HUNAN FN LINK TECHNOLOGY F89FTSM13-W3 WIFI Module User Manual
FN-LINK TECHNOLOGY LIMITED WIFI Module Users Manual
15_F89FTSM13-W3 UserMan r1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3670499 |
| Application ID | aiiKFMfBxUoRKs1YYqHUPA== |
| Document Description | 15_F89FTSM13-W3 UserMan r1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 89.59kB (1119911 bits) |
| Date Submitted | 2017-12-11 00:00:00 |
| Date Available | 2017-12-11 00:00:00 |
| Creation Date | 2016-03-14 10:33:32 |
| Document Lastmod | 2017-12-11 14:03:09 |
| Document Title | Users Manual |
| Document Creator | WPS Office |
| Document Author: | YlmF |
欧智通科技 Fn-Link F89FTSM13-W3 WiFi Single-band 1X1 802.11 b/g/n User's Manual FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information FN-LINK TECHNOLOGY LIMITED CONTENTS REVESION HISTORY............................................................................................................................................... 3 1.1 MODEL NO DEFINITION....................................................................................................................................... 3 INTRODUCTIONS......................................................................................................................................................4 1.1 OVERVEIW..........................................................................................................................................................4 1.2 PRODUCT FEATURES..................................................................................................................................... 4 GENERAL SPECIFICATION.................................................................................................................................... 5 2.1 WIFI RF SPECIFICATION................................................................................................................................ 5 2.2 POWER CONSUMPTION.................................................................................................................................5 MECHANICAL SPECIFICATION............................................................................................................................. 6 3.1 OUTLINE DRAWING......................................................................................................................................... 6 3.2 PCB LAYOUT......................................................................................................................................................6 3.3 PIN DEFINITION.................................................................................................................................................7 3.4 APPLICATION CIRCUIT.................................................................................................................................... 8 ENVIRONMENTAL REQUIREMENTS................................................................................................................... 9 4.1 OPERATING & STORAGE TEMPRETURE...................................................................................................9 4.2 RECOMMENDED REFLOW PROFILE.......................................................................................................... 9 4.3 NOTICE................................................................................................................................................................ 9 PACKING INFORMATION...................................................................................................................................... 10 http://www.fn-link.com Page2/12 FN-LINK TECHNOLOGY LIMITED 0. Revision History REV NO Date Rev.1.0 2015-7-9 http://www.fn-link.com Modifications First Released Draft Allen Hu Page3/12 FN-LINK TECHNOLOGY LIMITED 1. Introduction 1.1 Overview F89FTSM13-W3 is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. High-speed wireless connection up to 150 Mbps. The general hardware for the module is shown in Figure 1. This WLAN Module design is based on Realtek RTL8189FTV. It is a highly integrated single-chip 1*1 SISO (Multiple In Multiple Out) Wireless LAN (WLAN) SDIO network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective. 1.2 Product Features Operate at ISM frequency bands (2.4GHz) SDIO Interface for WiFi IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, Enterprise level security which can apply WPA/WPA2 certification for WiFi. WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates http://www.fn-link.com Page4/12 FN-LINK TECHNOLOGY LIMITED 2. GENERAL SPECIFICATION 2.1 WiFi RF Specifications Main Chipset RTL8189FTV Operating Frequency 2.400～2.4835GHz Standards WiFi: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, Modulation WiFi: 802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps), 802.11 g/n: OFDM PHY Data rates WiFi: 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps Receiver Sensitivity 802.11b@11Mbps -82±1dBm 802.11g@54Mbps -71±1dBm 802.11n -67±1dBm (MCS 7_HT20) -64±1dBm (MCS 7_HT40) Operating Channel WiFi 2.4GHz: 11: (Ch. 1-11) – United States Media Access Control WiFi: Antenna External Antenna (PIFA) Network Architecture WiFi: Ad-hoc mode (Peer-to-Peer ) Infrastructure mode Software AP WiFi Direct Security WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, OS Supported Host Interface Operating Voltage Dimension Android /Linux WiFi: SDIO/GPIO 3.3Vdc ±10% I/O supply voltage Typical L12.0*W12. 0*H1.6mm CSMA/CA with ACK 2.2 Power Consumption Mode OS Windows XP http://www.fn-link.com Status Power(mA) Link 130 RX 130 20M 190 20M(MCS7) 175 40M(MCS7) TX Note Page5/12 FN-LINK TECHNOLOGY LIMITED 3. Mechanical Specification 3.1 Outline Drawing 3.2 PCB LAYOUT (Unit: ±0.15mm) http://www.fn-link.com Page6/12 FN-LINK TECHNOLOGY LIMITED 3.3 PIN Assignment Pin # Name Description GND GND RF RF OUTPUT GND GND 4~8 NC NC VBAT 3.3V Optional 10 NC NC 11 NC NC 12 WL_REG_ON WL_REG_ON 13 WL_HOST_WAKE WAKE UP 14 SDIO_DATA_2 SDIO_D2 15 SDIO_DATA_3 SDIO_D3 16 SDIO_DATA_CMD SDIO_CMD 17 SDIO_DATA_CLK SDIO_CLK 18 SDIO_DATA_D0 SDIO_D0 19 SDIO_DATA_D1 SDIO_D1 20 GND GND 21 NC NC 22 VDIO 1.8~3.3V 23 NC NC 24 LPO CLK_REQ 25~29 NC NC 30 TCXO_IN 26MHz_IN 31 GND GND http://www.fn-link.com Page7/12 FN-LINK TECHNOLOGY LIMITED 32 NC NC 33 GND GND 34~35 NC NC 36 GND GND 37~40 NC NC 41 GND GND 42~44 NC NC 3.4 Application Circuit http://www.fn-link.com Page8/12 FN-LINK TECHNOLOGY LIMITED 4. Environmental Requirements 4.1 Operating & storage tempreture Operating Storage MTBF (Mean Time Between Failures) Temperature: -20°C to +70°C Relative Humidity: 10-90% (non-condensing) Temperature: -40°C to +80°C (non-operating) Relative Humidity: 5-90% (non-condensing) Over 150,000hours 4.2 Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : ≤2 times 4.3 Patch WIFI modules installed before the notice: WIFI module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ℃ for the MID motherboard. About the module packaging, storage and use of matters needing attention are as follows: 1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storage environment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h. 2. The module vacuum packing once opened, time limit of the assembly: Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption. 2.) factory environmental temperature humidity control: ≦ -30℃, ≦ 60% r.h.. 3). Once opened, the workshop the preservation of life for 168 hours. Page9/12 http://www.fn-link.com FN-LINK TECHNOLOGY LIMITED 3. Once opened, such as when not used up within 168 hours: 1). The module must be again to remove the module moisture absorption. 2). The baking temperature: 125 ℃, 8 hours. 3.) After baking, put the right amount of desiccant to seal packages. 5. PACKING INFORMATION 5.1 Blister packaging A piece of 100 PCS 5.2 Coiling Packaging A roll of 2000pcs http://www.fn-link.com Page10/12 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following "Contains TX FCC ID: 2AATL-F89FTSM13-W3". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page11/12 IMPORTANT NOTE: This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter. then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module has been designed to operate with a PIFA antenna having a maximum gain of 2.99dBi. Only this type of antenna may be used, the manufacturer recommended antenna as below: No. Brand Model name Antenna Type Connector Gain (dBi) ZHONGTIAN XUN 2.00001213 PIFA I-PEX 2.99 XK XKFPC-2D4-5D8-1 50 PIFA I-PEX 0.0 XK XK-QX2400-PCB-1 40 PIFA I-PEX 2.0 ZHONGTIAN XUN 2.00001050 PIFA I-PEX 0.38 The module must in the end-product be installed in such manner that the authorized antennas can be used, any change of the antenna will void the certification. EU Regulatory Conformance Hereby, we(FN-LINK TECHNOLOGY LIMITED) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Page12/12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : YlmF Create Date : 2016:03:14 10:33:32Z Modify Date : 2017:12:11 14:03:09+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : YlmF Title : 产品特点： Creator Tool : WPS Office Metadata Date : 2017:12:11 14:03:09+08:00 Document ID : uuid:db55ebca-3adc-4c70-a699-807e2a0aac95 Instance ID : uuid:8b8bb403-4020-4720-b539-4456c6eb6f84 Page Count : 12EXIF Metadata provided by EXIF.tools