HUNAN FN LINK TECHNOLOGY 6110R-IF WIFI Module User Manual 15 6110R IF UserMan

FN-LINK TECHNOLOGY LIMITED WIFI Module 15 6110R IF UserMan

UserManual.wiki >

HUNAN FN LINK TECHNOLOGY >

6110R IF User Manual

15_6110R-IF UserMan

欧智通科技 Fn-Link 6110R-IF WiFi Single-band 1X1 11n Product Specification Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 1 Proprietary & Confidential Information Revision History Version Date Modifications Draft Approved 1.0 2016-12-26 Initial release Colin Ming WILLIAM TAN1.1 2017-01-17 Add reference design Colin Ming WILLIAM TAN1.2 2017-02-15 Modified module height Colin Ming WILLIAM TAN1.3 2017-04-05 Modified operating temperature Colin Ming WILLIAM TAN Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 1 Proprietary & Confidential Information 1. Introduction 6110R-IF is a highly integrated module with low power 802.11n Wireless LAN(WLAN) network controller. It combines an ARM-CM3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF function. It also provides a bunch of configurable GPIO which are configured as digital peripherals for different applications and control usage. 6110R-IF integrates internal memories for complete WIFI protocol functions. 6110R-IF integrates 1MB ROM to provide high access speed, low leakage memory. The ROM memory clock speed is up to 166MHz.The ROM lib provides the following functions: z Boot Code and MCU initialization. z Default UART driver. z Non-flash booting functions and drivers. z Peripheral libs. z Security functions libs. Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 2 Proprietary & Confidential Information 2. Features General z 22.6mm*13.0mm*2.1mm z CMOS MAC, Baseband PHY, and RF in the module for 802.11b/g/n compatible WLAN z Complete 802.11n solution for 2.4G band z 150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth Standards Supported z 802.11b/g/n compatible WLAN z 802.11e QoS Enhancement(WMM) z 802.11i(WPA,WP2). Open, shared key, and pair-wise key authentication services z WiFi Direct support z Light Weight TCP/IP protocol WLAN PHY Features z 802.11n OFDM z One Transmit and one Receive path(1T1R) z 20MHz and 40MHz bandwidth transmission z Short Guard Interval(400ns) z Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n Host Interface z 2 high speed UART z 1 I2C z GPIO The general block diagram for the module is shown in Figure 1 Figure 1 Fn-Link Confidential RTL8711AF

6110R-IF FN-LINK TECHNOLOGY LIMITED 3 Proprietary & Confidential Information 3. General specification 3.1 General Information Model Name 6110R-IF Main Chipset Realtek RTL8710AF/ RTL8711AF Host Interface UART,GPIO,SDIO(8711AF) Wifi Standards 802.11b/g/n Other RF Standards N/ADimension L22.5mm*W13.0mm*H2.1mm 3.2 Operating Conditions Operating Voltage 3.3±10% Vdc Operating Temperature -20°C to +85°C Storage Temperature -40°C to +80°C Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 4 Proprietary & Confidential Information 4. WIFI RF Specification 4.1 2.4GHz RF Specification Operating Frequency 2.400～2.4835GHz Channels WiFi: USA/Canada: channel 1~11; Europe/China/Australia: channel 1~13; Japan: channel 1~14 Modulation WiFi: 802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps);802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps), 16QAM(36,24Mbps), 64QAM(54,48Mbps); 802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps) PHY Data rates WiFi: 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps Output Power WiFi: 802.11b 16.5dBm EVM 802.11b EVM≦35% 802.11g EVM≦-25dB 802.11n EVM≦-28dB Sensitivity WiFi: 802.11b@8% PER 1Mbps -88dBm 2Mbps -87dBm 5.5Mbps -85dBm 11Mbps -82dBm 802.11g@10% PER 6Mbps -86dBm 9Mbps -85dBm 12Mbps -84dBm 18Mbps -82dBm 24Mbps -80dBm 36Mbps -77dBm 48Mbps -73dBm 54Mbps -71dBm 802.11n_HT20@10% PER MCS 0 -83dBm MCS 1 -82dBm MCS 2 -80dBm Fn-Link Confidential ≦802.11g 14.5dBm ≦802.11n 13.5dBm ≦

6110R-IF FN-LINK TECHNOLOGY LIMITED 5 Proprietary & Confidential Information MCS 3 -78dBm MCS 4 -75dBm MCS 5 -71dBm MCS 6 -69dBm MCS 7 -67dBm Network Architecture WiFi: Ad-hoc mode (Peer-to-Peer ) Infrastructure mode WiFi Direct Security 802.11i(WPA,WP2). Open, shared key, and pair-wise key authentication services Antenna Integral Antenna (PCBA) Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 6 Proprietary & Confidential Information 5. Pin Assignments 5.1 Pin outline Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 7 Proprietary & Confidential Information 5.2 Pin Definition Pin# Name Description 1 AGND Ground connections 2 RF_IO WLAN RF Signal 3 AGND Ground connections 4 GPIOE_4 GPIO Pin. The MUX Function can be referred to Pin Function Table 5 GPIOE_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 6 GPIOE_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 7 GPIOE_1 GPIO Pin. The MUX Function can be referred to Pin Function Table 8 GPIOE_0 GPIO Pin. The MUX Function can be referred to Pin Function Table 9 CHIP_EN Enable chip. 1: Enable Chip,0: Shut Down Chip. 10 AGND Ground connections 11 VA33 3.3V Input 12 GPIOA_0 GPIO Pin. The MUX Function can be referred to Pin Function Table 13 GPIOA_1 GPIO Pin. The MUX Function can be referred to Pin Function Table 14 GPIOA_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 15 GPIOA_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 16 GPIOA_4 GPIO Pin. The MUX Function can be referred to Pin Function Table 17 GPIOA_5 GPIO Pin. The MUX Function can be referred to Pin Function Table 18 AGND Ground connections 19 GPIOC_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 20 GPIOC_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 21 GPIOC_1 GPIO Pin. The MUX Function can be referred to Pin Function Table 22 GPIOC_0 GPIO Pin. The MUX Function can be referred to Pin Function Table 23 GPIOC_4 GPIO Pin. The MUX Function can be referred to Pin Function Table 24 GPIOC_5 GPIO Pin. The MUX Function can be referred to Pin Function Table Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 8 Proprietary & Confidential Information 25 GPIOB_0 GPIO Pin. UART1_OUT(multiplexing) 26 GPIOB_1 GPIO Pin. UART1_IN(multiplexing) 27 GPIOB_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 28 GPIOB_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 29 IP Input Differential Signal 30 IN Input Differential Signal 31 AGND Ground connections 5.2.1 Pin Function Group Table (For 8710) Note1: PH = Pull-High, HI = High-impedance Note2: Others’ pull control can be done by register setting. Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 9 Proprietary & Confidential Information (For 8711) Note1: PH = Pull-High, HI = High-impedance Note2: GPIOA_1 needs external circuit to do the pull high control; Others’ pull control can be done by register setting(including GPIOA_1’s PD). 6. Ordering Information Part No. Description FG6110RRF0-00 SOC model RTL8710AF. FG6110RRF1-00 SOC model RTL8711AF Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 10 Proprietary & Confidential Information 7. Dimensions 7.1 Physical Outline (unit: mm) 2.10 Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 11 Proprietary & Confidential Information 7.2 Physical Dimensions (unit: mm) Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information 7.3 Layout Recommendation (unit: mm) Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 13 Proprietary & Confidential Information 8. Reference Design Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information 9.2 Patch WIFI modules installed before the notice: WIFI module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ℃for the MID motherboard. About the module packaging, storage and use of matters needing attention are as follows: 1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storage environment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h. 2. The module vacuum packing once opened, time limit of the assembly: Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption. 2.) factory environmental temperature humidity control: ≦30 ℃, ≦60% r.h.. 3). Once opened, the workshop the preservation of life for 168 hours. 3. Once opened, such as when not used up within 168 hours: 1). The module must be again to remove the module moisture absorption. 2). The baking temperature: 125 ℃, 8 hours. 3.) After baking, put the right amount of desiccant to seal packages. Fn-Link Confidential

6110R-IF FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information 10. Package Information Layer size: L300.0*W240.0 mm Layer material: PVC Carton size: L310.0*W260.0*H220.0 mm Carton material: A=A Fn-Link Confidential

WARING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following "Contains TX FCC ID: 2AATL-6110R-IF". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. IMPORTANT NOTE: Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. EU Regulatory Conformance Hereby, we (FN-Link Technology Limited) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Navigation menu