HUBSAN TECHNOLOGY T009TX Hubsan Bluetooth Transmitter User Manual 15 HT009 UserMan r1

SHENZHEN HUBSAN TECHNOLOGY CO., LTD. Hubsan Bluetooth Transmitter 15 HT009 UserMan r1

15_HT009 UserMan r1

®H216A X4 STAR PROǒH216A Quick Start GuideǓVersion 1.0
APP DownloadStep 1Download the X-Hubsan APP. After the APP is fully installed, connect the aircraft to its battery. Go to your mobile device’s WIFI settings and select the H216A’s WIFI signal.The first flight configuration: aircraft + mobile device (phone/tablet)Name: HUBSAN_H216A_XXXXXX Password: 12345678Settings WIFI=O,O.;(9'4E.'E>>>>>>CHOOSE A NETWORK......CancelEnter the password for”Hubsan_h216a_XXX”JoinEnter Password6GYY]UXJ iOS X-Hubsan Download Android X-Hubsan DownloadX-Hubsan APP DownloadUsers will need the X-Hubsan app to operate this aircraft. Please download X-Hubsan from the App Store (iOS) or Google Play (Android).
Step 3Takeoff: (two ways; see directions below)Please begin flight only when you have 6 or more GPS satellites. Waypoint/Return to Home/Orbiting/Follow Me modes are then accessible. Note: GPS cannot be accessed indoors.a) Manual takeoff (with the virtual joysticks):To start/arm the motors, please be sure that the joystick setting is activated. Simultaneous-ly pull both joysticks diagonally down-out as shown in the below figure. Slowly push the throttle stick up; the aircraft will ascend and takeoff. Start the motors Push the Throttle (M2)'[ZU:GQKULLb) Automatic takeoff: Tap the Auto Takeoff key and the aircraft will take off and hover at a height of around 2 meters. Note that the Auto Takeoff key will turn into an Auto Land key after the aircraft begins to fly. Step 2Compass calibration: Please follow the app’s prompts to calibrate.Not connected
Before taking off, make sure that there are no obstructions in the flight route or environment. Be sure to choose a flat, open area when landing.To ensure safe flight, do not use your mobile device for other purposes or pair your unit with another mobile device during operation. If you wish to use another device to fly the aircraft, please power the unit off before reinitiating a new pairing. Pull the throttle down (M2) Disarm the motorsfigure 1 figure 2'[ZU2GTJ'[ZU8:.Step 4Landing: (three ways; see directions below)1) Manual landing (with the virtual joysticks): Slowly pull the throttle down until the copter has completed its descent to the ground. Disarm the motors by simultaneously pulling both sticks diagonally down-out (below). When the motors have completely stopped, release the joysticks.2) Tap the Auto Land icon and the aircraft will slowly descend to the ground. (Figure 1)3) Tap the Return to Home icon. You can configure the landing point- choose for the copter to land at the takeoff point or at the location of your mobile device. (Figure 2)
The second flight configuration: Aircraft + HT009 Transmitter+ SmartphoneStep 1Go to your mobile device’s WIFI settings and select the H216A’s WIFI signal.Users may fly in Mode 1 (right hand throttle) or Mode 2 (left hand throttle) with the remote control. This manual will introduce flight in Mode 2. The left joystick will control the height and the rotation; the right joystick controls the forward, backward and leftward flight direction of the aircraft. Experience real-time video transmission through the X-Hubsan app on a mobile device equipped with a high definition screen.Name: HUBSAN_H216A_XXXXXX Password: 12345678Settings WIFI=O,O.;(9'4E.'E>>>>>>CHOOSE A NETWORK......CancelEnter the password for”Hubsan_h216a_XXX”JoinEnter Password6GYY]UXJ 
Power the transmitter on; pair the mobile device and transmitter on the Bluetooth menu.Step 31. Enter the main app interface and tap the Settings cog on the upper righthand corner.2. Tap “Controller” and then “Using remote control”.3. The device will request permission to use Bluetooth. Tap “Allow” to continue.4. The interface will then show the “Bluetooth connection settings” menu. Select the HUBSAN HT009_XXXXXX and confirm to connect.SettingsStep 2Compass calibration: Please follow the app’s prompts to calibrate.If the Bluetooth connection is successful, the prompt "Bluetooth connection successful" will appear. The HT009 remote control will beep and its Bluetooth indicator will now stay solidly lit.Not connected Parameters Map RelayControllerUsing remote controlJunior SeniorJoystick operating modeTurn on BluetoothDENY ALLOWAn app on your device wants to turn on Bluetooth and make your device discoverable by other devices for 250 seconds. Allow?Bluetooth connection settingsRefreshOpen the remote control switch, click “Refresh” button to refresh the Bluetooth listConnectHUBSAN HT009_XXXXXXParameters Map Relay OthersController
Step 4: Takeoff (two options)a) Manually takeoff Simultaneously pull the transmitter joysticks diagonally down-out to arm the motors. Pull the throttle upwards (slowly and gently) to takeoff (as shown in the side figure).Step 5: Landing (3 options)a) Manual landing: Slowly and gently pull the throttle joystick down until the copter has completed its descent on the ground. Simultaneously pull the transmitter joysticks diagonally down-out to disarm the motors (as shown in the below figure).b) Auto TakeoffPlease confirm that conditions are safe for take-off. Then, long press the Auto Takeoff key and the aircraft will automatically take off, maintaining a height of around 2 meters. Note that when the aircraft is airborne, the Auto Takeoff key will become an Auto Land key. off (as sh
b) Auto Land: Please confirm that conditions are safe for a landing. Then, long press the Auto Land key. The aircraft will descend automatically, land and disarm. (see side figure)c) Return to home: Long press for the Return to Home key for 1.5 seconds and the quadcopter will perform a Return to Home. The flight control system will command the aircraft to return to its designated “home” point. (see side figure)High speed propellers are very dangerous. Please keep the aircraft away from people, animate and inanimate objects. Do not disarm during flight. The motors will stop in midair, causing the aircraft to fall and other such hazards. When disarming, wait until the motors come to a complete stop before releasing the joysticks.Keep the aircraft under control at all times while the motors are still running.
H216A Frequently Asked Questions1.Cannot arm the drone’s motors/the drone’s motors will not startPlease confirm that 1) the compass has been calibrated and 2) the aircraft has 6 or more GPS satellites. 2. Weak or nonexistent GPS signal/few or no GPS satellitesMake sure that the aircraft is not indoors or between buildings. Please take the aircraft outdoors to receive GPS satellites/signal.3. The aircraft does not return to the home pointWhen the aircraft takes off, be sure that the aircraft has received 6 or more satellites.4. The aircraft keeps on losing GPS satellites or GPS satellites drop to 0 erraticallyCheck to see whether there are sources of high-frequency signal interference around the aircraft (such as high-voltage lines, signal transmission towers, etc).5. Aircraft/video feed is shaky① Check if the aircraft propellers are deformed or broken. Please replace them.② Check that all aircraft body screws are firmly in place.③ Check whether any motor shafts are broken. Motors must be replaced if the shafts are broken.6. Cannot connect to the aircraft’s Wi-Fi① Restart the aircraft.② If you want to use the relay and the phone, aircraft are already bound, power the aircraft off and exit the X-Hubsan app. Start from page 4 of this manual to re-con-nect to the aircraft with the relay.7. How to retrieve the aircraft when unit has been lostRecord or take a picture of the aircraft’s GPS coordinates on the smartphone screen. Then locate the aircraft using the coordinates.
Getting to know your H216AGetting to know your HT0096NUZUQK_<OJKUQK_(GZZKX_IUSVGXZSKTZ)GSKXGNKGJGJP[YZSKTZQK_:KSVUXGXOR_TUL[TIZOUTPropeller BBatterycompartmentLED protective lampshadeSD card slotTop shell1080P Camera headBottom shellPropeller A MotorLEDThank you for purchasing a HUBSAN product. The H216A is an easy to fly aircraft capable of a variety of flight functions. It is equipped with a full-function remote control. Please read and follow the manual carefully for proper operation and use. Be sure to keep the manual as important reference for future routine maintenance and operational information. Approx-imate aircraft weight: 162g (includes propeller guards, propellers and battery)The HT009 is a Bluetooth transmitter fully outfitted for use with the H507A aircraft and its various functions. Experience real-time video transmission through the X-Hubsan app on a mobile device equipped with a high definition screen.
Mobile Device frameJoystickAuto Takeoff/Auto LandJoystickPower keyReturn to HomeTransmitter status LED Bluetooth status LEDGetting to know the X-Hubsan APPX-Hubsan is a flight control APP designed for HUBSAN WIFI-enabled aircraft. Users can control flight, camera, video and flight parameters with the APP. It is recommended to use a large screened smartphones or tablets for the optimal visual experience (recommended flight distance control is 100 meters).Please download the X-Hubsan APP for free via the App Store or Google Play.TEFPV (Video) signal RemoteControlSignalAircraftGPSsignalAircraft Power/Battery LevelHome Page SettingsFlight modeVirtual Joysticks On/Off toggleAuto Return to HomeAuto Take Off/LandHeading Aircraft LocationMap ModeMap calibration
2. The PropellersPropeller A Propeller BPropeller BPropeller A The X4 aircraft uses 5.3-inch propellers. Each is marked with either an A or a B. Please replace propellers if they are damaged. 1. Aircraft LED indicatorsH216A has 4 LEDs; the fore/frontal LEDs are blue and the rear LEDs are red. The LED status indications are defined as follows:AppendixCompass Calibration Calib. Compass 1: all 4 LEDs flash clockwiseCalib. Compass 2: LEDs should be flashing in vertical pairs, alternatelyHorizontal Calibration Flight ModeLow PowerHow to turn off the LEDsAll 4 LEDs flash simultaneouslyAll 4 LEDs are solidly litReturn to Home Blue LEDs (fore) are solidly lit; red LEDs (rear) will flash slowlyBlue LEDs (fore) are solidly lit; red LEDs (rear) flash rapidlyWhen recording and/or taking pictures, the throttle’s vertical trim button serves as an on/off toggle for the LEDsFunctionPower on and start up All 4 LEDs flash simultaneously LED status indicationFlight control signal statusWhen the flight control signal is lost, the rear LEDs will stay solid while the fore LEDs will slowly flash. When the flight control signal is stable and connected, the LEDs will be solidly lit.
Propeller B Propeller A1) Installation: Before installing propellers for the first time, please check that each Propel-ler A is matched with motor A and each Propeller B is matched with motor B. Align the "I" with the flat side of the "D" shaped motor shaft (Figure 1). Then use the provided screws and screwdriver to secure each propeller. Propeller A’s are paired with black propeller screws and are tightened counterclockwise. Propeller B’s are paired with silver propeller screws and are tightened clockwise.2) Removal: If propellers need to be changed, please uninstall as shown below with a screwdriver. Propeller A’s are paired with motor A shafts and are untightened clockwise. Propeller B’s are paired with motor B shafts and are untightened counterclockwise.Propeller APropeller BPropeller BPropeller AClockwise'(CounterclockwiseNoteMind the differing colors of the A and B propeller screws!“D” Shaft<Figure 1>Ȕȕ9_SHURCounterclockwiseClockwise
Warning:Product Name：X4 STAR PROCompany：Shenzhen Hubsan Technology Co., Ltd.Address喟13th Floor, Block 1, Tower C, Software Industry Base, Xuefu Road, Nanshan District, Shenzhen, China.Factory喟Dongguan Tengsheng Industrial Co., Ltd.Address喟 A22# Luyi Street, Tianxin Village, Tangxia Town, Dong guan, China.Hotline喟0769-82776166喍China喎Do not leave the quadcopter charging unattended. Always disconnect the quadcopter from the charger immediately after charging is complete. This is not a toy, not suitable for children under 14.Notice：Read the instruction manual carefully before use. Propellers may cause injury; caution!www.HUBSAN.com6TFS.BOVBM
Remark: 1) The remote (HT009) Using Bluetooth, other information is as follows: Product: Hubsan Bluetooth Transmitter Model No.: HT009 FCC ID: 2AN75-T009TX Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2) The drone (H216A) Using WIFI, other information is as follows: Product: HUBSAN X4 Desire Pro Model No.: H216A FCC ID: 2AN75-216ARX Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu