HUNAN FN LINK TECHNOLOGY 6223E-UUD WIFI+BT Module User Manual WMDM 110G

FN-LINK TECHNOLOGY LIMITED WIFI+BT Module WMDM 110G

15_6223E-UUD UserMan

欧智通科技Fn-Link6223E-UUDWiFi Single-band 1X1 +Bluetooth v2.1+EDR/Bluetooth3.0/3.0+HS/4.2 User's Manual
6223E-UUDFN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential InformationRevision HistoryVersion Date Description Draft Approved1.0 2016-09-26 First release Colin Ming William Tan1.1 2017-02-24 Interface modified. Colin Ming William Tan1.2 2017-06-14 Added RF pin description Colin Ming William Tan
6223E-UUDFN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential InformationCONTENTS1. Introduction..............................................................................................................................12. Features.................................................................................................................................... 23. General Specification............................................................................................................ 33.1 General Specification............................................................................................................................. 34. WiFi/BT RF Specification......................................................................................................44.1 2.4GHz RF Specification....................................................................................................................... 45. Power Consumption.............................................................................................................. 66. Pin Assignments.....................................................................................................................76.1 Pin Outline................................................................................................................................................76.2 Pin Definition............................................................................................................................................77. Dimensions.............................................................................................................................. 97.1 Physical Dimensions.............................................................................................................................. 97.2 Module Physical Dimensions..............................................................................................................107.3 Layout Recommendation.....................................................................................................................118. Reference Design.................................................................................................................129. Recommended Reflow Profile.......................................................................................... 1210. Package Information......................................................................................................... 13
6223E-UUDFN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential Information1. Introduction6223E-UUD is a small size and low profile of WiFi + BT Combo module, board size is12.2mm*13mm with module thickness of 1.7mm. It can be easily manufactured onSMT process and highly suitable for tablet PC, ultra book, mobile device andconsumer products. It provides USB interface for WiFi and Bluetooth. The WiFithroughput can go up to 150Mbps in theory by using 1x1 802.11n SISO technologyand Bluetooth can support BT2.1+EDR/BT3.0 and BT4.2.6223E-UUD uses highly integrated WiFi/BT single chip based on advanced COMSprocess. 6223E-UUD integrates whole WiFi/BT function blocks into a chip, such asUSB/PCM, MAC, BB, AFE, RFE, PA, EEPROM and LDO/SWR, except fewer passivecomponents remained on PCB.This compact module is a total solution for a combination of Wi-Fi + BT technologies.The module is specifically developed for Smart phones and Portable devices.
6223E-UUDFN-LINK TECHNOLOGY LIMITED 2Proprietary & Confidential Information2. FeaturesOperate at ISM frequency bands (2.4GHz)USB for WiFi and BluetoothIEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d,IEEE 802.11e, IEEE 802.11h, IEEE 802.11iFully Qualified for Bluetooth 2.1+EDR specification including both 2Mbps and3Mbps modulation modeFully qualified for Bluetooth 3.0Fully qualified for Bluetooth 4.2 Dual modeFull–speed Bluetooth operation with Piconet and Scatternet supportEnterprise level security which can apply WPA/WPA2 certification for WiFiWiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbpsdownstream and 150 Mbps upstream PHY rates
6223E-UUDFN-LINK TECHNOLOGY LIMITED 3Proprietary & Confidential Information3. General Specification3.1 General Specification3.1.2 Recommended Operating RatingMin. Typ. Max. UnitOperating Temperature 0 25 70 deg.CVCC33 3.15 3.3 3.45 VModel Name 6223E-UUDProduct Description Support WiFi/Bluetooth functionalitiesDimension L x W x H: 12.2 x 13 x1.7 (typical) mmWiFi Interface Support USB2.0BT Interface Support USB2.0Operating temperature 0°C to 70°CStorage temperature -40°C to 85°C
6223E-UUDFN-LINK TECHNOLOGY LIMITED 4Proprietary & Confidential Information4. WiFi/BT RF Specification4.1 2.4GHz RF SpecificationFeature DescriptionOperating Frequency 2.400～2.4835GHzStandardsWiFi:IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,IEEE 802.11d, IEEE 802.11e, IEEE 802.11h,IEEE 802.11iBT:V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.2ModulationWiFi:802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps),BPSK(1Mbps),802.11 g/n: OFDMBT:8DPSK, π/4 DQPSK, GFSKPHY Data ratesWiFi:802.11b: 11,5.5,2,1 Mbps802.11g: 54,48,36,24,18,12,9,6 Mbps802.11n: up to 150MbpsBT:1 Mbps for Basic Rate2,3 Mbps for Enhanced Data RateEVM802.11b /1Mbps : EVM≦-10dB802.11b /11Mbps : EVM≦-10dB802.11g /6Mbps : EVM≦-5dB802.11g /54Mbps : EVM≦-25dB802.11n /6.5Mbps : EVM≦-5dB802.11n /65Mbps : EVM≦-28dB802.11n /13.5Mbps : EVM≦-5dB802.11n /135Mbps : EVM≦-28dB
6223E-UUDFN-LINK TECHNOLOGY LIMITED 5Proprietary & Confidential Information802.11n /13.5Mbps : EVM≦-5dB802.11n /135Mbps : EVM≦-28dBReceiver Sensitivity(WiFi)802.11b@8% PER1Mbps ≦-91dBm2Mbps ≦-89dBm5.5Mbps ≦-87dBm11Mbps ≦-85dBm Max input level≥-8802.11g@10% PER6Mbps ≦-87dBm9Mbps ≦-86dBm12Mbps ≦-84dBm18Mbps ≦-82dBm24Mbps ≦-79dBm36Mbps ≦-75dBm48Mbps ≦-71dBm54Mbps ≦-70dBm Max input level≥-20802.11n@10% PERHT20_MCS 0 ≦-87dBm HT40_MCS 0≦-84HT20_MCS 1 ≦-84dBm HT40_MCS 1≦-81HT20_MCS 2 ≦-82dBm HT40_MCS 2≦-79HT20_MCS 3 ≦-79dBm HT40_MCS 3≦-76HT20_MCS 4 ≦-75dBm HT40_MCS 4≦-72HT20_MCS 5 ≦-71dBm HT40_MCS 5≦-68HT20_MCS 6 ≦-70dBm HT40_MCS 6≦-67HT20_MCS 7 ≦-69dBm HT40_MCS 7≦-66Max input level≥-20Receiver Sensitivity(BT)-89dBm @ 1Mbps-86dBm @ 2Mbps-83dBm @ 3MbpsOperating ChannelWiFi 2.4GHz:11: (Ch. 1-11) – United StatesBT 2.4GHz: Ch. 0 ~78
6223E-UUDFN-LINK TECHNOLOGY LIMITED 6Proprietary & Confidential InformationMedia Access ControlWiFi:CSMA/CA with ACKBT:AFH, Time DivisionAntenna External AntennaNetwork ArchitectureWiFi:Ad-hoc mode (Peer-to-Peer )Infrastructure modeSoftware APWiFi DirectBT:Pico Net, Scatter NetSecurityWiFi:WPA, WPA-PSK, WPA2, WPA2-PSK,WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11iBT:Simple ParingOS Supported Android /Linux/ Win CE /iOS /XP/WIN7Host Interface WiFi: USBBT: USBOperating Voltage 3.3±10% Vdc I/O supply voltageDimension Typical L12.0*W12.0*H1.7mm5. Power Consumptionpower Consumption(Typical by using SWR)WiFi only:TX Mode: (Throughput mode) 170mA (MCS7/BW40/13dBm)RX Mode: (Throughput mode) 130mA (MCS7/BW40/-60dBm)Associated Idle power saving with DTIM=3 2.1mAUnassociated Idle: 0.1mARF disable Mode: 0.1mABT:Inquiry & Page Scan: 0.9 mAACL no traffic: 7.5mASCO HV3: 15.0mA
6223E-UUDFN-LINK TECHNOLOGY LIMITED 7Proprietary & Confidential Information6. Pin Assignments6.1 Pin Outline< TOP VIEW >6.2 Pin DefinitionNO Name Type Description1GND －Ground connections2ANT 0 I/O BT/WiFi RF I/O for single Antenna , BT RF I/O for dualantenna3ANT1 I/O WiFi RF I/O only for dual antenna4GND －Ground connections5PCM_IN I PCM data in6PCM_OUT O PCM data output7PCM_SYNC I/O PCM sync signal8PCM_CLK I/O PCM clock9BT_WAKE_HOST O Bluetooth device wake up host10 HOST_WAKE_BT I Host wake up Bluetooth device11 VDD33 －Main power voltage source input 3.3V
6223E-UUDFN-LINK TECHNOLOGY LIMITED 8Proprietary & Confidential Information12 USB_DM I/O USB2.0 differential pair for WLAN And Bluetooth13 USB_DP I/O USB2.0 differential pair for WLAN And Bluetooth14 GND －Ground connections15 3DD_SEL －Not connecting16 WL_EN I WLAN enable17 BT_EN I Bluetooth enable18 NC I Not connecting19 HOST_WAKE_WL I Host wake up WLAN device20 WL_WAKE_HOST O WLAN device wake up host
6223E-UUDFN-LINK TECHNOLOGY LIMITED 9Proprietary & Confidential Information7. Dimensions7.1 Physical Dimensions(Unit: mm)< TOP VIEW > < Side View >Marking Description< TOP VIEW >
6223E-UUDFN-LINK TECHNOLOGY LIMITED 10 Proprietary & Confidential Information7.2 Module Physical Dimensions(Unit: mm)< TOP VIEW >
6223E-UUDFN-LINK TECHNOLOGY LIMITED 11 Proprietary & Confidential Information7.3 Layout Recommendation(Unit: mm)< TOP VIEW >
6223E-UUDFN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information8. Reference Design9. Recommended Reflow ProfileReferred to IPC/JEDEC standard.Peak Temperature : <250°CNumber of Times : 2 times
6223E-UUDFN-LINK TECHNOLOGY LIMITED 13 Proprietary & Confidential Information10. Package Informationthe take-up packageUsing self-adhesive tapeSize of black tape:24mm*32.6m the cover tape :2.13mmm*32.6mColor of plastic disc: blueA roll of 2000pcsNY bag size:460mm*385mm size ：350*350*35mm
6223E-UUDFN-LINK TECHNOLOGY LIMITED 14 Proprietary & Confidential InformationThe packing case size: 350*210*370mm
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following "Contains TX FCC ID: 2AATL-6223E-UUD". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to missing shielding the module is strictly limited to integration by the Grantee himself or his dedicated OEM integrator under control of the Grantee. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information
IMPORTANT NOTE: This device is intended only for OEM integrators under the following conditions: (1) According to FCC Part 15 Subpart C Section 15.212, the radio elements of the modular transmitter must have their own shielding. However, due to there is no shielding for this WIFI/BT module, this module is granted as a Limited Modular Approval. (2) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter. then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. The module has no shielding and tested stand alone. This module is tested and approved as Limited modular approval with stand alone configuration, any OEM incorporated this radio module into any system are require additional testing and evaluation. This module has been designed to operate with a PIFA antenna having a maximum gain of 2.99dBi. Only this type of antenna may be used, the manufacturer recommended antenna as below: No. Brand Model name Antenna Type Connector Gain (dBi) 1 ZHONGTIAN XUN 2.00001213 PIFA I-PEX 2.99 2 XK XKFPC-2D4-5D8-150 PIFA I-PEX 0.0 3 XK XK-QX2400-PCB-140 PIFA I-PEX 2.0 4 ZHONGTIAN XUN 2.00001050 PIFA I-PEX 0.38 The module must in the end-product be installed in such manner that the authorized antennas can be used, any change of the antenna will void the certification. EU Regulatory Conformance Hereby, we(FN-LINK TECHNOLOGY LIMITED) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information

Navigation menu