HYUNDAI MOBIS ADC30C6AN DIGITAL CAR AVN SYSTEM User Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	3405452
Application ID	S636HK0zEpuAKK84JewCYg==
Document Description	User Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	233.96kB (2924458 bits)
Date Submitted	2017-05-26 00:00:00
Date Available	2017-11-22 00:00:00
Creation Date	2017-05-17 13:00:18
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2017-05-17 13:00:22
Document Title	User Manual Part 1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	FEEL-6

CAR MULTIMEDIA SYSTEM
USER'S MANUAL
Read the following safety precautions
for your safety
Before using the product, read the contents of this user's manual
carefully and use this product safely.
Notations used within this User's Manual
WARNING
• Failure to observe the instructions within this category could result in death
or serious injury or damage to the vehicle.
CAUTION
※ The design and specifications of this product may change without prior
• Information on matters that could potentially lead to injury or vehicle
damage/malfunction Information that could lead to higher user safety
notification for product and service improvement.
The actual features in the vehicle may differ from the illustrations.
For more accurate information about the vehicle, please refer to the
catalogue.
i Information
• Information and tips that provide additional user convenience in using the
product
※ This Audio system contains open source software, including without
limitation, software distributed and/or modified under the GNU General
Public license, Version 2, June 1991, and the GNU lesser General Public
License, Version 2.1, February 1999.
For additional information and to obtain related materials including
without limitation, the previous referred to licenses and software, please
contact us at MOBIS_OSSrequest@mobis.co.kr
NOTICE
• Information on specific features that facilitate proper product use and
functional understanding
• Information on terminology used within this manual
iPod
®
Wi-Fi®
iPod® is a registered trademark of Apple Inc.
®
Bluetooth Wireless Technology
A compatible Bluetooth ® Wireless Technology-enabled cell phone is
required to use Bluetooth ® Wireless Technology.
The Bluetooth ® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Kia is under license.
Other trademarks and trade names are those of their respective owners.
A Bluetooth® enabled cell phone is required to use Bluetooth ® Wireless
Technology.
Bluetooth ® Wireless Technology phone compatibility can be checked by
visiting http://www.kia.com.
The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance.
part.1
Basic
Warnings and Cautions
Key Product Features
Component Names and Functions
Starting the System for the First Time
Basic
Safety Warnings
• Please refrain from use if the screen
• Some functions other than the one
is blank or no sound can be heard as
mentioned above cannot be used while
• Do not stare at the screen while driving.
these signs may indicate product mal-
driving. These functions operate only
Staring at the screen for prolonged peri-
function. Continued use in such con-
when the vehicle is parked.
ods of time could lead to traffic accidents.
ditions could lead to accidents (fires,
• Do not disassemble, assemble, or modify
the Multimedia system. Such acts could
result in accidents, fire, or electric shock.
• Heed caution not to spill water or intro-
electric shock) or product malfunctions.
• Do not touch the antenna during thunder or lightening as such acts may lead
to lightning induced electric shock.
duce foreign objects into the device.
• Do not stop or park in parking-restricted
Such acts could lead to smoke, fire, or
areas to operate the product. Such acts
product malfunction.
could lead to traffic accidents.
• If you use phone related functions while
• For most Audio and multimedia modes,
driving, you will find it difficult to concen-
the display will not operate when the
trate on operating the vehicle and the
vehicle is in motion. For your safety, first
current traffic conditions, so the possibility
park the vehicle to watch or view the
of an accident may increase. Please
screen.(The screen will only operate
use phone related functions only when
when the parking brake is ON for man-
parked.
ual transmission vehicles and when the
parking brake is ON or the gearshift is in
the P (PARK) position for automatic.)
1-2 I Basic
Safety Cautions
• Pay attention to the volume setting when
• Do not subject the device to severe
turning the device on. A sudden output
shock or impact. Direct pressure onto
Pay attention to traffic conditions while
of extreme volume upon turning the
the front side of the monitor may cause
driving.
device on could lead to hearing impair-
damage to the LCD or touch screen.
• Operating the device while driving could
ment. (Adjust the volume to a suitable
• When cleaning the device, make sure
lead to accidents due to a lack of atten-
levels before turning off the device.)
to turn off the device and use a dry and
tion to external surroundings. First park
• If you want to change the position of
smooth cloth. Never use tough materi-
the vehicle before operating the device.
device installation, please inquire with
als, chemical cloths, or solvents(alcohol,
In addition, the touch screen may not
your place of purchase or service main-
benzene, thinners, etc.) as such mate-
work for some functions when the vehi-
tenance center. Technical expertise is
rials may damage the device panel or
cle is in motion. The touch screen fea-
required to install or disassemble the
cause color/quality deterioration. When
ture will be supported once the vehicle
device.
experiencing product concerns, inquire
has stopped.
• Turn on the car ignition before using this
with your place of purchase or service
• Adjust the volume to levels that allow
device. Do not operate the Multimedia
the driver to hear sounds from outside
system for long periods of time with the
• Prevent caustic solutions such as per-
of the vehicle. Driving in a state where
ignition turned off as such operations
fume and cosmetic oil from contacting
may lead to battery discharge.
the dashboard because they may cause
lead to accidents.
• Upon using the Multimedia system
damage or discoloration.
for more than 10 minutes with the car
engine turned off, the following warning
will be displayed. After 10 minutes, the
01
external sounds cannot be heard may
maintenance center.
warning will be displayed for 5 seconds
every 1 minute.
Warnings and Cautions I 1-3
Key Product Features
This device is a Multimedia system equipped with a multifunctional player that supports Radio (FM, AM), SiriusXM™, USB,
iPod, AUX, Bluetooth Audio and My Music features. The WIDE
VGA LCD provides a high quality resolution while the powerful
and rich sound system adds to the driving enjoyment.
Display
Wide TFT-LCD Display
• Provides high quality video through a Wide
TFT-LCD Display using an LED Back Light.
• Touch screen for maximum user convenience.
Radio
Digital Tuner Feature
• Digital Tuner using PLL method that supports
memory of 40 broadcast stations.
Radio broadcast station name
• Displays broadcast station names.
Multimedia
Player
Support for various Media Formats
• Support for various media formats, including
®
Radio, USB, iPod, AUX and Bluetooth Audio
Streaming modes
My Music
• Supports copying of music stored within USB
devices into My Music (internal memory) mode
1-4 I Basic
Miscellaneous
Bluetooth® Wireless Technology
®
• Convenient use of Bluetooth Handsfree by
using buttons within the steering wheel control
Digital Screen Control Features
• Easy control of features through touch screen
options
Steering Wheel Control
• Control over audio features, voice recognition
®
and Bluetooth through the steering wheel
control for maximum convenience
Component Names and Functions
Name
PHONE
APPS/
Name
RADIO
Description
Selects FM/AM/SiriusXM™ mode
• Each time this is pressed, the mode is changed
in the following order: FM → AM → SiriusXM™
→ FM.
MEDIA
Selects MEDIA mode.
• If the media is not connected MEDIA mode will
not be activated.
SEEK
TRACK
When pressed quickly (less than 0.8 seconds),
• FM/AM mode: Plays the previous/next frequency.
• SiriusXM™ mode: Changes the channel.
• MEDIA (USB/iPod/My Music) mode: Changes
the track, file or title (except for USB Image and
AUX).
When pressed and held down (more than 0.8 seconds),
• FM/AM mode: Continuously changes the frequency until the key is released.
• MEDIA (USB/iPod/My Music) mode: Rewinds
or fast forwards the track or file (except for USB
Image, Bluetooth Audio, and AUX).
POWER/
VOL
• When power is off, press to turn power on.
• When power is on, press and hold (more than
0.8 seconds) to turn the power off.
• When power is on, press quickly (less than 0.8
seconds) to turn Audio off.
• Turn left/right to adjust the volume.
UVO
SETUP
TUNE
RESET
Displays the Bluetooth phone mode.
Moves to the Apps/Info screen.
Moves to the UVO mode
Moves to the Setup screen.
• FM/AM mode: Changes the frequency.
• SiriusXM™ mode: Changes the channel.
• MEDIA (USB/iPod/My Music) mode: Changes
the track, file or title (except USB Image,
Bluetooth Audio, and AUX).
Resets the system settings. (Preset radio channels
and other data will not be deleted)
※ The actual feature in the vehicle may differ from the illustration.
01
Head Unit
Description
Component Names and Functions I 1-5
Steering Wheel Controls
Description
When pressed quickly (less than 0.8 seconds),
• Activates voice recognition.
When pressed and held (more than 0.8 seconds),
• Ends voice recognition.
• If iOS device is connected through Bluetooth,
activates or ends Siri Eyes Free.
MODE
VOL +
VOL -
• Each time this is pressed, the mode is changed in
the following order: FM → AM → SiriusXM → USB
or iPod → AUX → Bluetooth Audio → My Music →
→ FM
• If the media is not connected, the corresponding
modes will be disabled
• Press and hold (more than 0.8 seconds) to turn
the Audio system on/off
• When power is off, press button to turn power
back on
Controls the volume
When pressed quickly (less than 0.8 seconds),
• FM/AM mode: searches broadcast frequencies
saved to Presets
• SiriusXM™ mode: searches broadcast channels
saved to Presets
• MEDIA (USB/iPod/My Music) mode: changes the
track, file or title (except USB Image, AUX)
When pressed and held (more than 0.8 seconds),
• FM/AM mode: automatically searches broadcast
frequencies
• SiriusXM™ mode: automatically searches broadcast channels
• MEDIA (USB/iPod/My Music) mode: quickly
looks up songs (excluding USB images, AUX and
Bluetooth audio files)
Name
Description
When pressed quickly (less than 0.8 seconds),
• When pressed in the dial screen, makes a call
• When pressed in the incoming call screen,
answers the call
• When pressed during call waiting, switches to
waiting call (Call Waiting)
When pressed and held (more than 0.8 seconds),
• When pressed in Bluetooth® Hands-free, redials
the last dialed call
• When pressed during a Bluetooth® Hands-free
call, switches call back to mobile phone (Private)
• When pressed while calling on the mobile phone,
switches call back to Bluetooth ® Hands-free
(operates only when Bluetooth® Hands-free is
connected)
• When pressed during a call, ends the phone call
• When pressed in the incoming call screen, rejects
the call
※ The actual feature in the vehicle may differ from the illustration.
01
Name
Component Names and Functions I 1-7
Starting the System for
the First Time
Turning the System On/Off
NOTICE
• You cannot operate the system while it is
booting up. It may take some time for all of
features of the system, particularly the voice
recognition system, to be ready for use.
Press the engine start button or set the
ignition key to On or ACC. Each time you
Pressing and holding the power key on the
turn on the system, a boot logo and safety
head unit will turn off the system.
warning will appear.
You can change Screen Saver Settings
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET key for a second or longer. (It is recommended that you
press the RESET key using a tool, such as
a pin or a clip.)
in Setup to display a clock on the Screen
Saver.
i Information
• If you turn off the system during a phone call
using the Hands-free feature, then the call will
automatically switch to your mobile phone.
will display the safety guide. To change the
system language between English,
French, Spanish and Korean, select the
Language button.
NOTICE
• Check the volume when turning on the
system. Before turning on the system, adjust
the volume to a reasonable level.
01
Pressing the power key on the head unit
Starting the System for the First Time I 1-9
Battery Warning Message
Always use the system while the car
Restrictions on Features for
Safety Measures
engine is running. If you turn on the sys-
Several features are limited while driving.
tem while the engine is off, a battery warn-
The restriction screen will disappear when
ing message will appear. When the engine
shifting gears into P or putting the parking
starts, the message will disappear.
brake on.
WARNING
- Blank Screen
• Refrain from use if the screen is blank or
no sound can be heard as these signs may
indicate product malfunction. Continued use in
such conditions could lead to accidents (fires,
electric shock).
NOTICE
• If you use the system for a long time with
the engine off, the battery may become
completely discharged.
1-10 I Basic
WARNING
- Touching the Antenna During A
Thunder Storm
• Do not touch the antenna during thunder or
lightning as such acts may lead to lightning
induced electric shock.
Home Screen
Information Display on the Status Bar
Controls Menu Configuration for the Home Screen
Displays the date and time, along with the system status shown by
Tap the
the various icons to the right of the clock.
icon on any screen to display the Home Screen below.
The icons in the following table indicate the various types of system status details and events.
Icon
Description
Displayed when the audio is muted.
Displays the remaining battery of the Bluetooth phone.
Displayed when connected to Bluetooth for handsfree.
Displayed when connected to Bluetooth for streaming audio.
Displayed when connected to Bluetooth for streaming audio and handsfree.
Displayed when downloading contacts or recent calls from the Bluetooth phone.
Description
Radio/
Media Widget
• Shows brief information on the radio or
media that is now playing.
• Tap the area to move to the mode that
you are listening to.
Connectivity
Widget
Shows any connected devices such as iPod,
and Bluetooth.
All Menus
Shows all of the items in the system menu.
My Menu
• You can add up to eight menus here.
• Add your favorite menus to have quick
and easy access to them.
Apps/Info
Moves to the Apps/Info screen.
Setup
Moves to the Setup screen.
Displayed while on a call with the Bluetooth phone.
Displayed when the microphone of the Bluetooth is muted.
Displays the signal strength of the Bluetooth phone.
Displayed when connected to Wi-Fi.
Displayed when connecting to Wi-Fi.
Displayed when 911 connect is available.
01
Features
Starting the System for the First Time I 1-11
On-Screen Touch Controls
Adding Your Favorite Menu Items to My
Menu
Learn how to touch the screen to operate
Select a menu or item you want, then drag
From the Home screen, select
the system.
and drop it to where you want to place it.
icon, and then
Edit
My Menu
Drag & Drop
From the Edit My Menu screen, select
Select
menu items from the list on the right, then
Tap lightly on a menu or an item to select it.
drag and drop them to a desired place on
the left.
To remove the item from My Menu, drag
item from the left and drop them on the right.
NOTICE
• The system will not recognize your touch if
you wear a glove or other non-conductive
material. Touch the screen using your finger,
an electrostatic touch-screen glove, or a stylus
pen.
Drag or touch the slider along the play bar
in the music screens to jump to the point
that you want to play from.
i Information
• Up to eight items can be added to My Menu.
1-12 I Basic
Flick (Quick Scrolling)
Drag the frequency bar to the left or right
You can view the previous or next image
to move to the frequency that you want.
by flicking left/right on an image on the
Quickly moves up and down in the list.
USB Image screen.
NOTICE
• Moving the list when there are many items will
display a handler on the right of the display.
You can easily move many items at a time
with the handler.
drop icons to add, delete, or move to/from
Flick left/right on the frequency bar in the
My Menu.
radio player to look up the previous/next
frequency available.
Starting the System for the First Time I 1-13
01
From the Edit My Menu screen, drag and
Press and Hold
Pressing the
and
buttons
in the music player will fast forward/rewind
the music.
1-14 I Basic
part.2
Radio/Media
FM/AM (with HD Radio™)
HD Radio™ Technology (if equipped)
FM/AM
SiriusXM™
USB
iPod
AUX
Bluetooth® Audio
My Music
Radio/Media
FM/AM (with HD RadioTM)
You can access the radio player either by pressing the
Features
Description
Preset
Frequencies
• The stored preset frequencies are displayed
for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
• Flick the preset frequencies up/down to scroll
quickly through presets.
Frequency Bar
• Flick the frequency bar left/right to search for
available radio channels to the left or right of
the current channel.
• Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want.
Frequency
Displays the current frequency.
Tag
Saves the current music’s tag information to the
head unit. If connected to iPod, the tag information can be saved on the device.
Presets
Shows the stored presets for user selection.
Menu
• List
Moves to the frequency list.
• Info
Turns the Radio text information transmitted
from the broadcasting station on and off.
• Preset Scan
Plays preset frequencies for 10 seconds per
item.
• Sound Settings
Moves to the Sound Settings.
RADIO
key or by selecting the Radio menu from All Menus on the Home
screen.
FM/AM Mode Display Controls
i Information
• If you press the RADIO key when power is off, the power will turn on
and a radio broadcast will be tuned from the current mode.
• If you are in radio mode, select the media widget from the Home screen
to access the radio player.
2-2 I Radio/Media
Description
Scan/Preset
Scan
Displays an active mode from Scan and Preset
Scan modes.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
HD Radio
(if equipped)
Used to set whether to turn HD Radio™ reception On or Off.
Scan
Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per
item.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Seeks the previous/next frequency.
• When pressed and held (more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the
button, the system seeks the next available
frequency.
TUNE
TUNE knob to manually seek availTurn the
able frequencies.
• FM: Increment/decrement by 200 kHz
• AM: Increment/decrement by 10 kHz
02
Features
FM/AM (with HD Radio™) I 2-3
HD Radio™ Technology (if equipped)
If an HD Radio™ broadcast is received,
the radio mode will switch from analog
Program Service Data:
broadcast to HD Radio™ broadcast.
Contributes to the superior user experience of HD
Radio™ Technology. Presents song name, artist, station IDs, HD2/HD3
Channel Guide, and other relevant data streams.
Adjacent traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.
Digital, CD-quality sound. HD Radio™ Technology
enables local radio stations to broadcast a clean digital
signal. AM sounds like today’s FM and FM sounds like a CD.
2-4 I Radio/Media
i Information
• The HD Radio™ screen is displayed only
when a HD Radio™ broadcast is being
received.
Name
Description
HD Radio™
Reception &
Channel buttons
Displays main HD Radio™ channels and
used to directly select the current available
channels.
The HD Radio™ related icon display
becomes active within regions where an
HD Radio™ signal can be received.
HD Channel
Number
Analog station and corresponding HD
Radio™ channel number saved in the preset list.
HD Broadcast
Info
Displays detailed information about the current broadcast (the details of the information
shown are different depending on whether
the Info button is selected)
HD Radio
When the HD Radio™ soft button is ON
(the red indicator on the HD Radio™ button
is illuminated), HD Radio™ signals will be
received.
02
HD Radio™ Mode Display Controls
HD Radio™ Technology (if equipped) I 2-5
FM/AM
You can access the radio player either by pressing the
Features
Description
Preset
Frequencies
• The stored preset frequencies are displayed
for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
• Flick the preset frequencies up/down to scroll
quickly through presets.
Frequency Bar
• Flick the frequency bar left/right to search for
available radio channels to the left or right of
the current channel.
• Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want.
Frequency
Displays the current frequency.
Presets
Shows the stored presets for user selection.
Menu
• List
Moves to the frequency list.
• Preset Scan
Plays preset frequencies for 10 seconds per
item.
• Sound Settings
Moves to the Sound Settings.
RADIO
key or by selecting the Radio menu from All Menus on the Home
screen.
FM/AM Mode Display Controls
i Information
• If you press the RADIO key when power is off, the power will turn on
and a radio broadcast will be tuned from the current mode.
• If you are in radio mode, select the media widget from the Home screen
to access the radio player.
2-6 I Radio/Media
Description
Scan/
Preset Scan
Displays an active mode from Scan and Preset
Scan modes.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
Info
Turns the Radio text information transmitted
from the broadcasting station on and off.
Scan
Shortly plays the broadcasts for the frequencies
with superior reception for 5 seconds per item.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Seeks the previous/next frequency.
• When pressed and held (more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the
button, the system seeks the next available
frequency.
TUNE
TUNE knob to manually seek availTurn the
able frequencies.
• FM: Increment/decrement by 200 kHz
• AM: Increment/decrement by 10 kHz
02
Features
FM/AM I 2-7
SiriusXM™
You can access the radio player either by pressing the
Features
RADIO
key or by selecting the Radio menu option from All Menus on the
Preset
Frequencies
• Shows the stored presets for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
Channel Logo
Displays the current channel logo.
Channel Info
Displays the current channel number and
name.
Content Info
Displays the artist, title and other information
about the current playing song.
Category Info
Displays the category of the currently playing
song.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
Direct Tune
Used to search for the desired channel by
entering the channel number.
Scan
Plays all receivable channels for 10 seconds
per item.
Category Lock
If pressed, only the channels for the current
category can be searched or scanned.
Category
Selection Buttons
Used to select the previous/next category.
Play Live
Switches to the live broadcast mode.
Skip Backward
Repeats the previously broadcasted program.
• Holding for less than 0.8 seconds: Moves to
the previous segment.
• Holding for more than 0.8 seconds: Moves
to the previous 5 seconds.
Home screen. Select the SiriusXM™ band from the radio player.
SiriusXM™ Mode Display Controls
i Information
• If you press the RADIO key when the power is off, the power will turn
on and a radio broadcast will be tuned from the current mode.
• If you are in the SiriusXM™ mode, select the SiriusXM™ radio widget
from the Home screen to access the radio player.
• When the power is off, pressing the RADIO key will turn the power on
and play a SiriusXM™ Radio broadcast.
2-8 I Radio/Media
Description
Description
Play/Pause
Pauses/plays the current broadcasting program.
Skip Forward
Moves to the next segment.
Tag
Saves the current music’s tag information to the
head unit. If connected to iPod, the tag information can be saved on the device.
Presets
Shows the stored presets for user selection.
List
Moves to the channel list.
Menu
• What is on My Presets?
The program schedule saved in my preset. (For
more details, see Section 3.10. Viewing Menu.)
• Featured Favorites
Theme channels recommended by SiriusXM™.
(For more details, see Section 3.10. Viewing
Menu.)
• Preset Scan
Plays preset channels for 10 seconds each.
• Sound Settings
Moves to the Sound Settings.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Plays the previous/next channel.
• When pressed and held (more than 0.8 seconds): Continuously changes the channel
until the key is released and plays the current
channel.
TUNE
Changes the channel.
02
Features
SiriusXM™ I 2-9
Selecting through
Channel/Category List
Select the
List
▶ Select the desired cat-
egory and channel.
If you select the
Skip
scan channels using the
key or the
button, you can
SEEK
TRACK
TUNE knob by skipping the
channels that you chose to skip.
Viewing Menu
Using the
Menu
button on the right, you
can view the program schedule and information about the Featured Favorites provided by SiriusXM™.
Direct Tune
Enter the number of the channel you want
to receive.
Select the desired category and the channel. Once selected, the previous screen
will be restored and the selected channel
will begin playing.
2-10 I Radio/Media
What is on My Presets? (Program Schedule)
Name
Description
By selecting this option, you can select a broadcasting date.
Broadcast information will be provided for one
week from the current date.
Change
Broadcast
Date
Shows saved presets for user selection
A total of 40 frequencies for SiriusXM™ modes
can be displayed.
Program
Information
Shows you the program titles to be broadcasted
at the time that you have chosen.
Select a program to see more details.
If there is more information on the program you
selected, an arrow button will be displayed on
the right of the list. You can see more program
information by selecting the arrow button.
You can select Menu to see program information and the schedules of broadcast channels listed in the presets.
02
Preset
SiriusXM™ I 2-11
Featured Favorites
Featured Favor ites feature allows
SiriusXM™ to broadcast additional presets.
• Example 1: “Martha’s Favorites” may
represent Martha Stuart’s favorites presets on her radio.
• Example 2: During holidays, “Holiday
Music” may represent all the SiriusXM™
channels that are playing the holiday
music for easy access by users.
Multiple sets Featured Favorites data
can be broadcast by SiriusXM™ and can
change from time to time.
2-12 I Radio/Media
USB
• Take caution so that the USB connector does not come in contact with body parts or objects.
Before Playing a USB MP3
• Repeated connecting/disconnecting of USB devices within short
periods of time may result in product malfunction.
Connect the USB device after turning on the engine. The USB
device may become damaged if it is already connected when the
ignition is turned on.
• Make sure to connect/disconnect external USB devices with the
audio power turned off.
• The amount of time required to recognize the external USB
device may differ depending on the type, size, or file formats
played.
• For MP3/WMA/OGG files, only music files with compression
rates between 8Kbps ~ 320Kbps can be played.
• Heed caution to static electricity when connecting/disconnecting
external USB devices.
• Encoded MP3 Players will not be recognized when connected
as an external device.
• When connecting an external USB device, the device may not
properly recognize the USB is in some states.
• Only products formatted with byte/sectors under 64Kbyte will be
recognized.
• USB devices, formatted to the FAT12, FAT16, or FAT32 file system, are recommended. File systems other than FAT12, FAT16,
stored on the USB.
• The use of USB devices for purposes other than playing music
and image files is prohibited.
• Do not use the USB I/F to charge batteries or USB accessories
that generate heat. Such acts may lead to worsened performance or damage to the device.
• The device may not recognize the USB device if separately
purchased USB hubs and extension cables are being used.
Connect the USB directly with the multimedia terminal of the
vehicle.
• When using mass storage USB devices with separate logical
drives, only files saved to the root drive can be played.
• When application programs are installed to specific USBs, files
may not properly play.
FAT32, exFAT, and NTFS are not supported.
• Some USB devices may not be supported due to compatibility
issues.
USB I 2-13
02
• Files that are not standard format music/image files will not be
• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB
devices not recognized as portable disk drives) are connected
Plug Type Connector
with the device.
• Charging through the USB may not work for some mobile
devices.
• The device may not support normal operation when using a
Product Name
Manufacturer
XTICK
LG
BMK
BMK Technology
SKY-DRV
Sky Digital
TRANSCEND JetFlash
Transcend
• When playing iPods, please use a dedicated iPod car cable.
Sandisk Cruzer
SanDisk
• Normal operation cannot be guaranteed when other cables are
Micro ZyRUS
ZyRUS
NEXTIK
Digiworks
USB memory type besides Metal Cover Type USB Memory.
• The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory.
being used.
• The device will not support files locked by DRM (Digital Rights
Management).
• USB memory sticks used by connecting an Adaptor (SD Type or
CF Type) may not be properly recognized.
• Only use Plug type connector products, as shown in the figure
below.
• To play USB MP3, the USB device must be connected to the
USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
2-14 I Radio/Media
i Information
• Problems that occur through use of USB devices not listed within the
above table are not covered by the product warranty.
Supported USB MP3 music specifications
Name
MP3 File
Specification
Recommended
Bit Rates and
Sampling
Frequency
Description
Supported Image Specifications
Name
Description
Specification: MPEG1 AUDIO LAYER 3
Image format
JPG, GIF, BMP, PNG (animated GIF, etc. are not
supported)
Acceptable sampling frequency: 32, 44.1, 48 (kHz)
Supported image
file size
5M pixels for JPG, BMP, PNG (1M pixels maximum for GIF)
Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256, 320 (Kbps)
96, 128, 192 Kbps fixed bit rate/44.1kHz
ID3 Tag
Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3,
ID3v2.4 ID3 tags
Detailed
Specifications
Maximum directory layers: 20 layers
Maximum length of folder name/file name: 255Bytes
Supported characters for folder name/file name:
Alphanumeric characters, Korean standard character set 2,350 characters, Simplified Chinese 4888
characters
Maximum number of folders which can be stored
onto one USB: 2000 folders (including ROOT)
Maximum number of files which can be stored onto
one USB: 8000
i Information
02
• The sound quality of MP3 files that use bitrates exceeding
192 Kbps cannot be guaranteed. When using files without fixed bit rates,
some features (FF/REW features) may not properly operate.
USB I 2-15
USB Music Mode Display Controls
Features
Description
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
• If select the song in the file tab on the list
screen: Select the Repeat button to switch
between repeating one song, repeating
folder, and turning repeat off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Repeat button to switch between repeating one song and turning repeat off
Shuffle
Plays files in random order
• If select the song in the file tab on the list
screen: Select the Shuffle button to switch
between Shuffle Folder, Shuffle All, and turning shuffle off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Shuffle button to switch between Shuffle
Category and turning shuffle off
Description
Mode
Displays the current operating mode
File Index
Shows the current file/total files within the USB
Repeat/
Shuffle/Scan
From Repeat/Shuffle/Scan, displays the current
operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the information of the current track
• When a track in the file tab on the list screen
is selected: Displays folder, file, title, artist,
album info
• When a track in the other tabs on the list screen
is selected: Displays artist, title, album info
List
Moves to the list screen
Back Button
Converts to basic mode screen
2-16 I Radio/Media
Features
Features
Description
Menu
• Add to Playlist: Add the current track to the
Playlist: Playlist is placed on the left tab in the
list
• Save to My Music: You can save the current
track to My Music. You can play saved track
from My Music without USB. Access to My
Music in the Media mode.
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, select
the TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, the track
info for the current track is restored.
02
Scan
Scans the beginning parts of USB files (approx.
10 seconds per file)
• If select the song in the file tab on the list
screen: Select the Scan button to switch
between Scan Folder, Scan All, and turning
scan off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Scan button to switch between Scan
category and turning scan off
USB I 2-17
Features
Features
Displays folder/category name in the list
Current Song
Displays the current playing file name
Back Button
Converts to basic mode screen
Upper Folder/
Category
Moves to Upper Folder
2-18 I Radio/Media
Menu
• Add to Playlist: Adds the current track to the
Playlist: Playlist is placed on the left tab in the
list (Maximum 100 files) Select a desired track
and press “Add to Playlist” to add the track in
the playlist.
• Delete from Playlist: Select a track you want to
delete from the playlist and press “Delete from
Playlist” to delete the track in the playlist
• Now Playing: When moving to a different list
screen, moves to the list page where the current file is located (Becomes disabled when
the current list includes the current file)
• Save to My Music: Stores the music. The
stored music can be played in My Music. (This
function is not provided in Playlist.)
Search Menu
Search tracks by the list type. Search songs
according to File, Playlist, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or
fast-forward the track.
TUNE
TUNE knob to move the focus to the
Turn the
previous/next list. If the desired track is displayed,
press TUNE knob to play the track.
Description
Folder/
Category Name
Description
Features
Description
Mode
Displays the current operating mode
Folder/
File Name
Displays folder name where image is located
File Index
Shows the current file/total files within the USB
Slideshow
Images as slideshow in 5, 10, 20, 30 second
intervals
Rotate
Rotate image in clockwise direction
Info
Shows the file name, resolution and file type of
current image
Adjust Image
Size
Enlarge/reduce (zoom-in/zoom-out) image size
List
Moves to the list screen
Previous/
Next image
Swipe image left or right to see Previous/Next
image
02
USB Image Mode Display Controls
USB I 2-19
Features
2-20 I Radio/Media
Description
Current File
Displays the current playing file name
Back Button
Converts to basic mode screen
Menu
Now Playing: When moving to a different list
screen, moves to the list page where the current
file is located (Becomes disabled when the current list includes the current file)
SEEK/TRACK
Controls background mode
• Radio mode: Changes Frequency and Channel
• Media mode: Changes Track (excluding AUX)
TUNE
Controls background mode
• Radio mode: Changes Frequency and Channel
• Media mode: Changes track (excluding AUX).
If a desired track is displayed, press the knob
to move to the track.
Using iPod Devices
• iPod is a registered trademark of Apple
Inc.
• iPod mode will not operate if the connected iPod cannot be recognized due
• If repeatedly connect and disconnect
• To listen to the iPod sound, reconnect
iPod/iPhone to the Multimedia system
the USB cable or change the audio out-
with USB cable in a short time, it may
cause abnormal operation.
put settings in iPod/iPhone to Dock.
• In order to use the iPod while operating
• The time for recognition of iPod/iPhone
the keys, you must use a dedicated iPod
may vary depending on device type,
cable. (the cable that is supplied when
to operation of unsupported versions
• For some iPod Touch and iPhone
purchasing iPod/ iPhone products)
※ During ACC ON state, connecting the
that do not support related protocols,
devices, connecting Bluetooth® while the
iPod through the iPod cable (The cable
iPod abnormalities, or iPod device
iPod is operating may result in discon-
that is supplied when purchasing iPod/
defects. Some iPods with unsupported
tinued iPod sound. When such devices
iPhone product.) will charge the iPod
communication protocols may not prop-
with Bluetooth® support are connected,
erly operate with the Multimedia system.
this problem occurs as the sound source
through the head unit.
※ The use of genuine iPod cables sup-
• For fifth generation iPod Nano devices,
is changed from the Dock Connector
plied by Apple is recommended. (The
(USB connector cable) to Bluetooth.
use of other products may result in
the iPod may not be recognized when
firmware version and iOS version.
Audio function in the Multimedia system
noise or abnormal operation.)
※ To play iPod music through cable con-
• Search/play orders shown within the
is limited if iPod/iPhone is connected
nection, the iPod/USB cable must be
iPod device may differ with the orders
to the system through both cable and
connected to the USB port in the front
shown within the Multimedia system.
Bluetooth. To listen to the iPod sound,
multibox. The USB port in the center
• If the iPod malfunctions due to an iPod
use either iPod menu with USB connec-
console storage (if equipped) is for
device defect, reset the iPod and try
tion or Bluetooth Audio with Bluetooth
charging only.
again. (To learn more, refer to your iPod
connection.
the battery level is low. Please charge
the iPod for use.
• To prevent this symptom, Bluetooth
manual)
iPod I 2-21
02
iPod
• When connecting with the iPod cable,
• In Apple’s iOS 6.0 version or later,
make sure to fully insert the jack to pre-
Podcast and Audiobook media files
vent communication interference. If the
are designed to be played with the
iPod is connected to the vehicle while it
Podcasts and iBooks applications spe-
is playing, a high pitch tone may sound
cifically designed for Apple products. If
for about 1~2 seconds immediately
the Apple device does not provide the
after connection. If possible, connect
Podcast and Audiobook lists, the playlist
the iPod to the vehicle with the iPod
may not be displayed and played in the
stopped/paused.
iPod mode.
• Within iPhones, streaming audio and
• If the Apple Podcasts and iBooks apps
iPod control may occasionally conflict.
are not installed on the Apple device, but
If problems persist, remove the iPhone
the Apple device provides the Podcast
and connect again.
and Audiobook lists, you can play files in
• When connecting to iPod Nano/Classic,
other categories in iPod mode.
the Kia Motor logo appears on the Apple
• The screen of multimedia system can
device. For the iPod Nano 6 genera-
be different when you run other music
tion, however, the logo image does not
players (e.g. iHeartRadio) on your con-
appear since it is not supported. Also, all
nected device.
iPhone and iPod Touch products do not
support this function.
2-22 I Radio/Media
• If you control pause, repeat, shuffle, or
• We recommend that your Apple device
seek songs when the play time is less
uses the latest firmware since some
• While using a connected iPhone/iPod
than 3s before the song is finished play-
problems may occur due to an outdated
Touch device, it may not operate nor-
ing, it may occur difference of playing
firmware or other software related
mally if the user changed some func-
song between the Multimedia system
issues.
tions in the device.
and Apple device. Access to iPod music
• When calling with an iPhone connection, song may stop playing due to an
Apple device feature. If sound does
not resume after the call is terminated,
check the device status.
• If lots of songs have the same information, skipping may occur when previous/
from another mode or pause a song and
then play a song again in Apple device.
Type
1G
• If lots of songs have the same information, the song that plays may be different between the system and the Apple
device. Reset the device or delete the
5G
Not Supported
Not Supported
iPod Nano
○
iPod Touch
(iOS 1.1
not supported)
○
○
○
○
○
○
○
○
6G
6.5G
7G
○
Not
released
○
○
Not released
iPad
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPad Mini
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPod Classic
Not Supported
○
○
○
(iPod with
Video)
(iPod
Classic)
(iPod
Classic)
Not
released
Type
3G
3GS
4S
5C
5S
6+
iPhone
Not verified,
Normal
working not
guaranteed
○
○
○
○
○
○
○
○
same songs in the Apple device using
iTunes.
4G
iPod Mini
occur depending on device type or iOS
version.
3G
iPod Shuffle
next song is executed due to an Apple
device feature. Also problems may
2G
iPod I 2-23
02
Caution
Caution
• If connect to the Multimedia system
while podcast or iTunes music down-
• If the iPhone/iPod Touch supports
loading to iPod/iPhone, it may occur
Bluetooth, the Apple device will not be
some problems when you select song
able to use the Bluetooth function if the
in the list. Reconnect iPod/iPhone to the
device is connected through both the
Multimedia system when downloading
USB port and via Bluetooth. Disconnect
the USB connection then use Bluetooth
Audio.
is finished or the file deleted.
• If connect to the Multimedia system
while sync, it may occur some problems.
• If iPod/iPhone connected to the
Try to use iPod/iPhone connection after
Multimedia system through both USB
sync complete. (To learn more, refer to
and AUX. iPod/iPhone keeps output
your iPod manual)
sound via AUX, thus it may occur sound
will not output in iPod mode.
• iPhone and iPod Touch devices are
guaranteed to work normally on iOS
• If AUX cable connected to iPod/iPhone
9.3.2 or below. However, they may not
but not connect to the Multimedia sys-
work normally on future iOS versions
tem, it may occur sound will not output
as their operations have not yet been
in iPod mode due to iPod/iPhone’s fea-
tested.
ture. Especially, if you use AUX cable
like pictures, this problem may occur.
• Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone.
2-24 I Radio/Media
Features
Features
Description
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
Select the Repeat button to switch between
repeating 1 track, and turning repeat off
Shuffle
Plays files in random order
When selecting the Shuffle button, it changes to
shuffle category → deactivate shuffle then
repeat
• Shuffle Category: Shuffle song in the current
category
Back Button
Move to home/previous mode screen
Menu
Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the sound.
Description
Mode
Displays the current operating mode
Song Index
Shows the current song/total songs
Repeat/Shuffle
From Repeat/Shuffle, displays the current operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the artist/song title/album info
List
Moves to the list screen
iPod I 2-25
02
iPod Mode Display Controls
Features
TUNE
2-26 I Radio/Media
Description
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press
the TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, the track info
for the current track is restored.
Features
Description
Displays the category name
Category List
Displays the contents of selected category
If there are many items in the list, items are
added in order and the scroll bar on the right
is adjusted accordingly.
Back Button
Converts to basic mode screen
Upper Category
Moves to Upper Category
Search Menu
Search tracks by the list type. Search songs
according to Playlist, Artist, Song, Album,
Genre, Composer, Podcast and Audiobook.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind
or fast-forward the track.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press
the TUNE knob to play the track.
If you do not anything with the knob for
TUNE knob search will be
5 seconds, the
terminated.
02
Category Name
iPod I 2-27
AUX
Connecting an External Device
If an external device connector is connected with the AUX terminal, then AUX
mode will automatically operate. Once the
connector is disconnected, the previous
mode will be restored.
• AUX mode can be used only when an
NOTICE
• If only a cable is connected to the AUX
without an external device, the mode will
be changed to AUX, but noise may occur.
When an external device is not being
used, remove the connector jack.
• When the exter nal device power is
connected to the power jack, playing the
external device may output noise. In such
cases, disconnect the power connection
before use.
external audio player has been connected.
• The AUX volume can also be controlled
separately through the connected
device.
※ The actual feature in the vehicle may
differ from the illustration.
2-28 I Radio/Media
Features
Title
Name of current song
Previous File
• If play time is less than 3 seconds, moves to
the previous file
• If play time is more than 3 seconds, plays the
current file from the beginning
This function may differ depending on the
model of mobile phone.
Play/Pause
Plays/Pauses Bluetooth Audio
Next File
Moves to the next file
Repeat
Repeats the current file.
This function may differ depending on the
model of mobile phone.
Shuffle
Plays files in random order.
This function may differ depending on the
model of mobile phone.
Menu
• Connections: Moves to the Bluetooth Settings
screen. You can pair a new device or change/
delete paired device(s).
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
SEEK/TRACK
Plays the previous/next file
Bluetooth Audio Mode Display Controls
Features
Description
Mode
Displays the current operating mode
Phone Name
Displays name of connected phone
Artist Info
Name of current artist
Description
TUNE
TUNE is not supported
02
Bluetooth® Audio
i Information
• Artist info and Title may not be supported by mobile phone
Bluetooth® Audio I 2-29
Bluetooth Connection Settings
Settings for pairing, connection and disconnection of a Bluetooth device.
• In Bluetooth Audio play screen, select
Menu and then Connections .
i Information
• If the music in the mobile phone is not
played after changing to audio streaming
mode, press the play button. Thus check if
the music is playing in the Bluetooth device
after changing to audio streaming mode.
Audio streaming may not be supported for
some mobile phones.
• Please check the Bluetooth compatibility
in below website: KIA Motors Corporation
http://www.kia.com
2-30 I Radio/Media
Features
List
Moves to the list screen
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
• If select the song in the file tab on the list
screen: Select the Repeat button to switch
between repeating one song and turning
repeat off.
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Repeat button to switch between repeating one song and turning repeat off
My Music Mode Display Controls
Features
Description
Mode
Displays the current operating mode
File Index
Shows the current file/total files
Repeat/
Shuffle/Scan
From Repeat/Shuffle/Scan, displays the current operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the information about the current track
• When a track in the file tab on the list screen is
selected: Displays file, artist, title, album info
• When a track in the other tab on the list
screen is selected: Displays artist, title,
album info
Description
02
My Music
My Music I 2-31
Features
2-32 I Radio/Media
Description
Shuffle
Plays files in random order
• If select the song in the file tab on the list
screen: Select the Shuffle button to switch
between shuffle and turning shuffle off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Shuffle button to switch between shuffle
and turning shuffle off
Scan
Scans the beginning parts of files (approx. 10
seconds per file)
• If select the song in the file tab on the list
screen: Select the Scan button to switch
between scan and turning scan off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Scan button to switch between scan and
turning scan off
Menu
• Add to Playlist: Adds the current song to the
Playlist: Playlist is placed on the left tab in the list
• Delete Current File: Deletes the current track
from My Music.
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the sound.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press the
TUNE knob to play the track.
If the
TUNE knob is not pressed within
5 seconds of searching tracks, the track info
for the current track is restored.
Features
Menu
• Add to Playlist: Adds the current track to the
Playlist: Playlist is placed on the left tab in the
list (Maximum 100 files) Select a track and
press “Add to Playlist” to add the track in the
playlist
• Delete from Playlist: Select a track from the
playlist and press “Delete from Playlist” to
delete the track in the playlist
• Delete Files: Deletes files from My Music
If delete file from My Music, the information
related to song also deleted in the list.
• Now Playing: When moving to a different list
screen, moves to the list page where the current file is located (Becomes disabled when
the current list includes the current file
Search Menu
Search tracks by the list type. Search songs
according to File, Playlist, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or
fast-forward the track.
TUNE
TUNE knob to move the focus to preTurn the
vious/next file. If the file you want to play is displayed, press TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, Tune search
will be terminated.
Description
Folder/
Category Name
Displays folder/category name in the list
Current Song
Displays the current playing file name
Back Button
Converts to basic mode screen
Upper Folder
Moves to Root Folder
Description
My Music I 2-33
02
Features
MEMO
part.3
Bluetooth
®
Before Using the Bluetooth Handsfree
Bluetooth Connection
Bluetooth Phone
Bluetooth
Before Using the
Bluetooth® Handsfree
®
• The Bluetooth Handsfree feature may
What is Bluetooth ®
Wireless Technology?
Precautions for Safe Driving
®
not be supported in some mobile phones.
• Bluetooth is a feature that enables driv-
For more information on mobile phone
ers to make handsfree calls. Connecting
compatibility, visit the KIA Motor website
the head unit with a Bluetooth phone
- KIA Motors Corporation: http://www.kia.com
allows the user to conveniently make
• Bluetooth® Wireless Technology refers
®
calls, receive calls, and manage the
®
to a short-distance wireless network-
WARNING
phonebook. Before using Bluetooth
ing technology which uses a 2.45GHz
- Distracted Driving
Wireless Technology, carefully read the
frequency to connect various devices
within a certain distance.
• Supported within PCs, external devices,
®
Bluetooth phones, PDAs, various electronic devices, and automotive environ®
ments, Bluetooth Wireless Technology
to be transmitted at high speeds without
having to use a connector cable.
®
• Bluetooth Handsfree refers to a device
which allows the user to conveniently
make phone calls with Bluetooth
®
mobile phones through the Multimedia
system.
3-2 I Bluetooth
• Focus on the road while driving. The driver's
primary responsibility is in the safe and legal
operation of the vehicle. Drivers should not
use any hand held devices or other equipment
or vehicle systems that distract the driver
during vehicle operation.
• Do not stare at the multimedia screen for long
periods of time while driving. Staring at the
screen for prolonged periods of time can lead
to traffic accidents and can result in personal
injuries.
contents of this user’s manual.
• Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do
not operate the device excessively while
driving.
• Viewing the screen for prolonged periods of time is dangerous and may lead
to accidents. When driving, view the
screen only for short periods of time.
CAUTIONS upon Connecting
Bluetooth® Phone
• If you do not want automatic connection
®
with your Bluetooth device, turn the
• Before connecting the head unit with the
mobile phone, check to see that the mobile
®
phone supports Bluetooth features.
• Even if the phone supports Bluetooth
®
®
Bluetooth feature off of the Bluetooth
may differ depending on the mobile
phone.
®
• Pairing Bluetooth devices and use of
device.
• Park the vehicle when connecting the
®
• The Handsfree call volume and quality
head unit with the mobile phone.
®
®
other Bluetooth features are not supported when the vehicle is in motion. For
Wireless Technology, the phone will
• Bluetooth connection may become
not be found during device searches if
intermittently disconnected in some
• If you continue having issue download-
the phone has been set to hidden state
mobile phones. Follow these steps to try
ing your contacts to your vehicle, con-
again.
tact your mobile phone provider.
Disable the hidden state or turn on the
®
Bluetooth power prior to searching/
connecting with the head unit.
• I f Au t o C o n n e c t i o n i s u s e d , t h e
®
Bluetooth phone is automatically connected when the ignition is turned on,
making it unnecessary to have to connect the phone with the head unit every
time.
®
1. Turn the Bluetooth function within the
mobile phone OFF/ON and try again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile phone
battery, reboot, and then again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both of
Phone and Head Unit sides and then
try again.
03
®
or the Bluetooth power is turned off.
safety, please first park your vehicle.
Before Using the Bluetooth® Handsfree I 3-3
Bluetooth Connection
Pairing a New Device
Pairing a New Device Through the
Phone Settings
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
Connects the Bluetooth devices that you
Press the
key. ▶ Select Bluetooth .
▶ Select Bluetooth Connection . ▶ Select
add.
. ▶ Pair your car after your mobile
phone detects the Bluetooth device. ▶
Connecting Devices by Selecting
Phone/Call
Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.
Press the
SETUP
Before you can use the Bluetooth feature,
Connecting Bluetooth Devices
Add New
nected at a time.
key or
key in
the steering wheel control. ▶ Select the
name of the device to connect. ▶ Connect
Bluetooth.
Pairing a New Device by Selecting
Phone/Call
Press the
PHONE
key or
key in
the steering wheel control. ▶ Pair your car
after your mobile phone detects the
Bluetooth device. ▶ Enter the passkey or
accept the authorization popup. ▶
The default passkey is 0000.
Connect Bluetooth.
The vehicle name above is an example.
Check the actual information on the product.
3-4 I Bluetooth
PHONE
Press the
key. ▶ Select Bluetooth .
▶ Select Bluetooth Connection . ▶ Select the
SETUP
Disconnecting
Bluetooth Devices
Deletes the Bluetooth devices that you
Disconnects Bluetooth devices that are
added. Note that deleting a Bluetooth
connected.
device will delete all Call History and
name of the device to connect. ▶ Connect
Bluetooth.
Deleting Bluetooth Devices
Contact Info downloaded along with it.
Press the
▶ Select
key. ▶ Select Bluetooth .
Bluetooth Connection . ▶ Select the
SETUP
name of the device to disconnect.
Press the
Select
SETUP
key. ▶ Select
Bluetooth Connection
Delete Devices
Bluetooth
.▶
. ▶ Select
. ▶ Select the device name
to delete. ▶ Select
Delete
03
Connecting Devices Through the
Phone Settings
Bluetooth Connection I 3-5
Bluetooth Phone
Phone Status Icons
Shows the current phone status in the
right top of the display.
Icons
Description
You can use Bluetooth phones
when a Bluetooth Hands-free
connection is established.
You can use Bluetooth audio
features when a Bluetooth
audio connection is established.
You can use Bluetooth phones
and audio features when both
Bluetooth Hands-free and audio
connections are established.
Call signal strength indicator
Battery level of the Bluetooth
devices connected
Downloading Call History list
Downloading Contacts
In a Bluetooth phone call
Microphone muted
3-6 I Bluetooth
i Information
• The battery level icon and the call signal
strength indicator may not be supported in
some Bluetooth devices.
• The battery level may differ from the actual
level remaining.
Name
Keypad
Use the keypad to enter
the phone number that you
want to call. Press and hold
the last number of a speed
dial to dial a number that
you added to the Speed
Dial list in the phone
Call
Makes a call after you dial
a number and select CALL.
If the number is listed in
Dialed Calls, you can select
the number and press
CALL to automatically dial
that number again.
Dials a call after the Bluetooth devices are
connected.
• Press the
PHONE
key or
key in
the steering wheel control.
• You can also select All Menus icon, and
then
Phone
Description
icon.
Settings
Moves to a screen of
Phone Settings.
Delete
Deletes the numbers that
you entered.
Accept/Reject Call
If there is an incoming call after you made
a Bluetooth connection, a popup message
will appear.
Name
Description
Accept
Answers the call.
Reject
Ignores the call.
i Information
• Some types of mobile phones may not
support the Speed Dial function.
i Information
• In some mobile phones, the caller's number
may not be displayed, and the Reject feature
may not be supported.
03
Dial
Bluetooth Phone I 3-7
Using the Menu During
a Phone Call
When making a call, you can use the following menu items.
3-8 I Bluetooth
Name
Description
Use Private
Switches a voice call
from the car Hands-free
to the mobile phone.
End
Ends a call.
Contacts
Displays the Contacts list.
Outgoing
Volume
Displays the Mic Volume
settings. You can adjust
the in-call volume that
the other party hears
(level 1 - 5).
Keypad
Moves to a screen for
entering ARS numbers.
Switch
Switches to a call on
hold, if any. You can also
switch calls by selecting the number in the
Information Display. The
Switch function switches
the current call to a waiting call in order to answer
a new incoming call.
i Information
• If the caller's number is listed in Contacts, the
caller's name will be displayed. Otherwise,
only the number will be displayed. In some
mobile phones, the phone number may not
be displayed.
• In some Bluetooth devices, the Use Private
feature may not be supported.
• In some Bluetooth devices, the Switch feature
may not be supported.
• During a phone call on a Bluetooth Handsfree, you cannot access other modes, such as
Radio and Settings.
• Depending on handset types, the in-call
volume the other party hears may differ. If the
other party hears your voice too low or too
loud, adjust the mic volume.
i Information
Press the
PHONE
Name
key, and then
Call History
Description
All
Lists the all call history.
Dialed
Lists the calls that you
made.
Received
Lists the calls that you
have received.
Missed
Lists the calls you
missed.
Call History
Displays all of your call
history. Select from the
list to dial the number.
Download
Downloads the call
history information from
your mobile phone.
• In some mobile phones, call records may not
be added to your Call History.
• Calls from restricted ID's are not added to
your Call History Information.
• Up to 50 calls can be added in each Dialed
Calls/Received Calls/Missed Calls list.
• The durations of each dialed/received call are
not displayed in your car's Call History list.
• While the call history download is in progress,
the status bar displays an icon ( ).
• If the call history download is turned off on the
Bluetooth device, the call history download
will fail.
• Some devices require a device authentication
for downloading your call history. If download
fails, check if the Bluetooth settings or display
status are normal.
• Some devices do not support call history
download. Check if your Bluetooth device
supports download feature. For details regarding
Bluetooth-supported devices and their functional
compatibility, visit http://www. kia.com
03
Call History
Bluetooth Phone I 3-9
i Information
Contacts
Press the
PHONE
Name
key, and then
Contacts
Description
Contacts List
The list of Contacts.
Select from the list to
dial the number.
Download
Downloads contacts
from your mobile phone.
Search
Searches Contacts.
3-10 I Bluetooth
• U p t o 5 0 0 0 p h o n e nu m b e r s c a n b e
downloaded from a single, paired Bluetooth
device.
• You cannot edit or delete downloaded phone
numbers from your car.
• Contacts can be viewed only when the
Bluetooth device is connected.
• Even if the Bluetooth device is disconnected,
the downloaded data will remain. (Note that
deleting a paired phone will also delete all
downloaded Contacts and Call History data)
• Downloaded phone numbers may be lost
depending on the condition of the head unit.
Keep your important data in a safe place.
• Contacts from both the SIM card and your
mobile phone are downloaded at the same
time by default.
• The status bar displays a ( ) while
downloading contacts.
• The download will not be available if the
contacts download function is turned off on
your Bluetooth device.
• Some devices require a device authentication
for downloading your contacts. If download
fails, check your phone screen and confirm
the download if necessary.
• Some devices do not support contacts
download feature. Check if your Bluetooth
device supports contacts download. For
Bluetooth supporting devices details and
compatibility, visit http://www.kia.com
Favorites
PHONE
key, and then
Favorites
Name
Description
Favorites
Lists the phone numbers saved as Favorites.
Select from the list to
dial the number.
Add New
Adds a new number to
Favorites.
Delete Items
Deletes numbers
that you select from
Favorites.
Delete All
Deletes all of the numbers from Favorites.
03
Press the
Bluetooth Phone I 3-11
MEMO
part.4
UVO eServices
The 911 Connect feature may not operate in the following situations
About UVO eServices
Before using UVO eServices
Connecting Bluetooth
Pair a device from Bluetooth-enabled phone
Connecting to smartphone via USB
911 Connect
Roadside Assist
Vehicle Diagnostics
My Car Zone
Parking Minder
eServices Guide
UVO eServices
The 911 Connect feature may not
operate in the following situations
When the vehicle ignition is not turned on.
®
When the phone Bluetooth feature is set to off.
®
When the system power supply is unstable.
When the attempted call is blocked due to user operations.
When the phone Bluetooth cannot be connected or becomes
When the 9-1-1 call is unstable due to phone or other commu-
disconnected.
nication network issues.
When there are no phones paired with the vehicle.
When the call feature is not operating due to phone settings set
by the user.
When cellular service is unavailable.
®
When the phone cannot be controlled via Bluetooth due to
When the power turns off due to phone power (battery) issues.
®
When a Bluetooth device without phone feature support has
been connected, such as an MP3 device.
When the system is booting.
4-2 I UVO eServices
phone specifications or characteristics.
Using UVO eServices and Precautions
UVO eServices may not operate properly with incompatible
smartphones. To view the list of compatible smartphones,
Download the UVO eServices App and install it on your smartphone.
please visit MyUVO.com
The app can be downloaded from your smartphone’s app store.
Communication between the vehicle and smartphone app may
For using UVO eServices call features such as 911 Connect,
temporarily disconnect depending on the phone state.
Roadside Assist and eServices Guide, a smartphone must be
connected with the vehicle via Bluetooth. Pair and connect your
If the feature is not operating properly, you may need to reset
smartphone with the vehicle. For information on connecting
the UVO eServices App or the smartphone and try again
your Bluetooth device, refer to the smartphone user’s manual
according to the following steps.
and instructions on the Phone Help screen on your radio. Up to
1. Try feature again in the Head Unit
five Bluetooth devices can be paired to the vehicle and only
2. Restart smartphone app
one device can be connected at a time.
3. Re-connect Bluetooth and USB cable
4. Reset smartphone
For using data communication of Vehicle Diagnostics, Parking
5. Delete Device and pair again
Minder, and My Car Zone, smartphone must be connected with
other products may result in abnormal or non-proper operation.)
Some services use the customer’s mobile phone data plan for
data communication. Therefore, the features will function in
accordance with the cellular plan.
Login and activate the UVO eServices App on your smartphone.
Use of the most up-to-date app version is recommended.
Some UVO eServices features will only be available when your
For smartphone related inquiries, please visit MyUVO.com.
smartphone is connected with the vehicle via USB and the
UVO eServices App is running.
Using UVO eServices and Precautions I 4-3
04
the vehicle via USB cable.
※ The use of genuine cable is recommended. (The use of
i Information
About UVO eServices
UVO eServices provides the following features through Bluetooth
and/or USB connection to your smartphone.
Name
Connection
Description
• 24-hour Roadside Assistance is a service plan provided by Kia Motors
America, Inc. Certain limitations apply. Coverage details are available
in the Kia Warranty and Consumer Information Manual. For access
to Enhanced Roadside Assistance, a connected mobile phone via
Bluetooth within the cellular service coverage area is required.
911
Connect
BT
If an airbag deploys, your vehicle
automatically initiates a call to 9-1-1
and sends your vehicle’s location
information to the 9-1-1 operator.
Roadside
Assist
If a diagnostic issue exists, you can
connect with a Roadside Assist.
1. The UVO eServices smartphone app must be installed and
BT & USB
2. The smartphone must be connected via Bluetooth and USB
USB
Informs you if there is a diagnostic
issue found in your vehicle. If an
issue is found, you can contact a
call center through Roadside Assist
or reserve an appointment with
your preferred Kia dealer through
Schedule Service.
USB
Keeps track of predefined triggered
alerts such as Speed Alert and
Curfew Limit Alert from the My Car
Zone feature.
Parking
Minder
USB
Saves the location of your parked
vehicle on your UVO eServices
smartphone app.
You can check where your vehicle is
parked through the UVO eServices
App on your smartphone.
eServices
Guide
BT
Receive guidance on how to use
UVO eServices.
Vehicle
Diagnostics
My Car
Zone
4-4 I UVO eServices
To use UVO eServices, the following conditions must be met.
you must log in using your MyUVO account credentials.
cable to the vehicle.
3. Once this is complete, eServices must be activated.
Connecting Bluetooth
Press the
key on the steering
Installing the UVO eServices App on your
wheel or press the
smartphone
head unit. Press
1. Download and install the UVO eSer-
Bluetooth Connection
vices App on your smartphone.
The app can be downloaded from the
Apple App Store or Google Play.
2. Register your vehicle and account at
MyUVO.com
Note: MyUVO.com is accessible from
your phone’s browser.
3. Start the UVO eServices App on your
smartphone and log in.
Pair a device from
Bluetooth-enabled phone
PHONE
SETUP
▶
key on the
Bluetooth
▶
1. Turn on the Bluetooth feature on your
smartphone’s Bluetooth settings screen.
2. Search Bluetooth devices on your
smartphone.
3. Select the Vehicle Name on the phone
that matches the name shown on the
screen.
4. Verify the passkey shown on the touchscreen.
If the phone supports SSP, check the
®
passkey on your Bluetooth device and
confirm the authentication.
04
Before using UVO
eServices
Pair a device from Bluetooth-enabled phone I 4-5
Connecting to
smartphone via USB
Activating UVO eServices
Press the
UVO
Vehicle Diagnostics
1. Connect your smartphone with the vehi-
Parking Minder
Press the
key, then press the
or
My Car Zone
Yes
button, then the UVO
eServices activation process will begin.
or
button.
cle via USB cable.
NOTICE
• For smartphone related inquiries, please visit
MyUVO.com.
NOTICE
• Before activating UVO eServices, ensure
your phone is connected to the vehicle via
USB cable.
4-6 I UVO eServices
911 Connect
Initiating a 911 Call
If an airbag deploys, the following screen
911 Connect
If an airbag deploys, your vehicle automat-
is displayed and a call is automatically
placed to 9-1-1 after 10 seconds.
ically initiates a call to 9-1-1 and sends
your vehicle’s location information to the
9-1-1 operator.
The 911 Connect feature is available only
when the mobile phone is connected via
Bluetooth.
By default, this feature is turned off. To turn
it on, you must turn it on in the eServices
Once a call is connected with a 9-1-1
Settings menu. By enabling this feature,
operator, it is possible to request emer-
you are agreeing to the 911 Connect
gency services to be dispatched to your
terms of use.
location.
A ( ) icon is displayed at the top of the
touch screen as shown below when phone
is connected to UVO eServices system via
04
Bluetooth and the 911 connect feature is
turned on.
911 Connect I 4-7
The 9-1-1 operator may request informa-
When the 9-1-1 operator attempts to talk
tion on the current location of your vehicle.
to the driver again, the call time is dis-
When the 9-1-1 operator requests your
played and allows the driver to speak with
vehicle location, “Sending Location” is
the 9-1-1 operator.
Roadside Assist
Roadside Assist
If there is any issues in the vehicle, you
displayed on the screen and the vehicle
can connect with a Roadside Assist agent.
location is automatically sent to the 9-1-1
The Roadside Assist feature can be used
operator.
only when your phone is connected via
Bluetooth.
Press the
4-8 I UVO eServices
UVO
key ▶
Roadside Assist
Vehicle Diagnostics
Press the
UVO
key ▶
Vehicle Diagnostics
Conducting Vehicle
Diagnostics
Vehicle Diagnostics is available only when
the ignition is turned on and the vehicle is
parked.
If diagnostic issues are found, press the
Send Report button to send to your MyUVO
It also requires that UVO eServices is
activated, and the Phone is connected
but-
via USB cable before starting Vehicle
The Vehicle Diagnostics process will begin.
account or press the
Diagnostics.
When a diagnostics check is in progress,
ton to schedule an appointment with your
keep the vehicle in park with the ignition
preferred or nearby Kia dealer.
Schedule Service
on. To cancel diagnostics, press the
Cancel
button on the touch screen or
04
any hardkey.
Vehicle Diagnostics I 4-9
Schedule Service
Press the
Preferred
or
Nearest
button.
Press the
When scheduling an appointment using
the Schedule Service button, pressing the
Preferred
Send Report
Send Report
in the vehicle diag-
nostics result screen.
button will allow you to request an
appointment with your preferred Kia dealer
and send your vehicle’s diagnostics information.
Pressing the
Nearest
button will allow you
to request an appointment with the nearest Kia dealer and send your vehicle’s
Request an appointment with Preferred or
diagnostics information.
Nearest Kia Dealer and send your vehicle’s diagnostics data.
Vehicle Diagnostics Data is transmitted to
your account and you can see the report
on MyUVO.com
4-10 I UVO eServices
Scheduled Diagnostics
after Vehicle Diagnostics, it is recom-
If you have set up Scheduled Diagnostics
mended that you send the diagnostic
on your UVO eServices App, a vehicle
results to your MyUVO account.
Press the Send Report button to send the
diagnostics check will automatically start
diagnostics results to your MyUVO
On the date of the Scheduled Diagnostics,
account.
the following window will be displayed.
on the day you selected.
Press the
Send Report
button to see the
Vehicle Health Report on MyUVO.com.
Press the
Yes
button on the touch screen
to proceed with diagnostics.
04
Even if diagnostic issues are not found
Vehicle Diagnostics I 4-11
My Car Zone
Press the
vehicle’s powertrain is detected, Automatic
My Car Zone is a feature that provides
Curfew Limit Alerts History
Diagnostics will be notified.
alerts and driving history for Curfew Limit
Automatic Diagnostics
UVO
key ▶
My Car Zone
If a critical diagnostics issue with your
Alerts and Speed Alerts set by the user.
Name
Description
Curfew Limit
Alert
Curfew Limit Alerts are
alerts that are triggered
when a driver is driving
within a predefined time
range.
Speed Alert
Speed Alerts are alerts
that are triggered when
a driver exceeds the
predefined maximum
speed.
My Car Zone features are supported only
when UVO eServices has been activated.
NOTICE
• The screen messages differ based on the
vehicle diagnostics severity. Ensure your
phone is connected to the system via USB
cable before using
Send Report .
4-12 I UVO eServices
Schedule Service
and
Speed Alerts History
Curfew Limit Alert
Curfew Limit Alert
Speed Alert
You can check the Curfew Limit Alert his-
You can check the Speed Alert history for
tory for a list of past triggered curfew alerts.
triggered speed limit alerts of the vehicle.
Speed Alert
Description
Phone
Name of phone connected upon triggered
curfew limit
Alert Time
Initial alert time
Duration
Total duration of driving
while curfew limit was
triggered
Driving Time
Total driving time from
turning ignition on until
turning ignition off
Name
Description
Phone
Name of phone connected upon triggered
speed limit alert
Max. Speed
Maximum vehicle speed
upon triggered speed
limit alert
Alert Time
Time from first triggered
alert until last triggered
alert
Duration
Total triggered alert time
from turning ignition on
to turning ignition off
My Car Zone I 4-13
04
Name
To check My Car Zone alert history from
Parking Minder
your smartphone, you must first send the
alert history to your MyUVO account.
Once the parking location has been sent,
you can view your vehicle’s location from
Sending Parking Location
The location where your vehicle is currently
the UVO eServices App on your smartphone.
parked can be sent to your smartphone.
Ensure that your smartphone is connected
via USB and the UVO eServices App is
running before using this feature.
After parking the vehicle, press the
UVO
key ▶ Parking Minder to send the
vehicle’s location to your smartphone.
NOTICE
• When the parking location is being sent, do
not drive the vehicle. Ensure that you have
logged into the UVO eServices App, and your
phone is connected to the multimedia system
via USB cable.
• When ignition is turned off while the phone is
connected via USB, Parking Minder can be
transferred automatically if the option is set up
in UVO eService Settings
4-14 I UVO eServices
eServices Guide
UVO eServices Settings
Refer to
SETUP
key ▶
UVO eServices
eServices Guide
eServices Guide provides guidance on
how to use UVO eServices.
This feature is only available when the
mobile phone is connected via Bluetooth.
UVO
key ▶
eServices Guide
04
Press the
eServices Guide I 4-15
MEMO
part.5 Navigation
Basic Features
Menu
Destination Search
Route Search
Navigation Settings
Troubleshooting
06
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-1
2016-11-04 오후 3:02:1
Navigation
Basic Features
Name
Description
Move to Places Menu.
Operating Navigation Screen
Go to the Home screen.
Basic features on the map screen.
Change the map view mode.
Adjusts the volume.
Zoom in the map.
Set the zoom level automatically according
to the guidance.
Zoom out the map.
Quick and easy selection of a destination
and options.
Navi
Menu
Enter the navigation menu screen.
Touch to scroll the map.
Set as
Destination
Add
Waypoint
Quick and easy selection of a destination
from the map screen.
Set a waypoint to the current route.
Save
Save frequently used address to address
book.
POI
Find a POI(Point Of Interest) around the
current position.
View the vehicle’s current position on the
map screen.
6-2 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-2
2016-11-04 오후 3:02:1
Places
Changing Map View
Name
Description
You can use this menu when the gear is in
Touch the compass arrow icon to toggle
Set the volume to mute.
“Parking” mode and there is no destination
between a map oriented to the North, ori-
Turn the volume down.
set. Press the Search screen to move to
ented parallel to the vehicle’s heading and
3D View.
Turn the volume up.
“Places”.
Sets the volume of voice guidance louder than that of audio.
06
Navigation Volume
Slide to set the volume.
Please refer to “Places” in “Destination
Search” for more details.
Press the
button to adjust the naviga-
tion volume.
Basic Features I 6-3
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-3
2016-11-04 오후 3:02:3
Zoom In/Zoom Out
Zoom the map view screen in and out.
Menu
Map Scale
Sets the zoom level automatically accord-
Route
ing to the type of road.
Press
button on the bottom left of the
screen ▶ Press
Press
or
Route
button.
to set the zoom level.
Name
Description
Scale Fix
Manually adjust the map
scale.
Auto Scale
Change the map scale
automatically depending
on the type of road.
Select the
Route
Route Options
or
button to set
Detour
Reroute
6-4 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-4
2016-11-04 오후 3:02:3
Reroute
The
Detour
You can select an option from Route,
The
there is an active route.
Traffic Information, Freeway, Toll Roads,
there is an active route.
You can search a route again.
Ferry, HOV/Carpool Lanes, Electronic Toll
Reroute
button is active only when
Route Options
Detour
button is active only when
or Private/Gated Roads.
Press
Save
to save your selection.
If there is a route already saved, another
route will be searched.
Selected distance is detoured from the
06
current location.
Menu I 6-5
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-5
2016-11-04 오후 3:02:4
Map Display
POI
Displays the direction of the map.
or
Press
The lists of nearby gas stations are dis-
Select the
button on the bottom left of
the screen ▶ Select the
POI
played.
button.
View Nearby POIs
The list can be sorted to display in order of
distance or name.
Name
Description
North
Up (2D)
Displays always has
north at the top of screen.
Press
Heading
Up (2D)
Displays always shows
the vehicle’s direction as
proceeding towards the
top of the screen.
ries are selected, they will appear on the
3D
Shows the map in
3 dimentions.
3D Buildings
On
Off
button to set whether to
show nearby POIs or not. When categomap. (ex. Gas Stations)
Shows or hides buildings on the map.
6-6 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-6
2016-11-04 오후 3:02:4
Edit
Select new category to display (ex.
Name
Call to the selected
location (Phone needs
to be connected via
Bluetooth).
Set as
Destination
Set the place as a destination.
Add
Waypoint
Set the location as a
waypoint.
Save
POI
American)
Description
Change the shortcut POIs to display (ex.
Gas Stations)
Save the location.
Search nearby POIs.
Gas Stations
is changed to
American
Select the desired category to change. (ex
06
Restaurants)
Menu I 6-7
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-7
2016-11-04 오후 3:02:4
POI Categories
Press the
Search
button to search the
POI category by name.
Name
Description
Search POI around the current
position.
Search POI around the destination.
Active only when a route’s
planned.
Search POI along route.
Active only when a route’s
planned.
Search POI around the current
cursor when the map scrolled.
Active only when the cursor
position is different from the
vehicle position.
Select the item to search.
Press the
History
button to check the pre-
vious search result.
Search POI around the city
selected.
Select the desired POI to check the location and for detailed information.
6-8 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-8
2016-11-04 오후 3:02:5
Traffic
Press the
Name
button on the bottom left of
the screen ▶ Select the
Traffic
button.
Traffic List
Description
Name
Direction from the current location.
Distance from the current location (mi or km).
Display ‘Accident’ information.
Displays traffic info symbol based
on the type of event.
Display ‘Slow Traffic’ information.
Display ‘Incident’ information.
Description of traffic event.
Display ‘Hazardous Road
Conditions’ information.
Additional traffic information may be displayed upon clicking on the
Category
Description
Display ‘Road Construction’ information.
Display ‘Travel Information’.
button.
When
On Route
is activated, only traffic
06
information on your route is displayed.
On the traffic list, the current traffic/road
event information is displayed in order of
distance.
Menu I 6-9
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-9
2016-11-04 오후 3:02:5
Traffic detail
Name
Description
Symbol of traffic event.
Event name of traffic information.
Road name/road number including direction.
Direction and distance from the
current location.
Intersection where traffic event
starts.
On the traffic list, the current basic traffic/road event information is displayed in
Intersection where traffic event
ends.
order of distance.
Select the combo box to change the
Select the traffic information on the traffic
Total distance of traffic event.
arrangement in order of Categor y/
list to display the detailed screen as shown
Estimated delay time.
Distance.
in the screen.
Display the symbol of traffic event and
Check the previous traffic information.
Name
Description
arrow which indicates the road from start
Check the next traffic information.
Select the combo box to arrange.
to end of the traffic event. Detailed infor-
Arrangement by category: Display
traffic information arranged in
order of traffic information event
type.
mation is available on the right screen.
Detour the route based on the
traffic information.
Arrangement by distance: Display
the traffic information in order
of distance closer to the current
location.
6-10 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-10
2016-11-04 오후 3:03:0
Traffic detour
If there is traffic information on the route, it
on.
is possible to detour the route using traffic
information and search other routes.
When the
Detour
button is enabled in the
View Traffic Detail, press the
Detour
button
to detour.
Select the desired section.
Press the
Start Guidance
button to apply
the detoured sections and search other
routes.
06
Check the information and press the
Detour button.
Menu I 6-11
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-11
2016-11-04 오후 3:03:1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : FEEL-6
Create Date                     : 2017:05:17 13:00:18+09:00
Modify Date                     : 2017:05:17 13:00:22+09:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:05:17 13:00:22+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Creator                         : FEEL-6
Document ID                     : uuid:d6be3b41-3b9c-423f-99d9-7b9b8c602560
Instance ID                     : uuid:bb859c48-5ba4-4efc-a077-ba883ab0bb1f
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 88

EXIF Metadata provided by EXIF.tools