HTC PG09410 LTE BAND 4/17 TABLET COMPUTER User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1503032
Application ID	sIG5FA1l/dsUQH2uPYIIKg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.65kB (183071 bits)
Date Submitted	2011-07-18 00:00:00
Date Available	2011-12-30 00:00:00
Creation Date	2011-06-24 10:00:10
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2011-07-18 11:25:27
Document Title	Users Manual 2
Document Creator	Adobe InDesign CS2 (4.0.5)

Safety and
regulatory guide

Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR
ATTEMPT TO DISASSEMBLE THE DEVICE.
Disclaimers
ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR
DOCUMENTATION (“ACCESSED INFORMATION”) ARE PROVIDED
“AS IS” AND WITHOUT ANY WARRANTY OR ANY TECHNICAL
SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, HTC AND ITS AFFILIATES expressly disclaim
any and all representations and warranties, arising by law or
otherwise, related to the Accessed Information, including without
limitation any express or implied representation or warranty of
merchantability, fitness for a particular purpose, non-infringement,
quality, accuracy, completeness, effectiveness, reliability, or
usefulness. Without limiting the foregoing, it is further understood
that HTC and its Affiliates are not responsible for any use of the
Accessed Information or the results arising from such use, and
that you use such information at your own risk.
Limitation of damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO EVENT SHALL HTC OR ITS AFFILIATES BE LIABLE TO YOU,
ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF
ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE,
INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE,
LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY,
LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS
OF THE FORESEEABILITY THEREOF OR WHETHER HTC OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL
LIABILITY OF HTC OR ITS AFFILIATES EXCEED THE AMOUNT
RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY
UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE
FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS
WHICH MAY NOT BE DISCLAIMED.
Safety and regulatory guide
Important health information and safety
precautions
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage
to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting
with desktop or notebook computer. Be sure your computer is
properly grounded (earthed) before connecting this product to
the computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.
Safety precautions for power supply unit
 Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.
 Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack
is handled improperly. Do not attempt to open or service
the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or

Safety and regulatory guide
expose a battery pack to temperatures higher than 140˚F
(60˚C) .
	WARNING: Danger of explosion if battery is incorrectly
replaced. To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external contacts,
expose to temperature above 140˚F (60˚C), or dispose
of in fire or water. Recycle or dispose of used batteries
according to the local regulations or reference guide
supplied with your product.
 Take extra precautions
• Keep the device dry and away from water or any liquid as it
may cause a short circuit.
• The device should only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
• Only use the battery with a charging system that has been
qualified with the system per this standard, IEEE-Std-17252006. Use of an unqualified battery or charger may present a
risk of fire, explosion, leakage or other hazard.
• Avoid dropping the device. If the device is dropped, especially
on a hard surface, and the user suspects damage, take it to a
service center for inspection.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with
skin or clothing. If already in contact, flush the affected
area immediately with clean water and seek medical
advice.
• Do not allow the leaking fluid to come in contact with
eyes. If already in contact, DO NOT rub; rinse with clean
water immediately and seek medical advice.
• Take extra precautions to keep a leaking battery away
from fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in
places where the temperature may exceed 140˚F (60˚C), such as
on a car dashboard, window sill, or behind a glass that is exposed
to direct sunlight or strong ultraviolet light for extended periods of
Safety and regulatory guide
time. This may damage the product, overheat the battery, or pose
a risk to the vehicle.
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of
time.
Safety in aircraft
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s wireless communications function on board
an airplane is against the law in most countries. If you want to
use this device when on board an aircraft, remember to turn off
the device’s wireless communications function by switching to
Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury
or even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment
in fuel depots, chemical plants, or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below
deck on boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain,
dust, or metal powders.

Safety and regulatory guide
Road safety
Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using a device while driving
(even with a hands free kit) causes distraction and can lead to
an accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.
Safety precautions for RF exposure
 Avoid using your device near metal structures (for example,
the steel frame of a building).
 Avoid using your device near strong electromagnetic
sources, such as microwave ovens, sound speakers, TV and
radio.
 Use only original manufacturer-approved accessories, or
accessories that do not contain any metal.
 Use of non-original manufacturer-approved accessories may
violate your local RF exposure guidelines and should be
avoided.
Interference with medical equipment functions
This product may cause medical equipment to malfunction. The
use of this device is forbidden in most hospitals and medical
clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your device OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
Nonionizing radiation
Your device has an internal antenna. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. As with other
mobile radio transmitting equipment, users are advised that for
Safety and regulatory guide
satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or
modified antennas may impair transmission quality and damage
the device, causing loss of performance and SAR levels exceeding
the recommended limits as well as result in non-compliance with
local regulatory requirements in your country.
To assure optimal device
performance and ensure human
exposure to RF energy is within
the guidelines set forth in the
relevant standards, always use
your device only in its normal-use
position. Contact with the antenna
area may impair transmission
quality and cause your device to
operate at a higher power level
than needed. Avoiding contact
with the antenna area when the
device is IN USE optimizes the
antenna performance and the
battery life.
Antenna location
Electrical safety
 Accessories
• Use only approved accessories.
• Do not connect with incompatible products or accessories.
• Take care not to touch or allow metal objects, such as coins or
key rings, to contact or short-circuit the battery terminals.
 Connection to a car
Seek professional advice when connecting a device interface to
the vehicle electrical system.
 Faulty and damaged products
• Do not attempt to disassemble the device or its accessory.
• Only qualified personnel must service or repair the device or
its accessory.
General precautions
You alone are responsible for how you use your device and any
consequences of its use. You must always switch off your device
wherever the use of a device is prohibited. Use of your device is

Safety and regulatory guide
subject to safety measures designed to protect users and their
environment.
 Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your pants’
pocket before sitting down. It is also recommended that you
store the device in a protective case and only use the tablet pen
or your finger when interacting with the touch screen. Cracked
display screens due to improper handling are not covered by
the warranty.
 Device getting warm after prolonged use
When using your device for prolonged periods of time, such
as when you’re charging the battery or browsing the Web,
the device may become warm. In most cases, this condition is
normal and therefore should not be interpreted as a problem
with the device.
 Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorized service technician or provider.
 Protect your device
• Always treat your device and its accessories with care and
keep them in a clean and dust-free place.
• Do not expose your device or its accessories to open flames
or lit tobacco products.
• Do not expose your device or its accessories to liquid,
moisture or high humidity.
• Do not drop, throw or try to bend your device or its
accessories.
• Do not use harsh chemicals, cleaning solvents, or aerosols to
clean the device or its accessories.
• Do not paint your device or its accessories.
• Do not attempt to disassemble your device or its accessories,
only authorised personnel must do so.
• Do not expose your device or its accessories to extreme
temperatures, minimum -4°F (-20°C) and maximum 122°F
(50°C).
• Please check local regulations for disposal of electronic
products.
• Do not carry your device in your back pocket as it could break
when you sit down.
Safety and regulatory guide
 Damage requiring service
Unplug the product from the electrical outlet and refer servicing
to an authorized service technician or provider under the
following conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
 Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
 Avoid wet areas
Never use the product in rain, or near washbasins or other wet
locations. If your product gets wet, do not try to dry the product
with the use of an oven or dryer, as this may damage your
product.
 Avoid using your device after a dramatic change in
temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the device,
allow sufficient time for the moisture to evaporate before using
the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from hightemperature conditions into a cooler environment,
allow the device to acclimate to room temperature
before turning on power.
 Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
 Air bags
Do not place a device in the area over an air bag or in the air
bag deployment area. Store the device safely before driving
your vehicle.
 Mounting accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
10







Safety and regulatory guide
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
Small children
Do not leave your device and its accessories within the reach
of small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the device.
Your device contains small parts with sharp edges that may
cause an injury or which could become detached and create a
choking hazard.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with
your device:
• Do not grip the device too tightly
• Press the buttons lightly
• Make use of the special features in the handset which minimise
the number of buttons which have to be pressed, such as
message templates and predictive text.
• Take lots of breaks to stretch and relax.
Operating machinery
Full attention must be given to operating the machinery in order
to reduce the risk of an accident.
 Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
 Loud noise
This device is capable of producing loud noises which may
damage your hearing.
Safety and regulatory guide
11
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of PG09410.
To ensure continued reliable and safe operation of your device, use
only the accessories listed below with your PG09410.
The Battery Pack has been assigned a model number of BG09100.
Operating temperature range: 32°F to 104°F (0°C to 40°C).
NOTE: This product is intended for use with a certified Class 2
Limited Power Source, rated 9 Volts DC, maximum 1.67
Amp power supply unit.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
 Consult the dealer or an experienced radio or television
technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
12
Safety and regulatory guide
Operation on the 5.15-5.25GHz frequency band is restricted to
indoor use only. The FCC requires indoor use for the 5.15-5.25GHz
band to reduce the potential for harmful interference to cochannel Mobile Satellite Systems. Therefore, it will only transmit
on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725–5.850 GHz band
when associated with an access point (AP).
Important Note
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure
compliance requirements, please follow operation instruction as
documented in this manual.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter, except the
transmitters built-in with the device.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
This Category II radiocommunication device complies with
Industry Canada Standard RSS-310.
Safety and regulatory guide
13
Ce dispositif de radiocommunication de catégorie II respecte la
norme CNR-310 d’Industrie Canada.
Important Note
IC Radiation Exposure Statement:
This EUT is compliance with SAR for general population/
uncontrolled exposure limits in IC RSS-102 and had been tested
in accordance with the measurement methods and procedures
specified in IEEE 1528.
 This equipment should be installed and
operated with minimum distance 0cm between the radiator &
your body.
This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
The County Code Selection feature is disabled for products
marketed in the US/Canada.
For product available in the USA/ Canada markets, only channel
1~11 can be operated. Selection of other channels is not possible.
SAR Information
1.41 W/kg @ 1g (BODY)
THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES. For tablet mode operation, this
device has been tested and meets the FCC RF exposure guidelines
when used with the HTC Corporation accessories supplied or
designated for this product. Use of other accessories may not
ensure compliance with the FCC RF exposure guidelines.
Your wireless mobile device is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on the safety standards previously set by both U.S. and
international standards bodies:
 American National Standards Institute (ANSI) IEEE. C95.11992.
 National Council on Radiation Protection and Measurement
(NCRP). Report 86. 1986.
 International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1996.
 Ministry of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure the
14
Safety and regulatory guide
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile device employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg*.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under the
Display Grant section of https://fjallfoss.fcc.gov/oetcf/eas/reports/
GenericSearch.cfm after searching on FCC ID: NM8PG09410.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
(CTIA) Web-site as http://www.phonefacts.net.
* In the U.S. and Canada, the SAR limit for mobile device used
by the public is 1.6 Watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in usage.
Normal condition only to ensure the radiative performance and
safety of the interference. As with other mobile radio transmitting
equipment, users are advised that for satisfactory operation of the
equipment and for the safety of personnel, it is recommended that
no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Tablet Mode Operation
This device was tested for touching position with power reduction
and tested at 1cm air gap without power reduction. Third-party
book covers and similar accessories used by this device should
not contain any metallic components. Such accessories that do
not meet these requirements may not comply with RF exposure
requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair transmission
quality, damage the device, or result in violation of regulations. Do
not use the device with a damaged antenna. If a damaged antenna
comes into contact with the skin, a minor burn may result. Please
contact your local dealer for replacement antenna.
Safety and regulatory guide
15
Telecommunications & Internet Association (TIA)
safety information
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of 15 cm (6 inches) be maintained between
a handheld wireless device and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
 Should ALWAYS keep the device more than 15 cm (6 inches)
from their pacemaker when the device is turned ON.
 Should not carry the device in a breast pocket.
 Should use the ear opposite the pacemaker to minimize
the potential for interference. If you have any reason to
suspect that interference is taking place, turn the device OFF
immediately.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment
(WEEE), which entered into force as European law on 13th
February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of
WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
16
Safety and regulatory guide
The WEEE logo (shown at the left) on the product or on
its box indicates that this product must not be disposed
of or dumped with your other household waste. You are
liable to dispose of all your electronic or electrical waste
equipment by relocating over to the specified collection
point for recycling of such hazardous waste. Isolated
collection and proper recovery of your electronic and
electrical waste equipment at the time of disposal will
allow us to help conserving natural resources. Moreover,
proper recycling of the electronic and electrical waste
equipment will ensure safety of human health and
environment. For more information about electronic
and electrical waste equipment disposal, recovery, and
collection points, please contact your local city center,
household waste disposal service, shop from where
you purchased the equipment, or manufacturer of the
equipment.
RoHS compliance
This product is in compliance with Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003,
on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS) and its amendments.
Safety and regulatory guide
17
91H0xxxx-xxM Rev.A
htc.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Instance ID                     : uuid:030f44bc-1985-4586-8d38-78ffd8ac8f57
Document ID                     : adobe:docid:indd:379b9ffa-880a-11e0-bc71-aa269f774566
Rendition Class                 : proof:pdf
Derived From Instance ID        : 66f7f1cf-5c3d-11e0-9556-b62e7ea74f83
Derived From Document ID        : adobe:docid:indd:66f7f1cc-5c3d-11e0-9556-b62e7ea74f83
Manifest Link Form              : DirectStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, DirectStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:99562B885DA6DE11B678BFE879A7513B, uuid:AE8A5BF4ED06DE11BDF4FCF4B7A64086, uuid:3148D70EEF06DE11BDF4FCF4B7A64086, uuid:a8397602-1297-11d9-af52-f9e736a7d090, uuid:6E376FC0ACB5DB11BC5AAA223DED57B8, uuid:9B562B885DA6DE11B678BFE879A7513B
Manifest Reference Document ID  : uuid:98562B885DA6DE11B678BFE879A7513B, uuid:AD8A5BF4ED06DE11BDF4FCF4B7A64086, uuid:2F48D70EEF06DE11BDF4FCF4B7A64086, adobe:docid:photoshop:a8397601-1297-11d9-af52-f9e736a7d090, uuid:92D758644784DB11ADE2B6B6F6638208, adobe:docid:photoshop:212de8c0-e216-11d9-9410-d59aa69dcc0b, uuid:73183C548655DE11BC7FD552889818B8
Create Date                     : 2011:06:24 10:00:10+08:00
Modify Date                     : 2011:07:18 11:25:27-04:00
Metadata Date                   : 2011:07:18 11:25:27-04:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 2978 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 18
Creator                         : Adobe InDesign CS2 (4.0.5)

EXIF Metadata provided by EXIF.tools