HYUNDAI MOBIS AC610HGMG DIGITAL CAR AUDIO SYSTEMS User Manual H HG 1012 GEN 0104 qxp
HYUNDAI MOBIS CO., LTD. DIGITAL CAR AUDIO SYSTEMS H HG 1012 GEN 0104 qxp
USER MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1981412 |
| Application ID | MItJIkvE14xyfwQX+5HmhA== |
| Document Description | USER MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 173.72kB (2171456 bits) |
| Date Submitted | 2013-06-03 00:00:00 |
| Date Available | 2013-11-30 00:00:00 |
| Creation Date | 2011-01-06 10:54:08 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2013-06-03 13:09:27 |
| Document Title | H_HG_'1012_GEN(0104).qxp |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
DIGITAL CAR AUDIO SYSTEM User Manual AC610HGMG AC610HGGN AC610HGGE Hyundai MOBIS Co., Ltd. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Knowing your vehicle When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area. FM radio reception ¢ ¢ ¢ JBM001 D300800AHM How vehicle audio works AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. AM radio reception ¢ ¢¢ ¢ ¢¢ JBM002 AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstructions so that they can provide better signal coverage. 4 1 Knowing your vehicle FM radio station ¢ ¢¢ JBM003 JBM004 JBM005 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble: • Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station. • Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears. • Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal. • Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed. 4 2 Knowing your vehicle Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Care of discs • If the temperature inside the vehicle is too high, open the vehicle windows for ventilation before using your vehicle audio. • It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means. • Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs. • To prevent the disc surface from getting damaged. Hold and carry CDs by the edges or the edges of the center hole only. • Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge). • Do not damage the disc surface or attach pieces of sticky tape or paper onto it. • Make sure objects other than CDs are not inserted into the CD player (Do not insert more than one CD at a time). • Keep CDs in their cases after use to protect them from scratches or dirt. • Depending on the type of CD-R/CDRW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your vehicle audio system. ✽ NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your vehicle audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player. 4 3 Knowing your vehicle ■ CD Player : AC110HG/AC100HG ■ CD Changer : AC610HG/AC600HG AC210HG/AC200HG ❋ There will be no 4 4 logo if the Bluetooth® feature is not supported. AC110HG_CDP_BT / AC610HG_CDC_BT Knowing your vehicle previous frequency if no channel is found. SEEK • When the button is pressTRACK ed, it reduces the band frequency to automatically select channel. Stops at the previous frequency if no channel is found. 4. AST Button(AUTO STORE Button) AC110HG_CDP_BT Using RADIO, SETUP, VOLUME and AUDIO CONTROL 1. FM Button Turns to FM mode and toggles FM1and FM2 when the button is pressed each time. 2. AM Button Pressing the AM button selects the AM band. AM Mode is displayed on the LCD. 3. SEEK Button SEEK • When the TRACK button is pressed, it increases the band frequency to automatically select channel. Stops at the When the button is pressed, it automatically selects and saves channels with high reception rate to PRESET buttons 1 ~ 6 and plays the channel saved in PRESET1. If no channel is saved after AST, it will play the previous channel. • When the button is pressed for longer than 0.8 second, it automatically scans the radio preset station upwards. • Press the SCAN button again to stop the scan feature and to listen to the currently selected channel. 6. SETUP Button ■ AC110/100/610/600HG Press this button to turn to the SETUP adjustment mode. If no action is taken for 8 seconds after pressing the button, it will return to the play mode. (After entering SETUP mode, select Manual , TUNE button FILE and push OK button) The setup changes in the order of Scroll ➟ SDVC ➟ Media ➟ Sound ➟ Phone ➟ Clock ➟ Scroll... ■ AC210/200HG 5. VOLUME Knob If the knob is turned clockwise/counterclockwise, the volume will increase /decrease. The setup Change in the order of Scroll ➟ SDVC ➟ Media ➟ V-EQ ➟ Sound ➟ Phone ➟ Clock ➟ ➟ Scroll ... 4 5 Knowing your vehicle • SCROLL This function is used to display characters longer than the LCD text display and can be turned On/Off through the , TUNE button. FILE • SDVC (Speed Dependent Volume Control) This function automatically adjusts the volume level according to the speed of the vehicle and can be turned On/Off through the FILE , TUNE button. • MEDIA Select default display of MP3 play information. “Folder/File” or “Artist/Title” can be selected. 4 6 • V-EQ Press the , TUNE button to FILE select the Variable EQ the following order : Normal, Dynamic, Concert OK Select and press the button to complete and exit from Variable EQ setup mode. AC110HG_CDP_BT MIDDLE Control To increase the MIDDLE, press the right button, while to decrease the MIDDLE, press the left button. TREBLE Control To increase the TREBLE, press the right button, while to decrease the TREBLE, press the left button. • SOUND The Bass, Middle, Treble, Fader, Balance mode. Press the FOLDER , FOLDER button to select mode. After selecting each mode, press FILE , TUNE button. BASS Control To increase the BASS, press the right button, while to decrease the BASS, press the left button. FADER Control Press the right button to emphasize rear speaker sound(front speaker sound will be attenuated). When the left button is pressed, front speaker sound will be emphasized(rear speaker sound will be attenuated). Knowing your vehicle BALANCE Control Press the right button to emphasize right speaker sound(left speaker sound will be attenuated). When the left button is pressed, left speaker sound will be emphasized(right speaker sound will be attenuated). • PHONE (if equipped) Select this item to enter PHONE setup mode. Refer to “BLUETOOTH PHONE OPERATION” section for detailed information. ❈ “PHONE” menu is not available if the audio does not support Bluetooth features. Press the SETUP button for more than 1 seconds while in power off/on, you can enter the Clock setup mode directly. • Return( This function displays the previous MODE screen. AC110HG_CDP_BT 8. PRESET Buttons Push 1 ~ 6 buttons less than 0.8 second to play the channel saved in each button. Push Preset button for 0.8 second or longer to save current channel to the respective button with a beep. 9. • CLOCK Select this item to enter Clock setup mode. Adjust the hour using FOLDER , FOLDER button and press the TUNE button. Adjust the minute using FOLDER , FOLDER button and press the button to OK complete and exit from clock adjustment mode. Button • Turns on/off the set when the IGNITION SWITCH is on ACC or ON. 10. DISP Button Turn ON/OFF the displayed data and light on LCD. When LCD Display is turned OFF, Press any button to turn ON display. 4 7 Knowing your vehicle SEEK • Press TRACK button for less than 0.8 seconds to play the next song. SEEK • Press TRACK button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song. 3. SCAN Button Using CD Player Play each song in the CD for 10 seconds. To cancel SCAN Play, press this button again. 1. MEDIA Button (CD) 4. If the CD is loaded, turns to CD mode. If no CD, it displays “No Media” for 3 seconds and returns to the previous mode. Press the select song. AC110HG_CDP_BT OK 5. INFO 2. TRACK Button SEEK • Press button for less than TRACK 0.8 seconds to play from the beginning of current song. SEEK • Press button for less than TRACK 0.8 seconds and press again within 1 second to play the previous song. SEEK • Press TRACK button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song. 4 8 Button OK button to play the Button Displays the information of the current CD TRACK(FILE) as below when the button is pressed each time. • CDDA : Disc Title, Disc Artist, Track Title, Track Artist, Total Track. • MP3/WMA : File Name, Title, Artist, Album, Folder, Total File. (not displayed if the information is not available on the DISC.) AC610HG_CDC_BT AC110HG_CDP_BT 6. 1 RPT Button (REPEAT) Press this button for less than 0.8 second to activate ‘RPT’ mode and more than 0.8 seconds to activate ‘FLD.RPT’ mode. • RPT : Only a track(file) is repeatedly played back. • FLD.RPT (MP3/WMA Only) : Only files in a folder are repeatedly played back. ❈ DISC RPT(CD Changer) : Repeats the entire DISC when this button is pressed for 0.8 seconds or longer. 7. 2 RDM Button (RANDOM) Press this button for less than 0.8 second to activate ‘RDM’ mode and longer than 0.8 second to activate ‘ALL RDM’ mode. • FLD.RDM : Only files/tracks in a folder/disc are played back in random sequence. • ALL RDM(MP3/WMA Only) : All files in a disc are played back in random sequence. 8. DISC Button (CD changer : AC610/600HG) • Preset 5 DISC Change Button Changes Knowing your vehicle disc to the previous disc. • Preset 6 DISC Change Button Changes disc to the next disc. AC610HG_CDC_BT 9. 11. LOAD Button (CD changer : AC610/600HG) Push LOAD button to load CDs to available CDC deck (from 1~6). Push LOAD button for more than 2 seconds to load into all available decks. The last CD will play. 10 seconds idle status will disable loading process. Button (CD Eject) Push button for less than 0.8 seconds to eject the CD during CD playback. This button is enabled when ignition switch is off. • ALL EJECT(CD Changer : AC610/600HG) Press this button for more than 0.8 seconds to eject all discs inside the deck in respective order. 10. CD Slot Please face printed side upward and gently push in. When the ignition switch is on ACC or ON and power is off, power is automatically turned on if the CD is loaded. This CDP supports only 12cm CD. If VCD, Data CD are loaded, "Reading Error" message will appear and CD will be ejected. Press OK button to move to the folder displayed. 13. Search Button Press the TUNE button to display the songs next to the currently played song. press the button to display the FILE songs before to the currently played song. AC110HG_CDP_BT 12. FOLDER Button • Press FOLDER button to move to child folder of the current folder and display the first song in the folder. Press OK button to move to the folder displayed. It will play the first song in the folder. • Press FOLDER button to move to parent folder of the current folder and display the first song in the folder. 4 9 Knowing your vehicle CAUTION IN USING USB DEVICE • To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. • If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) • If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. • It may not play inauthentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps~320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps~320Kbps. • Take precautions for static electricity when connecting or disconnecting the external USB device. (Continued) 4 10 (Continued) • An encrypted MP3 PLAYER is not recognizable. • Depending on the condition of the external USB device, the connected external USB device can be unrecognizable. • When the formatted byte/sector setting of External USB device is not either 512BYTE or 2048BYTE, then the device will not be recognized. • Use only a USB device formatted to FAT 12/16/32. • USB devices without USB I/F authentication may not be recognizable. • Make sure the USB connection terminal does not come in contact with the human body or other objects. • If you repeatedly connect or disconnect the USB device in a short period of time, it may break the device. • You may hear a strange noise when connecting or disconnecting a USB device. (Continued) (Continued) • If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, disconnect the external USB device when the audio is turned off or in another mode. (e.g, Radio or CD) • Depending on the type and capacity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. • Do not use the USB device for purposes other than playing music files. • Playing videos through the USB is not supported. • Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble. • If you use devices such as a USB hub purchased separately, the vehicle’s audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia terminal of the vehicle. (Continued) Knowing your vehicle (Continued) • If the USB device is divided by logical drives, only the music files on the highest-priority drive are recognized by car audio. • Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. • Charging through the USB may not be supported in some mobile devices. ❋ A car exclusive cable (sold separately) is required to use the iPod. • Some non-standard USB devices (METAL COVER TYPE USB) can be unrecognizable. • Some USB flash memory readers (such as CF, SD, microSD, etc.) or external-HDD type devices can be unrecognizable. • Music files protected by DRM (DIGITAL RIGHTS MANAGEMENT) are not recognizable. • The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. (Continued) (Continued) • A SD-to-USB adapter may not work with the car audio system. • Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products as shown below. 4 11 Knowing your vehicle AC110HG_CDP_BT SEEK • Press TRACK button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song. SEEK • Press TRACK button for less than 0.8 seconds to play the next song. SEEK • Press TRACK button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song. Using USB device 3. SCAN Button 1. MEDIA Button (USB) If USB is connected, it switches to the USB mode from the other mode to play the song files stored in the USB. If no CD and auxiliary device is not connected, it displays "No Media" for 3 seconds and returns to the previous mode. Play each song in the CD for 10 seconds. To cancel SCAN Play, press this button again. 4. OK Press the select song. Button OK button to play the 2. TRACK Button 5. INFO SEEK • Press button for less than TRACK 0.8 seconds to play from the beginning of current song. SEEK • Press button for less than TRACK 0.8 seconds and press again within 1 second to play the previous song. Displays the information of the file currently played in the order of File Name, Title, Artist, Album, Folder, Total File, Normal Display. (Displays no information if the file has no song information.) 4 12 Button AC110HG_CDP_BT 6. 1 RPT Button (REPEAT) Press this button for less than 0.8 second to activate 'RPT' mode and longer than 0.8 second to activate 'FLD.RPT' mode. • RPT : Only the current file is repeatedly played back. • FLD.RPT : All files in a folder are repeatedly played back. 7. 2 RDM Button (RANDOM) Press this button for less than 0.8 seconds to activate ‘RDM’ mode and more than 0.8 seconds to activate ‘ALL RDM’ mode. • FLD.RDM : Only files in a folder are played back in a random sequence. • ALL RDM : All files in a USB memory are played back in the random sequence. Knowing your vehicle AC110HG_CDP_BT 8. FOLDER Button • Press FOLDER button to move to child folder of the current folder and display the first song in the folder. OK Press button to move to the folder displayed. It will play the first song in the folder. • Press FOLDER button to move to parent folder display the first song in the folder. OK Press button to move to the folder displayed. 9. Search Button Press the TUNE button to display the songs next to the currently played song. press the button to display the FILE songs before to the currently played song. 4 13 Knowing your vehicle ✽ NOTICE FOR USING THE iPod DEVICE • Some iPod models might not support the communication protocol and the files will not be played. Supported iPod models: - iPod Mini - iPod 4th(Photo) ~ 6th(Classic) generation - iPod Nano 1st~4th generation - iPod Touch 1st~2nd generation • The order of search or playback of songs in the iPod can be different from the order searched in the audio system. • If the iPod disabled due to its own malfunction, reset the iPod. (Reset: Refer to iPod manual) • An iPod may not operate normally on low battery. • Some iPod devices, such as the iPhone, can be connected through the Bluetooth® interface. The device must have audio Bluetooth® capability (such as for stereo headphone Bluetooth®). The device can play, but it will not be controlled by the audio system. 4 14 CAUTION IN USING THE iPod DEVICE • The Hyundai iPod Power Cable is needed in order to operate iPod with the audio buttons on the audio system. The USB cable provided by Apple may cause malfunction and should not be used for Hyundai vehicles. ❋ The Hyundai iPod Power Cable may be purchased through your Hyundai Dealership. • When connecting iPod with the iPod Power Cable, insert the connector to the multimedia socket completely. If not inserted completely, communications between iPod and audio may be interrupted. • When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the quality of the sound. • Deactivate (turn off) the equalizer function of an iPod when adjusting the audio system’s volume, and turn off the equalizer of the audio system when using the equalizer of an iPod. (Continued) (Continued) • When the iPod cable is connected, the system can be switched to AUX mode even without iPod device and may cause noise. Disconnect the iPod cable when you are not using the iPod device. • When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. Detachable USB/AUX All-in-one USB/AUX • When connecting the iPod, use the USB/AUX terminals. • When disconnecting the iPod, disconnect both the USB/AUX terminal. • The iPod exclusive cable must be connected to both the USB/AUX terminals for iPod charging and operations to be supported. Knowing your vehicle AC110HG_CDP_BT SEEK • Press TRACK button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song. SEEK • Press TRACK button for less than 0.8 seconds to play the next song. SEEK • Press TRACK button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song. 6. 2 RDM Button (RANDOM) • Press this button for less than 0.8 seconds to shuffle order of all songs in current category. (Song Random) • Press this button for 0.8 seconds or longer to shuffle order of albums in current category. (Album Random) • To cancel RANDOM Play, press this button again. Using iPod ❋ iPod is a trademark of Apple Inc. 1. MEDIA Button (iPod) If iPod is connected, it switches to the iPod mode from the previous mode to play the song files stored in the iPod. If there is no iPod connected, then it displays the message "No Media" for 3 seconds and returns to the previous mode. 3. INFO Button (iPod) Displays the information of the file currently played in the order of Title, Artist, Album, Normal Display. (Displays no information if the file has no song information.) 4. OK Press the select song. AC110HG_CDP_BT Button OK button to play the 2. TRACK Button SEEK • Press button for less than TRACK 0.8 seconds to play from the beginning of current song. SEEK • Press button for less than TRACK 0.8 seconds and press again within 1 second to play the previous song. AC110HG_CDP_BT 5. 1 RPT Button (REPEAT) 7. CATEGORY Button Moves to the upper category from currently played category of the iPod. To move to (play) the category (song) displayed, press FOLDER , FOLDER button. You will be able to search through the lower category of the selected category. Repeats the song currently played. 4 15 Knowing your vehicle CAUTION IN USING BLUETOOTH® CELLULAR PHONE • Do not use a cellular phone or perform Bluetooth® settings (e.g. pairing a phone) while driving. • Some Bluetooth®-enabled phones may not be recognized by the system or fully compatible with the system. • Before using Bluetooth® related features of the audio system, refer your phone’s User’s Manual for phone-side Bluetooth® operations. • The phone must be paired to the audio system to use Bluetooth® related features. • You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g. in a tunnel, in a underground, in a mountainous area, etc.). • If the cellular phone signal is poor or the vehicles interior noise is too loud, it may be difficult to hear the other person’s voice during a call. (Continued) 4 16 (continued) • Do not place the phone near or inside metallic objects, otherwise communications with Bluetooth® system or cellular service stations can be disturbed. • While a phone is connected through Bluetooth® your phone may discharge quicker than usual for additional Bluetooth®-related operations. • Some cellular phones or other devices may cause interference noise or malfunction to audio system. In this case, store the device in a different location may resolve the situation. • Please save your phone name in English, or your phone name may not be displayed correctly. Knowing your vehicle BLUETOOTH® PHONE OPERATION (if equipped) remote control, etc. For more information, visit the Bluetooth® website at www.Bluetooth.com ■ General Features • This audio system supports Bluetooth® hands-free and stereo-headset features. - HANDS-FREE feature: Making or receiving calls wirelessly. - STEREO-HEADSET feature: Playing music from cellular phones (that supports A2DP feature) wirelessly. 1. VOLUME button : Raises or lowers speaker volume. 2. MUTE button : Mute the microphone during a call. 3. button : Places and transfers calls. 4. button : Ends calls or cancels functions. ■ What ■ Phone Setup All Bluetooth®-related operations can be performed in PHONE menu. 1) Push the SETUP button to enter SETUP mode. 2) Select FILE the “PHONE” item by using , TUNE button, then push button. OK ✽ NOTICE • The phone must be paired to the system before using Bluetooth® features. • Only one selected (connected) cellular phone can be used with the system at a time. • Some phones are not fully compatible with this system. 3) Select FILE the desired OK item by using button, then push button. TUNE is Bluetooth®? Bluetooth® is a wireless technology that allows multiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, wireless 4 17 Knowing your vehicle • Pairing a phone Before using Bluetooth® features, the phone must be paired (registered) with the audio system. Up to 5 phones can be paired with the system. NOTE: • The pairing procedure of the phone varies according to each phone model. Before attempting to pair phone, please see your phone’s User’s Guide for instructions. • Once pairing with the phone is completed, there is no need to pair with that phone again unless the phone is deleted manually from the audio system (refer “Deleting a Phone” section) or the vehicle’s information is removed from the phone. 1. Press SETUP button to enter SETUP mode. 2. Select “Phone”, then “Pair” in PHONE menu. 3. The audio displays “searching ---passkey: 0000” 4. Search the Bluetooth® system on your phone .Your phone should display your [vehicle model name] on the Bluetooth® device list. Then attempt pairing on your phone. 4 18 NOTE: If the phone is paired to two or more vehicles of the same model, i.e. both vehicles are HYUNDAI AZERA, some phones may not handle Bluetooth® devices of that name correctly. In this case, you may need to change the name displayed on your phone from AZERA to AZERA1 and AZERA2. Refer to your phone’s User’s Guide, or contact your cellular carrier or phone manufacturer for instructions. • Connecting a phone When the Bluetooth® system is enabled, the phone previously used is automatically selected and re-connected. If you want to select different phone previously paired, the phone can be selected through “Select Phone” menu. Only a selected phone can be used with the hands-free system at a time. 1. Press SETUP button to enter SETUP mode. 2. Select “Phone”, then “Select” in PHONE menu. 3. Select desired phone name from the list shown. • Deleting a Phone The paired phone can be deleted. - When the phone is deleted, all the information associated with that phone is also deleted (including phonebook). - If you want to use the deleted phone with the audio system again, pairing procedure must be completed once more. 1. Press SETUP button to enter SETUP mode. 2. Select “Phone”, then “Delete” in PHONE menu. 3. Select desired phone name from the list shown. • Changing Priority If several phones are paired with the audio system, the system attempts to connect following order when the Bluetooth® system is enabled: 1) “Priority” checked phone. 2) Previously connected phone 3) Gives up auto connection. 1. Press SETUP button to enter SETUP mode. 2. Select “Phone”, then “Priority” in PHONE menu. 3. Select desired phone name from the list shown. Knowing your vehicle • Turning Bluetooth® ON/OFF Bluetooth® system can be enabled (ON) or disabled (OFF) by this menu. - If Bluetooth® is disabled, all the commands related to Bluetooth® system prompts whether you wish to turn Bluetooth® ON or not. 1. Press SETUP button to enter SETUP mode. 2. Select “Phone”, then “BT Off” in PHONE menu. ■ Receiving a Phone Call When receiving a phone call, a ringtone is audible from speakers and the audio system changes into telephone mode. When receiving a phone call, “Incoming” message and incoming phone number (if available) are displayed on the audio. • To Answer a Call: - Press button on the steering wheel. • To Reject a Call: - Press button on the steering wheel. • To Adjust Ring Volume: - Use VOLUME buttons on the steering wheel. • To Transfer a Call to the Phone(Private Call): - Press and hold button on the steering wheel until the audio system transfers a call to the phone. ■ Talking on the Phone When talking on the phone, “Active Calls” message and the other party’s phone number (if available) are displayed on the audio. • To Mute the Microphone - Press MUTE button on the steering wheel. • To Finish a Call - Press button on the steering wheel. ■ Making a Phone Call A Call Back can be made by pressing button on the steering wheel. - This is the same function as using the button solely on the cellular phone. NOTE: Some phone models require pressing button twice to make a call. 4 19 Knowing your vehicle ✽ NOTICE In the following situations, you or the other party may have difficulty hearing each other: 1. Speaking at the same time, your voice may not reach each other parties. (This is not a malfunction.) Speak alternately with the other party on the phone. 2. Keep the Bluetooth® volume to a low level. High-level volume may result in distortion and echo. 3. When driving on a rough road. 4. When driving at high speeds. 5. When the window is open. 6. When the air conditioning vents are facing the microphone. 7. When the sound of the air conditioning fan is loud. 4 20 ■ Bluetooth® Audio Music Streaming This audio system supports A2DP (Audio Advanced Distribution Profile) and AVRCP(Audio Video Remote Control Profile). Both profiles are available for listening to the MP3 music via Bluetooth cellular phone supporting above Bluetooth profiles. To play MP3 music from the Bluetooth cellular phone, press the MEDIA button until “MP3 Play” is displayed on the LCD. Then try playing music by phone. When playing music from the Bluetooth cellular phone, the head unit displays MP3 MODE. NOTE: • Not only MP3 files, all the sounds that the phone supports can be heard by the audio system. • The Bluetooth cellular phones shall feature A2DP and AVRCP functions. • Some A2DP and AVRCP Bluetooth cellular phones may not play music through the head unit on first try. Please try the below; i.e : Menu➟Filemanager➟Music➟ Option➟Play via Bluetooth • Please refer to User's Guide of your phone for more. To stop music, try stop playing music from the phone then change the audio mode to other than “MP3 Play” mode (e.g. FM, AM, CD, etc.)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2013:06:03 13:09:27+09:00 Create Date : 2011:01:06 10:54:08+09:00 Metadata Date : 2013:06:03 13:09:27+09:00 Format : application/pdf Title : H_HG_'1012_GEN(0104).qxp Creator : Administrator Document ID : uuid:0b2ba43b-9aaf-40a3-bc2d-1e32193b2146 Instance ID : uuid:d400614f-0823-47cb-a515-431c6c8d7148 Page Count : 22 Author : AdministratorEXIF Metadata provided by EXIF.tools