HUIZHOU GAOSHENGDA TECHNOLOGY WT21M2610 WIFI+BT Module User Manual
Hui Zhou Gaoshengda Technology Co.,LTD WIFI+BT Module
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4099550 |
| Application ID | XgxyMDstlJHBjMzEdvc7dg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 38.96kB (486984 bits) |
| Date Submitted | 2018-12-09 00:00:00 |
| Date Available | 2018-12-09 00:00:00 |
| Creation Date | 2018-12-05 10:56:21 |
| Producing Software | Adobe Acrobat Pro 11.0.1 |
| Document Lastmod | 2018-12-05 18:27:43 |
| Document Title | User manual |
| Document Creator | Acrobat PDFMaker 11 Word 版 |
PRODUCT SPECIFICATION Version 1.0 802.11b/g/n Wi-Fi 2T2R / Bluetooth v5.0 Combo Chip over USB v2.0 interface Model Number: WT21M2610 (MediaTek ：MT7638GU ) 客户认可 Custom Approval Section Custom Name Department Approval Date： 拟制 DESIGN 审核 CHECK 批准 APPROVAL 秦楠 陈宇科 熊运自 2018-05-09 2018-05-09 2018-05-09 惠 州 高 盛 达 科 技 有 限 公 司 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 中国惠州仲恺高新技术开发区华宇路 75 号 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL：（0752）2096932 E-mail： qinn@gaosd.com PRODUCTS SPECIFICATION WT21M2610 Document revision history Revision Version 1.0 Date Approved by 2018-05-09 Remarks Draft PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 1. General Description MT7638G is highly integrated single chip which features a low power 2x2 11b/g/n dual-band Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi subsystem contains the 802.11b/g/n radio, baseband,and MAC that are designed to meet both the low power and high throughput application. MT7638G has a 32-bit RISC MCU that handles Wi-Fi and Bluetooth tasks, and an ARM Cortex-R4 MCU that could offload data frame processing in Wi-Fi host driver. The Bluetooth subsystem contains the Bluetooth radio, baseband, link controller. It also uses the 32-bit RISC MCU for the Bluetooth protocols. 2. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate. Support 20MHz, 40MHz,bandwidth in 2.4GHz band Dual-band 2T2R mode, data rate up to 300Mbps with USB2.0. Support STBC, LDPC, TX Beamformer and RX Beamformee Greenfield, mixed mode, legacy modes support IEEE 802.11 d/e/h/i/j/k/mc/r/v/w support Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI QoS support of WFA WMM, WMM PS Bluetooth specification 2.1+EDR Bluetooth 4.2 Low Energy (LE) Bluetooth 5.0 ROHS compliant PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 3.2.1.1 3.2.1.2 3.2.1.3 IEEE 802.11b Section Feature Detailed Description Standard Radio and Modulation Schemes Operating Frequency ● IEEE 802.11b ● DQPSK , DBPSK and CCK with DSSS ● 2400 ～ 2483.5MHz ISM band ● ● 13 channels for Worldwide 11 channels for USA 3.2.1.4 Channel Numbers 3.2.1.5 Data Rate Media Access Protocol ● at most 11Mbps ● CSMA/CA with ACK Transmitter Output Power at Antenna Connector ● 3.2.1.7 Typical RF Output Power at each RF chain,and at room Temp. 25℃ 3.2.1.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. @Frame (1000-byte PDUs) Error Rate<8% at room Temp 25℃ ● -83 dBm for 11Mbps 3.2.1.6 PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 3.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 3.2.2.2 3.2.2.3 3.2.2.4 3.2.2.5 3.2.2.6 3.2.2.7 3.2.2.8 Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector ● IEEE 802.11g ● QPSK , BPSK , 16QAM ,64QAM with OFDM ● 2400 ～ 2483.5MHz ISM band ● ● ● ● 13 channels for Worldwide / 11 channels for USA at most 54Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain, at room Temp. 25℃ ● Typical Sensitivity at each RF chain. @Frame (1000-byte PDUs) Error Rate<10% at room Temp 25℃ ● -71 dBm for 54Mbps 3.2.4 IEEE 802.11n Section 3.2.4.1 3.2.4.2 3.2.4.3 3.2.4.4 3.2.4.5 Feature Detailed Description Standard ● IEEE 802.11n ● BPSK , QPSK , 16QAM ,64QAM with OFDM Operating ● 2.4GHz :2400 ~ 2483.5MHz for ISM band Frequency ● 2.4GHz :2412~ 2462MHz for USA Data Rate at most 300 Mbps Radio and Modulation Type Media Access Protocol Transmitter Output 3.2.4.6 Power at Antenna Connector ● CSMA/CA with ACK ● Typical RF Output Power at each RF chain,and at roomTemp. 25℃ ● 2.4GHz Band/HT20 ● 2.4GHz Band/HT40 Typical Sensitivity at each RF chain. @Frame(1000-byte PDUs)Error Rate=10% and at room Temp. 25℃ 3.2.4.7 Receiver Sensitivity at Antenna Connector 2.4GHz Band/HT20 2.4GHz Band/HT40 ●-68dBm at MCS7 ● -66dBm at MCS7 PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 3.2.5Bluetooth Section Feather Description General specification Bluetooth standard Frequency band Channel Numbers Modulation Bluetooth V5.0 of 1,2,and3 Mbps 2402MHz-2480MHz 79 channels for BDR+EDR 40 channels for BLE GFSK, π/4-DQPSK and 8DPSK RF specification Min（dBm） Type（dBm） 12 -86 BDR Output Power BLE Output Power Sensitive @BER=0.1% FOR GFSK(1Mbps) Sensitive @BER=0.01% FOR π/4-DQPSK(2Mbps) Sensitive @BER=0.01% FOR 8DPSK(3Mbps) Maximum input level Sensitive @PER=30.8% FOR BLE 4. 4.1 -86 -80 GFSK(1Mbps) -20dBm π/4-DQPSK(2Mbps) -20dBm 8DQPSK(3Mbps) -20dBm -90 Electrical and Thermal Characteristics Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 Minimum -40 Maximum +80 60 125 Units C C C General Section Feature Detailed Description 5.2.1 5.2.2 5.2.3 Antenna Type Operating Voltage Current Consumption 5.2.4 Form Factor and Interface ● WIFI: PIFA Antenna ; ● 5V±10% ● ＜300mA@RX ● ＜1000mA@TX ● High Speed USB2.0 Interface 4.3 Max（dBm） Software Driver Security Win7, Linux, MAC 64/128-bits WEP, WPA, WPA2 PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 4.4 EEPROM Information BT Vendor ID default Product ID default WiFi Worldwide 2.4G Read from registry:Control by driver Reg Domain —— 4.5 Vendor ID default Product ID default DC Characteristics Symbol VIL VIH VOL VOH 5. Parameter Min TYPE Max Unit Input Low Voltage -0.3 VDD3.3*0.25 Input High Voltage VDD3.3*0.625 VDD3.3+0.3 Output Low Voltage -0.3 0.4 Output High Voltage VDD3.3-0.4 VDD3.3+0.3 Component preparation 关键器件清单 Key device list 物料名称 name of material 供应商品牌Supplier brand 晶宝时频/加高Jinbao time frequency/higher 晶振crystal oscillator 电阻resistance 华新科/国巨Huaxinke/guoju WIFI 芯片 WiFi SoC MTK 电容 capacitance Murata（村田）/华新科/国巨(murata)/hua xinke/guo ju 电感inductance Murata（村田）/佳邦/奇立新(murata)/karabong/kiriyoshi 柏承/富智祥/科翔Bai cheng/fu zhixiang/ke xiang 印制板printed board PAGE OF 8 Version 1.0 PRODUCTS SPECIFICATION WT21M2610 Mechanical Dimensions Pin Symbol Remark NC NC I/O NC NC BT-WAKE –HOST BT wake up host（内有10K电阻到3.3V上拉） GND Wake on Wireless LAN GND WOWLAN Power_EN （内有10K电阻到3.3V上拉） USB- DP Power_EN（低电平有效） GND USB Communication signal USB-DP I/O USB -DM USB Communication signal USB-DM I/O 10 5V VDD 5V GND *TLERANCES ARE +/-0.15mm UNLESS OTHERWISE SPECIFIED *UNIT:mm PAGE OF 8 Version 1.0 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. This device is intended only for OEM integrators under the following conditions: 1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, 3. For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the enduser regarding to Regulatory Domain change. As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Important Note: In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AC23-WT21M2610. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Antenna Information The WT21M2610 has been designed to pass certification with the antenna listed (for BT) below. The required antenna impedance is 50 ohms. The WT21M2610 has been designed to pass certification with ingrate antenna for WLAN. Model Type Connector WC0D-60 PIFA R-SMA Peak gain ( dBi ) 2400 – 2483.5 MHz 1.72 Description BT Antenna
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2018:12:05 10:56:21+08:00 Creator : Acrobat PDFMaker 11 Word 版 Modify Date : 2018:12:05 18:27:43+08:00 Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2018:12:05 18:27:43+08:00 Creator Tool : Acrobat PDFMaker 11 Word 版 Format : application/pdf Document ID : uuid:29510fdb-aaef-4398-a238-f64f08950742 Instance ID : uuid:47729c87-a394-47c8-b1cb-679ae9a577ec Producer : Adobe Acrobat Pro 11.0.1 Page Count : 10EXIF Metadata provided by EXIF.tools