HUIZHOU FORYOU GENERAL ELECTRONICS TPMAI1DIC1-R TYRE PRESSURE MONITORING SYSTEM User Manual foryou manual sunxu

Download:
Mirror Download [FCC.gov]
Document ID	1122394
Application ID	8r3ZnOQhlt1YqmriAb9iwg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.8kB (885018 bits)
Date Submitted	2009-06-10 00:00:00
Date Available	2009-06-10 00:00:00
Creation Date	2009-05-04 09:47:45
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-06-04 11:06:27
Document Title	foryou-manual sunxu.cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	uida0013

TPMS USER MANUAL
Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
TPMAI1DIC1
USER MANUAL
Thank you for choosing
products. Please carefully read
the manual, you will learn to use all the functions of the new tire pressure
monitoring system
* This product is applicable to passenger cars
Contents
Precautions
Product description
Installation
Transmitter installation steps
Receiver installation steps
Operation
System introduction
System settings
Backlight settings
Common alerting mode
14
Troubleshooting
16
Disclaimer
17
Equipment connection
18
Contents
Precautions
Before using this product, please be sure to have read the 
This product is applicable to 12V cathode
24V
grounding battery system car, please do not install
the product in 24V truck or bus.
12V
Do not install the product in the field of impacting
driver's vision or driving operation.
In order to avoid traffic accidents caused by
decentralizing driver's attention, please do not
operate the product while driving. If there is
operation need, please park your car in a safe
place.
Do not expose the product in the over-moist
environment or let it touch water, otherwise they will
lead to electrical short circuit damage
Avoid the strong impact on the product,otherwise it
will damage the structure components of the
product.
Do not open the product crust or adjust any other

parts oneself.If there is a service need ,please go
to a professional repair service center for
consultation.
This product provides one-year free warranty, If there is quality
problem,please contact with local dealers. Man-made factors
such as incorrect installation, improper use,contacting with
harmful substances damage are not in the warranty list, please
keep your warranty card and certificate well for servicing.
Precautions
Product Description
Composing component
Tire Pressure Monitoring System includes the following components:
Name
SN.
Icon
Amount
Receiver
Transimitter
Paste board
Product technical specifications
Transimitter
Operating temperature
-40℃ ~ 105℃
Operating humidity
≤95%RH
Product Size
73×67×20mm
Product life
Normal use>6 years
Pressure measuring range
0kPa~800kPa
Transimitter frequency
433 . 92MHz
Receiver
Operating temperature
-30℃ ~ 70℃
Operating hvoltage
DC 12
Product Size
130×40×45mm
Receive frequency
433.92MHz
4V
Product Description
Installation
Transmitter installation steps:
1 remove tires from the car, remove the rubber tire after the tires
were deflated
2 clean the rim
3 Screw the protective cap, jacket nut, flat washer from the
transmitter to be installed.
sensor
rubber washer
flat washer
jacket nut
protective cap
4 Insert sensor into the corresponding location of the tire valve,
and then be fixed by jacket nut.
5 Pay attention to avoid the location of transmitters when install
rubber tire. After inflation of the tires according to the tire
inflation pressure value , screw protective cap to complete the
installation.
6 In accordance with the above steps to install other transmitters.
[Note]：①Transmitter should be installed by professionals. The steps must be in
accordance with Stickers shown on the transmitter to ensure that the
installation is correct and reliable.
②As the transmitters install on the valve mouth, extrusion on the rubber
valve should be avoid to prevent leakage or damage.
③After transmitter installation, you must do the tire dynamic balance test,
otherwise normal driving will be affected.The product only applies to
vacuum tire installation.
Installatio
Receiver installation steps:
1 Take out receiver, receiver paste board from the box.
2 Tear up the adhesive protective film on paste board, stick the
receiver on the selected position, adjust the position of the
receiver in order to help the driver read the display information
on the LCD screen.
OK
3 Connect the power anode with ACC ignition wiring, cathode
with the vehicle power ground. To ensure that the power
connection is correct and the input power is 12 ± 4V DC power.
The installation is completed.
Installation
Operation
System Introduction
After the receiver power wiring is connected, the vehicle ignition
switch turns on, the system start self-checking. LCD screen light up
all the display information ,at the same time buzzer starts buzzing.

Pressure Units:kPa
Tire (Tyre) key
Pressure Units:psi
Backlight (Light) key
Pressure Units:bar
Menu key
Celsius Temperature units:℃
Ok key
Fahrenheit Temperature units:
Pressure alerting light
Pressure Alerting
Temperature alerting light
TemperatureAlerting
User Settings
Tire ID read
Tire exchange
Transmitter battery
Operation
After self-checking passed, the system enter into tire checking
status display, (below) normal work interface, if the self-checking
does not pass, buzzer start buzzing and LED light lights up.
[ Note ] ： The system will displays the data it stored last time when turning
on the ignition switch after the automobile being parked a period of time,
and will refresh in one minute when the speed of the vehicle arrive 20 km/h.
Operation
System Settings
In normal working mode,press
key for 3 seconds to enter into
the menu settings interface,press
and then press
key can switch between
key can enter into corresponding function
settingmode or press
for 3 seconds to exit from the interface:
( Tire information display setting)
1 Press
key to select function display mode
。
key to enter into information display setting
2 Press
mode,show
,and the interface continue flashing,
indicating that the new settings can be carried out.Press
key,select
Press
(tire general display)or
(tire circle display).
key to save settings or press
key not to
3 save the settings, and return to the current display
mode
(circle display)：System cycle shows information
of each tire
(General display)：Display the minimum
pressure data value of the tire. Press
read other tire information one by one.
Operation
key can
(Units display settings)
1 Press
key to select function display mode
2 Press
key to enter into unit display setting
mode,press
3 Press
key to select pressure unit
key to complete the pressure unit setting,and enter
into temperature unit setting.
4 Press
key to select temperature unit
5 Press
Key To Save Settings Or Press
Key Not
To Save The Settings, And Return To The Current
Display Mode
Operation
(Pressure and temperature limits setting)
Press
key to select function display mode
Press
key to enter into pressure, temperature alerting
limit setting mode, press
key to select
(the
factory default settings / user-settings).
After selected
,press
key to display factory default
high-pressure limit, and then press
key to display the
factory default low-pressure limit, press
key again to
display the factory default high temperature limit, and finally
press
key to save settings or press
key not to save
the settings, and return to the current display mode
Operation
4 After select
,press
key to operate self-setting limit
(defaulting select the first number of high-pressure limit), press
key to select setting position, the selected position will keep
flashing until the next position is selected by pressing
Press
key.
key to adjust the size of flashing bit values until the
last high-temperature limit is set up,.Press
settings or press
key to save
key not to save the settings, and return to
the current display mode
。
Operation
10
(Tire ID exchange setting)
Press
key to select function display mode
Press
key to enter into the tire ID exchange mode,
press
key to select the tire, selected tires keep in
flashing state.
3 Press
key, the No. on corresponding location of selected
tire starts flashing, press
key to adjust(
) to the No.
which in corresponding location of tire with the needs of
exchange.
Press
key to save Settings or press
key not to save
the settings, and return to the the 2nd step of current display
mode, press
Operation
11
key to return to the current display mode
(Tire ID No. read setting)
Before system work properly, the tires ID No. need to be read,
then the transmitter can send data to the receiver real-time.
1 Press
key to select function display mode
key to enter into the tire ID No. read mode, press
2 Press
key to select the tire, selected tires keep in flashing state.
3 Press
key, the No. on corresponding location of selected
tire start flashing, waiting to receive the ID signal. At this time
deflate the selected tire( reference the following [Note])After
received the ID signal, the buzzer start buzzing and the
digital flashing frequency speed up.
4 Press
key to save Settings or press
key not to save
the settings, and return to the the 2nd step of current display
mode, press
key to return to the current display mode
Operation
12
Finish learning of other tires according above steps
[Note] ID No. studying has been completed before leave factory, please follow the transmitter
stickers to install. Tire ID No. studying, relative atmospheric pressure is＞/ = to 60kPa, the
deflation is 30kPa in 1 minute.
(Spare tire activation settings)
1 Press
keys to choose function display mode
key to enter into spare tire setup mode ,display
Press
, and continue to winkle, indicating that the new settings
can be carried out. Press
3 Press
key to select
key to save Settings or press
or
key not to save
the settings, and return to the current display mode
Backlight settings
Receiver in working status,press
press
Operation
13
key to turn on the backlight,
key again, turn off the backlight
Common Alerting Mode
Fast leaking alerting, buzzer buzzing, pressure warning light
flashing.
High pressure alerting, buzzer buzzing, pressure warning light
flashing.
High temperature alerting, buzzer buzzing, pressure warning
light flashing.
Low pressure alerting, buzzer buzzing, pressure warning light
flashing.
Operation
14
Transmitter failure alerting, buzzer buzzing
Low voltage alerting, buzzer buzzing
No signal alerting, buzzer buzzing
Alerting default limits
Low pressure alerting
High pressure alerting
High temperature alerting
≤190 kPa
≥330 kPa
≥80℃
[Notice]①If the alerting state displays, please solve the problem in time, which could save transmitter
power consumption.
②In alerting state, press any button to stop alerting sound.
Operation
15
Troubleshooting
Failure phenomenon
Possible reasons
No power
Be ensure that cathode and anode
power supply connection and
grounding are correct.
Fault display
Contact suppliers for replacement
No LCD display
No receiving signal Transmitter does not
from transmitter
work
Tire ID read mode
Less than 30kPa
deflated 1 minute
can not read ID
Solution
Ensure tire pressure is≥ 60kPa
To ensure that the deflation is greater
than 30kPa in 1 minute
Troubleshooting
16
Disclaimer
1 Except the installation methods mentioned in user's manual, any changes
in product installation and product structure are not allowed.
In order to avoid damage to the system, please do not open the product , all the
relevant technical services staff should be professionally trained, if the tires have
to be disassembled, please note that do not damage the transmitter.
This product can effectively monitor the tire, but we can not guarantee any
unexpected accidents.Users with the system can improve vehicle security
control.
When users purchase the system, please be sure to fill in the warranty card
correctly to facilitate the manufacturers to provide after-sales service. If the
product is purchased on where specified in the Company's non-seller list,
the company will be entitled to refuse to provide any service.
5 Tire Pressure Monitoring product warranty contract does not apply to any
expendable parts (such as the battery of transmitter), or the products, parts
or accessories of non-FOUYOU Group. Warranty period will take effect for
one year from the date of purchase.
6 With this system, we still strongly recommend that customers regularly
Pressure Units Glossary
kPa
Pressure units: kPa (the pressure of China's legal unit)
psi
Pressure unit: pounds / square inch
bar
Pressure units:bar
Pressure conversion
1psi=6.895kPa;1bar=100kPa;1bar=14.5psi
Temperature Units
℃
Temperature unit: Celsius temperature
℉
Temperature units: Fahrenheit
Temperature conversion
Disclaimer
17
Glossary
℉=32+1.8℃
Equipment Connection
Receiver
Paste board
GND
ACC
Left front wheel transmitter
Right front wheel transmitter
Left rear wheel transmitter
Right rear wheel transmitter
The first edition (April，2009)
We do not notice when there is an upgrade
FOUYOU Group CO，Ltd has the power of final interpretation.
Equipment Connection
18
24rd floor, Foryou Tower, Yanda yi road, Huizhou, Guangdong Province,China
http://www.foryougroup.com
E-mail: AEsales@foryougroup.com
TEL: 0752-2556569
Fax: 0752-2556567

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2009:05:04 09:47:45+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:06:04 11:06:27+08:00
Metadata Date                   : 2009:06:04 11:06:27+08:00
Format                          : application/pdf
Creator                         : uida0013
Title                           : foryou-manual sunxu.cdr
Document ID                     : uuid:2edd8afe-34e4-4a18-8775-5730ff0e196b
Instance ID                     : uuid:08b1c0a1-5f7b-4969-8ca3-ab2b45909c0e
Page Count                      : 24
Author                          : uida0013

EXIF Metadata provided by EXIF.tools