HUNAN FN LINK TECHNOLOGY F88EUUD15 USB WIFI Dongle User Manual FN LINK TECHNOLOGY LIMITED
FN-LINK TECHNOLOGY LIMITED USB WIFI Dongle FN LINK TECHNOLOGY LIMITED
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2221460 |
| Application ID | 8/CU8hpNXBZNAdu4DMwsHQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 61.16kB (764441 bits) |
| Date Submitted | 2014-03-20 00:00:00 |
| Date Available | 2014-03-21 00:00:00 |
| Creation Date | 2014-03-18 09:37:52 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2014-03-18 16:56:02 |
| Document Title | FN-LINK TECHNOLOGY LIMITED |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | duncan |
FN-LINK TECHNOLOGY LIMITED F88EUUD15-B3 series user 's manual http://www.fn-link.com Page 1 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED Index How to install the driver Put the product plug into the USB port of PC……………………..3 Copy the driver into the PC……………..………….…...................3 Install the driver……….……………………………..…...................4 Install driver successfully………...…...........................................4 connect to external wireless network………………......................6 How to set the device to “access point mode” Set to “access point mode”……………………...…...….................9 Setting internet connection share………......……..….................11 Connect to the access and surf the Internet…………................12 http://www.fn-link.com Page 2 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED 1. Put the product plug into the USB port, the "device manager" of PC is shown below: 2. Copy the corresponding driver "RTLWlanU_WindowsDriver_1019.0.0518.2012_ UI_1.00.0191_EU" into the PC, and install driver, the installation methods: open the file "RTLWlanU_WindowsDriver_1019.0.0518.2012_UI_1.00.0191_EU", double click "Setup" installation program, guide to install. http://www.fn-link.com Page 3 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED 3. After install driver successfully. the "device manager" of PC is shown below: http://www.fn-link.com Page 4 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED The USB icon and wireless network adapter displaying in the lower right of the screen. Shown as below: http://www.fn-link.com Page 5 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED 4. The default settings is "station mode", we can connect to external wireless network. (i.e. it is regarded as a wireless adapter) http://www.fn-link.com Page 6 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED 5. Set the device to “access point mode” (1). Click the device icon “ ” on the lower right of the screen. It will display “REALTEK 11n USB Wireless LAN Utility” configuration interface. (2). Click on the "mode" button, then select "access points", the screen appears "Switching from station to AP mode…", then enter the "access point mode", and the lower right of the screen will show "access points" icon. http://www.fn-link.com Page 7 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED http://www.fn-link.com Page 8 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED At the same time also shows the name of the access point in the "REALTEK 11n USB Wireless LAN Utility" configuration interface, the default no secret key, as shown below: http://www.fn-link.com Page 9 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED (3).Right now. Switch mode successfully, then select "Setting Internet Connection Sharing(ICS)", as shown below: http://www.fn-link.com Page 10 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED (4). After select " Setting Internet Connection Sharing(ICS)", as shown below: http://www.fn-link.com Page 11 /12 3/18/2014 FN-LINK TECHNOLOGY LIMITED (5).It can be connected to the access by mobile phone or other mobile device to surf the Internet. http://www.fn-link.com Page 12 /12 3/18/2014 FCC ID: 2AATL-F88EUUD15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-702 Create Date : 2014:03:18 09:37:52Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2014:03:18 16:56:02+08:00 Metadata Date : 2014:03:18 16:56:02+08:00 Format : application/pdf Creator : duncan Title : FN-LINK TECHNOLOGY LIMITED Producer : Microsoft® Office Word 2007 Document ID : uuid:ef15d230-9908-4342-8ecb-ff16248e9081 Instance ID : uuid:318b888d-1acd-423c-9051-c603f2afd02a Page Count : 13 Language : zh-CN Author : duncanEXIF Metadata provided by EXIF.tools