The
procedure for creating a voice tag for a program is the same as the procedure for
creating a voice tag for a phone number.
To make a call or launch programs using a voice tag
1. Touch Start > Programs > Voice Speed Dial.
2. After the beep, say the recorded voice tag that you have assigned to the
phone number you want to call or the program you want to launch. The
system will repeat the voice tag, then dial out or launch the program
automatically.
Note
If the system cannot recognize your voice tag, move to a quiet place, then try again
while speaking clearly.
To view and test the voice tags you have created
1. Touch Start > Settings > Personal tab > Voice Speed Dial.
2. The Voice Tag tab displays a list that contains all the voice tags you have
created. Select an item in the list, then do one of the following.
•
Touch the Record button (
•
Touch the Play button (
•
Touch the Delete button (
) to rebuild the voice tag.
) to play the voice tag.
) to delete the voice tag.
Programs 255
12.16 ZIP
The ZIP program increases the storage capacity of your device by allowing you to
compress files in the conventional ZIP format. It also allows you to extract files from
a zip file.
To start ZIP on your device
Tap Start > Programs > ZIP.
Each time you start ZIP, it searches for files that have the .zip file extension, and
displays these files on the Archive List screen.
To open a ZIP file and extract files
1. Touch a zip file to open it, or navigate to a zip file and then touch File > Open
Archive.
Note
You cannot select multiple ZIP files.
2. From the zip file, select files by doing one of the following:
•
•
•
Touch a file to select it.
To select several files, touch Menu > Action and make sure Multi-Select
Mode is selected. Select files by touching each file. (Touch a selected file
to deselect it).
To select all files, touch Menu > Action > Select All.
3. Touch Menu > Action > Extract.
4. Choose a folder where the files will be extracted to, then touch Extract.
5. Touch Menu > File > Close Archive to close the zip file.
To create a new zip archive
1. Touch File > New Archive.
2. On the Save As screen, enter the zip file name and choose a folder where
you want to save it. You can also choose whether to save the zip file on the
device’s main memory or a storage card.
256  Programs
3. Touch Save.
4. Touch Menu > Action > Add.
5. Navigate to the folder that contains the files you want to archive.
6. Select files to add by doing one of the following:
• Touch a file to select it.
• To select several consecutive files, drag over the files.
• To select several non-contiguous files, use the stylus to tap and hold on
the screen and then select Multi-Select Mode. Select files by tapping
each file. (Tap a selected file to deselect it).
• To select all files, use the stylus to tap and hold on the screen and then tap
Select All.
7. Touch Add.
8. Touch Menu > File > Close Archive to save and close the zip file.
Chapter 13
Managing Your Device
13.1 Copying and Managing Files
13.2 Settings on your Device
13.3 Changing Basic Settings
13.4 Using Connection Setup
13.5 Using Task Manager
13.6 Protecting Your Device
13.7 Managing Memory
13.8 Resetting Your Device
13.9 Windows Update
13.10 Battery Saving Tips
258 Managing Your Device
13.1 Copying and Managing Files
You can copy files between your device and computer, or copy files to a storage
card installed on your device. You can also efficiently manage your files and folders
using File Explorer.
To copy files using Windows Mobile Device Center or ActiveSync
1. Connect your device to the computer.
2. Click File Management > Browse the contents of your device in Windows
Mobile Device Center on your computer, or click Explore in ActiveSync on
your computer. This opens Windows Explorer on your computer and displays
the contents of your device.
3. To copy a file from your device to your computer:
a. Browse the contents of your device, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your computer, then click Paste.
4. To copy a file from your computer to your device:
a. Browse the folders on your computer, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your device, then click Paste.
To manage files on your device using File Explorer
File Explorer lets you browse and manage the contents of your device. The root
folder on the device is named My Device, and contains the following folders: My
Documents, Program Files, Windows, and more.
1. Tap Start > Programs > File Explorer.
2. Tap a folder or file to open it.
3. To return to an upper level folder, tap Up and select the folder.
4. To quickly delete, rename, or copy a file, tap and hold the file, then choose
Managing Your Device 259
the desired operation on the shortcut menu. To copy or delete multiple files,
tap and drag over the desired files to select, tap and hold the selection, then
choose the desired operation on the shortcut menu.
To copy files to a storage card
1. Make sure that the storage card is properly installed on your device.
2. Tap Start > Programs > File Explorer and navigate to the appropriate folder.
3. Tap and hold the file you want to copy, then tap Copy.
4. Tap the down arrow (
), then tap Storage Card in the list.
5. Tap and hold an empty area on the screen and then select Paste on the
menu.
Tip
You can configure programs such as Word Mobile and Excel Mobile to directly save
edited files onto a storage card. In the program's file list, tap Menu > Options, then
select the Storage Card in the Save to box.
13.2 Settings on your Device
You can adjust the device settings to suit the way you work. To see all available
settings, slide to the Settings tab on the Home screen and tap All Settings.
Personal tab
Icon
Description
Buttons Assign a program or function to a hardware button. You can also set the
behavior when you press and hold the END key.
Input Set options for each of the input methods.
Lock Set a password for your device.
260 Managing Your Device
Icon
Description
Menus Set which programs will appear in the Start menu.
Owner Information Enter your personal information on your device.
Phone Customize phone settings such as ring tone, set a PIN number for your
SIM card, and more.
Sounds & Notifications Enable sounds for events, notifications, and more, and
set the type of notification for different events.
Today Customize the appearance and the information to be displayed on the
Today screen.
Note
You will not see the Today screen when the TouchFLO Home screen
is enabled. To display the Today screen, you can disable TouchFLO by
tapping Start > Settings > Personal tab > Today > Items tab and then
clearing the TouchFLO check box. However, you will not be able to use
the TouchFLO Home screen if you disable it.
Voice Speed Dial Create voice tags for voice dialing contacts and SIM contacts as
well as for launching programs.
System tab
Icon
Description
About This is where you can see basic information such as the Windows Mobile®
version and type of processor used on your device. You can also specify a name
for your device.
Certificates See information about certificates that are installed on your device.
Managing Your Device 261
Icon
Description
Clear Storage Reset your device to factory default settings.
Clock & Alarms Set the device clock to the date and time of your locale or to a
visiting time zone when you’re traveling. Alarms can also be set at specified days
and times of a week.
Customer Feedback Set your device to automatically send information about
how you use Windows Mobile. By default, this option is disabled.
Device Information See information about the firmware version, hardware,
identity, and the duration of calls made on your device.
Encryption Encrypt files on your storage card. Encrypted files will only be
readable on your device.
Error Reporting Enable or disable the device's error reporting function. When
this function is enabled and a program error occurs, technical data about the state
of the program and your computer will be logged in a text file and delivered to
Microsoft's technical support if you choose to send it.
External GPS Set the appropriate GPS communication ports, if required. You may
need to do this when there are programs on your device that access GPS data or
you have connected a GPS receiver to your device. See Help for details.
Key Lock Lock the buttons on your device except for the POWER button when
the device is in Sleep mode. This ensures you will not switch the device on by
accident and consume unnecessary power.
Managed Programs Displays the programs that were installed on your device
using System Center Mobile Device Manager.
Memory Check the device memory allocation status and storage card
information.
262 Managing Your Device
Icon
Description
Microphone AGC Adjust the volume of your voice automatically when you are
recording.
Power Check the remaining battery power. You can also set the brightness of
the backlight and timeout for turning off the display (switching device to Sleep
mode) to conserve battery power.
Regional Settings Set the regional configuration to use, including the format for
displaying numbers, currency, date, and time on your device.
Remove Programs Remove programs that you installed on your device.
Screen Recalibrate the screen, apply ClearType, and change the screen text size.
Task Manager Stop running programs and set the (
) button to end programs
immediately when you tap the button. For more information, see "Using Task
Manager" in this chapter.
TouchFLO You can enable or mute the finger scrolling and panning sound. You
can also enable or disable the large Start menu, and choose to show or hide the
System Status screen when title bar icons are tapped.
Windows Update Link to Microsoft's web site and update Windows Mobile® on
your device with the latest security patches or fixes, if they are available.
Managing Your Device 263
Connections tab
Icon
Description
Advanced Network Turn on/off HSDPA, set the line type to use when making
circuit switch data (CSD) connection, and set the GPRS authentication method.
HSDPA is a 3.5G digital data service that provides high-speed downstream data
rates. In order for your device to attain the high connection speed of HSDPA, your
wireless service provider must support this feature and you must be within the
coverage area of your service provider’s HSDPA network. Your device supports up
to 7.2 Mbps download speeds.
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other
Bluetooth devices.
Comm Manager Manage your device’s connections (including GPRS, Wi-Fi,
and Bluetooth), turn the phone on or off, and enable or disable the Direct Push
function.
Connection Setup Configure your device’s data connections, such as 3G/GPRS,
WAP, and MMS, based on the detected or selected network operator. See “Using
Connection Setup” in this chapter for details.
Connections Set up one or more types of modem connections for your device,
such as phone dial-up, 3G/GPRS, and more, so that your device can connect to the
Internet or a private local network.
Domain Enroll Enroll your device in your company’s domain to let System
Center Mobile Device Manager to manage the device. Please ask your Server
Administrator for more details.
USB to PC Set the type of USB connection to your computer. Select the
ActiveSync option for synchronizing data, or use Disk Drive mode to quickly
transfer files to the storage card on your device. See “When Connecting Your
Device to a Computer” in Chapter 1 for details.
264 Managing Your Device
Icon
Description
Wi-Fi Scan for available wireless networks.
Wireless LAN See information about the active wireless network, and customize
Wi-Fi settings.
13.3 Changing Basic Settings
Date and time
To set the date and time
1. On the Home screen Home tab, tap the time display and then tap the Time
tab.
Tip
Tap the More tab and select the Display the clock on the title bar in all
programs option to show the clock on all screens.
2. Select the correct time zone and change the date or time.
Note
During synchronization, the time on your device is updated with the time on your
computer.
To set the date and time for a different location
If you visit or communicate with someone in a particular time zone often, you can
select it as your visiting time zone.
1. On the Home screen Home tab, tap the time display and then tap the Time
tab.
2. Tap Visiting.
3. Select the correct time zone and change the date or time.
Managing Your Device 265
Regional settings
The style in which numbers, currency, dates, and times are displayed is specified in
regional settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Regional Settings > Region tab and then select your
region from the list.
Note
This does not change the language of your device’s operating system.
The region you select determines which options will be available on the other
tabs.
3. To customize regional settings further, tap the appropriate tabs and set the
desired options.
Display settings
To adjust the screen brightness
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Backlight tab.
3. Clear the Auto adjust backlight check box to display the sliders for adjusting
brightness.
4. Adjust the brightness by dragging the slider under On battery power and
On external power.
To set the backlight to dim after a time delay
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Advanced tab.
3. In On battery power and On external power, select the Turn off backlight
if device is not used for check box, then specify the time delay.
266 Managing Your Device
To increase or decrease the size of text on the screen
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Screen > Text Size tab.
3. Move the slider to increase or decrease the text size.
Device name
The device name is used to identify your device in the following situations:
•
Synchronizing with a computer
•
Connecting to a network
•
Restoring information from a backup
Note
If you synchronize multiple devices with the same computer, each device must have a
unique name.
To change the device name
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap About > Device ID tab.
3. Enter the device name.
Notes
• The device name must begin with a letter, consist of letters from A to Z, numbers
from 0 to 9, and cannot contain spaces. Use the underscore character to separate
words.
• If you enroll your device to your company’s domain, the device name will be
changed to be the same as the one used to enroll the device.
Ringer settings
To change the ring type and ring tone
1. Press the TALK/SEND button to open the Phone screen and then tap Menu >
Options.
2. On the Phone tab, select the desired Ring type and Ring tone from the
provided lists and then tap OK.
Managing Your Device 267
Tips
• You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you
downloaded from the Internet or copied from your computer as ring tones. To
quickly set the music file as a ring tone, tap and hold the music file and then select
Set As Ringtone. For a complete list of supported audio file formats for ring tones,
see "Specifications" in the Appendix.
• To use your sound files as ring tones, copy them first to the /My Documents/My
Ringtones folder on your device, then select the sound from the Ring tone list of
your device. For more information about copying files, see “Copying and Managing
Files” in this chapter.
Alarms and notifications
To set an alarm
1. On the Home screen Home tab, tap the time display and then tap the Alarms
tab.
2. Tap  and enter a name for the alarm.
3. Tap the day of the week for the alarm. Select multiple days by tapping each
desired day. Tap again to deselect the day.
4. Tap the time to open a clock and set the time for the alarm.
Tip
You can drag the hour and minute hands of the clock to set the time.
5. Tap the alarm icon (
) to specify the type of alarm you want. You can
choose a flashing light, a single sound, a repeating sound, or vibration.
6. If you choose to play a sound, tap the list next to the Play sound check box
and tap the sound you want.
To choose how to be notified about events or actions
1. On the Home screen, slide to the Settings tab and then tap Sounds >
Advanced.
2. On the Sounds tab, choose how you want to be notified by selecting the
appropriate check boxes.
268 Managing Your Device
3. On the Notifications tab, in Event, tap an event name and choose how you
want to be notified by selecting the appropriate check boxes. You can choose
from several options, such as a special sound, a message, a flashing light, or
vibrate.
Tip
Turning off sounds and flashing light notifications helps conserve battery power.
Phone services
Your device can directly link to the mobile phone network, and enable you to
access and change the settings of various phone services for your device. Phone
services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact
your wireless service provider to find out about the availability of phone services for
your device.
To access and change settings of phone services
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > Services tab.
3. Select the service you want to use, then tap Get Settings.
4. Choose your desired options, then tap OK.
For more information about customizing settings of phone services, see Help on
your device.
Managing Your Device 269
13.4 Using Connection Setup
Connection Setup configures your device’s data connections, such as GPRS, WAP,
and MMS, for you so that you do not need to enter the settings manually onto your
device. All you need to do is to select your network operator, then Connection
Setup does all the configuration for you.
To automatically configure the device’s data connections
The first time you power on your device, or when you insert a new SIM card and
then power on your device, Connection Setup will display a notification message to
inform you that it will automatically configure your device’s connection settings.
1. Tap Yes on the notification message.
Note
If your SIM card supports multiple network operator profiles, the next message
that appears will display network profile choices. Select the profile you want to
use and tap OK.
2. When prompted to automatically configure your device to the proper
network settings, tap Yes.
Connection Setup configures your device’s data connection settings.
3. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator to use for data connections
You can also manually select your network operator from Connection Setup’s
settings screen. Connection Setup will then reconfigure your device’s data
connections settings based on the operator that you selected.
270 Managing Your Device
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connection Setup.
3. Select the network Country and Operator you want to use, then tap OK.
Note
If you choose a Country and/or Operator that is different from the installed SIM
card network operator, you may not be able to access network services.
4. When prompted to confirm whether you want to configure the data
connection settings based on the selected network, tap Yes.
Connection Setup configures the data connection settings.
5. After the Connection Setup completes the configuration, tap Restart.
13.5 Using Task Manager
Task Manager lets you view and stop running programs, configure the
and enable the Quick Menu on the Home screen.
button,
To open Task Manager
• Tap the Quick Menu button on the top right corner of the Home screen to
open the Quick Menu, then tap ; or
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Task Manager.
To switch back to a running program
• Tap the program name in the Quick Menu; or
•
On the Task Manager screen, tap and hold the program name on the
Running tab, then tap Activate.
To configure the Exit (
) button
You can configure the Exit button to shut down running programs when the
button is tapped, or to just temporarily close the program screen but keep the
program running.
Managing Your Device 271
1. On the Task Manager screen, tap the Button tab.
2. Select the Enable the “X” button to end running programs check box.
Note
When the Enable the “X” button to end running programs check box is not
selected, tapping the Exit button will only close a program screen. The program
is not ended and continues to run in the background.
3. Choose the action for shutting down programs (by tapping the
by tapping and holding the
button).
button, or
4. Tap OK.
To close running programs from the Task Manager
1. On the Task Manager screen, tap the Running tab.
2. Do one of the following:
Tip
•
Select the check box of the programs that you want to close, then tap
Stop Selected.
•
Tap Stop All to close all programs in the list.
•
Tap Menu > Stop All but Selected to close all programs except those
which check boxes are selected.
You can also close running programs from the Quick Menu on the Home screen. See
“Quick Menu” in Chapter 1 for details.
To add a running program to the exclusive list
If you add a running program to the Exclusive Programs List, it will not be closed
when you tap Stop Selected or Stop All and will not be listed in the Quick Menu
on the Home Screen.
1. On the Task Manager screen, tap the Running tab.
2. Tap and hold the program name, then tap Add Exclusive.
Tip
To remove a program from the exclusive list, tap the Exclusive tab, select the check
box of the program, then tap Remove.
272 Managing Your Device
To set the sorting preference and program icon size in the Quick Menu
1. On the Task Manager screen, tap the Others tab.
2. In Sort programs in Quick Menu by, choose whether to sort according to
Program name or Memory usage. The list will be sorted in ascending order.
3. In Program icon size in Quick Menu, choose whether to use Small size or
Large size.
13.6 Protecting Your Device
Protect your SIM card with a PIN
You can protect your SIM card from unauthorized use by assigning a PIN (personal
identification number). The default SIM card PIN is provided by your wireless service
provider.
To enable the SIM card PIN
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > PIN/PIN2 tab.
3. Select the Require PIN when phone is used check box.
4. Enter the PIN number and then tap OK. To change the PIN at any time, tap
Change PIN.
Tip
Emergency calls can be placed at any time, without requiring a PIN.
Protect your device with a password
You can help keep your data more secure by requiring a password every time the
device is turned on.
To set a device password
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Lock.
Managing Your Device 273
3. Select the Prompt if device unused for check box, then specify the idle time
before the device requires a password.
4. In the Password type box, select the type of password you would like to use.
Tip
If your device is configured to connect to a network, use an alphanumeric
password for increased security.
5. Enter the password in both the Password and Confirm boxes.
6. Tap OK. The next time the device is turned on, you will be prompted to enter
your password.
Notes
• To ensure that you can always make emergency calls, do not begin your password
with the digits of your local emergency number.
• If you entered a hint, the hint will be displayed after the wrong password is entered
five times.
• Each time a wrong password is entered, the device response time gets longer until
the device appears to be not responding.
• If you forget your password, you can hard reset or clear the device memory. Before
you do this, make sure you back up your data and files so that you can restore
them back to your device. For more information about hard resetting the device
and clearing the memory, see “Resetting Your Device” in this chapter.
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage card.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Encryption.
3. Select Encrypt files when placed on a storage card.
Notes
• Encrypted files can only be read on the device that encrypted them.
• Encrypted files are opened just like other files, provided you are using the device
that encrypted them. There is no separate step for you to take to read these files.
274 Managing Your Device
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
13.7 Managing Memory
To see how much memory is available for use
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Main tab. The amount of memory
allocated to data storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see the available space of the storage card
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Storage Card tab.
If your device is running low on memory, try the following to free memory on your
device:
•
Close programs which are not in use.
•
Install a storage card and then move files and e-mail attachments to the
storage card.
•
Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold
the file, and tap Delete.
•
Delete large files. To find large files on your device, tap Start > Programs >
Search. In the Type list, tap Larger than 64 KB, and tap Search.
•
In Opera Mobile or Internet Explorer Mobile, delete temporary Internet files
and clear history information.
Managing Your Device 275
•
Remove programs you no longer use.
•
Reset your device.
13.8 Resetting Your Device
Soft reset
Occasionally, you may need to reset your device. A soft (or normal) reset of your
device clears all active program memory and shuts down all active programs. This
can be useful when your device is running slower than normal, or a program is not
performing properly. A soft reset is also necessary after the installation of some
programs. If a soft reset is performed when programs are running, unsaved work
will be lost.
To perform a soft reset
1. Remove the back cover.
(See “To remove the back cover”
in Chapter 1 for instructions.)
RESET
2. Pull out the stylus, and use the
stylus tip to press the RESET
button located near the battery
compartment.
Your device then restarts and displays
the Home screen.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should
only be performed if a normal reset does not solve a system problem. After a
hard reset, the device is restored to its default settings—the way it was when you
first purchased it and turned it on. Any programs you installed, data you entered,
276 Managing Your Device
and settings you customized on your device will be lost. Only Windows Mobile®
software and other pre-installed programs will remain.
Warning!
Your device will be set back to factory default settings. Make sure that any
additional installed programs and/or user data have been backed up before you
perform a hard reset.
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
To perform a hard reset
1. Remove the back cover and then pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER
buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press Volume Up to restore
manufacturer default, or
press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP
button to perform the hard reset, or press any other button to cancel the
reset.
Managing Your Device 277
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
13.9 Windows Update
You can update Windows Mobile® on your device with the latest updates, security
patches or fixes, if these are available.
To set up Windows Update
The first time you run Windows Update, you need to set up how you want Windows
Update to check for patches on the Microsoft web site.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. On the Update Setup screen, tap Next.
4. Choose how you want to check for updates, Manual or Automatic, then tap
Next.
Note
If you select Automatic, you will be asked if you want to use your current data
plan to check for updates. Select or clear the Use my data plan to check for and
download updates check box and tap Next.
5. Tap Finish.
To check for updates
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. Tap Check Now.
278 Managing Your Device
Note
Windows Mobile® updates may not be available at all times. Check the Windows
Mobile® web site for update information.
To change Windows Update options
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. Tap Menu and select the option you want to
change.
•
Tap Connections to change how the
device connects to the Internet when
checking for updates.
•
Tap Change Schedule to change how
Windows Update checks for Windows
Mobile® updates.
Managing Your Device 279
13.10 Battery Saving Tips
How long your battery power lasts depends on the battery type and how you use
your device. Try the following to help conserve battery life:
•
When the device is not in use, press POWER to switch off the display.
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Advanced tab of the Power settings screen.
Here, you can specify the time before your device automatically turns off the
display and backlight to conserve battery power. For optimum conservation,
specify 3 minutes or less.
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Backlight tab. Clear the Auto adjust backlight
check box to be able to adjust the backlight brightness settings.
•
Use the AC adapter to plug your device into an external power outlet
whenever possible, especially when using a storage card or when using a
modem or other peripherals.
•
Turn Bluetooth off when you are not using it. Make your device visible to
other devices only when you are trying to establish a Bluetooth partnership.
For more information about Bluetooth, see Chapter 9.
•
On the Home screen, slide to the Settings tab and then tap
Communications. On the Comm Manager screen, turn off Wi-Fi or your
active data connection when not in use.
•
Tap Start > Settings > Connections tab > Wi-Fi and then tap Menu >
Advanced. From the Turn off Wi-Fi if not connected in list, select a timeout
period so that Wi-Fi can be automatically turned off when your device is not
connected to any wireless network for some time.
280 Managing Your Device
•
Lower the volume.
•
Close battery-intensive programs, such as the Camera, when you are done
using them. Make sure the programs are ended and are not continuously
running in the background. Refer to “Using Task Manager” in this chapter for
information on closing programs.
Appendix
A.1 Specifications
A.2 Regulatory Notices
282 Appendix
A.1 Specifications
System Information
Processor
Qualcomm® MSM7225™ 528 MHz
Memory
• ROM : 256 MB
• RAM : 192 MB DDR
Note: Figures are the total ROM and RAM memory available for use and
storage. Since the memory is shared by the operating system, applications,
and data, the actual available memory is less than what is specified.
Operating System
Windows Mobile® 6.1 Professional
Power
Battery
Rechargeable Lithium-ion or Lithium-ion polymer battery,
1100 mAh
Battery Life
(estimates)
Standby time:
WCDMA: Up to 450 hours
GSM: Up to 365 hours
Talk time:
WCDMA: Up to 360 minutes
GSM: Up to 400 minutes
Media playback Up to 9.1 hours (WMV)
time:
Up to 20 hours (WMA)
(The above are subject to network and phone usage.)
AC Adapter
Voltage range/frequency: 100 - 240V AC, 50/60 Hz
DC output: 5V and 1A
Communications
Network
HSPA/WCDMA:
• 900/2100 MHz
• Up to 384 Kbps up-link and 7.2 Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
• 850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
Internal Antenna
Yes
Appendix 283
Physical
Dimensions
102 mm (L) X 53.5 mm (W) X 14.5 mm (T)
Weight
96 g (with battery)
Display
LCD Type
2.8-inch TFT-LCD flat touch-sensitive screen
Resolution
320 x 240 QVGA resolution
Camera Module
Type
3.2 megapixel CMOS color camera with fixed focus
Resolution
• Photo: 3M (2048 x 1536)
	2M (1600 x 1200)
1M (1280 x 960)
VGA (640 x 480)
QVGA (320 x 240)
• Video: CIF (352 x 288)
QVGA (320 x 240)
QCIF (176 x 144)
Sub-QCIF (128 x 96)
Digital Zoom
Up to 4X
Connections
I/O Port
HTC ExtUSB™
• 11-pin mini-USB and audio jack in one
• USB 2.0 high speed
Wireless
Connections
• Bluetooth® 2.0 with EDR
• Wi-Fi® (IEEE 802.11 b/g)
284 Appendix
Audio
Microphone/
Speaker
Built-in
Ring tone
• Supports eAAC+, AAC+, AAC, AMR-NB, AMR-WB, QCP, MIDI, MP3,
MPEG4-Audio, WMA, WAV formats
• 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI
Supported
Playback Formats
• Windows Media® Player: MP3, MPEG-4, AAC, AAC+, eAAC+,
WMA, WAV, AMR, AMR‑NB, AMR-WB, AWB, SP-MIDI
Controls
Device Control
•
•
•
•
•
TouchFLO™
Phone buttons: TALK/SEND and END
POWER button
VOLUME CONTROL button
RESET button
Expansion Slot
Card Slot
microSD™ (SD 2.0 compatible)
Others
Special Features
• GPS and A-GPS ready
• (GPS navigation software not included)
Appendix 285
A.2 Regulatory Notices
Regulatory Agency Identifications
For regulatory identification purposes, your product is assigned a model number of
JADE100.
To ensure continued reliable and safe operation of your device, use only the
accessories listed below with your JADE100.
The Battery Pack has been assigned a model number of JADE160.
Note
This product is intended for use with a certified Class 2 Limited Power Source, rated 5
Volts DC, maximum 1 Amp power supply unit.
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harm-ful interference to radio or TV reception, which can be determined by turning
the equipment on and off, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
286 Appendix
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made
to the device that are not expressly approved by High Tech Computer Corporation
may void the user’s authority to operate the equipment.
Body-worn operation
This device was tested for typical body-worn operations with the back of the
phone kept 1.5cm from the body. To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar accessories that maintain a
1.5cm separation distance between the user’s body and the back of the phone,
including the antenna. The use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF exposure requirements,
and should be avoided.
Safety Precautions for RF Exposure
Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
FCC RF Radiation Exposure Statement
•
This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth / QDID:B014495 and WLAN / CID:WFA6450.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
•
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
Appendix 287
Exposure to Radio Frequency (RF) Signals
Your device contains a radio transmitter and receiver. The radiated output power
is far below the international radio frequency exposure limits. These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set
by international standards bodies:
•
•
•
•
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report
86. 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The standard incorporates a
substantial margin of safety to give additional protection for the public and to
account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Your device has an internal antenna. Use only the supplied integral antenna. Use of
unauthorized or modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the recommended limits as
well as result in non-compliance with local regulatory requirements in your country.
To assure optimal phone performance and ensure human exposure to RF energy
is within the guidelines set forth in the relevant standards; always use your
device only in its normal-use position. Do not touch or hold the antenna area
unnecessarily when placing or receiving a phone call. Contact with the antenna
288 Appendix
area may impair call quality and cause your device to operate at a higher power
level than needed. Avoiding contact with the antenna area when the phone is IN
USE optimizes the antenna performance and the battery life.
Tests for SAR are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operation can be well
below the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (for example, at the ear and worn on the body) as required
by the FCC for each model. (Bodyworn measurements may differ among phone
models, depending upon available accessories and FCC requirements). For body
worn operation, to maintain compliance with FCC RF exposure guidelines, use
only original manufacturer approved accessories. When carrying the phone while
it is on, use the specific original manufacturer supplied or approved carrying case,
holster, or other body-worn accessory
SAR Information
1.33 W/kg @ 1g
Telecommunications & Internet Association (TIA)
Safety Information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
Appendix 289
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
•
•
Should ALWAYS keep the phone more than six inches from their pacemaker
when the phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference. If you have any reason to suspect that interference is taking
place, turn the phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 13th February 2003, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and
in addition, to promote the reuse, recycling and other forms of recovery of such
wastes so as to reduce disposal.
290 Appendix
The WEEE logo (shown at the left) on the product or on its box indicates
that this product must not be disposed of or dumped with your other
household waste. You are liable to dispose of all your electronic or
electrical waste equipment by relocating over to the specified collection
point for recycling of such hazardous waste. Isolated collection and
proper recovery of your electronic and electrical waste equipment at
the time of disposal will allow us to help conserving natural resources.
Moreover, proper recycling of the electronic and electrical waste
equipment will ensure safety of human health and environment. For
more information about electronic and electrical waste equipment
disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you
purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and its
amendments.
Index
A2DP 178
ActiveSync
- ActiveSync mode 47
- set up 100
- synchronize with computer 101
- synchronize with Exchange Server 130
Add and remove programs 226
Adobe Reader LE 227
Airplane Mode 60, 236
Alarm 267
Album
- about 205
- close Album 210
- play back video 210
- select a photo or video to view 206
- view an image 206
Answering calls 54
Attachment
- add to e-mail 123
- download 125
- set IMAP4 to automatically receive
attachments 127
- set Outlook to automatically receive
attachments 127
Audio Booster 222
Audio Manager 217
Back cover
- remove 28
Backlight
- adjust brightness 265
- set backlight timeout 265
Back up data 247
Basic settings 264
Battery
- battery information 30
- charge battery 33
- install 31
- remove 31
- save battery power 145, 279
Beam via Bluetooth 179
Block Recognizer 91
Bluetooth
- about 176
- Bluetooth Explorer 181
- Bluetooth file sharing 181
- Bluetooth shared folder 181
- hands-free headset 178
- modem 166
- modes 176
- partnership (pairing) 177
- printing 182
- SIM Access Profile (SAP) 61
- stereo headset 178
292  Index
- synchronize 103
- turn on and off 236
- visible 176
Calendar
- create appointment 228
- send appointment 231
- view appointment 230
Call History 59
Calling
- from Contacts 53
- from Home screen 53
- from Phone screen 51
Camera
- about 194
- Advanced Options 202
- capture modes 194
- capture photos and videos 196
- file formats 195
- icons 196
- Menu Panel 198
- resolution 198
- specifications 283
- zooming 199
Capture photos and videos 196
Car kit phones 61
Clear Storage 277
Clock & Alarms 261, 264, 267
Comm Manager 236, 263
Compact QWERTY 86
Company Directory 138
Conference call 57
Configure data connection settings 35, 146,
269
Connect device to Internet
- Dial-up 147
- GPRS/3G 146
- start a connection 148
- ways of connecting 142
- Wi-Fi 142
Connection Setup 35, 41, 269
Contacts 232
Contacts Picture capture mode 195
Copy
- contacts to SIM card 242
- copy and manage files 258
- media files from PC to device 213
- SIM contacts to device 242
Data connection 146, 148, 237
Device name 266
Dial-up 147
Dimensions and weight 283
Direct Push 132, 237
Disk Drive mode 47
Download
- download complete e-mail 124
- e-mail download settings 120, 126
- file attachments 125
- Java applications 240
- satellite data 190
- synchronize e-mails 126
- web feeds 168
Draw 238
Index 293
E-mail
- Internet e-mail account (POP3/
IMAP4) 118
- mail server settings 119
- Mail tab (Home screen) 70
- send 123
- settings (POP3/IMAP4) 120
- setup wizard 118
- synchronize 96, 126, 130
- types of e-mail accounts 116
EDGE 146
Emergency call 53
Emoticon
- MMS 114
- Windows Live Messenger 163
Ending calls 54
Equalizer 222
Excel Mobile 237
Exchange Server 130
Favorite contacts 67
File Explorer 258
Find contact
- Company Directory 138
- on device 234
Finger gestures 81
Finger panning 82
Finger scrolling 81
Forward e-mail 125
Full QWERTY 85
Google Maps 77, 186
GPRS 146
GPRS Monitor 244
GPS 188, 190
Hard reset 275, 276
Home screen 39, 64
Home tab (Home screen) 66
IMAP4 118
Input methods
- Block Recognizer 91
- Compact QWERTY 86
- Full QWERTY 85
- Letter Recognizer 92
- Phone Keypad 87
- Transcriber 92
Input Panel 84
Input Selector arrow 84
International call 54
Internet 142
Internet e-mail 118
Internet Sharing 165
Internet tab (Home screen) 71
Java
- create folders 241
- install MIDlets/MIDlet suites from
device 240
294 Index
- install MIDlets/MIDlet suites from
Internet 240
- manage MIDlets/MIDlet suites 241
- uninstall MIDlets 241
- update a MIDlet/MIDlet suite 241
Key Lock 261
Letter Recognizer 92
Library
- Audio Manager 217
- Music tab (Home screen) 74
- Windows Media Player Mobile 212
Live Messenger 162
Mail tab (Home screen) 70
Making calls 51
Maps Search tab (Home screen) 77
Meeting request 136, 231
Memory 45, 274, 282
Messages tab (Home screen) 69
Messaging
- about 106
- e-mail 116, 118, 122
- multimedia (MMS) 111
- text (SMS) 107
Messenger 162
microSD card
- install 32
Microsoft Office Mobile 237
MIDlet/MIDlet suite 240
MMS
- about 111
- add audio clip 114
- add photo/video 113
- add text 114
- blacklist 116
- create MMS message 112
- MMS settings 111
- reply message 115
- view message 115
MMS Video capture mode 195
Modem
- Bluetooth 166
- USB 165
Multimedia 111, 193
Multitap 88
Music tab (Home screen) 73
News channels (web feeds) 168
Notes 238
Numeric and Symbol Mode 90
Office Mobile 237
OneNote Mobile 237
Open PDF file 227
Opera Mobile 149
Panorama capture mode 195
Password 272
Index 295
People tab (Home screen) 67
Phone 50
Phone Keypad 87
Phone services 268
Photo capture mode 195
Photos and Videos tab (Home screen) 71
Picture Theme capture mode 195
PIN 50, 272
Playlists
- Audio Manager 219
- Windows Media Player Mobile 216
Play media 215
Play music
- Audio Manager 217
- Music tab (Home screen) 73
- Windows Media Player Mobile 215
Podcasts 173
POP3  118
PowerPoint Mobile 237
Profile 78
Programs 226
Programs tab (Home screen) 80
Put call on hold 56
QuickGPS 190
Quick menu 45, 270
Record
- voice note 239
- voice recording 251
Regional Settings 262, 265
Regulatory notices 285
Reply
- e-mail 125
- MMS 115
- text (SMS) 69, 109
Reset
- clear storage 277
- hard reset 275
- soft reset 275
Resolution 198
Review screen (Camera) 201
Ring tone 220, 266
Ring type 266
RSS Hub
- about 168
- headline list 171
- news channels 168
- podcasts 173
- summary view 172
Safety information 5
Screen text size 266
Send
- e-mail 123
- MMS message 112
- text message (SMS) 107
Set music as ring tone 220
Settings (Connections tab)
- Advanced Network 263
- Beam 263
- Bluetooth 263
- Connections 146, 147, 263
296  Index
- Connection Setup 263, 269
- Domain Enroll 263
- USB to PC 103, 263
- Wi-Fi 145, 264
- Wireless LAN 144, 264
Settings (Personal tab)
- Buttons 259
- Input 259
- Lock 259, 272
- Menus 260
- Owner Information 260
- Phone 260, 266, 268
- Sounds & Notifications 260, 267
- Today 260
- Voice Speed Dial 254, 260
Settings (System tab)
- About 260, 266
- Certificates 260
- Clear Storage 261, 277
- Clock & Alarms 261, 264, 267
- Customer Feedback 261
- Device Information 261
- Encryption 261, 273
- Error Reporting 261
- External GPS 261
- Managed Programs 261
- Memory 261
- Microphone AGC 262
- Power 262
- Regional Settings 262, 265
- Remove Programs 227, 262
- Screen 262, 266
- Task Manager 262, 270
- TouchFLO 44, 82, 262
- Windows Update 262, 277
Settings tab (Connections)
- Comm Manager 263
Settings tab (Home screen) 78
Settings tab (System)
- Key Lock 261
SIM Access Profile (SAP) 61
SIM card
- install 28
- PIN 272
- remove 29
SIM Manager
- about 242
- copy contacts to SIM card 242
- copy SIM contacts to device 242
- create SIM contact 242
Sleep mode 36
Smart Dial 51
SMS 69, 107, 123
Soft reset 275
Sounds & Notifications 260, 267
Sound settings 78
Spb GPRS Monitor 244
Speakerphone 57
Specifications 282
Speed Dial 59
Sprite Backup 247
Start menu 44
Status icons 40
Storage card
- encrypt 273
- install 32
Strap holder 34
Streaming Media 158
Index 297
Swap/switch calls 56
Synchronize
- ActiveSync 101
- change information types 102
- music and videos 104
- via Bluetooth 103
- Windows Media Player 213
- Windows Mobile Device Center 97
- with computer 78, 101
- with Exchange Server 78, 130
T9 88
Task Manager 262, 270
Tasks 250
Text messages
- copy from SIM card 110
- copy to SIM card 109
- create new message 107
- Messages tab (Home screen) 69
- send 108
Text size (screen) 266
TouchFLO 63, 262
Transcriber 92
Troubleshoot
- sync connection 103
- Windows Media Player Mobile 216
Turn device on and off 35
Turn phone function on and off 60, 236
USB modem 165
USB to PC 103, 263
Vibrate 43, 46, 53, 267
Video capture mode 195
Voice call 51
Voicemail 54
Voice Recorder 251
Voice Speed Dial
- about 253, 260
- create
- voice tag for phone number 253
- voice tag for program 254
- make call or launch program 254
Voice tag
- create
- for phone number 253
- for program 254
- make call or launch program 254
Weather tab (Home screen) 75
Wi-Fi 142, 237
Windows Live 160
Windows Live Messenger 162
Windows Media Player Mobile
- file formats 211
- menus 212
- playlists 216
- troubleshoot 216
Windows Mobile Device Center 97
Windows Update 262, 277
Word Mobile 237
298 Index
YouTube 153
ZIP
- about 255
- create archive 255
- open zip file and extract files 255
Zooming
- Camera 199
- finger gestures 82
- Opera Mobile 151

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2008:09:16 15:19:44+08:00
Create Date                     : 2008:09:16 15:19:34+08:00
Creator                         : Adobe InDesign CS2 (4.0)
Producer                        : Adobe PDF Library 7.0
Page Count                      : 143
Mod Date                        : 2008:09:16 15:19:44+08:00
Creation Date                   : 2008:09:16 15:19:34+08:00
Metadata Date                   : 2008:09:16 15:19:44+08:00

EXIF Metadata provided by EXIF.tools