HUNAN FN LINK TECHNOLOGY F88ETUM35-C2 WiFi Module User Manual

FN-LINK TECHNOLOGY LIMITED WiFi Module Users Manual

15_F88ETUM35-C2 UserMan,r4

FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 1/11Product SpecificationIEEE 802.11b/g/n 1T1R USB WiFi ModuleProject Name RTL8188ETV 1T1R USB WIFI ModuleModel NO F88ETUM35-C2CustomerCustomer’s Part NOApproved: SYMEN SONG Check: Jim Hu Drafted: SJ LIFeedback of customer’s ConfirmationWe accept the specification after Confirmed.Customer name Customer signature Confirmation DateFN-LINK TECHNOLOGY LIMITED5th Floor, A Building, Haoye Logistics Park,Shugang Channel, Bao'an District,Shenzhen City, CHINATEL: 86-0755-29558186FAX: 86-0755-29558196Website: www.fn-link.com
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 2/11CONTENTS0 REVESION HISTORY.......................................................................................................................................30.1 MODEL NO DEFINITION........................................................................................................................... 31 INTRODUCTIONS.............................................................................................................................................41.1 OVERVEIW...................................................................................................................................................41.2 SPECIFICATION REFERENCE................................................................................................................42 GENERAL SPECIFICATION............................................................................................................................52.1 WIFI SPECIFICATION................................................................................................................................ 52.2 POWER CONSUMPTION..........................................................................................................................63 MECHANICAL SPECIFICATION.................................................................................................................... 63.1 OUTLINE DRAWING...................................................................................................................................63.2 PIN DEFINITION..........................................................................................................................................73.3 LAYOUT REFERENCE............................................................................................................................... 74 PACKAGE INFORMATION.............................................................................................................................. 84.1 PACKAGE INFORMATION........................................................................................................................ 85 USER’S MANUAL..............................................................................................................................................95.1 OPERATING & STORAGE CONDITIONS.............................................................................................. 95.2 RECOMMENDED REFLOW PROFILE....................................................................................................95.3 NOTICE..........................................................................................................................................................90. Revision History
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 3/11REV NO Date Modifications Draft ApprovedRev1.0 Jul.10,2014 First Released SJ LI SYMENRev1.1 Aug.15,2014 Updated the PIN definition SJ LI SYMENRev1.2 Aug.20,20141. Added Package information;2. Added Label information;3. Added the shielding case.SJ LI SYMENRev1.3 Oct.30 2014 Added Label information; SJ LI SYMEN0.1. Model No DefinitionExample: F88ETUM35-C21. IntroductionF 88E T U M 3 5-C 2IC Part NO: RTL8188ETVIC Version: TInterface: S SDIO, U USB, E PCI-EProduct Type: M Module, D DongleVoltage: 3 3.3Vdc, 5 5VdcANT: W External, B Print, C Metal ANTProduct NO: 1, 2, 3….Control NO: 0, 1, 2….Manufacturer: FN-LINK
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 4/11F88ETUM35-C2 is a highly integrated and excellent performance Wireless LAN (WLAN) USB2.0network interface device. High-speed wireless connection up to 150 Mbps.1.1 OverviewThe general hardware for the module is shown in Figure 1. This WLAN Module design is based onRealtek RTL8188ETV. It is a USB2.0 network interface controller complying with the 802.11nspecification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip.It is designed to provide excellent performance with low power Consumption and enhancethe advantages of robust system and cost-effective.1.2 SPECIFICATION REFERENCEThis specification is based on additional references listed as below.iEEE 802.11biEEE 802.11giEEE 802.11n2. GENERAL SPECIFICATION&RTL8188ETV
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 5/112.1 WiFi SpecificationsFeatures DescriptionsMain Chipset RTL8188ETVFrequency Range 2.400～2.4835GHzOperating Voltage 5.0Vdc ±5% I/O supply voltageHost Interface WiFi: USBStandards WiFi:IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,Modulation WiFi:802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps),802.11 g/n: OFDMPHY Data rates WiFi:802.11b: 11,5.5,2,1 Mbps802.11g: 54,48,36,24,18,12,9,6 Mbps802.11n: up to 150MbpsTransmit OutputPowerWiFi:802.11b@11Mbps 16±2dBm802.11g@6Mbps 14±2dBm802.11g@54Mbps 14±2dBm802.11n@65Mbps 13±2dBm (MCS 0_HT20)13±2dBm (MCS 7_HT20)13±2dBm (MCS 0_HT40)13±2dBm (MCS 7_HT40)EVM 802.11b /11Mbps : EVM≦-9dB802.11g /54Mbps : EVM≦-25dB802.11n /65Mbps : EVM≦-28dBReceiver Sensitivity(HT 20)802.11b@8% PER1Mbps -88±1dBm2Mbps -87±1dBm5.5Mbps -85±1dBm11Mbps -82±1dBm802.11g@10% PER6Mbps -86±1dBm9Mbps -85±1dBm12Mbps -84±1dBm18Mbps -82±1dBm24Mbps -80±1dBm36Mbps -77±1dBm48Mbps -73±1dBm54Mbps -71±1dBm802.11n@10% PERMCS 0 -83±1dBmMCS 1 -82±1dBmMCS 2 -80±1dBmMCS 3 -78±1dBmMCS 4 -75±1dBmMCS 5 -71±1dBmMCS 6 -69±1dBmMCS 7 -67±1dBmOperating Channel WiFi 2.4GHz:11: (Ch. 1-11) – United States(North America)13: (Ch. 1-13) – Europe14: (Ch. 1-14) – JapanMedia Access Control WiFi: CSMA/CA with ACKNetwork Architecture WiFi: Ad-hoc mode (Peer-to-Peer )
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 6/11Infrastructure modeSoftware APWiFi DirectSecurity WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit,Antenna Onboard Metal ANTOS Supported Android /Linux/ Win CE /iOS /XP/WIN7Dimension Typical L40.0*W33.0*T3.5mm2.2 Power ConsumptionSTATUS Power Consumption (mA)LINK 140TX (11n,20M MCS7) 210TX (11n,40M MCS7) 180TX (11g,54M) 220TX (11b,CCK11) 310RX 1453. Mechanical Specification3.1 Outline Drawing (unit: mm)3.2 Connector Pin Definition
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 7/11Pin # Name Description1 GND Ground2 D+ USB Data DP3 D- USB Data DN4 VDD Supply power input (5V)5 ON/OFF Control “Enable” of DC-DC, High level defaulted.3.3 Layout reference
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 8/114. Package4.1 Package informationLayer size: L300.0*W240.0 mmLayer material: PVCCarton size: L310.0*W260.0*H220.0 mmCarton material: A=A
FN-LINK TECHNOLOGY LIMITEDhttp://www.fn-link.com Page 9/115.User’s Manual5.1 Operating& Storage ConditionsOperating Temperature: -5°C to +55°CRelative Humidity: 10-90% (non-condensing)Storage Temperature: -40°C to +80°C (non-operating)Relative Humidity: 5-90% (non-condensing)MTBF (Mean Time Between Failures) Over 150,000hours5.2 Recommended Reflow ProfileReferred to IPC/JEDEC standard.Peak Temperature : <250°CNumber of Times : ≤2 times5.3 Patch WIFI modules installed before the notice:WIFI module installed note:1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open astencil2. Take and use the WIFI module, please insure the electrostatic protective measures.3. Reflow soldering temperature should be according to the customer the main size of the products, suchas the temperature set at 250 + 5 ℃for the MID motherboard.About the module packaging, storage and use of matters needing attention are as follows:1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storageenvironment conditions: temperature in: < 40 ℃, relative humidity: < 90%RH.2. The module vacuum packing once opened, time limit of the assembly:Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink),or greater than 40% (red) the module have been moisture absorption.2.) factory environmental temperature humidity control: ≦-30 ℃,≦60% RH3). Once opened, the workshop the preservation of life for 168 hours.3. Once opened, such as when not used up within 168 hours:1). The module must be again to remove the module moisture absorption.2). The baking temperature: 125 ℃, 8 hours.3.) After baking, put the right amount of desiccant to seal packages.THE END
FN-LINK TECHNOLOGY LIMITED http://www.fn-link.com Page10/11FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following "Contains FCC ID: 2AATL-F88ETUM35-C2". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FN-LINK TECHNOLOGY LIMITED http://www.fn-link.com Page11/11 IMPORTANT NOTE: This device is intended only for OEM integrators under the following conditions: (1) This module has been designed to operate with Onboard Metal antenna having a gain of 0dBi. The module is only certified with the installed antenna. Any change of the antenna will void the certification. (2) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. EU Regulatory Conformance Hereby, we (FN-Link Technology Limited) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The module Integrator will be responsible to satisfy SAR/RF exposure requirements, when the module integrated into any (portable, mobile, fixed) host device.

Navigation menu