HYUNDAI MOBIS ADC30C6AN DIGITAL CAR AVN SYSTEM User Manual Part 1

HYUNDAI MOBIS CO., LTD. DIGITAL CAR AVN SYSTEM Part 1

Contents

User Manual Part 1

CAR MULTIMEDIA SYSTEM USER'S MANUAL
Read the following safety precautions for your safetyBefore using the product, read the contents of this user's manual carefully and use this product safely.※ The design and specifi cations of this product may change without prior notifi cation for product and service improvement.The actual features in the vehicle may differ from the illustrations.For more accurate information about the vehicle, please refer to the     catalogue.※  This Audio system contains open source software, including without limitation, software distributed and/or modifi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999.  For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.krNotations used within this User's Manual WARNING•  Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. CAUTION•  Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safetyi Information•  Information and tips that provide additional user convenience in using the product NOTICE•  Information on specific features that facilitate proper product use and functional understanding•  Information on terminology used within this manual
iPod®iPod® is a registered trademark of Apple Inc.Bluetooth® Wireless TechnologyA compatible Bluetooth® Wireless Technology-enabled cell phone is required to use Bluetooth® Wireless Technology.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license.Other trademarks and trade names are those of their respective owners.A Bluetooth® enabled cell phone is required to use Bluetooth® Wireless Technology.Bluetooth® Wireless Technology phone compatibility can be checked by visiting http://www.kia.com.Wi-Fi®The Wi-Fi CERTIFIED™ Logo is a certifi cation mark of Wi-Fi Alliance.
Warnings and CautionsKey Product FeaturesComponent Names and FunctionsStarting the System for the First Timepart.1 Basic
1-2 I Basic Safety Warnings•  Do not stare at the screen while driving. Staring at the screen for prolonged peri-ods of time could lead to traffic accidents.•  Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock.•  Heed caution not to spill water or intro-duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.•  If you use phone related functions while driving, you will find it difficult to concen-trate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked.•  Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-function. Continued use in such con-ditions could lead to accidents (fires, electric shock) or product malfunctions.•  Do not touch the antenna during thun-der or lightening as such acts may lead to lightning induced electric shock.•  Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.•  For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for man-ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)•  Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked.  Basic
Warnings and Cautions I 1-301 Safety CautionsPay attention to traffic conditions while driving. •  Operating the device while driving could lead to accidents due to a lack of atten-tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-cle is in motion. The touch screen fea-ture will be supported once the vehicle has stopped.•  Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.•  Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-ment. (Adjust the volume to a suitable levels before turning off the device.)•  If you want to change the position of device installation, please inquire with your place of purchase or service main-tenance center. Technical expertise is required to install or disassemble the device.•  Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.•  Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.•  Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.•  When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.•  Prevent caustic solutions such as per-fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.
1-4 I BasicKey Product FeaturesThis device is a Multimedia system equipped with a multifunc-tional player that supports Radio (FM, AM), SiriusXM™, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.DisplayWide TFT-LCD Display•  Provides high quality video through a Wide TFT-LCD Display using an LED Back Light.•  Touch screen for maximum user convenience.RadioDigital Tuner Feature•  Digital Tuner using PLL method that supports memory of 40 broadcast stations.Radio broadcast station name•  Displays broadcast station names.MultimediaPlayerSupport for various Media Formats•  Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth® Audio Streaming modes My Music•  Supports copying of music stored within USB devices into My Music (internal memory) modeMiscellaneousBluetooth® Wireless Technology•  Convenient use of Bluetooth® Handsfree by using buttons within the steering wheel controlDigital Screen Control Features•  Easy control of features through touch screen optionsSteering Wheel Control•  Control over audio features, voice recognition and Bluetooth® through the steering wheel control for maximum convenience
Component Names and Functions I 1-501Component Names and FunctionsHead UnitName DescriptionRADIOSelects FM/AM/SiriusXM™ mode• Each time this is pressed, the mode is changedin the following order: FM → AM → SiriusXM™ → FM.MEDIASelects MEDIA mode.• If the media is not connected MEDIA mode willnot be activated.TRACKSEEKWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: Plays the previous/next fre-quency.• SiriusXM™ mode: Changes the channel.• MEDIA (USB/iPod/My Music) mode: Changesthe track, file or title (except for USB Image andAUX).When pressed and held down (more than 0.8 sec-onds),• FM/AM mode: Continuously changes the fre-quency until the key is released.• MEDIA (USB/iPod/My Music) mode: Rewindsor fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX). POWER/VOL • When power is off, press to turn power on.• When power is on, press and hold (more than0.8 seconds) to turn the power off.• When power is on, press quickly (less than 0.8seconds) to turn Audio off.• Turn left/right to adjust the volume.Name DescriptionPHONEDisplays the Bluetooth phone mode.APPS/Moves to the Apps/Info screen.UVOMoves to the UVO modeSETUPMoves to the Setup screen. TUNE• FM/AM mode: Changes the frequency.• SiriusXM™ mode: Changes the channel.• MEDIA (USB/iPod/My Music) mode: Changesthe track, file or title (except USB Image,Bluetooth Audio, and AUX).RESET Resets the system settings. (Preset radio channelsand other data will not be deleted)※ The actual feature in the vehicle may differ from the illustration.
Component Names and Functions I 1-701Name DescriptionWhen pressed quickly (less than 0.8 seconds),• Activates voice recognition.When pressed and held (more than 0.8 seconds),•  Ends voice recognition.• If iOS device is connected through Bluetooth,activates or ends Siri Eyes Free.MODE•  Each time this is pressed, the mode is changed in the following order: FM → AM → SiriusXM → USB or iPod → AUX → Bluetooth Audio → My Music →→ FM• If the media is not connected, the correspondingmodes will be disabled• Press and hold (more than 0.8 seconds) to turnthe Audio system on/off• When power is off, press button to turn powerback onVOL +VOL -Controls the volumeWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: searches broadcast frequenciessaved to Presets• SiriusXM™ mode: searches broadcast channelssaved to Presets• MEDIA (USB/iPod/My Music) mode: changes thetrack, file or title (except USB Image, AUX)When pressed and held (more than 0.8 seconds),• FM/AM mode: automatically searches broadcastfrequencies• SiriusXM™ mode: automatically searches broad-cast channels• MEDIA (USB/iPod/My Music) mode: quicklylooks up songs (excluding USB images, AUX and Bluetooth audio files)Steering Wheel ControlsName DescriptionWhen pressed quickly (less than 0.8 seconds),• When pressed in the dial screen, makes a call• When pressed in the incoming call screen,answers the call• When pressed during call waiting, switches towaiting call (Call Waiting)When pressed and held (more than 0.8 seconds),• When pressed in Bluetooth® Hands-free, redialsthe last dialed call• When pressed during a Bluetooth® Hands-freecall, switches call back to mobile phone (Private)• When pressed while calling on the mobile phone,switches call back to Bluetooth® Hands-free (operates only when Bluetooth® Hands-free is connected)• When pressed during a call, ends the phone call• When pressed in the incoming call screen, rejectsthe call※ The actual feature in the vehicle may differ from the illustration.
Starting the System for the First Time I 1-901Starting the System for the First TimeTurning the System On/OffPress the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean, select the Language button. NOTICE•  You cannot operate the system while it isbooting up. It may take some time for all offeatures of the system, particularly the voicerecognition system, to be ready for use.Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver.i Information •  If you turn off the system during a phone callusing the Hands-free feature, then the call willautomatically switch to your mobile phone.  NOTICE•  Check the volume when turning on thesystem. Before turning on the system, adjustthe volume to a reasonable level.System ResetThe System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.)
1-10 I BasicBattery Warning MessageAlways use the system while the car engine is running. If you turn on the sys-tem while the engine is off, a battery warn-ing message will appear. When the engine starts, the message will disappear.  NOTICE•  If you use the system for a long time with the engine off, the battery may become completely discharged.Restrictions on Features for Safety MeasuresSeveral features are limited while driving.The restriction screen will disappear when shifting gears into P or putting the parking brake on. WARNING- Blank Screen•  Refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fi res, electric shock). WARNING- Touching the Antenna During A   Thunder Storm •  Do not touch the antenna during thunder or lightning as such acts may lead to lightning induced electric shock.
Starting the System for the First Time I 1-1101Home ScreenControls Menu Confi guration for the Home ScreenTap the   icon on any screen to display the Home Screen below.Features Description Radio/Media Widget•  Shows brief information on the radio or media that is now playing.•  Tap the area to move to the mode that you are listening to. Connectivity WidgetShows any connected devices such as iPod, and Bluetooth. All Menus Shows all of the items in the system menu. My Menu•  You can add up to eight menus here.•  Add your favorite menus to have quick and easy access to them. Apps/Info Moves to the Apps/Info screen. Setup Moves to the Setup screen.Information Display on the Status BarDisplays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-tem status details and events.Icon DescriptionDisplayed when the audio is muted.Displays the remaining battery of the Bluetooth phone.Displayed when connected to Bluetooth for handsfree.Displayed when connected to Bluetooth for streaming audio.Displayed when connected to Bluetooth for streaming audio and handsfree.Displayed when downloading contacts or recent calls from the Bluetooth phone.Displayed while on a call with the Bluetooth phone.Displayed when the microphone of the Bluetooth is muted.Displays the signal strength of the Bluetooth phone.Displayed when connected to Wi-Fi.Displayed when connecting to Wi-Fi.Displayed when 911 connect is available.
1-12 I BasicAdding Your Favorite Menu Items to My MenuFrom the Home screen, select My Menu icon, and then Edit.From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left.To remove the item from My Menu, drag item from the left and drop them on the right.i Information •  Up to eight items can be added to My Menu.On-Screen Touch ControlsLearn how to touch the screen to operate the system. SelectTap lightly on a menu or an item to select it.  NOTICE•  The system will not recognize your touch if you wear a glove or other non-conductive material. Touch the screen using your fi nger, an electrostatic touch-screen glove, or a stylus pen.Drag & DropSelect a menu or item you want, then drag and drop it to where you want to place it.Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from.
Starting the System for the First Time I 1-1301Drag the frequency bar to the left or right to move to the frequency that you want. From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu.Flick (Quick Scrolling)Quickly moves up and down in the list. NOTICE•   Moving the list when there are many items will display a handler on the right of the display. You can easily move many items at a time with the handler.You can view the previous or next image by flicking left/right on an image on the USB Image screen.Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available.
1-14 I BasicPress and HoldPressing the   and   buttons in the music player will fast forward/rewind the music.
FM/AM (with HD Radio™)HD Radio™ Technology (if equipped)FM/AMSiriusXM™USBiPodAUXBluetooth® AudioMy Musicpart.2 Radio/Media
2-2 I Radio/MediaFM/AM (with HD RadioTM)You can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home  screen.FM/AM Mode Display Controlsi Information•  If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode.•  If you are in radio mode, select the media widget from the Home screen to access the radio player.Features Description PresetFrequencies•  The stored preset frequencies are displayed for user selection.•  After selecting frequency, press and hold the preset button for more than 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button.•  Flick the preset frequencies up/down to scroll quickly through presets. Frequency Bar•  Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel.•  Dragging: Drag the frequency bar to the left/right to find the radio channel that you want. Frequency Displays the current frequency. TagSaves the current music’s tag information to the head unit. If connected to iPod, the tag informa-tion can be saved on the device.  Presets Shows the stored presets for user selection.  Menu• ListMoves to the frequency list.• InfoTurns the Radio text information transmitted from the broadcasting station on and off.• Preset ScanPlays preset frequencies for 10 seconds per item.• Sound SettingsMoves to the Sound Settings.Radio/Media
02FM/AM (with HD Radio™) I 2-3Features Description Scan/Preset     ScanDisplays an active mode from Scan and Preset Scan modes. Band Changes to the desired band from among FM, AM, and SiriusXM.  HD Radio (if equipped)Used to set whether to turn HD Radio™ recep-tion On or Off.    ScanShortly plays the broadcasts for the frequen-cies with superior reception for 5 seconds per item. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Seeks the previous/next frequency.•When pressed and held (more than 0.8 sec-onds): Moves quickly through all of the fre-quencies. The moment that you release thebutton, the system seeks the next availablefrequency. TUNETurn the  TUNE knob to manually seek avail-able frequencies.•FM: Increment/decrement by 200 kHz•AM: Increment/decrement by 10 kHz
2-4 I Radio/MediaIf an HD Radio™ broadcast is received, the radio mode will switch from analog broadcast to HD Radio™ broadcast.i Information•  The HD Radio™ screen is displayed only when a HD Radio™ broadcast is being received.Program Service Data:     Contributes to the superior user experience of HDRadio™ Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.    Adjacent traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, origi-nal music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio™ Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.HD Radio™ Technology (if equipped)
HD Radio™ Technology (if equipped) I 2-502HD Radio™ Mode Display ControlsName Description HD Radio™ Reception & Channel buttonsDisplays main HD Radio™ channels and used to directly select the current available channels.  The HD Radio™ related icon display becomes active within regions where an HD Radio™ signal can be received. HD Channel Number Analog station and corresponding HD Radio™ channel number saved in the pre-set list. HD Broadcast InfoDisplays detailed information about the cur-rent broadcast (the details of the information shown are different depending on whether the Info button is selected) HD RadioWhen the HD Radio™ soft button is ON (the red indicator on the HD Radio™ button is illuminated), HD Radio™ signals will be received.
2-6 I Radio/MediaFM/AMYou can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home  screen.FM/AM Mode Display Controlsi Information•  If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode.•  If you are in radio mode, select the media widget from the Home screen to access the radio player.Features Description PresetFrequencies•  The stored preset frequencies are displayed for user selection.•  After selecting frequency, press and hold the preset button for more than 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button.•  Flick the preset frequencies up/down to scroll quickly through presets. Frequency Bar•  Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel.•  Dragging: Drag the frequency bar to the left/right to find the radio channel that you want. Frequency Displays the current frequency.  Presets Shows the stored presets for user selection.  Menu• ListMoves to the frequency list.• Preset ScanPlays preset frequencies for 10 seconds per item.• Sound SettingsMoves to the Sound Settings.
FM/AM I 2-702Features Description  Scan/ Preset ScanDisplays an active mode from Scan and PresetScan modes. Band Changes to the desired band from among FM, AM, and SiriusXM.  Info Turns the Radio text information transmitted from the broadcasting station on and off.    Scan Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Seeks the previous/next frequency.•When pressed and held (more than 0.8 sec-onds): Moves quickly through all of the fre-quencies. The moment that you release thebutton, the system seeks the next availablefrequency. TUNETurn the  TUNE knob to manually seek avail-able frequencies.•FM: Increment/decrement by 200 kHz•AM: Increment/decrement by 10 kHz
2-8 I Radio/MediaSiriusXM™You can access the radio player either by pressing the RADIO key or by selecting the Radio menu option from All Menus on the Home screen. Select the SiriusXM™ band from the radio player.SiriusXM™ Mode Display Controls                   i Information•  If you press the RADIO key when the power is off, the power will turn on and a radio broadcast will be tuned from the current mode.•  If you are in the SiriusXM™ mode, select the SiriusXM™ radio widget from the Home screen to access the radio player.•  When the power is off, pressing the RADIO key will turn the power on and play a SiriusXM™ Radio broadcast.Features Description  Preset Frequencies•  Shows the stored presets for user selection.•  After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Channel Logo Displays the current channel logo. Channel Info Displays the current channel number and name. Content Info Displays the artist, title and other information about the current playing song. Category Info Displays the category of the currently playing song. Band Changes to the desired band from among FM, AM, and SiriusXM. Direct Tune Used to search for the desired channel by entering the channel number. Scan Plays all receivable channels for 10 seconds per item. Category Lock If pressed, only the channels for the current category can be searched or scanned.  Category Selection Buttons Used to select the previous/next category. Play Live Switches to the live broadcast mode. Skip BackwardRepeats the previously broadcasted program.•  Holding for less than 0.8 seconds: Moves to the previous segment.•  Holding for more than 0.8 seconds: Moves to the previous 5 seconds.
SiriusXM™ I 2-902Features Description Play/Pause Pauses/plays the current broadcasting program. Skip Forward Moves to the next segment. TagSaves the current music’s tag information to the head unit. If connected to iPod, the tag informa-tion can be saved on the device. Presets Shows the stored presets for user selection. List Moves to the channel list. Menu•What is on My Presets?The program schedule saved in my preset. (For more details, see Section 3.10. Viewing Menu.)• Featured FavoritesTheme channels recommended by SiriusXM™.(For more details, see Section 3.10. Viewing Menu.)• Preset ScanPlays preset channels for 10 seconds each.• Sound SettingsMoves to the Sound Settings. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Plays the previous/next channel.•When pressed and held (more than 0.8 sec-onds): Continuously changes the channeluntil the key is released and plays the currentchannel. TUNE Changes the channel.
2-10 I Radio/MediaSelecting through Channel/Category ListSelect the List ▶ Select the desired cat-egory and channel.Select the desired category and the chan-nel. Once selected, the previous screen will be restored and the selected channel will begin playing.If you select the Skip button, you can scan channels using the SEEK TRACK key or the  TUNE knob by skipping the channels that you chose to skip. Direct TuneEnter the number of the channel you want to receive.Viewing MenuUsing the Menu button on the right, you can view the program schedule and infor-mation about the Featured Favorites pro-vided by SiriusXM™.
SiriusXM™ I 2-1102What is on My Presets? (Program Schedule)You can select Menu to see program information and the sched-ules of broadcast channels listed in the presets. Name Description ChangeBroadcast DateBy selecting this option, you can select a broad-casting date.Broadcast information will be provided for one week from the current date. PresetShows saved presets for user selection A total of 40 frequencies for SiriusXM™ modes can be displayed. ProgramInformationShows you the program titles to be broadcasted at the time that you have chosen.Select a program to see more details. If there is more information on the program you selected, an arrow button will be displayed on the right of the list. You can see more program information by selecting the arrow button.
2-12 I Radio/MediaFeatured FavoritesFeatured Favorites feature allows SiriusXM™ to broadcast additional presets.•  Example 1: “Martha’s Favorites” may represent Martha Stuart’s favorites pre-sets on her radio. •  Example 2: During holidays, “Holiday Music” may represent all the SiriusXM™ channels that are playing the holiday music for easy access by users. Multiple sets Featured Favorites data can be broadcast by SiriusXM™ and can change from time to time.
USB I 2-1302USBBefore Playing a USB MP3Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.•  Files that are not standard format music/image files will not be played.•  For MP3/WMA/OGG files, only music files with compression rates between 8Kbps ~ 320Kbps can be played.•  Heed caution to static electricity when connecting/disconnecting external USB devices.•  Encoded MP3 Players will not be recognized when connected as an external device.•  When connecting an external USB device, the device may not properly recognize the USB is in some states.•  Only products formatted with byte/sectors under 64Kbyte will be recognized.•  USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-tem, are recommended. File systems other than FAT12, FAT16, FAT32, exFAT, and NTFS are not supported.•  Some USB devices may not be supported due to compatibility issues.•  Take caution so that the USB connector does not come in con-tact with body parts or objects.•  Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction.•  Make sure to connect/disconnect external USB devices with the audio power turned off.•  The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB.•  The use of USB devices for purposes other than playing music and image files is prohibited. •  Do not use the USB I/F to charge batteries or USB accessories that generate heat. Such acts may lead to worsened perfor-mance or damage to the device.•  The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle.•  When using mass storage USB devices with separate logical drives, only files saved to the root drive can be played.•  When application programs are installed to specific USBs, files may not properly play.
2-14 I Radio/Media•  The device may not operate normally if MP3 Players, cellu-lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device.•  Charging through the USB may not work for some mobile devices.•  The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory.•  The device may not support normal operation when using for-mats such as HDD Type, CF, or SD Memory.•  When playing iPods, please use a dedicated iPod car cable. •  Normal operation cannot be guaranteed when other cables are being used.•  The device will not support files locked by DRM (Digital Rights Management).•  USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized.•  Only use Plug type connector products, as shown in the figure below.•  To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con-sole storage (if equipped) is for charging only.Product Name  Manufacturer XTICK LG BMK BMK Technology SKY-DRV Sky Digital TRANSCEND JetFlash  Transcend Sandisk Cruzer  SanDisk Micro ZyRUS  ZyRUS NEXTIK Digiworks i Information•   Problems that occur through use of USB devices not listed within the above table are not covered by the product warranty.Plug Type Connector
USB I 2-1502Supported USB MP3 music specifi cationsName DescriptionMP3 File Specification  Specification: MPEG1 AUDIO LAYER 3Recommended Bit Rates and Sampling FrequencyAcceptable sampling frequency: 32, 44.1, 48 (kHz)Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)96, 128, 192 Kbps fixed bit rate/44.1kHzID3 Tag   Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tagsDetailed Specifications Maximum directory layers: 20 layersMaximum length of folder name/file name: 255BytesSupported characters for folder name/file name: Alphanumeric characters, Korean standard charac-ter set 2,350 characters, Simplified Chinese 4888 charactersMaximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored ontoone USB: 8000i Information•  The sound quality of MP3 files that use bitrates exceeding 192 Kbps cannot be guaranteed. When using fi les without fi xed bit rates, some features (FF/REW features) may not properly operate.Supported Image Specifi cationsName DescriptionImage format JPG, GIF, BMP, PNG (animated GIF, etc. are not supported)Supported image file size5M pixels for JPG, BMP, PNG (1M pixels maxi-mum for GIF)
2-16 I Radio/MediaUSB Music Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files within the USB  Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the current operating function Play Time Displays the current play time/total play time Song InfoDisplays the information of the current track•  When a track in the file tab on the list screen is selected: Displays folder, file, title, artist, album info•  When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button  Converts to basic mode screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•  If play time is less than 3 seconds, moves to previous file•  If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File•  If button is pressed (less than 0.8 seconds): Moves to the next file•  If button is pressed (more than 0.8 seconds): It fast-forwards the track RepeatRepeats the current file•  If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song, repeating folder, and turning repeat off•  If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-ing one song and turning repeat off ShufflePlays files in random order•  If select the song in the file tab on the list screen: Select the Shuffle button to switch between Shuffle Folder, Shuffle All, and turn-ing shuffle off •  If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Shuffle button to switch between Shuffle Category and turning shuffle off
USB I 2-1702Features Description ScanScans the beginning parts of USB files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between Scan Folder, Scan All, and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between Scan category and turning scan off Menu • Add to Playlist: Add the current track to thePlaylist: Playlist is placed on the left tab in thelist•Save to My Music: You can save the currenttrack to My Music. You can play saved trackfrom My Music without USB. Access to MyMusic in the Media mode.•Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, select the  TUNE knob to play the track. If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
2-18 I Radio/MediaFeatures Description  Folder/  Category Name Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen   Upper Folder/     Category Moves to Upper FolderFeatures Description Menu • Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a desired trackand press “Add to Playlist” to add the track inthe playlist.• Delete from Playlist: Select a track you want todelete from the playlist and press “Delete fromPlaylist” to delete the track in the playlist•Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file)• Save to My Music: Stores the music. Thestored music can be played in My Music. (Thisfunction is not provided in Playlist.) Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album.   If access the search menu while playing a  track, it moves to the previous search mode.  SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. TUNETurn the  TUNE knob to move the focus to the previous/next list. If the desired track is displayed, press  TUNE knob to play the track.
USB I 2-1902USB Image Mode Display ControlsFeatures Description Mode Displays the current operating mode Folder/File Name  Displays folder name where image is located File Index  Shows the current file/total files within the USB Slideshow  Images as slideshow in 5, 10, 20, 30 second intervals Rotate  Rotate image in clockwise direction Info Shows the file name, resolution and file type of current image Adjust Image Size Enlarge/reduce (zoom-in/zoom-out) image size List Moves to the list screen Previous/Next imageSwipe image left or right to see Previous/Next image
2-20 I Radio/MediaFeatures Description Current File Displays the current playing file name Back Button Converts to basic mode screen MenuNow Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the cur-rent list includes the current file)   SEEK/TRACKControls background mode•  Radio mode: Changes Frequency and Channel•  Media mode: Changes Track (excluding AUX) TUNEControls background mode•  Radio mode: Changes Frequency and Channel•  Media mode: Changes track (excluding AUX). If a desired track is displayed, press the knob to move to the track.
iPod I 2-2102iPodUsing iPod Devices•  iPod is a registered trademark of Apple Inc.•  iPod mode will not operate if the con-nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop-erly operate with the Multimedia system.•  For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use. •  Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system.•  If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual)•  If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in a short time, it may cause abnormal operation. •  The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version.•  For some iPod Touch and iPhone devices, connecting Bluetooth® while the iPod is operating may result in discon-tinued iPod sound. When such devices with Bluetooth® support are connected, this problem occurs as the sound source is changed from the Dock Connector (USB connector cable) to Bluetooth.•  To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec-tion or Bluetooth Audio with Bluetooth connection.•  To listen to the iPod sound, reconnect the USB cable or change the audio out-put settings in iPod/iPhone to Dock.•  In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products)※ During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/iPhone product.) will charge the iPod through the head unit.※ ※ The use of genuine iPod cables sup-The use of genuine iPod cables sup-plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.)noise or abnormal operation.)※ To play iPod music through cable con-nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
2-22 I Radio/Media•  When connecting with the iPod cable, make sure to fully insert the jack to pre-vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/paused.•  Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again.•  When connecting to iPod Nano/Classic, the Kia Motor logo appears on the Apple device. For the iPod Nano 6 genera-tion, however, the logo image does not appear since it is not supported. Also, all iPhone and iPod Touch products do not support this function.•  In Apple’s iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications spe-cifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the  iPod mode.•  If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode.•  The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con-nected device.
iPod I 2-2302 Caution•  While using a connected iPhone/iPod Touch device, it may not operate nor-mally if the user changed some func-tions in the device.   •  When calling with an iPhone connec-tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status. •  If lots of songs have the same informa-tion, skipping may occur when previous/next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version.•  If lots of songs have the same informa-tion, the song that plays may be differ-ent between the system and the Apple device. Reset the device or delete the same songs in the Apple device using iTunes. •  If you control pause, repeat, shuffle, or seek songs when the play time is less than 3s before the song is finished play-ing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device. •  We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related issues. Type 1G 2G 3G 4G 5G 6G 6.5G 7GiPod Mini Not SupportediPod Shuffle Not SupportediPod Nano ○ ○ ○○○ ○Not released ○iPod Touch○(iOS 1.1 not sup-ported)○ ○○○ Not releasediPad ○ (Unable to charge, Not verified, Normal working not guaranteed)iPad Mini ○ (Unable to charge, Not verified, Normal working not guaranteed)iPod Classic  Not Supported ○(iPod with Video)○(iPod Classic)○(iPod Classic)Not releasedType 3G 3GS 4 4S 5 5C 5S 6 6+iPhoneNot verified, Normal working not guaranteed○○○○○○○○
2-24 I Radio/Media Caution•  If the iPhone/iPod Touch supports Bluetooth, the Apple device will not be able to use the Bluetooth function if the device is connected through both the USB port and via Bluetooth. Disconnect the USB connection then use Bluetooth Audio.•  If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode.•  If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys-tem, it may occur sound will not output in iPod mode due to iPod/iPhone’s fea-ture. Especially, if you use AUX cable like pictures, this problem may occur. •  Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to “Dock” in iPod/iPhone.•  If connect to the Multimedia system while podcast or iTunes music down-loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted.•  If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual)•  iPhone and iPod Touch devices are guaranteed to work normally on iOS 9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested.
iPod I 2-2502iPod Mode Display ControlsFeatures Description Mode   Displays the current operating mode  Song Index Shows the current song/total songs Repeat/Shuffle From Repeat/Shuffle, displays the current oper-ating function  Play Time  Displays the current play time/total play time Song Info Displays the artist/song title/album info List Moves to the list screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•  If play time is less than 3 seconds, moves to previous file•  If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File•  If button is pressed (less than 0.8 seconds): Moves to the next file•  If button is pressed (more than 0.8 seconds): It fast-forwards the track Repeat Repeats the current fileSelect the Repeat button to switch between repeating 1 track, and turning repeat off ShufflePlays files in random orderWhen selecting the Shuffle button, it changes to shuffle category → deactivate shuffle then repeat•  Shuffle Category: Shuffle song in the current category Back Button  Move to home/previous mode screen Menu Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.
2-26 I Radio/MediaFeatures Description TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track.  If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track info    for the current track is restored.
iPod I 2-2702Features Description Category Name Displays the category name  Category ListDisplays the contents of selected category   If there are many items in the list, items are  added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Category Moves to Upper Category Search MenuSearch tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook.  If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK•If button is pressed (less than 0.8 seconds):Plays previous/next track.•If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewindor fast-forward the track. TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track.If you do not anything with the knob for 5 seconds, the  TUNE knob search will be terminated.
2-28 I Radio/MediaAUXConnecting an External DeviceIf an external device connector is con-nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.•  AUX mode can be used only when an external audio player has been con-nected.•  The AUX volume can also be controlled separately through the connected device. NOTICE•  If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.•  When the external device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use.※  The actual feature in the vehicle may differ from the illustration.
02Bluetooth® Audio I 2-29Bluetooth® AudioBluetooth Audio Mode Display ControlsFeatures Description Mode Displays the current operating mode Phone Name  Displays name of connected phone  Artist Info Name of current artist Features Description Title Name of current song  Previous File• If play time is less than 3 seconds, moves tothe previous file•If play time is more than 3 seconds, plays thecurrent file from the beginning  This function may differ depending on themodel of mobile phone. Play/Pause Plays/Pauses Bluetooth Audio Next File Moves to the next file RepeatRepeats the current file.  This function may differ depending on the model of mobile phone. ShufflePlays files in random order.  This function may differ depending on the model of mobile phone. Menu•Connections: Moves to the Bluetooth Settingsscreen. You can pair a new device or change/delete paired device(s).•Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. SEEK/TRACK Plays the previous/next file TUNE  TUNE is not supportedi Information•  Artist info and Title may not be supported by mobile phone
2-30 I Radio/MediaBluetooth Connection SettingsSettings for pairing, connection and dis-connection of a Bluetooth device.•  In Bluetooth Audio play screen, select  Menu and then Connections.i Information•  If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones. •  Please check the Bluetooth compatibility in below website: KIA Motors Corporation http://www.kia.com
My Music I 2-3102My MusicMy Music Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files  Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the cur-rent operating function Play Time Displays the current play time/total play time Song InfoDisplays the information about the current track•  When a track in the file tab on the list screen is selected: Displays file, artist, title, album info•  When a track in the other tab on the list screen is selected: Displays artist, title, album infoFeatures Description List Moves to the list screen Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•  If play time is less than 3 seconds, moves to previous file•  If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File •  If button is pressed (less than 0.8 seconds): Moves to the next file•  If button is pressed (more than 0.8 seconds): It fast-forwards the track RepeatRepeats the current file•  If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song and turning repeat off.•  If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-ing one song and turning repeat off
2-32 I Radio/MediaFeatures Description ShufflePlays files in random order• If select the song in the file tab on the listscreen: Select the Shuffle button to switch between shuffle and turning shuffle off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Shuffle button to switch between shuffle and turning shuffle off Scan Scans the beginning parts of files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between scan and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between scan and turning scan off Menu • Add to Playlist: Adds the current song to thePlaylist: Playlist is placed on the left tab in the list• Delete Current File: Deletes the current trackfrom My Music.• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of the sound.  TUNETurn the   TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track. If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
My Music I 2-3302Features Description  Folder/ Category Name  Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen  Upper Folder Moves to Root FolderFeatures Description Menu• Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a track andpress “Add to Playlist” to add the track in theplaylist• Delete from Playlist: Select a track from theplaylist and press “Delete from Playlist” todelete the track in the playlist•Delete Files: Deletes files from My Music If delete file from My Music, the informationrelated to song also deleted in the list.• Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album.  If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. TUNETurn the  TUNE knob to move the focus to pre-vious/next file. If the file you want to play is dis-played, press  TUNE knob to play the track. If the  TUNE knob is not pressed within 5 seconds of searching tracks, Tune search will be terminated.
MEMO
Before Using the Bluetooth® HandsfreeBluetooth ConnectionBluetooth Phonepart.3 Bluetooth
3-2 I Bluetooth Before Using the Bluetooth® HandsfreeWhat is Bluetooth® Wireless Technology?•  Bluetooth® Wireless Technology refersto a short-distance wireless network-ing technology which uses a 2.45GHzfrequency to connect various deviceswithin a certain distance.• Supported within PCs, external devices,Bluetooth® phones, PDAs, various elec-tronic devices, and automotive environ-ments, Bluetooth® Wireless Technologyto be transmitted at high speeds withouthaving to use a connector cable.• Bluetooth® Handsfree refers to a devicewhich allows the user to convenientlymake phone calls with Bluetooth®mobile phones through the Multimediasystem.• The Bluetooth® Handsfree feature maynot be supported in some mobile phones. For more information on mobile phonecompatibility, visit the KIA Motor website- KIA Motors Corporation: http://www.kia.com WARNING- Distracted Driving•  Focus on the road while driving. The driver'sprimary responsibility is in the safe and legaloperation of the vehicle. Drivers should notuse any hand held devices or other equipment or vehicle systems that distract the driverduring vehicle operation.•  Do not stare at the multimedia screen for long periods of time while driving. Staring at thescreen for prolonged periods of time can leadto traffi c accidents and can result in personalinjuries.Precautions for Safe Driving• Bluetooth® is a feature that enables driv-ers to make handsfree calls. Connectingthe head unit with a Bluetooth® phoneallows the user to conveniently makecalls, receive calls, and manage thephonebook. Before using Bluetooth® Wireless Technology, carefully read thecontents of this user’s manual.•Excessive use or operations while driv-ing may lead to negligent driving prac-tices and be the cause of accidents. Donot operate the device excessively whiledriving.••Viewing the screen for prolonged peri-Viewing the screen for prolonged peri-ods of time is dangerous and may leadods of time is dangerous and may leadto  accidents. When driving,  view  theto accidents. When driving, view thescreen only for short periods of time.screen only for short periods of time.Bluetooth
03Before Using the Bluetooth® Handsfree I 3-3CAUTIONS upon Connecting Bluetooth® Phone•  Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth® features.•  Even if the phone supports Bluetooth® Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth® power is turned off. Disable the hidden state or turn on the Bluetooth® power prior to searching/connecting with the head unit.•  If Auto Connection is used, the Bluetooth® phone is automatically con-nected when the ignition is turned on, making it unnecessary to have to con-nect the phone with the head unit every time.•  If you do not want automatic connection with your Bluetooth® device, turn the Bluetooth® feature off of the Bluetooth® device.•  Park the vehicle when connecting the head unit with the mobile phone.• Bluetooth® connection may become intermittently disconnected in some mobile phones. Follow these steps to try again.1. Turn the Bluetooth® function within the mobile phone OFF/ON and try again.2. Turn the mobile phone power OFF/ON and try again.3. Completely remove the mobile phone battery, reboot, and then again.4. Reboot the Multimedia System and try again.5. Delete all paired devices from both of Phone and Head Unit sides and then try again.•  The Handsfree call volume and quality may differ depending on the mobile phone.• Pairing Bluetooth® devices and use of other Bluetooth® features are not sup-ported when the vehicle is in motion. For safety, please first park your vehicle. •  If you continue having issue download-ing your contacts to your vehicle, con-tact your mobile phone provider.
3-4 I Bluetooth Bluetooth ConnectionPairing a New DeviceBefore you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car.Up to 5 Bluetooth devices can be paired.Only one Bluetooth device can be con-nected at a time.Pairing a New Device by Selecting Phone/CallPress the PHONE key or   key in the steering wheel control. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.Pairing a New Device Through thePhone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection.  ▶ Select Add New. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authoriza-tion popup. ▶ Connect Bluetooth.The default passkey is 0000.The vehicle name above is an example. Check the actual information on the product.Connecting Bluetooth DevicesConnects the Bluetooth devices that you add.Connecting Devices by Selecting Phone/CallPress the PHONE key or   key in the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.
Bluetooth Connection I 3-503Connecting Devices Through the Phone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection.  ▶ Select the name of the device to connect. ▶ Connect Bluetooth.Disconnecting Bluetooth DevicesDisconnects Bluetooth devices that are connected.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection.  ▶ Select the name of the device to disconnect.Deleting Bluetooth DevicesDeletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection.  ▶ Select Delete Devices.  ▶ Select the device name to delete. ▶ Select Delete.
3-6 I Bluetooth Bluetooth PhonePhone Status IconsShows the current phone status in the right top of the display.Icons DescriptionYou can use Bluetooth phones when a Bluetooth Hands-free connection is established.You can use Bluetooth audio features when a Bluetooth audio connection is estab-lished.You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.Call signal strength indicatorBattery level of the Bluetooth devices connectedDownloading Call History listDownloading ContactsIn a Bluetooth phone callMicrophone mutedi Information•  The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. •  The battery level may differ from the actual level remaining.
Bluetooth Phone I 3-703DialDials a call after the Bluetooth devices are connected.• Press the PHONE key or   key in the steering wheel control. •  You can also select All Menus icon, and then Phone  icon.Name Description  KeypadUse the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone   CallMakes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again. Settings Moves to a screen of Phone Settings. Delete Deletes the numbers that you entered.i Information•  Some types of mobile phones may not support the Speed Dial function.Accept/Reject CallIf there is an incoming call after you made a Bluetooth connection, a popup message will appear.Name Description Accept Answers the call. Reject  Ignores the call.i Information•  In some mobile phones, the caller's number may not be displayed, and the Reject feature may not be supported.
3-8 I Bluetooth Using the Menu During a Phone CallWhen making a call, you can use the fol-lowing menu items.Name Description Use PrivateSwitches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts  Displays the Contacts list.  Outgoing  VolumeDisplays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering ARS numbers. SwitchSwitches to a call on hold, if any. You can also switch calls by select-ing the number in the Information Display. The Switch function switches the current call to a wait-ing call in order to answer a new incoming call.i Information•  If the caller's number is listed in Contacts, the caller's name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed.•  In some Bluetooth devices, the Use Private feature may not be supported. •  In some Bluetooth devices, the Switch feature may not be supported.•  During a phone call on a Bluetooth Hands-free, you cannot access other modes, such as Radio and Settings. •  Depending on handset types, the in-call volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume.
Bluetooth Phone I 3-903Call HistoryPress the PHONE key, and then Call History.Name Description  All Lists the all call history.  Dialed Lists the calls that you made. Received  Lists the calls that you have received. Missed  Lists the calls you missed. Call HistoryDisplays all of your call history. Select from the list to dial the number. DownloadDownloads the call history information from your mobile phone.i Information•  In some mobile phones, call records may not be added to your Call History.•  Calls from restricted ID's are not added to your Call History Information.•  Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list.•  The durations of each dialed/received call are not displayed in your car's Call History list.•  While the call history download is in progress, the status bar displays an icon ( ).•  If the call history download is turned off on the Bluetooth device, the call history download will fail.•  Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.•  Some devices do not support call history download. Check if your Bluetooth device supports download feature. For details regarding Bluetooth-supported devices and their functional compatibility, visit http://www. kia.com
3-10 I Bluetooth ContactsPress the PHONE key, and then Contacts.Name Description Contacts ListThe list of Contacts. Select from the list to dial the number. Download  Downloads contacts from your mobile phone. Search Searches Contacts.i Information•  Up to 5000 phone numbers can be downloaded from a single, paired Bluetooth device.•  You cannot edit or delete downloaded phone numbers from your car.•  Contacts can be viewed only when the Bluetooth device is connected.•  Even if the Bluetooth device is disconnected, the downloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data)•  Downloaded phone numbers may be lost depending on the condition of the head unit. Keep your important data in a safe place.•  Contacts from both the SIM card and your mobile phone are downloaded at the same time by default.•  The status bar displays a ( ) while downloading contacts.•  The download will not be available if the contacts download function is turned off on your Bluetooth device.•  Some devices require a device authentication for downloading your contacts. If download fails, check your phone screen and confirm the download if necessary.•  Some devices do not support contacts download feature. Check if your Bluetooth device supports contacts download. For Bluetooth supporting devices details and compatibility, visit http://www.kia.com
Bluetooth Phone I 3-1103FavoritesPress the PHONE key, and then Favorites.Name Description FavoritesLists the phone num-bers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. Delete ItemsDeletes numbers that you select from Favorites. Delete All Deletes all of the num-bers from Favorites.
MEMO
The 911 Connect feature may not operate in the following situationsAbout UVO eServicesBefore using UVO eServices Connecting BluetoothPair a device from Bluetooth-enabled phoneConnecting to smartphone via USB911 ConnectRoadside AssistVehicle DiagnosticsMy Car ZoneParking MindereServices Guidepart.4 UVO eServices
4-2 I UVO eServicesUVO eServicesThe 911 Connect feature may not operate in the following situations When the vehicle ignition is not turned on. When the phone Bluetooth® feature is set to off. When the phone Bluetooth® cannot be connected or becomes disconnected. When there are no phones paired with the vehicle. When cellular service is unavailable. When the power turns off due to phone power (battery) issues. When a Bluetooth® device without phone feature support has been connected, such as an MP3 device. When the system is booting. When the system power supply is unstable. When the attempted call is blocked due to user operations. When the 9-1-1 call is unstable due to phone or other commu-nication network issues. When the call feature is not operating due to phone settings set by the user. When the phone cannot be controlled via Bluetooth® due to phone specifications or characteristics.
 Using UVO eServices and Precautions I 4-304 Using UVO eServices and Precautions Download the UVO eServices App and install it on your smartphone. The app can be downloaded from your smartphone’s app store. For using UVO eServices call features such as 911 Connect, Roadside Assist and eServices Guide, a smartphone must be connected with the vehicle via Bluetooth. Pair and connect your smartphone with the vehicle. For information on connecting your Bluetooth device, refer to the smartphone user’s manual and instructions on the Phone Help screen on your radio. Up to five Bluetooth devices can be paired to the vehicle and only one device can be connected at a time. For using data communication of Vehicle Diagnostics, Parking Minder, and My Car Zone, smartphone must be connected with the vehicle via USB cable.  ※  The use of genuine cable is recommended. (The use of other products may result in abnormal or non-proper operation.) Login and activate the UVO eServices App on your smartphone. Some UVO eServices features will only be available when your smartphone is connected with the vehicle via USB and the UVO eServices App is running. UVO eServices may not operate properly with incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com Communication between the vehicle and smartphone app may temporarily disconnect depending on the phone state. If the feature is not operating properly, you may need to reset the UVO eServices App or the smartphone and try again according to the following steps.1. Try feature again in the Head Unit2. Restart smartphone app3. Re-connect Bluetooth and USB cable4. Reset smartphone5. Delete Device and pair again Some services use the customer’s mobile phone data plan for data communication. Therefore, the features will function in accordance with the cellular plan. Use of the most up-to-date app version is recommended. For smartphone related inquiries, please visit MyUVO.com.
4-4 I UVO eServicesAbout UVO eServicesUVO eServices provides the following features through Bluetooth and/or USB connection to your smartphone.Name Connection Description  911 Connect BTIf an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.  Roadside Assist BT & USB If a diagnostic issue exists, you can connect with a Roadside Assist.  Vehicle Diagnostics USBInforms you if there is a diagnostic issue found in your vehicle. If an issue is found, you can contact a call center through Roadside Assist or reserve an appointment with your preferred Kia dealer through Schedule Service.  My Car  Zone USBKeeps track of predefined triggered alerts such as Speed Alert and Curfew Limit Alert from the My Car Zone feature.  Parking  Minder USBSaves the location of your parked vehicle on your UVO eServices smartphone app.You can check where your vehicle is parked through the UVO eServices App on your smartphone.  eServices Guide BT Receive guidance on how to use UVO eServices.i Information•  24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a connected mobile phone via Bluetooth within the cellular service coverage area is required.To use UVO eServices, the following conditions must be met.1. The UVO eServices smartphone app must be installed and you must log in using your MyUVO account credentials.2. The smartphone must be connected via Bluetooth and USB cable to the vehicle.3. Once this is complete, eServices must be activated.
Pair a device from Bluetooth-enabled phone I 4-504Before using UVO eServicesInstalling the UVO eServices App on your smartphone1. Download and install the UVO eSer-vices App on your smartphone.The app can be downloaded from theApple App Store or Google Play.2. Register your vehicle and account atMyUVO.comNote: MyUVO.com is accessible fromyour phone’s browser.3. Start the UVO eServices App on yoursmartphone and log in.Connecting BluetoothPress the   key on the steering wheel or press the PHONE key on the head unit. Press SETUP ▶ Bluetooth ▶ Bluetooth Connection.Pair a device from Bluetooth-enabled phone1. Turn on the Bluetooth feature on yoursmartphone’s Bluetooth settings screen.2.  Search Bluetooth devices on yoursmartphone.3.  Select the Vehicle Name on the phonethat matches the name shown on thescreen.4.  Verify the passkey shown on the touch-screen.If the phone supports SSP, check the passkey on your Bluetooth® device and confirm the authentication.
4-6 I UVO eServicesConnecting to smartphone via USB1. Connect your smartphone with the vehi-cle via USB cable. NOTICE•  For smartphone related inquiries, please visit MyUVO.com. Activating UVO eServicesPress the UVO key, then press the Vehicle Diagnostics or My Car Zone or Parking Minder button.Press the Yes button, then the UVO eServices activation process will begin. NOTICE•  Before activating UVO eServices, ensure your phone is connected to the vehicle via USB cable.
911 Connect I 4-704911 Connect911 ConnectIf an airbag deploys, your vehicle automat-ically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.The 911 Connect feature is available only when the mobile phone is connected via Bluetooth.By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agreeing to the 911 Connect terms of use.A ( ) icon is displayed at the top of the touch screen as shown below when phone is connected to UVO eServices system via Bluetooth and the 911 connect feature is turned on.Initiating a 911 CallIf an airbag deploys, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds.Once a call is connected with a 9-1-1 operator, it is possible to request emer-gency services to be dispatched to your location.
4-8 I UVO eServicesThe 9-1-1 operator may request informa-tion on the current location of your vehicle.When the 9-1-1 operator requests your vehicle location, “Sending Location” is displayed on the screen and the vehicle location is automatically sent to the 9-1-1 operator.When the 9-1-1 operator attempts to talk to the driver again, the call time is dis-played and allows the driver to speak with the 9-1-1 operator.Roadside AssistRoadside AssistIf there is any issues in the vehicle, you can connect with a Roadside Assist agent. The Roadside Assist feature can be used only when your phone is connected via Bluetooth.Press the UVO key ▶ Roadside Assist.
Vehicle Diagnostics I 4-904Vehicle DiagnosticsConducting Vehicle DiagnosticsVehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked.It also requires that UVO eServices is activated, and the Phone is connected via USB cable before starting Vehicle Diagnostics.Press the UVO key ▶ Vehicle Diagnostics.The Vehicle Diagnostics process will begin.When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the Cancel button on the touch screen or any hardkey.If diagnostic issues are found, press the Send Report button to send to your MyUVO account or press the Schedule Service but-ton to schedule an appointment with your preferred or nearby Kia dealer.
4-10 I UVO eServicesSchedule ServiceWhen scheduling an appointment using the Schedule Service button, pressing the Preferred button will allow you to request an appointment with your preferred Kia dealer and send your vehicle’s diagnostics infor-mation.Pressing the Nearest button will allow you to request an appointment with the near-est Kia dealer and send your vehicle’s diagnostics information.Press the Preferred or Nearest button.Request an appointment with Preferred or Nearest Kia Dealer and send your vehi-cle’s diagnostics data.Send ReportPress the Send Report in the vehicle diag-nostics result screen. Vehicle Diagnostics Data is transmitted to your account and you can see the report on MyUVO.com
Vehicle Diagnostics I 4-1104Even if diagnostic issues are not found after Vehicle Diagnostics, it is recom-mended that you send the diagnostic results to your MyUVO account.Press the Send Report button to send the diagnostics results to your MyUVO account.Scheduled DiagnosticsIf you have set up Scheduled Diagnostics on your UVO eServices App, a vehicle diagnostics check will automatically start on the day you selected.On the date of the Scheduled Diagnostics, the following window will be displayed.Press the Yes button on the touch screen to proceed with diagnostics.Press the Send Report button to see the Vehicle Health Report on MyUVO.com.
4-12 I UVO eServicesAutomatic DiagnosticsIf a critical diagnostics issue with your vehicle’s powertrain is detected, Automatic Diagnostics will be notified. NOTICE•  The screen messages differ based on the vehicle diagnostics severity. Ensure your phone is connected to the system via USB cable before using Schedule Service and Send Report.My Car ZoneMy Car Zone is a feature that provides alerts and driving history for Curfew Limit Alerts and Speed Alerts set by the user.Name DescriptionCurfew Limit AlertCurfew Limit Alerts are alerts that are triggered when a driver is driving within a predefined time range.Speed AlertSpeed Alerts are alerts that are triggered when a driver exceeds the predefined maximum speed.My Car Zone features are supported only when UVO eServices has been activated.Press the UVO key ▶ My Car ZoneCurfew Limit Alerts HistorySpeed Alerts History
My Car Zone I 4-1304Curfew Limit AlertSpeed AlertCurfew Limit AlertYou can check the Curfew Limit Alert his-tory for a list of past triggered curfew alerts.Name Description PhoneName of phone con-nected upon triggered curfew limit Alert Time Initial alert time DurationTotal duration of driving while curfew limit was triggered Driving TimeTotal driving time from turning ignition on until turning ignition offSpeed AlertYou can check the Speed Alert history for triggered speed limit alerts of the vehicle.Name Description PhoneName of phone con-nected upon triggered speed limit alert Max. SpeedMaximum vehicle speed upon triggered speed limit alert Alert TimeTime from first triggered alert until last triggered alert  DurationTotal triggered alert time from turning ignition on to turning ignition off
4-14 I UVO eServicesTo check My Car Zone alert history from your smartphone, you must first send the alert history to your MyUVO account.Parking MinderSending Parking LocationThe location where your vehicle is currently parked can be sent to your smartphone.Ensure that your smartphone is connected via USB and the UVO eServices App is running before using this feature.After parking the vehicle, press the UVO key ▶ Parking Minder to send the vehicle’s location to your smartphone.Once the parking location has been sent, you can view your vehicle’s location from the UVO eServices App on your smart-phone. NOTICE•  When the parking location is being sent, do not drive the vehicle. Ensure that you have logged into the UVO eServices App, and your phone is connected to the multimedia system via USB cable.•  When ignition is turned off while the phone is connected via USB, Parking Minder can be transferred automatically if the option is set up in UVO eService Settings
eServices Guide I 4-1504eServices GuideeServices GuideeServices Guide provides guidance on how to use UVO eServices.This feature is only available when the mobile phone is connected via Bluetooth.Press the UVO key ▶ eServices Guide UVO eServices SettingsRefer to SETUP key ▶ UVO eServices.
MEMO
Basic FeaturesMenuDestination SearchRoute SearchNavigation SettingsTroubleshootingpart.5 Navigation06K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-1K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-1 2016-11-04   오후 3:02:152016-11-04   오후 3:02:1
6-2 I NavigationNavigationBasic FeaturesOperating Navigation ScreenBasic features on the map screen. Name DescriptionMove to Places Menu.Go to the Home screen.Change the map view mode.Adjusts the volume.Zoom in the map.Set the zoom level automatically according to the guidance.Zoom out the map. Quick and easy selection of a destination and options.NaviMenuEnter the navigation menu screen.Touch to scroll the map.Set asDestinationQuick and easy selection of a destination from the map screen.AddWaypointSet a waypoint to the current route.SaveSave frequently used address to address book.POIFind a POI(Point Of Interest) around the current position.View the vehicle’s current position on the map screen.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-2K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-2 2016-11-04   오후 3:02:162016-11-04   오후 3:02:1
Basic Features I 6-306PlacesYou can use this menu when the gear is in “Parking” mode and there is no destination set. Press the Search screen to move to “Places”. Please refer to “Places” in “Destination Search” for more details. Changing Map ViewTouch the compass arrow icon to toggle between a map oriented to the North, ori-ented parallel to the vehicle’s heading and 3D View.Navigation Volume Press the   button to adjust the naviga-tion volume.Name Description Set the volume to mute. Turn the volume down. Turn the volume up. Slide to set the volume. Sets the volume of voice guid-ance louder than that of audio. K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-3K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-3 2016-11-04   오후 3:02:332016-11-04   오후 3:02:3
6-4 I NavigationZoom In/Zoom OutZoom the map view screen in and out.  Press   or   to set the zoom level.Map ScaleSets the zoom level automatically accord-ing to the type of road.Name Description Scale Fix Manually adjust the map scale.  Auto Scale Change the map scale automatically depending on the type of road.MenuRoutePress   button on the bottom left of the screen ▶ Press Route button.Select the Route button to set Reroute, Route Options or Detour.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-4K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-4 2016-11-04   오후 3:02:392016-11-04   오후 3:02:3
Menu I 6-506RerouteThe Reroute button is active only when there is an active route.You can search a route again.Route OptionsYou can select an option from Route, Traffic Information, Freeway, Toll Roads, Ferry, HOV/Carpool Lanes, Electronic Toll or Private/Gated Roads. Press Save to save your selection. If there is a route already saved, another route will be searched. DetourThe Detour button is active only when there is an active route.Selected distance is detoured from the current location. K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-5K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-5 2016-11-04   오후 3:02:412016-11-04   오후 3:02:4
6-6 I NavigationMap DisplayDisplays the direction of the map.Press  ,   or  .Name Description    North  Up (2D)Displays always has north at the top of screen.   Heading  Up (2D) Displays always shows the vehicle’s direction as proceeding towards the top of the screen.   3D Shows the map in  3 dimentions. 3D BuildingsShows or hides build-ings on the map.POISelect the   button on the bottom left of the screen ▶ Select the POI button.View Nearby POIsPress On, Off button to set whether to show nearby POIs or not. When catego-ries are selected, they will appear on the map. (ex. Gas Stations)The lists of nearby gas stations are dis-played. The list can be sorted to display in order of distance or name.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-6K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-6 2016-11-04   오후 3:02:432016-11-04   오후 3:02:4
Menu I 6-706Name Description Call to the selected location (Phone needs to be connected via Bluetooth).  Set asDestinationSet the place as a des-tination. AddWaypointSet the location as a waypoint. SaveSave the location. POISearch nearby POIs.EditChange the shortcut POIs to display (ex. Gas Stations)Select the desired category to change. (ex Restaurants) Select new category to display (ex. American)Gas Stations is changed to American.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-7K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-7 2016-11-04   오후 3:02:492016-11-04   오후 3:02:4
6-8 I NavigationPOI CategoriesSelect the item to search.Press the History button to check the pre-vious search result.Press the Search button to search the POI category by name.Select the desired POI to check the loca-tion and for detailed information. Name Description Search POI around the current position. Search POI around the destina-tion.   Active only when a route’s planned. Search POI along route.   Active only when a route’s planned. Search POI around the current cursor when the map scrolled.   Active only when the cursor  position is different from the vehicle position. Search POI around the city selected.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-8K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-8 2016-11-04   오후 3:02:542016-11-04   오후 3:02:5
Menu I 6-906Traf fi cPress the   button on the bottom left of the screen ▶ Select the Traffic button.Traffi c ListOn the traffic list, the current traffic/road event information is displayed in order of distance. Name Description Direction from the current location. Distance from the current loca-tion (mi or km). Displays traffic info symbol based on the type of event. Description of traffic event. Additional traffic information may be dis-played upon clicking on the Category button.Name DescriptionDisplay ‘Road Construction’ infor-mation.Display ‘Accident’ information.Display ‘Slow Traffic’ information.Display ‘Incident’ information.Display ‘Hazardous Road Conditions’ information.Display ‘Travel Information’.When   On Route is activated, only traffic information on your route is displayed. K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-9K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-9 2016-11-04   오후 3:02:592016-11-04   오후 3:02:5
6-10 I NavigationOn the traffic list, the current basic traf-fic/road event information is displayed in order of distance.Select the combo box to change the arrangement in order of Category/Distance.Name Description Select the combo box to arrange. Arrangement by category: Display traffic information arranged in order of traffic information event type. Arrangement by distance: Display the traffic information in order of distance closer to the current location.Traffi c detailSelect the traffic information on the traffic list to display the detailed screen as shown in the screen.Display the symbol of traffic event and arrow which indicates the road from start to end of the traffic event. Detailed infor-mation is available on the right screen. Name DescriptionSymbol of traffic event.Event name of traffic information. Road name/road number includ-ing direction. Direction and distance from the current location. Intersection where traffic event starts.Intersection where traffic event ends. Total distance of traffic event.Estimated delay time. Check the previous traffic infor-mation.Check the next traffic information. Detour the route based on the traffic information.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-10K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-10 2016-11-04   오후 3:03:092016-11-04   오후 3:03:0
Menu I 6-1106Traffi c detourIf there is traffic information on the route, it is possible to detour the route using traffic information and search other routes.When the Detour button is enabled in the View Traffic Detail, press the Detour button to detour. on.Select the desired section..Check the information and press the Detour button.Press the Start Guidance button to apply the detoured sections and search other routes.K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-11K_DE 16_G4.0[USA_EU]AVN_PART6.indd   6-11 2016-11-04   오후 3:03:152016-11-04   오후 3:03:1

Navigation menu