HYUNDAI MOBIS AVN-700MDA CAR AVN User Manual AVN 215TDL ATT C E G H I J

HYUNDAI MOBIS CO., LTD. CAR AVN AVN 215TDL ATT C E G H I J

Contents

user manual 2 of 2

3-50 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM7.Press the Done button to complete.Deleting favorite place1. Press the SETUP key.2.Press the My places button.3.Press the Favorite Places button.4. Select the desired favorite place button to delete. 5.Press the Delete button.6.Press the Yes button.
NAVIGATION SYSTEM 3-51NAVIGATION SYSTEMSystem information and update1.Press the SETUP key.2. Press the main button. 3. Press the System Info button. Voice guidance volume setting1.Press the SETUP key.2.Press the Voice Setup button.Voice guidance volume control● Set the desired volume level by using the ◀ or ▶ buttons and press the Listen button to verify the volume level. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Voice Guidance Louder" "Voice Guidance Softer" ● Press the Mute button when voice guid-ance is unnecessary. Voice guidance can be turned back on by pressing the ◀ or ▶ buttons or press-ing the Mute button. Voice Command1. Press the key on the steering Wheel remote controller.2. After the beep sound, say a command. "Voice Guidance On" "Voice Guidance Of"
3-52 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMAdaptive volume control ON/OFF● Press the desired setting button. INFORMATIONAdaptive Volume ControlIf the speed of the vehicle is over approxi-mately 60 mi/h (100km/h), the volume level can be increased one level higher than the current level. If the speed of the vehicle falls under 60 mi/h (100km/h), the volume level will return to its original level.Traffic Setup1. Press the SETUP key.2.Press the Traffic Setup button.3. Select the desired changes and press the Done button. INFORMATION●  Display Traffic and Flow data on Map : select whether to display traffic information on the map. ●  Voice Prompt for traffic and flow warning : select whether to provide voice guidance in front of Traffic Information. (On route - 3mile)● Display Detour pop-up message : select whether to display Detour pop up in front of Traffic Information. (On route - 3mile)Traffic Information(a) Viewing Traffic Information1. When the Traffic option is active, press the button on the Map screen.Traffic Flow INFORMATION Normal, Free Flowing (46 mph ~) Moderate Congestion (26 ~ 45 mph) Heavy Traffic, Stop and Go (0 ~ 25 mph) Road Construction Accident Congestion/Slow Traffic Incient Hazardous Road Conditions Travel Information
NAVIGATION SYSTEM 3-53NAVIGATION SYSTEMINFORMATION●  Traffic information will be shown on the map up until the scale is ~4mile.● Displays the traffic information around vehi-cle for up to a radius of 50 miles. (Information exceeding 50 miles will not be displayed)● The above list can be sorted by either Distance (Default) or Category.2.Select the desired List button. 3. The user can check points of accidents and traffic details.(b) Changing Traffic Category1.Press the Advanced button at No. 2.2. After selecting the desired menu among the six menus, press the Done button to save. Once returning to the previous List screen, the corresponding Category list will be shown and maintained until Category information is changed.
3-54 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMHelp1.Press the SETUP key.2.Press the Help button.3.Press the Navigation button.4.Press the desired Help menu button.5. The full content of the help section can be viewed by using the top-down scroll but-tons.
XM DATAXM DATA 4-1PART 4XM DATAXM Data mode ……………………… 4-2Entering XM Data mode ……………… 4-2XM Data mode screen and functions … 4-2Traffic data Service Information …… 4-2Stock Data Service Information ……… 4-3Sport Data Service Information ……… 4-3Weather data Service Information…… 4-4
4-2 XM DATAPART 4 XM DATAXM Data modeThe XM Data Service is a paid membership satellite radio service which provides users with traffic, stock, sports, and weather infor-mation. However, weather information is not supported for vehicles purchased in Canada. For information on registration or related con-tent, please visit the XM radio website (www.xmradio.com).Entering XM Data mode1. From the current location map screen with-in the navigation, press the XM DATA button.2. The main XM data service screen will be dis-played. Within the main screen, there are four categories of Traffic, Stocks, Sports and Weather.XM Data mode screen and functionsTraffic data Service Information• Automatic route recalculation (guidance) according to changes in traffic conditions.• Provides short-cuts for initially searched routes.• Displays increased detour distance and esti-mated driving times.• Displays icons by each traffic situation on the map.1. Route calculation by incorporating actual road traffic conditions● Incorporation of traffic information to route calculations is a user option which can be turned on or off by the user.2. Displays Road Traffic situations● RTM (Road Traffic Message) is a feature which displays symbols of icons for each type of road traffic condition, such as loca-tions under construction, accidents, basic weather, and others on map locations based on Traffic information provided by XM.
XM DATAXM DATA 4-33. Avoidance of locations where traffic situa-tions have occurred.● If a traffic situation occurs somewhere along the route, the route is recalculated to avoid such locations and an avoidance recalcula-tion popup will be displayed.4. Displays Traffic Event List● A list providing details on accidents and an icon which will display the accident location are displayed. The user can view details by pressing on the list or move the map to the accident location by pressing on the acci-dent icons.Stock Data Service InformationXM Stock data Service is a service which pro-vides real-time updated information on the NYSE, NASDAQ, and AMEX (approximately 11,000 symbols).1. Press the Stocks button to display the Search screen where symbols can be searched. Input the name of the symbol you wish to search and press the List button to show search results.2. For symbols which you are interested in, press the <Favorites> icon to save the sym-bol as a part of <My Favorite>. Saved sym-bols can be viewed from the My Favorites button on the Stock Main screen.Sport Data Service InformationThis service provides real-time updated infor-mation on scores and schedules for major sports, such as NFL, NBA, NCAA Football, NCAA Basketball, NHL, MLB, NASCAR and more.1. Press the desired Sports button to view related sports information.
4-4 XM DATAPART 4 XM DATA2.My teamsYou can save teams which you are interested in as part of <My teams> to easily view related scores and schedules. Within the <My teams> screen, teams can be added by pressing the Add button or deleted by pressing the button. Weather data Service InformationThe Weather Service is a service which pro-vides weather information updated every 5 minutes for your region.The Weather Service includes Tabular Weather, Graphical Weather, Warnings and Advisories Services.1. Tabular Weather Service● Provides current weather information and weather information for the coming next three days for your region.To change the region, press the Other City button and select the desired region.2. Graphical Weather Service (Map button)● This service provides weather information, such as Cloud, Fog, Rain, Snow, and Road Conditions on the Navigation map as sym-bols. Details can be viewed on specific regions by using the zoom in and zoom out features.3.Warning and Advisories Service● This service provides weather warnings and advisories, such as Tornado, Storm, Flood etc. as symbols on the Navigation map. Details can be viewed on specific regions by using the zoom in and zoom out features.
VOICE COMMAND SYSTEM 5-1VOICE COMMAND SYSTEMPART 5VOICE COMMAND SYSTEM Operating voice command ………… 5-2Condition for voice command system …… 5-2Basic operation for voice command control ……………………… 5-2Voice command Help …………………… 5-3Setting up the voice command system 5-4Setting voice Prompt ON/OFF ………… 5-4Speaker adaptation …………………… 5-4Voice command list ………………… 5-6Command list of Audio system ………… 5-6FM/AM Radio ………………………… 5-6XM Radio …………………………… 5-7CD …………………………………… 5-8MP3 …………………………………… 5-9USB MP3 ……………………………… 5-10USB IMAGE …………………………… 5-10iPod …………………………………… 5-11Others ………………………………… 5-11Command list of Navigation system ……… 5-12Map …………………………………… 5-12Destination …………………………… 5-14Route ………………………………… 5-15Others ………………………………… 5-16Searching destination by voice command ………………………… 5-19Find address ………………………… 5-19Find nearest POI ……………………… 5-20Find nearest <POI name> …………… 5-21Destination POI by phone number … 5-22Find emergency <Category> ……… 5-23Destination by address book ………… 5-24Previous destination ………………… 5-24Previous start point ………………… 5-25Go home ……………………………… 5-25Destination by memory point <1 to 5> ……………………… 5-25
5-2 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMOperating voice command Condition for voice command systemMost of the functions within the Audio and Navigation system can be operated by voice. Please follow the following instructions for optimal voice recognition performance. ● Close all windows and the sunroof. The per-formance of the voice recognition can be improved if the environment of the car inte-rior is quiet. ● Press the voice recognition button and say the desired voice command after the sound of the beep.● The microphone is positioned above the driver so that voice commands can be spo-ken while maintaining a proper posture.● Pronounce the voice commands naturally and clearly as if in a normal conversation. Basic operation for voice command control1. Press the key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment. INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the desired voice command (ex : previ-ous destination)[Voice command list], page 5-6. [Searching destination by voice com-mand], page 5-19.If the exact command is not known, use the "Help" command to view the commands list in detail. INFORMATIONPress the key shortly to input a voice command from among the system voice com-ments. The system voice instruction comment will immediately terminate. When the icon changes into the icon with a beep sound, input the desired voice command.
VOICE COMMAND SYSTEM 5-3VOICE COMMAND SYSTEM3. The inputted command is fed back to the screen and voice system. If the command was not recognized properly, say "Back". INFORMATION● The commands which can currently be inputted are displayed on the screen in yel-low.● To terminate the voice recognition system, either say "cancel" or press the for over 0.8 second. ● Be aware that during the operation of the voice recognition system, pressing the hard keys or the screen will terminate the voice recognition system. Voice command Help1. Press the key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment.INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Help". If the proper Help menu is already known, voice commands, such as "destination help" can be inputted directly. INFORMATIONThe "help" command can be used even while voice recognition dialogue is operating. At such time, help instructions appropriate to the state of the dialogue will be provided. 3. Say the name of the desired menu. (ex : "Destination help")4. Say the desired voice command.
5-4 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMSetting up the voice command system Setting voice Prompt ON/OFF● Voice prompt ON : all system prompts are provided. ● Voice prompt OFF : most of the system prompts are not provided. 1. Press the key on the steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." The "voice prompt on" or "voice prompt off" can be directly inputted if the current state is already known.3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice Prompt on".INFORMATIONIn the Voice Setup Help screen, the com-mands possible for input within the current mode are displayed. For example, if the Voice prompt is currently in Off state, then the com-mand Voice prompt ON will be displayed on the screen. Speaker adaptation 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." Or the "Speaker adapta-tion" command can be directly inputted. 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Speaker adaptation".
VOICE COMMAND SYSTEM 5-5VOICE COMMAND SYSTEM 4. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Yes". 5. Listen and repeat the 20 commands (approximate) as instructed by the device. ● Reset Speaker adaptation: Returns to previ-ous state prior to applying Speaker adapta-tion. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Reset Speaker adaptation".
5-6 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMVoice command list The voice commands for this system are divid-ed into Global commands and Local com-mands. ● Global command () : Commands which operate in all operating modes. ● Local command () : Commands which operate only when the corresponding mode is operating or when the mode screen to the corresponding mode is dis-played. Command list of Audio systemFM/AM RadioCommand Operation● Radio Plays the most recent frequency for the most recently operated band.● (Radio) AM Plays the most recent frequency for the corresponding band. ● (Radio) FM Plays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played. ● FM <1 or 2> Plays the most recent frequency for the corresponding band. ● AM frequency <530 to 1710>(ex. AM frequency 1310) Plays the desired AM band frequency. ● FM frequency <87.5 to 107.9>(ex. FM frequency 99.1) Plays the desired FM band frequency.● AM Preset <1 to 6> Plays the desired AM band preset frequency. ●FM <1 or 2> Preset <1 to 6> Plays the desired preset frequency of FM1 or FM2 band. ○ Preset <1 to 6> Plays the desired preset frequency for the current band. ○ Seek Up Searches and plays the next frequency of the current band.
VOICE COMMAND SYSTEM 5-7VOICE COMMAND SYSTEMCommand Operation○ Seek Down Searches and plays the previous frequency of the current band. ○ Preset Up Plays the next preset frequency of the current band. ○ Preset Down Plays the previous preset frequency of the current.○ Scan Scans all frequencies within the current band. ○ Preset Scan Scans the 6 preset frequencies of the current band. ○ Auto Preset / Auto Store Searches all frequencies within the current band and stores the 6 frequencies with the most superior reception as preset buttons. Command Operation● XM Plays the last channel within the last band from XM1, XM2, and XM3. ● XM <1 or 2 or 3> Plays the most recent channel for the corresponding Band. ● XM Channel <0 to 255> Plays the desired XM band channel. ● XM <1 or 2 or 3> Preset <1 to 6> Plays the desired preset channel for XM1 or XM2 or XM3 band. ○ Channel < 0 to 255 > Plays the desired channel of the current band.○ Preset <1 to 6> Plays the desired preset channel of the current band. ○ Channel Up Plays the next channel of the current band. ○ Channel Down Plays the previous channel of the current band. XM Radio
5-8 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMCommand Operation○ Preset Up Plays the next preset channel of the current band. ○ Preset Down Plays the previous preset channel of the current band. ○ Scan Scans all channels within the current band. ○ Preset Scan Scans all preset channels within the current band.Command Operation●DISC Plays the DISC already inserted in the CD Player. ●CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.●CD track <1 to 665> If the DISC inserted in the CD Player is a CD, then CD Mode will start and plays the desired track. ○Track <1 to 665> Plays the desired track. ○Next track Plays the next track. ○Previous track Plays the previous track. ○Scan Scans all tracks on the CD DISC. ○Repeat track Repeats the current playing track.○Random Plays the tracks of the CD DISC in random order.○Normal play Turns off the Scan, Repeat, and Random functions. CD
VOICE COMMAND SYSTEM 5-9VOICE COMMAND SYSTEMCommand Operation● DISC Plays the DISC already inserted into the CD Player. ● CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.● MP3 If the DISC inserted in the CD Player is an MP3 DISC, then the MP3 will be played. ○ Next file Plays the next file. ○ Previous file Plays the previous file. ○ Next folder Plays the first file in the next folder. ○ Previous folder Plays the first file in the previous folder. ○ Scan Scans all files within the MP3 DISC. ○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each. ○ Repeat File Repeats the current playing file. ○ Repeat Folder Repeats all tracks within the current playing folder. ○ Random Plays all files within the MP3 DISC in random order. ○ Random Folder Plays all files within the current playing folder in random order. ○ Normal play Turns off the Scan, Repeat, and Random functions.MP3
5-10 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMUSB MP3USB IMAGECommand Operation● USB If the USB has been connected to the device, plays the MP3 files within the USB.○ Next file Plays the next file..○ Previous file Plays the previous file.○ Next folder Plays the first chapter of the next folder.○ Previous folder Plays the first chapter of the previous folder.○ Scan Scans all files within the USB.○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each.○ Repeat File Repeats the current playing file.○ Repeat Folder Repeats all songs within the current playing folder.○ Random Plays all files within the USB in random order.○ Random Folder Plays all files within the current playing folder in random order.○ Normal play Turns off the Scan, Repeat, and Random functions.Command Operation● USB If the USB IMAGE has been connected to the device, plays the image files within the USB.○Next file Moves to the next file. ○Previous File Moves to the previous file.
VOICE COMMAND SYSTEM 5-11VOICE COMMAND SYSTEMiPodOthersCommand Operation● iPod Plays the songs within the iPod if the iPod has been connected to the device. ○ Next song Plays the next song. ○ Previous song Plays the previous song. ○ Repeat song Repeats the current playing song. ○ Random Plays all songs within the iPod in random order. ○ Random Album Plays all songs within the current playing album in random order.○ Normal play Turns off the Repeat and Random functions.Command Operation● Line in Plays the unit connected with the AUX terminal.● Audio on Turns on the Audio/Video. ● Audio off Turns off the Audio/Video.Command Operation○Next folder Moves to the next folder. ○Previous folder Moves to the previous folder.
5-12 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMCommand list of Navigation systemNavigation commands will operate only agreeing to the terms and conditions for the Navigation system. MapCommand Operation●Map Current location Displays the current position of the vehicle.●Zoom In Decreases the map zoom by one level. ●Zoom Out Increases the map zoom by one level. ●Zoom minimum Displays the map screen in the maximum zoom level. ●Zoom maximum Displays the map screen in the minimum zoom level. ●Zoom level <1 to 14> Displays the map in the zoom level selected from the 14 levels. ●Zoom <scale factor> Displays the map in the corresponding zoom.150 feet / 50 meters300 feet /100 meters700 feet / 200 meters0.25 miles / 400 meters0.5 miles / 800 meters1 mile / 1.6 kilometers2 miles / 3.2 kilometers4 miles / 6.4 kilometers8 miles / 12 kilometers
VOICE COMMAND SYSTEM 5-13VOICE COMMAND SYSTEMCommand Operation 16 miles / 25 kilometers32 miles / 50 kilometers64 miles / 100 kilometers130 miles / 200 kilometers250 miles / 400 kilometers(ex.Zoom 0.25 miles, zoom 400 meters)○ North up Displays the map in North Up mode. ○ Heading up Displays the map in Heading Up mode. ○ Show <POI name> (ex. Show ATM) Displays the selected POI categories. [POI Category list], page 5-17.○ Hide <POI name> (ex. Hide ATM) Hides the selected POI categories. [POI Category list], page 5-17.○ Hide all Hides all POI categories. ○ Daylight mode Converts the map display into daylight mode. ○ Night mode Converts the map display into night mode. ○ Auto mode Converts the map display is between daylight/night modes automatically.
5-14 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMDestinationCommand Operation●Find address Sets the destination through address search for route guidance.●Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search.●Find nearest <POI name> Sets a POI near the current position as the destination by directly inputting the POI name for route guidance. [POI Category list], page 5-17.●Destination POI by phone number Sets the destination by searching the phone number of the facility.●Find Emergency <Category>(ex. Find Emergency Hospital) Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. ●Destination by address book Sets one of the list of previously registered addresses in the address book for the user as the destination.●Previous destination Sets one of the previous destination as the current destination.●Previous start point Sets the previous start point as the current destination.●Go home Sets the previously registered home address as the destination for route guidance. ●Destination by memory point <1 to 5> Sets a previously registered memory point as the destination for route guidance
VOICE COMMAND SYSTEM 5-15VOICE COMMAND SYSTEMRouteCommand Operation●Cancel route Deletes the designated destination and terminates the route guidance.●Repeat voice guidance Repeats the route guidance. ●Detour <1 or 2 or 5 or 10> miles Searches detour routes within a <1|2|5|10> mile radius. ●Detour <1 or 2 or 5 or 10>kilometers Searches detour routes within a <1|2|5|10> kilometer radius. ●Replan recommended route Recalculates the route with the recommended route. ●Replan shortest route Recalculates the route with the shortest route. ●Distance to destination Reports the remaining distance until destination by voice. ●Time to destination Reports the remaining time until destination by voice.○ View route If the destination has been set, displays the whole route screen until the destination. ○Start guidance Sets the scroll mark displayed on the map as the destination and starts route guidance.
5-16 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMOthersCommand Operation●Voice guidance on Turns the Voice Guidance On. ●Voice guidance off Turns the Voice Guidance Off.●Voice guidance louder Increases the Voice Guidance volume by 1 level. ●Voice guidance softer Decrease the Voice Guidance volume by 1 level. ●Store marked location to <text tag>(ex. Store marked location to user 1) Registers the selected location into the selected Address book.
VOICE COMMAND SYSTEM 5-17VOICE COMMAND SYSTEM●POI Category listAll restaurants Car Wash Home Specialty Store Court HouseFast Food restaurant Motorcycle Dealership Clothing shop Fire DepartmentAmerican restaurant All Travel Shoe Store Convention CenterFrench restaurant Airport Pharmacy City HallItalian restaurant Hotel All Recreation Civic CenterContinental restaurant Tourist Information Amusement Park SchoolMexican restaurant Travel Agent Museum Government OfficesJapanese restaurant Tourist Attraction Cinema Waste & SanitaryChinese restaurant City Cnter Sports Activities UtilitiesKorean restaurant Rental Car Agency Sports Complex All ServicesVegetarian Food restaurant Campground Golf Course HospitalSeafood restaurant Ferry Terminal Winery DentistLatin American restaurant Bus Station Video & Game Rental PhotographyAsian restaurant Local Transit Ski Resort Tax ServiceAfrican restaurant Train Station Recreation Area Medical ServiceCoffee Shop All Shopping Other Recreation AttorneyOther restaurants Department Store All Financial Service Funeral DirectorAll automotive Convenience Store Bank Hair & BeautyGas Station Shopping Center ATM Cleaning & LaundryParking Music Store Check Cashing Service Social ServiceAuto service Grocery Store Money Transfer Physician Road Assistance Bookstore Business Facility Communication servicesHyundai Dealership Electronics Store All Community Tailor & AlterationAutomobile Dealership Hardware Store Police Station Mover servicesAuto Parts Gifts shop Post OfficeRest Area Sporting Goods store Library
5-18 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMCommand list of HelpCommand list of PhoneCommand Operation●Call Name Makes the call to the name.●Dial Number makes the callto the number.●Redial The recently called number is redialed.●Recent Calls The user can select a number from the outgoing, incoming, and missed calls.Command Operation●Help Displays the main Help screen. ●Destination Help Displays the Destination related command list. ●Map Help Displays the Map related command list. ●Radio Help Displays the FM/AM radio related command list. ●XM Help Displays the XM radio related command list. ●Disc Help Displays the DISC mode related command list for the disc inserted in the CD Player. ●iPod Help Displays the iPod related Command list. ●USB Help Displays the USB related command list. ●Phone Help Displays the Phone help screen. ●Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen.
VOICE COMMAND SYSTEM 5-19VOICE COMMAND SYSTEMSearching destination by voice commandFind addressSets the destination through address search for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find address".3. Say "Change state" to change the state.4. Say the state name.5. Say the city name.6. Say the street name.7. Say the House number. Here, the range which can be inputted will be displayed. 8. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.
5-20 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMINFORMATIONSpell recognition● It is possible to search the state, city, street names through the text line inputted by the user. ● To enter spell search mode, say the "Spell state, city, street names" command as dis-played on the screen. ● Text lines can be inputted continuously.Pick-List(n-best list) ● If there are more than one voice result, then a pick-list which can be selected by the user will be displayed. ● There may be more than one list page. The desired page can be viewed by using com-mands such as "next page" or "previous page". ● Here, the "Line + number" voice command can be used to select the desired result, such as "Line one". Pressing the desired result is not supported. ● Also, selectable areas will be highlighted in yellow, allowing the user to easily see which results can be selected. Find nearest POISets a POI near the current position as the destination for route guidance through POI category search. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "find nearest POI".3. Select the desired main category.
VOICE COMMAND SYSTEM 5-21VOICE COMMAND SYSTEM4. Select the desired sub category. 5. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".6. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. Find nearest <POI name> Sets a POI near the current position as the destination by directly inputting the POI name for route guidance.1.  Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find nearest Parking".3. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".
5-22 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEM4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Destination POI by phone numberSets the destination by searching the phone number of the facility.1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination POI by Phone number".3. Input the 10 numbers for the phone num-ber. INFORMATIONContinuous recognition of phone numbers is possible, and the recognized result will be dis-played in block units. To correct a block unit, say "correct". To delete the entire result, say "delete". To have the input read back, say "repeat".4. Say "Show list" to view the resulting search list.
VOICE COMMAND SYSTEM 5-23VOICE COMMAND SYSTEM5. Select the desired location from the list and say the line command.6. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Find emergency <Category> : Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the voice command. ex)“Find emergency hospital”3. Select the desired location from the list and say the line command. 4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.
5-24 VOICE COMMAND SYSTEMPART 5 VOICE COMMAND SYSTEMDestination by address bookSets one of the list of previously registered addresses in the address book for the user as the destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by address book".3. Select the desired user name(Address book name).4. Select the desired location from the list and say the line command. 5. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous destinationSets one of the previous destination as the current destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous destination".3. Select the desired location from the list and say the line command.
VOICE COMMAND SYSTEM 5-25VOICE COMMAND SYSTEM4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous start point Sets the previous start point as the current destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous start point".3. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Go home Sets the previously registered home address as the destination for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Go home".Destination by memory point <1 to 5>Sets a previously registered memory point as the destination for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by memory point 1".
PART 6 BLUETOOTH HANDSFREEPART 6BLUETOOTH HANDSFREEBefore using the Bluetooth Handsfree …………………………… 6-2What is Bluetooth? ……………………… 6-2Functions supported by Bluetooth Handsfree …………………… 6-2Converting Bluetooth Handsfree mode ………………………………… 6-2Converting from Audio/Navigation mode to Bluetooth Handsfree mode ……………… 6-2Converting from Bluetooth Handsfree mode to Audio/Navigation mode ……… 6-3Pairing and connecting a Bluetooth phone ………………………………… 6-4Pairing a mobile phone ………………… 6-4Deleting a paired phone ……………… 6-6 Connecting a mobile phone …………… 6-7Disconnecting a mobile phone ………… 6-8Bluetooth Handsfree screen layout 6-9Bluetooth Handsfree screen andfunctions ………………………………… 6-9When there is no mobile phone connected …………………………… 6-9When a mobile phone is connected … 6-9When receiving an incoming call …… 6-10When already on a call ……………… 6-10When there is a call waiting ………… 6-10Making a call ………………………… 6-11Making a call by dialing a phone number ………………………………… 6-11Making a call from Speed Dial ………… 6-11Making a call by redialing ……………… 6-12Answering a call …………………… 6-13Answering an incoming call …………… 6-13Rejecting an incoming ………………… 6-13Operating menus during a call …… 6-14Switching call to the mobile phone …… 6-14Activating Call waiting ………………… 6-14Ending a call …………………………… 6-15Phone Book ………………………… 6-16Making a call from the Phone book …… 6-16Searching the Phone Book ……………… 6-17 Searching by name ………………… 6-17Searching by number ……………… 6-18Call History List ……………………… 6-19Making a call from Call history ………… 6-19Sorting call history ……………………… 6-19Dialed number ……………………… 6-20Received number …………………… 6-20Missed number ……………………… 6-20
BLUETOOTH HANDSFREE 6-1BLUETOOTH HANDSFREEPART 6BLUETOOTH HANDSFREEPhone Music ………………………… 6-21Before playing Phone music …………… 6-21Starting Phone Music …………………… 6-21Phone music screen layout …………… 6-22Selecting Phone music files …………… 6-23Bluetooth settings ………………… 6-24Pairing and connecting a mobile phone … 6-24Setting mobile phone auto connect priority ………………………………… 6-24Setting Handsfree volume ……………… 6-25Setting Audio streaming ……………… 6-25Advanced settings ……………………… 6-26Setting Contacts Auto Download (Sync) …6-27Searching and modifying my device properties …………………………… 6-27Changing passkey ………………… 6-28Deleting all paired phones ………… 6-28Initializing Bluetooth handsfree …… 6-29Important information …………… 6-30About pairing mobile phones ………… 6-30About making/answering phone calls … 6-31About Bluetooth device environment … 6-31Mobile Phone Compatibility …………… 6-32
6-2 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEBefore using the Bluetooth HandsfreeWhat is Bluetooth?● Bluetooth allows wireless transmission of infor-mation between PC, mobile phones, headsets, PDAs, printers and other devices within close ranges by using 2.45Ghz frequency short-dis-tance wireless telecommunication technolo-gies.● Within this vehicle, users can make hands-free calls, transmit mobile phone data, and play audio streaming files by connecting a mobile phone with the system.Functions supported by Bluetooth Handsfree● Pairing mobile phones (Up to 5 phones)● Connecting/disconnecting mobile phones● Making/Answering phone calls● Downloading a Phone Book●Downloading a Call history list● Playing music saved in a Bluetooth phone in the vehicleSome functions may not be supported in some mobile phone. Converting Bluetooth Handsfree modeConverting from Audio/Navigation mode to Bluetooth Handsfree mode 1. While in Audio mode or Navigation mode, press the PHONE key or the key on the steering wheel. Bluetooth is a trademark owned byBluetooth SIG, Inc.
BLUETOOTH HANDSFREE 6-3BLUETOOTH HANDSFREE2. The system will change to Bluetooth Handsfree mode and display the PHONE screen. 3. The following screen will become displayed if no mobile phone has been connected.Converting from Bluetooth Handsfree mode to Audio/Navigation mode1. While in Bluetooth Handsfree mode, press an Audio/Navigation mode key, such as FM/AM or MAPVOICE .2.The corresponding mode will be displayed.INFORMATIONMost of the functions of the Audio or SETUP modes are not supported while on a Bluetooth Handsfree call. The call volume and Navigation (MAPVOICE, DEST, ROUTE) screens can be ope-rated.
6-4 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEPairing and connecting a Bluetooth phonePairing a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Pairings button on the Settings screen. 3. The list of currently paired phones will be displayed. Press the Add to button to pair a new mobile phone.INFORMATIONFor safety reasons, pairing a Bluetooth phone is not possible when the vehicle is in motion. Park the vehicle in a safe location to pair a new phone. It is possible to pair up to five mobile phones. In order to pair a new phone when there are already five mobile phones paired, you must first delete one of the pre-viously paired phones.4. From the Bluetooth device list within the mobile phone, add the car handsfree. The default name of the car system is .For more information on registering Bluetooth devices from the mobile phone, please refer to the mobile phone user's manual. INFORMATIONWhile conducting a Bluetooth device search from the mobile phone, operating to another screen will prevent the car handsfree from being found in the mobile phone. Always con-duct searches for Bluetooth devices with the Search Bluetooth device screen displayed.
BLUETOOTH HANDSFREE 6-5BLUETOOTH HANDSFREE5. When pairing the car handsfree from the mobile phone, a passkey input window will become displayed on the mobile phone screen. Input the passkey set within the car system into the mobile phone input win-dow. (The factory state passkey is 0000.) As shown in the figure, once the passkey beco-mes successfully inputted, the Bluetooth connection between the car system and mobile phone will start.6. Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate.INFORMATIONSome functions may not be supported due to limited Bluetooth compatibility between the car system and mobile phone.
6-6 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEDeleting a paired phone1. Press the Settings button on the PHONE screen. 2. Press the Pairings button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to delete from the list and press the Delete button.4. A pop-up asking whether you wish to dele-te the paired phone will be displayed. Press the Yes button to delete the paired phone and the No button to cancel. CAUTION!A mobile phone cannot be deleted if it is currently connected to the car system. To delete the phone, first disconnect the mobile phone and try again.
BLUETOOTH HANDSFREE 6-7BLUETOOTH HANDSFREE Connecting a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Connections button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to co nn ec t fro m the list and press the Connect button. INFORMATIONWhen there are no paired phones, pair the mobile phone through [Settings>Pairings> Add to]. For more information on pairing mobile phones, refer to the user's manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. 4. The Bluetooth connection between the car system and mobile phone will start.5. Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate.
6-8 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREE4. If the connection between the mobile phone and Bluetooth fails, the following pop-up will be displayed. If problems occur while connecting Bluetooth, check for the following conditions.● Whether the mobile phone you wish to con-nect is in the vicinity of the car system● Whether the power of the mobile phone Bluetooth has been turned off● Whether the mobile phone Bluetooth has been set to hidden state● Whether there are Bluetooth compatibility issues between the car system and another mobile phoneDisconnecting a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Connections button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to dis-co nn ec t fro m the list and press the Disconnect button.4. pop-up asking whether you wish to discon-nect the mobile phone will be displayed. Press the Yes button to disconnect the mobile phone and the No button to cancel.
BLUETOOTH HANDSFREE 6-9BLUETOOTH HANDSFREEBluetooth Handsfree screen layoutBluetooth Handsfree screen andfunctionsWhen there is no mobile phone connected1Settings : the user can set desired settings for the Bluetooth handsfree, such as pair/delete mobile phone, connect/ disconnect mobile phone, set call volume, change device name and change passkey.When a mobile phone is connected2Phone battery charge status : displays the battery charge status of the connected mobile phone. The battery charge status may not be displayed in some mobile pho-nes. 3Signal strength : displays the mobile phone signal strength. The signal strength may not be displayed in some mobile pho-nes.4Bluetooth connection state : becomes dis-played when a Bluetooth phone has been connected with the car system. 5Name of connected mobile phone : dis-plays the name of the connected mobile phone. 6Phone number input window : displays the inputted phone number.7Dial : input the phone number through the dial pad. 8SEND : if a number has not been entered into the phone number input window, Pressing the send button displays the call history list screen.9Del : deletes the inputted number one digit at a time.10 END : if a number has been inputted, then erases the entire number.11 Contacts : displays the phone book screen. The user can search previously saved phone numbers. The phone contact list may not be displayed in some mobile pho-nes.1256118 9 103 47
6-10 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEWhen receiving an incoming call12 Accept : accepts the incoming call. 13 Reject : rejects the incoming call.When already on a call14 Busy icon : when already on a call, displays an icon shaped like a receiver. 15 Name of incoming caller : displays the name of incoming caller. The name of the incoming caller will not be displayed if the caller's phone number has not been pre-viously registered in the phone book.16 Number of incoming caller : displays the number of the incoming caller. 17 Call state : displays the call state, such as talk time, phone connection, and end time. 18 END : ends the call.19 Private : when talking on the car hands-free, use this function to switch the call to the mobile phone. 20Mute : use this function to mute the out-going volume. Pressing the Mute button will display the at the top right side of the screen and the caller will not be able to hear the conversation taking place in the car. Press the Mute button again to release the Mute function.When there is a call waiting 21Switch : use this button to switch between callers when there are calls on call waiting. 22END : use this button to end the calls with all callers. 21 221215141617 1819 2013
BLUETOOTH HANDSFREE 6-11BLUETOOTH HANDSFREEMaking a callMaking a call by dialing a phone number1. Use the number pad on the right side of the PHONE screen to input the number you wish to call.2. Press the SEND button or the key on the steering wheel to make the call.INFORMATIONTo modify, press the Del button to delete the inputted number one digit at a time.Press the END button or the key on the steering wheel to cancel the call.Making a call from Speed Dial 1. Use the number pad on the right side of the PHONE screen to input a speed dial num-ber.INFORMATIONOnly speed dial numbers already stored on the mobile phone can be used for speed dial calls. Up to 2-digit speed dial numbers are suppor-ted.
6-12 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREE2. Press the SEND button or the key on the steering wheel to make the call.INFORMATIONFor 2-digit speed dial numbers, press and hold the 2nd digit to make a call to the speed dial number.Making a call by redialing1. Press and hold (over 0.8 second) the SEND button on the PHONE screen or the key on the steering wheel.INFORMATIONRedialing is not possible when there is no call history or the call history list is being down-loaded from the mobile phone. When there is no call history list, the SEND button will be inactive.2.The recently called number is redialed.INFORMATIONIt is not possible to display the Audio mode and Settings screen when on a phone call. Only the call volume and Navigation (MAPVOICE, DEST, ROUTE) screens can be operated.
BLUETOOTH HANDSFREE 6-13BLUETOOTH HANDSFREEAnswering a callAnswering an incoming call 1. The following screen will be displayed when you receive an incoming call.2. To answer the incoming call, press the Accept button or the key on the steering wheel.Rejecting an incoming1. The following screen will be displayed when you receive an incoming call.2. To reject the incoming call, press the Reject button or the key on the stee-ring wheel. The incoming call will be rejec-ted. INFORMATIONUpon receiving a call, the [Reject] function may not be supported in some mobile pho-nes.
6-14 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEOperating menus during a callSwitching call to the mobile phone1. If you wish to switch the call to the mobile phone while talking on the car handsfree, press the Private button or press and hold (over 0.8 second) the key on the stee-ring wheel.2. As shown, the call will be switched to the mobile phone.INFORMATIONIf you wish to switch the call to the car hands-free while talking on the mobile phone, press the Use handsfree button or press and hold (over 0.8 second) the key on the steering wheel. The call will be switched to the car handsfree.Activating Call waiting1. If another person calls while already on a call, the following screen will be displayed. 2. Press the Accept button or the key on the steering wheel to receive the inco-ming call by switching to the new caller.
BLUETOOTH HANDSFREE 6-15BLUETOOTH HANDSFREE 3. To switch again to the other caller, press the Switch button or the key on the stee-ring wheel. The other call will be received and the previous call will switch back to call waiting. INFORMATIONPress the End button or the key on the steering wheel to end the current call and call waiting.Ending a call1. To end a call, press the End button or the key on the steering wheel.2.The call will be ended.
6-16 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEPhone BookMaking a call from the Phone book 1. Press the Contacts button on the PHONE screen.2.The phone book list will be displayed. INFORMATION● The system may begin to slow down when downloading the phone book in some mobile phones.● Upon connecting a mobile phone, the phone book lists saved in the mobile phone will automatically be downloaded. The phone book download function may not be supported in some mobile phones. ● If you do not wish to automatically down-load the mobile phone contacts to the vehi-cle, turn the Contacts Sync setting OFF. 3. Select the number you wish to call from the phone book list and press the SENDbutton.4. The call will be made to the selected num-ber. INFORMATION●When there are more than 2 numbers saved in one phone number list, if the list is repea-tedly selected, the registered phone num-bers will be displayed sequentially on the list. ●The Mobile Phone/Office/Home categories received via the mobile phone may differ from the information actually stored in the mobile phone.● Select the phone number you wish to con-nect by repeatedly selecting the phone number list and press the SEND button to make the call to the selected number.
BLUETOOTH HANDSFREE 6-17BLUETOOTH HANDSFREESearching the Phone Book1. Press the Contacts button on the PHONE screen.2. Press the Search button on the Contacts screen. 3. Phone numbers can be searched by either Search by name or Search by number . From the two methods, select the search method you wish to use.Searching by name 1. Press the Search by name button on the Phonebook search screen. 2. Input the name you wish to search and press the Done button.3. The search results will be displayed on the screen.
6-18 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREESearching by number 1. Press the Search by number button on the Phonebook search screen. 2. Input the phone number you wish to search and press the Done button.3. The search results will be displayed on the screen.
BLUETOOTH HANDSFREE 6-19BLUETOOTH HANDSFREECall History ListMaking a call from Call history 1. Press the SEND button on the PHONE screen or press the key on the steering wheel. 2. The call history list will be displayed. Select the number you wish to call from the call history list and press the SEND button.3. The call will be made to the selected num-ber. Sorting call history 1. The call history can be displayed by sorting the incoming calls, outgoing calls and mis-sed calls.2. When pressing the Dialed, Received, or Missed button, the corresponding call his-tory list will be displayed.
6-20 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEDialed number Received numberMissed numberINFORMATIONIf there are no entries saved in the Dialed, Received, or Missed lists, the corresponding button will be inactive. Up to 20 entries can be saved in each list.
BLUETOOTH HANDSFREE 6-21BLUETOOTH HANDSFREEPhone MusicBefore playing Phone musicMusic saved in the mobile phone can be pla-yed in the car through Bluetooth audio strea-ming.Phone music can be played only when a Bluetooth phone has been connected. To play phone music, connect the Bluetooth phone to the car system. For more information on con-necting Bluetooth, please refer to the user's manual [Pairing and Connecting a Bluetooth phone]. If the Bluetooth is disconnected while playing phone music, the music will be discontinued. The audio streaming function may not be supported in some mobile phones. Only one function can be used at a time bet-ween the Bluetooth handsfree or Phone music function. For example, if you convert to the Bluetooth handsfree while playing Phone music, the music will be discontinued. Playing music from the car is not possible when there are no music files stored in the mobile phone. Starting Phone Music1. Repeatedly press the MEDIA key on the front panel or the MODE key on the stee-ring wheel to enter Phone music mode.
6-22 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEINFORMATIONEach press of the MEDIA key on the front panel will change the function in the order of DISC → USB or iPod → AUX → Phone Music → DISC ...Each press of the MODE key on the steering wheel will change the audio mode in the order of FM1 → FM2 → AM → XM1 → XM2 →XM3 → DISC → USB or iPod → AUX → Phone Music → FM1...It is not possible to enter Phone music mode if the mobile phone is not connected or if the audio streaming setting within Bluetooth handsfree settings has been set to [Disable streaming audio]. For more information on audio streaming set-ting, please refer to the user’s manual [Bluetooth settings > Setting Audio strea-ming]. 2.The Phone music screen is displayed. INFORMATIONWhile music saved in the mobile phone will automatically begin playing after converting to the Phone music screen, this music player function may not be supported in some mobi-le phones. If music does not begin playing even after converting to the Phone music screen, try starting the music directly from the mobile phone.Phone music screen layout1Information Bar : displays information for the currently playing song.2File Down button : plays the previous song. 3Play/Pause button : plays/pauses the song. 4File Up button : plays the next song.5Sound button : sets the FAD/BAL and BAS/MID/TRE. 12 3 4 5
BLUETOOTH HANDSFREE 6-23BLUETOOTH HANDSFREESelecting Phone music files1. Press the , buttons on the Phone music screen or the ∨SEEK, TRACK∧ keys on the system. The previous or next song will be played each time the button or key is pressed.INFORMATIONThe file selection function may not be suppor-ted in some mobile phones.
6-24 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEBluetooth settingsPairing and connecting a mobile phoneFor more information on pairing and connec-ting a mobile phone, please refer to [Pairing and Connecting a Bluetooth phone]. Setting mobile phone auto connect priorityINFORMATIONAfter turning on the car ignition and the sys-tem is booted up, the Bluetooth connection between the car system and mobile phone is automatically made. The Bluetooth connection will be conducted in the order of mobile phone priority. The auto connect priority will be supported only for previously paired mobile phones. 1. Press the Settings button on the PHONE screen. 2. Press the Priority button on the Settings screen. 3. The paired mobile phone list and the mobi-le phone connection priority will be displa-yed. When wishing to change the priority order, select the mobile phone from the list and use the , buttons to change its priority. Press the Done button to save the chan-ged mobile phone priority.
BLUETOOTH HANDSFREE 6-25BLUETOOTH HANDSFREESetting Handsfree volume1. Press the Settings button on the PHONE screen. 2. Press the Volume button on the Settings screen. INFORMATIONThe Bluetooth handsfree volume can be adjusted only when a mobile phone has been connected. The Volume cannot be set if no mobile phone has been connected. Use the , buttons to set the desired volume on the Phone volume screen. Press the Done button to save. INFORMATIONWhile on a call, turning the POWER knob to the left/right or pressing the ∧VOL∨ key on the steering wheel will also adjust the call volume.Set the incoming call volume accordingly.Setting Audio streaming1. Press the Settings button on the PHONE screen. 2. Press the Streaming audio button on the Settings screen.
6-26 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREE3.Streaming audio setting is selected.INFORMATIONEnable streaming audio: repeatedly press the MEDIA ke y or the MODE ke y to enter Phone music mode. Phone music can be pla-yed through Bluetooth audio streaming. Disable streaming audio: even if the MEDIA key or the MODE key is repeatedly pressed,will not be available. Phone music through Bluetooth audio strea-ming is not supported. Advanced settingsBluetooth advanced settings can be changed. Enter advanced settings through the following way.1. Press the Settings button on the PHONE screen. 2. Press the Advanced setup button on the Settings screen. INFORMATIONFor safety reasons, operation of Advance setup is not possible when the vehicle is in motion. Please park in a safe place to make changes to Advanced setup.3. The Advance setup screen will be displayed. In Advance setup, the following four set-tings can be made.
BLUETOOTH HANDSFREE 6-27BLUETOOTH HANDSFREESetting Contacts Auto Download (Sync)1. While in Advanced setup press the Contacts Syncbutton.2. After turning Contacts Sync ON/OFF, press the Done button.INFORMATION● If Contacts Sync is turned ON, the contacts and call history in your mobile phone will automatically be downloaded to the vehicle each time you connect a Bluetooth device.Searching and modifying my device properties1. Press the Device information button on the Advance setup screen. 2. Displays the Device information such as the name and address of the car system. To modify the device name, press the Change name button.
6-28 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREE3. Use the key pad to input the Device name you wish to modify. 4. After inputting is complete, press the Done button to save. Changing passkey 1. Press the Change passkey button on the Advance setup screen. 2. Once the Change passkey screen is displa-yed, input the desired passkey and press the Done button. INFORMATION The passkey is a 4-digit authentication code used for the Bluetooth connection between the mobile phone and car system. The default passkey is set to 0000.Deleting all paired phones1. Press the Delete all paired phones button on the Advance setup screen.
BLUETOOTH HANDSFREE 6-29BLUETOOTH HANDSFREE2. A pop-up asking whether you wish to dele-te all paired phone will be displayed. Press the Yes button to delete all paired phones or the No button to cancel. 3. If Yes button is pressed, all currently pai-red phones will be deleted.Initializing Bluetooth handsfree 1. Press the Restore factory settings button on the Advance setup screen. 2. A pop-up asking whether you wish to initia-lize the Bluetooth handsfree will be displa-yed. Press the Yes button to initialize the Bluetooth handsfree system and the No button to cancel.INFORMATIONUpon initializing the Bluetooth handsfree, the entire paired phone list will be deleted and all Bluetooth related settings will be restored to factory state.3. If Yes is pressed, the Bluetooth handsfree settings will be initialized.
6-30 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREEImportant information About pairing mobile phones I cannot search for mobile phones through the car system. What is the cause? Check to see whether the mobile phone you wish to connect supports Bluetooth function. If your mobile phone supports Bluetooth, check to see that whether the Bluetooth settings in the mobile phone have been set to hidden state or if the Bluetooth power has been turned off. If the device has been set to hidden, relea-se the hidden state and if the Bluetooth power has been turned off, turn the power ON and try searching again. What is the difference between pairing a mobile phone and connecting a mobile phone? Paring is the process of creating a secure communication connection between the mobile phone and the car bluetooth sys-tem.Through a two-way passkey between the car system and mobile phones, up to 5 mobile phones can be paired with the car system. The paired mobile phone will remain paired with the car system until the user deletes it manually. In addition, the call history lists and phone number books saved in each mobile phone will also be maintained until the paired phone is deleted. For more information on pairing mobile pho-nes, please refer to the manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. Connecting a mobile phone to Bluetooth by selecting the desired mobile phone from the paired phones. Within the car system, only one Bluetooth phone can be connected at one time. For more information, please refer to the manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. What is a Passkey? A passkey is an authentication code used for two-way communication of the car system and the mobile phone. Only 4-digit numbers can be used as pas-skeys. Passkeys are registered only once when pairing the phone number for the first time. The factory-set passkey is 0000. Q.A.A.A.Q.Q.
BLUETOOTH HANDSFREE 6-31BLUETOOTH HANDSFREEAbout making/answering phone calls How can I answer a call? When you receive an incoming call, press the key on the steering wheel or the Accept button on the PHONE screen to answer. To reject the incoming call, press the key on the steering wheel or the Reject button on the PHONE screen. What should I do if I am talking on the Handsfree but wish to switch the call to the mobile phone? To switch the call to the mobile phone, press the Private button on the PHONE screen or press and hold (over 0.8 second) the key on the steering wheel. If you wish to switch the call back t o t h e c a r h a n d s f r e e , p r e s s t h e Use handsfree button on the PHONE screen or press and hold (over 0.8 second) the key on the steering wheel. About Bluetooth device environmentWhat is the range for Bluetooth wireless connection? The wireless connection range is within Aproximately 30 feet.How many mobile phones can be paired? It is possible to pair up to five phones with the car system. What is the reason why the call quality deteriorates? First, check to see the signal strength of the mobile phone. The call quality may deteriorate when the signal strength is low. Call quality may also deteriorate if metal objects, such as drink cans, are pla-ced near the mobile phone. A.Q.A.Q.A.Q.A.Q.A.Q.
6-32 BLUETOOTH HANDSFREEPART 6 BLUETOOTH HANDSFREE CAUTION!Mobile Phone CompatibilityDepending on the manufacturer, product and product specification, some mobile phones functions may not be supported or may not operate to specification. Carefully read the cautions listed below. ● The occurrence of problems upon using mobile phones may be caused by the mobi-le phone and not by the Audio/Navigation Unit.●  Even mobile phones which support Bluetooth function may not operate pro-perly if the mobile phone connection has been locked. Release the connection lock and try connecting the mobile phone with the system again.●  The Mobile phone battery icon and signal strength icon may not be properly displa-yed depending on the type of mobile phone.●  Call waiting is supported only when the connected mobile phones support this fea-ture. The call waiting pop-up may not be displayed in some mobile phones.●  Audio streaming mode will operate only when a Bluetooth phone has been connec-ted. Connecting or disconnecting a Bluetooth phone while audio streaming is operating will stop music play.●  The audio streaming function may not be supported in some mobile phones. ●  The phonebook may take a prolonged period of time to download or may not ope-rate in some mobile phones.●  The quality of Bluetooth handsfree calls may differ depending on the mobile phone.
PGS (Parking Guide System) 7-1PGS Parking Guide SystemPART 7PGS PARKING GUIDE SYSTEMAbout PGS (Parking Guide System) … 7-2Operating sequence of the PGS ………… 7-2
7-2 PGS (Parking Guide System)PART 7 PGS (Parking Guide System)About PGS (Parking Guide System)● PGS System is a system which provides monitored parking guidance. ● The PGS will operate automatically when the ignition Key is turned ON and the trans-mission lever is set to Reverse. The PGS will automatically stop operating when the transmisson shift lever is set outside of reverse.● The PGS (Parking Guide System) is an optio-nal feature.Operating sequence of the PGS1. Position the ignition key in ACC or ON.2. Position the transmission lever to R.3. The PGS mode will be displayed on the screen.INFORMATIONGuidance track is as follows :● Red line - 1.64 feet from the rear bumper● Yellow line - 3.28 feet from the rear bumper● Blue line - 9.84 feet from the rear bumper● Red line - Track following left side driver side wheel ●  Yellow line - Track following right side pas-senger side wheel
APPENDIX 8-1APPEINDIXPART 8APPENDIXTroubleshooting guide …………… 8-2Before thinking the product has malfunctioned ………………………… 8-2Troubleshooting ………………………… 8-3Map legend ………………………… 8-5Road color ……………………………… 8-5POI icons ………………………………… 8-5Landmark icons ………………………… 8-7INDEX ………………………………… 8-8
8-2 APPENDIXPART 8 APPENDIXTroubleshooting guideBefore thinking the product has malfunctioned1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your HYUNDAI dealer. Problem FunctionThere are small red, blue, or green dots on the screenBecause the LCD is manufactured with technology requiring high point density, a pixel deficiency or lighting may occur within 0.01% of total pixels.The sound or image is not working● Has the Switch for the vehicle been turned to [ACC] or [ON]?●Has the SYSTEM been turned OFF?The video is being displayed but sound is not working●Has the volume been set to a low level?●Has the volume been set on mute?When the power is turned on, the corners of the screen are dark● The display looking somewhat darker after prolonged periods of use is a normal phenomenon with LCD panels. It is not a malfunction.● If the screen is very dark, contact your nearest HYUNDAI dealer for assistance.Sound is working from only one speaker Is the position of FAL/BAL sound controls or volume adjusted to only one side?Sound and video does not work in AUX mode Are the audio and video connector jacks fully inserted into the AUX terminal?The external device is not working Is the external device connected with a standard connector cable?The road is missing Some map data may be missing or incorrect. The road name is spoken incorrectly The TTS(Text To Speech) engine speaks the street name based on the phonetic spelling. This will continuously be update with the map database.
APPENDIX 8-3APPEINDIXProblem Possible Cause SolutionThe power does not turn on.The fuse is blown. Replace with a suitable fuse. If the fuse is blown again, please contact your nearest HYUNDAI dealer for assistance.Device is not properly connected. Check to see that the device has been properly connected. XM only goes throughone category The XM mode is in category. Press the mode button to change to channel mode.The CD does not play.The DISC has not been inserted or has been inserted upside down. Insert the disc properly so that the sides are facing the correct direction. The DISC has been contaminated. Wipe dirt and other foreign substances from the DISC.The vehicle battery is low. Charge the battery. If the problem persists, please contact your nearest HYUNDAI dealer for assistance.A disc which is not supported by the device has been inserted. Insert a disc which is supported for play by the device. The video does not work. The brightness level has been set to the lowest level. Adjust the brightness to a higher level. The sound does notwork.The volume level is set the lowest level. Adjust the volume level. The connector is not properly connected. Check the connection. The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode. Troubleshooting
8-4 APPENDIXPART 8 APPENDIXProblem Possible Cause SolutionThe sound or video quality is low. The DISC is dirty or scratched. Wipe off water or dirt from the DISC. Do not use a disc which has been scratched. Vibration is occurring from the position in which the conversion switch has been installed. The sound may be short-circuited and the image distorted if the device begins to vibrate. The device will return to normal operation once the vibration has stopped. The color and tone quality of the image is low. Aging of the video display and deterioration in performance may cause certain quality degradations. The USB does not work. USB memory is damaged. Please use after formatting the USB into FAT 12/16/32 format. USB memory has been contaminated. Remove any foreign substances on the contact surface of the USB memory and multimedia terminal. A separately purchased USB HUB is being used. Directly connect the USB memory with the multimedia terminal on the vehicle. A USB extension cable is being used. Use standard USB Memory. A HDD type, CF, SD Memory is being used.. Use standard USB Memory. There are no music files which can be played. Only MP3,WMA file formats are supported. Please use only the supported music file formats. The iPod is not recognized even though it has been connected. There are no titles which can be played. Use iTunes to download and save MP3 files into the iPod. The iPod firmware version has not been properly updated. Use iTunes to update the firmware version and reconnect the iPod with the device. The iPod device does not recognize downloads. Reset the iPod and reconnect with the device.
APPENDIX 8-5APPEINDIXMap legend Road colorDay Road Type ColorFreewayArterialCountyCollectorLocalUnpaved localFerryNight Road Type ColorFreewayArterialCountyCollectorLocalUnpaved localFerryNo Category Sub Category Icon1RestaurantsRepresentation2Fast Food3American4French5Italian6Continental7Mexican8Japanese9Chinese10Korean11Vegetarian Food12Seafood13Latin American14Asian15AfricanNo Category Sub Category Icon16RestaurantsCoffee Shop17Others18AutomotiveRepresentation19Gas Station20Parking21Auto service22Road Assistance23Hyundai Dealership24Automobile Dealership25Auto Parts26Rest Area27Car Wash28Motorcycle Dealership29Travel Representation30AirportPOI icons
8-6 APPENDIXPART 8 APPENDIXPOI iconsNo Category Sub Category Icon31TravelHotel32Tourist Information33Travel Agent34Tourist Attraction35Popular Spot36Rental Car Agency37Campground38Ferry Terminal39Bus Station40Local Transit41Train Station42Shopping43ShoppingDepartment Store44Convenience Store45Shopping CenterNo Category Sub Category Icon46ShoppingMusic Store47Grocery Store48Bookstore49Electronics50Hardware Store51Gifts52Sporting Goods53Home Specialty Store54Clothing55Shoe Store56RecreationRepresentation57Amusement Park58Museum59Cinema60Sports ActivitiesNo Category Sub Category Icon61RecreationSports Complex62Golf Course63Winery64Video & Game Rental65Ski Resort66Recreation Area67Other Recreation68Financial ServiceRepresentation69Bank70ATM71Check Cashing Service72Money Transfer73Business Facility74CommunityRepresentation75Police Station
APPENDIX 8-7APPEINDIXPOI iconsNo Category Sub Category Icon76CommunityPost Office77Library78Court House79Fire Department80Convention Center81City Hall82Civic Center83School84Government Offices85Waste & Sanitary86Utilities87ServiceRepresentation88Hospital89Dentist90PhotographyNo Category Sub Category Icon91ServiceTax Service92Medical Service93Attorney94Funeral Director95Hair & Beauty96Cleaning & Laundry97Social Service98Physician99Communication100Tailor & Alteration101MudanzasNo Category Sub Category Icon1ServiceAirport2Park3Golf4UniversityLandmark icons
8-8 APPENDIXINDEXAAbout Bluetooth device environment … 6-31About making/answering phone calls ……………………………… 6-31About pairing mobile phones ………… 6-30About PGS (Parking GuideSystem) ……… 7-2Activating Call waiting ………………… 6-14Adaptive volume control ON/OFF ……… 3-52Adding to address book ………………… 3-27Adding waypoints ……………………… 3-32Adjusting audio volume …………………… 1-7Advanced settings ……………………… 6-26Answering a call ………………………… 6-13Answering an incoming call …………… 6-13Auto volume control ON/OFF ………… 1-10AUX ……………………………………… 2-29AUX screen ……………………………… 2-29BBasic operation and setting ……………… 1-6Basic operation for voice command control ………………………… 5-2BASS/MID/TREB ………………………… 1-10Before playing Phone music …………… 6-21Before thinking the product has malfunctioned …………………………… 8-2Before using the Bluetooth Handsfree …… 6-2Bluetooth Handsfree screen and functions 6-9Bluetooth Handsfree screen layout ……… 6-9Bluetooth settings ……………………… 6-24CCall History List ………………………… 6-19CD ……………………………………… 2-14CD ………………………………………… 5-8CD screen and functions ……………… 2-14Changing destination position ………… 3-27Changing passkey ……………………… 6-28Changing Route option ………………… 3-32Changing the map scale ………………… 3-8Clock Type ……………………………… 1-12Command list of Audio system …………… 5-6Command list of Help ………………… 5-18Command list of Navigation system …… 5-12Command list of Phone ………………… 5-18Condition for voice command system …… 5-2Conditions for voice recognition system … 1-8Connecting a mobile phone ……………… 6-7Connecting AUX ………………………… 2-29Connecting iPod device ………………… 2-22Connecting the USB …………………… 2-28Control panel ……………………………… 1-3Controller and functions ………………… 1-3Converting Bluetooth Handsfree mode … 6-2Converting from Audio/Navigation mode to Bluetooth Handsfree ……………………… 6-2Converting from Bluetooth Handsfree mode to Audio/ Navigation mode ………………… 6-3Current position map screen (without route) …………………………… 3-5DDaylight Saving Time …………………… 1-12Deleting a paired phone ………………… 6-6Deleting all avoid areas ………………… 3-41Deleting all paired phones ……………… 6-28Deleting an address book ……………… 3-47Deleting an address of address book … 3-46Deleting avoid area …………………… 3-41Deleting favorite place ………………… 3-50Deleting home address ………………… 3-48Deleting waypoints …………………… 3-34
APPENDIX 8-9APPEINDIXDestination ……………………………… 5-14Destination by address book …………… 5-24Destination by memory point <1 to 5> … 5-25Destination menu screen and functions … 3-12Destination POI by phone number …… 5-22Dialed number ………………………… 6-20Disc/Content format compatibility …… 2-12Disconnecting a mobile phone …………… 6-8Display mode …………………………… 1-11Display ON ……………………………… 1-11Display Photo Frame …………………… 1-13Display setting ………………………… 1-11Displaying / Hiding POI icons on the map … 3-9Displaying the list ………………………… 1-7Displaying/Hiding Q.POI icons …………… 3-9EEditing an address of address book …… 3-45Editing avoid area ……………………… 3-40Editing waypoints ……………………… 3-32Ejecting a Disc ………………………… 2-13Ending a call …………………………… 6-15Entering XM Data mode …………………… 4-2FFAD/BAL …………………………………… 1-9Find address …………………………… 5-19Find emergency <Category> …………… 5-23Find nearest <POI name> ……………… 5-21Find nearest POI ………………………… 5-20Finishing route guidance (Delete Destination) …………………………… 3-30FM/AM Radio ……………………………… 2-2FM/AM Radio ……………………………… 5-6FM/AM screen and functions ……………… 2-2For safe and efficient operation ………… 2-10Functions supported by Bluetooth Handsfree ………………………………… 6-2GGiving voice command …………………… 1-9Go home ………………………………… 5-25GPS signal reception state ………………… 3-2GPS Time ………………………………… 1-12HHelp ……………………………………… 3-54How to operate menu by voice command … 1-8How to operate the screen menu ………… 1-7IImportant information ………………… 6-30Important information about this manual … 1-2Initializing Bluetooth handsfree ……… 6-29Initializing system ……………………… 3-37Inputting letter by using screen keyboard … 1-7Inserting a Disc ………………………… 2-13Inserting/Ejecting Disc ………………… 2-13Introduction ……………………………… 1-2iPod ……………………………………… 5-11iPod screen and functions ……………… 2-23iPod® …………………………………… 2-22LLandmark icons …………………………… 8-7Limitations of the navigation system …… 3-2Listening to CD music ………………… 2-14Listening to iPod music ………………… 2-22Listening to MP3 music ………………… 2-18Listening to the FM/AM radio …………… 2-2Listening to the XM radio ………………… 2-6Listening to USB music ………………… 2-28
8-10 APPENDIXINDEXMMain setting …………………………… 3-37Making a call …………………………… 6-11Making a call by dialing a phone number ………………………………… 6-11Making a call by redialing ……………… 6-12Making a call from Call history ………… 6-19Making a call from Speed Dial ………… 6-11Making a call from the Phone book …… 6-16Making a call to POI …………………… 3-10Map ……………………………………… 5-12Map Functions …………………………… 3-5Map legend ………………………………… 8-5Missed number ………………………… 6-20MP3 ……………………………………… 2-17MP3 ………………………………………… 5-9MP3 disc related information and precaution ……………………………… 2-17MP3 screen and functions ……………… 2-18My places setting ……………………… 3-43NNavigation setting ……………………… 3-38OOperating after setting a destination … 3-28Operating external devices …………… 2-22Operating menus during a call ………… 6-14Operating sequence of the PGS …………… 7-2Operating the CD Player ……………… 2-10Operating the radio ……………………… 2-2Operating typical screen menu …………… 1-7Operating USB IMAGE Mode …………… 2-31Operating Variable EQ ………………… 1-10Operating voice command ……………… 5-2Others …………………………………… 5-11Others …………………………………… 5-16PPairing a mobile phone …………………… 6-4Pairing and connecting a mobile phone …………………………………… 6-24Pairing and connecting a Bluetooth phone ……………………………………… 6-4Phone Book……………………………… 6-16Phone Music …………………………… 6-21Phone music screen layout …………… 6-22Playing AUX …………………………… 2-29POI Category list ………………………… 5-17POI icons …………………………………… 8-5Precaution for safe usage ………………… 1-2Precautions upon handling discs ……… 2-10Precautions upon handling USB ……… 2-26Previous destination …………………… 5-24Previous start point …………………… 5-25RReceived number ……………………… 6-20Registering avoid area ………………… 3-38Registering favorite place ……………… 3-49Registering home address ……………… 3-48Registering new address in addressbook …………………………………… 3-43Rejecting an incoming ………………… 6-13Re-ordering waypoints ………………… 3-34REW/FF CD track ………………………… 2-15REW/FF iPod song ……………………… 2-24REW/FF MP3 file ………………………… 2-20Road color ………………………………… 8-5Route …………………………………… 5-15Route Guidance …………………………… 3-4Route guidance ………………………… 3-30
APPENDIX 8-11APPEINDIXRoute guidance screen ………………… 3-28Route menu screen and functions ……… 3-30Route overview (View Entire Route) …… 3-31Route Re-calculation ……………………… 3-4SScanning CD track ……………………… 2-16Scanning FM/AM broadcast frequency …… 2-5Scanning MP3 file ……………………… 2-21Scanning XM broadcast channel ………… 2-9Scrolling map …………………………… 3-11Searching a Destination ………………… 3-13Searching a POI ………………………… 3-20Searching a Previous Destination ……… 3-17Searching an Address …………………… 3-13Searching an Intersection ……………… 3-17Searching and modifying my deviceproperties ……………………………… 6-27Searching by number …………………… 6-18Searching destination by voice command ……………………………… 5-19Searching favorite places ……………… 3-26Searching for Emergency facilities …… 3-25Searching from Address book ………… 3-24Searching from MAP …………………… 3-26Searching POI by local POI list ………… 3-26Searching the Phone Book ……………… 6-17Searching your Home …………………… 3-25Selecting an iPod song ………………… 2-23Selecting an item in a list ………………… 1-8Selecting FM/AM broadcast frequency …… 2-3Selecting other route …………………… 3-29Selecting Phone music files …………… 6-23Selecting the CD track ………………… 2-14Selecting to MP3 music ………………… 2-19Selecting XM broadcast channel ………… 2-7Setting a destination …………………… 3-12Setting arrival time and distance display …………………………………… 3-38Setting as Destination / waypoint ……… 3-27Setting Audio streaming ……………… 6-26Setting avoid streets on route ………… 3-35Setting detour distance ………………… 3-35Setting Display OFF …………………… 1-13Setting estimate travel time …………… 3-42Setting Handsfree volume ……………… 6-25Setting keyboard for inputting letter … 3-37Setting Language ……………………… 3-37Setting mobile phone auto connect priority ………………………… 6-24Setting Q.POI icons ……………………… 3-42Setting Random function for CD music … 2-15Setting Random function for iPod song … 2-25Setting Random function for MP3 file … 2-20Setting Repeat function for CD music … 2-15Setting Repeat function for iPod song … 2-25Setting Repeat function for MP3 file …… 2-20Setting the Clock ……………………… 1-12Setting units (mile/ km) ………………… 3-38Setting up the voice command system …… 5-4Setting voice command feedback ON/OFF ………………………………… 3-37Setting voice Prompt ON/OFF …………… 5-4Setup and Information ………………… 3-36Setup menu screen and functions ……… 3-36Sorting call history ……………………… 6-19Sorting items from list …………………… 1-8Sound setting ……………………………… 1-9Speaker adaptation ……………………… 5-4Sport Data Service Information …………… 4-3Starting navigation system ……………… 3-5Starting Phone Music …………………… 6-21
8-12 APPENDIXINDEXStarting Route Guidance ……………… 3-28Starting USB IMAGE Mode ……………… 2-30Steering wheel remote controller ………… 1-5Stock Data Service Information …………… 4-3Storing XM preset ………………………… 2-9Supported disc formats ………………… 2-11Switching call to the mobile phone …… 6-14Switching map mode (North Up / Heading Up) ………………… 3-6Switching the XM mode (Channel / Category) ……………………… 2-7System information and update ……… 3-51System Power ON ………………………… 1-6TTime Format …………………………… 1-12Touch screen beep ON/OFF …………… 1-10Traffic data Service Information …………… 4-2Traffic Information ……………………… 3-52Traffic Setup …………………………… 3-52Troubleshooting …………………………… 8-3Troubleshooting guide …………………… 8-2Turning the Audio ON/OFF ……………… 1-6Turning the Power OFF …………………… 1-6Turning the Power ON …………………… 1-6UUSB ……………………………………… 5-10USB IMAGE Mode ……………………… 2-30USB IMAGE mode menu screen configuration …………………………… 2-30USB MP3 ………………………………… 2-26USB MP3 related information and precaution ……………………………… 2-26VVariable EQ Setup (Optional) …………… 1-10Vehicle position display …………………… 3-3Viewing Current Time …………………… 1-12Viewing detail information for MP3 file … 2-20Viewing GPS signal state ………………… 3-7Voice command Help ……………………… 5-3Voice command list ……………………… 5-6Voice guidance volume control ………… 3-51Voice guidance volume setting ………… 3-51WWeather data Service Information ………… 4-4What is Bluetooth? ………………………… 6-2When a mobile phone is connected ……… 6-9When already on a call ………………… 6-10When receiving an incoming call ……… 6-10When there is a call waiting …………… 6-10When there is no mobile phone connected ………………………………… 6-9XXM Data mode …………………………… 4-2XM Data mode screen and functions …… 4-2XM radio …………………………………… 2-6XM Radio …………………………………… 5-7XM screen and functions ………………… 2-6
MSMicrosoft® Windows® Automotive Operating SystemImportant Safety InformationRead and Follow InstructionsBefore using your Windows Automotive-based system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.Keep User's Guide in VehicleWhen kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based sys-tem. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully.Warning:Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions you might be required to distract your attention away from the road and remove your hands from the wheel.General OperationVoice Command ControlFunctions within the Windows Automotive-based system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel.
Prolonged Views of ScreenDo not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.Volume SettingDo not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.Navigation FeaturesAny navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully.Distraction HazardSome navigation features may require manual (non-verbal) setup. Attempting to perform such set-up or insert data while driving can seriously distract your attention and could cause an accident or other serious consequences. Stop the vehicle in a safe and legal manner before attempting these operations.Let Your Judgment PrevailAny navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing tra-ffic regulations. Any such feature is not a substitute for your personal judgment. Any route suggestions made by this system should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.MS
Route SafetyDo not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe. The driver is ultimately responsible for the safe operation of the vehicle and therefo-re, must evaluate whether it is safe to follow the suggested directions.Potential Map InaccuracyMaps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes.Emergency ServicesDo not rely on any navigation features included in the system to route you to emergency services. Ask local authorities or an emergency services operator for these locations. Not all emergency services such as police, fire stations, hospitals and clinics are contained in the map database for navigation features.Use of Speech Recognition FunctionsSpeech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors.
M & SOFT AMERICA MAP CENTERTEL : 888-757-0010WEBSITE : www.mapnsoft.comMAP DATABASE HOTLINE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ˍ Reorient or relocate the receiving antenna. ˍ Increase the separation between the equipment and receiver. ˍ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ˍ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu