HUNAN FN LINK TECHNOLOGY F88FTUM13 Wifi Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3019980
Application ID	504qtRHle+83vucEZ8swAQ==
Document Description	15_F88FTUM13 UserMan, r3.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	162.53kB (2031565 bits)
Date Submitted	2016-06-07 00:00:00
Date Available	2016-06-07 00:00:00
Creation Date	2017-12-07 14:40:08
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-07 14:40:08
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	YlmF

F88FTUM13
CONTENTS
FN-LINK TECHNOLOGY LIMITED
REVESION HISTORY.......................................................................................................................................3
INTRODUCTIONS............................................................................................................................................. 4
1.1
OVERVEIW...................................................................................................................................................4
1.2
PRODUCT FEATURES.............................................................................................................................. 4
GENERAL SPECIFICATION............................................................................................................................4
2.1
WIFI RF SPECIFICATION..........................................................................................................................4
2.2
POWER CONSUMPTION..........................................................................................................................5
MECHANICAL SPECIFICATION.................................................................................................................... 6
3.1
OUTLINE DRAWING...................................................................................................................................6
3.2
PIN DEFINITION..........................................................................................................................................7
3.3 APPLICATION CIRCUIT............................................................................................................................. 8
ENVIRONMENTAL REQUIREMENTS...........................................................................................................8
4.1
OPERATING & STORAGE CONDITIONS.............................................................................................. 8
4.2
RECOMMENDED REFLOW PROFILE....................................................................................................8
4.3
NOTICE..........................................................................................................................................................9
PACKING INFORMATION............................................................................................................................. 10
5.1
BLISTER PACKAGING............................................................................................................................. 10
5.2
COILING PACKAGING............................................................................................................................. 10
http://www.fn-link.com
Page2/12
FN-LINK TECHNOLOGY LIMITED
0. Revision History
REV NO
Date
Rev1.0
2016-02-29
http://www.fn-link.com
Modifications
First Released
Draft
Allen
Hu
Page3/12
1. Introduction
FN-LINK TECHNOLOGY LIMITED
1.1 Overview
F88FTUM13 is a highly integrated and excellent performance Wireless LAN (WLAN) USB2.0
network interface device. High-speed wireless connection up to 150 Mbps.
The general hardware for the module is shown in Figure 1. This WLAN Module design is based on
Realtek RTL8188FTV. It is a highly integrated single-chip 1*1 MIMO (Multiple In Multiple Out) Wireless
LAN (WLAN) USB2.0 network interface controller complying with the 802.11n specification. It combines
a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent
performance with low power Consumption and enhance the advantages of robust system and
cost-effective.
1.2 Product Features
 Operate at ISM frequency bands (2.4GHz)
 USB Interface for WiFi
 IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,
 Enterprise level security which can apply WPA/WPA2 certification for WiFi.
 WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150
Mbps upstream PHY rates
2. GENERAL SPECIFICATION
2.1 WiFi RF Specifications
Features
Descriptions
RTL8188FTV
Main Chipset
Frequency Range
2.400～2.4835GHz
Operating Voltage
3.3Vdc ±10% I/O supply voltage
Host Interface
WiFi: USB
WiFi:
IEEE 802.11b,
Standards
IEEE 802.11g,
IEEE 802.11n,
WiFi:
802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps);
Modulation
802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps),
16QAM(36,24Mbps), 64QAM(54,48Mbps);
802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps)
WiFi:
802.11b: 11,5.5,2,1 Mbps
PHY Data rates
802.11g: 54,48,36,24,18,12,9,6 Mbps
802.11n: up to 150Mbps
http://www.fn-link.com
Page4/12
FN-LINK TECHNOLOGY LIMITED
Transmit Output
Power
WiFi:
802.11b <16dBm
802.11g <14dBm
802.11n <13dBm
EVM
802.11b /11Mbps : EVM≦-9dB
802.11g /54Mbps : EVM≦-25dB
802.11n /65Mbps : EVM≦-28dB
802.11b@8% PER
11Mbps -86dBm
Receiver Sensitivity
802.11g@10% PER
54Mbps -73dBm
802.11n@10% PER
HT20_MCS 7 -70dBm
HT40_MCS 7 -66dBm
WiFi 2.4GHz:
Operating Channel
11: (Ch. 1-11) – United States(North America)
Media Access Control
WiFi:
Network Architecture
WiFi: Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
Software AP
WiFi Direct
Security
WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP, AES, TKIP
Antenna
Integral (1dBi Max)
OS Supported
Android /Linux/ Win CE /iOS /XP/WIN7
Dimension
Typical
CSMA/CA with ACK
L12.90*W12.20*H1.6mm
2.2 Power Consumption
Power Consumption
(Typical
by
using
SWR)
http://www.fn-link.com
WiFi only:
TX Mode: (Continuous mode) 185mA
RX Mode: (Continuous mode) 145mA
LINK:140mA
DISABLE:40mA
Page5/12
FN-LINK TECHNOLOGY LIMITED
3. Mechanical Specification
3.1 Outline Drawing (Unit: ±0.15mm)
(TOP)
http://www.fn-link.com
PIN1
(BOTTOM)
Page6/12
FN-LINK TECHNOLOGY LIMITED
3.2 PIN Assignment
Pin #
Name
Description
VDD33
3.3V DC power supply input
HSDM
USB DATA-
HSDP
USB DATA+
GND
Ground
CHIP_EN
This Pin Can Externally Shutdown RTL8188FTV
Host_Wake_Dev
Host Wake Device Input Pin
Dev_Wake_Host
Device Wake Host Output Pin
GND
RF GROUND
ANT
External Antenna (2.4GHz 50Ohm )
http://www.fn-link.com
Page7/12
FN-LINK TECHNOLOGY LIMITED
3.3 Application Circuit
4. Environmental Requirements
4.1 Operating& Storage Conditions
Operating
Storage
MTBF (Mean Time Between Failures)
Temperature: 0°C to +70°C
Relative Humidity: 10-90% (non-condensing)
Temperature: -40°C to +80°C (non-operating)
Relative Humidity: 5-90% (non-condensing)
Over 150,000hours
4.2 Recommended Reflow Profile
Referred to IPC/JEDEC standard.
Peak Temperature : <250°C
Number of Times : ≤2 times
http://www.fn-link.com
Page8/12
FN-LINK TECHNOLOGY LIMITED
4.3 Patch WIFI modules installed before the notice:
WIFI module installed note:
1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a
stencil
2. Take and use the WIFI module, please insure the electrostatic protective measures.
3. Reflow soldering temperature should be according to the customer the main size of the products, such
as the temperature set at 250 + 5 ℃ for the MID motherboard.
About the module packaging, storage and use of matters needing attention are as follows:
1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storage
environment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h.
2. The module vacuum packing once opened, time limit of the assembly:
Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink),
or greater than 40% (red) the module have been moisture absorption.
2.) factory environmental temperature humidity control: ≦ 30% ℃, ≦ 60% r.h..
3). Once opened, the workshop the preservation of life for 168 hours.
3. Once opened, such as when not used up within 168 hours:
1). The module must be again to remove the module moisture absorption.
2). The baking temperature: 125 ℃, 8 hours.
3.) After baking, put the right amount of desiccant to seal packages.
http://www.fn-link.com
Page9/12
5. PACKING INFORMATION
FN-LINK TECHNOLOGY LIMITED
5.1 Blister packaging
A piece of 100 PCS
5.2 Coiling Packaging
A roll of
2000pcs
http://www.fn-link.com
Page10/12
FN-LINK TECHNOLOGY LIMITED
The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated
into any (portable, mobile, fixed) host device.
2AATL-F88FTUM13
http://www.fn-link.com
Page11/12
FN-LINK TECHNOLOGY LIMITED
This devic has been evaluated and shown compliant with the FCC RF Exposure limits under fixed
exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain
specific OEM configurations.
FCC Radiation Exposure Statement:
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Due to missing shielding the module is strictly limited to integration by the Grantee himself or his dedicated
OEM integrator under control of the Grantee.However, the OEM integrator is still responsible for testing
their end-product for any additional compliance requirements required with this module installed.
Note 1: The wifi module has no shielding and tested stand alone.
This module is tested and approved as Limited modular approval with stand alone configuration, any OEM
incorporated this radio module into any system are require additional testing and evaluation.
Note 2: The module is only certified with the installed antenna. Any change of the antenna
will void the certification. The host device including this RF module need to undergo separate
cetification.
http://www.fn-link.com
Page12/12
Attention: Limited Modular Approval ‐ this RF Module may not be sold to the generic public
and requires professional installation.
Due to the fact that this RF Module is not equipped with an own shielding, the end‐product
incl. this RF Module has to show compliance to the FCC rules (15C / radiated emissions).
(OEM) Integrator has to assure compliance of the entire end‐product
incl. the integrated RF Module. Additional measurements (15C) and/or equipment authorizations
(e.g either a complete new certification or a Class II Permissive Change. )
may need to be addressed depending on co‐location or simultaenous
transmission issues if applicable.
Integrator is reminded to assure that these installation instructions
will not be made available to the end‐user of the final host device.
the Integrator will be responsible to satisfy SAR/ RF Exposure requirements,
when the module integrated into any (portable, mobile, fixed) host device.
The final host device, into which this RF Module is integrated" has to be labelled
with an auxilliary lable stating the FCC ID of the RF Module, such as
"Contains FCC ID: 2AATL-F88FTUM13
Depending on the size of the final end‐product, the §15.19 FCC statement
"This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation."
should be placed also on the device or alternatively within a prominent location of the users
manual
The §15.21 "Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment." statement has to be included in a prominent
location of the users manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : YlmF
Create Date                     : 2016:03:22 17:12:13Z
Modify Date                     : 2016:06:07 16:58:42+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : YlmF
Title                           : 产品特点：
Creator Tool                    : WPS Office
Metadata Date                   : 2016:06:07 16:58:42+08:00
Document ID                     : uuid:37aadd6a-a291-4977-b914-5a9a863c5c82
Instance ID                     : uuid:6698d8e0-a0b2-4496-9037-d1764f466d8c
Page Count                      : 13

EXIF Metadata provided by EXIF.tools