HTC WZ PDA Phone User Manual Wizard Generic Manual English indb
HTC Corporation PDA Phone Wizard Generic Manual English indb
HTC >
Contents
- 1. User Manual WIZA 100 110
- 2. User Manual WIZA 200
User Manual WIZA 100 110
Pocke User Manual Please Read Before Proceeding Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, ActiveSync, Excel, Internet Explorer, MSN, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. EXPLOSIVE ATMOSPHERES When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your Pocket PC Phone. Important Safety Precautions When using this product, the safety precautions below must be taken to offset possible legal liabilities and damages. ELECTRICAL SAFETY This product is intended for use when supplied with power from the battery. Other usage may be dangerous and will invalidate any approval given to this product. SAFETY IN AIRCRAFTS Due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this product on board an airplane is against the law in most countries. ENVIRONMENT RESTRICTIONS Do not use this product at gas or refueling stations. The use of this product is also prohibited in fuel storehouses, chemical plants, and locations containing explosives. SAFETY FOR ENVIRONMENTS Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using hand-free devices as an alternative is allowed. |3 INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. NONIONIZING RADIATION This product should be operated in the suggested normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Contents Chapter 1 Getting Started 1.1 Getting to Know your Device andits Accessories ........................................................ 10 1.2 Installing the SIM Card ................................................ 15 1.3 Battery Information ..................................................... 16 1.4 Starting Up ................................................................... 18 1.5 The Today Screen ........................................................ 20 1.6 Indicators ..................................................................... 21 1.7 Using the Start Menu................................................... 25 Chapter 2 Entering and Searching Information 27 2.1 Introduction.................................................................. 28 2.2 Using the Hardware Keyboard ................................... 28 2.3 Using the Standard On-Screen Keyboard ................. 29 2.4 Using Letter Recognizer ............................................. 29 2.5 Using Block Recognizer ............................................. 30 2.6 Using Transcriber ........................................................ 30 2.7 Using Phone Pad ......................................................... 34 2.8 Drawing and Writing on the Screen ........................... 37 |5 2.9 Recording a Note ......................................................... 40 2.10 Searching Information ................................................. 41 Chapter 3 Using Phone Features 43 3.1 Using the Phone .......................................................... 44 3.2 Making a Voice Call ..................................................... 46 3.3 Receiving a Voice Call................................................. 48 3.4 Smart Dialing ............................................................... 49 3.5 In-call Options ............................................................. 52 3.6 Additional Dialing Information ................................... 53 Chapter 4 Synchronizing Your Pocket PC Phone 55 4.1 Using ActiveSync ........................................................ 56 4.2 Synchronizing Information ......................................... 57 4.3 Synchronizing via Infrared and Bluetooth ................ 60 4.4 Synchronizing Music, Video, and Pictures ............... 61 Chapter 5 Managing Your Pocket PC Phone 63 5.1 Personalizing Your Pocket PC Phone ....................... 64 5.2 Adding and Removing Programs............................... 73 5.3 Managing Memory ....................................................... 75 5.4 Backing Up Files ......................................................... 76 5.5 Protecting Your Device ............................................... 78 5.6 Resetting Your Pocket PC Phone .............................. 80 Chapter 6 Getting Connected 83 6.1 Connecting to the Internet .......................................... 84 6.2 Internet Explorer Mobile ............................................ 87 6.3 Using Bluetooth ........................................................... 90 6.4 Using Wireless Modem ............................................... 95 6.5 Using Wireless LAN Manager................................... 101 6.6 Using GPRS Monitor ................................................. 104 6.7 Using Terminal Services Client .................................110 Chapter 7 Exchanging Messages and Using Outlook 111 7.1 E-mail and Text Messages .........................................112 7.2 Using MMS Messages ................................................118 7.3 Pocket MSN Messenger ............................................ 125 7.4 Calendar ..................................................................... 127 7.5 Contacts ..................................................................... 129 7.6 Tasks........................................................................... 131 7.7 Notes .......................................................................... 133 |7 Chapter 8 Experiencing Multimedia 135 8.1 Using Camera ............................................................ 136 8.2 Using Pictures & Videos ........................................... 147 8.3 Using Windows Media Player ................................... 151 Chapter 9 Using Other Applications 159 9.1 Word Mobile ............................................................... 160 9.2 Excel Mobile ............................................................... 162 9.3 Viewing Slide Shows withPowerPoint Mobile ........ 164 9.4 Using ClearVue PDF .................................................. 166 9.5 Using MIDlet Manager ............................................... 167 9.6 Using ZIP .................................................................... 173 Appendix 179 A.1 Regulatory Notices .................................................... 180 A.2 Specifications ........................................................... 187 A.3 Index A ........................................................................ 189 Chapter 1 Getting Started 1.1 Getting to Know your Device and its Accessories 1.2 Installing the SIM Card 1.3 Battery Information 1.4 Starting Up 1.5 The Today Screen 1.6 Indicators 1.7 Using the Start Menu 1.1 Getting to Know your Device and its Accessories Front view 10 10 | Getting Started 1 Notification LED Bi-color LED on the right side: Green and Orange for GSM standby, SMS message, GSM network status, notification, battery charging status. Bi-color LED on the left side: Blue and green for Bluetooth system notification of powered-up and ready to transmit radio frequency signal, and Wi-Fi status. Speaker Listen to audio media or a phone call from here. Messaging Press for quick open your Messaging. Internet Explorer Press to launch Internet Explorer. Touch Screen Use to write, draw, or make a selection with the stylus. Left Softkey Performs the command shown in the label above the button. Right Softkey Performs the command shown in the label above the button. Talk Press to answer an incoming call or dial a number. End Press to end a call. 10 Navigation Pad Press this multi-directional control up, down, left, or right to move through menus, program instructions; carry out the selection by pressing the center button Getting Started | 11 Back, Bottom, Right and Left Side View Left Side View Back View Right Side View 19 15 11 20 16 17 12 13 14 18 Bottom View Top View 26 21 12 | Getting Started 22 23 24 25 19 11 Voice Tag Press to launch the Voice Tag feature 12 Infrared Port Lets you exchange file(s) or data with other devices wirelessly. 13 Soft Reset With the stylus, press the Reset button to soft-reset your device. 14 Camera Button Press to launch the camera. Press again to take a picture. 15 Car Antenna Connector You can connect your phone to a car antenna to utilize the superior reception quality. 16 Camera Lens 17 Flash Light 18 Stylus and Stylus Slot 19 Voice Recorder/ Voice Recognition Press to record a voice note or load the voice recognition program. 20 Volume Slide left or right to adjust the volume. 21 Mini SD Card Slot Lets you insert a storage card (Mini SD) for storing data. 22 Power/Backlight Press to turn on your device or backlight. 23 Earphone Jack Allows you to listen to audio media or use the phone’s hands-free kit. 24 Sync Connector Use this connector for synchronizing data or recharging the battery. 25 Fixing Lock Press to release the back cover. 26 Microphone Speak into the microphone when receiving or making a phone call or voice recording. Getting Started | 13 Accessories The following accessories are provided with the device: 27 28 29 14 27 AC adapter Recharge the device battery. 28 USB cable Connect your device to a PC and synchronize data. 29 Stereo-wired headset with volume control jog dial, and Send and End buttons Pick up and hang up incoming and outgoing calls. | Getting Started 1.2 Installing the SIM Card Follow these steps to install a GSM SIM (Subscriber Identity Module) card provided by your local network service provider that contains your phone number, service details, and phonebook/message memory. Note Ensure the device is in the sleep mode before you install the SIM card. 1. 2. 3. 4. Remove the back cover by pressing the fixing lock. Push the red battery lock down to unlock the battery pack. Press the clip on the right side to remove the battery. Insert the SIM card into the SIM card slot with its gold contacts facing down. Its cut-off corner should match the cut-off corner in the slot. Push down lightly and forward to snap it into place. 5. Replace the battery and gently push down to snap it into place. 6. Push the red battery lock back up to lock the battery. 7. Replace the cover: Slide it back on, then push down lightly at the bottom to snap it securely into place. Getting Started | 15 1.3 Battery Information Your device contains a rechargeable Li-ion polymer battery. Your device is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including your wireless service provider’s network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to your device’s connecting ports, and your voice, data, and other program usage patterns. Battery life estimates (approximations): • Personal Digital Assistant (PDA): 15 hours • Standby time: 200 – 260 hours • Talk time (Screen off): 4 – 5 hours Warning! To reduce risk of fire or burns. • Do not attempt to open, disassemble, or service the battery pack. • Do not crush, puncture, short external contacts, or dispose of in fire or water. • Do not expose to temperatures above 60˚C (140˚F). • Replace only with the battery pack designated for this product. • Recycle or dispose of used battery as stipulated by local regulation. 16 | Getting Started To check the battery power • Tap Start > Settings > System tab > Power. Power Information Charge the battery New batteries are shipped partially charged. Before you can use your device, you need to install and charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery by: • Connecting your device directly to an external power source. • Plugging the device sync cable into the USB port on your PC. Low battery When the low-battery warning appears, do the following: 1. Immediately save your current data. 2. Synchronize with your PC to charge the battery. 3. Turn off your device. Getting Started | 17 1.4 Starting Up Turn the device on and off To turn on the device, press the POWER button. When you turn on the device for the first time, you are asked to complete a calibration process. For more information, see “Calibrate the device” in this chapter. To turn off the device, press POWER again. Note Pressing POWER turns off your device temporarily and switches the device to sleep mode. However, you can still receive messages and calls while your device is in the sleep mode. Calibrate the Device Calibrating the device screen involves tapping with the stylus the center of a cross as it moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated. If your device does not accurately respond to screen taps, follow these steps to re-calibrate it: 1. Tap Start > Settings > System tab > Screen. 2. On the General tab, tap Align Screen, and follow the instructions on the screen. 18 | Getting Started Manage screen settings The device touch screen has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs on your device, while Landscape mode may be optimal for viewing longer text files. • To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want. • To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType check box. • To increase the readability or to see more content on the screen, on the Text Size tab, adjust the text size by moving the slider. Today Screen in Portrait Mode Note Today Screen in Landscape Mode The screen orientation changes automatically when you open, unfold and rotate your device. Getting Started | 19 1.5 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. • • To access the Today screen, tap Start > Today. To customize the Today screen display, including the background image, tap Start > Settings > Personal tab > Today. 2 3 4 5 6 13 12 11 10 Today Screen Note 20 Tap to display the items listed in the Start menu. Tap to view notifications. Tap to view connectivity status. Tap to view radio signal. Tap to control device volume level. Tap to see time and next appointment. Tap and hold to change time format. Tap to open the Power Settings. Tap to open the Wireless LAN Manager screen. Tap to open the Contacts screen. 10 Tap to open Notifications or Phone screen. 11 Your day at a glance with reminders. Tap to open the related program. 12 Tap to set owner information. 13 Tap to change date and time. You can access the Today screen from anywhere by tapping Start > Today. | Getting Started 1.6 Indicators Following are some of the status icons that you may see on your device. Ringer on & adjusting sound volume Ringer in vibration mode Ringer off Battery level Main battery low Main battery very low Battery empty Battery charging Connection is active Connection is not active Synchronisation in progress Synchronisation error Indicates maximum signal strength Indicates low signal Indicates that the radio is turned off Roaming There are more indicators. Tap the icon to view all. Indicates that the device has a valid SIM card installed on it, and the device is currently in the second-generation network (such as GPRS) coverage area. Voice call Voice call in progress Getting Started | 21 Data call in progress Calls are fowarded Call on hold Missed call No phone service No SIM / USIM card installed Bluetooth Wi-Fi on Wi-Fi off Wi-Fi data call Wireless LAN initiated through Wireless Manager Bluetooth initiated through Wireless Manager GPRS initiated through Wireless Manager All Wi-Fi connections initiated through Wireless Manager New e-mail or text message (SMS) New voice mail GPRS available GPRS in use GPRS monitor currently active 22 | Getting Started Following are some of the icons for the programs that are already installed on your device. ActiveSync Synchronizes information between your device and a PC. Calculator Performs basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. Calendar Keeps track of your appointments and creates meeting requests. Camera Snaps photos or shoots video clips with accompanying audio. ClearVue PDF Enables you to open a .pdf file on your device. Contacts Keeps track of your friends and colleagues. Download Agent Provides information about the download status and the downloaded content from the Internet. Enroller Enables you to install and use certificates to connect to your Wi-Fi network. Excel Mobile Creates new workbooks or lets you view and edit Excel workbooks. File Explorer Enables you to organize and manage files on your device. Games Lets you play two games; Bubble Breaker and Solitaire are included in this folder, by default. GPRS Monitor (In CD-ROM) Keeps track of GPRS connections and tallies traffic charges. Help Enables you to see Help topics for a program on your device. Internet Explorer Internet Explorer browses Web and WAP sites, and downloads new programs and files from the Internet. Getting Started | 23 24 | Getting Started Messaging Sends and receives e-mail and text messages. MIDlet Manager Enables you to download and install Java applications, such as games and tools, on your device. Notes Creates handwritten or typed notes, drawings, and recordings. Phone Makes and receives voice and video calls, switches between calls and sets up conference calling. Pictures & Videos Collects, organizes, and sorts picture and video files in the My Pictures folder of your device or on a storage card. Pocket MSN Sends and receives instant messages with your MSN Messenger contacts. PowerPoint Mobile Lets you view and edit PowerPoint slides and presentations. Search Enables you to search contacts, data, and other information on your device. SIM Manager Collects, organizes and sorts the contact list stored in your SIM card. Tasks Keeps track of your tasks. Windows Media Player Enables the multimedia function on your device. Wireless Manager Allows you to manage the Wi-Fi and Bluetooth connection. Wireless Modem Enables your device as an external modem for a PC or Notebook by using a serial/USB port or infrared. Wireless WLAN Allows you to manage access to the wireless LAN connections. Word Mobile Creates new documents or lets you view and edit Word documents. ZIP Enables you to save memory and increase the storage capacity of your Pocket PC Phone by compressing files in the conventional ZIP format. 1.7 Using the Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. It lets you close a screen and switch from one program to another. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. Tap to switch to a program. Tap to switch to a recently-used program. Tap to see more programs. Tap to change device settings. Tap to see a Help topic for the current screen. Start Menu Getting Started | 25 26 | Getting Started Chapter 2 Entering and Searching Information 2.1 Introduction 2.2 Using the Hardware Keyboard 2.3 Using the Standard On-Screen Keyboard 2.4 Using Letter Recognizer 2.5 Using Block Recognizer 2.6 Using Transcriber 2.7 Using Phone Pad 2.8 Drawing and Writing on the Screen 2.9 Recording a Note 2.10 Searching Information 2.1 Introduction When you select a field that requires text or numbers, Input Panel automatically becomes available. Input Panel provides access to the various input methods available on your device. By default, Input Panel appears as on the menu bar. The icon indicates which input method is currently selected. The Input Selector arrow opens a list of available input methods. To show or hide Input Panel • Tap the Input Panel icon on the menu bar. Icon Indicates the selected input method is The on-screen keyboard. Letter Recognizer or Block Recognizer. Phone Pad Transcriber (if available). 2.2 Using the Hardware Keyboard Flip open the device to reveal the hardware keyboard. It is similar to a standard keyboard on your PC. You can do the following with the hardware keyboard: • 28 To type lowercase letters, press the keys using your thumbs or fingers. | Entering and Searching Information • To type a single uppercase letter or symbol and use all uppercase letters, press • Press to enter symbols or special characters from a predefined list. • • • Press to verify your data entries. Press to start the Start menu. Press the numeric keys to enter numbers in text and when dialing. • Press for directional movement. 2.3 Using the Standard On-Screen Keyboard The on-screen keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that is displayed on the screen. To enter text using the on-screen keyboard 1. In a program, tap the Input Selector arrow, and tap Keyboard. 2. Enter text by tapping keys on the on-screen keyboard. To enlarge the on-screen keyboard 1. Tap the Input Selector arrow. 2. Tap Options. 3. In the Input method list, select Keyboard. 4. Tap Large Keys. 2.4 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow, and tap Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter capital letters by writing in the ABC (left) area of the box. Entering and Searching Information | 29 • Enter lower case letters by writing in the abc (middle) area of the box. • • Enter numbers by writing in the 123 (right) area of the box. Enter punctuation and symbols by tapping in either area of the box and then writing the desired character. Note Letter Recognizer is available when text entry is possible. Tip For help with writing characters with Letter Recognizer, tap the question mark near the writing area. 2.5 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow, and tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • • • Enter letters by writing in the abc (left) area of the box. Enter numbers by writing in the 123 (right) area of the box. Enter symbols and punctuation by tapping in either area of the box and then writing the desired character. Note Block Recognizer is available when text entry is possible. Tip For help with writing characters with Block Recognizer, tap the question mark near the writing area. 2.6 Using Transcriber Transcriber is a handwriting recognition program that allows you to write in cursive, print, or a combination of both. Transcriber works transparently in the background of programs, recognizing words with its integrated dictionary. When Transcriber is turned on, it interprets stylus movement anywhere on the screen as handwriting input. 30 | Entering and Searching Information Note For more information about using Transcriber, see Help on your device. To start Transcriber 1. Start a program that accepts user input, such as Word Mobile. 2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears. To write using Transcriber 1. From a program, position the cursor where you want text to appear. 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen. To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. • Tips From a program, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. To reposition the keyboard, tap and hold the title bar, then drag to the desired location. When no text is selected, you can also open the keyboard by doing the gesture. To edit text 1. From a program, draw a line across the text you want to edit. 2. After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted. 3. Do either of the following: • Rewrite the text. • Use gestures to capitalize letters, insert a space, and so on. For information about using gestures, see “Transcriber Gestures” in this chapter. Entering and Searching Information | 31 Transcriber Gestures Use quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs. Do To Insert a paragraph return at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Insert a space at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Move the cursor one space back and erase any text. Do the gesture by drawing a line from right to left. Open the menu of alternate words if a word is selected or the onscreen Transcriber keyboard if no text is selected. Do the gesture by drawing a line straight down and back up. Change the capitalization of a selected letter, word, or block of text. Do the gesture by drawing a line straight up. Undo the last action. Do the gesture by drawing a line straight up and back down. Copy the selected text. Do the gesture by drawing a line from left to right and back. Cut the selected text. Do the gesture by drawing a line from right to left and back. Paste copied or cut text. Do the gesture by drawing a line from the lower left of the screen diagonally up toward the right and back down to the right. Insert a tab. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Tip 32 You can also use the Enter, Space, and Backspace buttons on the Transcriber toolbar. | Entering and Searching Information The Transcriber toolbar The Transcriber toolbar, which appears at the bottom of the screen when Transcriber is open, provides easy access to several tools, Enter, Space, and Backspace buttons, and Left and Right arrow buttons. Tap To Open the Options dialog box, where you can set options such as writing direction, text entry, and shorthand. Open Letter Shapes, where you can set your personal writing styles to maximize recognition. Use the miniature keyboard to quickly enter numbers, punctuation, and other symbols. Change the character recognition mode. • a mode. This is the default for optimum handwriting recognition. • 123 mode. Numbers and some letters are allowed and the calculator is activated. • A mode. All letters are automatically capitalized. If you are in A or 123 mode, recognition returns automatically to the default mode once you lift the stylus. Insert a space at the cursor. Insert a paragraph return at the cursor. Move the cursor one space to the left. Move the cursor one space to the right. Move the cursor one space back and erase any text. Open Transcriber Help. Entering and Searching Information | 33 2.7 Using Phone Pad Phone Pad provides a flexible, alternate method for entering information. Using Phone Pad, you can easily switch between three input modes: T9, Multi-Tap, and Numeric, including a list of symbols for greater convenience. Start Phone Pad Phone Pad can be started at any time, except when your device is in Camera mode or displaying the Today screen. Input Method Selection Phone Pad Settings To start Phone Pad • Tap the Input Selector arrow adjacent to the Input Panel at the bottom of the screen, and tap Phone Pad. To configure Phone Pad settings 1. Tap Start > Settings > Personal tab > Input. 2. In the Input method list, tap Phone Pad. 3. Tap Options and customize the settings. 4. Tap OK. 34 | Entering and Searching Information T9 Input Mode Symbol List Use T9 input mode By default, the device Phone Pad is in T9 mode. It is the easiest and most convenient way to enter text in English because it has the capability to enter text in alphanumeric format. As you tap alphanumeric keys on the keypad, T9 tries to automatically match the letters you have selected with the most likely completed word. You can do the following by using the T9 input mode: • To enter a word, tap the keys on the keypad. • To insert a word in the current program screen: 1. Tap any word in the word list (directly above the keypad). 2. Tap 3. Select a word, and tap to insert the word. Entering and Searching Information | 35 • To enter a number, do any of the following: • Tap and hold on the desired number key on the keypad. • Select the numeric mode, and tap the number. • • • • To insert a space or tab, tap To scroll through the word list, tap or To enter a capital letter, tap To add symbols, do any of the following: • Tap to display the most frequently used symbols on the word list. • Tap to choose a symbol from the entire list. Use Multi-Tap input mode Multi-Tap input mode is an alphabetic mode that allows you to manually enter individual letters to form words. Use Numeric input mode Numeric input mode allows you to enter a number each time you tap a number key. You can compile several numbers on the word list, and then tap to insert the numbers at the current cursor position on the screen. Use the Options screen You can customize various behaviors for Phone Pad, including the language database on the Options screen. To access the Phone Pad Options screen, do any of the following: 36 • • Tap and hold opt/sym on the keypad. Tap the Input Selector arrow at the bottom of the screen, and tap Options. • On the Input Method tab of the Input screen, tap Options. | Entering and Searching Information 2.8 Drawing and Writing on the Screen Drawing on the Screen With your Pocket PC Phone, you can draw directly on the screen, or write on the screen and save notes in your own handwriting. To do this, you must set the input mode in Notes to Writing. If you prefer to use handwriting or frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, set Typing as the default input mode. For more information on what you can do with Notes, see “Notes” in Chapter 7. To set the input mode for Notes 1. Tap Start > Programs > Notes. 2. In the note list, tap Menu > Options. 3. In the Default mode box, tap one of the following: • Writing if you want to draw or enter handwritten text in a note. • Typing if you want to create a typed note. 4. Tap OK. Entering and Searching Information | 37 To write a note 1. 2. 3. 4. Notes Tap Start > Programs > Notes. In the note list, tap New. Write your text on the screen. When finished, tap OK to return to the note list. To select handwritten text, tap and hold next to the writing. As soon as dots appear, and before they form a complete circle, quickly drag across the writing. If a letter crosses three ruled lines, it is treated as a drawing rather than text. To draw in a note To draw on the screen, use the stylus like a pen. 1. Tap Start > Programs > Notes. 2. In the note list, tap New. 3. Draw on the screen, crossing at least three ruled lines. 4. A selection box labeled Drawing appears around your drawing. 5. When finished, tap OK to return to the note list. Note 38 To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. | Entering and Searching Information Following are the check boxes on Options screen: Phone Pad Options • Turn on one-touch symbol entry. Select this check box to choose one symbol at a time. • Auto-hide matching word list. Select this check box to hide the word list after you choose a word. • Turn on screen tap sound. Select this check box to play a sound each time you tap a key. • Automatically add a space after selecting a word. Select this check box to add a space automatically at the end of every word. • Enable shortcut menu for deleting user-defined words. Select this check box to display a pop-up (shortcut) menu whenever you tap a word that is in the user database. Note Tapping Help takes you to the Phone Pad Help topics. Entering and Searching Information | 39 2.9 Recording a Note You can create a stand-alone recording (voice note) or you can add a recording to a note. For more information about creating, changing, or saving Notes, see “Notes” in Chapter 7. To create a voice note 1. Tap Start > Programs > Notes. 2. Do one of the following: • To create a stand-alone recording, record from the note list. • To add a recording to a note, create or open a note. 3. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 4. Tap to begin recording. 5. Hold your device’s microphone near your mouth or other source of sound. 6. Tap when finished recording. 7. If you adding a recording to a note, tap OK to return to the note list when finished. 8. If you are recording in an open note, an icon will appear in the note. 9. If you are creating a stand-alone recording, the recording will appear in the note list. Tip 40 To quickly create a recording, press the RECORD button. When you hear the beep, begin your recording. Release the button when you are finished. | Entering and Searching Information To change recording formats 1. Tap Start > Settings > Personal tab > Input. 2. Tap the Options tab, and in the Voice recording format list, tap the format you want. 3. Tap OK. Note You can also change recording formats from within Notes. In the note list, tap Menu > Options > Global Input Options link (at the bottom of the page). 2.10 Searching Information You can search for files and other items stored on your device in the My Documents folder or on a storage card. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help. To search for a file or an item 1. Tap Start > Programs > Search. 2. In Search for, enter the file name, word, or other information you want to search for. 3. If you have looked for this item before, tap the Search for arrow and select the item from the list. 4. 5. 6. 7. Note In Type, select a data type to help narrow your search. Tap Search. The My Documents folder and subfolders are searched. In the Results list, tap the item you want to open. The storage card symbol saved on a storage card. is displayed next to the names of files Entering and Searching Information | 41 42 | Entering and Searching Information Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Voice Call 3.3 Receiving a Voice Call 3.4 Smart Dialing 3.5 In-call Options 3.6 Additional Dialing Information 3.1 Using the Phone Like a standard mobile phone, you can use your Pocket PC Phone to make, receive, and keep track of calls and send SMS/MMS messages. You can also take notes while talking, dial directly from Contacts, and easily copy SIM contacts to Contacts on the device. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: • Press the SOFT KEY that is labeled Phone on the left-bottom of the Today screen. • • • • Use the stylus and tap Start > Phone. On the Today screen, tap Phone on the lower left of the screen. Press TALK ( ) on the device. Directly dial the phone number by pressing numeric keys on the hardware keyboard. Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. You need to enter the PIN whenever you use your device. 1. Enter the preset PIN assigned by your wireless service provider. 2. Tap Enter. Note 44 If your PIN is entered incorrectly three times, the SIM card will be blocked. If this happens, you can unblock it with the PUK (PIN Unblocking Key) obtained from your wireless service provider. | Using Phone Features Turn on and off flight mode In many countries you are required by law to turn off your phone onboard an aircraft. Turning off the power doesn’t turn off the phone. You must activate flight mode in order to turn off the phone. You can turn on flight mode and still keep your device turned on and use other functions. • Tap the Signal icon, and tap Turn on flight mode to turn off the phone. • To resume call function, make flight mode unavailable by tapping Turn off flight mode. Adjust the device volume 1. Tap the Speaker icon ( ). 2. Under Volume, do the following: • Adjust the phone volume ( ) or device volume ( moving the slider to the desired volume level. • ) by Tap On, Vibrate, or Off to change both the system and ringer volume settings. Volume Adjustment Using Phone Features | 45 Notes To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. When you activate Vibrate mode, sound will automatically be muted and the device will vibrate when an incoming call is received. The Vibrate icon ( ) will appear in the title bar to indicate that Vibrate mode is activated. 3.2 Making a Voice Call With your device, you can make a call from Phone, Contacts, Speed Dial, Call History, and SIM Manager. Make a call from Phone • On the Phone keypad, tap the desired phone number, and tap Talk at the lower right of the screen. Phone Screen Tip 46 If you tap a wrong number, tap the Back arrow ( ) to erase individual numbers one at a time. To delete all the numbers, tap and hold the Back arrow. | Using Phone Features Make a call from Contacts • • Tap Start > Contacts. Tap the desired contact, and press TALK twice (once to send the number to the Phone keypad, and once to dial the number). • You can also tap the desired contact in the contacts list, and tap the phone number that you want to call. Or, tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile. To specify the number to dial By default, the work telephone number (w) of a contact is dialed when you make a call from Contacts. However, you can specify that a different phone number is used instead. 1. Tap Start > Contacts. 2. Press NAVIGATION up or down to select the contact. 3. Press NAVIGATION left or right. The letters representing the number will change as you scroll through them. Make a call from Call History 1. On the Phone keypad, tap 2. Tap Menu > Filter and tap a category. 3. Scroll to the desired contact or phone number, and tap Call. Make a call from Speed Dial Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can simply tap and hold 2 on the Phone screen to dial the contact’s number. Before you can create a Speed Dial entry, the number must already exist in Contacts. Using Phone Features | 47 To create a Speed Dial entry 1. On the Phone keypad, tap 2. Tap Menu > New. 3. Tap a contact. Tap the phone number for which you want to create a Speed Dial. 4. In the Location box, select an available location for the new Speed Dial. Note Tips Location 1 is generally reserved for your voice mail, and Speed Dial will designate the next available location by default. If you want to place a number in a position that is already occupied, the new number will replace the number that is already there. To create a Speed Dial entry from Contacts, tap and hold the contact name, tap Add to Speed Dial, and select an available location for the new Speed Dial. To delete a Speed Dial, in the Speed Dial list, tap and hold the desired entry, and tap Delete. To make a call from SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer SIM phonebook entries to Contacts on your device, and make a call from your SIM card. 1. Tap Start > Programs > SIM Manager. Wait for your SIM card contents to load. 2. Tap and hold the name or phone number of the person you want to call, and tap Call. 3.3 Receiving a Voice Call To answer or reject an incoming call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. 48 • To answer the call, tap Answer, or press TALK ( device. • To reject the call, tap Ignore, or press END ( | Using Phone Features ) on your ) on your device. To end a call Once an incoming or outgoing call is in progress, you can press END on your device, or tap End to hang up. 3.4 Smart Dialing Smart Dialing is a program that makes it easy for you to dial a phone number. When you start entering numbers, Smart Dialing will automatically search and sort the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls). Then, you can select the desired number or contact from the filtered list to dial. To set up Smart Dialing Smart Dialing, Options 1. Open Phone, and tap Menu > Smart Dialing Options. 2. On the Options tab, select the Enable Smart Dialing check box. • Select the Enable drag-scroll check box to scroll in the matched list by dragging. • Select the Enable double-click for dialing check box to make a call by double-clicking the item in the matched list. Using Phone Features | 49 • In Scroll unit, you can set up the scrolling options when pressing NAVIGATION up or down. Use Smart Dialing Open Phone and tap the first digit of the number you want to dial, and the Smart Dialing panel will appear. You can size the panel according to your need by tapping Enlarged Panel Smart Dialing starts looking for numbers that match the sequence you have entered. Each time you tap an additional digit or delete a digit, the search is renewed and the result is re-displayed. The list may include phone numbers and/or contact names associated with matching number sequences. To make a call or send a text message using Smart Dialing 1. Begin entering the first few numbers. 2. In the Smart Dialing panel, browse the list by tapping the arrows ( / ) or pressing NAVIGATION up or down, to select the desired contact or phone number. 3. The highlighted item will move one line when you press NAVIGATION up or down; the highlighted item will scroll one page when you tap the arrows. 50 | Using Phone Features 4. Do one of the following: • When the correct contact is selected, tap Talk. • To call a different phone number associated with the selected contact, tap and hold the selected contact, and tap the phone number you want to call. Tap and hold the contact to pop up the shortcut menu • Tip To send a text message to the selected contact, tap and hold the contact, and tap Send Text Message. To view or edit information associated with the selected contact, tap the contact’s name on the shortcut menu (applies only to entries stored in Contacts on your device). Using Phone Features | 51 3.5 In-call Options To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End or press END on your device. To switch between two calls • Tap Swap. To set up a conference call 1. Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. 2. Tap Conference. Tips Note If the conference connection is successful, the word “Conference” will appear at the top of the screen. To add additional persons to your conference call, tap Hold, enter the phone number, and then tap Resume to return and continue. Not all service providers support conference calling. Contact your service provider for details. To turn on and off the Speakerphone The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation. • During a call, press and hold TALK until the Speakerphone turns on, and the icon appears in the title bar. • To turn off the Speakerphone, press and hold TALK again until the Speakerphone turns off. Warning!To avoid damage to your hearing, do not hold your device against your ear when the Speakerphone is turned on. 52 | Using Phone Features To mute a call You can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you. • • During a call, tap Mute. When the microphone is turned off, the icon appears on the screen. Tap Unmute to turn on the microphone again. 3.6 Additional Dialing Information Make an emergency call • Tip Enter the international emergency number for your locale, and tap Talk. Additional emergency numbers may be included in your SIM card. Contact your service provider for details. Make an international call 1. Tap and hold on the Phone keypad until the + sign appears. The + replaces the international prefix of the country that you are calling. 2. Enter the full phone number you want to dial, and tap Talk. The full phone number includes country code, area code (without the leading zero, if any) and phone number. SIM Tool Kit (STK) A SIM card must be inserted in your device in order to use this feature, which allows you to access a range of information services provided by your service provider. 1. Tap Start > Programs > STK. A list of provided services appears. 2. To access a service, tap the item in the list. Using Phone Features | 53 54 | Using Phone Features Chapter 4 Synchronizing Your Pocket PC Phone 4.1 Using ActiveSync 4.2 Synchronizing Information 4.3 Synchronizing via Infrared and Bluetooth 4.4 Synchronizing Music, Video, and Pictures 4.1 Using ActiveSync ActiveSync synchronizes information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync. When you synchronize, ActiveSync compares the information on your device with the information on your PC and/or Exchange Server and updates all locations with the most recent information. With ActiveSync, you can: • Synchronize information, such as Outlook E-mail, Contacts, Calendar, or Tasks information on your device with your PC, as well as pictures, video, and music. • Synchronize Outlook E-mail, Contacts, Calendar appointments, and Tasks on your device directly with Exchange Server so that you can stay up to date even when your PC is turned off. • Exchange files between your device and your PC without synchronizing. • Select which types of information are synchronized and specify how much information is synchronized. For example, you can choose how many weeks of past Calendar appointments to synchronize. Before you can synchronize information with a PC, you must first install ActiveSync on your PC and create a synchronization relationship between your device and the PC. You can install ActiveSync from the Getting Started disc that comes with your device. ActiveSync is already installed on your device. Once you have installed ActiveSync and set up a synchronization relationship, ActiveSync on the PC recognizes your device when you connect it, and automatically transfers the synchronization settings you specified on your device. You may be able to synchronize your device with Exchange Server through your company or wireless service provider. If you plan to 56 | Synchronizing Your Pocket PC Phone do so, obtain the name of the Exchange Server, your user name, password, and domain name from your administrator before starting the Sync Setup Wizard. To install and set up ActiveSync 1. Install ActiveSync on your PC, as described on the Getting Started disc. After Setup completes, the Sync Setup Wizard automatically starts when you connect your device to the PC. 2. Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard, do one or both of the following: • Create a synchronization relationship between your PC and the device. • Configure an Exchange Server connection to synchronize directly with Exchange Server. 3. Choose information types to synchronize. Note When you finish the wizard, ActiveSync synchronizes your device automatically. Once synchronization completes, you can disconnect your device from your PC. 4.2 Synchronizing Information When you connect your device to the PC using a USB or serial cable, an infrared connection, or a Bluetooth connection, ActiveSync will immediately synchronize. While the device is connected, ActiveSync synchronizes every time you make a change on either the PC or the device. Synchronizing Outlook information If you have set up a synchronization relationship between your device and the PC, synchronization keeps Outlook information up-to-date on both computers. ActiveSync synchronizes a limited amount of information by default to save storage space on your device. You can change the amount of information synchronized for a given information type in Settings for the information type. Synchronizing Your Pocket PC Phone | 57 You can set up your device to synchronize with more than one PC or with a combination of one or more PCs and Exchange Server. When synchronizing with multiple computers, the items that you synchronize will appear on all of the computers with which they are synchronized. For example, if you have set up synchronization with two PCs (PC1 and PC2), which have different items, and you synchronize Contacts and Calendar on the device with both computers, the result is as follows: Location New state PC1 All Outlook contacts and calendar appointments that were on PC2 are now also on PC1. PC2 All Outlook contacts and calendar appointments that were on PC1 are now also on PC2. Device All Outlook contacts and calendar appointments from both PC1 and PC2 are on the device. Note Outlook e-mail can be synchronized with only one computer. To start and stop synchronization • To synchronize Outlook information and other local information on the PC, including media files, connect your device to the PC using Bluetooth, infrared (IR) or a cable or cradle. • If you are synchronizing directly with Exchange Server, you can use this connection to the PC to "pass though" to the network, or you can synchronize without connecting to the PC over a cellular or Wi-Fi network. • In ActiveSync, tap Sync. • To end synchronization before it completes, tap Stop. To change which information is synchronized 1. In ActiveSync on the device, tap Menu > Options. 58 | Synchronizing Your Pocket PC Phone 2. Do one or both of the following: • Select the check box for any items you want to synchronize. If you cannot select a check box, you might have to clear the check box for the same information type elsewhere in the list. • Clear the check box for any items you want to stop synchronizing. 3. To stop synchronizing with one PC completely, tap the PC and tap Delete. Notes Outlook e-mail can be synchronized with only one computer. To change available synchronization settings, select the type of information and tap Settings. To synchronize directly with Exchange Server You can set up synchronization with Exchange Server on your device, if it is available to you through your company or wireless service provider. However, you should first ask your administrator for the following information and then carry on with the steps: Exchange Server name, your user name, password, and domain name. 1. In ActiveSync on the device, tap Menu > Configure Server. If you have not yet set up synchronization with Exchange Server, this will say Add Server Source. 2. In Server address, enter the name of the server running Exchange Server, and tap Next. 3. Enter your user name, password, and domain, and tap Next. • To change the rules for resolving synchronization conflicts, tap Advanced. 4. Select the check boxes for the types of information items that you want to synchronize with Exchange Server. 5. To change available synchronization settings, select the type of information, and tap Settings. 6. Tap Finish. Synchronizing Your Pocket PC Phone | 59 4.3 Synchronizing via Infrared and Bluetooth You can connect your device to the PC to synchronize using the local wireless technologies, such as infrared (IR) and Bluetooth. These technologies have almost similar but slightly differing requirements. To synchronize with a PC via infrared 1. Follow the instructions in ActiveSync Help on the PC for setting up your PC to receive infrared beams. 2. Line up the infrared (IR) ports according to the instructions in the manufacturer’s documentation for your device so that they are unobstructed and within close range. 3. On the device, tap Start > Programs > ActiveSync. 4. Tap Menu > Connect via IR. 5. Tap Sync. To synchronize with a PC via Bluetooth 1. Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your PC to support ActiveSync. 2. On the device, tap Start > Programs > ActiveSync. 3. Tap Menu > Connect via Bluetooth. Make sure that Bluetooth is turned on at the device and the PC, and that they are within close range. 4. If this is the first time you have connected to this PC via Bluetooth, you must first complete the Bluetooth wizard on the device and set up a Bluetooth partnership between your device and the PC. For more information about enabling and configuring Bluetooth, see Chapter 6. Note 60 You can also use the Sync Setup Wizard to set up the device to synchronize remotely with Exchange Server. This wizard is started when you connect your mobile device to your PC after installing ActiveSync on the PC. | Synchronizing Your Pocket PC Phone 4.4 Synchronizing Music, Video, and Pictures If you want to carry your music or other digital media with you along while you travel, ActiveSync works with Windows Media Player to synchronize music, video, and pictures with your device. Other than selecting the Media information type in ActiveSync to be synchronized, all media synchronization settings must be set in Windows Media Player. Before media can be synchronized, you must do the following: • Install Windows Media Player Version 10 on the PC. • Connect your device to the PC with a USB cable. If the device is currently connected using Bluetooth or infrared, you must end that connection before media can be synchronized. • • Insert a 32-MB or larger storage card into your device. Set up a sync partnership between the storage card and Windows Media Player. Change Media synchronization settings Once you select the Media information type in ActiveSync to be synchronized, any of your favorite music, video, and picture files in Windows Media Player playlists can be synchronized. All you have to do is set up synchronization in Windows Media Player for those media files. To set up a sync relationship with a storage card 1. Open Windows Media Player. 2. Click the Sync tab. 3. Select the storage card. 4. Click Set up Sync. For information about using Windows Media Player on the device, see Chapter 8. Synchronizing Your Pocket PC Phone | 61 62 | Synchronizing Your Pocket PC Phone Chapter 5 Managing Your Pocket PC Phone 5.1 Personalizing Your Pocket PC Phone 5.2 Adding and Removing Programs 5.3 Managing Memory 5.4 Backing Up Files 5.5 Protecting Your Device 5.6 Resetting Your Pocket PC Phone 5.1 Personalizing Your Pocket PC Phone Today screen settings To customize the Today screen 1. Tap Start > Settings > Personal tab > Today. 2. On the Appearance tab, select the desired theme for the background of the Today screen. 3. On the Items tab, select the items you want to appear on the Today screen. Tip To change the order of items displayed on the Today screen, tap the item, and tap Move Up or Move Down. To add a custom background image You can use one of your own pictures as the background image on the Today screen. Be aware that pictures can affect the readability of text on the Today screen. 1. Tap Start > Settings > Personal tab > Today. 2. Select the Use this picture as the background check box, and tap Browse to view a list of your picture files. 3. Tap the file name of the picture you want to use. 4. Tap OK. To set options for displaying appointments on the Today screen If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen. 1. 2. 3. 4. 64 Tap Start > Settings > Personal tab > Today. Tap the Items tab. Select Calendar and tap Options. Do any of the following: • Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. | Managing Your Pocket PC Phone • Clear the Display all day events check box if you do not want to display all-day events. To set options for displaying tasks on the Today screen If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen. 1. 2. 3. 4. Tap Start > Settings > Personal tab > Today. Tap the Items tab. Select Tasks and tap Options. Do any of the following: • Under Display number of, select the type of tasks you want to appear on the Today screen. • In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks. Customize the Start menu You can choose which items appear in the Start menu. 1. Tap Start > Settings > Personal tab > Menus. 2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven items. Tip You can also create folders and shortcuts to appear on the Start menu. In ActiveSync on your PC, click Explore. Double-click My Windows Mobile-Based Device, click Windows, click Start Menu, and then create the folders and shortcuts that you want. You will see the added items after you synchronize. Set Date / Time / Language / Regional Options To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your PC. Managing Your Pocket PC Phone | 65 To set an alarm 1. Tap Start > Settings > System tab > Clock & Alarms > Alarms tab. 2. Tapand enter a name for the alarm. 3. Tap the day of the week for the alarm. You can select multiple days by tapping each desired day. 4. Tap the time to open a clock and set the time for the alarm. 5. Tap to specify the type of alarm you want. You can choose a flashing light, a single sound, a repeating sound, or vibration. 6. If you choose to play a sound, tap the list next to the Play sound check box and tap the sound you want. To set the time and date for a different location If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone. 1. Tap Start > Settings > System tab > Clock & Alarms. 2. Tap Visiting. 3. Select the correct time zone and change the time or date. To change language and regional settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1. Tap Start > Settings > System tab > Regional Settings. 2. On the Region tab, select your region and language. 3. The region you select determines which options will be available on the other tabs. 4. To customize settings further, tap the appropriate tabs and select the desired options. 66 | Managing Your Pocket PC Phone Personal and system settings To reassign programs or shortcuts to program buttons Your device may come with programs already assigned to hardware buttons. You can customize these buttons to open the programs you use most, or to perform certain shortcuts such as changing the screen orientation, opening the Today screen, or opening Input Panel. 1. Tap Start > Settings > Personal tab > Buttons. 2. A list of buttons and their current assignments is displayed on the Program Buttons tab. 3. Tap the button you want to reassign. To help you identify the buttons, there are numbers and icons representing the original function of the button. 4. In the Assign a program box, tap the program or shortcut you want to assign. 5. Tap OK. To increase or decrease the size of text on the screen 1. Tap Start > Settings > System tab > Screen > Text Size tab. 2. Move the slider to increase or decrease the text size. To enter owner information Entering and displaying owner information are best practices; they allow someone to return the device to you in case it is lost. 1. Tap Start > Settings > Personal tab > Owner Information. 2. On the Identification tab, enter your personal information. Tip If owner information is displayed on the Today screen, you can open and edit the information directly from the Today screen. Just tap that section of the screen. Managing Your Pocket PC Phone | 67 To choose how to be notified about events or actions 1. Tap Start > Settings > Personal tab > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, or a flashing light. Tip Turning off sounds and the flash light helps conserve battery power. To adjust the volume for sounds You can change the volume for sounds, such as the sound you hear when you tap program names and menu options. 1. Tap . 2. Under level. , move the system volume slider to the desired volume 3. Tap On, Vibrate, or Off to quickly change both the system and ringer volume settings. Tip 68 You can also press the volume control on your device to quickly change both the ringer and system volume settings. | Managing Your Pocket PC Phone To adjust the speed for scrolling Pressing and holding NAVIGATION up or down (Up/Down control) scrolls through the items in a list. 1. Tap Start > Settings > Personal tab > Buttons > Up/Down Control tab. 2. Do one of the following: • Under Delay before first repeat, move the slider to shorten or lengthen the time that elapses before scrolling begins. • To change the time it takes to scroll from one item to the next, under Repeat rate, move the slider to adjust the speed. To find the operating system version number • Tap Start > Settings > System tab > About. The version of the operating system on your device will be listed near the top of the screen. To get detailed device information • Tap Start > Settings > System tab > About. The Version tab displays important device information, including the type of processor and the amount of memory that is installed. To change the device name 1. Tap Start > Settings > System tab > About. 2. Tap the Device ID tab. 3. Enter a name. The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words. Managing Your Pocket PC Phone | 69 Why is the device name important? The device name is used to identify the device in the following situations: • • • Note Synchronizing with a PC Connecting to a network Restoring information from a backup If you synchronize multiple devices with the same PC, each device must have a unique name. To make the battery last longer The device battery power lasts based on the battery type and how you use your device. Try the following to help preserve battery life: • Tap Start > Settings > System tab > Power. On the Advanced tab, you can specify when your device turns off to conserve battery power. For optimum conservation, specify 3 minutes or less. • Use the AC adapter to plug your device into external power whenever possible, especially when using a CompactFlash card or when using a modem or other peripherals. • Adjust the backlight settings. To adjust the brightness of the backlight 1. Tap Start > Settings > System tab > Backlight > Brightness tab. 2. Move the sliders up to increase and down to decrease the brightness. To set the backlight to dim after a time delay 1. Tap Start > Settings > System tab > Backlight. 2. Tap the Battery Power tab or the External Power tab. 3. Select the Turn off backlight if device is not used for check box, and specify the time delay. 70 | Managing Your Pocket PC Phone Phone settings You can customize phone settings, such as the ring type and ring tone to be used for incoming calls, and the keypad tone to be used when entering phone numbers. To change the ring tone 1. From the Phone keypad, tap Menu > Options > Phone tab. 2. In the Ring tone list, tap the sound you want to use. Tip To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on your PC to copy the file to the /Windows/Rings folder on your device. Then, select the sound from the Ring tone list. For more information about copying files to your device, see ActiveSync Help on your PC. To change the ring type You can change the way that you are notified of incoming calls. For example, you can choose to be notified by a ring, a vibration, or a combination of both. 1. From the Phone keypad, tap Menu > Options > Phone tab. 2. In the Ring type list, tap the desired option. To change the keypad tone You can change the tone you hear when entering a phone number on the keypad. If set to Long tones, the tone is heard continuously for as long as the number on the keypad is pressed. Use this setting if you are having trouble accomplishing tasks that rely on tones from your phone such as accessing messages from an answering machine. If set to Short tones, the tone is heard only for one or two seconds. If set to Off, no tone will be heard. 1. From the Phone keypad, tap Menu > Options > Phone tab. 2. In the Keypad list, tap the option you want. Managing Your Pocket PC Phone | 71 Phone services Services, such as Call Waiting enable you to choose how to handle all incoming calls on your device. To display Caller ID, block calls, use Call Waiting, or use Call Forwarding 1. Tap Start > Settings > Phone > Services tab. 2. Tap the service you want to use and tap Get Settings. Networks You can view available wireless networks, determine the order in which your device accesses another network if the current one is unavailable, and specify whether you want to change networks manually or automatically. For more information about network settings, see Help on your device. To change phone network settings • Tap Start > Settings > Phone > Network tab. By default, your device displays the current network as offered by your service provider. However, you can customize to set your preferred network. To set preferred networks 1. Tap Set Networks on the Network tab. 2. Select the networks on the Phone: Preferred networks screen and sort them according to your preference. 3. Tap OK. By default, Network selection field is set to Automatic. However, you can set it to Manual to choose your own network at any point of time. Bands Your device uses radio waves to transmit your conversations. These radio waves can be at different frequencies, called bands. This works almost the same way as regular radio stations broadcast their programs at different frequencies. Typically, your device uses 72 | Managing Your Pocket PC Phone frequencies within four different frequency bands, such as 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz. To customize the default band type 1. On the Band tab, select the network type. 2. Select the band you prefer. 3. Tap OK. Ideally, you would want a phone that can work on all four bands – commonly called a quad-band phone. However, your device supports triband capabilities. The More tab on the Phone Settings screen provides you options to pick up your calls automatically after three rings. The Broadcast Channels option allows you to receive and listen to radio channels available on a particular frequency. 5.2 Adding and Removing Programs Before you purchase additional programs for your device, you should note the name of your device, the version of Windows Mobile software running on it, and the type of processor. This information will help you select a program that is compatible with your device. For more information, see "To get detailed device information" and "To find the operating system version number" in this chapter. Programs available for purchase usually include a Setup program (commonly named "setup.exe") that you must first install on your PC. You can then use ActiveSync to add programs to your device, or add a program directly from the Internet. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your device and processor type. Managing Your Pocket PC Phone | 73 2. Read any installation instructions or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect your device and PC. 4. Double-click the *.exe file. • If the executable file is an installation wizard, follow the instructions on the screen. Once the program has been installed on your PC, the wizard will automatically transfer the program to your device. • If an installation wizard does not start, you will see an error message stating that the program is valid but that it is designed for a different type of computer. You will need to copy this program to your device. If you cannot find any installation instructions for the program, use ActiveSync to copy the program file to the Program Files folder on your device. To remove programs You can only remove programs that you installed. Programs that come with your device cannot be removed. 1. Tap Start > Settings > System tab > Remove Programs. 2. In the Programs in storage memory list, select the program you want to remove, and tap Remove. 3. Tap Yes. If another confirmation message appears, tap Yes again. 74 | Managing Your Pocket PC Phone 5.3 Managing Memory To see how much memory is available • Tap Start > Settings > System tab > Memory. On the Main tab, the amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see available storage card memory You can see how much memory is available on a storage card that is inserted in your device. 1. Tap Start > Settings > System tab > Memory. 2. Tap the Storage Card tab. Tip If you have more than one card inserted, tap the list box and then the storage card whose information you want to see. To free up program memory Try the following to free memory on your device: • Close programs you are not currently using. • Move e-mail attachments to a storage card. • Move files to a storage card. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Cut. Browse to the storage card folder and tap Edit > Paste. • Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Delete. • Delete large files. To find your largest files, tap Start > Programs > Search. In the Type list, tap Larger than 64 KB, and tap Search. • In Internet Explorer Mobile, delete temporary Internet files and clear history information. For more information, see "Internet Explorer Mobile" in Chapter 6. • • Remove programs you no longer use. Reset your device. Managing Your Pocket PC Phone | 75 To close a program In most cases, programs automatically close to free needed memory, however, you can close programs manually, if you prefer. 1. Tap Start > Settings > System tab > Memory > Running Programs tab. 2. In the Running Programs list, tap the program you want to close, and tap Stop. Tip In most programs, you can also use the keyboard shortcut CTRL+Q to close the program. 5.4 Backing Up Files You can back up files to your PC using ActiveSync, or copy files to a storage card you insert into your device. Your device has an expansion slot compatible with a range of secure digital (SD) and multimedia (MMC) storage cards. Using ActiveSync, you can copy or move information from the PC to the device and vice versa. Changes you make to the information on one computer will not affect the information on the other computer. If you want to automatically update information on both your device and PC, synchronize the information instead. For more information about copying and synchronizing files, see ActiveSync Help on your PC. To copy files to a storage card 1. Push the storage card into the storage card slot until it clicks into place. The card is secure when it does not protrude from the base. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, and tap Copy. 4. Tap the folder list (labeled My Documents by default) and tap Storage Card. 5. Tap Menu > Edit > Paste. 76 | Managing Your Pocket PC Phone To copy a file using ActiveSync Copying a file results in separate versions of a file on your device and PC. Because the files are not synchronized, changes made to one file will not affect the other. 1. Connect your device to your PC. 2. In ActiveSync, click Explore, which opens the Mobile Device folder for your device. 3. In the Mobile Device folder, go to the file that you want to copy on your device or PC. 4. Do one of the following: • To copy the file to your device, right-click the file, and click Copy. Right-click the desired folder under Mobile Device, and click Paste. • To copy the file to your PC, right-click the file and click Copy. Right-click the desired folder on your PC, and click Paste. To automatically save files on a storage card In the Word Mobile, Excel Mobile, and Notes programs, you may find it helpful to save all new documents, notes, and workbooks directly on a storage card. 1. From the program file list, tap Menu > Options. 2. With a storage card inserted in the device, in the Save to box, tap the appropriate storage card to automatically save new items on the storage card. 3. Tap OK. Note In the file or note list, a storage card symbol is displayed next to the names of files saved on a storage card. Managing Your Pocket PC Phone | 77 5.5 Protecting Your Device There are two kinds of security on your device. You can protect your phone from unauthorized use by assigning a type of password called a PIN (personal identification number). Additionally, you can prevent unauthorized access to any part of the device by using password protection. Your first PIN will be given to you by your wireless service provider; you can change the PIN later. You create your own password when you begin using your device. To protect your phone with a PIN 1. From the Phone keypad, tap Menu > Options > Phone tab. 2. Tap Require PIN when phone is used. To change the PIN at any time, tap Change PIN. Tip Emergency calls can be placed at any time, without requiring a PIN. To protect your device with a password You can help keep your data more secure by requiring a password every time the device is turned on. 1. Tap Start > Settings > Personal tab > Password. 2. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be turned off before a password is required. In the Password type box, select the type of password you would like to use. Enter the password and, if necessary, confirm the password. If your device is configured to connect to a network, use a strong password to help protect network security. 3. On the Hint tab, enter a phrase that will help you remember your password, but doesn’t allow others to guess your password. The hint will be displayed after the wrong password is entered four times. 78 | Managing Your Pocket PC Phone 4. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes Each time a wrong password is entered, the time the device takes to respond will get longer and longer until the device appears to be not responding. If you forget your password, you must follow the instructions in your owner’s manual to clear memory before you can access your device. To change your password 1. Tap Start > Settings > Personal tab > Password. You will be prompted to enter your current password. 2. In the Password box, enter your new password. 3. On the Hint tab, enter a phrase that will help you remember your new password, but doesn’t allow others to guess your password. The hint will be displayed after the wrong password is entered four times. 4. Tap OK. To display owner information on the Today screen Having your contact information displayed on the Today screen on startup allows for easy identification of the device in case it is lost. 1. Tap Start > Settings > Personal tab > Owner Information. 2. On the Options tab, select the Identification information check box. 3. On the Options tab, select the Notes check box if you want additional text displayed, such as: Reward if found. 4. On the Notes tab, enter the additional text. Tip To display owner information on the Today screen, tap Start > Settings > Personal tab > Today. On the Items tab, select the Owner Info check box. Managing Your Pocket PC Phone | 79 5.6 Resetting Your Pocket PC Phone Occasionally you may need to reset your Pocket PC Phone. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain. To perform a soft reset • Use the stylus to lightly press and hold the RESET button on the left side of your device. The device restarts and displays the Today screen. reset button 80 | Managing Your Pocket PC Phone To perform a hard reset • Press and hold both SOFT KEYS shown enclosed by circles in the picture below. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the left side of your device. Press either 0 to restore to factory default or X to exit the hard reset process. reset button Managing Your Pocket PC Phone | 81 82 | Managing Your Pocket PC Phone Chapter 6 Getting Connected 6.1 Connecting to the Internet 6.2 Internet Explorer Mobile 6.3 Using Bluetooth 6.4 Using Wireless Modem 6.5 Using Wireless LAN Manager 6.6 Using GPRS Monitor 6.7 Using Terminal Services Client 6.1 Connecting to the Internet Your device is equipped with powerful networking functions that enable you to connect to the Internet through a General Packet Radio Service (GPRS) network or a Bluetooth modem. The GPRS is a new nonvoice value added service that allows information to be sent and received across a mobile telephone network. You can set up connections to the Internet or to a corporate network to browse the Internet, and exchange e-mail or instant messages. Your device has two groups of connection settings: My ISP (Internet Service Provider) and My Work Network. The My ISP settings are used to connect to the Internet, while My Work Network settings can be used to connect to any private, corporate network. To connect to the Internet via ISP 1. Obtain the following information from your ISP: • ISP server phone number • User name • Password • Access point name (required for GPRS connection) 2. Tap Start > Settings > Connections tab > Connections. 3. Tap Add a new modem connection. 4. Enter a name for the connection. 5. Select a modem from the list: • If you want to use the mobile phone network, select Cellular Line. • If you want to use GPRS, select Cellular Line (GPRS). 6. Tap Next. 7. Complete the connection wizard by entering the required information and tap Finish. Notes To view additional information for any screen, tap Help. To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard. 84 | Getting Connected To start browsing the Internet, tap Start > Programs > Internet Explorer. To connect to a private network Connection Setting 1. Obtain the following information from your network administrator: • Server phone number • User name • Password • Domain (If provided by an ISP or a network administrator) 2. Tap Start > Settings > Connections tab > Connections. 3. In My Work Network, follow the instructions for each type of connection. 4. Complete the connection wizard and tap Finish. Note To start browsing the private network, tap Start > Programs > Internet Explorer. Getting Connected | 85 To reset or modify the network card settings on your device 1. Tap Start > Settings > Connections tab > Network Cards. 2. In the My network card connects to list, select the appropriate item: • If you want to connect to the Internet using your ISP, select The Internet. • If you want to connect to a private network, select Work. 3. In Tap an adapter to modify settings, tap the appropriate adapter. The fields on the IP Address tab are populated automatically. 4. Configure the TCP/IP settings, if required. If your ISP or private network does not use dynamically-assigned IP addresses, tap Use specific IP address and enter the requested information. Contact your ISP or network administrator to obtain the IP address, subnet mask, and/or default gateway (if required). 5. Configure the DNS and WINS settings, if required. If your ISP or private network does not use dynamically-assigned IP addresses, enter the requested information on the Name Servers tab. Servers that require an assigned IP address may also require a way to map computer names to IP addresses. DNS and WINS are the resolution options supported on your device. 86 | Getting Connected 6.2 Internet Explorer Mobile Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your mobile device. To start Internet Explorer Mobile • Tap Start > Internet Explorer. To choose a Home page 1. In Internet Explorer Mobile, tap Menu > Tools > Options > General tab. 2. Do one of the following: • To use the displayed page as your Home page, tap Use Current. • Tip To use the default Home page, tap Use Default. To go to your Home page, tap Menu > Home. To transfer favorites from your PC You can transfer the favorites you have stored on your PC to your device by synchronizing the Internet Explorer favorites on your PC with your device. 1. In ActiveSync on your PC, on the Tools menu, click Options, and select Favorites. 2. In Internet Explorer on your PC, save or move favorite links to the Mobile Favorites subfolder in the Favorites list. 3. Connect your mobile device to your PC. If synchronization does not start automatically, click Sync. To add a favorite 1. In Internet Explorer Mobile, go to the page you want to add. 2. Tap and hold the page, and tap Add to Favorites. 3. Confirm or change the name, and select a folder for storing the favorite. To delete a favorite or folder 1. In Internet Explorer Mobile, tap Menu > Favorites > Add/Delete tab. 2. Select the item you want to delete, and tap Delete. Getting Connected | 87 To change how Web pages fill the screen 1. In Internet Explorer Mobile, tap Menu > View. 2. Tap one of the following: • One Column. Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally. • • Default. Maintains a layout similar to what you see on a desktop computer, but it makes items smaller and arranges the content so that you can see most of it without having to scroll horizontally. Desktop. Keeps the same layout and size as on a desktop computer, which will require both horizontal and vertical scrolling. To change the size of text on Web pages • In Internet Explorer Mobile, tap Menu > Zoom, and tap the size you want. To show or hide pictures on Web pages • In Internet Explorer Mobile, tap Menu > View > Show Pictures. A check mark next to Show Pictures indicates that pictures will be displayed on Web pages. To clear the History list 1. In Internet Explorer Mobile, tap Menu > Tools > Options > Memory tab. 2. Tap Clear History. To save a picture from a Web page 1. In Internet Explorer Mobile, tap and hold the picture, and tap Save Image. 2. Do one of the following: • To save the picture in My Pictures on your device, tap Yes. • To save the picture in another location, such as a storage card, tap Save As. 88 | Getting Connected To change cookies and security settings Internet Explorer Mobile supports the protocols used by Secure Sockets Layer (SSL). A connection that uses SSL helps you to send personal information more safely. Cookies are small files containing information about your identity and preferences so that a page can tailor information to your needs. The page sends the file, and it is stored on your mobile device. 1. In Internet Explorer Mobile, tap Menu > Tools > Options > Security tab. 2. Select the check boxes for the options you want, and click OK. Tip To prevent Internet Explorer Mobile from accepting any cookies, clear the Allow cookies check box. To delete temporary Internet files Some Web content is stored as you view it to speed up the display of pages you frequently visit or have already seen. You may want to delete these files to free storage space. 1. In Internet Explorer Mobile, tap Menu > Tools > Options > Memory tab. 2. Tap Delete Files. All pages stored on your device, including offline favorites content, will be deleted. Getting Connected | 89 6.3 Using Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within range. The software included with your device allows you to use Bluetooth in the following ways: • Beam information, such as files, appointments, tasks, and contact cards, between devices that have Bluetooth capabilities. • Create a dial-up modem connection between your device and a Bluetooth-enabled phone, and then beam information using the Bluetooth phone as a modem. To turn on or off Bluetooth on your device 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. 3. Tap OK. Note To add an extra layer of security while beaming information with other devices, or to set up Bluetooth synchronization, tap Start > Settings > System tab > Bluetooth Setting. Bluetooth modes Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on and you can use Bluetooth features. • Off. Bluetooth is turned off. In this mode, you can neither send nor receive information using Bluetooth. You might want to turn the radio off at times in order to conserve battery power, or in situations where radio use is prohibited, such as onboard an aircraft and in hospitals. 90 | Getting Connected Note • By default, Bluetooth is turned off. If you turn it on, and then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. Discoverable. Bluetooth is turned on, and all other Bluetoothenabled devices within a range of 10 meters can detect your device. To make your device discoverable 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. 3. Tap OK. Note Selecting the Make this device discoverable to other devices check box also turns on Bluetooth. Bluetooth partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. Creating a partnership between two devices involves entering the same personal identification number (PIN) on both devices. Creating a partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a PIN again. Make sure the two devices are within a range of 10 meters from one another, and Bluetooth is turned on and in discoverable mode. To create a Bluetooth partnership 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. On the Devices tab, tap New Partnership. Your device searches for other Bluetooth devices and displays them in the box. Getting Connected | 91 3. Tap the desired device name in the box. 4. Tap Next. 5. Enter a passkey to establish a secure connection. The passkey must be between 1 and 16 characters. 6. Tap Next. 7. Enter the same passkey that is entered on the other device. You can, however, edit and enter a new name for the other device. 8. Tap Finish. To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Tap OK when prompted to establish a partnership with the other device. 3. Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection. The passkey must be between 1 and 16 characters. 4. Tap Next. 5. Tap Finish. You can now exchange information with the other device. To rename a Bluetooth partnership 1. Tap Start > Settings > Connections tab > Bluetooth. 2. Tap and hold the partnership on the Devices tab. 3. On the shortcut menu, tap Edit. 4. Enter a new name for the partnership. 5. Tap Save. 92 | Getting Connected To delete a Bluetooth partnership 1. Tap Start > Settings > Connections tab > Bluetooth. 2. Tap and hold the partnership on the Devices tab. 3. Tap Delete from the shortcut menu. Beam information using Bluetooth To beam information from your device 1. On the device, tap and hold an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file. 2. Tap Beam [type of item]. 3. Tap the device name to which you want to send the beam. The item is beamed to the device you selected. Note If the device you want to beam to does not appear in the box, make sure that it is turned on, discoverable, and within close range (10 meters) of your device. Use a Bluetooth device as a modem You can use a phone that has Bluetooth capabilities as a modem for your device. To do so, create a Bluetooth modem connection on your device and then send information to another device by using Bluetooth. The device relays the information over the network and then sends back to your device any information that you had requested over the connection. Once you create a modem connection to the Bluetooth phone, you can reuse it whenever you want to use the phone as a modem. Make sure that your device and the destination device are turned on, Bluetooth is turned on, and that the devices are within close range. Getting Connected | 93 To configure and use a Bluetooth device as a modem 1. On your device, tap Start > Settings > Connections tab > Connections. 2. 3. 4. 5. 6. 7. Tap Add a new modem connection. Enter a name for the connection. In the Select a modem list, tap Bluetooth. Tap Next. If the device appears in the My Connections list, skip to step 11. If the device does not appear in the My Connections list, tap New, and follow the remaining steps. 8. Select the device name from the list and tap Next. 9. Enter a passkey and tap Next. 10.Enter the same passkey on the device and tap Finish. 11. In the My Connections list, tap the device and tap Next. 12.Enter the phone number to dial for this connection and tap Next. 13.Enter the required logon information for this connection and tap Finish. You can start using this service for the program that uses the Bluetooth connection, such as Inbox on your device, to send and receive e-mail, or Internet Explorer to browse the Web. 94 | Getting Connected 6.4 Using Wireless Modem This program activates your device as a wireless modem and lets you connect your PC to a wireless network. Before you create and configure a new modem using a connection, you must install the drivers on your PC. Wireless Modem To establish a connection using Wireless Modem 1. On your device, tap Start > Programs > Wireless Modem. 2. In the Connection Type list, select IrDA. This allows you to connect your device via infrared to a PC. 3. Tap Start. Important note Before you tap Start, make sure your device has a GPRS SIM card installed, and you have connected your device to a PC using an IrDA (infrared) connection, and disabled ActiveSync. Set up your PC Before you start using Wireless Modem with an IrDA connection, you must configure a new modem on your PC and obtain the APN (Access Point Name) from your Internet service provider (ISP). Getting Connected | 95 To configure a modem on your PC 1. On your PC, select Start > Settings > Control Panel. 2. Double-click Phone and Modem Options. 3. On the Modems tab, click Add. 4. Select the Don’t detect my modem; I will select it from a list check box. 5. 6. 7. 8. 9. In the Manufacturers list, select Standard Modem Types. Select Standard 33600 bps Modem and click Next. Select the modem port on which you want to install the drivers. Click Next. Click Finish. Now, when you check the Modems tab in the Phone and Modem Options dialog box, a Standard 33600 bps Modem appears in the modem list. 10.Select Standard 33600 bps Modem. 11. Click Properties. 12.Click the Advanced tab. 13.Enter the following string in the Extra initialization commands field: AT+CGDCONT=1,”IP”,”APN”,””,0,0. 14.Click Change Default Preferences. 15.On the General tab, select Float control to None. 16.Click OK until the modem installation wizard exits. 96 | Getting Connected To create a new dial-up connection After a new standard modem has been set up on your PC, you must create a new dial-up connection. 1. 2. 3. 4. 5. 6. 7. On your PC, select Start > Settings > Control Panel. Double-click Network and Dial-up Connections. Double-click Make New Connection. Click Next to continue. Click Dial-up to the Internet. Click Next. Click I want to set up my Internet connection manually, or I want to connect through a local area network (LAN) and click Next. 8. Click I connect through a phone line and a modem and click Next. 9. Select the Use area code and dialing rules check box. 10.Enter the telephone number as *99# and click Next. 11. Enter the user name and password you use to log on to your ISP and click Next. 12.Enter a name for this connection and click Next. 13.Select No when the installation wizard prompts you to set up an Internet mail account and click Next. 14.Click Finish to exit the wizard. Getting Connected | 97 Connect through a USB Port To connect through a USB port, you need to first set up a USB modem on your PC. Before setting up a USB modem, verify that you have the following files: • USBMDM • USBModem_Dialer Both files are available on the Getting Started CD. Run the Getting Started CD from the CD-ROM of your PC and do the following on your device: 1. On your device, tap Start > Programs > Wireless Modem. 2. Select USB as the connection type, and insert the USB cable adapter. 3. Tap Start on the Wireless Modem screen of your device. The Found New Hardware message appears on your PC. 4. On your PC, select Display a list of the known drivers for this device so that I can choose a specific driver and click Next. 5. In the Hardware types list, select Modem and click Next. 6. Click Next. 7. Click Have Disk. 8. Click Next. 9. Select the recognized USB Modem from the Modems list. 10.Click Next. 11. Click Finish. 12.On your PC, click Start, click Settings, and click Control Panel. 13.Double-click Phone and Modem Options. 14.Select the new USB modem from the Modems list. 15.Double-click the USB Modem Dialer file on the Getting Started CD. 16.Enter the GPRS settings (enter the APN assigned by your ISP) 17.Click Dial to start the connection. 98 | Getting Connected Once you set up a USB modem on your PC, you are ready to establish a connection using Wireless Modem via a USB port. To establish a connection using Wireless Modem via a USB port 1. On your device, tap Start > Programs > Wireless Modem. 2. In Connection Type, select USB. 3. Tap Start. Note Before you tap Start, make sure your device has a GPRS SIM card installed, and you have connected your device to a PC using the device to PC USB connector (using the USB sync cable or cradle) and disabled ActiveSync. To establish a connection using Wireless Modem via Bluetooth 1. On your device, tap Start > Programs > Wireless Modem. 2. In Connection Type, tap Bluetooth. 3. Tap Start. Notes Before you start using your device as a Bluetooth modem, make sure that your PC is Bluetooth-enabled. You also need to check that: • A GPRS-enabled SIM card is installed on your device. • The ActiveSync BT port connection of your PC is disabled. • The Infrared function is disabled. Note the interface of the Bluetooth program installed on your PC may vary. If so, follow the installation instructions in the manual that came with your PC. Getting Connected | 99 6.5 Using Wireless Manager Wireless Manager allows you to view and manage Wi-Fi Internet connections, Bluetooth, and second generation network (GPRS) on your device. You can use the device’s Power Save Mode to make optimal use of the battery under the WLAN networking environment, view a variety of data related to the current configuration and signal quality, and increase network security. To run Wireless LAN on your device, you need access to broadband Internet, and the necessary access point or router that emits WLAN signals. If you do not have access to broadband Internet, consult your ISP before you try to run this utility. However, the availability and range of your device’s WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. Notes You can activate Bluetooth on your device and communicate with other Bluetooth enabled devices. To communicate, make sure you have another device with Bluetooth activated on it, which is within the close range of your device (within 10-meter range). To activate a second generation network like GPRS on your device and communicate with other devices on the network, you need to have a SIM or USIM card installed on your device. Check for a Wireless LAN signal Before you start a Wi-Fi connection, verify that your device has access to a Wireless LAN channel signal. You can check the current wireless connection status from the following two screens of your device. • • 100 Today screen. If your device detects a WLAN network connection, the WLAN connection icon appears at the top of the Today screen and a “W” icon appears at the bottom-right corner of the screen. Wireless LAN Main screen. The current connection status and signal quality for each specific wireless channel appears on the Wireless LAN Manager screen with the current configuration. | Getting Connected • Note Configure Wireless Networks screen. This screen displays the wireless networks currently available and allows you to add new ones if available. WLAN (Wi-Fi) is the default wireless channel setting for your device. However, GPRS starts by default if your device does not detect any WiFi signal. To connect to a Wi-Fi network Wireless Manager Wireless LAN 1. Tap Start > Settings > Connections tab > Wireless WLAN. This opens the Wireless LAN Main screen. 2. Tap to open Wireless Manager. 3. Tap On corresponding to WLAN icon ( ). The WLAN icon is highlighted to indicate that Wi-Fi is turned on. 4. Tap Note to configure and connect to a Wi-Fi network. Tap on the Wireless LAN Main screen to configure wireless networks and network adapters. Getting Connected | 101 To save battery power while connected to a Wi-Fi network 1. On the Settings tab of the Wireless LAN Main screen, move the Power Save Mode slider to a position that optimizes performance with the least power consumption. 2. Select the Auto turn off WLAN if not connected check box to allow your device to turn off the WLAN function automatically when no signal is detected. To increase security of the Wi-Fi network The LEAP (Lightweight Extensible Authentication Protocol) feature of Wireless LAN increases security on your device, and ensures that nobody is able to access your network without your permission. 1. On the Wireless LAN Main screen, tap the LEAP tab. 2. Tap New. By default, the LEAP screen displays data that you entered previously. However, you can modify or delete the data as required by tapping Modify or Delete. 3. Enter the SSID (Service Set Identifier). 4. Enter the user name, password, and domain. 5. Select an Authentication Type. By default, the Authentication Type for your device is Open System authentication. Note 102 For LEAP to work correctly, both the access point and the receiving device (your device) must be set with the same SSID, user name, and password. | Getting Connected 6.6 Using GPRS Monitor GPRS Monitor reports the amount of data transfer for any specified time period, generates a log for daily, monthly, and yearly data transfer, compares collected data against pre-defined data traffic (tariff) rates, and performs other activities that help you maintain your mobile device account. With GPRS Monitor, you can easily monitor the data traffic use and the tariff based on a data plan offered to you by a service provider. To specify the connection to be monitored GPRS Monitor Options for Main Profile, Connection 1. On the device, tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Connection tab, select the Enable connection monitoring check box. 4. In the Connection list, tap the connection you want to monitor. GPRS Monitor supports multiple profiles. If you are usually in the Roaming profile, you might want to consider setting up several profiles, each representing a single provider or tariff. Getting Connected | 103 To specify the service plan offered by your GPRS service provider GPRS Monitor Options for Main Profile, Tariff GPRS Monitor Options for Main Profile, Tariff Details 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Tariff and Tariff Details tabs, enter the appropriate information. Note GPRS Monitor calculates the network connection costs based on your information. However, the calculation done by your device GPRS Monitor is only an estimate. The actual amount charged by your service provider may differ. To set the display to monitor data connection charges 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Icon tab, select the Show Taskbar Icon check box. 4. Tap Customize. 5. On the Icon Bar tab, select the data that you want GPRS Monitor to display. 104 | Getting Connected Note There are five bars that allow you to display the information: Speed, Session Traffic, Day Traffic, Month Traffic, and Battery. If you want the bar to reset after it is full, select the Reset bar when full check box. Limit data connection charges To limit data connection charges, you can set up traffic limit notifications on your device and be notified when a traffic limit is reached. You can specify a maximum of three daily and three monthly limits. The traffic amount is specified in megabytes, kilobytes, or in the form of a percentage of the daily or monthly use. Once traffic reaches one of these limits, you will receive a notification that the limit has been reached. To set up traffic limit notifications 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Day warn and Month warn tabs, enable warnings. Run GPRS Monitor GPRS Monitor provides you with reports on your network connection usage. You can see charts and reports for the traffic and cost, and export these reports to CSV files that you can open with Excel, Access, and similar spreadsheet and database software. To use the taskbar icon 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Icon tab, select the Show taskbar icon check box. The GPRS Monitor taskbar icon displays the following information by default: • GPRS connection speed. The full bar corresponds to 19 KB per second. • GPRS data block usage. The full bar corresponds to 100%, while each item is 20%. Getting Connected | 105 • Battery status. Each bar corresponds to 20% of the total charge. 4. Adjust the slider to set the icon’s position on the taskbar. To customize the GPRS Monitor Today plug-in 1. Tap Start > Settings > Personal tab > Today. 2. On the Items tab, tap GPRS Monitor. 3. Tap Options. The following configuration options are available on the Display tab: • Refresh every ... seconds. Defines the update frequency of the plug-in indicators. • Traffic status for. Lets you select options for displaying traffic amounts/costs for today, this week, this month, or the current session. • • Traffic cost. Displays the cost and traffic status. Current connection speed. Displays the current connection speed. You can also see the following items on the GPRS Monitor Today plug-in, if selected on the Additional Items tab: • Brightness Panel. Lets you control the brightness of the backlight. • • Battery Panel. Lets you set your device power settings. Connection Status icon. Indicates whether your connection is active or has ended, and lets you connect or disconnect. • Internet Explorer icon. Lets you open Internet Explorer Mobile by tapping the icon. • Inbox icon. Lets you open Inbox by tapping the icon. To get a pop-up notification for data connection information A pop-up window appears when you tap the taskbar icon on the GPRS Monitor screen. It provides you instant access to the draft statistics of your network connection. By default, it displays the statistics of the current day. However, you can configure the screen to display the current session or past week’s session by following these steps: 106 | Getting Connected 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. On the Popup tab, select the appropriate setting. Tap the GPRS Monitor icon on the taskbar to get detailed information such as: • Traffic (for the session, day, or week, depending on your settings) • Costs (for the session, day, or week, depending on your settings) • Data block usage (shows how much of the current data block you have already transferred) • Current speed • Day inclusive amount left • Month inclusive amount left • Connection usage graph for the past 7 days The pop-up window also contains information about the current profile, and allows you to establish and end the GPRS connection. You can tap the graph and see detailed charts, or tap the profile to change it. If you tap the battery or backlight bar, the corresponding Settings screen will be shown. To change profiles Although you can use a different connection while roaming, configuring your device to handle different situations with the same connection is possible. GPRS roaming charges vary from one wireless service provider to another. Therefore, it is feasible to activate profiles within GPRS Monitor to measure the connection differently in these situations. 1. Tap Start > Programs > GPRS Monitor. 2. Tap Tools > Options. 3. In Profiles, specify the desired settings. You can modify active profiles, rename them, and clear traffic history for a certain profile. Getting Connected | 107 If you want to set all your profiles to use different connections, select the Auto change profile check box. This allows GPRS Monitor to automatically change profiles based on what connection you use. After you select a profile for the first time, make sure you configure its settings, tariff details, and so on. View Charts and Reports GPRS Monitor provides a Report Generation tool. You can use this tool to generate detailed text reports of your network connection usage for a given period of time. You can also view charts and reports for traffic and cost, and export these reports to CSV files that you can open with Excel, Access, and similar spreadsheet and database software. To view charts and generate reports • Tap Start > Programs > GPRS Monitor > Chart tab to view a network connection costs chart. • 108 Tap Start > Programs > GPRS Monitor > Report tab to generate reports on network traffic and tariff. | Getting Connected 6.7 Using Terminal Services Client The Terminal Services Client allows you to log on to a PC running Terminal Services or Remote Desktop, and use all the resources available on that PC. For example, instead of running Word Mobile on your device, you can run the PC version of Word and access the .doc files available on that PC. Connect to a Terminal Server 1. On your device, tap Start > Programs > Terminal Services Client. 2. Enter the server name. 3. You can also select a server name in Recent servers if you have recently connected to a server. 4. Select the Limit size of server desktop to fit on this screen check box if you want to use programs that have been specifically sized for use with your device. 5. Tap Connect. Navigate within Terminal Services Client When connected to a remote server, you may notice that your device screen is displaying more than one horizontal and vertical scroll bar. Use these scroll bars to either scroll the contents on the PC, or to scroll the PC display through the Terminal Services Client window. To make sure you are scrolling the PC display through Terminal Services Client, use the five directional buttons at the bottom of the Terminal Services Client window. To better fit information on your device screen, select the Limit size of server desktop to fit on this screen check box. For best results, the programs on your desktop PC should be maximized. Getting Connected | 109 Disconnect without ending a session 1. From the Terminal Services Client screen on your device, tap Start > Shutdown. 2. Tap Disconnect. Notes Do not use the Start menu on your device. If a network administrator has configured Terminal Services Client on your device to reconnect to disconnected sessions, and you previously disconnected from a Terminal Server without ending the session, the Terminal Services Client reconnects to that session. Disconnect after ending a session 1. From the Terminal Services Client screen on your device, tap Start > Shutdown. 2. Tap Log Off. 110 | Getting Connected Chapter 7 Exchanging Messages and Using Outlook 7.1 E-mail and Text Messages 7.2 Using MMS Messages 7.3 Pocket MSN Messenger 7.4 Calendar 7.5 Contacts 7.6 Tasks 7.7 Notes 7.1 E-mail and Text Messages Messaging is where all of your e-mail accounts and your text message account are located. You can send and receive Outlook e-mail, Internet e-mail through an Internet service provider (ISP), and text messages. You can also access e-mail from work using a VPN connection. For more information about e-mail and text messages, see Help on the device. To set up an e-mail account You need to set up an e-mail account that you have with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account) before you can send and receive mail. 1. Tap Start > Messaging. 2. Tap Menu > Tools > New Account. 3. Enter your e-mail address, and tap Next. Auto configuration attempts to download necessary e-mail server settings so that you do not need to enter them manually. 4. Once Auto configuration has finished, tap Next. 5. Enter your name (the name you want displayed when you send e-mail), user name, and password; tap Next. Select the Save Password check box if you want to save your password so that you do not need to enter it again. If Auto configuration was successful, the Your name and User name fields automatically get populated. Tap Next, and then Finish to complete setting up your account, or tap Options to access additional settings. For example: • Change the time intervals for downloading new messages. • Limit the amount of messages that are downloaded and authentication method for outgoing mails. • Download attachments or parts of messages. If Auto configuration is unsuccessful or you have an account you access using a VPN server connection, contact your ISP or network administrator for the following information and enter it manually: 112 | Exchanging Messages and Using Outlook Setting User name Password Domain Account type Account name Incoming mail server Outgoing mail server Require SSL connection Outgoing mail requires authentication Use separate settings Outgoing server settings: User name Password Domain Require SSL for outgoing mail Tip Description Enter the user name assigned to you by your ISP or network administrator. This is often the first part of your e-mail address, which appears before the at sign (@). Choose a strong password. You have the option to save your password so you do not need to enter it each time you connect to your e-mail server. Not required for an account with an ISP. May be required for a work account. Select POP3 or IMAP4. Enter a unique name for the account, such as Work or Home. This name cannot be changed later. Enter the name of your e-mail server (POP3 or IMAP4). Enter the name of your outgoing e-mail server (SMTP). Select this to ensure that you always send e-mail from this account using an SSL connection. This enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you will not be able to send e-mail. Select this if your outgoing e-mail server (SMTP) requires authentication. Your user name and password from above will be used. Select this if your outgoing e-mail server requires a different user name and password than the ones you entered before. Enter your user name for the outgoing e-mail server. Enter your password for the outgoing e-mail server. Enter the domain of the outgoing e-mail server. Select this to ensure you always send e-mail from this account using an SSL connection. This enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you will not be able to send e-mail. You can set up several e-mail accounts in addition to your Outlook Email account. Exchanging Messages and Using Outlook | 113 To compose and send a message 1. In the message list, tap Menu > Switch Accounts and select an account. 2. Tap New. 3. Enter the e-mail address or text message address of one or more recipients, separating them with a semicolon. To access addresses and phone numbers from Contacts, tap To. 4. Enter your message. To quickly add common messages, tap Menu > My Text and tap a desired message. 5. To check the spelling, tap Menu > Spell Check. 6. Tap Send. Tips To enter symbols, tap Shift using the on-screen keyboard. To set the priority, tap Menu > Message Options. If you are working offline, e-mail messages are moved to the Outbox folder and will be sent the next time you connect. If you are sending a text message and want to know if it was received, before sending the message, tap Menu > Tools > Options. Tap Text and select the Request delivery notification check box. To reply to or forward a message 1. Open the message and tap Reply, or Menu > Reply All, or Menu > Forward. 2. Enter your response. To quickly add common messages, tap Menu > My Text and tap a desired message. 3. To check the spelling, tap Menu > Spell Check. 4. Tap Send. Tips To see more header information, scroll up. To always include the original message, from the list view, tap Menu > Tools > Options > Message tab, and select the When replying to e-mail, include body check box. 114 | Exchanging Messages and Using Outlook In the Outlook E-mail account, you will send less data if you do not edit the original message. This may reduce data transfer costs based on your rate plan. To add an attachment to a message 1. In an open message, tap Menu > Insert and tap the item you want to attach: Picture, Voice Note, or File. 2. Select the file you want to attach, or record a voice note. To receive attachments An attachment sent with an e-mail message or downloaded from the server appears below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded, or marks it for download the next time you send and receive e-mail. You can also download attachments automatically with your messages if you have an Outlook E-mail or IMAP4 E-mail account. If you have an Outlook E-mail account, do the following: 1. Tap Start > ActiveSync. 2. Tap Menu > Options. 3. Tap E-mail > Settings, and then select Include File Attachments. If you have an IMAP4 E-mail account with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account), do the following: 1. 2. 3. 4. 5. Tip Tap Start > Messaging. Tap Menu > Tools > Options. Tap the name of the IMAP4 account. Tap Next until you reach Server information, and tap Options. Tap Next twice, and select Get full copy of messages and When getting full copy, get attachments. To store attachments on a storage card rather than on the device, tap Menu > Tools > Options > Storage tab, and select the Store attachments on a storage card check box. Exchanging Messages and Using Outlook | 115 Downloading messages The manner in which you download messages depends the type of account you have: • To send and receive e-mail for an Outlook E-mail account, begin synchronization through ActiveSync. For more information, see "Synchronizing Outlook information" in Chapter 4. • To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), download messages through a remote e-mail server. For more information, see "To download messages from the server" later in this chapter. • Text messages are automatically received when your phone is turned on. When your phone is turned off (in flight mode), messages are held by your service provider until the next time your phone is turned on. To download messages from the server To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), you first need to connect to the Internet or your corporate network, depending on the account. 1. Tap Menu > Switch Accounts and tap the account you want to use. 2. Tap Menu > Send/Receive. The messages on your device and e-mail server are synchronized: new messages are downloaded to the device Inbox folder, messages in the device Outbox folder are sent, and messages that have been deleted from the server are removed from the device Inbox folder. Tips 116 If you want to read the entire message, tap Menu > Download Message while in the message window. If you are in the message list, tap and hold the message, and tap Menu > Download Message. The | Exchanging Messages and Using Outlook message will download the next time you send and receive e-mail. This will also download message attachments if you selected those options when you set up the e-mail account. Managing folders Each Messaging account has its own folder hierarchy with five default Messaging folders: Inbox, Outbox, Deleted Items, Drafts, and Sent Items. The messages you receive and send through the account are stored in these folders. You can also create additional folders within each hierarchy. The Deleted Items folder contains messages that have been deleted on the device. The behavior of the Deleted Items and Sent Items folders depends on the Messaging options you have chosen. If you use an Outlook E-mail account, e-mail messages in the Inbox folder in Outlook will be synchronized automatically with your device. You can select to synchronize additional folders by designating them for synchronization. The folders you create and the messages you move will then be mirrored on the e-mail server. For example, if you move two messages from the Inbox folder to a folder named Family, and you have designated Family for synchronization, the server creates a copy of the Family folder and copies the messages to that folder. You can then read the messages while you are away from your PC. If you use a text message account, messages are stored in the Inbox folder. If you use a POP3 account and you move e-mail messages to a folder you created, the link is broken between the messages on the device and their copies on the e-mail server. The next time you connect, the e-mail server will detect that the messages are missing from the Inbox folder on the device and will delete them from the e-mail server. This prevents having duplicate copies of a message, but it also means that you will no longer have access to messages that you move to folders created from anywhere except the device. If you use an IMAP4 account, the folders you create and the e-mail messages you move are mirrored on the e-mail server. Therefore, messages are available to you anytime you connect to your e-mail Exchanging Messages and Using Outlook | 117 server, whether it is from your device or PC. This synchronization of folders occurs whenever you connect to your e-mail server, create new folders, or rename/delete folders when connected. You can also set different download options for each folder. 7.2 Using MMS Messages Creating and sharing MMS messages with your friends and family is easy with your device. You can even use the device camera to capture photos and video clips while composing a new MMS message, and send them along with your message. Set up MMS To access MMS • To access MMS directly, tap Start > Programs > Messaging. Note You can also send an MMS message directly from the Pictures & Videos or Camera programs. Do one of the following: • Select a picture from My Pictures, and tap Menu > Send. In Select an account, tap MMS. • Capture a photo or an MMS video clip using the camera, and tap Send. In Select an account, tap MMS. To set up an MMS account • To set up your default MMS Messaging account, tap Start > Messaging > Menu > Switch Accounts > MMS. 118 | Exchanging Messages and Using Outlook Messaging Accounts Manage MMS messages To start composing an MMS message You can compose MMS messages in a combination of various slides, where each slide can consist of a photo, audio or video clip, and/or text. 1. Tap Start > Messaging > New. 2. On the Choose a Media Message screen, select a template from the list of predefined templates. If you prefer to always use a blank MMS message, select the Always choose custom check box. Note At any time, you can choose a template from the template list by tapping Edit > New from Template on the blank MMS message screen. 3. In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts. 4. Enter a subject for your message. 5. Tap to select and send a photo or video clip. Exchanging Messages and Using Outlook | 119 6. Enter text and insert audio clips by tapping the respective areas. 7. Tap Send to send the message. Note The following icons act as shortcuts to some of the operations on the MMS Message screen: • Tap • Tap • Tap New MMS to preview your message to go to the previous slide to go to the next slide A MMS which is ready to be sent To create an MMS message from a template • Tap Edit > New from Template to compose a message using a predefined template. Note 120 To save a message as a template, open the message and tap Edit > Save as Template. | Exchanging Messages and Using Outlook To set advanced options for an MMS message • Tap Options > Background to choose a background color from the list. • Tap Options > Text on Top to align the included text to appear at the top of the message. • Tap Options > Text Below to align the included text to appear at the bottom of the message. • Tap Options > Message Options to configure and manage the sending time, validity, priority, class, and other settings for a message. To insert a photo or video clip into an MMS message You can add either a still image or a video clip to each individual slide on the MMS message screen. 1. Tap to insert a photo or video clip. The My Pictures folder opens by default with the thumbnail view ( ) of the pictures. To navigate to any other folder containing pictures or videos, tap the Down arrow corresponding to My Pictures folder. 2. Select a photo or video clip, and tap to view it. 3. Tap to insert the photo or video clip. You can discard this photo or video clip by tapping . To capture a new photo or video clip and send it immediately with the message, tap or . The newly captured photo or video clip is automatically inserted into your message. Note Pressing and holding the stylus on a thumbnail displays a shortcut menu with the options File Info and Delete. Choosing File Info displays the file information for a photo or video clip, while choosing Delete removes the selected photo or video clip. Exchanging Messages and Using Outlook | 121 Media Selection Screen Canned Text Selection To add predefined text strings to an MMS message You can instantly add text to any slide from a list of predefined words or phrases, called Canned Text. • Note Tap to add a text string from the Canned Text list. To edit or delete a phrase on the Canned Text list, tap and hold a string and tap Edit or Delete from the shortcut menu. To create and add a new phrase to the list, tap New. To add an audio clip to an MMS message You can add audio clips to your MMS message. However, you can add only one audio clip per slide. • • 122 Tap Tap here to insert an audio clip. The My Sounds folder opens by default with a list of existing audio clips. To navigate to another folder containing audio clips, tap the Down arrow corresponding to My Sounds folder. Select an audio file and tap , and to play, pause, and stop the audio clip and listen to it. To insert the file into your MMS message, tap | Exchanging Messages and Using Outlook • To record a new audio clip and add it to your MMS message, tap . This activates the recording control mode for a new audio clip. Tap to start recording and to stop recording. The new audio clip is automatically inserted into your MMS message. To reply to an MMS message • Tap Menu > Reply to reply to the sender of the message, or tap Menu > Reply All to reply to all persons listed in To, Cc, and Bcc of the message. To view an MMS message You can view MMS messages in several ways. • Use the playback controls , and • Tap Objects to see a list of files included in the message. To save a file, select it, and tap Tools > Save. • View the slides manually by scrolling through the message using the NAVIGATION control. Change MMS settings You can set options to keep track of your messages, retrieve messages immediately, accept or reject messages, and request a delivery or read receipt. You can also specify a resolution for images you send, message delivery attempts, and set up a server to access messages. To configure MMS settings 1. Tap Start > Programs > Messaging > Menu > MMS Configuration. 2. Select any of the following: • Retrieve messages immediately. Select this check box to download new messages automatically without being notified. (Typically, when you are connected to a network, you receive a notification whenever you receive a new message.) You can also choose to download messages when you are on your home network only. Exchanging Messages and Using Outlook | 123 • Save sent messages. Select this check box to save a copy of messages that you send. • Reject all messages. Select this check box so all incoming MMS messages are not downloaded. • Allow delivery report and Allow read report. Select these check boxes to send and receive delivery and read reports. • Attempts before giving up. Select a value from this list to limit the number of times the program attempts to send your message. • Photo resolution. Select a value from this list to choose the resolution for images that you send. Decreasing the original resolution helps speed up the sending and receiving of messages. Servers. On this tab, you can create a new server or select an existing one from the list to store and manage your messages. You can also set a server as default by tapping Set As Default. • Configurate MMS 124 | Exchanging Messages and Using Outlook 7.3 Pocket MSN Messenger MSN Messenger delivers the features of MSN Messenger to your mobile device. With Pocket MSN Messenger you can do the following: • • • Send and receive instant messages. See which contacts are online or offline. Subscribe to status updates for selected contacts so you know when they come online. • Block contacts from seeing your status or sending you messages. Before you can use MSN Messenger, your device must be connected to the Internet. For information about setting up an Internet connection, see “Connecting to the Internet” in Chapter 6, “Getting Connected.” Note You must have either a Microsoft .NET Passport or Hotmail account to use MSN Messenger. If you have a Hotmail.com or MSN.com e-mail address, you already have a Passport. To get a Passport account, go to http://www.passport.com. To get a Hotmail account, go to http://www. hotmail.com. To start MSN Messenger 1. Tap Start > Programs > Pocket MSN. 2. Tap MSN Messenger. To sign in or out • To sign in, tap anywhere on the MSN Messenger screen. Enter the e-mail address and password for your Passport or Hotmail account, and tap Sign In. Signing in may take several minutes, depending on your connection speed. • To sign out, tap Menu > Sign Out. Your status changes to Offline. Exchanging Messages and Using Outlook | 125 To add or delete contacts • To add a contact, tap Menu > Add a Contact, and follow the instructions on the screen. • To delete a contact, tap and hold the contact's name, and tap Delete Contact. To send an instant message 1. Tap the contact to whom you want to send a message. 2. Enter your message in the text entry area at the bottom of the screen, and tap Send. Tip To quickly add common phrases, tap Menu > My Text and select a phrase in the list. To block or unblock contacts • To block a contact from seeing your status and sending you messages, tap and hold the contact, and tap Block. • To unblock a contact, tap and hold the name of the blocked contact, and tap Unblock. To check your own Messenger status • Tap and hold your own name at the top of the page. Your current status is indicated in the displayed list by a bullet point. To change your display name 1. Tap Menu > Options > Messenger tab. 2. Enter the name you want to display to others in MSN Messenger. To get more help about MSN Messenger • From within MSN Messenger, tap Start > Help. 126 | Exchanging Messages and Using Outlook 7.4 Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example. You can look at your appointments in several different views (Day, Week, Month, Year, and Agenda). To see detailed appointment information in any view, tap the appointment. To schedule an appointment 1. Tap Start > Calendar. 2. Tap Menu > New Appointment. 3. Enter a name for the appointment, and enter information such as start and end times. 4. To schedule an all-day event, in the All Day box, tap Yes. 5. When finished, tap OK to return to the calendar. Notes All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar. To cancel an appointment, tap the appointment and tap Menu > Delete. Tip To have the time entered automatically in Day view, tap the time slot for the new appointment, and tap Menu > New Appointment. To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Tap Start > Calendar. 2. Schedule a new appointment, or open an existing one and tap Edit. 3. Tap Attendees. 4. Tap the name of the contact you want to invite. 5. To invite each additional attendee, tap Add and tap the name. Exchanging Messages and Using Outlook | 127 6. Tap OK. 7. The meeting request will be sent to the attendees the next time you synchronize your device with your PC. Note When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well. To set a default reminder for all new appointments You can have a reminder automatically turned on for all new appointments you schedule. 1. 2. 3. 4. 5. 128 Tap Start > Calendar. Tap Menu > Options > Appointments tab. Select the Set reminders for new items check box. Set the time when you want the reminder to alert you. Tap OK to return to the calendar. | Exchanging Messages and Using Outlook 7.5 Contacts Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact. From the contact list, you can quickly communicate with people. Tap a contact in the list for a summary of contact information. From there, you can call or send a message. If you use Outlook on your PC, you can synchronize contacts between your device and PC. To create a contact 1. Tap Start > Contacts. 2. Tap New and enter the contact information. 3. When finished, tap OK. Tips If someone who is not in your list of contacts calls you or sends you a message, you can create a contact from Call History, or from the message by tapping Menu > Save to Contacts. In the list of contact information, you’ll see where you can add a picture or assign a ring tone to a contact. To change contact information 1. Tap Start > Contacts. 2. Tap the contact. 3. Tap Menu > Edit and enter the changes. 4. When finished, tap OK. To work with the contact list There are several ways to use and customize the contact list. Here are a few tips: 1. Tap Start > Contacts. 2. In the contact list, do any of the following: Exchanging Messages and Using Outlook | 129 • In Name view, you can search for a contact by entering a name or number, or by using the alphabetical index. To switch to Name view, tap Menu > View By > Name. • To see a summary of information about a contact, tap the contact. From there you can also make a call or send a message. • To see a list of available actions for a contact, tap and hold the contact. • To see a list of contacts employed by a specific company, tap Menu > View By > Company. Then, tap the company name. To find a contact There are several ways to find a contact when your contact list is long. 1. Tap Start > Contacts. 2. If you are not in Name view, tap Menu > View By > Name. 3. Do one of the following: • Begin entering a name or phone number in the provided text box until the contact you want is displayed. To show all contacts again, tap the text box and clear the text, or tap the arrow to the right of the text box. • Use the alphabetical index displayed at the top of the contact list. • 130 Filter the list by categories. In the contact list, tap Menu > Filter. Then tap a category you’ve assigned to a contact. To show all contacts again, select All Contacts. | Exchanging Messages and Using Outlook 7.6 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task 1. Tap Start > Programs > Tasks. 2. Tap New, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3. When finished, tap OK. Tip You can easily create a short, to-do-type task. Simply tap the Tap here to add a new task box, enter a subject, and press ENTER. If the task entry box is not available, tap Menu > Options and select the Show Tasks entry bar check box. To change the priority of a task Before you can sort tasks by priority, you need to specify a priority level for each task. 1. 2. 3. 4. Note Tap Start > Programs > Tasks. Tap the task you want to change the priority for. Tap Edit and in the Priority box, tap a priority level. Tap OK to return to the task list. All new tasks are assigned a Normal priority by default. Exchanging Messages and Using Outlook | 131 To set a default reminder for all new tasks You can have a reminder automatically turned on for all new tasks you create. 1. 2. 3. 4. Note Tap Start > Programs > Tasks. Tap Menu > Options. Select the Set reminders for new items check box. Tap OK to return to the task list. The new tasks must have due dates set in order for the reminder to take effect. To show start and due dates in the task list 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Show start and due dates check box. 4. Tap OK. To locate a task When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap Start > Programs > Tasks. 2. In the task list, do one of the following: • Sort the list. Tap Menu > Sort by, and tap a sort option. • Filter the list by category. Tap Menu > Filter, and tap the category you want displayed. Tip 132 To filter your tasks further, tap Menu > Filter > Active Tasks or Completed Tasks. | Exchanging Messages and Using Outlook 7.7 Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. Entering information in Notes There are several ways to enter information in a note. You can enter typed text by using the on-screen keyboard or handwriting recognition software. You can also use the stylus to write or draw directly on the screen. On devices that support recording, you can create a standalone recording or embed a recording in a note. To set the default input mode for Notes If you frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, select Typing. 1. Tap Start > Programs > Notes. 2. In the note list, tap Menu > Options. 3. In the Default mode box, tap one of the following: • Writing if you want to draw or enter handwritten text in a note. • Typing if you want to create a typed note. 4. Tap OK. To create a note 1. Tap Start > Programs > Notes. 2. In the note list, tap New. 3. Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text. 4. If the Input Selector arrow is not displayed, tap the Input Method icon. 5. When finished, tap OK to return to the note list. Exchanging Messages and Using Outlook | 133 To record a note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. Do one of the following: • To create a stand-alone recording, record from the note list. • To add a recording to a note, create or open a note. 3. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 4. Tap to begin recording. 5. Hold your device’s microphone near your mouth or other source of sound. 6. Tap when finished recording. 7. When finished, tap OK to return to the note list. If you are recording in an open note, an icon will appear in the note. If you are creating a stand-alone recording, an icon will appear in the note list. 134 Note To play a recording, tap the Recording icon in the open note or tap the recording in the note list. Tip To quickly create a recording, press the RECORD hardware button. When you hear the beep, begin your recording. Release the button when you are finished. | Exchanging Messages and Using Outlook Chapter 8 Experiencing Multimedia 8.1 Using Camera 8.2 Using Pictures & Videos 8.3 Using Windows Media Player 8.1 Using Camera Taking photos and shooting video clips along with audio is easy with your device’s built-in camera and camcorder. Your device has a built-in camera ( ) . The camera operates with the full-screen resolution. To switch to any of the Camera modes on your device, do any of the following: • Tap Start > Programs > Camera. • Press the CAMERA button on your device. To exit the Camera screen, tap Use the camera The camera on your device allows you to capture pictures and video clips by using various built-in modes with flexibility. The Camera mode, while using the camera, is set to the Photo capture mode by default. The lower right corner of the screen displays the active capture mode. To switch to other capture modes, do any of the following: • • • Tap or on the Camera screen. Press the Right and Left arrow keys on the hardware keyboard. Use the NAVIGATION control on your device. Using the above capture modes, the camera in your device captures files in the following formats: 136 Capture type Format Still image BMP, JPEG Video Motion-JPEG AVI (.avi), MPEG-4 (.mp4) MMS Video H.263 baseline (.3gp), MPEG-4 (.mp4) Burst / Sport JPEG | Experiencing Multimedia The available capture modes of the camera are as follows: Capture mode Function Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. MMS Video Captures video clips suitable for sending via MMS. Contacts Picture Captures a still image and gives you the option to immediately assign it to a Photo ID for a contact. Picture Theme Captures still images and places them within frames. Panorama Captures a sequence of still images continuously in one direction, and allows stitching of all images to create a collage. Sport Captures a sequence of still images (5 ~ 30) automatically for a short duration at a defined frequency. Burst Captures a sequence of still images (maximum 30) as long as the CAMERA button or the ENTER button on the NAVIGATION control is kept pressed. Use shortcuts in Camera mode While in Camera mode, you can use the following buttons and icons on your device as a shortcut when performing operations. Photo Mode Video Mode Camera mode icons • • Current time indicator. 8:13 Displays the current time. Remaining information indicator. Displays the remaining, available shots of pictures based on current settings. Experiencing Multimedia | 137 • Resolution indicator. resolution. • Ambience indicator. ambience. • Zoom-Ratio indicator. 2.0x/1.0x Indicates the current zooming ratio. • Zoom-Ratio Switching button. Tapping and on the Camera screen zooms in and zooms out the preview. • Self-Time indicator. Indicates the current setting of SelfTimer while capturing images or videos. • Mode Switching button. Tapping and on the Camera screen switches from the current capture mode to previous ( or next ( ) capture mode. • Capture Status indicator. After you press the CAMERA button or the ENTER button on the NAVIGATION control, indicates that the camera is processing and saving the captured picture, or recording a video clip. Previous/Next Template button. Tap to display the previous sequential template; tap to display the next sequential template. • • • • 138 Indicates the current Indicates the current Reset Status button. Tap to stop the current Panorama capture progress and revert to normal preview. The button is active if the Auto-stitch the snapped images while in Panorama mode check box on the Camera Settings screen is not be selected. Exit. Tap to exit the Camera program. Camera Settings. Tap to open the Camera Settings screen. Tap OK to return to Camera mode. • Flash. Tap to turn on the camera flash while capturing an image. Tap again to turn off the flash ( ). • Picture Viewer. Tap Videos. • Camera. Tap | Experiencing Multimedia to view the picture or video in Pictures & to start the camera. Still Image Review with Time Stamp Review mode icons Video Review • Back to Preview. Tap an image. • Send. Tap MMS. • • Delete. Tap to remove the captured image. View in Pictures. Tap to switch to Pictures & Videos program. The captured image will be displayed in the Detailed View. • View in Windows Media. Tap to switch to Windows Media Player to play back the new video you just recorded. • Assign to Contacts. Tap a contact in the contact list. to go back to Camera mode to capture to send the captured image to someone via e-mail/ to send the new file immediately to ENTER button Press the ENTER button on the NAVIGATION control to take a picture when you are capturing still image. Press this button to start recording an incoming video stream; press it again to stop recording. NAVIGATION control Press NAVIGATION up or down to increase or decrease the zoom level. Press NAVIGATION left or right to go to the previous next or sequential capture mode. Experiencing Multimedia | 139 CAMERA button Press the CAMERA button to switch to Camera mode. If already in Camera mode, press once to take a still image or to start recording a video clip. In Photo capture mode, point your device and press this button to capture more still images. Use Still Image capture modes While using Still Image capture modes, such as Photo, Contacts Picture, Picture Theme, Panorama, Sport, and Burst, you can capture a single still image by pressing the CAMERA button or the ENTER button on the NAVIGATION control. The Still Image capture modes support either BMP or JPEG format, as specified by you on the Camera Settings screen. While capturing an image in the Picture Theme capture mode, you can select a built-in template from the default template folder. To browse and select different templates, tap , , or tap and select a template from the Camera Settings screen. Use Video capture mode While using the Video capture mode, you can press the ENTER button or the CAMERA button on your device to start recording a video clip (with audio if desired). To stop recording, press the ENTER button or CAMERA button again. Your device displays the first frame of the captured video clip by default on the Review screen. Before you capture a video clip, you can specify the recording limit in terms of time and file size on the Camera Settings screen so that the recording stops automatically when the clip size reaches that limit. You can set the capture format to either Motion-JPEG AVI or MPEG-4 on the Camera Settings screen. Use MMS Video capture mode The MMS Video capture mode offers additional options that make it convenient for you to capture a video file and then send it via MMS. Press the ENTER button or the CAMERA button on your device to start 140 | Experiencing Multimedia recording a video clip (with audio if desired). To stop recording, press the ENTER button or CAMERA button again. To limit the size of the video that you plan to send through MMS, there is a fixed, preset file size specified for videos captured using the MMS Video mode. The recording process automatically stops when this limit is reached. However, you can stop recording the video manually before the specified limit is reached. The digital time indicator on the bottom left corner of the screen indicates the time limit in seconds. You can specify the capture format to be either H.263 or MPEG-4 on the Camera Settings screen; however, the ideal format for MMS is H.263 (3GPP). After you capture the video file, tap on the Review screen to send the file through MMS. Use the Review screen To access the icons on the Review mode screen 1. In Camera mode, tap Tools > Options > General tab. 2. Select the Review after capture check box. Note that this check box is selected by default to allow you to review the image or video clip after it has been captured. Use zooming While capturing a still image or a video clip by using the camera, you can zoom in to make the object in focus move closer, and you can zoom out to make the object move farther away. In all capture modes, use NAVIGATION on your device, or tap the triangular Up arrow next to the Zoom Ratio indicator, to zoom in a still image or an incoming video stream. When the zooming limit is reached, you will hear a beep. To zoom out, press NAVIGATION down, or tap the Down arrow. The camera zoom range for a picture or a video clip depends on the capture mode and capture size. Following is a summary. Experiencing Multimedia | 141 Capture mode Capture size setting Zoom range Video and MMS Video Large (320 x 240) 1.0x to 2.0x Medium (176 x 144) 1.0x to 2.0x Small (128 x 96) 1.0x to 2.0x Photo and Contacts Picture 2M (1600 x 1280) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x Picture Theme Determined by the current template Depends on the size of the template currently loaded Panorama Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x 1M (1280 x 1024) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x Sport Burst Note 142 No zooming available 1M (1280 x 1024) The capture sizes available for certain capture formats also vary from one capture mode to another. The zoom range has been calculated based on the following ratio: • 1.0x = normal size (no zooming) • 2.0x = double enlargement • 4.0x = quadruple enlargement • 8.0x = octuple enlargement | Experiencing Multimedia Use the Camera Settings screen While capturing a still image or video clip using any capture modes, tap to access the Camera Settings screen. The Camera Settings screen allows you to configure the capture settings. Following is an illustration of the Camera Settings screen. Camera Settings You can configure the following settings on the Camera Settings screen. Setting Allows you to Capture mode Select a capture mode Capture format Select a capture format Capture size Select a capture size Capture frequency Select a capture frequency Record limitation Specify the maximum time or file size for recording Template Select a template Browse Navigate to a folder containing templates Direction Select a capture direction Stitch count Select a count of snapped images Burst count Select a count of automatic capturing Ambience Select an ambience type After you configure settins, tap OK or Start Camera on the Camera Settings screen to go back to the Camera screen. Experiencing Multimedia | 143 Use the Tools menu The Tools menu on the Camera Settings screen provides the following advanced options for configuring and customizing the Camera mode functions. Camera Settings, Tools Adjust. Tap Tools > Adjust to adjust the camera display properties, such as Contrast, Brightness, Saturation, Hue, and Sharpness. Select one of these properties from the list and move the slider (or tap the slider) to change the value. The preview window on the Adjust screen displays the effect of changes you make on the Adjust screen. Tap OK to save the settings. Note You can tap Reset at any time to reset all properties to their default. Camera Options, General 144 | Experiencing Multimedia Options. Tap Tools > Options to display the Options screen with the following three tabs: • General tab. The General tab includes the following options: • Disable shutter sound. Select this check box to disable all default sounds played while capturing a still image or recording a video clip. • • Keep backlight on while in viewfinder. Select this check box to ensure that the backlight remains turned on while you view the incoming video stream, overriding your device backlight settings. Review after capture. Select this check box to display the captured image immediately after you take a picture. The Review screen provides options for performing various operations on the new file. Clearing this check box saves any newly captured file using the default file name, and returns to the Camera screen. • Apply “Date and time stamp” while capturing images. Select this check box to automatically compose the current date and time in the captured images. • Flicker Adjustment. Select Auto to set the electrical voltage of the country where the device is being used. • Save to. Select where you want to save your captured files. You can either save the files to main memory or to a storage card. Camera Options, Image Experiencing Multimedia | 145 • Image tab. The Image tab provides image-related settings for captured files. • Prefix type and Prefix string. By default, the file name of each new captured image file is set to “IMAGE” followed by a sequential number, for example: IMAGE_00001.jpg. To change this prefix, select String in the Prefix type list, and enter the desired characters in the Prefix string box. • Counter Index. By default, the newly captured image files are named with a prefix and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset the numbering to “00001” for your captured image files, tap Reset counter. JPEG Quality. Select the JPEG image quality level for all captured still images. You can choose from SuperFine, Fine, Normal, and Basic. • • Self-Timer: Select the Self-Timer option for capturing images: Off, 5 seconds, or 10 seconds. Selecting 5 seconds or 10 seconds delays the capturing by the specified time after you press the CAMERA button on the device, or the ENTER button on the NAVIGATION control. • Auto-stitch the snapped images while in Panorama mode. When this check box is selected, the camera automatically stitches all snapped images into one single file. If you do not select this check box while capturing images in Panorama mode, the snapped images are saved as separate files. Camera Options, Video 146 | Experiencing Multimedia • Video Tab. The options on the Video tab are for configuring the advanced settings of the captured video files. • Prefix type and Prefix string. By default, the file name of each new, captured video file is set to “VIDEO” followed by a sequential number, for example: VIDEO_00001.avi. To change this prefix, select String in the Prefix type list and enter the desired characters in the Prefix string box. • Counter Index. By default, the newly captured video files are named with a prefix and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset the numbering to “00001” for your captured video files, tap Reset counter. Recording with Audio. Select this check box to record audio with the captured video clips. This check box is selected by default. If you clear this check box and then capture a video clip, it would have no audio. • 8.2 Using Pictures & Videos The Pictures and Videos program collects, organizes, and sorts images and video clips in the following formats on your device. File Type File Extensions Image Video .bmp .jpg .avi .wmv .mp4 .3gp You can view the pictures as a slide show, bean them, send them via e-mail, edit them, or set them as the background on the Today screen. To copy a picture or video clip to your device You can copy pictures from your PC and view them on your device. • Copy the pictures from your PC or a storage card to the My Pictures folder on your device. For more information about copying files from your PC to your device, see ActiveSync Help on your PC. Experiencing Multimedia | 147 Note You can also copy pictures from your PC to your device using a memory card. Insert the memory card into the memory card slot on your device, and then copy the pictures from your PC to the folder you created on the memory card. To view pictures 1. Tap Start > Programs > Pictures & Videos. The images in the My Pictures folder appear as thumbnails by default. 2. Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow. Pictures ans Videos To play videos with audio 1. Tap Start > Programs > Pictures & Videos. The videos in the My Pictures folder appear as thumbnails by default, while the audio files appear with a icon. 2. Select a video and tap the thumbnail to play it with the built-in Windows Media Player. To view slideshows You can view your pictures as a slide show on your device. Pictures are shown in full-screen view with 5-second intervals between slides. 1. Tap Start > Programs > Pictures & Videos. 2. Tap Menu > Play Slide Show. 148 | Experiencing Multimedia Note You can specify how pictures are scaled to optimize their display in a slide show. Tap Menu > Options and on the Slide Show tab, tap Portrait Pictures or Landscape Pictures. Tap anywhere on the screen to display the Slide Show toolbar, which you can use to stop or pause the slide show, rotate the view, and more. Press NAVIGATION right or left to move forward or backward through the slides. To start the camera from Pictures & Videos • Tap Camera on the Pictures & Videos screen. To sort pictures and video clips If you store a large number of pictures or video clips on your device, you may find it helpful to sort them to quickly find a specific picture or clip. You can sort by name, date, and size. 1. Tap Start > Programs > Pictures & Videos. 2. Tap the sort list (labeled Date by default), and select the item you want to sort by. To delete a picture or video clip Do any of the following to remove a picture or a video clip: • Select a picture or video clip on the Pictures & Videos screen, and tap Menu > Delete. Tap OK to confirm the deletion. • Tap and hold the thumbnail of the picture you want to delete, and tap Delete. To edit a picture or video clip You can rotate, crop, and adjust the brightness and color contrast of your pictures. 1. Tap Start > Programs > Pictures & Videos. 2. Tap the picture you want to edit. 3. Tap Menu > Edit, and do any of the following: • To rotate a picture 90 degrees counterclockwise, tap Rotate. • To crop a picture, tap Menu > Crop. Then, tap and drag to select the area to crop. Tap outside the box to stop cropping. Experiencing Multimedia | 149 • Note To adjust the brightness and contrast levels of a picture, tap Menu > AutoCorrect. To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved. To set a picture as the Today screen background You can use a picture as the background on the Today screen. 1. Tap Start > Programs > Pictures & Videos. 2. Select the picture you want to set as the background. 3. Tap Menu > Set as Today Background. 4. In Transparency level, select a higher percentage for a more transparent picture, or a lower percentage for a more opaque picture. 5. Tap OK. To send pictures and video clips via e-mail You can send pictures and video clips to other devices via e-mail. 1. First, set up Messaging to send and receive messages. 2. From the program, select the item you want to send. 3. Tap Menu > Send via E-mail. A new message is created with the item attached. 4. Enter the recipient name and subject, and tap Send. The message will be sent the next time you synchronize your device. Note Pictures and video clips are saved automatically before they are sent. To beam a picture You can beam a picture to your friends or a family member using Infrared. 1. Tap Start > Programs > Pictures & Videos. 2. Select the picture you want to beam. 3. Tap Menu > Beam. 150 | Experiencing Multimedia 4. Select a device to beam the picture. 5. Tap OK. To assign pictures to contacts You can assign a picture to a contact so that you can easily identify the contact at any point of time. 1. 2. 3. 4. Tap Start > Programs > Pictures & Videos. Select the picture you want to assign to a contact. Tap Menu > Save to Contact. Tap the contact, or navigate and tap Select to choose the contact from your Contacts list. To use advance options 1. Tap Start > Programs > Pictures & Videos. 2. Select the picture for which you want to configure further settings. 3. Tap Menu > Options. The Options screen is displayed. The Options screen allows you to do the following: • Resize a picture so that you can send it faster to someone using your e-mails. • Configure the view settings during slide shows and activate screensaver options. • Configure your device camera and camcorder settings. 8.3 Using Windows Media Player You can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site. Using Windows Media Player, you can play both audio and video files. These are the following file formats that are supported by this version of Windows Media Player. Experiencing Multimedia | 151 File Formats Supported Video • • • • • Windows Media Video MPEG4 Simple Profile H.263 Motion JPEG 3GPP2 Audio • • • • • • • Windows Media Audio MP3 MIDI AMR Narrow Band AMR Wide Band AAC 3GPP2 File Extensions .wmv, .asf .mp4 .3gp .avi .3g2 .wma .mp3 .mid, .midi, .rmi .amr .awb .m4a .gcp About the controls The following are available controls on the Pocket PC Player. This control 152 Does this This control Does this Plays a file. Increases the volume level. Pauses a file. Decreases the volume level. Skips to the beginning of the current file or to the previous file. Turns the sound on or off. Skips to the next file. Displays a video by using the entire screen (full screen). Adjusts the playback progress of a selected file. Displays a Web site where you can find music and videos to play. | Experiencing Multimedia Note If your device hardware supports it, you can rewind and fast-forward files by pressing and holding the Left/Right controls. About the screens and menus Windows Media Player has three primary screens: Playback screen. The default screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume), the album art window, and the video window. You can change the appearance of this screen by choosing a different skin. Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the currently playing file and any files that are “queued up” to play next. Library screen. The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Video, My TV, and My Playlists. At the bottom of each screen is a menu called Menu. The commands on this menu change depending upon which screen you are viewing. Playback screen menu When you are viewing the Playback screen, the following commands appear on Menu. This control Does this Play/Pause Starts or pauses playback. Repeat Plays the items in the Now Playing playlist repeatedly. Stop Stops playback. Full Screen When a video is playing, displays it by using the entire screen. Library Displays the Library screen so you can choose a file to play. Open URL Lets you play a file on a network, such as the Internet. Options Lets you adjust various Windows Media Player options, including network, skin, and hardware button options. Properties Displays information about the currently playing file. About Displays information about Windows Media Player, such as the version number. Experiencing Multimedia | 153 Now Playing screen menu When you are viewing the Now Playing screen, the following commands appear on Menu. This control Does this Library Displays the Library screen so you can choose a file to play. Move Up Moves the selected item up in the playlist order. Move Down Moves the selected item down in the playlist order. Remove from Playlist Deletes the selected item from the playlist. Clear Now Playing Deletes all items from the Now Playing playlist. Error Details Displays error information about the selected item (an exclamation mark appears before the item name if error details are available). Properties Displays information about the selected file. Library screen menu When you are viewing the Library screen, the following commands appear on Menu. 154 This command Does this Queue Up Adds the selected item to the end of the current (Now Playing) playlist. Delete from Library MDeletes the selected item from the library. Update Library Adds new items to the library by searching your device or storage card. Open File Lets you find and play files that are stored on your device or storage card but that are not in the library.. Properties Displays information about the selected file. | Experiencing Multimedia About licenses and protected files Some content (such as digital media files downloaded from the Internet, CD tracks, and videos) have associated licenses that protect them from being unlawfully distributed or shared. Licenses are created and managed by using digital rights management (DRM), which is the technology for securing content and managing its access rights. Some licenses may prevent you from playing files that have been copied to your device. Files that have licenses associated with them are called “protected files.” If you want to copy a protected file from your PC to your device, use the desktop Player to synchronize the file to your device (instead of dragging the file from a folder on your PC to a folder on your device, for example). This will ensure that the license is copied along with the protected file. For more information about synchronizing files to your device and other mobile devices, see desktop Player Help. Note You can view the protection status for a file by checking its file properties (tapping Menu > Properties). To play items on your device Use the library to find and play songs, videos, and playlists that are stored on your device or removable storage card. 1. If you are not on the Library screen, tap Menu > Library. 2. On the Library screen, tap the Library arrow (near the top of the screen), and then tap the library that you want use (for example, My Device or Storage Card). 3. Tap a category (for example, My Music or My Playlists), tap and hold the item that you want to play (such as a song, album, or artist name), and then tap Play. Note To play a file that is stored on your device but is not in a library, on the Library screen, tap Menu > Open File. Tap and hold the item that you want to play (such as a file or a folder), and then tap Play. Experiencing Multimedia | 155 To play an item on a network Use the Open URL command to play a song or video that is stored on the Internet or on a network server. 1. If you are not on the Playback screen, tap OK to close the current screen and display the Playback screen. 2. Tap Menu > Open URL. 3. Do one of the following: • In the URL box, enter a network address. • In the History box, tap a URL that you have previously used. Note To play an item on a network, you must be connected to a network. For more information about creating a remote connection between your device and a network, see Connections Help on your device. Copy files to your device Use the latest version of the desktop Player (Windows Media Player 10 or later) to synchronize digital media files to your device (instead of dragging a file from a folder on your PC to a folder on your device, for example). Using the desktop Player ensures that licenses are copied with protected files. When synchronizing files, always synchronize the files to a storage card that is inserted into your device. Do not synchronize to a storage card that is inserted into a storage card reader. In addition, do not synchronize to the internal storage location (RAM) in your device. For more information about synchronizing files to mobile devices, see desktop Player Help on the PC. Note 156 Audio files copy faster if the desktop Player is configured to automatically set the quality level for audio files copied to your device. For more information, see desktop Player Help on the PC. | Experiencing Multimedia Accessibility for people with disabilities Microsoft is committed to making its products and services easier for everyone to use. Many accessibility features have been built into Microsoft products, including features for individuals who have difficulty typing or using a mouse, who are blind or have low vision, or who are deaf or hard-of-hearing. For more information about the following topics, see the Accessibility section of the Microsoft Web site (http:// www.microsoft.com/enable/default.aspx). • Accessibility in Microsoft Windows • Adjusting Microsoft products for people with accessibility needs • Free step-by-step tutorials • Microsoft documentation in alternative formats • Assistive technology for Windows • Customer service for people who are deaf or hard-of-hearing Note The information in this section applies to users who license Microsoft products in the United States. If you obtained this product outside the United States, your package contains a subsidiary information card that you can use to contact your subsidiary about the products and services available in your area. Troubleshooting If you encounter a problem while using the Pocket PC Player, a number of resources are available to help you troubleshoot the issue. For more information, see the Troubleshooting Windows Media Player Mobile page at the Microsoft Web site (http://www.microsoft.com/ windows/windowsmedia/player/windowsmobile/troubleshooting.aspx). Experiencing Multimedia | 157 158 | Experiencing Multimedia Chapter 9 Using Other Applications 9.1 Word Mobile 9.2 Excel Mobile 9.3 Viewing Slide Shows with PowerPoint Mobile 9.4 Using ClearVue PDF 9.5 Using MIDlet Manager 9.6 Using ZIP 9.1 Word Mobile Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as .doc, .rtf, .txt, and .dot files. You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically. When you close a newly created document, it is automatically named after the first several words in the document and placed in the Word Mobile document list. You can easily rename the document with a more meaningful name and move it to another folder or a storage card. To create a file 1. In Word Mobile, tap New. 2. You’ll see either a blank document or template, depending on what you’ve selected as the default template. 3. Enter text as desired. 4. When finished, tap OK to save the file. Unsupported features in Word Mobile Word Mobile does not fully support some features of Microsoft Word such as revision marks and password protection. Some data and formatting may be lost when you save the document on your device. The following features are not supported in Word Mobile. 160 • Backgrounds • Shapes and text boxes • Artistic page borders • Smart tags • Metafiles | Using Other Applications • Bi-directional text. While Word Mobile will open documents containing bi-directional text, the indentations and alignment may be displayed and saved incorrectly. • Password-protected files. Word Mobile does not support opening password-protected documents. You must first remove the password protection in Word on the PC if you want to view the document on the device. • Document protection.Word Mobile does not support displaying files that have been protected in Word on the PC. The following features are partially supported in Word Mobile. • Picture bullets • Revision marks • Table styles • Underline styles. Underline styles not supported by Word Mobile are mapped to one of the four supported styles: regular, dotted, wavy, or thick/bold/wide. • Legacy Pocket Word files. You can open *.psw files in Word Mobile; however, if you edit a file, you will need to save it in *.doc, *.rtf, *.txt, or *.dot format. The following features are not supported on the device; however, they are retained in the file so that when a file is opened on the PC again, they appear as expected. • Footnotes, endnotes, headers, footers • Page breaks • Lists • Fonts and font sizes. Fonts not supported by the device are mapped to the closest font available, although the original font will be listed on the device. Using Other Applications | 161 To get more help about Word Mobile • From within Word Mobile, tap Start > Help. 9.2 Excel Mobile Excel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also can create new workbooks and templates on your device. Tips Work in full-screen mode to see as much of your workbook as possible. Tap View > Zoom and select a percentage so that you can easily read the worksheet. Unsupported features in Excel Mobile Excel Mobile does not fully support some features such as formulas and cell comments. Some data and formatting may be lost when you save the workbook on your device. Note the following Excel Mobile formatting considerations: • • Alignment. Horizontal, vertical, and wrap-text attributes remain the same, but vertical text appears horizontal. Borders. Appear as a single line. • Cell patterns. Patterns applied to cells are removed. • Fonts and font sizes. Fonts not supported by your device are mapped to the closest font available. The original font is listed on your device. When the workbook is opened in Excel on your PC again, the data is displayed in the original font. • Number formats. Numbers formatted using the Microsoft Excel 97 conditional formatting feature are displayed in Number format. Formulas and functions. If an Excel file contains a function that is not supported by Excel Mobile, the function is removed, and only the returned value of the function appears. The following formulas are also converted to values: formulas entered • 162 | Using Other Applications as an array or containing an array argument, for example, =SUM({1;2;3;4}); formulas containing external link references or an intersection range reference; and formulas containing references past row 16384 are replaced with #REF! • Protection settings. Most worksheet and workbook protection features are disabled but not removed. However, support for password protection has been removed. Workbooks that are password-protected or workbooks in which one or more worksheets are password-protected cannot be opened. You must remove the password protection in Excel on the PC and then synchronize to open the file on the device. • Zoom settings. Are not retained. Excel supports a per worksheet zoom setting, while the Excel Mobile zoom setting is applied to the entire workbook. • Worksheet names. Names that reference worksheets within the same workbook are displayed accurately, but names that refer to other workbooks, arrays, for example, ={1;2;3;4}, array formulas, or intersection ranges are removed from the name list. If a name is removed from the list, it is left in formulas and functions, causing those formulas to be resolved as “#NAME?” All hidden names are not hidden. • AutoFilter settings. Are removed. However, you can use the AutoFilter command in Excel Mobile to perform similar functions. If you have an AutoFilter applied to a worksheet that causes rows to be hidden, the rows remain hidden when the file is opened in Excel Mobile. Use the Unhide command to display the hidden rows. • Chart formatting. All charts will be saved the way they are shown in Excel Mobile. Unsupported chart types are changed to one of these supported types: Column, Bar, Line, Pie, Scatter, and Area. Background colors, gridlines, data labels, trend lines, shadows, 3D effects, secondary axes, and logarithmic scales are turned off. Using Other Applications | 163 • Worksheet features. The following features are not supported in Excel Mobile and are removed or modified when a workbook is opened on the device: hidden sheets are not hidden; VBA modules, macro sheets, and dialog sheets are removed and replaced with a place holder sheet; text boxes, drawing objects, pictures, lists, conditional formats, and controls are removed; pivot table data is converted to values. To get more help about Excel Mobile • From within Excel Mobile, tap Start > Help. 9.3 Viewing Slide Shows with PowerPoint Mobile With PowerPoint Mobile, you can open and view slide show presentations created on your PC in *.ppt and *.pps format with PowerPoint '97 and later. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device. If the presentation is set up as a timed slide show, one slide will advance to the next automatically. Links to URLs are also supported. PowerPoint features not supported on the device include: • Notes. Notes written for slides will not be visible. • Rearranging or editing slides. PowerPoint Mobile is a viewer only. • File formats. Files created in *.ppt format earlier than PowerPoint '97 and HTML files in *.htm and *.mht formats are not supported. To start a slide show presentation 1. Tap Start > Programs > PowerPoint Mobile. 2. In the presentation list, tap the slide show you want to view. 3. Tap the current slide to advance to the next slide. If the presentation is set up as a timed slide show, slides will advance automatically. 164 | Using Other Applications To stop a slide show • In a PowerPoint Mobile presentation, tap > End Show. To navigate between slides You can advance to the next slide if a presentation is not set up as a timed slide show, return to the previous slide, or go to any slide out of sequence. 1. Tap Start > Programs > PowerPoint Mobile. 2. Open the presentation you want to view. 3. Tap > Next or Previous, or tap Go to Slide and tap the the slide you want to view. Notes If you have zoomed in to see a slide in more detail, you cannot navigate to another slide until you zoom out. Tapping Next or Previous may play an animation on a slide rather than navigate to another slide. Tip Simply tap the current slide to go to the next one. Using Other Applications | 165 9.4 Using ClearVue PDF ClearVue PDF displays Portable Document Format (PDF) files. These files usually have a .pdf file extension. To open a PDF file on your device 1. Tap Start > Programs > ClearVue PDF. 2. Tap File > Open to view a list of PDF files on your device. 3. Tap the file you want to view. ClearVue PDF To navigate through a PDF document You can do any of the following: • Tap the Up, Down, Right, and Left arrow keys on the horizontal and vertical scrollbars to move to the desired direction of the page. • Press NAVIGATION up, down, right, and left to move around the page. Tap the space between the arrow keys and the scrollbar with your stylus to move one screen towards the desired position. • 166 | Using Other Applications • Use the Left, Right, Up, and Down arrow keys on the hardware keyboard to move to the desired position. • Tap anywhere on the screen with your stylus and drag it to move around the page so that you can view all the areas. To enlarge or reduce the display size 1. Tap Start > Programs > ClearVue PDF. 2. Tap File > Open to view a list of PDF files on your device. 3. Tap the file you want to view. 4. Tap Zoom. 5. Select a predefined zoom ratio, or Page Width or Whole Page. 6. Tap Custom to set an arbitrary zoom ratio. 9.5 Using MIDlet Manager MIDlets are Java applications that can run on mobile devices. Your device supports Java 2 Micro Edition, J2ME. The MIDlet Manager allows you to download Java applications, such as games and tools that are specifically designed for mobile devices. Although some Java applications and games have already been installed on your device, the Java MIDlet Manager gives you the flexibility of installing and managing additional J2ME applications from the Internet. To install MIDlets from the Internet 1. Locate the MIDlet/MIDlet suite while connected to the Internet. 2. Select the MIDlet/MIDlet suite to download. 3. Confirm to start downloading. 4. Run the file(s) to install. Note You can cancel the installation at any time. Using Other Applications | 167 To install MIDlets from a PC You can install the MIDlets/MIDlet suites on your device from a PC using the USB sync cable, the optional cradle, infrared, or Bluetooth. MIDlets copied to your device using infrared, Bluetooth, or e-mail attachments are automatically saved in the My Documents folder. However, you can copy the MIDlet file(s) from a PC to any of the following temporary folders on your device from where MIDlet Manager can install them. • Device memory: ../My device/My Documents/My MIDlets • Storage card: ../My device/Storage Card Note If the My MIDlets folder does not exist in My Documents, you can create one with the same folder name. However, a folder named Storage Card automatically appears after you insert an storage card into your device. To install a MIDlet/MIDlet suite 1. Tap Start > Programs > MIDlet Manager > Menu > Install. 2. Select the MIDlet/MIDlet suite from the list. 3. Tap Install from the shortcut menu. 4. Confirm to complete the installation. Note 168 To remove the MIDlet files from the temporary folder, tap Delete from the shortcut menu. | Using Other Applications MIDlet Manager To run MIDlets on your device 1. Tap Start > Programs > MIDlet Manager. 2. Tap a MIDlet to run. To view the MIDlets currently running • Note On the MIDlet Manager screen, tap Show > Running. To view the most recently used MIDlets, tap Show > Recent. To stop running a MIDlet 1. Tap Start > Programs > MIDlet Manager. 2. Tap Show > Running. 3. Tap and hold a MIDlet on the Running MIDlets screen, and tap Stop. Note To stop all MIDlets currently running on your device, tap Menu > Stop All. Using Other Applications | 169 Manage MIDlets/MIDlet suites You can organize the MIDlets into groups and define custom groups. You can also change the default settings for a MIDlet. To customize the display settings 1. Tap Sort By at the top of the MIDlet Manager screen. 2. Choose to sort by Name or by Size. To change the display name of a MIDlet 1. Tap and hold a MIDlet, and tap Rename. 2. Enter a new name for the MIDlet. 3. Tap OK. Note You cannot change the name of a MIDlet suite. To uninstall a MIDlet/MIDlet suite Before you uninstall a MIDlet/MIDlet suite, make sure that it is not running. 1. Tap and hold the MIDlet/MIDlet suite on the MIDlet Manager screen, and tap Uninstall. 2. Tap OK to confirm. Note You cannot uninstall a single MIDlet from a MIDlet suite; you can uninstall only the complete MIDlet suite. To check storage space • Tap Menu > System Info on the MIDlet Manager screen to see how much device storage space is used by MIDlets. To select a network type • Tap Menu > Choose Network Type on the MIDlet Manager screen, and select a network type from the list. To configure MIDlet security You can adjust security settings for each MIDlet/MIDlet suite. 170 | Using Other Applications 1. Tap and hold a MIDlet. 2. Tap Security from the shortcut menu. Note that some features may not be available for all MIDlets/MIDlet suites. Following are the security options that you can set for a running MIDlet/MIDlet suite. Security Option Description Net Access Determines whether a MIDlet/MIDlet suite can access the Internet. Local Connectivity Enables a MIDlet/MIDlet suite to access services, such as infrared and Bluetooth. App Auto Run Enables a MIDlet/MIDlet suite to run at specified times, or any time. Messaging Determines whether a MIDlet/MIDlet suite can send and/or receive SMS messages. Multimedia Recording Enables a MIDlet/MIDlet suite to record sounds and images. Using Other Applications | 171 Error messages The following is a list of error messages that you may receive while managing and using MIDlets/MIDlet suites on your device. 172 Error Message Description Either RAM shortage, or insufficient space on the file system There is not sufficient memory on your device. Network out The jar size does not match that specified in the jad The jar manifest does not match the jad Invalid Java application descriptor (jad) Invalid Java archive (jar) This Java application is not compatible with this device There is no network connection available. | Using Other Applications The installation information provided by the MIDlet manufacturer is inaccurate. The installation information provided by the MIDlet manufacturer is inaccurate. There is a problem with the installation file provided by the MIDlet manufacturer. There is a problem with the installation file provided by the MIDlet manufacturer. One or more features required by this MIDlet is not available on your device. 9.6 Using ZIP This feature allows you to save memory and increase the storage capacity of your device by compressing files in the conventional ZIP format. You can view and extract archive files received from various sources. You can also create new .zip files on your device. Start ZIP and Open .zip files You can use ZIP to either archive files or open an existing archive file on your device. Each time you start ZIP on your device, it searches for files that have the .zip file extension, and displays these files on the Archive List screen. To start ZIP on your device 1. Tap Start > Programs > ZIP. 2. Open a file using any of the following: • Select a file and tap File > Open Archive. • Tap and hold a file and tap Open Archive. • Double-tap a file. View Archive List screen The Archive List screen displays the .zip files on your device in the order they are found. While adding files to an archive file, ZIP automatically compresses the files before adding them. On the Archive List screen, you can use the File menu and View menu. Some of the options available on the File menu also appear on the toolbar of the Archive List screen. Using Other Applications | 173 Zip, List View • File menu • • New Archive. Lets you create a new archive file with a .zip file extension. Open Archive. Lets you open a ZIP file. • Rename Archive. Lets you rename an existing ZIP file. • Delete Archive. Lets you remove a ZIP file. • • Archive Properties. Displays information about the current archive file. Send. Lets you send a ZIP file either via e-mail or infrared. • Recent. Displays a list of recently used files. • Options. Lets you set various view mode and compression level options for an archive file. About ZIP. Displays version and copyright information. • 174 | Using Other Applications • View menu • Large Icons. Displays all files as large icons. • Small Icons. Displays all files as small icons. • List. Displays all files in a list. • Note Details. Displays all files in detail. You cannot select multiple ZIP files. Manage a ZIP file After you open a ZIP file, you can either extract the file to a folder or location, or perform various tasks on the file. The icons on the toolbar of the ZIP screen also provide some of these functions. Following is an illustration of the ZIP screen. Zip, Archive View • File menu • • New Archive. Creates a new archive file with a .zip file extension. Find Archive. Locates an archive file. Using Other Applications | 175 • Close Archive. Closes an archive file. • Rename Archive. Lets you rename an archive file. • Delete Archive. Removes an archive file. • • • 176 Archive Properties. Displays information about the current archive file. • Integrity Test. Checks the selected file for data correctness and reliability. • Refresh. Lets you refresh the content of the current archive file. • Recent. Displays a list of recently opened archive files, including the current file. Action menu • Add. Lets you add files to the archive. • Extract. Lets you extract files from the archive to the folder of • your choice. Delete. Removes files from the archive. • Send via E-mail. Lets you send the archive file via e-mail. • Send via Infrared. Lets you send the archive file via infrared. • View. Lets you view a file from the archive file. • • Multi-Select Mode. Lets you select multiple files in the archive file. Select All. Selects all files in the archive file. • Select None. Clears all selected files in the archive file. • Select Invert. Selects in reverse from the archive file. View menu • Show Folders. Shows the folder instead of the entire path. • Up One Level. Takes you up one level from the current directory. | Using Other Applications • • Large Icons. Displays all files as large icons. • Small Icons. Displays all files as small icons. • List. Displays all files in a list. • Details. Displays all files in detail. • Extended. Displays all files in detail. • Sort by. Sorts all files by the sort order you select. • Properties. Displays information about the current file. • Status Pane. Displays the status of the current file. • Toolbar. Shows or hides the toolbar. Tools menu • • Options. Lets you set various view mode and compression level options for an archive file. About Zip. Displays version and copyright information. Using Other Applications | 177 178 | Using Other Applications Appendix A.1 Regulatory Notices A.2 Specifications A.3 Index A.1 Regulatory Notices Regulatory Agency IDs For regulatory identification purposes, your product is assigned a model number of WIZA100./110 To ensure continued reliable and safe operation of your device, use only the accessories listed below with your WIZA100./110 The Battery Pack has been assigned a model number of WIZA160. This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 2 Amp power supply unit. European Union Notice Products with CE marking comply with the R&TTE Directive (99/5/ EC), the EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards). • EN 60950-1 (IEC 60950-1) Safety of InformationTechnology Equipment. • ETSI EN 301 511 Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TTE directive (1995/5/EC ). • ETSI EN 301 489-1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. ETSI EN 301 489-7 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile • 180 | Appendix and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS). • ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.AccessoriesModel NumberCradlePH15x • ETSI EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques. • • GSM11.10 ANSI/IEEE C.95.1-1992 Specific absorption rate in mobile phone emission condition for body health. • EN 50360:2001 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) EN 50371:2002 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public • Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee Appendix | 181 that interference will not occur in a particular installation. If this equipment does cause harm-ful interference to radio or TV reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: .Reorient or relocate the receiving antenna. .Increase the separation between the equipment and receiver. .Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced technician for help. radio or television This device complies with part 15 of the FCC Rules. Operation is subject to the followino two conditions: (1) This device may not. cause harmful interference. and (2) this device must accept any interference received. includino interference that may cause undesired operation. Modifications The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by High Tech Computer Corporation may void the user's authority to operate the equipment. Important Retain and Health and Safety Information follow all warnings To reduce the all product in the operating risk of bodily the equipment, observe for SAR specified power by the level This at the phone so general, lower 1821 Appendix the the the the closer you power frequency output. fire, and can damage to well are power to Before a wireless a phone highest the certified SAR is level, the actual below the maximum value. at multiple power to operate required positions at its Although power be is designed the operating transmitting bands. certified phone only shock, standard phone operation to use Observe product. precautions. using with as electric instructions. the for RF Exposure highest while is because levels FCC operating on following conducted in all tested determined of the are and injury, the Safety Precautions Tests safety instructions to reach base model station the SAR level network. antenna, is available In the for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements may differ among phone models, depending upon available accessories and FCC requirements). For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only original manufacturer approved accessories. When carrying the phone while it is on, use the specific original manufacturer supplied or approved carrying case, holster, or other body-worn accessory. General Precautions • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technician or provider. • Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions: • Liquid has been spilled or an object has fallen into the product. • • • • • • The product has been exposed to rain or water. The product has been dropped or damaged. There are noticeable signs of overheating. The product does not operate normally when you follow the operating instructions. Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Avoid wet areas Never use the product in a wet location. Appendix | 183 • • Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. Mounting Accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. • Avoid unstable mounting Do not place the product with an unstable base. • Use product with approved equipment This product should be used only with personal computers and options identified as suitable for use with your equipment. • Adjust the volume Turn down the volume before using headphones or other audio devices. • Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. Safety Precautions for Power Supply Unit • • 184 Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product. Handle battery packs carefully This product contains a Li-Ion Polymer battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, | Appendix crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60˚C (140˚F). Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Govern-ment. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the gen-eral population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies: • American National Standards Institute (ANSI) IEEE. C95.1-1992 • National Council on Radiation Protection and Measure-ment (NCRP). Report 86. 1986 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 • Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. Normal condi-tions only ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equip-ment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. SAR Information SAR: 1.132 1.272 W/Kg @ 1g (FCC). Appendix | 185 Warning! DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE ABOVE 60˚C (140˚F), OR DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT. 186 | Appendix A.2 Specifications System Information Processor TI OMAP 850 Memory - ROM : 128 MB - RAM : 64 MB SDRAM Operating System Windows MobileTM Version 5.0 Display LCD Type 2.8” transflective TFT-LCD with back-light LEDs, touch-sensitive screen Resolution 240 x 320 with 65,536 colors Alignment Support Portrait and Landscape GSM/EDGE Module Functionality GSM/EDGE (850, 900, 1800, and 1900) Mode Dual (GSM) Internal Antenna Yes Camera Module Type Main Camera : CMOS 1.3Mega pixel with fixed lens Resolution Main Camera : 1.3 M with Video/Flash Light Physical Dimensions 108mm (L) x 58mm (W) x 23.7mm (T) Weight 150g (with battery) Expansion Slots Mini SD Card Yes Controls and Lights Appendix | 187 Navigation Buttons 5-way navigation pad - 5 program buttons : Backlight, Voice record/Voice recognition, Camera, Messaging, Internet Explorer - 4 phone functions : Call, End, right and left softkey - Volume control slider - Power On/Off - Reset button Keyboard QWERTY type, 41 keys LED Bi-color LED on the right side: Green and Orange for GSM standby, SMS message, GSM network status, notification, battery charging status. Bi-color LED on the left side: Blue and green for Bluetooth system notification of powered-up and ready to transmit radio frequency signal, and Wi-Fi status. Audio Audio Controller AGC Microphone/Speaker Built-in/Dual, Hands-free Headphone AMR/AAC/WAV/WMA/MP3 codec Connection 188 Infrared IrDA SIR I/O port USB, Mini-SD card slot with door(top) Antennat External connector for GSM and EDGE Audio Stereo earphone/microphone jack | Appendix A.3 Index A Accessibility 157 Accessing MMS 118 ActiveSync 57 Adding and Removing Programs 73 Adding Canned text 122 Appointment search 41 Audio 186 Backing Up Files 76 Battery 16 Beaming Information 93 Block calls 72 Block Recognizer 30 Bluetooth 60 Bluetooth partnership 91 Calendar 127 Calendar search 41 Calibration 18 Caller ID 72 Call barring 72 Call forwarding 72 Call waiting 72 Camera 185 Capture formats 136 capture modes 137 Change MMS settings 123 Charging Battery 17 Composing MMS messages 119 Composing MMS messages from Templates 120 conference call 52 Configuring MIDlet Security 170 Configuring MMS message settings 123 Connection 186 Connect to Internet 84 Connect to private network 85 Connect to Terminal Server 109 Contacts 129 Contacts search 41 Controls & Lights 186 Cookies, Security Settings (Internet Explorer) 89 Copy media files 156 copy pictures from a PC 147 Customizing the Start menu 65 Deleting pictures & videos 149 Desktop player 151 Appendix | 189 Digital Rights Management 155 Display 185 Drawing and Writing on the Screen 37 E-mail and Text Messages 112 E-mail search 41 Editing pictures & videos 149 Excel Mobile 162 Exchange Server 59 Expansion Slots 185 Favorites, transfering from PC 87 Favorites (Internet Explorer) 87 flight mode 45 GSM/GPRS Module 185 Handwriting 37 Help search 41 190 | Appendix History list (Internet Explorer 88 Home page (Internet Explorer) 87 Images, showing on Web pages 88 Indicators 21 Infrared (IR) 60 Input mode 37 Input Panel 28 Input Selector 29 Inserting audio 122 Inserting photo & video 121 Installing ActiveSync 57 Installing MIDlets from a PC 168 Installing MIDlets from the Internet 167 Installing SIM Card 15 Internet Explorer Mobile 87 Introduction 28 Keypad tone 71 Launching camera 149 Letter Recognizer 29 Library screen 153 Licensed media 155 Mail search 41 Main camera zoom range 141 Managing Memory 75 Managing MIDlets/MIDlet suites 170 Managing ZIP files 175 Media synchronization settings 61 MSN Messenger 125 Navigating through PDF Documents 166 Network settings 72 Notes 133 Notes search 41 Now Playing screen 153 On-Screen Keyboard 29 Opening .ZIP files 173 Opening a PDF file 166 Password 78 Personalizing Your Pocket PC Phone 64 Personal and system settings 67 Phone settings 71 Physical 185 Pictures, on Web pages 88 PIN 44, 78 Playback screen 153 Playing videos 148 Play media 155 Pocket PC player 151 PowerPoint Mobile 164 Protected files 155 Protecting Your Device 78 Recording a Note 40 Regulatory Notices 180 Replying to MMS messages 123 Resetting Your Pocket PC Phone 80 Ring tone 71 Ring type 71 Running GPRS Monitor 105 Appendix | 191 192 Safety Information 182 Searching 41 Security Settings (Internet Explorer) 89 Sending pictures & videos 150 Setting advanced options 121 Setting Date / Time / Language / Regional Options 65 Setting pictures as Today backgrounds 150 Setting up MMS account 118 Smart Dialing 49 Sorting pictures & videos 149 Specifications 185, 187 Starting Up 18 Starting ZIP 173 Start Phone Pad 34 Start WLAN Manager 101 Storage card 61 Synchronizing Information 57 Synchronizing music, video, and pictures 61 Synchronizing via Infrared and Bluetooth 60 Synchronizing with Exchange Server 59 Sync Setup Wizard 57 System Information 185 Tasks 131 Tasks search 41 Temporary Internet files, deleting (Internet Explorer) 89 Text size, Web pages 88 Today Screen 20 Today screen settings 64 Transcriber 30 Troubleshooting Windows Media Player 157 Type text 29 | Appendix Uninstalling MIDlets/MIDlet suites 170 Use main camera 136 Use MMS Video capture mode 140 Use Multi-Tap input mode 36 Use Numeric input mode 36 Use Phone Pad Options screen 36 Use shortcuts 137 Use Still Image capture modes 140 Use T9 Input mode 35 Use the Review screen 141 Use the Tools menu 144 Use Video capture mode 140 Use zooming 141 Using ActiveSync 56 Using Bluetooth 90 Using ClearVue PDF 166 Using GPRS Monitor 103 Using MIDlet Manager 167 Using MMS Messages 118 Using Pictures & Videos 147 Using Start Menu 25 Using Terminal Services Client 109 Using the Camera Settings screen 143 Using Wireless LAN Manager 100 Using Wireless Modem 95 Using ZIP 159, 173 Web browsing (Internet Explorer) 87 Web pages, layout 88 Web pages, showing pictures on 88 Web pages, text size 88 Windows Media Player 61, 151 Windows Media Player accessibility 157 Windows Media Player menus 153 Windows Media Player troubleshooting 157 Word Mobile 160 Writing on the screen 37 Viewing Archive List Screen 173 Viewing MMS messages 123 Viewing pictures 148 Viewing slideshows 148 Appendix | 193 194 | Appendix
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2005:05:20 16:55:18Z Creator : Adobe InDesign CS (3.0.1) Modify Date : 2005:06:24 10:03:02-07:00 Tagged PDF : No About : uuid:2d5c113a-0e8c-4f9c-a03e-422906feaee6 Producer : Adobe PDF Library 6.0 Trapped : False Creation Date : 2005:05:20 16:55:18Z Mod Date : 2005:06:24 10:03:02-07:00 Metadata Date : 2005:06:24 10:03:02-07:00 Creator Tool : Adobe InDesign CS (3.0.1) Rendition Class : proof:pdf Document ID : adobe:docid:indd:e3b1495c-c90c-11d9-ae92-f93a5cec2111 Instance ID : uuid:315d84de-6958-4917-b9e9-bc013b60e290 Derived From Instance ID : 086c75b6-c8f5-11d9-a6e0-be3c5112f1c5 Derived From Document ID : adobe:docid:indd:086c75b4-c8f5-11d9-a6e0-be3c5112f1c5 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:5c3edb6a-cb39-11d9-8f11-9f7318d5f48a, uuid:ccf37f1f-c907-11d9-8f1b-8f440944c12c, uuid:b0f23157-c907-11d9-8f1b-8f440944c12c, uuid:7681b202-c907-11d9-8f1b-8f440944c12c, uuid:7681b1fa-c907-11d9-8f1b-8f440944c12c, uuid:36a8d804-c907-11d9-8f1b-8f440944c12c, uuid:a0023999-bd40-11d9-ad20-fae24cd39b0d, uuid:a4656d56-b7ac-11d9-a3c2-c37a5b06e4e1, uuid:f860f0e3-bd40-11d9-ad20-fae24cd39b0d, uuid:d7b4484c-c90c-11d9-8f1b-8f440944c12c, uuid:d6b6af81-c90e-11d9-8f1b-8f440944c12c, uuid:d6b6af7c-c90e-11d9-8f1b-8f440944c12c, uuid:d927d40b-c39a-11d9-983a-812ae7c8ff51, uuid:2859d451-d174-11d9-9fcb-8d696390b296, uuid:3efdc8f8-d174-11d9-9fcb-8d696390b296, uuid:b8fcd9c6-c39a-11d9-983a-812ae7c8ff51, uuid:2723e29c-d174-11d9-9fcb-8d696390b296, uuid:a6d292c8-d173-11d9-9fcb-8d696390b296, uuid:a9374f23-d173-11d9-9fcb-8d696390b296, uuid:a6d292ce-d173-11d9-9fcb-8d696390b296, uuid:6a6f8343-d173-11d9-9fcb-8d696390b296, uuid:4bd7f623-d174-11d9-9fcb-8d696390b296, uuid:477764e0-d174-11d9-9fcb-8d696390b296, uuid:37159c7b-d174-11d9-9fcb-8d696390b296, uuid:37159c81-d174-11d9-9fcb-8d696390b296, uuid:466ebfd9-d174-11d9-9fcb-8d696390b296, , uuid:69326a7a-d173-11d9-9fcb-8d696390b296, uuid:52dda334-d174-11d9-9fcb-8d696390b296, uuid:52dda32e-d174-11d9-9fcb-8d696390b296, uuid:0d7911b9-d174-11d9-9fcb-8d696390b296, uuid:ba805ba0-d173-11d9-9fcb-8d696390b296, uuid:ba805ba6-d173-11d9-9fcb-8d696390b296, uuid:2b4b3b6b-d174-11d9-9fcb-8d696390b296, uuid:6a6f833d-d173-11d9-9fcb-8d696390b296, uuid:6b81b1ac-d173-11d9-9fcb-8d696390b296, uuid:b28c4363-d173-11d9-9fcb-8d696390b296, uuid:56a59df2-d174-11d9-9fcb-8d696390b296, uuid:6b81b1b2-d173-11d9-9fcb-8d696390b296, uuid:56a59dec-d174-11d9-9fcb-8d696390b296, uuid:24b59cd8-d174-11d9-9fcb-8d696390b296, uuid:23a8331d-d174-11d9-9fcb-8d696390b296, uuid:23a83323-d174-11d9-9fcb-8d696390b296, uuid:2272416e-d174-11d9-9fcb-8d696390b296, uuid:32a45acd-d174-11d9-9fcb-8d696390b296, uuid:552825ab-d174-11d9-9fcb-8d696390b296, uuid:0f7e7004-d174-11d9-9fcb-8d696390b296, uuid:13bb3df5-d174-11d9-9fcb-8d696390b296, uuid:69326a80-d173-11d9-9fcb-8d696390b296, uuid:da6e763b-c39a-11d9-983a-812ae7c8ff51, uuid:da9e253e-c39a-11d9-983a-812ae7c8ff51, uuid:da9e2544-c39a-11d9-983a-812ae7c8ff51, uuid:dad9c009-c39a-11d9-983a-812ae7c8ff51, uuid:de6fa963-c39a-11d9-983a-812ae7c8ff51, uuid:dad9c00f-c39a-11d9-983a-812ae7c8ff51, uuid:db04aa5e-c39a-11d9-983a-812ae7c8ff51, uuid:4b6d5187-c2cd-11d9-b425-d2f954189510, uuid:db4509dd-c39a-11d9-983a-812ae7c8ff51, uuid:db856956-c39a-11d9-983a-812ae7c8ff51, uuid:db85695c-c39a-11d9-983a-812ae7c8ff51, uuid:dbc3667b-c39a-11d9-983a-812ae7c8ff51, uuid:dbc36681-c39a-11d9-983a-812ae7c8ff51, uuid:dbf0b32a-c39a-11d9-983a-812ae7c8ff51, uuid:dbf0b330-c39a-11d9-983a-812ae7c8ff51, uuid:dc573850-c39a-11d9-983a-812ae7c8ff51, uuid:dc8949ad-c39a-11d9-983a-812ae7c8ff51, uuid:dcbdbd64-c39a-11d9-983a-812ae7c8ff51, uuid:dc2c4dfb-c39a-11d9-983a-812ae7c8ff51, uuid:dcbdbd6a-c39a-11d9-983a-812ae7c8ff51, uuid:dcf4937b-c39a-11d9-983a-812ae7c8ff51, uuid:dd1ab91c-c39a-11d9-983a-812ae7c8ff51, uuid:dd4cca7f-c39a-11d9-983a-812ae7c8ff51, uuid:dd755280-c39a-11d9-983a-812ae7c8ff51, uuid:7e2053b1-c2cc-11d9-b425-d2f954189510, uuid:ddac2891-c39a-11d9-983a-812ae7c8ff51, uuid:1aec7919-c5e4-11d9-8dda-cd96adb44d28, uuid:ab50e08b-b7ac-11d9-a3c2-c37a5b06e4e1, uuid:de3b35ac-c39a-11d9-983a-812ae7c8ff51, uuid:d927d413-c39a-11d9-983a-812ae7c8ff51, uuid:26a51f9c-b92f-11d9-b11c-82663a19efdb, uuid:defc541e-c39a-11d9-983a-812ae7c8ff51, uuid:27b4ebb1-b92f-11d9-b11c-82663a19efdb, uuid:26d009f1-b92f-11d9-b11c-82663a19efdb, uuid:d815a5a1-c39a-11d9-983a-812ae7c8ff51, uuid:d8cff518-cb75-11d9-a277-c77793d20c40, uuid:b139f1eb-cb79-11d9-a277-c77793d20c40, uuid:b139f1f2-cb79-11d9-a277-c77793d20c40, uuid:e791b07e-cb79-11d9-a277-c77793d20c40, uuid:af628cd3-cb7a-11d9-a277-c77793d20c40, uuid:23460c5f-b92f-11d9-b11c-82663a19efdb, uuid:26d009f7-b92f-11d9-b11c-82663a19efdb, uuid:273b53c6-b92f-11d9-b11c-82663a19efdb, uuid:27663e1b-b92f-11d9-b11c-82663a19efdb, uuid:26ef0884-b92f-11d9-b11c-82663a19efdb, uuid:26d009f7-b92f-11d9-b11c-82663a19efdb, uuid:26ef088a-b92f-11d9-b11c-82663a19efdb, uuid:278ec616-b92f-11d9-b11c-82663a19efdb, uuid:2717907f-b92f-11d9-b11c-82663a19efdb, uuid:27179085-b92f-11d9-b11c-82663a19efdb, uuid:273b53cc-b92f-11d9-b11c-82663a19efdb, uuid:278ec610-b92f-11d9-b11c-82663a19efdb, uuid:23460c5f-b92f-11d9-b11c-82663a19efdb, uuid:23460c59-b92f-11d9-b11c-82663a19efdb, uuid:231d845e-b92f-11d9-b11c-82663a19efdb, uuid:2362a898-b92f-11d9-b11c-82663a19efdb, uuid:2388ce39-b92f-11d9-b11c-82663a19efdb, uuid:2388ce33-b92f-11d9-b11c-82663a19efdb, uuid:231d8464-b92f-11d9-b11c-82663a19efdb, uuid:2362a892-b92f-11d9-b11c-82663a19efdb, uuid:22790226-b92f-11d9-b11c-82663a19efdb, uuid:22f4fc69-b92f-11d9-b11c-82663a19efdb, uuid:24c12244-b92f-11d9-b11c-82663a19efdb, uuid:242fb2cf-b92f-11d9-b11c-82663a19efdb, uuid:24989a4d-b92f-11d9-b11c-82663a19efdb, uuid:256a6935-b92f-11d9-b11c-82663a19efdb, uuid:2605620f-b92f-11d9-b11c-82663a19efdb, uuid:256a693d-b92f-11d9-b11c-82663a19efdb, uuid:2605620f-b92f-11d9-b11c-82663a19efdb, uuid:2584a316-b92f-11d9-b11c-82663a19efdb, uuid:25dcda14-b92f-11d9-b11c-82663a19efdb, uuid:25dcda1a-b92f-11d9-b11c-82663a19efdb, uuid:2584a31c-b92f-11d9-b11c-82663a19efdb, uuid:25af8d6b-b92f-11d9-b11c-82663a19efdb, uuid:2584a316-b92f-11d9-b11c-82663a19efdb, uuid:cc3d7598-c750-11d9-b948-b394d1c7dd72, uuid:24f595fd-b92f-11d9-b11c-82663a19efdb, uuid:27b4ebb7-b92f-11d9-b11c-82663a19efdb, uuid:27d64ca4-b92f-11d9-b11c-82663a19efdb, uuid:466ebfdf-d174-11d9-9fcb-8d696390b296, uuid:bba19bf3-b94d-11d9-8066-a052244948a5, uuid:8acef14e-d173-11d9-9fcb-8d696390b296, uuid:8acef148-d173-11d9-9fcb-8d696390b296, uuid:88efb89c-d173-11d9-9fcb-8d696390b296, uuid:bd0e63c5-b94d-11d9-8066-a052244948a5, uuid:8f68baf2-d173-11d9-9fcb-8d696390b296, uuid:bbfe97ac-b94d-11d9-8066-a052244948a5, uuid:babf1c92-b94d-11d9-8066-a052244948a5, uuid:baf39048-b94d-11d9-8066-a052244948a5, uuid:bb744f4b-b94d-11d9-8066-a052244948a5, uuid:bba19bf3-b94d-11d9-8066-a052244948a5, uuid:bb19b5ec-b94d-11d9-8066-a052244948a5, uuid:bc37d01b-b94d-11d9-8066-a052244948a5, uuid:bba19bf8-b94d-11d9-8066-a052244948a5, uuid:bbfe97b1-b94d-11d9-8066-a052244948a5, uuid:bbd3ad54-b94d-11d9-8066-a052244948a5, uuid:baf39052-b94d-11d9-8066-a052244948a5, uuid:bc37d020-b94d-11d9-8066-a052244948a5, uuid:bc7a91f2-b94d-11d9-8066-a052244948a5, uuid:8bf8f73b-d173-11d9-9fcb-8d696390b296, uuid:8a14f9e1-d173-11d9-9fcb-8d696390b296, uuid:babf1c8d-b94d-11d9-8066-a052244948a5, uuid:42bcfe18-b94e-11d9-ba60-bab531fbe97b, uuid:552825b1-d174-11d9-9fcb-8d696390b296, uuid:4d38d226-d174-11d9-9fcb-8d696390b296, uuid:42f7a52e-c90b-11d9-8f1b-8f440944c12c, uuid:5c3edb6a-cb39-11d9-8f11-9f7318d5f48a, uuid:e93cf78d-b94d-11d9-8066-a052244948a5, uuid:eb6fa28a-b94d-11d9-8066-a052244948a5, uuid:8c1a700e-cdc1-11d9-90f4-afa9b771c2a2, uuid:eaa035f0-b94d-11d9-8066-a052244948a5, uuid:ead4a9af-b94d-11d9-8066-a052244948a5, uuid:69637de9-c391-11d9-b2b0-e66bb74d3afd, uuid:6872b067-c391-11d9-b2b0-e66bb74d3afd, uuid:eaa035f8-b94d-11d9-8066-a052244948a5, uuid:e9631d32-b94d-11d9-8066-a052244948a5, uuid:e999f345-b94d-11d9-8066-a052244948a5, uuid:ea02dabf-b94d-11d9-8066-a052244948a5, uuid:f7759e65-b94d-11d9-8066-a052244948a5, uuid:f659e692-b94d-11d9-8066-a052244948a5, uuid:f7e34a97-b94d-11d9-8066-a052244948a5, uuid:f7e34a91-b94d-11d9-8066-a052244948a5, uuid:f7bd24f6-b94d-11d9-8066-a052244948a5, uuid:f6c53064-b94d-11d9-8066-a052244948a5, uuid:f8e4c889-b94d-11d9-8066-a052244948a5, uuid:f659e692-b94d-11d9-8066-a052244948a5, uuid:f9d5960a-b94d-11d9-8066-a052244948a5, uuid:f9d59610-b94d-11d9-8066-a052244948a5, uuid:f9b1d2c9-b94d-11d9-8066-a052244948a5, uuid:f94db003-b94d-11d9-8066-a052244948a5, uuid:f98223ba-b94d-11d9-8066-a052244948a5, uuid:f98223c0-b94d-11d9-8066-a052244948a5, uuid:f69ca865-b94d-11d9-8066-a052244948a5, uuid:f69ca86d-b94d-11d9-8066-a052244948a5, uuid:f659e68c-b94d-11d9-8066-a052244948a5, uuid:f836bce1-b94d-11d9-8066-a052244948a5, uuid:f8070dd8-b94d-11d9-8066-a052244948a5, uuid:f8b77be0-b94d-11d9-8066-a052244948a5, uuid:f9b1d2c9-b94d-11d9-8066-a052244948a5, uuid:f8640990-b94d-11d9-8066-a052244948a5, uuid:f893b893-b94d-11d9-8066-a052244948a5, uuid:f8b77be0-b94d-11d9-8066-a052244948a5, uuid:f864098a-b94d-11d9-8066-a052244948a5, uuid:f8070dde-b94d-11d9-8066-a052244948a5, uuid:f8b77bda-b94d-11d9-8066-a052244948a5, uuid:f7438d06-b94d-11d9-8066-a052244948a5, uuid:fa054513-b94d-11d9-8066-a052244948a5, uuid:fa054519-b94d-11d9-8066-a052244948a5, uuid:7b2fabd0-c8cf-11d9-a0bc-a5e3ef133c57, uuid:ae4cfaf7-bdd9-11d9-872c-a5d0b1f4b0ad, uuid:5061139a-bddf-11d9-872c-a5d0b1f4b0ad, uuid:5061139e-bddf-11d9-872c-a5d0b1f4b0ad, uuid:adfec88c-cdbf-11d9-90f4-afa9b771c2a2, uuid:1e2b0407-cdc1-11d9-90f4-afa9b771c2a2, uuid:ae4cfafd-bdd9-11d9-872c-a5d0b1f4b0ad, uuid:22380dc9-bddd-11d9-872c-a5d0b1f4b0ad, uuid:9be0ac41-bddd-11d9-872c-a5d0b1f4b0ad, uuid:b7ebf48a-bdde-11d9-872c-a5d0b1f4b0ad, uuid:26f69a36-bddf-11d9-872c-a5d0b1f4b0ad, uuid:90f50559-bddf-11d9-872c-a5d0b1f4b0ad, uuid:1dc2ea80-bdda-11d9-872c-a5d0b1f4b0ad, uuid:474c6273-bdda-11d9-872c-a5d0b1f4b0ad, uuid:6fe50ce6-bdda-11d9-872c-a5d0b1f4b0ad, uuid:6fe50cee-bdda-11d9-872c-a5d0b1f4b0ad, uuid:886cfeed-bdda-11d9-872c-a5d0b1f4b0ad, uuid:b464bca2-bdda-11d9-872c-a5d0b1f4b0ad, uuid:26f69a3c-bddf-11d9-872c-a5d0b1f4b0ad, uuid:506113a2-bddf-11d9-872c-a5d0b1f4b0ad, uuid:b464bca8-bdda-11d9-872c-a5d0b1f4b0ad, uuid:5061139a-bddf-11d9-872c-a5d0b1f4b0ad, uuid:5061139e-bddf-11d9-872c-a5d0b1f4b0ad, uuid:5061139a-bddf-11d9-872c-a5d0b1f4b0ad, uuid:5061139e-bddf-11d9-872c-a5d0b1f4b0ad, uuid:14cb71b0-bddb-11d9-872c-a5d0b1f4b0ad, uuid:d930c418-bddf-11d9-872c-a5d0b1f4b0ad, uuid:91984129-bde6-11d9-872c-a5d0b1f4b0ad, uuid:52b4648a-c828-11d9-a236-cfd9432288f0, uuid:c5f1c346-bde6-11d9-872c-a5d0b1f4b0ad, uuid:ae4cfaf7-bdd9-11d9-872c-a5d0b1f4b0ad, uuid:14cb71aa-bddb-11d9-872c-a5d0b1f4b0ad, uuid:b7ebf48d-bdde-11d9-872c-a5d0b1f4b0ad, uuid:b7ebf490-bdde-11d9-872c-a5d0b1f4b0ad, uuid:523beaed-bddb-11d9-872c-a5d0b1f4b0ad, uuid:7b2fabd0-c8cf-11d9-a0bc-a5e3ef133c57, uuid:22a63283-b955-11d9-a49e-82b43f1bbce7, uuid:64ab30fe-b954-11d9-a49e-82b43f1bbce7, uuid:7b2fabd0-c8cf-11d9-a0bc-a5e3ef133c57, uuid:22380dc6-bddd-11d9-872c-a5d0b1f4b0ad, uuid:9be0ac3e-bddd-11d9-872c-a5d0b1f4b0ad, uuid:f5cfc1c9-bddb-11d9-872c-a5d0b1f4b0ad, uuid:3cd0ca14-bddc-11d9-872c-a5d0b1f4b0ad, uuid:26f69a39-bddf-11d9-872c-a5d0b1f4b0ad, uuid:d930c418-bddf-11d9-872c-a5d0b1f4b0ad, uuid:91984129-bde6-11d9-872c-a5d0b1f4b0ad, uuid:14cb71aa-bddb-11d9-872c-a5d0b1f4b0ad, uuid:22380dc6-bddd-11d9-872c-a5d0b1f4b0ad, uuid:14cb71aa-bddb-11d9-872c-a5d0b1f4b0ad, uuid:0411ce70-b94e-11d9-8066-a052244948a5, uuid:04c49ec5-b94e-11d9-8066-a052244948a5, uuid:044fcb91-b94e-11d9-8066-a052244948a5, uuid:04785388-b94e-11d9-8066-a052244948a5, uuid:04c49ecd-b94e-11d9-8066-a052244948a5, uuid:00e10e93-c795-11d9-8214-c5ce1663df59, uuid:3cd0ca14-bddc-11d9-872c-a5d0b1f4b0ad, uuid:31bc3535-c8d5-11d9-b11e-cbbf7de55721, uuid:b446d74e-c8d4-11d9-b11e-cbbf7de55721, uuid:5e0ac716-c8d7-11d9-b11e-cbbf7de55721, uuid:31bc352f-c8d5-11d9-b11e-cbbf7de55721, uuid:9b7ca331-c8d5-11d9-b11e-cbbf7de55721, uuid:a3739d80-c8d6-11d9-b11e-cbbf7de55721, uuid:5e0ac710-c8d7-11d9-b11e-cbbf7de55721, uuid:b368397d-c8d7-11d9-b11e-cbbf7de55721, uuid:3681e8b3-c8d7-11d9-b11e-cbbf7de55721, uuid:df82bafc-c8d5-11d9-b11e-cbbf7de55721, uuid:0f7f33c5-b94e-11d9-8066-a052244948a5, uuid:0f7f33c5-b94e-11d9-8066-a052244948a5, uuid:9326523d-c2c9-11d9-800f-9c4d0dd63792, uuid:261f2110-c836-11d9-89a3-971df7509198, uuid:0f4136a4-b94e-11d9-8066-a052244948a5, uuid:0f13e9f9-b94e-11d9-8066-a052244948a5, uuid:a8397608-1297-11d9-af52-f9e736a7d090, uuid:a8397602-1297-11d9-af52-f9e736a7d090, uuid:2662c2d7-1293-11d9-af52-f9e736a7d090 Manifest Reference Document ID : adobe:docid:photoshop:e58f6089-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:ccf37f1e-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:b0f23156-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:7681b201-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:7681b1f9-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:36a8d803-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:d9fce1f1-950a-11d8-b35d-b7feff9bb30a, adobe:docid:photoshop:aca662a0-94ed-11d8-b393-d5a9275c5720, adobe:docid:photoshop:f860f0e2-bd40-11d9-ad20-fae24cd39b0d, adobe:docid:photoshop:f242304d-c908-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:6b247610-c909-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:7c8d97a3-c909-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:d927d40a-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:2859d450-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:3efdc8f7-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:b8fcd9c5-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:2723e29b-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:a6d292c7-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:a9374f22-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:a6d292cd-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:6a6f8342-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:4bd7f622-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:477764df-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:37159c7a-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:37159c80-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:466ebfd8-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:2723e2a1-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:679f7d1a-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:52dda333-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:50505ee4-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:0d7911b8-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:ba805b9f-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:ba805ba5-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:2b4b3b6a-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:6a6f833c-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:6b81b1ab-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:b28c4362-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:56a59df1-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:6b81b1b1-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:56a59deb-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:24b59cd7-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:23a8331c-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:23a83322-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:2272416d-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:32a45acc-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:552825aa-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:0f7e7003-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:13bb3df4-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:69326a7f-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:da6e763a-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:da9e253d-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:da9e2543-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dad9c008-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:de6fa962-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dad9c00e-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:db04aa5d-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:4b6d5183-c2cd-11d9-b425-d2f954189510, adobe:docid:photoshop:db4509dc-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:db4509e2-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:db85695b-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dbc3667a-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dbc36680-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dbf0b329-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dbf0b32f-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dc57384f-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dc8949ac-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dc8949b2-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dc2c4dfa-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dcbdbd69-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dcf4937a-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dd1ab91b-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dd4cca7e-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:dd75527f-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:7e2053b0-c2cc-11d9-b425-d2f954189510, adobe:docid:photoshop:ddac2890-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:1aec7918-c5e4-11d9-8dda-cd96adb44d28, adobe:docid:photoshop:ab50e08a-b7ac-11d9-a3c2-c37a5b06e4e1, adobe:docid:photoshop:de3b35ab-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:d927d412-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:26730e44-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:decca520-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:27b4ebb0-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:26d009f0-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:d815a5a0-c39a-11d9-983a-812ae7c8ff51, adobe:docid:photoshop:d8cff517-cb75-11d9-a277-c77793d20c40, adobe:docid:photoshop:b139f1ea-cb79-11d9-a277-c77793d20c40, adobe:docid:photoshop:b139f1f1-cb79-11d9-a277-c77793d20c40, adobe:docid:photoshop:e791b07d-cb79-11d9-a277-c77793d20c40, adobe:docid:photoshop:af628cd0-cb7a-11d9-a277-c77793d20c40, adobe:docid:photoshop:23460c5e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:26d009f6-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:273b53c5-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:27663e1a-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:26ef0883-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:26d009f6-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:26ef0889-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:278ec615-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2717907e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:27179084-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:273b53cb-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:27663e20-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:23460c5e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:23460c58-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:22f4fc6e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2362a897-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2388ce38-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2388ce32-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:231d8463-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2362a891-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:22790225-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:22f4fc68-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:24c12243-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:242fb2ce-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:24989a4c-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:256a6934-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2605620e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:256a693c-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2605620e-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2584a315-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:25af8d70-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:25dcda19-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2584a31b-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:25af8d6a-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:2584a315-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:cc3d7597-c750-11d9-b948-b394d1c7dd72, adobe:docid:photoshop:24f595fc-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:27b4ebb6-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:27d64ca3-b92f-11d9-b11c-82663a19efdb, adobe:docid:photoshop:466ebfde-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:bba19bf2-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:8acef14d-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:8acef147-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:88efb89b-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:bd0e63c4-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:8f68baf1-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:bbfe97ab-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:babf1c91-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:babf1c96-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bb744f4a-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bba19bf2-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bb19b5eb-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bc37d01a-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bba19bf7-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bbfe97b0-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bba19bfc-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:baf39051-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bc37d01f-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:bc7a91f1-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:8bf8f73a-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:8a14f9e0-d173-11d9-9fcb-8d696390b296, adobe:docid:photoshop:babf1c8c-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:42bcfe17-b94e-11d9-ba60-bab531fbe97b, adobe:docid:photoshop:552825b0-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:4d38d225-d174-11d9-9fcb-8d696390b296, adobe:docid:photoshop:d9826cc2-c909-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:e58f6089-c907-11d9-8f1b-8f440944c12c, adobe:docid:photoshop:e93cf78c-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:eb6fa289-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:8c1a700d-cdc1-11d9-90f4-afa9b771c2a2, adobe:docid:photoshop:eaa035ef-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:ead4a9ae-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:69637de8-c391-11d9-b2b0-e66bb74d3afd, adobe:docid:photoshop:6872b066-c391-11d9-b2b0-e66bb74d3afd, adobe:docid:photoshop:eaa035f7-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:e9631d31-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:e999f344-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:ea02dabe-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f7759e64-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f659e691-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f7e34a96-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f7e34a90-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f7bd24f5-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f6c53063-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8e4c888-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f659e691-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f9d59609-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f9d5960f-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f9b1d2c8-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f94db002-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f94db008-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f98223bf-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f69ca864-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f69ca86c-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f620ae26-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f836bce0-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8070dd7-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8b77bdf-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f9b1d2c8-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f864098f-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f893b892-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8b77bdf-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f836bce6-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8070ddd-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f8b77bd9-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:f7438d05-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:fa054512-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:fa054518-b94d-11d9-8066-a052244948a5, adobe:docid:photoshop:7b2fabcf-c8cf-11d9-a0bc-a5e3ef133c57, adobe:docid:photoshop:ae4cfaf6-bdd9-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:12af1efc-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:4dc929fb-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:2a0047e2-c81c-11d9-a236-cfd9432288f0, adobe:docid:photoshop:2a0047e6-c81c-11d9-a236-cfd9432288f0, adobe:docid:photoshop:ae4cfafc-bdd9-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:e07af92f-bdd9-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:e07af935-bdd9-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:0360847e-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:03608484-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:1dc2ea79-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:1dc2ea7f-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:474c6272-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:6fe50ce5-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:6fe50ced-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:886cfeec-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:886cfef2-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:9a821624-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:4dc929ff-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:b464bca7-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:12af1efc-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:4dc929fb-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:12af1efc-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:4dc929fb-bdd8-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:14cb71af-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:d930c417-bddf-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:91984128-bde6-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:52b46489-c828-11d9-a236-cfd9432288f0, adobe:docid:photoshop:9198412e-bde6-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:ae4cfaf6-bdd9-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:14cb71a9-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:f5285d66-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:f5285d6c-bdda-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:523beaec-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:7b2fabcf-c8cf-11d9-a0bc-a5e3ef133c57, adobe:docid:photoshop:03dfbd08-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:64ab30fd-b954-11d9-a49e-82b43f1bbce7, adobe:docid:photoshop:7b2fabcf-c8cf-11d9-a0bc-a5e3ef133c57, adobe:docid:photoshop:523beaf2-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:8319bd93-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:f5cfc1c8-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:3cd0ca13-bddc-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:3cd0ca19-bddc-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:d930c417-bddf-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:91984128-bde6-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:14cb71a9-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:523beaf2-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:14cb71a9-bddb-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:0411ce6f-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:04c49ec4-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:044fcb90-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:04785387-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:04c49ecc-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:00e10e92-c795-11d9-8214-c5ce1663df59, adobe:docid:photoshop:3cd0ca13-bddc-11d9-872c-a5d0b1f4b0ad, adobe:docid:photoshop:31bc3534-c8d5-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:b446d74d-c8d4-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:5e0ac715-c8d7-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:31bc352e-c8d5-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:9b7ca32d-c8d5-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:df82bb01-c8d5-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:5e0ac70f-c8d7-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:b368397c-c8d7-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:3681e8b2-c8d7-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:df82bafb-c8d5-11d9-b11e-cbbf7de55721, adobe:docid:photoshop:0f7f33c4-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:0f7f33c4-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:0ecc6367-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:261f210f-c836-11d9-89a3-971df7509198, adobe:docid:photoshop:0f4136a3-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:0f13e9f8-b94e-11d9-8066-a052244948a5, adobe:docid:photoshop:a8397607-1297-11d9-af52-f9e736a7d090, adobe:docid:photoshop:a8397601-1297-11d9-af52-f9e736a7d090, adobe:docid:photoshop:2662c2d6-1293-11d9-af52-f9e736a7d090 Format : application/pdf Title : Wizard_Generic_Manual_English.indb Page Count : 194 Has XFA : NoEXIF Metadata provided by EXIF.tools