HYUNDAI MOBIS ADC31A9AN-1 Car Audio System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3603424
Application ID	PclErsj9tSjfPjO/Drb5yg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	256.89kB (3211153 bits)
Date Submitted	2017-10-12 00:00:00
Date Available	2018-04-05 00:00:00
Creation Date	2016-11-16 21:33:51
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2017-06-05 17:46:30
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	FEEL-6

CAR MULTIMEDIA SYSTEM
USER'S MANUAL
Read the following safety precautions
for your safety
Before using the product, read the contents of this user's manual
carefully and use this product safely.
Notations used within this User's Manual
WARNING
• Failure to observe the instructions within this category could result in death
or serious injury or damage to the vehicle.
CAUTION
※ The design and specifications of this product may change without prior
• Information on matters that could potentially lead to injury or vehicle
damage/malfunction Information that could lead to higher user safety
notification for product and service improvement.
The actual features in the vehicle may differ from the illustrations.
For more accurate information about the vehicle, please refer to the
catalogue.
i Information
• Information and tips that provide additional user convenience in using the
product
※ This Audio system contains open source software, including without
limitation, software distributed and/or modified under the GNU General
Public license, Version 2, June 1991, and the GNU lesser General Public
License, Version 2.1, February 1999.
For additional information and to obtain related materials including
without limitation, the previous referred to licenses and software, please
contact us at MOBIS_OSSrequest@mobis.co.kr
NOTICE
• Information on specific features that facilitate proper product use and
functional understanding
• Information on terminology used within this manual
iPod
®
Wi-Fi®
iPod® is a registered trademark of Apple Inc.
®
Bluetooth Wireless Technology
A compatible Bluetooth ® Wireless Technology-enabled cell phone is
required to use Bluetooth ® Wireless Technology.
The Bluetooth ® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Kia is under license.
Other trademarks and trade names are those of their respective owners.
A Bluetooth® enabled cell phone is required to use Bluetooth ® Wireless
Technology.
Bluetooth ® Wireless Technology phone compatibility can be checked by
visiting http://www.kia.com.
The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance.
part.1
Basic
Warnings and Cautions
Key Product Features
Component Names and Functions
Starting the System for the First Time
Basic
Safety Warnings
• Please refrain from use if the screen
• Some functions other than the one
is blank or no sound can be heard as
mentioned above cannot be used while
• Do not stare at the screen while driving.
these signs may indicate product mal-
driving. These functions operate only
Staring at the screen for prolonged peri-
function. Continued use in such con-
when the vehicle is parked.
ods of time could lead to traffic accidents.
ditions could lead to accidents (fires,
• Do not disassemble, assemble, or modify
the Multimedia system. Such acts could
result in accidents, fire, or electric shock.
• Heed caution not to spill water or intro-
electric shock) or product malfunctions.
• Do not touch the antenna during thunder or lightening as such acts may lead
to lightning induced electric shock.
duce foreign objects into the device.
• Do not stop or park in parking-restricted
Such acts could lead to smoke, fire, or
areas to operate the product. Such acts
product malfunction.
could lead to traffic accidents.
• If you use phone related functions while
• For most Audio and multimedia modes,
driving, you will find it difficult to concen-
the display will not operate when the
trate on operating the vehicle and the
vehicle is in motion. For your safety, first
current traffic conditions, so the possibility
park the vehicle to watch or view the
of an accident may increase. Please
screen.(The screen will only operate
use phone related functions only when
when the parking brake is ON for man-
parked.
ual transmission vehicles and when the
parking brake is ON or the gearshift is in
the P (PARK) position for automatic.)
1-2 I Basic
Safety Cautions
• Pay attention to the volume setting when
• Do not subject the device to severe
turning the device on. A sudden output
shock or impact. Direct pressure onto
Pay attention to traffic conditions while
of extreme volume upon turning the
the front side of the monitor may cause
driving.
device on could lead to hearing impair-
damage to the LCD or touch screen.
• Operating the device while driving could
ment. (Adjust the volume to a suitable
lead to accidents due to a lack of atten-
levels before turning off the device.)
• When cleaning the device, make sure
to turn off the device and use a dry and
tion to external surroundings. First park
• If you want to change the position of
smooth cloth. Never use tough materi-
the vehicle before operating the device.
device installation, please inquire with
als, chemical cloths, or solvents(alcohol,
In addition, the touch screen may not
your place of purchase or service main-
benzene, thinners, etc.) as such mate-
work for some functions when the vehi-
tenance center. Technical expertise is
rials may damage the device panel or
cle is in motion. The touch screen fea-
required to install or disassemble the
cause color/quality deterioration. When
ture will be supported once the vehicle
device.
experiencing product concerns, inquire
has stopped.
• Turn on the car ignition before using this
with your place of purchase or service
maintenance center.
• Adjust the volume to levels that allow
device. Do not operate the Multimedia
the driver to hear sounds from outside
system for long periods of time with the
• Prevent caustic solutions such as per-
of the vehicle. Driving in a state where
ignition turned off as such operations
fume and cosmetic oil from contacting
may lead to battery discharge.
the dashboard because they may cause
lead to accidents.
• Upon using the Multimedia system
damage or discoloration.
for more than 10 minutes with the car
engine turned off, the following warning
will be displayed. After 10 minutes, the
01
external sounds cannot be heard may
warning will be displayed for 5 seconds
every 1 minute.
Warnings and Cautions I 1-3
Key Product Features
This device is a Multimedia system equipped with a multifunctional player that supports Radio (FM, AM), SiriusXM™, USB,
iPod, AUX, Bluetooth Audio and My Music features. The WIDE
VGA LCD provides a high quality resolution while the powerful
and rich sound system adds to the driving enjoyment.
Display
Wide TFT-LCD Display
• Provides high quality video through a Wide
TFT-LCD Display using an LED Back Light.
• Touch screen for maximum user convenience.
Radio
Digital Tuner Feature
• Digital Tuner using PLL method that supports
memory of 40 broadcast stations.
Radio broadcast station name
• Displays broadcast station names.
Multimedia
Player
Support for various Media Formats
• Support for various media formats, including
®
Radio, USB, iPod, AUX and Bluetooth Audio
Streaming modes
My Music
• Supports copying of music stored within USB
devices into My Music (internal memory) mode
1-4 I Basic
Miscellaneous
Bluetooth® Wireless Technology
®
• Convenient use of Bluetooth Handsfree by
using buttons within the steering wheel control
Digital Screen Control Features
• Easy control of features through touch screen
options
Steering Wheel Control
• Control over audio features, voice recognition
®
and Bluetooth through the steering wheel
control for maximum convenience
Component Names and Functions
Name
PHONE
APPS/
Name
RADIO
Description
Selects FM/AM/SiriusXM™ mode
• Each time this is pressed, the mode is changed
in the following order: FM → AM → SiriusXM™
→ FM.
MEDIA
Selects MEDIA mode.
• If the media is not connected MEDIA mode will
not be activated.
SEEK
TRACK
When pressed quickly (less than 0.8 seconds),
• FM/AM mode: Plays the previous/next frequency.
• SiriusXM™ mode: Changes the channel.
• MEDIA (USB/iPod/My Music) mode: Changes
the track, file or title (except for USB Image and
AUX).
When pressed and held down (more than 0.8 seconds),
• FM/AM mode: Continuously changes the frequency until the key is released.
• MEDIA (USB/iPod/My Music) mode: Rewinds
or fast forwards the track or file (except for USB
Image, Bluetooth Audio, and AUX).
POWER/
VOL
• When power is off, press to turn power on.
• When power is on, press and hold (more than
0.8 seconds) to turn the power off.
• When power is on, press quickly (less than 0.8
seconds) to turn Audio off.
• Turn left/right to adjust the volume.
UVO
SETUP
TUNE
RESET
Displays the Bluetooth phone mode.
Moves to the Apps/Info screen.
Moves to the UVO mode
Moves to the Setup screen.
• FM/AM mode: Changes the frequency.
• SiriusXM™ mode: Changes the channel.
• MEDIA (USB/iPod/My Music) mode: Changes
the track, file or title (except USB Image,
Bluetooth Audio, and AUX).
Resets the system settings. (Preset radio channels
and other data will not be deleted)
※ The actual feature in the vehicle may differ from the illustration.
01
Head Unit
Description
Component Names and Functions I 1-5
Steering Wheel Controls
Description
When pressed quickly (less than 0.8 seconds),
• Activates voice recognition.
When pressed and held (more than 0.8 seconds),
• Ends voice recognition.
• If iOS device is connected through Bluetooth,
activates or ends Siri Eyes Free.
MODE
VOL +
VOL -
• Each time this is pressed, the mode is changed in
the following order: FM → AM → SiriusXM → USB
or iPod → AUX → Bluetooth Audio → My Music →
→ FM
• If the media is not connected, the corresponding
modes will be disabled
• Press and hold (more than 0.8 seconds) to turn
the Audio system on/off
• When power is off, press button to turn power
back on
Controls the volume
When pressed quickly (less than 0.8 seconds),
• FM/AM mode: searches broadcast frequencies
saved to Presets
• SiriusXM™ mode: searches broadcast channels
saved to Presets
• MEDIA (USB/iPod/My Music) mode: changes the
track, file or title (except USB Image, AUX)
When pressed and held (more than 0.8 seconds),
• FM/AM mode: automatically searches broadcast
frequencies
• SiriusXM™ mode: automatically searches broadcast channels
• MEDIA (USB/iPod/My Music) mode: quickly
looks up songs (excluding USB images, AUX and
Bluetooth audio files)
Name
Description
When pressed quickly (less than 0.8 seconds),
• When pressed in the dial screen, makes a call
• When pressed in the incoming call screen,
answers the call
• When pressed during call waiting, switches to
waiting call (Call Waiting)
When pressed and held (more than 0.8 seconds),
• When pressed in Bluetooth® Hands-free, redials
the last dialed call
• When pressed during a Bluetooth® Hands-free
call, switches call back to mobile phone (Private)
• When pressed while calling on the mobile phone,
switches call back to Bluetooth ® Hands-free
(operates only when Bluetooth® Hands-free is
connected)
• When pressed during a call, ends the phone call
• When pressed in the incoming call screen, rejects
the call
※ The actual feature in the vehicle may differ from the illustration.
01
Name
Component Names and Functions I 1-7
Starting the System for
the First Time
Turning the System On/Off
NOTICE
• You cannot operate the system while it is
booting up. It may take some time for all of
features of the system, particularly the voice
recognition system, to be ready for use.
Press the engine start button or set the
ignition key to On or ACC. Each time you
Pressing and holding the power key on the
turn on the system, a boot logo and safety
head unit will turn off the system.
warning will appear.
You can change Screen Saver Settings
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET key for a second or longer. (It is recommended that you
press the RESET key using a tool, such as
a pin or a clip.)
in Setup to display a clock on the Screen
Saver.
i Information
• If you turn off the system during a phone call
using the Hands-free feature, then the call will
automatically switch to your mobile phone.
will display the safety guide. To change the
system language between English,
French, Spanish and Korean, select the
Language button.
NOTICE
• Check the volume when turning on the
system. Before turning on the system, adjust
the volume to a reasonable level.
01
Pressing the power key on the head unit
Starting the System for the First Time I 1-9
Battery Warning Message
Always use the system while the car
Restrictions on Features for
Safety Measures
engine is running. If you turn on the sys-
Several features are limited while driving.
tem while the engine is off, a battery warn-
The restriction screen will disappear when
ing message will appear. When the engine
shifting gears into P or putting the parking
starts, the message will disappear.
brake on.
WARNING
- Blank Screen
• Refrain from use if the screen is blank or
no sound can be heard as these signs may
indicate product malfunction. Continued use in
such conditions could lead to accidents (fires,
electric shock).
NOTICE
• If you use the system for a long time with
the engine off, the battery may become
completely discharged.
1-10 I Basic
WARNING
- Touching the Antenna During A
Thunder Storm
• Do not touch the antenna during thunder or
lightning as such acts may lead to lightning
induced electric shock.
Home Screen
Information Display on the Status Bar
Controls Menu Configuration for the Home Screen
Displays the date and time, along with the system status shown by
Tap the
the various icons to the right of the clock.
icon on any screen to display the Home Screen below.
The icons in the following table indicate the various types of system status details and events.
Icon
Description
Displayed when the audio is muted.
Displays the remaining battery of the Bluetooth phone.
Displayed when connected to Bluetooth for handsfree.
Displayed when connected to Bluetooth for streaming audio.
Displayed when connected to Bluetooth for streaming audio and handsfree.
Displayed when downloading contacts or recent calls from the Bluetooth phone.
Description
Radio/
Media Widget
• Shows brief information on the radio or
media that is now playing.
• Tap the area to move to the mode that
you are listening to.
Connectivity
Widget
Shows any connected devices such as iPod,
and Bluetooth.
All Menus
Shows all of the items in the system menu.
My Menu
• You can add up to eight menus here.
• Add your favorite menus to have quick
and easy access to them.
Apps/Info
Moves to the Apps/Info screen.
Setup
Moves to the Setup screen.
Displayed while on a call with the Bluetooth phone.
Displayed when the microphone of the Bluetooth is muted.
Displays the signal strength of the Bluetooth phone.
Displayed when connected to Wi-Fi.
Displayed when connecting to Wi-Fi.
Displayed when 911 connect is available.
01
Features
Starting the System for the First Time I 1-11
On-Screen Touch Controls
Adding Your Favorite Menu Items to My
Menu
Learn how to touch the screen to operate
Select a menu or item you want, then drag
From the Home screen, select
the system.
and drop it to where you want to place it.
icon, and then
Edit
My Menu
Drag & Drop
From the Edit My Menu screen, select
Select
menu items from the list on the right, then
Tap lightly on a menu or an item to select it.
drag and drop them to a desired place on
the left.
To remove the item from My Menu, drag
item from the left and drop them on the right.
NOTICE
• The system will not recognize your touch if
you wear a glove or other non-conductive
material. Touch the screen using your finger,
an electrostatic touch-screen glove, or a stylus
pen.
Drag or touch the slider along the play bar
in the music screens to jump to the point
that you want to play from.
i Information
• Up to eight items can be added to My Menu.
1-12 I Basic
Flick (Quick Scrolling)
Drag the frequency bar to the left or right
You can view the previous or next image
to move to the frequency that you want.
by flicking left/right on an image on the
Quickly moves up and down in the list.
USB Image screen.
NOTICE
• Moving the list when there are many items will
display a handler on the right of the display.
You can easily move many items at a time
with the handler.
drop icons to add, delete, or move to/from
Flick left/right on the frequency bar in the
My Menu.
radio player to look up the previous/next
frequency available.
Starting the System for the First Time I 1-13
01
From the Edit My Menu screen, drag and
Press and Hold
Pressing the
and
buttons
in the music player will fast forward/rewind
the music.
1-14 I Basic
part.2
Radio/Media
FM/AM (with HD Radio™)
HD Radio™ Technology (if equipped)
FM/AM
SiriusXM™
USB
iPod
AUX
Bluetooth® Audio
My Music
Radio/Media
FM/AM (with HD RadioTM)
You can access the radio player either by pressing the
Features
Description
Preset
Frequencies
• The stored preset frequencies are displayed
for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
• Flick the preset frequencies up/down to scroll
quickly through presets.
Frequency Bar
• Flick the frequency bar left/right to search for
available radio channels to the left or right of
the current channel.
• Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want.
Frequency
Displays the current frequency.
Tag
Saves the current music’s tag information to the
head unit. If connected to iPod, the tag information can be saved on the device.
Presets
Shows the stored presets for user selection.
Menu
• List
Moves to the frequency list.
• Info
Turns the Radio text information transmitted
from the broadcasting station on and off.
• Preset Scan
Plays preset frequencies for 10 seconds per
item.
• Sound Settings
Moves to the Sound Settings.
RADIO
key or by selecting the Radio menu from All Menus on the Home
screen.
FM/AM Mode Display Controls
i Information
• If you press the RADIO key when power is off, the power will turn on
and a radio broadcast will be tuned from the current mode.
• If you are in radio mode, select the media widget from the Home screen
to access the radio player.
2-2 I Radio/Media
Description
Scan/Preset
Scan
Displays an active mode from Scan and Preset
Scan modes.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
HD Radio
(if equipped)
Used to set whether to turn HD Radio™ reception On or Off.
Scan
Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per
item.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Seeks the previous/next frequency.
• When pressed and held (more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the
button, the system seeks the next available
frequency.
TUNE
TUNE knob to manually seek availTurn the
able frequencies.
• FM: Increment/decrement by 200 kHz
• AM: Increment/decrement by 10 kHz
02
Features
FM/AM (with HD Radio™) I 2-3
HD Radio™ Technology (if equipped)
If an HD Radio™ broadcast is received,
the radio mode will switch from analog
Program Service Data:
broadcast to HD Radio™ broadcast.
Contributes to the superior user experience of HD
Radio™ Technology. Presents song name, artist, station IDs, HD2/HD3
Channel Guide, and other relevant data streams.
Adjacent traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.
Digital, CD-quality sound. HD Radio™ Technology
enables local radio stations to broadcast a clean digital
signal. AM sounds like today’s FM and FM sounds like a CD.
2-4 I Radio/Media
i Information
• The HD Radio™ screen is displayed only
when a HD Radio™ broadcast is being
received.
Name
Description
HD Radio™
Reception &
Channel buttons
Displays main HD Radio™ channels and
used to directly select the current available
channels.
The HD Radio™ related icon display
becomes active within regions where an
HD Radio™ signal can be received.
HD Channel
Number
Analog station and corresponding HD
Radio™ channel number saved in the preset list.
HD Broadcast
Info
Displays detailed information about the current broadcast (the details of the information
shown are different depending on whether
the Info button is selected)
HD Radio
When the HD Radio™ soft button is ON
(the red indicator on the HD Radio™ button
is illuminated), HD Radio™ signals will be
received.
02
HD Radio™ Mode Display Controls
HD Radio™ Technology (if equipped) I 2-5
FM/AM
You can access the radio player either by pressing the
Features
Description
Preset
Frequencies
• The stored preset frequencies are displayed
for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
• Flick the preset frequencies up/down to scroll
quickly through presets.
Frequency Bar
• Flick the frequency bar left/right to search for
available radio channels to the left or right of
the current channel.
• Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want.
Frequency
Displays the current frequency.
Presets
Shows the stored presets for user selection.
Menu
• List
Moves to the frequency list.
• Preset Scan
Plays preset frequencies for 10 seconds per
item.
• Sound Settings
Moves to the Sound Settings.
RADIO
key or by selecting the Radio menu from All Menus on the Home
screen.
FM/AM Mode Display Controls
i Information
• If you press the RADIO key when power is off, the power will turn on
and a radio broadcast will be tuned from the current mode.
• If you are in radio mode, select the media widget from the Home screen
to access the radio player.
2-6 I Radio/Media
Description
Scan/
Preset Scan
Displays an active mode from Scan and Preset
Scan modes.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
Info
Turns the Radio text information transmitted
from the broadcasting station on and off.
Scan
Shortly plays the broadcasts for the frequencies
with superior reception for 5 seconds per item.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Seeks the previous/next frequency.
• When pressed and held (more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the
button, the system seeks the next available
frequency.
TUNE
TUNE knob to manually seek availTurn the
able frequencies.
• FM: Increment/decrement by 200 kHz
• AM: Increment/decrement by 10 kHz
02
Features
FM/AM I 2-7
SiriusXM™
You can access the radio player either by pressing the
Features
RADIO
key or by selecting the Radio menu option from All Menus on the
Preset
Frequencies
• Shows the stored presets for user selection.
• After selecting frequency, press and hold
the preset button for more than 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
Channel Logo
Displays the current channel logo.
Channel Info
Displays the current channel number and
name.
Content Info
Displays the artist, title and other information
about the current playing song.
Category Info
Displays the category of the currently playing
song.
Band
Changes to the desired band from among FM,
AM, and SiriusXM.
Direct Tune
Used to search for the desired channel by
entering the channel number.
Scan
Plays all receivable channels for 10 seconds
per item.
Category Lock
If pressed, only the channels for the current
category can be searched or scanned.
Category
Selection Buttons
Used to select the previous/next category.
Play Live
Switches to the live broadcast mode.
Skip Backward
Repeats the previously broadcasted program.
• Holding for less than 0.8 seconds: Moves to
the previous segment.
• Holding for more than 0.8 seconds: Moves
to the previous 5 seconds.
Home screen. Select the SiriusXM™ band from the radio player.
SiriusXM™ Mode Display Controls
i Information
• If you press the RADIO key when the power is off, the power will turn
on and a radio broadcast will be tuned from the current mode.
• If you are in the SiriusXM™ mode, select the SiriusXM™ radio widget
from the Home screen to access the radio player.
• When the power is off, pressing the RADIO key will turn the power on
and play a SiriusXM™ Radio broadcast.
2-8 I Radio/Media
Description
Description
Play/Pause
Pauses/plays the current broadcasting program.
Skip Forward
Moves to the next segment.
Tag
Saves the current music’s tag information to the
head unit. If connected to iPod, the tag information can be saved on the device.
Presets
Shows the stored presets for user selection.
List
Moves to the channel list.
Menu
• What is on My Presets?
The program schedule saved in my preset. (For
more details, see Section 3.10. Viewing Menu.)
• Featured Favorites
Theme channels recommended by SiriusXM™.
(For more details, see Section 3.10. Viewing
Menu.)
• Preset Scan
Plays preset channels for 10 seconds each.
• Sound Settings
Moves to the Sound Settings.
SEEK/TRACK
• When pressed quickly (less than 0.8 seconds): Plays the previous/next channel.
• When pressed and held (more than 0.8 seconds): Continuously changes the channel
until the key is released and plays the current
channel.
TUNE
Changes the channel.
02
Features
SiriusXM™ I 2-9
Selecting through
Channel/Category List
Select the
List
▶ Select the desired cat-
egory and channel.
If you select the
Skip
scan channels using the
key or the
button, you can
SEEK
TRACK
TUNE knob by skipping the
channels that you chose to skip.
Viewing Menu
Using the
Menu
button on the right, you
can view the program schedule and information about the Featured Favorites provided by SiriusXM™.
Direct Tune
Enter the number of the channel you want
to receive.
Select the desired category and the channel. Once selected, the previous screen
will be restored and the selected channel
will begin playing.
2-10 I Radio/Media
What is on My Presets? (Program Schedule)
Name
Description
By selecting this option, you can select a broadcasting date.
Broadcast information will be provided for one
week from the current date.
Change
Broadcast
Date
Shows saved presets for user selection
A total of 40 frequencies for SiriusXM™ modes
can be displayed.
Program
Information
Shows you the program titles to be broadcasted
at the time that you have chosen.
Select a program to see more details.
If there is more information on the program you
selected, an arrow button will be displayed on
the right of the list. You can see more program
information by selecting the arrow button.
You can select Menu to see program information and the schedules of broadcast channels listed in the presets.
02
Preset
SiriusXM™ I 2-11
Featured Favorites
Featured Favor ites feature allows
SiriusXM™ to broadcast additional presets.
• Example 1: “Martha’s Favorites” may
represent Martha Stuart’s favorites presets on her radio.
• Example 2: During holidays, “Holiday
Music” may represent all the SiriusXM™
channels that are playing the holiday
music for easy access by users.
Multiple sets Featured Favorites data
can be broadcast by SiriusXM™ and can
change from time to time.
2-12 I Radio/Media
USB
• Take caution so that the USB connector does not come in contact with body parts or objects.
Before Playing a USB MP3
• Repeated connecting/disconnecting of USB devices within short
periods of time may result in product malfunction.
Connect the USB device after turning on the engine. The USB
device may become damaged if it is already connected when the
ignition is turned on.
• Make sure to connect/disconnect external USB devices with the
audio power turned off.
• The amount of time required to recognize the external USB
device may differ depending on the type, size, or file formats
played.
• For MP3/WMA/OGG files, only music files with compression
rates between 8Kbps ~ 320Kbps can be played.
• Heed caution to static electricity when connecting/disconnecting
external USB devices.
• Encoded MP3 Players will not be recognized when connected
as an external device.
• When connecting an external USB device, the device may not
properly recognize the USB is in some states.
• Only products formatted with byte/sectors under 64Kbyte will be
recognized.
• USB devices, formatted to the FAT12, FAT16, or FAT32 file system, are recommended. File systems other than FAT12, FAT16,
stored on the USB.
• The use of USB devices for purposes other than playing music
and image files is prohibited.
• Do not use the USB I/F to charge batteries or USB accessories
that generate heat. Such acts may lead to worsened performance or damage to the device.
• The device may not recognize the USB device if separately
purchased USB hubs and extension cables are being used.
Connect the USB directly with the multimedia terminal of the
vehicle.
• When using mass storage USB devices with separate logical
drives, only files saved to the root drive can be played.
• When application programs are installed to specific USBs, files
may not properly play.
FAT32, exFAT, and NTFS are not supported.
• Some USB devices may not be supported due to compatibility
issues.
USB I 2-13
02
• Files that are not standard format music/image files will not be
• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB
devices not recognized as portable disk drives) are connected
Plug Type Connector
with the device.
• Charging through the USB may not work for some mobile
devices.
• The device may not support normal operation when using a
USB memory type besides Metal Cover Type USB Memory.
• The device may not support normal operation when using for-
Product Name
Manufacturer
XTICK
LG
BMK
BMK Technology
SKY-DRV
Sky Digital
TRANSCEND JetFlash
Transcend
• When playing iPods, please use a dedicated iPod car cable.
Sandisk Cruzer
SanDisk
• Normal operation cannot be guaranteed when other cables are
Micro ZyRUS
ZyRUS
NEXTIK
Digiworks
mats such as HDD Type, CF, or SD Memory.
being used.
• The device will not support files locked by DRM (Digital Rights
Management).
• USB memory sticks used by connecting an Adaptor (SD Type or
CF Type) may not be properly recognized.
• Only use Plug type connector products, as shown in the figure
below.
• To play USB MP3, the USB device must be connected to the
USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
2-14 I Radio/Media
i Information
• Problems that occur through use of USB devices not listed within the
above table are not covered by the product warranty.
Supported USB MP3 music specifications
Name
MP3 File
Specification
Recommended
Bit Rates and
Sampling
Frequency
Description
Supported Image Specifications
Name
Description
Specification: MPEG1 AUDIO LAYER 3
Image format
JPG, GIF, BMP, PNG (animated GIF, etc. are not
supported)
Acceptable sampling frequency: 32, 44.1, 48 (kHz)
Supported image
file size
5M pixels for JPG, BMP, PNG (1M pixels maximum for GIF)
Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256, 320 (Kbps)
96, 128, 192 Kbps fixed bit rate/44.1kHz
ID3 Tag
Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3,
ID3v2.4 ID3 tags
Detailed
Specifications
Maximum directory layers: 20 layers
Maximum length of folder name/file name: 255Bytes
Supported characters for folder name/file name:
Alphanumeric characters, Korean standard character set 2,350 characters, Simplified Chinese 4888
characters
Maximum number of folders which can be stored
onto one USB: 2000 folders (including ROOT)
Maximum number of files which can be stored onto
one USB: 8000
i Information
02
• The sound quality of MP3 files that use bitrates exceeding
192 Kbps cannot be guaranteed. When using files without fixed bit rates,
some features (FF/REW features) may not properly operate.
USB I 2-15
USB Music Mode Display Controls
Features
Description
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
• If select the song in the file tab on the list
screen: Select the Repeat button to switch
between repeating one song, repeating
folder, and turning repeat off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Repeat button to switch between repeating one song and turning repeat off
Shuffle
Plays files in random order
• If select the song in the file tab on the list
screen: Select the Shuffle button to switch
between Shuffle Folder, Shuffle All, and turning shuffle off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Shuffle button to switch between Shuffle
Category and turning shuffle off
Description
Mode
Displays the current operating mode
File Index
Shows the current file/total files within the USB
Repeat/
Shuffle/Scan
From Repeat/Shuffle/Scan, displays the current
operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the information of the current track
• When a track in the file tab on the list screen
is selected: Displays folder, file, title, artist,
album info
• When a track in the other tabs on the list screen
is selected: Displays artist, title, album info
List
Moves to the list screen
Back Button
Converts to basic mode screen
2-16 I Radio/Media
Features
Features
Description
Menu
• Add to Playlist: Add the current track to the
Playlist: Playlist is placed on the left tab in the
list
• Save to My Music: You can save the current
track to My Music. You can play saved track
from My Music without USB. Access to My
Music in the Media mode.
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, select
the TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, the track
info for the current track is restored.
02
Scan
Scans the beginning parts of USB files (approx.
10 seconds per file)
• If select the song in the file tab on the list
screen: Select the Scan button to switch
between Scan Folder, Scan All, and turning
scan off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Scan button to switch between Scan
category and turning scan off
USB I 2-17
Features
Features
Displays folder/category name in the list
Current Song
Displays the current playing file name
Back Button
Converts to basic mode screen
Upper Folder/
Category
Moves to Upper Folder
2-18 I Radio/Media
Menu
• Add to Playlist: Adds the current track to the
Playlist: Playlist is placed on the left tab in the
list (Maximum 100 files) Select a desired track
and press “Add to Playlist” to add the track in
the playlist.
• Delete from Playlist: Select a track you want to
delete from the playlist and press “Delete from
Playlist” to delete the track in the playlist
• Now Playing: When moving to a different list
screen, moves to the list page where the current file is located (Becomes disabled when
the current list includes the current file)
• Save to My Music: Stores the music. The
stored music can be played in My Music. (This
function is not provided in Playlist.)
Search Menu
Search tracks by the list type. Search songs
according to File, Playlist, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or
fast-forward the track.
TUNE
TUNE knob to move the focus to the
Turn the
previous/next list. If the desired track is displayed,
press TUNE knob to play the track.
Description
Folder/
Category Name
Description
Features
Description
Mode
Displays the current operating mode
Folder/
File Name
Displays folder name where image is located
File Index
Shows the current file/total files within the USB
Slideshow
Images as slideshow in 5, 10, 20, 30 second
intervals
Rotate
Rotate image in clockwise direction
Info
Shows the file name, resolution and file type of
current image
Adjust Image
Size
Enlarge/reduce (zoom-in/zoom-out) image size
List
Moves to the list screen
Previous/
Next image
Swipe image left or right to see Previous/Next
image
02
USB Image Mode Display Controls
USB I 2-19
Features
2-20 I Radio/Media
Description
Current File
Displays the current playing file name
Back Button
Converts to basic mode screen
Menu
Now Playing: When moving to a different list
screen, moves to the list page where the current
file is located (Becomes disabled when the current list includes the current file)
SEEK/TRACK
Controls background mode
• Radio mode: Changes Frequency and Channel
• Media mode: Changes Track (excluding AUX)
TUNE
Controls background mode
• Radio mode: Changes Frequency and Channel
• Media mode: Changes track (excluding AUX).
If a desired track is displayed, press the knob
to move to the track.
Using iPod Devices
• iPod is a registered trademark of Apple
Inc.
• iPod mode will not operate if the con-
• If repeatedly connect and disconnect
• To listen to the iPod sound, reconnect
iPod/iPhone to the Multimedia system
the USB cable or change the audio out-
with USB cable in a short time, it may
cause abnormal operation.
put settings in iPod/iPhone to Dock.
• In order to use the iPod while operating
• The time for recognition of iPod/iPhone
the keys, you must use a dedicated iPod
may vary depending on device type,
cable. (the cable that is supplied when
firmware version and iOS version.
to operation of unsupported versions
• For some iPod Touch and iPhone
purchasing iPod/ iPhone products)
※ During ACC ON state, connecting the
that do not support related protocols,
devices, connecting Bluetooth® while the
iPod through the iPod cable (The cable
iPod abnormalities, or iPod device
iPod is operating may result in discon-
that is supplied when purchasing iPod/
defects. Some iPods with unsupported
tinued iPod sound. When such devices
iPhone product.) will charge the iPod
communication protocols may not prop-
with Bluetooth® support are connected,
erly operate with the Multimedia system.
this problem occurs as the sound source
through the head unit.
※ The use of genuine iPod cables sup-
• For fifth generation iPod Nano devices,
is changed from the Dock Connector
plied by Apple is recommended. (The
(USB connector cable) to Bluetooth.
use of other products may result in
nected iPod cannot be recognized due
the iPod may not be recognized when
the battery level is low. Please charge
• To prevent this symptom, Bluetooth
Audio function in the Multimedia system
noise or abnormal operation.)
※ To play iPod music through cable con-
• Search/play orders shown within the
is limited if iPod/iPhone is connected
nection, the iPod/USB cable must be
iPod device may differ with the orders
to the system through both cable and
connected to the USB port in the front
shown within the Multimedia system.
Bluetooth. To listen to the iPod sound,
multibox. The USB port in the center
• If the iPod malfunctions due to an iPod
use either iPod menu with USB connec-
console storage (if equipped) is for
device defect, reset the iPod and try
tion or Bluetooth Audio with Bluetooth
charging only.
again. (To learn more, refer to your iPod
connection.
the iPod for use.
manual)
iPod I 2-21
02
iPod
• When connecting with the iPod cable,
• In Apple’s iOS 6.0 version or later,
make sure to fully insert the jack to pre-
Podcast and Audiobook media files
vent communication interference. If the
are designed to be played with the
iPod is connected to the vehicle while it
Podcasts and iBooks applications spe-
is playing, a high pitch tone may sound
cifically designed for Apple products. If
for about 1~2 seconds immediately
the Apple device does not provide the
after connection. If possible, connect
Podcast and Audiobook lists, the playlist
the iPod to the vehicle with the iPod
may not be displayed and played in the
stopped/paused.
iPod mode.
• Within iPhones, streaming audio and
• If the Apple Podcasts and iBooks apps
iPod control may occasionally conflict.
are not installed on the Apple device, but
If problems persist, remove the iPhone
the Apple device provides the Podcast
and connect again.
and Audiobook lists, you can play files in
• When connecting to iPod Nano/Classic,
other categories in iPod mode.
the Kia Motor logo appears on the Apple
• The screen of multimedia system can
device. For the iPod Nano 6 genera-
be different when you run other music
tion, however, the logo image does not
players (e.g. iHeartRadio) on your con-
appear since it is not supported. Also, all
nected device.
iPhone and iPod Touch products do not
support this function.
2-22 I Radio/Media
• If you control pause, repeat, shuffle, or
• We recommend that your Apple device
seek songs when the play time is less
uses the latest firmware since some
• While using a connected iPhone/iPod
than 3s before the song is finished play-
problems may occur due to an outdated
Touch device, it may not operate nor-
ing, it may occur difference of playing
firmware or other software related
mally if the user changed some func-
song between the Multimedia system
issues.
tions in the device.
and Apple device. Access to iPod music
• When calling with an iPhone connection, song may stop playing due to an
Apple device feature. If sound does
not resume after the call is terminated,
check the device status.
• If lots of songs have the same information, skipping may occur when previous/
from another mode or pause a song and
then play a song again in Apple device.
Type
1G
• If lots of songs have the same information, the song that plays may be different between the system and the Apple
device. Reset the device or delete the
5G
Not Supported
Not Supported
iPod Nano
○
iPod Touch
(iOS 1.1
not supported)
○
○
○
○
○
○
○
○
6G
6.5G
7G
○
Not
released
○
○
Not released
iPad
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPad Mini
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPod Classic
Not Supported
○
○
○
(iPod with
Video)
(iPod
Classic)
(iPod
Classic)
Not
released
Type
3G
3GS
4S
5C
5S
6+
iPhone
Not verified,
Normal
working not
guaranteed
○
○
○
○
○
○
○
○
same songs in the Apple device using
iTunes.
4G
iPod Mini
occur depending on device type or iOS
version.
3G
iPod Shuffle
next song is executed due to an Apple
device feature. Also problems may
2G
iPod I 2-23
02
Caution
Caution
• If connect to the Multimedia system
while podcast or iTunes music down-
• If the iPhone/iPod Touch supports
loading to iPod/iPhone, it may occur
Bluetooth, the Apple device will not be
some problems when you select song
able to use the Bluetooth function if the
in the list. Reconnect iPod/iPhone to the
device is connected through both the
Multimedia system when downloading
USB port and via Bluetooth. Disconnect
the USB connection then use Bluetooth
Audio.
is finished or the file deleted.
• If connect to the Multimedia system
while sync, it may occur some problems.
• If iPod/iPhone connected to the
Try to use iPod/iPhone connection after
Multimedia system through both USB
sync complete. (To learn more, refer to
and AUX. iPod/iPhone keeps output
your iPod manual)
sound via AUX, thus it may occur sound
will not output in iPod mode.
• iPhone and iPod Touch devices are
guaranteed to work normally on iOS
• If AUX cable connected to iPod/iPhone
9.3.2 or below. However, they may not
but not connect to the Multimedia sys-
work normally on future iOS versions
tem, it may occur sound will not output
as their operations have not yet been
in iPod mode due to iPod/iPhone’s fea-
tested.
ture. Especially, if you use AUX cable
like pictures, this problem may occur.
• Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone.
2-24 I Radio/Media
Features
Features
Description
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
Select the Repeat button to switch between
repeating 1 track, and turning repeat off
Shuffle
Plays files in random order
When selecting the Shuffle button, it changes to
shuffle category → deactivate shuffle then
repeat
• Shuffle Category: Shuffle song in the current
category
Back Button
Move to home/previous mode screen
Menu
Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the sound.
Description
Mode
Displays the current operating mode
Song Index
Shows the current song/total songs
Repeat/Shuffle
From Repeat/Shuffle, displays the current operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the artist/song title/album info
List
Moves to the list screen
iPod I 2-25
02
iPod Mode Display Controls
Features
TUNE
2-26 I Radio/Media
Description
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press
the TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, the track info
for the current track is restored.
Features
Description
Displays the category name
Category List
Displays the contents of selected category
If there are many items in the list, items are
added in order and the scroll bar on the right
is adjusted accordingly.
Back Button
Converts to basic mode screen
Upper Category
Moves to Upper Category
Search Menu
Search tracks by the list type. Search songs
according to Playlist, Artist, Song, Album,
Genre, Composer, Podcast and Audiobook.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind
or fast-forward the track.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press
the TUNE knob to play the track.
If you do not anything with the knob for
TUNE knob search will be
5 seconds, the
terminated.
02
Category Name
iPod I 2-27
AUX
Connecting an External Device
If an external device connector is connected with the AUX terminal, then AUX
mode will automatically operate. Once the
connector is disconnected, the previous
mode will be restored.
• AUX mode can be used only when an
NOTICE
• If only a cable is connected to the AUX
without an external device, the mode will
be changed to AUX, but noise may occur.
When an external device is not being
used, remove the connector jack.
• When the exter nal device power is
connected to the power jack, playing the
external device may output noise. In such
cases, disconnect the power connection
before use.
external audio player has been connected.
• The AUX volume can also be controlled
separately through the connected
device.
※ The actual feature in the vehicle may
differ from the illustration.
2-28 I Radio/Media
Features
Title
Name of current song
Previous File
• If play time is less than 3 seconds, moves to
the previous file
• If play time is more than 3 seconds, plays the
current file from the beginning
This function may differ depending on the
model of mobile phone.
Play/Pause
Plays/Pauses Bluetooth Audio
Next File
Moves to the next file
Repeat
Repeats the current file.
This function may differ depending on the
model of mobile phone.
Shuffle
Plays files in random order.
This function may differ depending on the
model of mobile phone.
Menu
• Connections: Moves to the Bluetooth Settings
screen. You can pair a new device or change/
delete paired device(s).
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
SEEK/TRACK
Plays the previous/next file
Bluetooth Audio Mode Display Controls
Features
Description
Mode
Displays the current operating mode
Phone Name
Displays name of connected phone
Artist Info
Name of current artist
Description
TUNE
TUNE is not supported
02
Bluetooth® Audio
i Information
• Artist info and Title may not be supported by mobile phone
Bluetooth® Audio I 2-29
Bluetooth Connection Settings
Settings for pairing, connection and disconnection of a Bluetooth device.
• In Bluetooth Audio play screen, select
Menu and then Connections .
i Information
• If the music in the mobile phone is not
played after changing to audio streaming
mode, press the play button. Thus check if
the music is playing in the Bluetooth device
after changing to audio streaming mode.
Audio streaming may not be supported for
some mobile phones.
• Please check the Bluetooth compatibility
in below website: KIA Motors Corporation
http://www.kia.com
2-30 I Radio/Media
Features
List
Moves to the list screen
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
• If select the song in the file tab on the list
screen: Select the Repeat button to switch
between repeating one song and turning
repeat off.
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Repeat button to switch between repeating one song and turning repeat off
My Music Mode Display Controls
Features
Description
Mode
Displays the current operating mode
File Index
Shows the current file/total files
Repeat/
Shuffle/Scan
From Repeat/Shuffle/Scan, displays the current operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the information about the current track
• When a track in the file tab on the list screen is
selected: Displays file, artist, title, album info
• When a track in the other tab on the list
screen is selected: Displays artist, title,
album info
Description
02
My Music
My Music I 2-31
Features
2-32 I Radio/Media
Description
Shuffle
Plays files in random order
• If select the song in the file tab on the list
screen: Select the Shuffle button to switch
between shuffle and turning shuffle off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Shuffle button to switch between shuffle
and turning shuffle off
Scan
Scans the beginning parts of files (approx. 10
seconds per file)
• If select the song in the file tab on the list
screen: Select the Scan button to switch
between scan and turning scan off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Scan button to switch between scan and
turning scan off
Menu
• Add to Playlist: Adds the current song to the
Playlist: Playlist is placed on the left tab in the list
• Delete Current File: Deletes the current track
from My Music.
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the sound.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press the
TUNE knob to play the track.
If the
TUNE knob is not pressed within
5 seconds of searching tracks, the track info
for the current track is restored.
Features
Menu
• Add to Playlist: Adds the current track to the
Playlist: Playlist is placed on the left tab in the
list (Maximum 100 files) Select a track and
press “Add to Playlist” to add the track in the
playlist
• Delete from Playlist: Select a track from the
playlist and press “Delete from Playlist” to
delete the track in the playlist
• Delete Files: Deletes files from My Music
If delete file from My Music, the information
related to song also deleted in the list.
• Now Playing: When moving to a different list
screen, moves to the list page where the current file is located (Becomes disabled when
the current list includes the current file
Search Menu
Search tracks by the list type. Search songs
according to File, Playlist, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or
fast-forward the track.
TUNE
TUNE knob to move the focus to preTurn the
vious/next file. If the file you want to play is displayed, press TUNE knob to play the track.
TUNE knob is not pressed within
If the
5 seconds of searching tracks, Tune search
will be terminated.
Description
Folder/
Category Name
Displays folder/category name in the list
Current Song
Displays the current playing file name
Back Button
Converts to basic mode screen
Upper Folder
Moves to Root Folder
Description
My Music I 2-33
02
Features
MEMO
part.3
Bluetooth
®
Before Using the Bluetooth Handsfree
Bluetooth Connection
Bluetooth Phone
Bluetooth
Before Using the
Bluetooth® Handsfree
®
• The Bluetooth Handsfree feature may
What is Bluetooth ®
Wireless Technology?
Precautions for Safe Driving
®
not be supported in some mobile phones.
• Bluetooth is a feature that enables driv-
For more information on mobile phone
ers to make handsfree calls. Connecting
compatibility, visit the KIA Motor website
the head unit with a Bluetooth phone
- KIA Motors Corporation: http://www.kia.com
allows the user to conveniently make
• Bluetooth® Wireless Technology refers
®
calls, receive calls, and manage the
®
to a short-distance wireless network-
WARNING
phonebook. Before using Bluetooth
ing technology which uses a 2.45GHz
- Distracted Driving
Wireless Technology, carefully read the
frequency to connect various devices
within a certain distance.
• Supported within PCs, external devices,
®
Bluetooth phones, PDAs, various electronic devices, and automotive environ®
ments, Bluetooth Wireless Technology
to be transmitted at high speeds without
having to use a connector cable.
®
• Bluetooth Handsfree refers to a device
which allows the user to conveniently
make phone calls with Bluetooth
®
mobile phones through the Multimedia
system.
3-2 I Bluetooth
• Focus on the road while driving. The driver's
primary responsibility is in the safe and legal
operation of the vehicle. Drivers should not
use any hand held devices or other equipment
or vehicle systems that distract the driver
during vehicle operation.
• Do not stare at the multimedia screen for long
periods of time while driving. Staring at the
screen for prolonged periods of time can lead
to traffic accidents and can result in personal
injuries.
contents of this user’s manual.
• Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do
not operate the device excessively while
driving.
• Viewing the screen for prolonged periods of time is dangerous and may lead
to accidents. When driving, view the
screen only for short periods of time.
CAUTIONS upon Connecting
Bluetooth® Phone
• If you do not want automatic connection
®
with your Bluetooth device, turn the
• Before connecting the head unit with the
mobile phone, check to see that the mobile
®
phone supports Bluetooth features.
• Even if the phone supports Bluetooth
®
®
Bluetooth feature off of the Bluetooth
may differ depending on the mobile
phone.
®
• Pairing Bluetooth devices and use of
device.
• Park the vehicle when connecting the
®
• The Handsfree call volume and quality
head unit with the mobile phone.
®
®
other Bluetooth features are not supported when the vehicle is in motion. For
Wireless Technology, the phone will
• Bluetooth connection may become
not be found during device searches if
intermittently disconnected in some
• If you continue having issue download-
the phone has been set to hidden state
mobile phones. Follow these steps to try
ing your contacts to your vehicle, con-
again.
tact your mobile phone provider.
Disable the hidden state or turn on the
®
Bluetooth power prior to searching/
connecting with the head unit.
• I f Au t o C o n n e c t i o n i s u s e d , t h e
®
Bluetooth phone is automatically connected when the ignition is turned on,
making it unnecessary to have to connect the phone with the head unit every
time.
®
1. Turn the Bluetooth function within the
mobile phone OFF/ON and try again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile phone
battery, reboot, and then again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both of
Phone and Head Unit sides and then
try again.
03
®
or the Bluetooth power is turned off.
safety, please first park your vehicle.
Before Using the Bluetooth® Handsfree I 3-3
Bluetooth Connection
Pairing a New Device
Pairing a New Device Through the
Phone Settings
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
Connects the Bluetooth devices that you
Press the
key. ▶ Select Bluetooth .
▶ Select Bluetooth Connection . ▶ Select
add.
. ▶ Pair your car after your mobile
phone detects the Bluetooth device. ▶
Connecting Devices by Selecting
Phone/Call
Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.
Press the
SETUP
Before you can use the Bluetooth feature,
Connecting Bluetooth Devices
Add New
nected at a time.
key or
key in
the steering wheel control. ▶ Select the
name of the device to connect. ▶ Connect
Bluetooth.
Pairing a New Device by Selecting
Phone/Call
Press the
PHONE
key or
key in
the steering wheel control. ▶ Pair your car
after your mobile phone detects the
Bluetooth device. ▶ Enter the passkey or
accept the authorization popup. ▶
The default passkey is 0000.
Connect Bluetooth.
The vehicle name above is an example.
Check the actual information on the product.
3-4 I Bluetooth
PHONE
Press the
key. ▶ Select Bluetooth .
▶ Select Bluetooth Connection . ▶ Select the
SETUP
Disconnecting
Bluetooth Devices
Deletes the Bluetooth devices that you
Disconnects Bluetooth devices that are
added. Note that deleting a Bluetooth
connected.
device will delete all Call History and
name of the device to connect. ▶ Connect
Bluetooth.
Deleting Bluetooth Devices
Contact Info downloaded along with it.
Press the
▶ Select
key. ▶ Select Bluetooth .
Bluetooth Connection . ▶ Select the
SETUP
name of the device to disconnect.
Press the
Select
SETUP
key. ▶ Select
Bluetooth Connection
Delete Devices
Bluetooth
.▶
. ▶ Select
. ▶ Select the device name
to delete. ▶ Select
Delete
03
Connecting Devices Through the
Phone Settings
Bluetooth Connection I 3-5
Bluetooth Phone
Phone Status Icons
Shows the current phone status in the
right top of the display.
Icons
Description
You can use Bluetooth phones
when a Bluetooth Hands-free
connection is established.
You can use Bluetooth audio
features when a Bluetooth
audio connection is established.
You can use Bluetooth phones
and audio features when both
Bluetooth Hands-free and audio
connections are established.
Call signal strength indicator
Battery level of the Bluetooth
devices connected
Downloading Call History list
Downloading Contacts
In a Bluetooth phone call
Microphone muted
3-6 I Bluetooth
i Information
• The battery level icon and the call signal
strength indicator may not be supported in
some Bluetooth devices.
• The battery level may differ from the actual
level remaining.
Name
Keypad
Use the keypad to enter
the phone number that you
want to call. Press and hold
the last number of a speed
dial to dial a number that
you added to the Speed
Dial list in the phone
Call
Makes a call after you dial
a number and select CALL.
If the number is listed in
Dialed Calls, you can select
the number and press
CALL to automatically dial
that number again.
Dials a call after the Bluetooth devices are
connected.
• Press the
PHONE
key or
key in
the steering wheel control.
• You can also select All Menus icon, and
then
Phone
Description
icon.
Settings
Moves to a screen of
Phone Settings.
Delete
Deletes the numbers that
you entered.
Accept/Reject Call
If there is an incoming call after you made
a Bluetooth connection, a popup message
will appear.
Name
Description
Accept
Answers the call.
Reject
Ignores the call.
i Information
• Some types of mobile phones may not
support the Speed Dial function.
i Information
• In some mobile phones, the caller's number
may not be displayed, and the Reject feature
may not be supported.
03
Dial
Bluetooth Phone I 3-7
Using the Menu During
a Phone Call
When making a call, you can use the following menu items.
3-8 I Bluetooth
Name
Description
Use Private
Switches a voice call
from the car Hands-free
to the mobile phone.
End
Ends a call.
Contacts
Displays the Contacts list.
Outgoing
Volume
Displays the Mic Volume
settings. You can adjust
the in-call volume that
the other party hears
(level 1 - 5).
Keypad
Moves to a screen for
entering ARS numbers.
Switch
Switches to a call on
hold, if any. You can also
switch calls by selecting the number in the
Information Display. The
Switch function switches
the current call to a waiting call in order to answer
a new incoming call.
i Information
• If the caller's number is listed in Contacts, the
caller's name will be displayed. Otherwise,
only the number will be displayed. In some
mobile phones, the phone number may not
be displayed.
• In some Bluetooth devices, the Use Private
feature may not be supported.
• In some Bluetooth devices, the Switch feature
may not be supported.
• During a phone call on a Bluetooth Handsfree, you cannot access other modes, such as
Radio and Settings.
• Depending on handset types, the in-call
volume the other party hears may differ. If the
other party hears your voice too low or too
loud, adjust the mic volume.
i Information
Press the
PHONE
Name
key, and then
Call History
Description
All
Lists the all call history.
Dialed
Lists the calls that you
made.
Received
Lists the calls that you
have received.
Missed
Lists the calls you
missed.
Call History
Displays all of your call
history. Select from the
list to dial the number.
Download
Downloads the call
history information from
your mobile phone.
• In some mobile phones, call records may not
be added to your Call History.
• Calls from restricted ID's are not added to
your Call History Information.
• Up to 50 calls can be added in each Dialed
Calls/Received Calls/Missed Calls list.
• The durations of each dialed/received call are
not displayed in your car's Call History list.
• While the call history download is in progress,
the status bar displays an icon ( ).
• If the call history download is turned off on the
Bluetooth device, the call history download
will fail.
• Some devices require a device authentication
for downloading your call history. If download
fails, check if the Bluetooth settings or display
status are normal.
• Some devices do not support call history
download. Check if your Bluetooth device
supports download feature. For details regarding
Bluetooth-supported devices and their functional
compatibility, visit http://www. kia.com
03
Call History
Bluetooth Phone I 3-9
i Information
Contacts
Press the
PHONE
Name
key, and then
Contacts
Description
Contacts List
The list of Contacts.
Select from the list to
dial the number.
Download
Downloads contacts
from your mobile phone.
Search
Searches Contacts.
3-10 I Bluetooth
• U p t o 5 0 0 0 p h o n e nu m b e r s c a n b e
downloaded from a single, paired Bluetooth
device.
• You cannot edit or delete downloaded phone
numbers from your car.
• Contacts can be viewed only when the
Bluetooth device is connected.
• Even if the Bluetooth device is disconnected,
the downloaded data will remain. (Note that
deleting a paired phone will also delete all
downloaded Contacts and Call History data)
• Downloaded phone numbers may be lost
depending on the condition of the head unit.
Keep your important data in a safe place.
• Contacts from both the SIM card and your
mobile phone are downloaded at the same
time by default.
• The status bar displays a ( ) while
downloading contacts.
• The download will not be available if the
contacts download function is turned off on
your Bluetooth device.
• Some devices require a device authentication
for downloading your contacts. If download
fails, check your phone screen and confirm
the download if necessary.
• Some devices do not support contacts
download feature. Check if your Bluetooth
device supports contacts download. For
Bluetooth supporting devices details and
compatibility, visit http://www.kia.com
Favorites
PHONE
key, and then
Favorites
Name
Description
Favorites
Lists the phone numbers saved as Favorites.
Select from the list to
dial the number.
Add New
Adds a new number to
Favorites.
Delete Items
Deletes numbers
that you select from
Favorites.
Delete All
Deletes all of the numbers from Favorites.
03
Press the
Bluetooth Phone I 3-11
MEMO
part.4
UVO eServices
The 911 Connect feature may not operate in the following situations
About UVO eServices
Before using UVO eServices
Connecting Bluetooth
Pair a device from Bluetooth-enabled phone
Connecting to smartphone via USB
911 Connect
Roadside Assist
Vehicle Diagnostics
My Car Zone
Parking Minder
eServices Guide
UVO eServices
The 911 Connect feature may not
operate in the following situations
When the vehicle ignition is not turned on.
®
When the phone Bluetooth feature is set to off.
®
When the system power supply is unstable.
When the attempted call is blocked due to user operations.
When the phone Bluetooth cannot be connected or becomes
When the 9-1-1 call is unstable due to phone or other commu-
disconnected.
nication network issues.
When there are no phones paired with the vehicle.
When the call feature is not operating due to phone settings set
by the user.
When cellular service is unavailable.
®
When the phone cannot be controlled via Bluetooth due to
When the power turns off due to phone power (battery) issues.
®
When a Bluetooth device without phone feature support has
been connected, such as an MP3 device.
When the system is booting.
4-2 I UVO eServices
phone specifications or characteristics.
Using UVO eServices and Precautions
UVO eServices may not operate properly with incompatible
smartphones. To view the list of compatible smartphones,
Download the UVO eServices App and install it on your smartphone.
please visit MyUVO.com
The app can be downloaded from your smartphone’s app store.
Communication between the vehicle and smartphone app may
For using UVO eServices call features such as 911 Connect,
temporarily disconnect depending on the phone state.
Roadside Assist and eServices Guide, a smartphone must be
connected with the vehicle via Bluetooth. Pair and connect your
If the feature is not operating properly, you may need to reset
smartphone with the vehicle. For information on connecting
the UVO eServices App or the smartphone and try again
your Bluetooth device, refer to the smartphone user’s manual
according to the following steps.
and instructions on the Phone Help screen on your radio. Up to
1. Try feature again in the Head Unit
five Bluetooth devices can be paired to the vehicle and only
2. Restart smartphone app
one device can be connected at a time.
3. Re-connect Bluetooth and USB cable
4. Reset smartphone
For using data communication of Vehicle Diagnostics, Parking
5. Delete Device and pair again
Minder, and My Car Zone, smartphone must be connected with
other products may result in abnormal or non-proper operation.)
Some services use the customer’s mobile phone data plan for
data communication. Therefore, the features will function in
accordance with the cellular plan.
Login and activate the UVO eServices App on your smartphone.
Use of the most up-to-date app version is recommended.
Some UVO eServices features will only be available when your
For smartphone related inquiries, please visit MyUVO.com.
smartphone is connected with the vehicle via USB and the
UVO eServices App is running.
Using UVO eServices and Precautions I 4-3
04
the vehicle via USB cable.
※ The use of genuine cable is recommended. (The use of
i Information
About UVO eServices
UVO eServices provides the following features through Bluetooth
and/or USB connection to your smartphone.
Name
Connection
Description
• 24-hour Roadside Assistance is a service plan provided by Kia Motors
America, Inc. Certain limitations apply. Coverage details are available
in the Kia Warranty and Consumer Information Manual. For access
to Enhanced Roadside Assistance, a connected mobile phone via
Bluetooth within the cellular service coverage area is required.
911
Connect
BT
If an airbag deploys, your vehicle
automatically initiates a call to 9-1-1
and sends your vehicle’s location
information to the 9-1-1 operator.
Roadside
Assist
If a diagnostic issue exists, you can
connect with a Roadside Assist.
1. The UVO eServices smartphone app must be installed and
BT & USB
2. The smartphone must be connected via Bluetooth and USB
USB
Informs you if there is a diagnostic
issue found in your vehicle. If an
issue is found, you can contact a
call center through Roadside Assist
or reserve an appointment with
your preferred Kia dealer through
Schedule Service.
USB
Keeps track of predefined triggered
alerts such as Speed Alert and
Curfew Limit Alert from the My Car
Zone feature.
Parking
Minder
USB
Saves the location of your parked
vehicle on your UVO eServices
smartphone app.
You can check where your vehicle is
parked through the UVO eServices
App on your smartphone.
eServices
Guide
BT
Receive guidance on how to use
UVO eServices.
Vehicle
Diagnostics
My Car
Zone
4-4 I UVO eServices
To use UVO eServices, the following conditions must be met.
you must log in using your MyUVO account credentials.
cable to the vehicle.
3. Once this is complete, eServices must be activated.
Connecting Bluetooth
Press the
key on the steering
Installing the UVO eServices App on your
wheel or press the
smartphone
head unit. Press
1. Download and install the UVO eSer-
Bluetooth Connection
vices App on your smartphone.
The app can be downloaded from the
Apple App Store or Google Play.
2. Register your vehicle and account at
MyUVO.com
Note: MyUVO.com is accessible from
your phone’s browser.
3. Start the UVO eServices App on your
smartphone and log in.
Pair a device from
Bluetooth-enabled phone
PHONE
SETUP
▶
key on the
Bluetooth
▶
1. Turn on the Bluetooth feature on your
smartphone’s Bluetooth settings screen.
2. Search Bluetooth devices on your
smartphone.
3. Select the Vehicle Name on the phone
that matches the name shown on the
screen.
4. Verify the passkey shown on the touchscreen.
If the phone supports SSP, check the
®
passkey on your Bluetooth device and
confirm the authentication.
04
Before using UVO
eServices
Pair a device from Bluetooth-enabled phone I 4-5
Connecting to
smartphone via USB
Activating UVO eServices
Press the
UVO
Vehicle Diagnostics
1. Connect your smartphone with the vehi-
Parking Minder
Press the
key, then press the
or
My Car Zone
Yes
button, then the UVO
eServices activation process will begin.
or
button.
cle via USB cable.
NOTICE
• For smartphone related inquiries, please visit
MyUVO.com.
NOTICE
• Before activating UVO eServices, ensure
your phone is connected to the vehicle via
USB cable.
4-6 I UVO eServices
911 Connect
Initiating a 911 Call
If an airbag deploys, the following screen
911 Connect
If an airbag deploys, your vehicle automat-
is displayed and a call is automatically
placed to 9-1-1 after 10 seconds.
ically initiates a call to 9-1-1 and sends
your vehicle’s location information to the
9-1-1 operator.
The 911 Connect feature is available only
when the mobile phone is connected via
Bluetooth.
By default, this feature is turned off. To turn
it on, you must turn it on in the eServices
Once a call is connected with a 9-1-1
Settings menu. By enabling this feature,
operator, it is possible to request emer-
you are agreeing to the 911 Connect
gency services to be dispatched to your
terms of use.
location.
A ( ) icon is displayed at the top of the
touch screen as shown below when phone
is connected to UVO eServices system via
04
Bluetooth and the 911 connect feature is
turned on.
911 Connect I 4-7
The 9-1-1 operator may request informa-
When the 9-1-1 operator attempts to talk
tion on the current location of your vehicle.
to the driver again, the call time is dis-
When the 9-1-1 operator requests your
played and allows the driver to speak with
vehicle location, “Sending Location” is
the 9-1-1 operator.
Roadside Assist
Roadside Assist
If there is any issues in the vehicle, you
displayed on the screen and the vehicle
can connect with a Roadside Assist agent.
location is automatically sent to the 9-1-1
The Roadside Assist feature can be used
operator.
only when your phone is connected via
Bluetooth.
Press the
4-8 I UVO eServices
UVO
key ▶
Roadside Assist
Vehicle Diagnostics
Press the
UVO
key ▶
Vehicle Diagnostics
Conducting Vehicle
Diagnostics
Vehicle Diagnostics is available only when
the ignition is turned on and the vehicle is
parked.
It also requires that UVO eServices is
If diagnostic issues are found, press the
Send Report button to send to your MyUVO
activated, and the Phone is connected
via USB cable before starting Vehicle
The Vehicle Diagnostics process will begin.
account or press the
Diagnostics.
When a diagnostics check is in progress,
ton to schedule an appointment with your
keep the vehicle in park with the ignition
preferred or nearby Kia dealer.
Schedule Service
but-
on. To cancel diagnostics, press the
Cancel
button on the touch screen or
04
any hardkey.
Vehicle Diagnostics I 4-9
Schedule Service
Press the
Preferred
or
Nearest
button.
Press the
When scheduling an appointment using
the Schedule Service button, pressing the
Preferred
Send Report
Send Report
in the vehicle diag-
nostics result screen.
button will allow you to request an
appointment with your preferred Kia dealer
and send your vehicle’s diagnostics information.
Pressing the
Nearest
button will allow you
to request an appointment with the nearest Kia dealer and send your vehicle’s
Request an appointment with Preferred or
diagnostics information.
Nearest Kia Dealer and send your vehicle’s diagnostics data.
Vehicle Diagnostics Data is transmitted to
your account and you can see the report
on MyUVO.com
4-10 I UVO eServices
Scheduled Diagnostics
after Vehicle Diagnostics, it is recom-
If you have set up Scheduled Diagnostics
mended that you send the diagnostic
on your UVO eServices App, a vehicle
results to your MyUVO account.
Press the Send Report button to send the
diagnostics check will automatically start
diagnostics results to your MyUVO
On the date of the Scheduled Diagnostics,
account.
the following window will be displayed.
on the day you selected.
Press the
Send Report
button to see the
Vehicle Health Report on MyUVO.com.
Press the
Yes
button on the touch screen
to proceed with diagnostics.
04
Even if diagnostic issues are not found
Vehicle Diagnostics I 4-11
My Car Zone
Press the
vehicle’s powertrain is detected, Automatic
My Car Zone is a feature that provides
Curfew Limit Alerts History
Diagnostics will be notified.
alerts and driving history for Curfew Limit
Automatic Diagnostics
UVO
key ▶
My Car Zone
If a critical diagnostics issue with your
Alerts and Speed Alerts set by the user.
Name
Description
Curfew Limit
Alert
Curfew Limit Alerts are
alerts that are triggered
when a driver is driving
within a predefined time
range.
Speed Alert
Speed Alerts are alerts
that are triggered when
a driver exceeds the
predefined maximum
speed.
My Car Zone features are supported only
when UVO eServices has been activated.
NOTICE
• The screen messages differ based on the
vehicle diagnostics severity. Ensure your
phone is connected to the system via USB
cable before using
Send Report .
4-12 I UVO eServices
Schedule Service
and
Speed Alerts History
Curfew Limit Alert
Curfew Limit Alert
Speed Alert
You can check the Curfew Limit Alert his-
You can check the Speed Alert history for
tory for a list of past triggered curfew alerts.
triggered speed limit alerts of the vehicle.
Speed Alert
Description
Phone
Name of phone connected upon triggered
curfew limit
Alert Time
Initial alert time
Duration
Total duration of driving
while curfew limit was
triggered
Driving Time
Total driving time from
turning ignition on until
turning ignition off
Name
Description
Phone
Name of phone connected upon triggered
speed limit alert
Max. Speed
Maximum vehicle speed
upon triggered speed
limit alert
Alert Time
Time from first triggered
alert until last triggered
alert
Duration
Total triggered alert time
from turning ignition on
to turning ignition off
My Car Zone I 4-13
04
Name
To check My Car Zone alert history from
Parking Minder
your smartphone, you must first send the
alert history to your MyUVO account.
Once the parking location has been sent,
you can view your vehicle’s location from
Sending Parking Location
The location where your vehicle is currently
the UVO eServices App on your smartphone.
parked can be sent to your smartphone.
Ensure that your smartphone is connected
via USB and the UVO eServices App is
running before using this feature.
After parking the vehicle, press the
UVO
key ▶ Parking Minder to send the
vehicle’s location to your smartphone.
NOTICE
• When the parking location is being sent, do
not drive the vehicle. Ensure that you have
logged into the UVO eServices App, and your
phone is connected to the multimedia system
via USB cable.
• When ignition is turned off while the phone is
connected via USB, Parking Minder can be
transferred automatically if the option is set up
in UVO eService Settings
4-14 I UVO eServices
eServices Guide
UVO eServices Settings
Refer to
SETUP
key ▶
UVO eServices
eServices Guide
eServices Guide provides guidance on
how to use UVO eServices.
This feature is only available when the
mobile phone is connected via Bluetooth.
UVO
key ▶
eServices Guide
04
Press the
eServices Guide I 4-15
MEMO
part.5
Voice Recognition
What is Voice Recognition?
Precautions Required for Successful Voice Recognition
Starting/Ending and Setting Voice Recognition
Voice Recognition Screen Overview
Voice Commands
Siri Eyes Free
Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
Precautions Required
for Successful Voice
Recognition
4. The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
head. To make your commands better
multimedia system by recognizing voice
commands and enables hands-free oper-
1. Voice recognition supports only the
understood, keep your body straight
ation of the system while you are driving
commands that are displayed on the
in the driver's seat when speaking the
your car.
screen and written in the User's Guide.
command.
Not all possible voice commands are rec-
2. To ensure the correct recognition and
5. Speaking naturally and clearly will
ognized by the system due to technological
execution of your command, say your
ensure better recognition of your voice
limitations. To make up for these limitations,
command when you hear the beep after
commands.
the system displays the voice commands
that are available for you to use.
6. In the following cases voice recognition
a voice prompt.
3. Voice recognition automatically ends if:
1) The sound of the wind if any window
There are errors in communication between
1) A call is incoming or outgoing
people. Likewise, voice recognition some-
2) A media device (USB or iPod, etc.) is
times misunderstands your voice command
3) The rear view camera is operated
either check the screen for the available
4) The car engine starts or stops
5) A system key, such as RADIO
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
or
MEDIA
key is selected
or the sun roof is open.
2) High speed blower from the air vents.
connected or disconnected
in some circumstances. If this happens,
will be affected by ambient noise.
Set climate control to blow lower than
level 3.
key
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
5-2 I Voice Recognition
Starting/Ending
and Setting Voice
Recognition
Starting Voice Recognition
Press the
key briefly (less than 0.8
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to
After pressing the
end voice recognition.
2. Press and hold (more than 0.8 seconds) the
key on the steering
wheel control to end voice recognition.
Combining Voice Recognition
with On-Screen Commands
key, say a com-
mand after the beep. The voice recognition
system will execute the desired operation
after understanding the command.
seconds) on the steering wheel control to
Alternatively, you may touch any of the
activate voice recognition.
corresponding Commands on the screen
while the Voice Recognition system is in
operation.
Combining voice recognition with available
on-screen commands is useful when the
system is taking longer than expected or
the voice command did not execute as
05
desired.
Starting/Ending and Setting Voice Recognition I 5-3
Extending the Listening Time
When the system is waiting for your command, after the voice prompt and beep
have been heard, if you press the
key (less than 0.8 seconds), then the beep
will sound again and standby mode will
restart.
When activated, voice recognition waits for
your command for 5 seconds. If you say
nothing for 5 seconds, a voice prompt will
ask for your command again.
5-4 I Voice Recognition
Skipping Prompt Messages
Adjusting Voice
Recognition Volume
When you hear the prompt message,
press the
key on the steering
During voice recognition, rotate the vol-
wheel control to skip the message and go
ume knob to adjust the message volume.
directly to listening mode to say your command.
This results in faster operation when
you feel the message is too long or you
already know the command to use.
i Information
05
• Refer to Part 8 for instructions on how to
change the Voice Recognition Settings.
Starting/Ending and Setting Voice Recognition I 5-5
Voice Recognition
Screen Overview
Start Screen
Name
Description
Representative Displays the represenCommands
tative commands.
Not available
command
Displays commands
that are not available
due to a failure in
meeting the conditions
for using them and
thus need additional
settings. The conditions
required for using them
will be described briefly
under each command.
5-6 I Voice Recognition
Name
Description
Help Display
Standby
Voice
recognition
status icons
Voice guidance
Voice command
process
Recognized
results
Displays the voice recognition result.
User's
speaking
volume being
recognized
Displays the voice
command volume in
real time.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recognition.
Name
Description
Command
list
• Shows the available
commands.
• Select or say a command
to display additional commands in detail.
How to
use for
selected
item
This section shows how to
use voice recognition for
the selected item.
How to use
in general
This section displays how
to use voice recognition in
general.
Instructions for Using
Voice Recognition
Description
Detail
instruction
This section describes
how to use voice recognition in detail.
Close
button
Closes the screen and
restarts voice recognition.
05
Name
i Information
• In the instructions screen, no voice is
recognized, so you must manually issue
commands. Because the instructions screen
displays a lot of content, you cannot view it
while driving for safety precautions.
Voice Recognition Screen Overview I 5-7
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands”
and “Local Commands”.
1. Global Commands (●): Commands that can be used immedi-
Command
●
Call
Displays downloaded Contacts, after this
you can make a call by saying the name.
●
Call 
You can directly call a person by  in
the downloaded Contacts.
●
Call 
on Mobile
You can call a person  directly to
the number that is saved as “Mobile” in the
downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●
Call 
at Work
You can call a person  directly to the
number that is saved as “Work” in the downloaded Contacts.
e.g.) Call “John Smith” at Work
●
Call 
at Home
You can call a person  directly to
the number that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
●
Call 
on Other
You can call a person  directly to the
number that is saved as “Other” than “Mobile,
Home, or Work” in the downloaded Contacts.
e.g.) Call “John Smith” on Other
●
Dial Number
Displays a screen where you can say a
phone number to dial.
●
Dial 
You can directly say the number to call.
e.g.) Dial 111 555 1234
●
Redial
Directly calls at the number that you last
dialed.
●
Call History
Displays your Call History, where you can
say the list number to make a call.
ately after activating voice recognition.
2. Local Commands (○): Commands that can be used when a
multimedia or Bluetooth function is running, or displayed on the
screen, after activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after connecting a Bluetooth device.
2. To call a person, for example “Call ” whose name
is listed in Contacts, you must first download the Contacts list.
For details on downloading contacts, see “Part 3. Bluetooth >
Chapter 3. Bluetooth Phone > 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time
to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
voice data may vary depending on the number of Contacts
downloaded on the phone.
5-8 I Voice Recognition
Operation
Radio Commands
Operation
●
Radio
Plays the most recent radio channels
from FM, AM, and SiriusXM™.
●
FM
Plays FM radio.
●
FM
<87.5~107.9>
Tunes to FM  according to
what you say.
e.g.) FM 87.5: FM eighty seven point five
●
SiriusXM
Plays SiriusXM™ radio.
●
SiriusXM
<0~999>
Tunes to SiriusXM™ Channel  according to what you say.
e.g.) SiriusXM 23: SiriusXM Twenty three
●
AM
Plays AM radio.
●
AM <530~1710>
Tunes to AM  according to
what you say.
e.g.) AM 530: AM Five thirty
○
Preset <1~40>
Tunes to your preset stations (1 to 40).
○
Channel
<0~999>
In SiriusXM™ Radio mode, turns on the
 that you say.
05
Command
Voice Commands I 5-9
Media Commands
* Check the following before you use media commands.
Command
●
Music
Continues the last media you played.
iPod
Plays the iPod currently connected. This
will work the same when an iPhone is connected. If a USB is connected, then it will
be played instead of the iPod.
●
USB
Plays the music on the USB currently connected.
If an iPod is connected, then the iPod will
be played instead of the USB.
●
Bluetooth Audio
Plays the music on the Bluetooth phone
currently connected.
This may not be supported depending on
the Bluetooth connection status.
●
AUX
Plays external devices that are currently
connected.
●
My Music
Plays My Music files stored in the system.
1. If no media is connected or if no playable files exist at the time
when you use these commands, a voice message will tell you
●
that this is not available.
2. If you say the name of the media that is currently playing again,
then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
5-10 I Voice Recognition
Operation
Command
Operation
○
Play
Plays a selected file.
Maintains the current settings during playback.
○
Pause
Pauses a file that is playing.
Maintains current settings while paused during
playback.
○
Shuffle
Plays tracks or files randomly.
Maintains current settings during shuffled
playback.
○
Shuffle Off
Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential
playback.
○
Repeat
Plays the current track or file repeatedly.
Maintains the current settings during repeat playback.
○
Repeat Off
Cancels Repeat and plays multiple tracks or files.
Maintains current settings during multiple track
playback.
2. Bluetooth audio/AUX Command
For Bluetooth audio and external devices (AUX), local commands
are unavailable, including Play, Pause, Repeat and Shuffle.
05
1. USB Music/iPod/My Music Command
Voice Commands I 5-11
UVO eServices Commands List
Command
Operation
●
Roadside Assist
Connect with a Roadside Assist agent.
●
Vehicle
Diagnostics
Informs you if diagnostic issues are found
in your vehicle
eService Guide
Provides guidance on how to use UVO
eServices
●
5-12 I Voice Recognition
Other Commands List
(Commands used in List/Help)
Command
Operation
Help
Moves to the voice recognition help screen.
All available commands can then be identified and used.
○
Line 1~4
(One~Four)
When you cannot select a certain name,
such as in Call History, you can select it
using numbers.
Simple numbers can be recognized, such
as “One” or “Two”.
○
Yes/No
When voice recognition is activated, this
command is used when an answer is
requested for a confirmation question.
○
Previous/Next
When four or more searched items are
listed, you can move to the previous or
next page using a voice command.
○
Manual Input
When Dial entry results are displayed,
this command is used to search manually,
rather than to search with a voice command.
Voice recognition stops after this command
is used.
○
Go Back
Moves to the previous screen.
●
Exit
Ends the voice recognition.
●
How to start Siri
How to use Siri
When you access the Siri screen while
pressing and holding
key on the
If you want to use Siri, you have to con-
steering wheel, you select the
nect your iOS device to the Multimedia
ton and then you can speak what you
system through Bluetooth.
want. Note that the Multimedia system
(Please check whether your iOS device
only supports “Phone” related functions.
supports Siri and turning Siri On)
Other functions will be performed in your
Then you can use Siri while pressing and
holding
key on the steering wheel.
iOS device. If you press voice key quickly,
Speak
but-
Siri would re-start. If you hold down voice
key, Siri would be terminated and the
screen would go back to the previous
screen. Eyes-Free mode would be activated automatically while you are driving.
i Information
• Functions and feedbacks from voice
commands via Siri are executed in the iOS
device. If the iOS version is changed, the
functions and response may be different
according to the iOS device and the latest
version.
When shifting gears into P or putting the
Parking brake on, Eyes-Free mode would
be deactivated automatically.
05
Siri Eyes Free
Siri Eyes Free I 5-13
MEMO
part.6
Apps/Info
SiriusXM™ Data
Apps/Info
SiriusXM™ Data
Accessing SiriusXM™ Data
Select the
About SiriusXM™ Data Service
The SiriusXM™ Data Service is a paid membership satellite radio
service that provides users with information such as Weather,
Sports, Stocks, Fuel Prices and Movies.
However, weather information is not supported for vehicles purchased in Canada.
6-2 I Apps/Info
APPS/
SiriusXM Data
icon after selecting All Menus or the
key to enter the SiriusXM™ Data mode.
SiriusXM™ Weather
Announcement
Weather Forecast
Warnings and Advisories
This service provides current weather
This service provides weather warnings
At the “SiriusXM Data” screen, select
information and weather forecasts for the
and advisories, such as tornado, storm,
the
next five days in your region. To change
flood, etc.
icon to enter the Weather
Announcement mode.
the region, select the
Other City
button and
select the desired region.
06
Weather
SiriusXM™ Data I 6-3
SiriusXM™ Sports Information
My Teams
You can always check the list of teams
You can save teams which you are inter-
that you added in the “My Teams” menu.
Sports mode.
ested in as part of My teams to easily view
Select the
This service provides real-time updated
related scores and schedules.
the team name to delete the team from
information on scores and schedules for
Select the My Teams menu and then
“My Teams” or select the
major sports, such as NFL, NBA, NCAA
select the
add other teams.
football, NCAA basketball, NHL, MLB,
register your favorite teams.
NASCAR and more.
Search for your favorite teams and select
Select the
Sports
icon to enter the
the
Add
button on the right to add it to the
“My Teams” list.
6-4 I Apps/Info
button to search for and
button on the right side of
Add
button to
Select the team name to check daily
SiriusXM™ Stock Information
results and recent schedules for that team.
In the “SiriusXM Data” screen, select the
Stocks
icon to enter the Stocks mode.
Stocks is a feature that shows the current
value and change of stocks.
For symbols which you are interested in,
select the icon to save the symbol as a
part of the “Saved” symbols which can be
viewed from the “My Favorites” button on
06
the Stocks Main screen.
SiriusXM™ Data I 6-5
My Favorites
Stock Search
In the My Favorites screen, you can find
My Favorites shows a list of stocks added
Use the Stock Search menu to search for
the selected stock information that you
by the user. When entering the Stocks
specific stocks.
registered.
menu for the first time, a screen is dis-
Select the
played for you to add your favorite stock
your favorite stocks to save them in “My
information. Select the
Favorites”.
Add
button to
move to the stock search screen.
6-6 I Apps/Info
button after searching for
At the “SiriusXM Data” screen, select the
Fuel Prices
icon to enter the Fuel Prices
Information mode.
Search for Nearby Stations, and
Register Key Locations as Favorite
Stations.
Select the
Search for nearby stations with the “Nearby
the “Favorite Stations” menu.
button to the right of the list
to register key locations as a Favorite
Station so that you can go there again with
Stations” menu.
It shows station locations, starting from the
nearest one, and select “Nearest” menu
on the top right side to further sort them
by price or brand name.
06
SiriusXM™ Fuel Price
Information
SiriusXM™ Data I 6-7
My Fuel Type Settings
SiriusXM™ Movie Information
icon to enter the
types and favorite brands.
Movie mode.
Search for Nearby Theaters, and
Register Any Key Locations as Favorite
Theaters.
When searching for Nearby Stations, the
You can check recent movies and nearby
In the “Nearby Theaters” menu, you can
results will reflect selected fuel types and
theaters, and also register your favorite
search for any nearby theaters.
brand information.
theater locations.
It shows theaters, starting from the nearest
With the “Filters” menu, you can select fuel
Select the
Movies
one, and selecting the “Nearest” menu at
the top right side will sort them by name.
6-8 I Apps/Info
Select the
button to the right of the list
In the “Top Movies” menu, you can check
to register your favorite theater so that you
for any movies that are currently popular.
Select the
button to the right of a
can always check it again using the
“Favorite Theaters” menu and selecting
the
button to view the current movie
movie title to view the plot summary and
any other detailed information.
06
information for that theater.
SiriusXM™ Data I 6-9
MEMO
part.7
Other Features
Climate Mode
Camera
Other Features
Climate Mode
Name
Set the temperature
of the driver's seat
and passenger
seats
Displays the configured temperature settings for the driver's seat and the passenger
seats. Cooling or heating will continue until
the temperature matches the configured
temperature settings.
The internal temperaure can be controlled in incrments of 1°F within a range
of 63°F to 89°F.
LOW is displayed when the temperature
is set to anything below 63°F, and HIGH
is displayed when it is set to anything
above 89°F.
Air direction
Displays the configured air direction settings.
Air volume
Displays the configured air volume settings
Cooling/heating
control status
(AUTO)
Displayed when the AUTO key is pressed
and cooling/heating operates automatically
according to the configured temperature
settings.
AUTO will be turned off when you try to
do the following with AUTO on:
- Control the air volume
- Control the air direction
- Turn the air conditioning (A/C) on/off
- Turn on the moisture removal function
for the windshield
Air conditioning
control status
Displayed when the A/C key is pressed
and the air conditioning starts cooling/heating.
Operating Climate Mode
Press the
CLIMATE
key for the climate system to see status infor-
mation in the full screen display.
While multimedia or navigation is in use, the climate system information will be displayed over top when you control the temperature (TEMP) or turn on the air conditioner (A/C).
Basic Mode Screen
7-2 I Other Features
Description
Simultaneous temperature settings for
the driver's seat and
the passenger seats
(SYNC)
Description
Displayed when the SYNC key is pressed
and the temperatures of the driver's seat
and the passenger seats can be configured at the same time.
07
Name
Climate Mode I 7-3
Camera
Steering-linked camera
• This device is connected to a rear
WARNING
- Backing Up & Using Camera
• Never rely solely on the rear view camera
when backing up. Prior to entering your
vehicle always do a visual check of the area
behind your vehicle, and before backing up be
aware of your surroundings and supplement
the rear view camera by looking over your
shoulders and checking your rear view mirrors. Due to the difficulty of ensuring that the
area behind you remains clear, always back
up slowly and stop immediately if you even
suspect that a person, and especially a child,
might be behind you.
i Information
• A separate chipset is used for the camera
screen while booting up, so it may be different
after booting up.
7-4 I Other Features
detection camera to see behind the car
for safe reversing.
• The Rear View Camera turns on automatically if you shift the gear to R when
the power is on or the engine has
started.
• While the device boots up, shift the gear to
"R" to activate the rear detection cameras.
Name
Red Line
About 0.5 m from the
rear bumper
Yellow Line 1
About 1 m from the
rear bumper
Yellow Line 2
About 3 m from the
rear bumper
Yellow Line 3
Trajectory of the wheel
on the driver’s side
Yellow Line 4
Trajectory of the wheel
on the passenger side
Blue Line
Neutral steering trajectory
Shift the gear to another position to deactivate the rear detection camera.
NOTICE
• A wide-angle lens is installed as the rear
detection camera to get a wider view, so
there may be some difference between the
actual distance and the distance that appears.
on-screen. For safety, make sure to view
the back, right, and left sides of the car for
yourself.
• The color of the parking guidelines displayed
in the picture may differ from the actual
screen.
• When booted up, blinking may occur when
you switch to a UI screen.
Description
As you reverse your car and monitor the
area behind your car, the steering-linked
driving trajectory and the neutral driving
trajectory are both displayed.
part.8
Setup
Setup
Sound Settings
Display Settings
Bluetooth Settings
UVO eServices Settings
Home Screen Settings
Wi-Fi Settings
Clock Settings
Voice Recognition Settings
Language Settings
Keyboard Settings
Screen Saver Settings
System Info
Setup
Setup
Setup is the screen to control Audio system settings.
To enter the screen, press the
key or the
Setup
SETUP
icon in All Menus.
Features
8-2 I Setup
Description
Sound
Provides the sound control options for Position,
Bass, Mid, Treble, Volume
and Advanced settings.
Display
Provides the Mode/
Illumination settings.
Bluetooth
Provides the Bluetooth
Connection/Auto
Connection Priority/
Bluetooth System
Information settings.
UVO
eServices
Provides the 911
Connect/Parking Minder/
My Car Zone/Scheduled
Diagnostics/Trip Info
Sync Reminder Settings.
Phone
projection
For more details, refer to
Phone projection guide.
Home
Screen
Provides the function
to customize the three
menu items at the bottom
of the Home Screen.
Features
Description
Wi-Fi
Provides the Wi-Fi
On and Network
Connection settings.
Clock
Provides the Time and
View settings.
Voice
Recognition
Provides the Guidance
and Priority settings.
Language
Provides the Change
Language settings.
Keyboard
Provides settings to
switch keyboard layouts.
Screen
Saver
Provides the Clock/
None settings.
System Info
Provides software and
storage space information.
Display Off
Provides the Display Off
(touch activation) function.
Sound Settings
Features
Advanced
Select additional audio
options such as “Speed
Dependent Volume
Control” that automatically
controls Audio volume
according to vehicle speed
as well as “Variable EQ”.
Default
Resets the sound to factory default settings.
Beep
Select to activate a beep
when pressing buttons.
Adjusts the sound effects for the whole
system.
Description
Display Settings
Adjusts the level of illumination for the
entire system.
i Information
Description
Position
Select the Up/Down/Left/
Right button to control
sound positioning.
Select Center to concentrate the sound on the
center of vehicle.
Tone
Drag the slide bar to
control bass/mid/treble
settings.
Select Center to initialize
the settings.
Features
Description
Mode
Select any of LCD illumination change modes:
Automatic (changes
the level automatically),
Daylight, and Night.
Illumination
Set the levels of illumination for day and night.
Select Default to initialize
the settings.
Default
Resets the display to factory default settings
Display Off
Provides the Display Off
(touch activation) function.
Setup I 8-3
08
Features
• Advanced sound settings may differ according
to selected AMP option.
• The seat shape may differ according to
vehicle model.
Bluetooth Settings
Bluetooth Connection Settings
Press the
Changes Bluetooth phone settings.
▶ Select
SETUP
key ▶ Select
Bluetooth Connection .
Features
Paired Device
List
Displays the paired
Bluetooth device list.
When selecting from
the list, the device is
connected or disconnected.
Bluetooth
Audio
Connection
Status
An icon appears when
you make a Bluetooth
Audio connection.
Bluetooth
Hands-Free
Connection
Status
An icon appears when
you make a Bluetooth
Hands-free connection.
Add New
Register a new
Bluetooth device.
Delete Devices
Select and delete a
paired device.
Help
Switches to the
Bluetooth Connection
Help screen.
Bluetooth
Bluetooth Settings
Press the
icon.
8-4 I Setup
SETUP
key ▶ Select
Bluetooth
Description
Auto Connection Priority
Press the
▶ Select
SETUP
key ▶ Select
Auto Connection Priority
Bluetooth
When the engine is running, the selected
Bluetooth device is automatically connected. If you fail to connect the selected
Bluetooth System Information
Press the
▶ Select
SETUP
Bluetooth
Features
Description
Vehicle
Name
You can change the
Bluetooth device name of
the vehicle.
Passkey
You can change the passkey used for Bluetooth
device authentication. the
initial passkey is 0000.
device, the previously-connected device is
automatically connected, and if it also fails,
then it tries to connect all paired devices
key ▶ Select
Bluetooth System Info
sequentially.
Depending on auto connection priority,
connection to a device may take time.
i Information
• The vehicle name above is an example.
Check the actual information on the product.
Setup I 8-5
08
i Information
• Up to 5 Bluetooth devices can be paired.
• Only one Bluetooth device can be connected
at a time.
• During a Bluetooth device connection, another
device cannot be paired.
• When you delete a paired device, the Call
History and Contacts stored in the head unit
are also deleted.
• Bluetooth Hands-free and Bluetooth Audio
functions are supported.
• Hands-free and audio-supported devices,
such as a Bluetooth smartphone or audio, will
function normally.
• When a Bluetooth device is connected, if
the Bluetooth connection is unexpectedly
disconnected, due to being out of
communication range, the device powering
off, or a Bluetooth communication error, the
Bluetooth device automatically searches for
and connects to nearby Bluetooth devices.
• If the system is not stable, due to a vehicleBluetooth device communication error, restore
the Default Factory Settings.
• For Default Factory Settings, the bluetooth
settings are reset to factory settings.
• Press the SETUP key ▶ Select Bluetooth
▶ Select Default Factory Settings .
Default Factory Settings
UVO eServices Settings
You can delete all paired devices and
This feature is used to turn on or off the
restore the Default Bluetooth Settings. For
Within the eServices Settings screen,
Default Factory Settings, all paired devices
UVO eServices related features can be set,
are deleted, and the system is reset to
such as activating 911 Connect, Parking
factory settings.
Minder and setting the My Car Zone.
For safety reasons, My Car Zone Settings
cannot be adjusted while driving. Park
the vehicle before making any changes to
your settings.
Press the
8-6 I Setup
911 Connect
SETUP
key ▶
UVO eServices
911 Connect feature.
When enabing this feature, you must first
Parking Minder
My Car Zone
agree to the 911 Connect tems of use.
If you want to send vehicle location to your
This feature is used to set My Car Zone
After reading the tems of use, press the
Agree
button on the touch screen to
smartphone automatically when you turn
(Curfew Limit, Speed) alert conditions.
accept.
feature On.
the ignition off, turn the Parking Minder
My Car Zone Settings is unavailable when
UVO eServices has not been activated.
Press the
My Car Zone
SETUP
key ▶
UVO eServices
▶
The PIN must be entered to use My Car
08
Zone Settings.
Setup I 8-7
This screen is used to set Curfew Limit
Curfew Limit Alert Settings
PIN
and Speed Alert features.
Within Curfew Limit Alert Settings, you can
This feature is used to change the PIN to
set the Curfew Limit Alert Start and End
enter My Car Zone Settings.
Set the alert conditions On ▶
Settings
Time. You can also set the Alert Interval of
alerts upon Curfew Limit.
NOTICE
Speed Alert Settings
Within Speed Alert Settings, you can set
the vehicle speed limit and Alert Interval of
alerts upon overspeeding.
8-8 I Setup
• B e fo r e p r e s s i n g Done , e n s u r e yo u r
smartphone is connected to UVO eServices
system via USB cable.
Done
button to transmit the new
PIN to your My UVO com account.
Restore Factory Settings
Scheduled Diagnostics
This feature is used to restore all My Car
This feature is for setting when scheduled
Zone alert history and settings back to
diagnostics alerts display.
default state.
Press
SETUP
key ▶
UVO eServices
the Scheduled Diagnostics On ▶
▶ Set
Settings
NOTICE
• For months without the corresponding day,
the last day of the month will automatically be
set as the scheduled diagnostics date.
08
Press the
Setup I 8-9
Home Screen Settings
Wi-Fi Settings
system displays alert when trip info(Driv-
You can customize the three menu items
You can share a digital-device network
ing Distance, Driving Speed, Driving Time,
at the bottom right of the Home Screen
with the vehicle device through Wi-Fi.
etc). reaches 90% of memory.
into the ones you want.
UVO eServices must be activated to use
On the Home Screen Settings screen,
this feature.
drag the menu items on the right to the
Trip Info Sync Reminder
Trip Info is a feature used to set whether
area marked in red in the screen below.
Press
SETUP
key ▶
UVO eServices
▶
Set Trip Info Sync Reminder On
Features
i Information
• You can select the Default button to reset
to the factory default settings.
8-10 I Setup
Description
Wi-Fi
Turn on/off Wi-Fi.
MAC
Address
Displays the MAC address.
Refresh
Searches available networks near the vehicle.
Network
Name
Displays available network
AP (Access Point) names.
Add Wi-Fi
Network
Enter the network ID/
password to connect to
a hidden network AP
(Access Point).
Help
Shows the Wi-Fi setup
guide.
How to Connect to a Network
Clock Settings
Voice Recognition
Settings
1. In the Wi-Fi settings of a digital device,
activate Internet sharing (Hotspot).
Configure the settings for time and date.
2. In the vehicle network list, select the
Using the arrow buttons, you can change
Configure how to make a call with
desired device to connect to. Enter
the values. Clock settings do not automat-
Voice Recognition Guidance and Voice
the password to connect, if any.
ically change when crossing into different
Recognition.
time zones. The time must be changed
manually on this screen.
Features
Beginner
Normal
For normal users, the
voice recognition system
provides simple and short
voice guidances.
Description
Daylight
Saving Time
The daylight saving
time (DST) is applied.
24 Hours
The time display is set
in 24-hour format.
Direct entry
If you tap any value,
you can directly enter
the number in the following screen.
08
Features
Description
For beginners, the voice
recognition system provides voice prompts.
Setup I 8-11
Language Settings
Keyboard Settings
Screen Saver Settings
You can configure the displayed system
You can configure the keyboard layout for
You can select any of the following screen
language.
each language.
formats to be displayed when the screen
or power is turned off (Press and hold the
Power button).
• Digital clock and date
• Analog clock and date
• None
When the language is changed, the sys-
You can configure ABCD or QWERTY
tem language is automatically changed.
keyboards for the system.
Unique data including MP3 file name is
not changed and voice recognition does
not support some languages.
8-12 I Setup
i Information
• Configured keyboard layouts are applied
to all input modes.
System Info
System Update
At the System Info screen, insert the USB
At the System Info screen, software ver-
memory with the latest file downloaded,
sion information, updates, and storage
and then select the
status details are available.
updating. The system will then reboot
Update
button to begin
automatically.
i Information
• This product needs supplemented software
updates and additional functions, which
collectively may take some time to complete,
depending on the amount of data.
Description
SW Info
System version information and update details
are available.
Select the Update button
to update the system.
After update is complete,
the system will reboot
automatically.
Storage
Displays the memory
space available for media
storage.
CAUTION
• If the power is disconnected or the USB is
removed during an update, the data might be
damaged. Please do not turn off the vehicle
while an update is in progress.
08
Features
Setup I 8-13
MEMO
part.9
Appendix
Product Specification
Troubleshooting
FAQ
Appendix
Product Specification
Common
Name
Car TFT LCD Display Audio Unit
Power Supply
DC 14.4 V
Operating
Power
DC 9 V ~ DC 16 V
TFT-LCD
Screen Size
7 inch(152.4 X 91.44 mm)
Resolution
384000 pixels (Resolution: 800 x 480)
Operating
Method
Current
Consumption
2.5 A
TFT(Thin Film Transistor) Active Matrix
Sleep
Current
1 mA
(Head Unit Only)
Viewing Angle
Left/Right, Top/Bottom: ALL 89°
Operating
Temperature
-20 ~ +70 °C
(-4 ~ +158 °F)
Storage
Temperature
-30 ~ +80 °C
(-22 ~ +176 °F)
Internal Lighting
LED
Dimensions
178 X 140.2 X 60 mm (Main BOX)
Weight
1.940 kg
Radio
Channels
FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz)
AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)
Sensitivity
FM: Under 10 dBu/AM: Under 35 dBu
Distortion Factor
Within 2 %
9-2 I Appendix
Bluetooth® Wireless Technology
Wi-Fi Details
Frequency
2412 ~ 2462 MHz,
5180 ~ 5825 MHz
Specification
IEEE802.11 a/b/g/n/ac
Operating
Temperature
Supported
Bandwidth
Supported
Bluetooth®
Specification
Frequency
Range
2402 ~ 2480 MHz
-20 ~ +70 °C (-4 ~ +158 °F)
Supported
Profile
Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)
20/40/80 MHz
Output
-6~4 dBm (Power Class2, Conducted)
Number of
Channels
79 channels
3.0
CAUTION
09
• The producer and installer cannot provide services related to life safety
as the concerned radio equipment is liable to radio interference.
Appendix I 9-3
Troubleshooting
1. Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual device.
Problem
Possible Cause
Sound does not work in
AUX mode
• Are the audio connector jacks fully
inserted into the AUX terminal?
The external device is
not working
• Is the external device connected with a
standard connector cable?
Upon turning power on,
the most recent mode
screen is not displayed
Within modes that play files by reading
external sources, such as USB, iPod, or
®
Bluetooth streaming mode, the most
recently played mode screen prior to turning off power may not properly load
• If the corresponding device is not connected, the mode operated prior to the
most recent mode will operate
• If the previous mode still cannot be
properly played, the mode operated
prior to that will operate
2. If you are having problems with the device, try the suggestions
listed below.
3. If the problems persist, contact your Kia dealer.
Problem
Possible Cause
There are small red,
blue, or green dots on
the screen
• Because the LCD is manufactured with
technology requiring high point density,
a pixel or lighting deficiency may occur
within 0.01% of total pixels
The sound or image is
not working
• Has the Switch for the vehicle been
turned to [ACC] or [ON]?
• Has the SYSTEM been turned OFF?
The screen is being
displayed but sound is
not working
• Has the volume been set to a low level?
• Has the volume been muted?
When the power is
turned on, the corners
of the screen are dark
• The display appearing somewhat dark
after prolonged periods of use is normal
with LCD panels. It is not a malfunction
• If the screen is very dark, contact your
nearest Kia dealer for assistance
Sound is working from
only one speaker
• Are the positions of Fader or Balance
sound controls adjusted to only one
side?
9-4 I Appendix
The power
does not
turn on
The system
does not
play
Possible Cause
Countermeasure
Problem
Possible Cause
Countermeasure
The fuse is disconnected
• Replace with a suitable fuse
• If the fuse is disconnected
again, please contact your
point of purchase or Kia
dealer
The image
color/tone
quality is
low
• The brightness,
saturation, hue,
and contrast levels
are not set properly
• Properly adjust the brightness, saturation, hue, and
contrast levels through
Display Setup
Device is not properly
connected
The vehicle battery is
low
• Charge the battery If the
problem persists, contact
your point of purchase or
Kia dealer
• The volume level
is set to the lowest
level
• The connection is
not proper
• Adjust the volume level
• Check to see that the
device has been properly
connected
Sound does
not work
The sound
or image
quality is
low
• The device is
currently fast-forwarding, rewinding,
scanning, or playing in slow mode
• Vibration is occurring from where
the conversion
switch has been
installed
• Image color/tone
quality is low
• Check to see that the
device has been properly
connected
• The sound will not work
when the device is fast-forwarding, rewinding, scanning, or playing in slow
mode
• The sound may be
short-circuited and the
image distorted if the
device vibrates
• The device will return to
normal once vibrations stop
09
Problem
Appendix I 9-5
Problem
The USB
does not
work
9-6 I Appendix
Possible Cause
Countermeasure
• USB memory is
damaged
• Please use the USB after
formatting it.
• USB memory has
been contaminated
• Remove any foreign substances on the contact
surface of the USB memory
and multimedia terminal
• A separately purchased USB HUB
is being used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB extension
cable is being
used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB which is
not a Metal Cover
Type USB Memory
is being used
• Use standard USB
Memory
• An HDD type, CF,
SD Memory is
being used
• Use standard USB
Memory
• There are no
music files which
can be played
• Only MP3, WMA file
formats are supported.
Please use only the supported music file formats
Problem
The iPod is
not recognized even
though it
has been
connected
Bluetooth
does not
work or
its limited
functions are
available
Possible Cause
Countermeasure
• There are no titles
which can be
played
• Use iTunes to download
and save MP3 files into the
iPod
• The iPod firmware
version has not
been properly
updated
• Use iTunes to update
the firmware version and
reconnect the iPod with the
device
• The iPod device
does not recognize downloads
• Reset the iPod and reconnect with the device
• Bluetooth on your
mobile phone is
set to OFF
• Set it to ON
• The Bluetooth
connection is not
made
• Make the connection
active
i Information
• While operating the device, if an abnormality occurs that cannot be
corrected with the above described measures, press the RESET key to
reset the system.
• Press and hold the RESET key (more than 1 second). The device power
will turn off and the system will reset.
FAQ
About Pairing Mobile Phones
Q What is a Passkey?
Q I cannot pair my mobile phone. What is the cause?
®
A Check to see that the mobile phone supports Bluetooth func-
A A passkey is the password used to authenticate the connection
tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set
between the head unit and mobile phone. The passkey only
it to ON. If the cell phone still can’t be registered, try again after
needs to be entered once when pairing the mobile phone for
turning Bluetooth off and on, or delete the device registration on
the first time.
the multimedia system and cell phone and then register the cell
The initial passkey is 0000. You can change it with SETUP
Bluetooth ▶ Bluetooth System Info ▶ Passkey menu options.
phone again.
▶
Q What is the difference between pairing a mobile phone and connecting a mobile phone?
A Pairing occurs through authenticating the head unit and mobile
phone. Mobile phones paired to the head unit can be connected
and disconnected until the paired mobile phone is deleted from
®
the system. Bluetooth Handsfree features, such as making/
answering calls or managing contacts, are supported only in
09
mobile phones connected with the head unit.
Appendix I 9-7
About Making/Answering Phone Calls
About Bluetooth ® Wireless Technology/
Head Unit Use Environment
Q How can I answer a call?
A When there is an incoming call, a notification pop-up will
become displayed. To answer the incoming call, select the
Accept
button on the screen or the
A The wireless connection can be used within 15 yards.
key on the steer-
ing wheel control.
Q How many mobile phones can be paired?
To reject the call, select the
press the
Q What is the range of my wireless connection?
Reject
button on the screen or
A It is possible to pair up to five mobile phones.
key on the steering wheel control.
Q Why is call quality sometimes poor?
Q What should I do if I am talking on the Handsfree but want to
switch the call to the mobile phone?
A Check the reception sensitivity of the mobile phone when call
quality becomes worsened. The call quality may deteriorate when
A While on a call, press and hold (more than 0.8 seconds)
the signal strength is low. Call quality may also worsen if metal
key on the steering wheel control or select the
objects, such as beverage cans, are placed near the mobile
button at the bottom of the Phone screen to switch
phone. Check to see if there are metal objects in the vicinity of
the
Use Private
the call to your mobile phone.
the mobile phone. The call sound and quality may differ depending on the type of mobile phone.
9-8 I Appendix
Important Information
Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's
Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.
Keep User's Guide in Vehicle
When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please
make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and
safety information carefully.
Warning
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other
serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a
safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may
09
to distract your attention away from the road and remove your hands from the wheel.
General Operation
Voice Command Control
Functions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows
you to operate the system without removing your hands from the wheel.
Prolonged Views of Screen
Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before
attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous
if your attention has been diverted away from your driving task at a critical time.
Volume Setting
Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while
driving. Driving while unable to hear these sounds could cause an accident.
Use of Speech Recognition Functions
Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any
speech recognition functions included in the system and address any errors.
FCC Warning
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
operate this equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is
maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
06
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : FEEL-6
Create Date                     : 2016:11:16 21:33:51+09:00
Modify Date                     : 2017:06:05 17:46:30-07:00
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:06:05 17:46:30-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Creator                         : FEEL-6
Document ID                     : uuid:98fa65e2-dfe1-45f4-880b-3aa55eb57cf1
Instance ID                     : uuid:3b6fbd0f-6b0a-4f9b-91dd-05503921f05e
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Page Count                      : 130

EXIF Metadata provided by EXIF.tools