HYUNDAI MOBIS ADC31A9AN-1 Car Audio System User Manual

HYUNDAI MOBIS CO., LTD. Car Audio System Users Manual

Users Manual

CAR MULTIMEDIA SYSTEM USER'S MANUAL
Read the following safety precautions for your safetyBefore using the product, read the contents of this user's manual carefully and use this product safely.※ The design and specifi cations of this product may change without prior notifi cation for product and service improvement.The actual features in the vehicle may differ from the illustrations.For more accurate information about the vehicle, please refer to the catalogue.※ This Audio system contains open source software, including without limitation, software distributed and/or modifi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999. For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.krNotations used within this User's Manual WARNING• Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. CAUTION• Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safetyi Information• Information and tips that provide additional user convenience in using the product NOTICE• Information on specific features that facilitate proper product use and functional understanding• Information on terminology used within this manual
iPod®iPod® is a registered trademark of Apple Inc.Bluetooth® Wireless TechnologyA compatible Bluetooth® Wireless Technology-enabled cell phone is required to use Bluetooth® Wireless Technology.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license.Other trademarks and trade names are those of their respective owners.A Bluetooth® enabled cell phone is required to use Bluetooth® Wireless Technology.Bluetooth® Wireless Technology phone compatibility can be checked by visiting http://www.kia.com.Wi-Fi®The Wi-Fi CERTIFIED™ Logo is a certifi cation mark of Wi-Fi Alliance.
Warnings and CautionsKey Product FeaturesComponent Names and FunctionsStarting the System for the First Timepart.1 Basic
1-2 I Basic Safety Warnings• Do not stare at the screen while driving. Staring at the screen for prolonged peri-ods of time could lead to traffic accidents.• Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock.• Heed caution not to spill water or intro-duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.• If you use phone related functions while driving, you will find it difficult to concen-trate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked.• Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-function. Continued use in such con-ditions could lead to accidents (fires, electric shock) or product malfunctions.• Do not touch the antenna during thun-der or lightening as such acts may lead to lightning induced electric shock.• Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.• For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for man-ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)• Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked. Basic
Warnings and Cautions I 1-301 Safety CautionsPay attention to traffic conditions while driving. • Operating the device while driving could lead to accidents due to a lack of atten-tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-cle is in motion. The touch screen fea-ture will be supported once the vehicle has stopped.• Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.• Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-ment. (Adjust the volume to a suitable levels before turning off the device.)• If you want to change the position of device installation, please inquire with your place of purchase or service main-tenance center. Technical expertise is required to install or disassemble the device.• Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.• Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.• Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.• When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.• Prevent caustic solutions such as per-fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.
1-4 I BasicKey Product FeaturesThis device is a Multimedia system equipped with a multifunc-tional player that supports Radio (FM, AM), SiriusXM™, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.DisplayWide TFT-LCD Display• Provides high quality video through a Wide TFT-LCD Display using an LED Back Light.• Touch screen for maximum user convenience.RadioDigital Tuner Feature• Digital Tuner using PLL method that supports memory of 40 broadcast stations.Radio broadcast station name• Displays broadcast station names.MultimediaPlayerSupport for various Media Formats• Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth® Audio Streaming modes My Music• Supports copying of music stored within USB devices into My Music (internal memory) modeMiscellaneousBluetooth® Wireless Technology• Convenient use of Bluetooth® Handsfree by using buttons within the steering wheel controlDigital Screen Control Features• Easy control of features through touch screen optionsSteering Wheel Control• Control over audio features, voice recognition and Bluetooth® through the steering wheel control for maximum convenience
Component Names and Functions I 1-501Component Names and FunctionsHead UnitName DescriptionRADIOSelects FM/AM/SiriusXM™ mode• Each time this is pressed, the mode is changedin the following order: FM → AM → SiriusXM™ → FM.MEDIASelects MEDIA mode.• If the media is not connected MEDIA mode willnot be activated.TRACKSEEKWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: Plays the previous/next fre-quency.• SiriusXM™ mode: Changes the channel.• MEDIA (USB/iPod/My Music) mode: Changesthe track, file or title (except for USB Image andAUX).When pressed and held down (more than 0.8 sec-onds),• FM/AM mode: Continuously changes the fre-quency until the key is released.• MEDIA (USB/iPod/My Music) mode: Rewindsor fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX). POWER/VOL • When power is off, press to turn power on.• When power is on, press and hold (more than0.8 seconds) to turn the power off.• When power is on, press quickly (less than 0.8seconds) to turn Audio off.• Turn left/right to adjust the volume.Name DescriptionPHONEDisplays the Bluetooth phone mode.APPS/Moves to the Apps/Info screen.UVOMoves to the UVO modeSETUPMoves to the Setup screen. TUNE• FM/AM mode: Changes the frequency.• SiriusXM™ mode: Changes the channel.• MEDIA (USB/iPod/My Music) mode: Changesthe track, file or title (except USB Image,Bluetooth Audio, and AUX).RESET Resets the system settings. (Preset radio channelsand other data will not be deleted)※ The actual feature in the vehicle may differ from the illustration.
Component Names and Functions I 1-701Name DescriptionWhen pressed quickly (less than 0.8 seconds),• Activates voice recognition.When pressed and held (more than 0.8 seconds),• Ends voice recognition.• If iOS device is connected through Bluetooth,activates or ends Siri Eyes Free.MODE• Each time this is pressed, the mode is changed in the following order: FM → AM → SiriusXM → USB or iPod → AUX → Bluetooth Audio → My Music →→ FM• If the media is not connected, the correspondingmodes will be disabled• Press and hold (more than 0.8 seconds) to turnthe Audio system on/off• When power is off, press button to turn powerback onVOL +VOL -Controls the volumeWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: searches broadcast frequenciessaved to Presets• SiriusXM™ mode: searches broadcast channelssaved to Presets• MEDIA (USB/iPod/My Music) mode: changes thetrack, file or title (except USB Image, AUX)When pressed and held (more than 0.8 seconds),• FM/AM mode: automatically searches broadcastfrequencies• SiriusXM™ mode: automatically searches broad-cast channels• MEDIA (USB/iPod/My Music) mode: quicklylooks up songs (excluding USB images, AUX and Bluetooth audio files)Steering Wheel ControlsName DescriptionWhen pressed quickly (less than 0.8 seconds),• When pressed in the dial screen, makes a call• When pressed in the incoming call screen,answers the call• When pressed during call waiting, switches towaiting call (Call Waiting)When pressed and held (more than 0.8 seconds),• When pressed in Bluetooth® Hands-free, redialsthe last dialed call• When pressed during a Bluetooth® Hands-freecall, switches call back to mobile phone (Private)• When pressed while calling on the mobile phone,switches call back to Bluetooth® Hands-free (operates only when Bluetooth® Hands-free is connected)• When pressed during a call, ends the phone call• When pressed in the incoming call screen, rejectsthe call※ The actual feature in the vehicle may differ from the illustration.
Starting the System for the First Time I 1-901Starting the System for the First TimeTurning the System On/OffPress the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean, select the Language button. NOTICE• You cannot operate the system while it isbooting up. It may take some time for all offeatures of the system, particularly the voicerecognition system, to be ready for use.Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver.i Information • If you turn off the system during a phone callusing the Hands-free feature, then the call willautomatically switch to your mobile phone. NOTICE• Check the volume when turning on thesystem. Before turning on the system, adjustthe volume to a reasonable level.System ResetThe System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.)
1-10 I BasicBattery Warning MessageAlways use the system while the car engine is running. If you turn on the sys-tem while the engine is off, a battery warn-ing message will appear. When the engine starts, the message will disappear. NOTICE• If you use the system for a long time with the engine off, the battery may become completely discharged.Restrictions on Features for Safety MeasuresSeveral features are limited while driving.The restriction screen will disappear when shifting gears into P or putting the parking brake on. WARNING- Blank Screen• Refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fi res, electric shock). WARNING- Touching the Antenna During A Thunder Storm • Do not touch the antenna during thunder or lightning as such acts may lead to lightning induced electric shock.
Starting the System for the First Time I 1-1101Home ScreenControls Menu Confi guration for the Home ScreenTap the icon on any screen to display the Home Screen below.Features Description Radio/Media Widget• Shows brief information on the radio or media that is now playing.• Tap the area to move to the mode that you are listening to. Connectivity WidgetShows any connected devices such as iPod, and Bluetooth. All Menus Shows all of the items in the system menu. My Menu• You can add up to eight menus here.• Add your favorite menus to have quick and easy access to them. Apps/Info Moves to the Apps/Info screen. Setup Moves to the Setup screen.Information Display on the Status BarDisplays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-tem status details and events.Icon DescriptionDisplayed when the audio is muted.Displays the remaining battery of the Bluetooth phone.Displayed when connected to Bluetooth for handsfree.Displayed when connected to Bluetooth for streaming audio.Displayed when connected to Bluetooth for streaming audio and handsfree.Displayed when downloading contacts or recent calls from the Bluetooth phone.Displayed while on a call with the Bluetooth phone.Displayed when the microphone of the Bluetooth is muted.Displays the signal strength of the Bluetooth phone.Displayed when connected to Wi-Fi.Displayed when connecting to Wi-Fi.Displayed when 911 connect is available.
1-12 I BasicAdding Your Favorite Menu Items to My MenuFrom the Home screen, select My Menu icon, and then Edit.From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left.To remove the item from My Menu, drag item from the left and drop them on the right.i Information • Up to eight items can be added to My Menu.On-Screen Touch ControlsLearn how to touch the screen to operate the system. SelectTap lightly on a menu or an item to select it. NOTICE• The system will not recognize your touch if you wear a glove or other non-conductive material. Touch the screen using your fi nger, an electrostatic touch-screen glove, or a stylus pen.Drag & DropSelect a menu or item you want, then drag and drop it to where you want to place it.Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from.
Starting the System for the First Time I 1-1301Drag the frequency bar to the left or right to move to the frequency that you want. From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu.Flick (Quick Scrolling)Quickly moves up and down in the list. NOTICE• Moving the list when there are many items will display a handler on the right of the display. You can easily move many items at a time with the handler.You can view the previous or next image by flicking left/right on an image on the USB Image screen.Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available.
1-14 I BasicPress and HoldPressing the and buttons in the music player will fast forward/rewind the music.
FM/AM (with HD Radio™)HD Radio™ Technology (if equipped)FM/AMSiriusXM™USBiPodAUXBluetooth® AudioMy Musicpart.2 Radio/Media
2-2 I Radio/MediaFM/AM (with HD RadioTM)You can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen.FM/AM Mode Display Controlsi Information• If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode.• If you are in radio mode, select the media widget from the Home screen to access the radio player.Features Description PresetFrequencies• The stored preset frequencies are displayed for user selection.• After selecting frequency, press and hold the preset button for more than 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button.• Flick the preset frequencies up/down to scroll quickly through presets. Frequency Bar• Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel.• Dragging: Drag the frequency bar to the left/right to find the radio channel that you want. Frequency Displays the current frequency. Ta gSaves the current music’s tag information to the head unit. If connected to iPod, the tag informa-tion can be saved on the device. Presets Shows the stored presets for user selection. Menu• ListMoves to the frequency list.• InfoTurns the Radio text information transmitted from the broadcasting station on and off.• Preset ScanPlays preset frequencies for 10 seconds per item.• Sound SettingsMoves to the Sound Settings.Radio/Media
02FM/AM (with HD Radio™) I 2-3Features Description Scan/Preset ScanDisplays an active mode from Scan and Preset Scan modes. Band Changes to the desired band from among FM, AM, and SiriusXM. HD Radio (if equipped)Used to set whether to turn HD Radio™ recep-tion On or Off. ScanShortly plays the broadcasts for the frequen-cies with superior reception for 5 seconds per item. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Seeks the previous/next frequency.• When pressed and held (more than 0.8 sec-onds): Moves quickly through all of the fre-quencies. The moment that you release thebutton, the system seeks the next availablefrequency. TUNETurn the TUNE knob to manually seek avail-able frequencies.• FM: Increment/decrement by 200 kHz• AM: Increment/decrement by 10 kHz
2-4 I Radio/MediaIf an HD Radio™ broadcast is received, the radio mode will switch from analog broadcast to HD Radio™ broadcast.i Information• The HD Radio™ screen is displayed only when a HD Radio™ broadcast is being received.Program Service Data: Contributes to the superior user experience of HDRadio™ Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, origi-nal music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio™ Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.HD Radio™ Technology (if equipped)
HD Radio™ Technology (if equipped) I 2-502HD Radio™ Mode Display ControlsName Description HD Radio™ Reception & Channel buttonsDisplays main HD Radio™ channels and used to directly select the current available channels. The HD Radio™ related icon display becomes active within regions where an HD Radio™ signal can be received. HD Channel Number Analog station and corresponding HD Radio™ channel number saved in the pre-set list. HD Broadcast InfoDisplays detailed information about the cur-rent broadcast (the details of the information shown are different depending on whether the Info button is selected) HD RadioWhen the HD Radio™ soft button is ON (the red indicator on the HD Radio™ button is illuminated), HD Radio™ signals will be received.
2-6 I Radio/MediaFM/AMYou can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen.FM/AM Mode Display Controlsi Information• If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode.• If you are in radio mode, select the media widget from the Home screen to access the radio player.Features Description PresetFrequencies• The stored preset frequencies are displayed for user selection.• After selecting frequency, press and hold the preset button for more than 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button.• Flick the preset frequencies up/down to scroll quickly through presets. Frequency Bar• Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel.• Dragging: Drag the frequency bar to the left/right to find the radio channel that you want. Frequency Displays the current frequency. Presets Shows the stored presets for user selection. Menu• ListMoves to the frequency list.• Preset ScanPlays preset frequencies for 10 seconds per item.• Sound SettingsMoves to the Sound Settings.
FM/AM I 2-702Features Description Scan/ Preset ScanDisplays an active mode from Scan and PresetScan modes. Band Changes to the desired band from among FM, AM, and SiriusXM. Info Turns the Radio text information transmitted from the broadcasting station on and off. Scan Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Seeks the previous/next frequency.• When pressed and held (more than 0.8 sec-onds): Moves quickly through all of the fre-quencies. The moment that you release thebutton, the system seeks the next availablefrequency. TUNETurn the TUNE knob to manually seek avail-able frequencies.• FM: Increment/decrement by 200 kHz• AM: Increment/decrement by 10 kHz
2-8 I Radio/MediaSiriusXM™You can access the radio player either by pressing the RADIO key or by selecting the Radio menu option from All Menus on the Home screen. Select the SiriusXM™ band from the radio player.SiriusXM™ Mode Display Controls i Information• If you press the RADIO key when the power is off, the power will turn on and a radio broadcast will be tuned from the current mode.• If you are in the SiriusXM™ mode, select the SiriusXM™ radio widget from the Home screen to access the radio player.• When the power is off, pressing the RADIO key will turn the power on and play a SiriusXM™ Radio broadcast.Features Description Preset Frequencies• Shows the stored presets for user selection.• After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Channel Logo Displays the current channel logo. Channel Info Displays the current channel number and name. Content Info Displays the artist, title and other information about the current playing song. Category Info Displays the category of the currently playing song. Band Changes to the desired band from among FM, AM, and SiriusXM. Direct Tune Used to search for the desired channel by entering the channel number. Scan Plays all receivable channels for 10 seconds per item. Category Lock If pressed, only the channels for the current category can be searched or scanned. Category Selection Buttons Used to select the previous/next category. Play Live Switches to the live broadcast mode. Skip BackwardRepeats the previously broadcasted program.• Holding for less than 0.8 seconds: Moves to the previous segment.• Holding for more than 0.8 seconds: Moves to the previous 5 seconds.
SiriusXM™ I 2-902Features Description Play/Pause Pauses/plays the current broadcasting program. Skip Forward Moves to the next segment. Ta gSaves the current music’s tag information to the head unit. If connected to iPod, the tag informa-tion can be saved on the device. Presets Shows the stored presets for user selection. List Moves to the channel list. Menu• What is on My Presets?The program schedule saved in my preset. (For more details, see Section 3.10. Viewing Menu.)• Featured FavoritesTheme channels recommended by SiriusXM™.(For more details, see Section 3.10. Viewing Menu.)• Preset ScanPlays preset channels for 10 seconds each.• Sound SettingsMoves to the Sound Settings. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Plays the previous/next channel.• When pressed and held (more than 0.8 sec-onds): Continuously changes the channeluntil the key is released and plays the currentchannel. TUNE Changes the channel.
2-10 I Radio/MediaSelecting through Channel/Category ListSelect the List ▶ Select the desired cat-egory and channel.Select the desired category and the chan-nel. Once selected, the previous screen will be restored and the selected channel will begin playing.If you select the Skip button, you can scan channels using the SEEK TRACK key or the TUNE knob by skipping the channels that you chose to skip. Direct TuneEnter the number of the channel you want to receive.Viewing MenuUsing the Menu button on the right, you can view the program schedule and infor-mation about the Featured Favorites pro-vided by SiriusXM™.
SiriusXM™ I 2-1102What is on My Presets? (Program Schedule)You can select Menu to see program information and the sched-ules of broadcast channels listed in the presets. Name Description ChangeBroadcast DateBy selecting this option, you can select a broad-casting date.Broadcast information will be provided for one week from the current date. PresetShows saved presets for user selection A total of 40 frequencies for SiriusXM™ modes can be displayed. ProgramInformationShows you the program titles to be broadcasted at the time that you have chosen.Select a program to see more details. If there is more information on the program you selected, an arrow button will be displayed on the right of the list. You can see more program information by selecting the arrow button.
2-12 I Radio/MediaFeatured FavoritesFeatured Favorites feature allows SiriusXM™ to broadcast additional presets.• Example 1: “Martha’s Favorites” may represent Martha Stuart’s favorites pre-sets on her radio. • Example 2: During holidays, “Holiday Music” may represent all the SiriusXM™ channels that are playing the holiday music for easy access by users. Multiple sets Featured Favorites data can be broadcast by SiriusXM™ and can change from time to time.
USB I 2-1302USBBefore Playing a USB MP3Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.• Files that are not standard format music/image files will not be played.• For MP3/WMA/OGG files, only music files with compression rates between 8Kbps ~ 320Kbps can be played.• Heed caution to static electricity when connecting/disconnecting external USB devices.• Encoded MP3 Players will not be recognized when connected as an external device.• When connecting an external USB device, the device may not properly recognize the USB is in some states.• Only products formatted with byte/sectors under 64Kbyte will be recognized.• USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-tem, are recommended. File systems other than FAT12, FAT16, FAT32, exFAT, and NTFS are not supported.• Some USB devices may not be supported due to compatibility issues.• Take caution so that the USB connector does not come in con-tact with body parts or objects.• Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction.• Make sure to connect/disconnect external USB devices with the audio power turned off.• The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB.• The use of USB devices for purposes other than playing music and image files is prohibited. • Do not use the USB I/F to charge batteries or USB accessories that generate heat. Such acts may lead to worsened perfor-mance or damage to the device.• The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle.• When using mass storage USB devices with separate logical drives, only files saved to the root drive can be played.• When application programs are installed to specific USBs, files may not properly play.
2-14 I Radio/Media• The device may not operate normally if MP3 Players, cellu-lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device.• Charging through the USB may not work for some mobile devices.• The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory.• The device may not support normal operation when using for-mats such as HDD Type, CF, or SD Memory.• When playing iPods, please use a dedicated iPod car cable. • Normal operation cannot be guaranteed when other cables are being used.• The device will not support files locked by DRM (Digital Rights Management).• USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized.• Only use Plug type connector products, as shown in the figure below.• To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con-sole storage (if equipped) is for charging only.Product Name Manufacturer XTICK LG BMK BMK Technology SKY-DRV Sky Digital TRANSCEND JetFlash Transcend Sandisk Cruzer SanDisk Micro ZyRUS ZyRUS NEXTIK Digiworks i Information• Problems that occur through use of USB devices not listed within the above table are not covered by the product warranty.Plug Type Connector
USB I 2-1502Supported USB MP3 music specifi cationsName DescriptionMP3 File Specification Specification: MPEG1 AUDIO LAYER 3Recommended Bit Rates and Sampling FrequencyAcceptable sampling frequency: 32, 44.1, 48 (kHz)Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)96, 128, 192 Kbps fixed bit rate/44.1kHzID3 Tag Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tagsDetailed Specifications Maximum directory layers: 20 layersMaximum length of folder name/file name: 255BytesSupported characters for folder name/file name: Alphanumeric characters, Korean standard charac-ter set 2,350 characters, Simplified Chinese 4888 charactersMaximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored ontoone USB: 8000i Information• The sound quality of MP3 files that use bitrates exceeding 192 Kbps cannot be guaranteed. When using fi les without fi xed bit rates, some features (FF/REW features) may not properly operate.Supported Image Specifi cationsName DescriptionImage format JPG, GIF, BMP, PNG (animated GIF, etc. are not supported)Supported image file size5M pixels for JPG, BMP, PNG (1M pixels maxi-mum for GIF)
2-16 I Radio/MediaUSB Music Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files within the USB Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the current operating function Play Time Displays the current play time/total play time Song InfoDisplays the information of the current track• When a track in the file tab on the list screen is selected: Displays folder, file, title, artist, album info• When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button Converts to basic mode screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)• If play time is less than 3 seconds, moves to previous file• If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds): Moves to the next file• If button is pressed (more than 0.8 seconds): It fast-forwards the track RepeatRepeats the current file• If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song, repeating folder, and turning repeat off• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-ing one song and turning repeat off ShufflePlays files in random order• If select the song in the file tab on the list screen: Select the Shuffle button to switch between Shuffle Folder, Shuffle All, and turn-ing shuffle off • If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Shuffle button to switch between Shuffle Category and turning shuffle off
USB I 2-1702Features Description ScanScans the beginning parts of USB files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between Scan Folder, Scan All, and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between Scan category and turning scan off Menu • Add to Playlist: Add the current track to thePlaylist: Playlist is placed on the left tab in thelist• Save to My Music: You can save the currenttrack to My Music. You can play saved trackfrom My Music without USB. Access to MyMusic in the Media mode.• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, select the TUNE knob to play the track. If the TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
2-18 I Radio/MediaFeatures Description Folder/ Category Name Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen Upper Folder/ Category Moves to Upper FolderFeatures Description Menu • Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a desired trackand press “Add to Playlist” to add the track inthe playlist.• Delete from Playlist: Select a track you want todelete from the playlist and press “Delete fromPlaylist” to delete the track in the playlist• Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file)• Save to My Music: Stores the music. Thestored music can be played in My Music. (Thisfunction is not provided in Playlist.) Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. TUNETurn the TUNE knob to move the focus to the previous/next list. If the desired track is displayed, press TUNE knob to play the track.
USB I 2-1902USB Image Mode Display ControlsFeatures Description Mode Displays the current operating mode Folder/File Name Displays folder name where image is located File Index Shows the current file/total files within the USB Slideshow Images as slideshow in 5, 10, 20, 30 second intervals Rotate Rotate image in clockwise direction Info Shows the file name, resolution and file type of current image Adjust Image Size Enlarge/reduce (zoom-in/zoom-out) image size List Moves to the list screen Previous/Next imageSwipe image left or right to see Previous/Next image
2-20 I Radio/MediaFeatures Description Current File Displays the current playing file name Back Button Converts to basic mode screen MenuNow Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the cur-rent list includes the current file) SEEK/TRACKControls background mode• Radio mode: Changes Frequency and Channel• Media mode: Changes Track (excluding AUX) TUNEControls background mode• Radio mode: Changes Frequency and Channel• Media mode: Changes track (excluding AUX). If a desired track is displayed, press the knob to move to the track.
iPod I 2-2102iPodUsing iPod Devices• iPod is a registered trademark of Apple Inc.• iPod mode will not operate if the con-nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop-erly operate with the Multimedia system.• For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use. • Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system.• If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual)• If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in a short time, it may cause abnormal operation. • The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version.• For some iPod Touch and iPhone devices, connecting Bluetooth® while the iPod is operating may result in discon-tinued iPod sound. When such devices with Bluetooth® support are connected, this problem occurs as the sound source is changed from the Dock Connector (USB connector cable) to Bluetooth.• To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec-tion or Bluetooth Audio with Bluetooth connection.• To listen to the iPod sound, reconnect the USB cable or change the audio out-put settings in iPod/iPhone to Dock.• In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products)※ During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/iPhone product.) will charge the iPod through the head unit.※ ※ The use of genuine iPod cables sup-The use of genuine iPod cables sup-plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.)noise or abnormal operation.)※ To play iPod music through cable con-nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
2-22 I Radio/Media• When connecting with the iPod cable, make sure to fully insert the jack to pre-vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/paused.• Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again.• When connecting to iPod Nano/Classic, the Kia Motor logo appears on the Apple device. For the iPod Nano 6 genera-tion, however, the logo image does not appear since it is not supported. Also, all iPhone and iPod Touch products do not support this function.• In Apple’s iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications spe-cifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the iPod mode.• If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode.• The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con-nected device.
iPod I 2-2302 Caution• While using a connected iPhone/iPod Touch device, it may not operate nor-mally if the user changed some func-tions in the device. • When calling with an iPhone connec-tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status. • If lots of songs have the same informa-tion, skipping may occur when previous/next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version.• If lots of songs have the same informa-tion, the song that plays may be differ-ent between the system and the Apple device. Reset the device or delete the same songs in the Apple device using iTunes. • If you control pause, repeat, shuffle, or seek songs when the play time is less than 3s before the song is finished play-ing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device. • We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related issues. Type 1G 2G 3G 4G 5G 6G 6.5G 7GiPod Mini Not SupportediPod Shuffle Not SupportediPod Nano ○ ○ ○○○ ○Not released ○iPod Touch○(iOS 1.1 not sup-ported)○ ○○○ Not releasediPad ○ (Unable to charge, Not verified, Normal working not guaranteed)iPad Mini ○ (Unable to charge, Not verified, Normal working not guaranteed)iPod Classic Not Supported ○(iPod with Video)○(iPod Classic)○(iPod Classic)Not releasedType 3G 3GS 4 4S 5 5C 5S 6 6+iPhoneNot verified, Normal working not guaranteed○○○○○○○○
2-24 I Radio/Media Caution• If the iPhone/iPod Touch supports Bluetooth, the Apple device will not be able to use the Bluetooth function if the device is connected through both the USB port and via Bluetooth. Disconnect the USB connection then use Bluetooth Audio.• If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode.• If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys-tem, it may occur sound will not output in iPod mode due to iPod/iPhone’s fea-ture. Especially, if you use AUX cable like pictures, this problem may occur. • Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to “Dock” in iPod/iPhone.• If connect to the Multimedia system while podcast or iTunes music down-loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted.• If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual)• iPhone and iPod Touch devices are guaranteed to work normally on iOS 9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested.
iPod I 2-2502iPod Mode Display ControlsFeatures Description Mode Displays the current operating mode Song Index Shows the current song/total songs Repeat/Shuffle From Repeat/Shuffle, displays the current oper-ating function Play Time Displays the current play time/total play time Song Info Displays the artist/song title/album info List Moves to the list screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)• If play time is less than 3 seconds, moves to previous file• If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds): Moves to the next file• If button is pressed (more than 0.8 seconds): It fast-forwards the track Repeat Repeats the current fileSelect the Repeat button to switch between repeating 1 track, and turning repeat off ShufflePlays files in random orderWhen selecting the Shuffle button, it changes to shuffle category → deactivate shuffle then repeat• Shuffle Category: Shuffle song in the current category Back Button Move to home/previous mode screen Menu Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.
2-26 I Radio/MediaFeatures Description TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track. If the TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
iPod I 2-2702Features Description Category Name Displays the category name Category ListDisplays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Category Moves to Upper Category Search MenuSearch tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewindor fast-forward the track. TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track.If you do not anything with the knob for 5 seconds, the TUNE knob search will be terminated.
2-28 I Radio/MediaAUXConnecting an External DeviceIf an external device connector is con-nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.• AUX mode can be used only when an external audio player has been con-nected.• The AUX volume can also be controlled separately through the connected device. NOTICE• If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.• When the external device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use.※ The actual feature in the vehicle may differ from the illustration.
02Bluetooth® Audio I 2-29Bluetooth® AudioBluetooth Audio Mode Display ControlsFeatures Description Mode Displays the current operating mode Phone Name Displays name of connected phone Artist Info Name of current artist Features Description Title Name of current song Previous File• If play time is less than 3 seconds, moves tothe previous file• If play time is more than 3 seconds, plays thecurrent file from the beginning This function may differ depending on themodel of mobile phone. Play/Pause Plays/Pauses Bluetooth Audio Next File Moves to the next file RepeatRepeats the current file. This function may differ depending on the model of mobile phone. ShufflePlays files in random order. This function may differ depending on the model of mobile phone. Menu• Connections: Moves to the Bluetooth Settingsscreen. You can pair a new device or change/delete paired device(s).• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. SEEK/TRACK Plays the previous/next file TUNE TUNE is not supportedi Information• Artist info and Title may not be supported by mobile phone
2-30 I Radio/MediaBluetooth Connection SettingsSettings for pairing, connection and dis-connection of a Bluetooth device.• In Bluetooth Audio play screen, select Menu and then Connections.i Information• If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones. • Please check the Bluetooth compatibility in below website: KIA Motors Corporation http://www.kia.com
My Music I 2-3102My MusicMy Music Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the cur-rent operating function Play Time Displays the current play time/total play time Song InfoDisplays the information about the current track• When a track in the file tab on the list screen is selected: Displays file, artist, title, album info• When a track in the other tab on the list screen is selected: Displays artist, title, album infoFeatures Description List Moves to the list screen Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)• If play time is less than 3 seconds, moves to previous file• If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File • If button is pressed (less than 0.8 seconds): Moves to the next file• If button is pressed (more than 0.8 seconds): It fast-forwards the track RepeatRepeats the current file• If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song and turning repeat off.• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-ing one song and turning repeat off
2-32 I Radio/MediaFeatures Description ShufflePlays files in random order• If select the song in the file tab on the listscreen: Select the Shuffle button to switch between shuffle and turning shuffle off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Shuffle button to switch between shuffle and turning shuffle off Scan Scans the beginning parts of files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between scan and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between scan and turning scan off Menu • Add to Playlist: Adds the current song to thePlaylist: Playlist is placed on the left tab in the list• Delete Current File: Deletes the current trackfrom My Music.• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of the sound. TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track. If the TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
My Music I 2-3302Features Description Folder/ Category Name Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen Upper Folder Moves to Root FolderFeatures Description Menu• Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a track andpress “Add to Playlist” to add the track in theplaylist• Delete from Playlist: Select a track from theplaylist and press “Delete from Playlist” todelete the track in the playlist•Delete Files: Deletes files from My Music If delete file from My Music, the informationrelated to song also deleted in the list.• Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. TUNETurn the TUNE knob to move the focus to pre-vious/next file. If the file you want to play is dis-played, press TUNE knob to play the track. If the TUNE knob is not pressed within 5 seconds of searching tracks, Tune search will be terminated.
MEMO
Before Using the Bluetooth® HandsfreeBluetooth ConnectionBluetooth Phonepart.3 Bluetooth
3-2 I Bluetooth Before Using the Bluetooth® HandsfreeWhat is Bluetooth® Wireless Technology?• Bluetooth® Wireless Technology refersto a short-distance wireless network-ing technology which uses a 2.45GHzfrequency to connect various deviceswithin a certain distance.• Supported within PCs, external devices,Bluetooth® phones, PDAs, various elec-tronic devices, and automotive environ-ments, Bluetooth® Wireless Technologyto be transmitted at high speeds withouthaving to use a connector cable.• Bluetooth® Handsfree refers to a devicewhich allows the user to convenientlymake phone calls with Bluetooth®mobile phones through the Multimediasystem.• The Bluetooth® Handsfree feature maynot be supported in some mobile phones. For more information on mobile phonecompatibility, visit the KIA Motor website- KIA Motors Corporation: http://www.kia.com WARNING- Distracted Driving• Focus on the road while driving. The driver'sprimary responsibility is in the safe and legaloperation of the vehicle. Drivers should notuse any hand held devices or other equipment or vehicle systems that distract the driverduring vehicle operation.• Do not stare at the multimedia screen for long periods of time while driving. Staring at thescreen for prolonged periods of time can leadto traffi c accidents and can result in personalinjuries.Precautions for Safe Driving• Bluetooth® is a feature that enables driv-ers to make handsfree calls. Connectingthe head unit with a Bluetooth® phoneallows the user to conveniently makecalls, receive calls, and manage thephonebook. Before using Bluetooth® Wireless Technology, carefully read thecontents of this user’s manual.• Excessive use or operations while driv-ing may lead to negligent driving prac-tices and be the cause of accidents. Donot operate the device excessively whiledriving.••Viewing the screen for prolonged peri-Viewing the screen for prolonged peri-ods of time is dangerous and may leadods of time is dangerous and may leadto accidents. When driving, view theto accidents. When driving, view thescreen only for short periods of time.screen only for short periods of time.Bluetooth
03Before Using the Bluetooth® Handsfree I 3-3CAUTIONS upon Connecting Bluetooth® Phone• Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth® features.• Even if the phone supports Bluetooth® Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth® power is turned off. Disable the hidden state or turn on the Bluetooth® power prior to searching/connecting with the head unit.• If Auto Connection is used, the Bluetooth® phone is automatically con-nected when the ignition is turned on, making it unnecessary to have to con-nect the phone with the head unit every time.• If you do not want automatic connection with your Bluetooth® device, turn the Bluetooth® feature off of the Bluetooth® device.• Park the vehicle when connecting the head unit with the mobile phone.• Bluetooth® connection may become intermittently disconnected in some mobile phones. Follow these steps to try again.1. Turn the Bluetooth® function within the mobile phone OFF/ON and try again.2. Turn the mobile phone power OFF/ON and try again.3. Completely remove the mobile phone battery, reboot, and then again.4. Reboot the Multimedia System and try again.5. Delete all paired devices from both of Phone and Head Unit sides and then try again.• The Handsfree call volume and quality may differ depending on the mobile phone.• Pairing Bluetooth® devices and use of other Bluetooth® features are not sup-ported when the vehicle is in motion. For safety, please first park your vehicle. • If you continue having issue download-ing your contacts to your vehicle, con-tact your mobile phone provider.
3-4 I Bluetooth Bluetooth ConnectionPairing a New DeviceBefore you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car.Up to 5 Bluetooth devices can be paired.Only one Bluetooth device can be con-nected at a time.Pairing a New Device by Selecting Phone/CallPress the PHONE key or key in the steering wheel control. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.Pairing a New Device Through thePhone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select Add New. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authoriza-tion popup. ▶ Connect Bluetooth.The default passkey is 0000.The vehicle name above is an example. Check the actual information on the product.Connecting Bluetooth DevicesConnects the Bluetooth devices that you add.Connecting Devices by Selecting Phone/CallPress the PHONE key or key in the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.
Bluetooth Connection I 3-503Connecting Devices Through the Phone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.Disconnecting Bluetooth DevicesDisconnects Bluetooth devices that are connected.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select the name of the device to disconnect.Deleting Bluetooth DevicesDeletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select Delete Devices. ▶ Select the device name to delete. ▶ Select Delete.
3-6 I Bluetooth Bluetooth PhonePhone Status IconsShows the current phone status in the right top of the display.Icons DescriptionYou can use Bluetooth phones when a Bluetooth Hands-free connection is established.You can use Bluetooth audio features when a Bluetooth audio connection is estab-lished.You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.Call signal strength indicatorBattery level of the Bluetooth devices connectedDownloading Call History listDownloading ContactsIn a Bluetooth phone callMicrophone mutedi Information• The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. • The battery level may differ from the actual level remaining.
Bluetooth Phone I 3-703DialDials a call after the Bluetooth devices are connected.• Press the PHONE key or key in the steering wheel control. • You can also select All Menus icon, and then Phone icon.Name Description KeypadUse the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone CallMakes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again. Settings Moves to a screen of Phone Settings. Delete Deletes the numbers that you entered.i Information• Some types of mobile phones may not support the Speed Dial function.Accept/Reject CallIf there is an incoming call after you made a Bluetooth connection, a popup message will appear.Name Description Accept Answers the call. Reject Ignores the call.i Information• In some mobile phones, the caller's number may not be displayed, and the Reject feature may not be supported.
3-8 I Bluetooth Using the Menu During a Phone CallWhen making a call, you can use the fol-lowing menu items.Name Description Use PrivateSwitches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts Displays the Contacts list. Outgoing VolumeDisplays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering ARS numbers. SwitchSwitches to a call on hold, if any. You can also switch calls by select-ing the number in the Information Display. The Switch function switches the current call to a wait-ing call in order to answer a new incoming call.i Information• If the caller's number is listed in Contacts, the caller's name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed.• In some Bluetooth devices, the Use Private feature may not be supported. • In some Bluetooth devices, the Switch feature may not be supported.• During a phone call on a Bluetooth Hands-free, you cannot access other modes, such as Radio and Settings. • Depending on handset types, the in-call volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume.
Bluetooth Phone I 3-903Call HistoryPress the PHONE key, and then Call History.Name Description All Lists the all call history. Dialed Lists the calls that you made. Received Lists the calls that you have received. Missed Lists the calls you missed. Call HistoryDisplays all of your call history. Select from the list to dial the number. DownloadDownloads the call history information from your mobile phone.i Information• In some mobile phones, call records may not be added to your Call History.• Calls from restricted ID's are not added to your Call History Information.• Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list.• The durations of each dialed/received call are not displayed in your car's Call History list.• While the call history download is in progress, the status bar displays an icon ( ).• If the call history download is turned off on the Bluetooth device, the call history download will fail.• Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.• Some devices do not support call history download. Check if your Bluetooth device supports download feature. For details regarding Bluetooth-supported devices and their functional compatibility, visit http://www. kia.com
3-10 I Bluetooth ContactsPress the PHONE key, and then Contacts.Name Description Contacts ListThe list of Contacts. Select from the list to dial the number. Download Downloads contacts from your mobile phone. Search Searches Contacts.i Information• Up to 5000 phone numbers can be downloaded from a single, paired Bluetooth device.• You cannot edit or delete downloaded phone numbers from your car.• Contacts can be viewed only when the Bluetooth device is connected.• Even if the Bluetooth device is disconnected, the downloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data)• Downloaded phone numbers may be lost depending on the condition of the head unit. Keep your important data in a safe place.• Contacts from both the SIM card and your mobile phone are downloaded at the same time by default.• The status bar displays a ( ) while downloading contacts.• The download will not be available if the contacts download function is turned off on your Bluetooth device.• Some devices require a device authentication for downloading your contacts. If download fails, check your phone screen and confirm the download if necessary.• Some devices do not support contacts download feature. Check if your Bluetooth device supports contacts download. For Bluetooth supporting devices details and compatibility, visit http://www.kia.com
Bluetooth Phone I 3-1103FavoritesPress the PHONE key, and then Favorites.Name Description FavoritesLists the phone num-bers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. Delete ItemsDeletes numbers that you select from Favorites. Delete All Deletes all of the num-bers from Favorites.
MEMO
The 911 Connect feature may not operate in the following situationsAbout UVO eServicesBefore using UVO eServices Connecting BluetoothPair a device from Bluetooth-enabled phoneConnecting to smartphone via USB911 ConnectRoadside AssistVehicle DiagnosticsMy Car ZoneParking MindereServices Guidepart.4 UVO eServices
4-2 I UVO eServicesUVO eServicesThe 911 Connect feature may not operate in the following situations When the vehicle ignition is not turned on. When the phone Bluetooth® feature is set to off. When the phone Bluetooth® cannot be connected or becomes disconnected. When there are no phones paired with the vehicle. When cellular service is unavailable. When the power turns off due to phone power (battery) issues. When a Bluetooth® device without phone feature support has been connected, such as an MP3 device. When the system is booting. When the system power supply is unstable. When the attempted call is blocked due to user operations. When the 9-1-1 call is unstable due to phone or other commu-nication network issues. When the call feature is not operating due to phone settings set by the user. When the phone cannot be controlled via Bluetooth® due to phone specifications or characteristics.
Using UVO eServices and Precautions I 4-304 Using UVO eServices and Precautions Download the UVO eServices App and install it on your smartphone. The app can be downloaded from your smartphone’s app store. For using UVO eServices call features such as 911 Connect, Roadside Assist and eServices Guide, a smartphone must be connected with the vehicle via Bluetooth. Pair and connect your smartphone with the vehicle. For information on connecting your Bluetooth device, refer to the smartphone user’s manual and instructions on the Phone Help screen on your radio. Up to five Bluetooth devices can be paired to the vehicle and only one device can be connected at a time. For using data communication of Vehicle Diagnostics, Parking Minder, and My Car Zone, smartphone must be connected with the vehicle via USB cable. ※ The use of genuine cable is recommended. (The use of other products may result in abnormal or non-proper operation.) Login and activate the UVO eServices App on your smartphone. Some UVO eServices features will only be available when your smartphone is connected with the vehicle via USB and the UVO eServices App is running. UVO eServices may not operate properly with incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com Communication between the vehicle and smartphone app may temporarily disconnect depending on the phone state. If the feature is not operating properly, you may need to reset the UVO eServices App or the smartphone and try again according to the following steps.1. Try feature again in the Head Unit2. Restart smartphone app3. Re-connect Bluetooth and USB cable4. Reset smartphone5. Delete Device and pair again Some services use the customer’s mobile phone data plan for data communication. Therefore, the features will function in accordance with the cellular plan. Use of the most up-to-date app version is recommended. For smartphone related inquiries, please visit MyUVO.com.
4-4 I UVO eServicesAbout UVO eServicesUVO eServices provides the following features through Bluetooth and/or USB connection to your smartphone.Name Connection Description 911 Connect BTIf an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator. Roadside Assist BT & USB If a diagnostic issue exists, you can connect with a Roadside Assist. Vehicle Diagnostics USBInforms you if there is a diagnostic issue found in your vehicle. If an issue is found, you can contact a call center through Roadside Assist or reserve an appointment with your preferred Kia dealer through Schedule Service. My Car Zone USBKeeps track of predefined triggered alerts such as Speed Alert and Curfew Limit Alert from the My Car Zone feature. Parking Minder USBSaves the location of your parked vehicle on your UVO eServices smartphone app.You can check where your vehicle is parked through the UVO eServices App on your smartphone. eServices Guide BT Receive guidance on how to use UVO eServices.i Information• 24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a connected mobile phone via Bluetooth within the cellular service coverage area is required.To use UVO eServices, the following conditions must be met.1. The UVO eServices smartphone app must be installed and you must log in using your MyUVO account credentials.2. The smartphone must be connected via Bluetooth and USB cable to the vehicle.3. Once this is complete, eServices must be activated.
Pair a device from Bluetooth-enabled phone I 4-504Before using UVO eServicesInstalling the UVO eServices App on your smartphone1. Download and install the UVO eSer-vices App on your smartphone.The app can be downloaded from theApple App Store or Google Play.2. Register your vehicle and account atMyUVO.comNote: MyUVO.com is accessible fromyour phone’s browser.3. Start the UVO eServices App on yoursmartphone and log in.Connecting BluetoothPress the key on the steering wheel or press the PHONE key on the head unit. Press SETUP ▶ Bluetooth ▶ Bluetooth Connection.Pair a device from Bluetooth-enabled phone1. Turn on the Bluetooth feature on yoursmartphone’s Bluetooth settings screen.2. Search Bluetooth devices on yoursmartphone.3. Select the Vehicle Name on the phonethat matches the name shown on thescreen.4. Verify the passkey shown on the touch-screen.If the phone supports SSP, check the passkey on your Bluetooth® device and confirm the authentication.
4-6 I UVO eServicesConnecting to smartphone via USB1. Connect your smartphone with the vehi-cle via USB cable. NOTICE• For smartphone related inquiries, please visit MyUVO.com. Activating UVO eServicesPress the UVO key, then press the Vehicle Diagnostics or My Car Zone or Parking Minder button.Press the Yes button, then the UVO eServices activation process will begin. NOTICE• Before activating UVO eServices, ensure your phone is connected to the vehicle via USB cable.
911 Connect I 4-704911 Connect911 ConnectIf an airbag deploys, your vehicle automat-ically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.The 911 Connect feature is available only when the mobile phone is connected via Bluetooth.By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agreeing to the 911 Connect terms of use.A ( ) icon is displayed at the top of the touch screen as shown below when phone is connected to UVO eServices system via Bluetooth and the 911 connect feature is turned on.Initiating a 911 CallIf an airbag deploys, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds.Once a call is connected with a 9-1-1 operator, it is possible to request emer-gency services to be dispatched to your location.
4-8 I UVO eServicesThe 9-1-1 operator may request informa-tion on the current location of your vehicle.When the 9-1-1 operator requests your vehicle location, “Sending Location” is displayed on the screen and the vehicle location is automatically sent to the 9-1-1 operator.When the 9-1-1 operator attempts to talk to the driver again, the call time is dis-played and allows the driver to speak with the 9-1-1 operator.Roadside AssistRoadside AssistIf there is any issues in the vehicle, you can connect with a Roadside Assist agent. The Roadside Assist feature can be used only when your phone is connected via Bluetooth.Press the UVO key ▶ Roadside Assist.
Vehicle Diagnostics I 4-904Vehicle DiagnosticsConducting Vehicle DiagnosticsVehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked.It also requires that UVO eServices is activated, and the Phone is connected via USB cable before starting Vehicle Diagnostics.Press the UVO key ▶ Vehicle Diagnostics.The Vehicle Diagnostics process will begin.When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the Cancel button on the touch screen or any hardkey.If diagnostic issues are found, press the Send Report button to send to your MyUVO account or press the Schedule Service but-ton to schedule an appointment with your preferred or nearby Kia dealer.
4-10 I UVO eServicesSchedule ServiceWhen scheduling an appointment using the Schedule Service button, pressing the Preferred button will allow you to request an appointment with your preferred Kia dealer and send your vehicle’s diagnostics infor-mation.Pressing the Nearest button will allow you to request an appointment with the near-est Kia dealer and send your vehicle’s diagnostics information.Press the Preferred or Nearest button.Request an appointment with Preferred or Nearest Kia Dealer and send your vehi-cle’s diagnostics data.Send ReportPress the Send Report in the vehicle diag-nostics result screen. Vehicle Diagnostics Data is transmitted to your account and you can see the report on MyUVO.com
Vehicle Diagnostics I 4-1104Even if diagnostic issues are not found after Vehicle Diagnostics, it is recom-mended that you send the diagnostic results to your MyUVO account.Press the Send Report button to send the diagnostics results to your MyUVO account.Scheduled DiagnosticsIf you have set up Scheduled Diagnostics on your UVO eServices App, a vehicle diagnostics check will automatically start on the day you selected.On the date of the Scheduled Diagnostics, the following window will be displayed.Press the Yes button on the touch screen to proceed with diagnostics.Press the Send Report button to see the Vehicle Health Report on MyUVO.com.
4-12 I UVO eServicesAutomatic DiagnosticsIf a critical diagnostics issue with your vehicle’s powertrain is detected, Automatic Diagnostics will be notified. NOTICE• The screen messages differ based on the vehicle diagnostics severity. Ensure your phone is connected to the system via USB cable before using Schedule Service and Send Report.My Car ZoneMy Car Zone is a feature that provides alerts and driving history for Curfew Limit Alerts and Speed Alerts set by the user.Name DescriptionCurfew Limit AlertCurfew Limit Alerts are alerts that are triggered when a driver is driving within a predefined time range.Speed AlertSpeed Alerts are alerts that are triggered when a driver exceeds the predefined maximum speed.My Car Zone features are supported only when UVO eServices has been activated.Press the UVO key ▶ My Car ZoneCurfew Limit Alerts HistorySpeed Alerts History
My Car Zone I 4-1304Curfew Limit AlertSpeed AlertCurfew Limit AlertYou can check the Curfew Limit Alert his-tory for a list of past triggered curfew alerts.Name Description PhoneName of phone con-nected upon triggered curfew limit Alert Time Initial alert time DurationTotal duration of driving while curfew limit was triggered Driving TimeTotal driving time from turning ignition on until turning ignition offSpeed AlertYou can check the Speed Alert history for triggered speed limit alerts of the vehicle.Name Description PhoneName of phone con-nected upon triggered speed limit alert Max. SpeedMaximum vehicle speed upon triggered speed limit alert Alert TimeTime from first triggered alert until last triggered alert DurationTotal triggered alert time from turning ignition on to turning ignition off
4-14 I UVO eServicesTo check My Car Zone alert history from your smartphone, you must first send the alert history to your MyUVO account.Parking MinderSending Parking LocationThe location where your vehicle is currently parked can be sent to your smartphone.Ensure that your smartphone is connected via USB and the UVO eServices App is running before using this feature.After parking the vehicle, press the UVO key ▶ Parking Minder to send the vehicle’s location to your smartphone.Once the parking location has been sent, you can view your vehicle’s location from the UVO eServices App on your smart-phone. NOTICE• When the parking location is being sent, do not drive the vehicle. Ensure that you have logged into the UVO eServices App, and your phone is connected to the multimedia system via USB cable.• When ignition is turned off while the phone is connected via USB, Parking Minder can be transferred automatically if the option is set up in UVO eService Settings
eServices Guide I 4-1504eServices GuideeServices GuideeServices Guide provides guidance on how to use UVO eServices.This feature is only available when the mobile phone is connected via Bluetooth.Press the UVO key ▶ eServices Guide UVO eServices SettingsRefer to SETUP key ▶ UVO eServices.
MEMO
What is Voice Recognition?Precautions Required for Successful Voice RecognitionStarting/Ending and Setting Voice Recognition Voice Recognition Screen OverviewVoice CommandsSiri Eyes Free part.5 Voice Recognition
5-2 I Voice RecognitionWhat is Voice Recognition?The voice recognition feature operates the multimedia system by recognizing voice commands and enables hands-free oper-ation of the system while you are driving your car.Not all possible voice commands are rec-ognized by the system due to technological limitations. To make up for these limitations, the system displays the voice commands that are available for you to use.There are errors in communication between people. Likewise, voice recognition some-times misunderstands your voice command in some circumstances. If this happens, either check the screen for the available options and say the command again, or manually select and press the button for the corresponding command on the screen.Precautions Required for Successful Voice Recognition1. Voice recognition supports only the commands that are displayed on the screen and written in the User's Guide.2. To ensure the correct recognition and execution of your command, say your command when you hear the beep after a voice prompt.3. Voice recognition automatically ends if:1) A call is incoming or outgoing2) A media device (USB or iPod, etc.) is connected or disconnected3) The rear view camera is operated4) The car engine starts or stops5) A system key, such as RADIO key or MEDIA key is selected 4. The microphone used for the voice recognition system is located in the headliner directly above the driver's head. To make your commands better understood, keep your body straight in the driver's seat when speaking the command.5. Speaking naturally and clearly will ensure better recognition of your voice commands.6. In the following cases voice recognition will be affected by ambient noise.1) The sound of the wind if any window or the sun roof is open.2) High speed blower from the air vents. Set climate control to blow lower than level 3.3) Vibrations from passing through a tunnel.4) Vibrations from driving on an uneven road.5) Storms and heavy rain.Voice Recognition
Starting/Ending and Setting Voice Recognition I 5-305Starting/Ending and Setting Voice RecognitionStarting Voice RecognitionPress the key briefly (less than 0.8 seconds) on the steering wheel control to activate voice recognition.Ending Voice Recognition1. Select “Exit” to the left of the bottom to end voice recognition.2. Press and hold (more than 0.8 sec-onds) the key on the steering wheel control to end voice recognition.Combining Voice Recognition with On-Screen CommandsAfter pressing the key, say a com-mand after the beep. The voice recognition system will execute the desired operation after understanding the command.Alternatively, you may touch any of the corresponding Commands on the screen while the Voice Recognition system is in operation. Combining voice recognition with available on-screen commands is useful when the system is taking longer than expected or the voice command did not execute as desired.
5-4 I Voice RecognitionExtending the Listening TimeWhen the system is waiting for your com-mand, after the voice prompt and beep have been heard, if you press the key (less than 0.8 seconds), then the beep will sound again and standby mode will restart.When activated, voice recognition waits for your command for 5 seconds. If you say nothing for 5 seconds, a voice prompt will ask for your command again.
Starting/Ending and Setting Voice Recognition I 5-505Skipping Prompt Messages When you hear the prompt message, press the key on the steering wheel control to skip the message and go directly to listening mode to say your com-mand.This results in faster operation when you feel the message is too long or you already know the command to use.i Information• Refer to Part 8 for instructions on how to change the Voice Recognition Settings.Adjusting Voice Recognition VolumeDuring voice recognition, rotate the vol-ume knob to adjust the message volume.
5-6 I Voice RecognitionVoice Recognition Screen OverviewStart ScreenName Description Representative CommandsDisplays the represen-tative commands. Not available commandDisplays commands that are not available due to a failure in meeting the conditions for using them and thus need additional settings. The conditions required for using them will be described briefly under each command.Name Description Voice recognition status icons Standby Voice guidance Voice command process Recognized resultsDisplays the voice rec-ognition result. User's speaking volume being recognizedDisplays the voice command volume in real time. HelpDisplays all available help commands in a tree format. Exit Ends the voice recog-nition.Help DisplayName Description Command list• Shows the available commands. • Select or say a command to display additional com-mands in detail. How to use for selected itemThis section shows how to use voice recognition for the selected item. How to use in generalThis section displays how to use voice recognition in general.
Voice Recognition Screen Overview I 5-705Instructions for Using Voice RecognitionName Description Detail instructionThis section describes how to use voice recog-nition in detail. Close buttonCloses the screen and restarts voice recognition.i Information• In the instructions screen, no voice is recognized, so you must manually issue commands. Because the instructions screen displays a lot of content, you cannot view it while driving for safety precautions.
5-8 I Voice RecognitionVoice CommandsTypes of CommandsVoice recognition commands are classified as “Global Commands” and “Local Commands”.1. Global Commands (●): Commands that can be used immedi-ately after activating voice recognition.2. Local Commands (○): Commands that can be used when a multimedia or Bluetooth function is running, or displayed on the screen, after activating voice recognition.Call Commands* Check the following before using call commands:1. Voice commands related to phone calls can be used after con-necting a Bluetooth device. 2. To call a person, for example “Call <John Smith>” whose name is listed in Contacts, you must first download the Contacts list. For details on downloading contacts, see “Part 3. Bluetooth > Chapter 3. Bluetooth Phone > 3.10 Contacts”.3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by name yet. The time it takes to convert voice data may vary depending on the number of Contacts downloaded on the phone.Command Operation●Call Displays downloaded Contacts, after this you can make a call by saying the name.●Call <Name> You can directly call a person by <Name> in the downloaded Contacts.●Call <Name> on MobileYou can call a person <name> directly to the number that is saved as “Mobile” in the downloaded Contacts.e.g.) Call “John Smith” on Mobile●Call <Name> at WorkYou can call a person <name> directly to the number that is saved as “Work” in the down-loaded Contacts.e.g.) Call “John Smith” at Work●Call <Name> at HomeYou can call a person <name> directly to the number that is saved as “Home” in the downloaded Contacts.e.g.) Call “John Smith” at Home●Call <Name> on OtherYou can call a person <name> directly to the number that is saved as “Other” than “Mobile, Home, or Work” in the downloaded Contacts.e.g.) Call “John Smith” on Other●Dial Number Displays a screen where you can say a phone number to dial.●Dial <Phone #> You can directly say the number to call.e.g.) Dial 111 555 1234●Redial Directly calls at the number that you last dialed.●Call History Displays your Call History, where you can say the list number to make a call.
Voice Commands I 5-905Radio CommandsCommand Operation●Radio Plays the most recent radio channels from FM, AM, and SiriusXM™.●FM Plays FM radio.●FM <87.5~107.9>Tunes to FM <Frequency> according to what you say.e.g.) FM 87.5: FM eighty seven point five●SiriusXM Plays SiriusXM™ radio.●SiriusXM <0~999>Tunes to SiriusXM™ Channel <Channel Number> according to what you say.e.g.) SiriusXM 23: SiriusXM Twenty three●AM Plays AM radio.●AM <530~1710>Tunes to AM <Frequency> according to what you say.e.g.) AM 530: AM Five thirty○Preset <1~40> Tunes to your preset stations (1 to 40).○Channel <0~999>In SiriusXM™ Radio mode, turns on the <Channel Number> that you say.
5-10 I Voice RecognitionMedia Commands* Check the following before you use media commands.1. If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you that this is not available.2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.Command Operation●Music Continues the last media you played.●iPodPlays the iPod currently connected. This will work the same when an iPhone is con-nected. If a USB is connected, then it will be played instead of the iPod.●USBPlays the music on the USB currently con-nected.If an iPod is connected, then the iPod will be played instead of the USB.●Bluetooth AudioPlays the music on the Bluetooth phone currently connected.This may not be supported depending on the Bluetooth connection status.●AUX Plays external devices that are currently connected.●My Music Plays My Music files stored in the system.
Voice Commands I 5-11051. USB Music/iPod/My Music CommandCommand Operation○Play Plays a selected file.Maintains the current settings during playback.○PausePauses a file that is playing.Maintains current settings while paused during playback.○ShufflePlays tracks or files randomly.Maintains current settings during shuffled playback.○Shuffle OffCancels Shuffle and plays tracks sequentially.Maintains current settings during sequential playback.○RepeatPlays the current track or file repeatedly.Maintains the current settings during repeat play-back.○Repeat OffCancels Repeat and plays multiple tracks or files.Maintains current settings during multiple track playback. 2. Bluetooth audio/AUX CommandFor Bluetooth audio and external devices (AUX), local commands are unavailable, including Play, Pause, Repeat and Shuffle.
5-12 I Voice RecognitionUVO eServices Commands ListCommand Operation●Roadside Assist Connect with a Roadside Assist agent.●VehicleDiagnosticsInforms you if diagnostic issues are found in your vehicle●eService Guide Provides guidance on how to use UVO eServicesOther Commands List(Commands used in List/Help)Command Operation●HelpMoves to the voice recognition help screen.All available commands can then be identi-fied and used.○Line 1~4 (One~Four)When you cannot select a certain name, such as in Call History, you can select it using numbers.Simple numbers can be recognized, such as “One” or “Two”.○Yes/NoWhen voice recognition is activated, this command is used when an answer is requested for a confirmation question.○Previous/Next When four or more searched items are listed, you can move to the previous or next page using a voice command.○Manual InputWhen Dial entry results are displayed, this command is used to search manually, rather than to search with a voice com-mand.Voice recognition stops after this command is used. ○Go Back Moves to the previous screen.●Exit Ends the voice recognition.
Siri Eyes Free I 5-1305Siri Eyes FreeHow to start SiriIf you want to use Siri, you have to con-nect your iOS device to the Multimedia system through Bluetooth. (Please check whether your iOS device supports Siri and turning Siri On)Then you can use Siri while pressing and holding key on the steering wheel. How to use SiriWhen you access the Siri screen while pressing and holding key on the steering wheel, you select the Speak but-ton and then you can speak what you want. Note that the Multimedia system only supports “Phone” related functions. Other functions will be performed in your iOS device. If you press voice key quickly, Siri would re-start. If you hold down voice key, Siri would be terminated and the screen would go back to the previous screen. Eyes-Free mode would be acti-vated automatically while you are driving. When shifting gears into P or putting the Parking brake on, Eyes-Free mode would be deactivated automatically. i Information• Functions and feedbacks from voice commands via Siri are executed in the iOS device. If the iOS version is changed, the functions and response may be different according to the iOS device and the latest version.
MEMO
SiriusXM™ Datapart.6 Apps/Info
6-2 I Apps/InfoSiriusXM™ DataAbout SiriusXM™ Data ServiceThe SiriusXM™ Data Service is a paid membership satellite radio service that provides users with information such as Weather, Sports, Stocks, Fuel Prices and Movies.However, weather information is not supported for vehicles pur-chased in Canada.Accessing SiriusXM™ DataSelect the SiriusXM Data icon after selecting All Menus or the APPS/ key to enter the SiriusXM™ Data mode.Apps/Info
SiriusXM™ Data I 6-306SiriusXM™ Weather AnnouncementAt the “SiriusXM Data” screen, select the Weather icon to enter the Weather Announcement mode.Weather ForecastThis service provides current weather information and weather forecasts for the next five days in your region. To change the region, select the Other City button and select the desired region.Warnings and Advisories This service provides weather warnings and advisories, such as tornado, storm,flood, etc.
6-4 I Apps/InfoSiriusXM™ Sports InformationSelect the Sports icon to enter the Sports mode.This service provides real-time updated information on scores and schedules for major sports, such as NFL, NBA, NCAA football, NCAA basketball, NHL, MLB, NASCAR and more.My TeamsYou can save teams which you are inter-ested in as part of My teams to easily view related scores and schedules.Select the My Teams menu and then select the Add button to search for and register your favorite teams.Search for your favorite teams and select the button on the right to add it to the “My Teams” list.You can always check the list of teams that you added in the “My Teams” menu. Select the button on the right side of the team name to delete the team from “My Teams” or select the Add button to add other teams.
SiriusXM™ Data I 6-506Select the team name to check daily results and recent schedules for that team.SiriusXM™ Stock InformationIn the “SiriusXM Data” screen, select the Stocks icon to enter the Stocks mode. Stocks is a feature that shows the current value and change of stocks.For symbols which you are interested in, select the icon to save the symbol as a part of the “Saved” symbols which can be viewed from the “My Favorites” button on the Stocks Main screen.
6-6 I Apps/InfoMy FavoritesMy Favorites shows a list of stocks added by the user. When entering the Stocks menu for the first time, a screen is dis-played for you to add your favorite stock information. Select the Add button to move to the stock search screen.Stock SearchUse the Stock Search menu to search for specific stocks.Select the button after searching for your favorite stocks to save them in “My Favorites”.In the My Favorites screen, you can find the selected stock information that you registered.
SiriusXM™ Data I 6-706SiriusXM™ Fuel Price InformationAt the “SiriusXM Data” screen, select the Fuel Prices icon to enter the Fuel Prices Information mode.Search for Nearby Stations, and Register Key Locations as Favorite Stations.Search for nearby stations with the “Nearby Stations” menu.It shows station locations, starting from the nearest one, and select “Nearest” menu on the top right side to further sort them by price or brand name. Select the button to the right of the list to register key locations as a Favorite Station so that you can go there again with the “Favorite Stations” menu.
6-8 I Apps/InfoMy Fuel Type SettingsWith the “Filters” menu, you can select fuel types and favorite brands.When searching for Nearby Stations, the results will reflect selected fuel types and brand information.SiriusXM™ Movie InformationSelect the Movies icon to enter the Movie mode.You can check recent movies and nearby theaters, and also register your favorite theater locations.Search for Nearby Theaters, and Register Any Key Locations as Favorite Theaters.In the “Nearby Theaters” menu, you can search for any nearby theaters.It shows theaters, starting from the nearest one, and selecting the “Nearest” menu at the top right side will sort them by name.
SiriusXM™ Data I 6-906Select the button to the right of the list to register your favorite theater so that you can always check it again using the “Favorite Theaters” menu and selecting the button to view the current movie information for that theater.In the “Top Movies” menu, you can check for any movies that are currently popular. Select the button to the right of a movie title to view the plot summary and any other detailed information.
MEMO
Climate ModeCamerapart.7 Other Features
7-2 I Other FeaturesOther FeaturesClimate ModeOperating Climate ModePress the CLIMATE key for the climate system to see status infor-mation in the full screen display.While multimedia or navigation is in use, the climate system infor-mation will be displayed over top when you control the tempera-ture (TEMP) or turn on the air conditioner (A/C).Basic Mode ScreenName Description Set the temperature of the driver's seat and passenger seatsDisplays the configured temperature set-tings for the driver's seat and the passenger seats. Cooling or heating will continue until the temperature matches the configured temperature settings. The internal temperaure can be con-trolled in incrments of 1°F within a range of 63°F to 89°F. LOW is displayed when the temperature is set to anything below 63°F, and HIGH is displayed when it is set to anything above 89°F. Air direction Displays the configured air direction settings. Air volume Displays the configured air volume settings Cooling/heating control status (AUTO)Displayed when the AUTO key is pressed and cooling/heating operates automatically according to the configured temperature settings. AUTO will be turned off when you try to do the following with AUTO on:- Control the air volume- Control the air direction- Turn the air conditioning (A/C) on/off - Turn on the moisture removal function for the windshield Air conditioning control statusDisplayed when the A/C key is pressed and the air conditioning starts cooling/heating.
Climate Mode I 7-307Name Description Simultaneous tem-perature settings for the driver's seat and the passenger seats (SYNC)Displayed when the SYNC key is pressedand the temperatures of the driver's seat and the passenger seats can be config-ured at the same time.
7-4 I Other FeaturesCamera WARNING- Backing Up & Using Camera• Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view camera by looking over your shoulders and checking your rear view mir-rors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you.i Information• A separate chipset is used for the camera screen while booting up, so it may be different after booting up.Steering-linked camera• This device is connected to a rear detection camera to see behind the car for safe reversing.• The Rear View Camera turns on auto-matically if you shift the gear to R when the power is on or the engine has started.• While the device boots up, shift the gear to "R" to activate the rear detection cameras.Shift the gear to another position to deac-tivate the rear detection camera. NOTICE• A wide-angle lens is installed as the rear detection camera to get a wider view, so there may be some difference between the actual distance and the distance that appears. on-screen. For safety, make sure to view the back, right, and left sides of the car for yourself.• The color of the parking guidelines displayed in the picture may differ from the actual screen.• When booted up, blinking may occur when you switch to a UI screen.Name Description Red Line About 0.5 m from the rear bumper Yellow Line 1 About 1 m from the rear bumper Yellow Line 2 About 3 m from the rear bumper Yellow Line 3 Trajectory of the wheel on the driver’s side Yellow Line 4 Trajectory of the wheel on the passenger side Blue Line Neutral steering trajec-toryAs you reverse your car and monitor the area behind your car, the steering-linked driving trajectory and the neutral driving trajectory are both displayed.
SetupSound SettingsDisplay SettingsBluetooth SettingsUVO eServices SettingsHome Screen SettingsWi-Fi SettingsClock SettingsVoice Recognition SettingsLanguage SettingsKeyboard SettingsScreen Saver SettingsSystem Infopart.8 Setup
8-2 I SetupSetupSetupSetup is the screen to control Audio sys-tem settings. To enter the screen, press the SETUP key or the Setup icon in All Menus.Features Description SoundProvides the sound con-trol options for Position, Bass, Mid, Treble, Volume and Advanced settings. Display Provides the Mode/Illumination settings. BluetoothProvides the Bluetooth Connection/Auto Connection Priority/Bluetooth System Information settings. UVOeServicesProvides the 911 Connect/Parking Minder/My Car Zone/Scheduled Diagnostics/Trip Info Sync Reminder Settings. Phone projectionFor more details, refer to Phone projection guide. Home ScreenProvides the function to customize the three menu items at the bottom of the Home Screen.Features Description Wi-FiProvides the Wi-Fi On and Network Connection settings. Clock Provides the Time and View settings. Voice RecognitionProvides the Guidance and Priority settings. Language Provides the Change Language settings. Keyboard Provides settings to switch keyboard layouts. Screen SaverProvides the Clock/None settings. System InfoProvides software and storage space informa-tion. Display OffProvides the Display Off (touch activation) func-tion.
Setup I 8-308Sound SettingsAdjusts the sound effects for the whole system.Features Description PositionSelect the Up/Down/Left/Right button to controlsound positioning.Select Center to concen-trate the sound on the center of vehicle. ToneDrag the slide bar to control bass/mid/treble settings.Select Center to initialize the settings.Features Description AdvancedSelect additional audio options such as “Speed Dependent Volume Control” that automatically controls Audio volume according to vehicle speed as well as “Variable EQ”. Default Resets the sound to fac-tory default settings. Beep Select to activate a beep when pressing buttons.i Information• Advanced sound settings may differ according to selected AMP option. • The seat shape may differ according to vehicle model.Display SettingsAdjusts the level of illumination for theentire system.Features Description ModeSelect any of LCD illumi-nation change modes:Automatic (changesthe level automatically),Daylight, and Night. IlluminationSet the levels of illumina-tion for day and night.Select Default to initializethe settings. Default Resets the display to fac-tory default settings Display Off Provides the Display Off (touch activation) function.
8-4 I SetupBluetooth SettingsChanges Bluetooth phone settings.Bluetooth SettingsPress the SETUP key ▶ Select Bluetooth icon. Bluetooth Connection SettingsPress the SETUP key ▶ Select Bluetooth ▶ Select Bluetooth Connection.Features Description Paired Device ListDisplays the paired Bluetooth device list. When selecting from the list, the device is connected or discon-nected. Bluetooth Audio Connection StatusAn icon appears when you make a Bluetooth Audio connection. Bluetooth Hands-Free Connection StatusAn icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device. Delete Devices Select and delete a paired device. HelpSwitches to the Bluetooth Connection Help screen.
Setup I 8-508i Information • Up to 5 Bluetooth devices can be paired. • Only one Bluetooth device can be connected at a time. • During a Bluetooth device connection, another device cannot be paired. • When you delete a paired device, the Call History and Contacts stored in the head unit are also deleted. • Bluetooth Hands-free and Bluetooth Audio functions are supported. • Hands-free and audio-supported devices, such as a Bluetooth smartphone or audio, will function normally. • When a Bluetooth device is connected, if the Bluetooth connection is unexpectedly disconnected, due to being out of communication range, the device powering off, or a Bluetooth communication error, the Bluetooth device automatically searches for and connects to nearby Bluetooth devices. • If the system is not stable, due to a vehicle-Bluetooth device communication error, restore the Default Factory Settings. • For Default Factory Settings, the bluetooth settings are reset to factory settings. • Press the SETUP key ▶ Select Bluetooth ▶ Select Default Factory Settings.Auto Connection PriorityPress the SETUP key ▶ Select Bluetooth ▶ Select Auto Connection Priority.When the engine is running, the selected Bluetooth device is automatically con-nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially.Depending on auto connection priority, connection to a device may take time.Bluetooth System InformationPress the SETUP key ▶ Select Bluetooth ▶ Select Bluetooth System Info.Features Description Vehicle NameYou can change the Bluetooth device name of the vehicle. PasskeyYou can change the pass-key used for Bluetooth device authentication. the initial passkey is 0000.i Information • The vehicle name above is an example. Check the actual information on the product.
8-6 I SetupDefault Factory SettingsYou can delete all paired devices and restore the Default Bluetooth Settings. For Default Factory Settings, all paired devices are deleted, and the system is reset to factory settings.UVO eServices SettingsWithin the eServices Settings screen, UVO eServices related features can be set, such as activating 911 Connect, Parking Minder and setting the My Car Zone.For safety reasons, My Car Zone Settings cannot be adjusted while driving. Park the vehicle before making any changes to your settings.Press the SETUP key ▶ UVO eServices 911 ConnectThis feature is used to turn on or off the 911 Connect feature.
Setup I 8-708When enabing this feature, you must first agree to the 911 Connect tems of use.After reading the tems of use, press the Agree button on the touch screen to accept.Parking MinderIf you want to send vehicle location to your smartphone automatically when you turn the ignition off, turn the Parking Minder feature On.My Car ZoneThis feature is used to set My Car Zone (Curfew Limit, Speed) alert conditions.My Car Zone Settings is unavailable when UVO eServices has not been activated.Press the SETUP key ▶ UVO eServices ▶ My Car Zone.The PIN must be entered to use My Car Zone Settings.
8-8 I SetupThis screen is used to set Curfew Limit and Speed Alert features.Set the alert conditions On ▶ Settings.Curfew Limit Alert SettingsWithin Curfew Limit Alert Settings, you can set the Curfew Limit Alert Start and End Time. You can also set the Alert Interval of alerts upon Curfew Limit.Speed Alert SettingsWithin Speed Alert Settings, you can set the vehicle speed limit and Alert Interval of alerts upon overspeeding. PINThis feature is used to change the PIN to enter My Car Zone Settings. NOTICE• Before pressing Done, ensure your smartphone is connected to UVO eServices system via USB cable.
Setup I 8-908Press the Done button to transmit the new PIN to your My UVO com account.Restore Factory SettingsThis feature is used to restore all My Car Zone alert history and settings back to default state.Scheduled DiagnosticsThis feature is for setting when scheduled diagnostics alerts display.Press SETUP key ▶ UVO eServices ▶ Set the Scheduled Diagnostics On ▶ Settings NOTICE• For months without the corresponding day, the last day of the month will automatically be set as the scheduled diagnostics date.
8-10 I SetupTrip Info Sync ReminderTrip Info is a feature used to set whether system displays alert when trip info(Driv-ing Distance, Driving Speed, Driving Time, etc). reaches 90% of memory.UVO eServices must be activated to use this feature.Press SETUP key ▶ UVO eServices ▶ Set Trip Info Sync Reminder OnHome Screen SettingsYou can customize the three menu items at the bottom right of the Home Screen into the ones you want.On the Home Screen Settings screen, drag the menu items on the right to the area marked in red in the screen below.i Information • You can select the Default button to reset to the factory default settings.Wi-Fi SettingsYou can share a digital-device network with the vehicle device through Wi-Fi.Features Description Wi-Fi Turn on/off Wi-Fi. MAC Address Displays the MAC address. Refresh Searches available net-works near the vehicle. Network NameDisplays available network AP (Access Point) names. Add Wi-Fi NetworkEnter the network ID/password to connect to a hidden network AP (Access Point). Help Shows the Wi-Fi setupguide.
Setup I 8-1108How to Connect to a Network1. In the Wi-Fi settings of a digital device, activate Internet sharing (Hotspot).2. In the vehicle network list, select the desired device to connect to. Enter the password to connect, if any.Clock SettingsConfigure the settings for time and date.Using the arrow buttons, you can change the values. Clock settings do not automat-ically change when crossing into different time zones. The time must be changed manually on this screen.Features Description Daylight Saving TimeThe daylight saving time (DST) is applied. 24 Hours The time display is set in 24-hour format. Direct entryIf you tap any value, you can directly enter the number in the fol-lowing screen.Voice Recognition SettingsConfigure how to make a call with Voice Recognition Guidance and Voice Recognition.Features Description BeginnerFor beginners, the voicerecognition system pro-vides voice prompts. NormalFor normal users, the voice recognition system provides simple and short voice guidances.
8-12 I SetupLanguage SettingsYou can configure the displayed system language.When the language is changed, the sys-tem language is automatically changed.Unique data including MP3 file name is not changed and voice recognition does not support some languages.Keyboard SettingsYou can configure the keyboard layout for each language.You can configure ABCD or QWERTY keyboards for the system.i Information • Configured keyboard layouts are applied to all input modes.Screen Saver SettingsYou can select any of the following screen formats to be displayed when the screen or power is turned off (Press and hold the Power button).• Digital clock and date• Analog clock and date• None
Setup I 8-1308System InfoAt the System Info screen, software ver-sion information, updates, and storage status details are available.Features Description SW InfoSystem version informa-tion and update details are available.Select the Update button to update the system. After update is complete, the system will reboot automatically. Storage Displays the memory space available for media storage.System UpdateAt the System Info screen, insert the USBmemory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically.i Information • This product needs supplemented software updates and additional functions, which collectively may take some time to complete, depending on the amount of data. CAUTION• If the power is disconnected or the USB is removed during an update, the data might be damaged. Please do not turn off the vehicle while an update is in progress.
MEMO
Product Specification TroubleshootingFAQpart.9 Appendix
9-2 I AppendixProduct SpecificationTFT-LCD Screen Size 7 inch(152.4 X 91.44 mm)Resolution 384000 pixels (Resolution: 800 x 480)Operating Method TFT(Thin Film Transistor) Active MatrixViewing Angle Left/Right, Top/Bottom: ALL 89° Internal Lighting LED RadioChannels FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz) AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)Sensitivity FM: Under 10 dBu/AM: Under 35 dBuDistortion Factor Within 2 %CommonName Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Operating Power DC 9 V ~ DC 16 VCurrent Consumption 2.5 A Sleep Current1 mA (Head Unit Only)Operating Temperature-20 ~ +70 °C(-4 ~ +158 °F)Storage Temperature-30 ~ +80 °C(-22 ~ +176 °F)Dimensions 178 X 140.2 X 60 mm (Main BOX)Weight 1.940 kgAppendix
Appendix I 9-309Wi-Fi DetailsFrequency 2412 ~ 2462 MHz,5180 ~ 5825 MHzSpecification IEEE802.11 a/b/g/n/acOperatingTemperature-20 ~ +70 °C (-4 ~ +158 °F)SupportedBandwidth 20/40/80 MHzBluetooth® Wireless TechnologyFrequency Range 2402 ~ 2480 MHzSupported Bluetooth® Specification3.0Supported Profile Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)Output -6~4 dBm (Power Class2, Conducted)Number of Channels 79 channels CAUTION• The producer and installer cannot provide services related to life safety as the concerned radio equipment is liable to radio interference.
9-4 I AppendixTroubleshooting1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.2. If you are having problems with the device, try the suggestions listed below.3. If the problems persist, contact your Kia dealer.Problem Possible CauseThere are small red, blue, or green dots on the screen• Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixelsThe sound or image is not working• Has the Switch for the vehicle been turned to [ACC] or [ON]?• Has the SYSTEM been turned OFF?The screen is being displayed but sound is not working• Has the volume been set to a low level?• Has the volume been muted?When the power is turned on, the corners of the screen are dark• The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction• If the screen is very dark, contact your nearest Kia dealer for assistanceSound is working from only one speaker• Are the positions of Fader or Balance sound controls adjusted to only one side?Problem Possible CauseSound does not work in AUX mode• Are the audio connector jacks fully inserted into the AUX terminal?The external device is not working• Is the external device connected with a standard connector cable?Upon turning power on, the most recent mode screen is not displayedWithin modes that play files by reading external sources, such as USB, iPod, or Bluetooth® streaming mode, the most recently played mode screen prior to turn-ing off power may not properly load• If the corresponding device is not con-nected, the mode operated prior to the most recent mode will operate• If the previous mode still cannot be properly played, the mode operated prior to that will operate
Appendix I 9-509Problem Possible Cause Countermeasure The power does not turn onThe fuse is discon-nected• Replace with a suitable fuse• If the fuse is disconnected again, please contact your point of purchase or Kia dealerDevice is not properly connected• Check to see that the device has been properly connectedThe system does not playThe vehicle battery is low• Charge the battery If the problem persists, contact your point of purchase or Kia dealerProblem Possible Cause Countermeasure The image color/tone quality is low• The brightness, saturation, hue, and contrast levels are not set properly• Properly adjust the bright-ness, saturation, hue, and contrast levels through Display SetupSound does not work• The volume level is set to the lowest level• The connection is not proper• The device is currently fast-for-warding, rewinding, scanning, or play-ing in slow mode• Adjust the volume level• Check to see that the device has been properly connected• The sound will not work when the device is fast-for-warding, rewinding, scan-ning, or playing in slow modeThe sound or image quality is low• Vibration is occur-ring from where the conversion switch has been installed• Image color/tone quality is low• The sound may be short-circuited and the image distorted if the device vibrates• The device will return to normal once vibrations stop
9-6 I AppendixProblem Possible Cause Countermeasure The USB does notwork• USB memory is damaged• Please use the USB after formatting it.• USB memory has been contaminated• Remove any foreign sub-stances on the contact surface of the USB memory and multimedia terminal• A separately pur-chased USB HUB is being used• Directly connect the USB memory with the multime-dia terminal on the vehicle• A USB extension cable is being used• Directly connect the USB memory with the multime-dia terminal on the vehicle• A USB which is not a Metal Cover Type USB Memory is being used• Use standard USB Memory• An HDD type, CF, SD Memory is being used• Use standard USB Memory• There are no music files which can be played• Only MP3, WMA file formats are supported. Please use only the sup-ported music file formatsProblem Possible Cause Countermeasure The iPod is not recog-nized even though it has been connected• There are no titles which can be played• Use iTunes to download and save MP3 files into the iPod• The iPod firmware version has not been properly updated• Use iTunes to update the firmware version and reconnect the iPod with the device• The iPod device does not recog-nize downloads• Reset the iPod and recon-nect with the deviceBluetooth does not work or its limited functions are available• Bluetooth on your mobile phone is set to OFF• Set it to ON• The Bluetooth connection is not made• Make the connection activei Information • While operating the device, if an abnormality occurs that cannot be corrected with the above described measures, press the RESET key to reset the system. • Press and hold the RESET key (more than 1 second). The device power will turn off and the system will reset.
Appendix I 9-709FAQAbout Pairing Mobile PhonesQ I cannot pair my mobile phone. What is the cause? A Check to see that the mobile phone supports Bluetooth® func-tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still can’t be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again.Q What is the difference between pairing a mobile phone and con-necting a mobile phone? A Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth® Handsfree features, such as making/answering calls or managing contacts, are supported only in mobile phones connected with the head unit. Q What is a Passkey? A A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time. The initial passkey is 0000. You can change it with SETUP ▶ Bluetooth ▶ Bluetooth System Info ▶ Passkey menu options.
9-8 I AppendixAbout Making/Answering Phone CallsQ How can I answer a call?A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, select the Accept button on the screen or the key on the steer-ing wheel control. To reject the call, select the Reject button on the screen or press the key on the steering wheel control. Q What should I do if I am talking on the Handsfree but want to switch the call to the mobile phone?A While on a call, press and hold (more than 0.8 seconds) the key on the steering wheel control or select the Use Private button at the bottom of the Phone screen to switch the call to your mobile phone.About Bluetooth® Wireless Technology/Head Unit Use EnvironmentQ What is the range of my wireless connection?A The wireless connection can be used within 15 yards.Q How many mobile phones can be paired?A It is possible to pair up to five mobile phones.Q Why is call quality sometimes poor?A Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depend-ing on the type of mobile phone.
09Important InformationBefore using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.Keep User's Guide in VehicleWhen kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully.WarningOperating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel.
General OperationVoice Command ControlFunctions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel.Prolonged Views of ScreenDo not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.Volume SettingDo not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.Use of Speech Recognition FunctionsSpeech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors.
FCC WarningFCC Part 15.19 Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Part 15.21 statementAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.RF Exposure Statement (MPE) The antenna (s) must be installed such that a minimum separation distance of at least 20 cm ismaintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter.06

Navigation menu