HUNAN FN LINK TECHNOLOGY 6223E-UUD WIFI+BT Module User Manual WMDM 110G
FN-LINK TECHNOLOGY LIMITED WIFI+BT Module WMDM 110G
15_6223E-UUD UserMan
欧智通科技 Fn-Link 6223E-UUD WiFi Single-band 1X1 + Bluetooth v2.1+EDR/Bluetooth 3.0/3.0+HS/4.2 User's Manual 6223E-UUD Revision History Version Date 1.0 2016-09-26 1.1 1.2 Description Draft Approved First release Colin Ming William Tan 2017-02-24 Interface modified. Colin Ming William Tan 2017-06-14 Added RF pin description Colin Ming William Tan FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD CONTENTS 1. Introduction..............................................................................................................................1 2. Features.................................................................................................................................... 2 3. General Specification............................................................................................................ 3 3.1 General Specification............................................................................................................................. 3 4. WiFi/BT RF Specification......................................................................................................4 4.1 2.4GHz RF Specification....................................................................................................................... 4 5. Power Consumption.............................................................................................................. 6 6. Pin Assignments.....................................................................................................................7 6.1 Pin Outline................................................................................................................................................7 6.2 Pin Definition............................................................................................................................................7 7. Dimensions.............................................................................................................................. 9 7.1 Physical Dimensions.............................................................................................................................. 9 7.2 Module Physical Dimensions..............................................................................................................10 7.3 Layout Recommendation.....................................................................................................................11 8. Reference Design.................................................................................................................12 9. Recommended Reflow Profile.......................................................................................... 12 10. Package Information......................................................................................................... 13 FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 1. Introduction 6223E-UUD is a small size and low profile of WiFi + BT Combo module, board size is 12.2mm*13mm with module thickness of 1.7mm. It can be easily manufactured on SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer products. It provides USB interface for WiFi and Bluetooth. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11n SISO technology and Bluetooth can support BT2.1+EDR/BT3.0 and BT4.2. 6223E-UUD uses highly integrated WiFi/BT single chip based on advanced COMS process. 6223E-UUD integrates whole WiFi/BT function blocks into a chip, such as USB/PCM, MAC, BB, AFE, RFE, PA, EEPROM and LDO/SWR, except fewer passive components remained on PCB. This compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is specifically developed for Smart phones and Portable devices. FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 2. Features Operate at ISM frequency bands (2.4GHz) USB for WiFi and Bluetooth IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i Fully Qualified for Bluetooth 2.1+EDR specification including both 2Mbps and 3Mbps modulation mode Fully qualified for Bluetooth 3.0 Fully qualified for Bluetooth 4.2 Dual mode Full–speed Bluetooth operation with Piconet and Scatternet support Enterprise level security which can apply WPA/WPA2 certification for WiFi WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 3. General Specification 3.1 General Specification Model Name 6223E-UUD Product Description Support WiFi/Bluetooth functionalities Dimension L x W x H: 12.2 x 13 x1.7 (typical) mm WiFi Interface Support USB2.0 BT Interface Support USB2.0 Operating temperature 0°C to 70°C Storage temperature -40°C to 85°C 3.1.2 Recommended Operating Rating Operating Temperature VCC33 FN-LINK TECHNOLOGY LIMITED Min. Typ. Max. Unit 25 70 3.15 3.3 3.45 deg.C Proprietary & Confidential Information 6223E-UUD 4. WiFi/BT RF Specification 4.1 2.4GHz RF Specification Feature Description Operating Frequency 2.400~2.4835GHz Standards WiFi: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i BT: V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.2 Modulation WiFi: 802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps), 802.11 g/n: OFDM BT: 8DPSK, π/4 DQPSK, GFSK WiFi: 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps PHY Data rates BT: 1 Mbps for Basic Rate 2,3 Mbps for Enhanced Data Rate 802.11b /1Mbps : EVM≦-10dB EVM 802.11b /11Mbps : EVM≦-10dB 802.11g /6Mbps : EVM≦-5dB 802.11g /54Mbps : EVM≦-25dB 802.11n /6.5Mbps : EVM≦-5dB 802.11n /65Mbps : EVM≦-28dB 802.11n /13.5Mbps : EVM≦-5dB 802.11n /135Mbps : EVM≦-28dB FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 802.11n /13.5Mbps : EVM≦-5dB 802.11n /135Mbps : EVM≦-28dB 802.11b@8% PER 1Mbps ≦-91dBm 2Mbps ≦ -89dBm 5.5Mbps ≦ -87dBm 11Mbps ≦ -85dBm Max input level≥-8 802.11g@10% PER 6Mbps ≦ -87dBm 9Mbps ≦ -86dBm 12Mbps ≦ -84dBm 18Mbps ≦ -82dBm Receiver Sensitivity (WiFi) 24Mbps 36Mbps 48Mbps 54Mbps ≦ ≦ ≦ ≦ -79dBm -75dBm -71dBm -70dBm Max input level≥-20 802.11n@10% PER HT20_MCS 0 ≦-87dBm HT20_MCS 1 ≦-84dBm HT20_MCS 2 ≦-82dBm HT20_MCS 3 ≦-79dBm HT20_MCS 4 ≦-75dBm HT20_MCS 5 ≦-71dBm HT20_MCS 6 ≦-70dBm HT20_MCS 7 ≦-69dBm Max input level≥-20 Receiver Sensitivity (BT) HT40_MCS 0≦-84 HT40_MCS 1≦-81 HT40_MCS 2≦-79 HT40_MCS 3≦-76 HT40_MCS 4≦-72 HT40_MCS 5≦-68 HT40_MCS 6≦-67 HT40_MCS 7≦-66 -89dBm @ 1Mbps -86dBm @ 2Mbps -83dBm @ 3Mbps WiFi 2.4GHz: 11: (Ch. 1-11) – United States Operating Channel BT 2.4GHz: Ch. 0 ~78 FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD Media Access Control WiFi: CSMA/CA with ACK BT: AFH, Time Division Antenna External Antenna WiFi: Ad-hoc mode (Peer-to-Peer ) Infrastructure mode Software AP WiFi Direct Network Architecture BT: Pico Net, Scatter Net WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i Security BT: Simple Paring OS Supported Host Interface Android /Linux/ Win CE /iOS /XP/WIN7 WiFi: USB BT: USB Operating Voltage 3.3±10% Vdc I/O supply voltage Dimension Typical L12.0*W12.0*H1.7mm 5. Power Consumption power Consumption (Typical by using SWR) WiFi only: TX Mode: (Throughput mode) 170mA (MCS7/BW40/13dBm) RX Mode: (Throughput mode) 130mA (MCS7/BW40/-60dBm) Associated Idle power saving with DTIM=3 Unassociated Idle: 0.1mA RF disable Mode: 0.1mA 2.1mA BT: FN-LINK TECHNOLOGY LIMITED Inquiry & Page Scan: 0.9 mA ACL no traffic: 7.5mA SCO HV3: 15.0mA Proprietary & Confidential Information 6223E-UUD 6. Pin Assignments 6.1 Pin Outline < TOP VIEW > 6.2 Pin Definition NO Name Type Description GND - Ground connections ANT 0 I/O ANT1 I/O WiFi RF I/O only for dual antenna GND - Ground connections PCM_IN PCM data in PCM_OUT PCM data output PCM_SYNC I/O PCM sync signal PCM_CLK I/O PCM clock BT_WAKE_HOST Bluetooth device wake up host 10 HOST_WAKE_BT Host wake up Bluetooth device 11 VDD33 - Main power voltage source input 3.3V FN-LINK TECHNOLOGY LIMITED BT/WiFi RF I/O for single Antenna , BT RF I/O for dual antenna Proprietary & Confidential Information 6223E-UUD 12 USB_DM I/O USB2.0 differential pair for WLAN And Bluetooth 13 USB_DP I/O USB2.0 differential pair for WLAN And Bluetooth 14 GND - Ground connections 15 3DD_SEL - Not connecting 16 WL_EN WLAN enable 17 BT_EN Bluetooth enable 18 NC Not connecting 19 HOST_WAKE_WL Host wake up WLAN device 20 WL_WAKE_HOST WLAN device wake up host FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 7. Dimensions 7.1 Physical Dimensions (Unit: mm) < TOP VIEW > < Side View > Marking Description < TOP VIEW > FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6223E-UUD 7.2 Module Physical Dimensions (Unit: mm) < TOP VIEW > FN-LINK TECHNOLOGY LIMITED 10 Proprietary & Confidential Information 6223E-UUD 7.3 Layout Recommendation (Unit: mm) < TOP VIEW > FN-LINK TECHNOLOGY LIMITED 11 Proprietary & Confidential Information 6223E-UUD 8. Reference Design 9. Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : 2 times FN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information 6223E-UUD 10. Package Information the take-up package Using self-adhesive tape Size of black tape:24mm*32.6m the cover tape :2.13mmm*32.6m Color of plastic disc: blue A roll of 2000pcs NY bag size:460mm*385mm FN-LINK TECHNOLOGY LIMITED size :350*350*35mm 13 Proprietary & Confidential Information 6223E-UUD The packing case size: 350*210*370mm FN-LINK TECHNOLOGY LIMITED 14 Proprietary & Confidential Information FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following "Contains TX FCC ID: 2AATL-6223E-UUD". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to missing shielding the module is strictly limited to integration by the Grantee himself or his dedicated OEM integrator under control of the Grantee. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information IMPORTANT NOTE: This device is intended only for OEM integrators under the following conditions: (1) According to FCC Part 15 Subpart C Section 15.212, the radio elements of the modular transmitter must have their own shielding. However, due to there is no shielding for this WIFI/BT module, this module is granted as a Limited Modular Approval. This module has been designed to operate with a PIFA antenna having a maximum gain of 2.99dBi. Only this type of antenna may be used, the manufacturer recommended antenna as below: No. Brand Model name Antenna Type Connector Gain (dBi) ZHONGTIAN XUN 2.00001213 PIFA I-PEX 2.99 XK XKFPC-2D4-5D8-1 50 PIFA I-PEX 0.0 XK XK-QX2400-PCB-1 40 PIFA I-PEX 2.0 ZHONGTIAN XUN 2.00001050 PIFA I-PEX 0.38 (2) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter. then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. The module has no shielding and tested stand alone. This module is tested and approved as Limited modular approval with stand alone configuration, any OEM incorporated this radio module into any system are require additional testing and evaluation. The module must in the end-product be installed in such manner that the authorized antennas can be used, any change of the antenna will void the certification. EU Regulatory Conformance Hereby, we(FN-LINK TECHNOLOGY LIMITED) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : cytsai Comments : Company : Create Date : 2017:06:14 14:40:30+06:30 Modify Date : 2017:12:06 19:54:44+08:00 Source Modified : D:20170614144030+06'40' Subject : Trapped : false Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : cytsai Description : Title : WMDM-110G Creator Tool : WPS Office Metadata Date : 2017:12:06 19:54:44+08:00 Keywords : Producer : Document ID : uuid:fccde5cf-8aec-434f-b8f5-314e770d7699 Instance ID : uuid:21e1a278-7160-4ee0-825f-b38455aeb39c Page Count : 19EXIF Metadata provided by EXIF.tools