HUIZHOU GAOSHENGDA TECHNOLOGY WF75RL1510C WIFI Module User Manual WF75RL1510C 2 1 160106
Hui Zhou Gaoshengda Technology Co.,LTD WIFI Module WF75RL1510C 2 1 160106
Users Manual
PRODUCT SPECIFICATION Version 2.1 IEEE 802.11 b/g/n 1T1R USB Module Model Number:WF75RL1510C P/N: 07-MT7601-MA0G CMIIT ID:2014DP6213 2.4G channel: 1-13 ( Media Tek MT7601U ) 客户认可 Custom Approval Section Custom Name Department Approval Date: 拟制 审核 批准 DESIGN 高照 20151210 CHECK 陈宇科 20151210 APPROVAL 熊运自 20151210 惠 州 高 盛 达 科 技 有 限 公 司 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 中国惠州仲恺高新技术开发区华宇路 75 号 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL:(0752)2096628 E-mail: gaoz@gaosd.cn PRODUCTS SPECIFICATION WF75RL1510C Document revision history Rev. Date Author Version 1.0 2014-09-03 Draft Version 1.1 2014-09-16 Adding shield cover Version 1.2 2014-12-18 Adding P/N No. Version 1.3 2015-01-27 Adding CMIIT ID Update the label info Version 1.4 2015-09-20 Edited 11b frequency range Version 2.0 2015-12-10 PowerEN edited Version 2.1 2016-01-06 GI edited+ FCC Statement page Reason for Changes of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 1. Brief Description This document is to specify the product requirements for 802.11 b/g/n USB Module. This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11 b, 802.11 g, 802.11n Access Points through the wireless LAN. 2. Features ● Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. ● Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. ● Compatible with IEEE 802.11n standard to provide wireless 150Mbps data rate. z Operation at 2.4G-2.5GHz frequency band to meet worldwide regulations z Supports WEP ,WPA ,WPA2,TKIP,AES enhanced security z Drivers support Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S z High speed USB 2.0 interface ● ROHS compliant page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section 3.2.1.1 3.2.1.2 3.2.1.3 Feature Standard Radio and Modulation Schemes Operating Frequency Detailed Description ● IEEE 802.11b ● DQPSK , DBPSK , DSSS , and CCK ● 2400 ~ 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries ● 14 channels for Japan ● 11,5.5,2,and 1Mbps ● 3.2.1.4 Channel Numbers 3.2.1.5 3.2.1.6 Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector 3.2.1.7 ● ● ● ● CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25degree C 17dBm(±2dB) at 1,2,5.5,11Mbps page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 3.2.1.8 Receiver Sensitivity at Antenna Connector ● ● ● Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% -76 dBm at 2Mbps -76 dBm for 11Mbps 3.2.2 IEEE 802.11g Section 3.2.2.1 3.2.2.2 3.2.2.3 Feature Standard Radio and Modulation Type Operating Frequency Detailed Description ● IEEE 802.11g ● QPSK , BPSK , 16QAM ,64QAM with OFDM ● 2400 ~ 2483.5MHz ISM band ● 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps ● CSMA/CA with ACK ● 3.2.2.4 Channel Numbers ● ● 3.2.2.5 3.2.2.6 Data Rate Media Access Protocol 3.2.2.7 ● Transmitter Output Power at Antenna Connector ● ● ● ● 3.2.2.8 Receiver Sensitivity at Antenna Connector ● ● ● ● ● ● ● ● ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25degree C +17 dBm at 6,9Mbps +16 dBm at 12,18Mbps +15 dBm at 24,36Mbps +14 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C -82 dBm at 6Mbps -81 dBm at 9Mbps -79 dBm at 12Mbps -77 dBm at 18Mbps -74 dBm at 24Mbps -70 dBm at 36Mbps -66 dBm at 48Mbps -65 dBm at 54Mbps 3.2.3 IEEE 802.11n Section 3.2.3.1 3.2.3.2 3.2.3.3 3.2.3.4 Feature Standard Radio and Modulation Type Operating Frequency Data Rate(Mbps) Detailed Description ● IEEE 802.11n ● BPSK , QPSK , 16QAM ,64QAM with OFDM ● 2400 ~ 2483.5MHz page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C MCS GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.5 65 13 26 39 52 78 104 117 130 10 11 12 13 14 15 3.2.3.5 3.2.3.6 3.2.3.7 Media Access Protocol Transmitter Output Power at Antenna Connector ● 40MH 13.5 27 40.5 54 81 108 121.5 135 27 54 81 108 162 216 243 270 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 14.444 28.889 43.333 57.778 86.667 115.556 130.000 144.444 40MHz 15 30 45 60 90 120 135 150 30 60 90 120 180 240 170 300 CSMA/CA with ACK Typical RF Output Power(tolerance±2dB) at each RF chain,Data Rate and at roomTemp. 25degree C HT-20 ● 14±2dBm at MCS0~15 HT-40 ● 14±2dBm at MCS0~15 ● Receiver Sensitivity ● Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate=10% and at roomTemp. 25degree C at Antenna HT-20 Connector ● -82dBm at MCS0/8 ● -79dBm at MCS1/9 -77dBm at MCS2/10 ● -74dBm at MCS3/11 ● ● -70dBm at MCS4/12 -66dBm at MCS5/13 ● -65dBm at MCS6/14 ● ● -64dBm at MCS7/15 HT-40 ● ● ● ● ● ● ● ● -79dBm at MCS0/8 -76dBm at MCS1/9 -74dBm at MCS2/10 -71dBm at MCS3/11 -67dBm at MCS4/12 -63dBm at MCS5/13 -62dBm at MCS6/14 -61dBm at MCS7/15 page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4. 4.1 Electrical and Thermal Characteristics Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 Minimum -40 Maximum +80 60 125 Units °C °C °C General Section 5.2.1 5.2.2 5.2.3 5.2.4 Feature Detailed Description Antenna Type Operating Voltage Current Consumption USB ● ● ● ● ● Integrated antenna 5.0V±10% 230mA at continuous transmit mode 190mA at receive mode w/o receiving packet High Speed USB2.0 Interface 4.3 Software Requirements Driver Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S Security WEP ,WPA ,WPA2,TKIP,AES 4.3.1 Information 4.3.1.1 Feature General Information 4.3.1.2 4.3.1.3 Current Link Information Site survey Detailed Description ● General Information shows the name of Wireless Adapter,Adapter MAC Address,Regulatory Domain,Firmware Version,and Utility Version. ● Current Link Information shows the C ● To search the neighboring access points and display the information of all access points. page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4.3.2 Mechanical Requirements 4.3.2.1 4.3.2.2 4.3.2.3 Feature Length Width Height Detailed Description ● 36mm(PCB) ● 22mm(PCB) ● 1.0mm(PCB) 4.3.3 Environmental Requirements 4.3.3.1 Feature Operating Temperature Conditions 4.3.3.2 Non-Operating Temperature Conditions 4.3.3.3 Operating Humidity conditions 4.3.3.4 Non-Operating Humidity Conditions Detailed Description ● The product is capable of continuous reliable operation when operating in ambient temperature of 0°C to + 45°C . ● Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of -20°C to + 75°C . ● The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing. ● The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% non-condensing page of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 5 Connector Definition 1,5-Pin 1.25mm connector(Horizontal Type) Pin Definition Power-en GND D+ D- Vcc *TLERANCES *UNIT:mm ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED page of 12 Version 2.1 GND GND LV6 2.2nH ANTENNA C11 1uF GND R11 FB 100pF C43 R4 82K Y1 R10 10pF C38 5VD Power-EN GND 1.0pF LV5 C36 1nH GND 1uF GND GND GND 3.3VD 3.3VD GND GND C3 10uF R1 150K LV3 2.7nH R2 100K 1.2pF C20 5VD GND 5VD GND 1.2pF C21 PA0_OUT- PA0_OUT+ LV4 2.7nH GND GND 10pF 3.3VD C19 1RF0_PA_OUTN 10pF C17 1RF0_PA_OUTP GND 0.6 * ( 1+82K/18K ) = 3.3V GND 1.0pF GND LV1 4.7uH Power-EN RFOUT_G0 C27 C13 0.5pF C33 C4 0.1uF Vo = 0.6 * ( 1 + R3/R4) = GND R3 18K G5728 5VD C1 U- LV8 0.1uF 18nH 1.2VD GND 3.3VD GND 3.3VD C25 1uF C14 3.3VD GND 18nH LV7 RF0_PA_OUTN RF0_PA_OUTP R3 0R U+ 0.1uF C18 1.0pF C26 1uF 3.3VD C41 5.6pF C42 5.6pF GND 10 R8 24K GND 1uF C5 EE_CLK EE_MOSI EE_MISO VCCIO RF0_PA1_V33A RF0_OUTN RF0_OUTP RF0_PA2_V33A RF0_IN RF0_VX_LDO IC1 GND GND C32 0.1uF GND 0.1uF C10 GND GND VIN LX/SW GND FB EN 40 UDM UDP GND C31 1uF C30 0.1uF MT7601-QFN40-5X5 GND R5 8.2K GND C6 2.2uF GND 1uF C8 0.1uF C24 GND C7 0.1uF 3.3VD COMP DCDC_V33D PHASE LDO_RST_N WL_GPIO6 WL_GPIO5 WL_GPIO4 WL_GPIO3 WL_GPIO2 WL_GPIO1 C28 0.1uF GND 0.1uF C29 GND Q1 31 41 GND 3.3VD 39 12 XI 37 XTAL_V12A 1 38 3.3VD VOUT_1P2 BG_EXTR EEFL_CS 11 PLL_VX_LDO VDD 12 XTAL_V12A PADP 13 UDP XO 15 XTAL_XI 36 VDDA 3.3VD PADM 1.2VD 34 AVDD12 PMU_OUT VRES 16 VRES 17 1.2VD of 14 UDM XTAL_XO 35 ADC_VX_LDO 1.2VD 32 VDD 33 18 WL_GPIO0 20 VCCIO LDO_V15A PMU_OUT DCDC_V33A 19 3.3VD 10 FB page 21 22 23 24 25 26 27 28 29 30 GND 3.3VD RST_N 3.3VD C12 0.1uF GND XO XI GND C16 0.1uF R7 150K 3.3VD R9 U5 0 ohm RST_N XTAL/40MHz GND XO_0 2.5x3.2 5VD GND 47pF C34 2GND GND PRODUCTS SPECIFICATION WF75RL1510C Appendix 1 : Schematic Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 2 : SMT connector page 11 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 3 : Top & Bottom vertical view Connector view: page 12 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. The module must be installed in TV set. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Regulation information (1) This device and its antenna(s) must not be co-located or operating in conjunction with any other page 13 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C antenna or transmitter. (2) This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation between antenna and body. ⑶ ⑷ The end product must carry a label stating “Contains TX FCC ID: 2AC23-WF75RL1510C page 14 of 12 ”. Version 2.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2016:04:23 23:11:40+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2016:04:23 23:11:40+08:00 Format : application/pdf Title : Microsoft Word - WF75RL1510C_2.1_160106.doc Creator : Administrator Document ID : uuid:825d14f9-59ed-43ee-9b69-fd835df71655 Instance ID : uuid:cff8b669-0239-4a0d-aa9d-5286ae7ffb27 Page Count : 14 Author : AdministratorEXIF Metadata provided by EXIF.tools