HUNAN FN LINK TECHNOLOGY 3131A-S WIFI Module User Manual 15 3131A S UserMan r4
FN-LINK TECHNOLOGY LIMITED WIFI Module 15 3131A S UserMan r4
15_3131A-S UserMan r4
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3918103 |
| Application ID | JfvBJ080TDEIajdrnUlYUA== |
| Document Description | 15_3131A-S UserMan r4 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 74.03kB (925399 bits) |
| Date Submitted | 2018-07-10 00:00:00 |
| Date Available | 2018-07-10 00:00:00 |
| Creation Date | 2018-07-06 16:48:43 |
| Producing Software | Mac OS X 10.11.6 Quartz PDFContext |
| Document Lastmod | 2018-07-07 13:45:04 |
| Document Title | 15_3131A-S UserMan r4 |
WIFI Module Fn-Link 3131A-S User's Manual 3131A-S Revision History Version Date Description Draft Approved 1.0 2017-06-01 First release Colin Ming William Tan 1.1 2017-06-22 Modified input voltage range Colin Ming William Tan 1.1 2017-06-22 Colin Ming William Tan 1.2 2017-07-14 Modified Pin13、39、40 function Colin Ming William Tan 1.3 2017-08-04 Colin Ming William Tan Added 32.768K clock input requesting Modified SDIO specification description FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S CONTENTS 1. Introduction ..................................................................................................................... 1 2. Features ........................................................................................................................... 2 3. General Specification ..................................................................................................... 2 3.1 General Specification ................................................................................................. 2 4. WiFi RF Specification ..................................................................................................... 3 4.1 2.4GHz RF Specification............................................................................................ 3 5. Power Consumption ....................................................................................................... 5 6. Pin Assignments ............................................................................................................. 6 6.1 Pin Outline ................................................................................................................. 6 6.2 Pin Definition ............................................................................................................. 6 7. Dimensions...................................................................................................................... 8 7.1 Physical Dimensions ................................................................................................. 8 7.2 Module Physical Dimensions ..................................................................................... 9 7.3 Layout Recommendation ......................................................................................... 10 8. Host Interface Timing Diagram .................................................................................... 11 8.1 SDIO Pin Description ............................................................................................... 11 8.2 SDIO Default Mode Timing Diagram ....................................................................... 11 8.3 SDIO High Speed Mode Timing Diagram ................................................................ 12 8.4 SDIO Bus Timing Specifications in SDR Modes ...................................................... 13 9.Reference Design........................................................................................................... 14 10.Recommended Reflow Profile .................................................................................... 15 11. Packing Information .................................................................................................... 16 FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 1. Introduction 3131A-S is a small size and low profile of WiFi module, board size is 12mm*12mm with module thickness of 1.7mm. It can be easily manufactured on SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer products. It providesSDIO interface for WiFi. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11b/g/n SISO technology. 3131A-S uses highly integrated WiFi single chip based on advanced COMS process. 3131A-S integrates whole WiFi function blocks into a chip, such as SDIO/MPU, MAC, BB, AFE, RFE, PA, EEPROM and LDO/SWR, except fewer passive components remained on PCB. FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 2. Features Operate at ISM frequency bands (2.4GHz) SDIO interface for WiFi Low power dissipation High transmitting power High receiving sensitivity IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n. Enterprise level security which can apply WPA/WPA2 certification for WiFi. WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates 3. General Specification 3.1 General Specification Model Name 3131A-S Product Description Support WiFi functionality Dimension L x W x H: 12 x 12 x1.8 (typical) mm WiFi Interface Support SDIO Operating temperature -30°C to 70°C Storage temperature -40°C to 125°C 3.1.2 Recommended Operating Rating Min. Typ. Max. Unit -30 25 70 VCC33 3.3 3.6 4.8 deg.C VDDIO 1.8V Operating Temperature Note: Suggested power input range in 3.6V-4.5V. FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 4. WiFi RF Specification 4.1 2.4GHz RF Specification Feature Description Operating Frequency 2.412～2.462GHz Standards WiFi: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i Modulation WiFi: 802.11b: DSSS(1M,2Mbps), CCK(11, 5.5Mbps), 802.11 g/n: OFDM PHY Data rates WiFi: 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps Transmit Output Power WiFi: 802.11b ≦ 18.5 802.11g ≦ 16.5 802.11n ≦ 15.5 ≦ 14.5 EVM dBm dBm dBm (MCS 7_HT20) dBm (MCS 7_HT40) 802.11b /1Mbps : EVM≦-10dB 802.11b /11Mbps : EVM≦-10dB 802.11g /6Mbps : EVM≦-5dB 802.11g /54Mbps : EVM≦-25dB 802.11n /6.5Mbps : EVM≦-5dB 802.11n /65Mbps : EVM≦-28dB 802.11n /13.5Mbps : EVM≦-5dB 802.11n /135Mbps : EVM≦-28dB Receiver Sensitivity (WiFi) 802.11b@10% PER 1Mbps ≦-98dBm 2Mbps≦ -94dBm 5.5Mbps≦ -93dBm 11Mbps ≦-90dBm Max input level≥-8 802.11g@10% PER 6Mbps ≦-94dBm 9Mbps ≦ -92dBm FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 12Mbps≦ -91dBm 18Mbps≦ -89dBm 24Mbps≦ -86dBm 36Mbps≦ -82dBm 48Mbps ≦-78dBm 54Mbps ≦-77dBm Max input level≥-20 802.11n@10% PER HT20_MCS 0 ≦-93dBm HT20_MCS 1≦ -90dBm HT20_MCS 2 ≦-88dBm HT20_MCS 3 ≦-85dBm HT20_MCS 4 ≦-82dBm HT20_MCS 5 ≦-78dBm HT20_MCS 6 ≦-76dBm HT20_MCS 7 ≦-75dBm Max input level≥-20 Operating Channel Media Access Control Antenna HT40_MCS 0≦-90 HT40_MCS 1≦-87 HT40_MCS 2≦-85 HT40_MCS 3≦-82 HT40_MCS 4≦-79 HT40_MCS 5≦-75 HT40_MCS 6≦-73 HT40_MCS 7≦-71 WiFi 2.4GHz: 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe WiFi: CSMA/CA with ACK See page 18 Network Architecture Ad-hoc mode (Peer-to-Peer ) Infrastructure mode Software AP WiFi Direct Security WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i OS Supported Android /Linux Host Interface SDIO2.0 Operating Voltage 3.3-4.8V Vdc, Dimension Typical 12*12*1.8 mm FN-LINK TECHNOLOGY LIMITED 1.8V I/O supply voltage Proprietary & Confidential Information 3131A-S 5. Power Consumption TX Mode: (Throughput mode) 230mA (MCS7/BW40/16dBm) Power Consumption (Typical by using SWR) RX Mode: (Throughput mode) 66mA (MCS7/BW40/-60dBm) Associated Idle power saving with DTIM=3 0.38mA Deep Sleep: 0.04mA FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 6. Pin Assignments 6.1 Pin Outline 6.2 Pin Definition NO Name Type Description GND － Ground connections WL_ANT I/O RF I/O port GND － Ground connections NC － Floating (Don’t connected to ground) NC － Floating (Don’t connected to ground) Host wake device Host Wake up WiFi, rising edge trigger GPIO3 I/O Floating (Don’t connected to ground) NC － Floating (Don’t connected to ground) VCC Main power voltage source input 3.3V-4.8V 10 NC － Floating (Don’t connected to ground) 11 NC － Floating (Don’t connected to ground) 12 PMU_POWRON Enable pin for WLAN device ON: pull high ; OFF: pull low 13 GPIO1 I/O SDIO data interrupt 14 SDIO_DATA_2 I/O SDIO data line 2 15 SDIO_DATA_3 I/O SDIO data line 3 16 SDIO_DATA_CMD I/O SDIO command line FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 17 SDIO_DATA_CLK SDIO clock line 18 SDIO_DATA_0 I/O SDIO data line 0 19 SDIO_DATA_1 I/O SDIO data line 1 20 GND － Ground connections 21 NC － Floating (Don’t connected to ground) 22 VDDIO I/O Voltage supply input 1.8V 23 NC － Floating (Don’t connected to ground) 24 RTC_CLK Exteral 32.768Khz clock input for Power saving 25 NC － Floating (Don’t connected to ground) 26 NC － Floating (Don’t connected to ground) 27 NC － Floating (Don’t connected to ground) 28 NC － Floating (Don’t connected to ground) 29 NC － Floating (Don’t connected to ground) 30 NC － Floating (Don’t connected to ground) 31 GND － Ground connections 32 NC － Floating (Don’t connected to ground) 33 GND － Ground connections 34 GPIO2 I/O Floating (Don’t connected to ground) 35 NC － Floating (Don’t connected to ground) 36 GND － Ground connections 37 NC － Floating (Don’t connected to ground) 38 NC － Floating (Don’t connected to ground) WiFi reset pin, internal pull high. Low: reset enable, High: reset disable WiFi wake up host, rising edge trigger for host, high level trigger for MCU. 39 40 WL_RST Dev_Wake_Host 41 NC － Floating (Don’t connected to ground) 42 NC － Floating (Don’t connected to ground) 43 NC － Floating (Don’t connected to ground) 44 NC － Floating (Don’t connected to ground) FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 7. Dimensions 7.1 Physical Dimensions (Unit: mm) < TOP VIEW > < Side View > 1.7±0.1 FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 7.2 Module Physical Dimensions (Unit: mm) < TOP VIEW > FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 3131A-S 7.3 Layout Recommendation (Unit: mm) < TOP VIEW > FN-LINK TECHNOLOGY LIMITED Information 10 Proprietary & Confidential 3131A-S 8. Host Interface Timing Diagram 8.1 SDIO Pin Description The module supports SDR12(25MHz) and SDR25(50MHz, dual rates) in addition to the 1.8V default speed(25MHz) and high speed (50 MHz). It has the ability to stop the SDIO clock and map the interrupt signal into a GPIO pin. This ‘out-of-band’ interrupt signal notifies the host when the WLAN device wants to turn on the SDIO interface. The ability to force the control of the gated clocks from within the WLAN chip is also provided. SDIO Pin Description SD 4-Bit Mode DATA0 Data Line 0 DATA1 Data Line 1 or Interrupt DATA2 Data Line 2 or Read Wait DATA3 Data Line 3 CLK Clock CMD Command Line 8.2 SDIO Default Mode Timing Diagram FN-LINK TECHNOLOGY LIMITED Information 11 Proprietary & Confidential 3131A-S 8.3 SDIO High Speed Mode Timing Diagram FN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information 3131A-S 8.4 SDIO Bus Timing Specifications in SDR Modes Clock timing(SDR Modes) FN-LINK TECHNOLOGY LIMITED 13 Proprietary & Confidential Information 3131A-S 9.Reference Design FN-LINK TECHNOLOGY LIMITED Information 14 Proprietary & Confidential 3131A-S 10. Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : 2 times 250℃ 2.5- 40~70 sec 2.5℃/se FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information 3131A-S 11. Packing Information Tape and Reel Package Using self-adhesive tape Size of black tape: 24mm*32.6m Color of plastic disc: blue A roll of 2000pcs the cover tape: 21.3mmm*32.6m NY bag size:460mm*385mm FN-LINK TECHNOLOGY LIMITED size ：350*350*35mm 16 Proprietary & Confidential Information 3131A-S The packing case size:350*210*370mm FN-LINK TECHNOLOGY LIMITED 17 Proprietary & Confidential Information 3131A-S This module has been designed to operate with a PIFA antenna having a maximum gain of 2dBi. Only this type of antenna may be used, the manufacturer recommended antenna as below: Ant. (Chain) Brand Model name Antenna Type Connector Gain (dBi) XK XKFPC-2D4-5D8-1 50 PIFA I-PEX 0.0 XK XK-QX2400-PCB-1 40 PIFA I-PEX 2.0 Note: 1. This module has only one antenna port 2. Antenna 1 and antenna 2 are used for different customers. FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FN-LINK TECHNOLOGY LIMITED 18 Proprietary & Confidential Information 3131A-S Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following "Contains TX FCC ID:" 2AATL-3131A-S", and the FCC part 15.19 statement has to be available on the label: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If the end product is so small or for such use that it is not practicable to place the statement specified, the statement shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. Note:The module is limited to OEM installation ONLY;The OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove or install module. This product is mounted inside of the end product only by professional installers OEM. They use this module with changing the power and control signal setting by software of end product within the scope of this application. End user can not change this setting. The equipment complies with RF exposure limits. This module is limited to installation in mobile or fixed applications. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The module must in the end-product be installed in such manner that the authorized antennas can be used, any change of the antenna will void the certification. FN-LINK TECHNOLOGY LIMITED 19 Proprietary & Confidential Information
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2018:07:06 16:48:43Z Modify Date : 2018:07:07 13:45:04+08:00 Subject : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2018:07:07 13:45:04+08:00 Producer : Mac OS X 10.11.6 Quartz PDFContext Format : application/pdf Description : Creator : Title : Document ID : uuid:57fccabe-2f30-4faf-8a63-f18740af7a67 Instance ID : uuid:91ee680f-3587-4d12-9e87-cca9aabf3fea Page Count : 22EXIF Metadata provided by EXIF.tools