HUNG WAI WL0239 300Mbps Wireless N Dual Band USB Adapter User Manual
HUNG WAI PRODUCTS LIMITED 300Mbps Wireless N Dual Band USB Adapter Users Manual
HUNG WAI >
User Manual
Put into the CD
Double-click the CD drive
letter, choose the corresponding
model No., then click “Install”.
Click “Next”.
Wait for a few seconds.
Choose one language and click “Next”
The installation will take a few
seconds.
We recommend you choose
“Yes...”to restart your computer
now.Click “Finish”, the driver
program is installed successfully.
Switch wireless LAN Adapter configuration program
Wireless LAN adapter provides
two wireless LAN adapter
connection configuration programs,
one is TOTOLINK wireless LAN
adapter connection configuration
program, another is Windows
wireless LAN adapter connection
configuration program.
Instruction of Install LAN Adapter Driver
LAN Adapter Physical Connection Diagram LAN Adapter Windows Search Connection WEP Encryption Network Diagram
LAN Adapter Windows Search Connection No Encryption Network Diagram
Right-click “My Network Places”,
and choose “Properties”
Right-click “Wireless Network Connection”,
choose “View available wireless connection”
Confirm the SSID name of wireless network, choose the wireless
network which you would like to connect and click “Connect”
When the wireless network is connected, then you can
access Internet.
Right-click “My Network Places”,
and choose “Properties”
Right-click “Wireless Network Connection”,
choose “View available wireless connection”
Confirm the SSID name of wireless network, choose the wireless
network which you would like to connect and click “Connect”
When the wireless network is connected, then you can access Internet.
Input WEP secret key, click “Connect”
Note
Computer found the wireless LAN
adapter hardware, have to install
the driver.
Website: http://www.totolink.net
Method One: Connect the adapter and your computer with the provided
USB cable.
Method Two: Insert the adapter to the USB port of your computer directly.
Thanks very much for purchasing TOTOLINK Wireless LAN USB Adapter.
Before you connect this adapter to computer, you must prepare a wireless
router or AP to make it work. Different Wireless router or AP may use
different connection mode.
Quick Installation Guide
300Mbps Wireless N Dual Band USB Adapter
Model: WL0239
N500UM
N500UM
TOTOLINK
Choose the wireless network which you would like to
connect and click “Connect”
Input WPAPSK secret key, click “Connet”
Have connected the wireless network.
Windows 7/Vista Connection Network Diagram
LAN Adapter Windows Search Connection WPAPSK Encryption Network Diagram
Right-click “My Network Places”,
and choose “Properties”
Right-click “Wireless Network Connection”,
choose “View available wireless connection”
Right-click “Network”,choose “Properties”.
Click “Connect to a network”.
Win 7/Vista
PC TOTOLINK
TOTOLINK
TOTOLINK
TOTO LINK
TOTOLINK
Connect to No Encrytion Network
Connect to Encrytion Network (WEP / WPAPSK)
Finish
Finish
TOTOLINK LAN Adapter Configuration Tool Search Connection Network Diagram
Click this icon, the wireless configuration
connection window will pop out.
TOTOLINK
TOTOLINK
Type in the encryption key to the marked
area.
Wireless network is
connected.
Choose the wireless network which you
would like to connect, and then click
“Connect”.
Connect Wireless Network
Steps
Wireless network is
connected.
Choose one SSID and enter the
encryption key to connect.
By default, 2.4G+5G is selected.
please click “Advanced” to change it to
2.4G.
How to use 2.4G band to
connect WLAN
Wireless network is
connected.
Choose one SSID and enter the
encryption key to connect.
Back to Advanced page, change the
Wireless mode to 5G.
How to use 5G band to
connect WLAN
Note Before you go on with this step, you must know the SSID
and the key your Router or AP has been set.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna installation
instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.