Contents
- 1. User Manual 1 of 2
- 2. User Manual 2 of 2
- 3. Users Manual 1
- 4. Users Manual 2
Users Manual 1
Specifications
Receive operational
frequency 100KHz ~200KHz
Supply charging voltage 5V ± 0.2V to the battery
charging subsystem.
Charging current 500mA
Operating temperature
range -2°C to 60°C
Integrated charge
current 2.5W output
Applications
Smart phone Wireless
Power Applications for
product
FCC ID NM8PG32100
*This phone accessory features RX charging only.
Wireless Charging
Battery Cover (BRC 550)
Quick guide
Wireless charging for
your phone
The Wireless charging battery cover (BRC 550) for
Droid Incredible 2 lets you conveniently charge
your phone’s battery on a compatible wireless
charging mat (sold separately, please contact
your service provider or retail store for purchasing
details).
Note Avoid twisting or bending both your phone’s
original back cover and wireless charging
battery cover.
Removing the original back cover
from your phone
1. With the phone switched off, hold your phone
securely with the front facing down.
2. Starting from the small opening at the bottom
of the phone, lift the back cover and remove it
completely.
Connecting the wireless charging
battery cover to your phone
1. Align the wireless charging battery cover onto
the phone’s top panel.
2. Press all sides of the battery cover towards the
phone.
You’ll hear clicks when the small tabs underneath
the battery cover are locked in place.
Charging the battery
After you’ve installed the wireless charging battery
cover, you can start charging your phone using
a compatible wireless charging mat. Refer to the
device’s documentation for more details.
As the battery is being charged, the notification
LED shows a solid orange light. The light turns to
solid green when the battery is fully charged.
(Contact your service provider or retail store
for a list of supported accessories for wireless
charging.)
* BRC550 is compatible with charging mats operating in
100 KHz ~ 200 KHz sold in retail stores.