HYUNDAI MOBIS PA710SLUSB CAR AUDIO BLUETOOTH User Manual PA710SLUSB IC ATT E

Download:
Mirror Download [FCC.gov]
Document ID	1245664
Application ID	6JtH1BYX3m4MnChO9shZQA==
Document Description	user manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	313.71kB (3921437 bits)
Date Submitted	2010-02-25 00:00:00
Date Available	2010-04-11 00:00:00
Creation Date	2010-02-25 14:09:14
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-02-25 14:09:27
Document Title	PA710SLUSB_IC_ATT.E User Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Owner

FCC ID: TQ8-PA710SLUSB/ IC: 5074A-PA710SLUSB
ATTACHMENT E.
- User Manual -
HCT CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:+82 31 639 8517
FAX:+82 31 639 8525
www.hct.co.kr
Report No. :
HCTR1002FR01
1/1
Preface
Thank you for purchasing this
Audio Navigation System.
This user manual explains how to
use the KIA Motor Audio Navigation
System.
Before using the product, read the
contents of this user's manual carefully and use the product safely.
iPod
iPod is a registered trademark of
Apple, Inc.
Bluetooth
Bluetooth is a trademark owned
by Bluetooth SIG, Inc.
The screens shown in this manual may differ with the actual
screens of the product.
The design and specification of
this product may change without
prior notification for product
improvement.
When transferring the vehicle to
another individual, include this
user's manual so that the next
driver can continue its use.
Copyright(c) 2010 by NAVTEQ. All Map Database cannot be copied without permission.
This is protected by U.S. copyright laws. All rights not expressly granted are reserved.
You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.
Tables of contents
PART 1
PRE-OVERVIEW
Introduction
PART 2
AUDIO SYSTEM
1-2
Important information about this
manual
1-2
Precaution for safe usage
1-2
PART 3
NAVIGATION SYSTEM
Operating the radio
2-2
FM/AM Radio
2-2
SIRIUS Radio
2-6
Operating the CDP
2-11
Controller and functions
1-3
About CDP
2-11
Control panel
1-3
Inserting/Ejecting Disc
2-14
Steering wheel remote controller
1-6
CD
2-15
MP3
2-18
Basic operation and setting
1-7
Turning the power ON
1-7
Operating the external devices
Turning the power OFF
1-7
iPod
2-23
Turning the audio ON/OFF
1-7
USB
2-28
Adjusting audio volume
1-7
AUX
2-31
How to operate the screen menu
1-8
How to operate menu by
voice command
1-10
Audio sound setting
Display setting
1-11
1-12
2-23
Limitations of the navigation
system
3-2
GPS signal reception state
Vehicle position display
Route guidance
Route Re-calculation
3-2
3-3
3-4
3-4
Starting navigation system
3-5
Map Functions
3-5
Current position map screen
(without route)
3-5
Switching map mode
(North up/Heading up)
Viewing GPS signal state
Changing the map scale
3-6
3-7
3-8
Displaying / Hiding POI icons
on the map
Displaying / Hiding Q.POI icons
3-9
3-9
Displaying /Hiding icons other than
Q.POI icons
3-9
Making a call to POI
3-10
Scrolling map
3-11
Tables of contents
Setting a Destination
Destination menu screen and functions
Searching a Destination
Searching an Address
Searching a Previous Destination
Searching an Intersection
Searching a POI
Searching from Address book
Searching for Emergency facilities
Searching your Home
Searching favorite places
Searching from MAP
Searching POI by local POI list
Operating after searching a
destination
Changing destination position
Setting as Destination/waypoint
Adding to address book
Operating after setting
a destination
Starting Route Guidance
Route guidance screen
Selecting other route
3-12
3-12
3-13
3-13
3-17
3-17
3-20
3-24
3-25
3-25
3-26
3-26
3-26
Route guidance
3-30
Finishing route guidance
(Delete Destination)
Route overview(View Entire Route)
Changing Route option
Editing waypoints
Adding waypoints
Deleting waypoints
Re-ordering waypoints
Setting detour distance
Setting avoid streets on route
3-30
3-31
3-32
3-32
3-32
3-34
3-34
3-35
3-35
Setup and Information
3-27
3-27
3-27
3-27
3-28
3-28
3-28
3-29
3-30
Route menu screen and functions
Setup menu screen and functions
Main setting
3-36
3-36
3-36
Setting keyboard for inputting
letter
3-36
Setting voice command feedback
ON/OFF
Setting Language
Initializing system
Navigation setting
Setting units (mile/km)
3-37
3-37
3-37
3-38
3-38
Setting arrival time and distance
display
3-38
Registering avoid area
Editing avoid area
Deleting avoid area
Deleting all avoid areas
Setting Q.POI icons
Setting estimate travel time
My places setting
3-38
3-40
3-41
3-41
3-42
3-42
3-43
Registering new address in
address book
3-43
Editing an address of
address book
3-45
Deleting an address of address
book
Deleting an address book
Registering home address
Deleting home address
Registering favorite place
Deleting favorite place
System information and update
Voice guidance volume setting
Voice guidance volume control
Adaptive volume control ON/OFF
Traffic Setup
Traffic Information
Help
3-46
3-47
3-48
3-48
3-49
3-50
3-51
3-51
3-51
3-52
3-52
3-52
3-54
Operating voice command
4-2
Condition for voice command system
4-2
PART 5
BLUETOOTH HANDSFREE
Before using the Bluetooth
Handsfree
What is Bluetooth?
Basic operation for voice
command control
4-2
Voice command help
4-3
Functions supported by Bluetooth
Handsfree
5-2
5-2
5-2
Converting Bluetooth Handsfree
mode
Setting voice Prompt ON/OFF
4-4
Speaker adaptation
4-4
Converting from AV/Navigation mode to
Bluetooth Handsfree mode
5-2
Voice command list
4-6
Converting from Bluetooth Handsfree mode
to AV/Navigation mode
5-3
Command list of Help
4-6
Command list of Audio system
4-7
Command list of Navigation system
4-13
4-19
5-9
Bluetooth Handsfree screen and
functions
5-9
When there is no mobile phone
connected
When a mobile phone is connected
Setting up the voice command
system
4-4
Searching a destination by
voice command
Bluetooth Handsfree screen
layout
5-9
5-9
When receiving an incoming call
5-10
When already on a call
5-10
When there is a call waiting
5-10
5-2
Making a call
5-11
Making a call by dialing a phone
number
5-11
Making a call from Speed Dial
5-11
Making a call by redialing
5-12
Pairing and connecting a Bluetooth
phone
5-4
Answering a call
Pairing a mobile phone
5-4
Answering an incoming call
5-13
Deleting a paired phone
5-6
Rejecting an incoming call
5-13
Connecting a mobile phone
5-7
Disconnecting a mobile phone
5-8
5-13
Operating menus during a call
5-14
Switching call to the mobile phone
5-14
Activating Call waiting
5-14
Ending a call
5-15
PRE-OVERVIEW
PART 4
VOICE COMMAND SYSTEM
Tables of contents
Phone Book
5-16
Changing passkey
5-28
DVD
6-15
AUX (auxiliary device input)
6-19
Making a call from the Phone book
5-16
Deleting all paired phones
5-28
Searching the Phone Book
5-17
Initializing Bluetooth handsfree
5-29
Searching by name
5-17
Searching by number
5-18
Important information
About pairing mobile phones
Call History List
5-19
Making a call from Call history
5-19
Sorting call history
5-19
5-30
5-30
About making/answering phone calls
5-31
About Bluetooth device environment
5-31
Phone Music
5-21
Before playing Phone Music
5-21
Starting Phone Music
5-21
Phone Music screen layout
5-22
Selecting Phone Music files
5-23
Bluetooth settings
5-24
Pairing and connecting a mobile phone
5-24
Setting mobile phone auto connect
priority
5-24
Setting Handsfree volume
7-2
Before thinking the product has
malfunctioned
Troubleshooting
7-2
7-3
DVD region code and language
code
7-6
Region code
Language code
7-6
7-7
REAR SEAT ENTERTAINMENT
SYSTEM (RSE) (IF EQUIPPED)
Map legend
7-8
Road color
POI icons
Landmark icons
7-8
7-9
7-11
6-2
6-2
Product Characteristics
6-3
Name and function of system parts
6-4
5-25
Operating the Rear (RSE) System
6-7
Setting Audio streaming
5-26
DVDP/AUX
6-9
Advanced settings
5-26
CD
5-27
Troubleshooting guide
PART 6
REAR SEAT ENTERTAINMENT
SYSTEM (RSE)
Important Safety Information
Searching and modifying
my device properties
PART 7
APPENDIX
6-9
MP3
6-11
VCD
6-13
INDEX
7-12
RSE Connector Pin Layoutout
7-17
PART 1 PRE-OVERVIEW
Introduction
1-2
Important information about this
manual
Precaution for safe usage
How to operate a menu by
voice command
1-10
1-2
1-2
Controller and functions
1-3
Control panel
Steering wheel remote controller
1-3
1-6
Basic operation and setting
1-7
Turning the power ON
Turning the power OFF
Turning the audio ON/OFF
Adjusting audio volume
How to operate the screen menu
Operating typical screen menu
1-7
1-7
1-7
1-8
1-8
1-8
Condition for voice recognition
system
Giving voice command
Audio sound setting
FAD/BAL
BASS/MID/TREB
Auto volume control ON/OFF
Touch screen beep ON/OFF
Display setting
Display mode
Brightness
Display OFF
Display ON
1-10
1-10
1-11
1-11
1-11
1-11
1-11
1-12
1-12
1-12
1-12
1-12
Inputting letters by using screen
keyboard
Displaying the list
Selecting an item in a list
Sorting items from the list
1-8
1-9
1-9
1-9
PRE-OVERVIEW 1-1
PRE-OVERVIEW
PART 1
PRE-OVERVIEW
Controller and functions
Power / Volume control knob
Control panel
power off.
Push knob (under 0.8 second) : Each time
the knob is pressed, the Audio is turned
on and off.
Tune knob : The range of volume
adjustment is between 0 ~ 35.
FM/AM button
Each press will change the bands in the
following order: FM1
FM2
AM
FM1
SAT button
Each press will change the bands in the
following order : SIRIUS1
SIRIUS3
SIRIUS2
SIRIUS1
CD/AUX button
Each press will change the bands in the
following order : DISC(CD, MP3)
iPod)
(AUX)
(USB or
DISC(CD, MP3)
PRE-OVERVIEW 1-3
PRE-OVERVIEW
Push knob (over 0.8 second) : Turns the
PART 1 PRE-OVERVIEW
SEEK/TRACK Up/Down button
SHORT KEY(less than 0.8 second)
- iPod Mode : REW/FF the current playing
song.
DEST button
Displays the Destination menu screen.
- FM/AM Mode : Automatically searches
for the previous or next broadcast
frequency and starts playing.
- SAT Mode : Receives the previous or
next channel.
- CD Mode : Plays the previous or next
track.
- MP3, USB Mode : Plays the previous or
next file.
- iPod Mode : Plays the previous or next
song.
LONG KEY(over 0.8 second)
- FM/AM Mode : Quickly moves through
the frequencies while the button is
TUNE knob
- FM/AM Mode : Turn the knob to search
for the desired frequency. Press the
knob to receive the selected frequency.
- SAT Mode : Turn the knob to search for
receive the selected channel.
- CD Mode : Turn the knob to search for
the desired track. Press the knob to play
the selected track.
- MP3, USB Mode : Turn the knob to
search for the desired file. Press the
knob to play the selected file.
- iPod Mode : Turn the knob to search for
searches for broadcasts which can be
the desired song. Press the knob to play
received.
the selected song.
- SAT Mode : Quickly moves to the
- CD Mode : REW/FF the current playing
track.
- MP3, USB Mode : REW/FF the current
playing file.
1-4 PRE-OVERVIEW
SETUP button
Displays the Setup menu screen.
the desired channel. Press the knob to
pressed. Once released, automatically
previous or next channel.
ROUTE button
Displays the Route menu screen.
MAP button
Displays the map screen for the current
position.
DISC Eject button
Eject the inserted disc.
DISC insert indicator LED
PRE-OVERVIEW
Displays that a DISC has been inserted.
RESET button
Resets the system - if software locks-up.
PHONE button
Displays the Bluetooth handsfree screen.
INFORMATION
If pressing the power off knob for over 0.8
second and the system does not shut down,
carefully use a straightened paper clip at the
access hole shown next to the right DISC
indicator LED to reset the software.
The system power will shut-off and restart.
PRE-OVERVIEW 1-5
PART 1 PRE-OVERVIEW
Steering wheel remote controller
and automatically switch to the next mode.
Press this button for over 0.8 second to turn
the Audio ON and OFF.
Press this button when the Power is turned
off to turn the power on.
- CD Mode : REW/FF the current playing
track.
- MP3, USB Mode : REW/FF the current
playing file.
- iPod Mode : REW/FF the current playing
song.
Seek Up/ Down
SHORT KEY(less than 0.8 second)
- FM/AM : Receives the previous or next
preset frequency.
Volume Up/Down
Increases or decreases the speaker volume
within a range between 0 ~ 35.
- SIRIUS Mode : Receives the previous or
next preset channel.
- CD Mode : Plays the previous or next track.
Voice Recognition button
Starts Voice Recognition.
- MP3, USB Mode : Plays the previous or
next file.
- iPod Mode : Plays the previous or next
song.
Mode
mode will convert in the following order:
LONG KEY(Over 0.8 second)
FM1
- FM/AM Mode : Quickly moves through the
SIRIUS3
AM
(DISC)
(Phone Music)
SIRIUS1
(USB or iPod)
SIRIUS2
(AUX)
(FM1).
If a not supported DISC has been inserted or
if the corresponding unit has not been
connected, the mode will not be recognized
1-6 PRE-OVERVIEW
pressed while in AV/Navigation mode, the
Bluetooth handsfree screen will be displayed.
Each time the mode button is pressed, the
FM2
CALL
Press this key to receive an incoming call. If
END
frequencies while the button is pressed.
Press this key to reject an incoming call.
Once released, it automatically searches
If pressed while on a call, then the call will be
for broadcasts which can be received.
ended.
- SIRIUS Mode : Quickly moves to the
previous or next channel.
Basic operation and setting
Turning the power OFF
Turning the power ON
second, a beep will sound and the system
power will be turned off.
Turn the ignition key onto ACC or ON. If the
Turning the audio ON/OFF
system power had been on when the
Press the PWR/VOL knob for under 0.8
ignition was turned off, the system will turn
back on automatically.
second with the system power on to turn the
INFORMATION
If the system power had been off when the
As system booting starts from the point the
ignition was turned off, the system will
door lock is unlocked, the device may
remain off.
In this case, press the PWR/VOL knob to
complete booting before the ACC is turned
on or the PWR/VOL knob is pressed.
Audio on and off.
Voice Command
1. Press the
button on the steering
wheel remote controller.
2. After the beep sound, say a command.
turn on the system power.
Once system booting is complete, the most
recent operated mode will be displayed.
"Audio On"
"Audio Off"
For example, turning on the system will
display FM1 radio mode if the last operated
mode prior to turning off the system had
been FM1 radio mode.
PRE-OVERVIEW 1-7
PRE-OVERVIEW
If the PWR/VOL knob is pressed for over 0.8
PART 1 PRE-OVERVIEW
INFORMATION
How to operate the screen menu
Conducting the following operations while
the AUDIO is off will automatically turn on the
Inputting letters by using screen
keyboard
Operating typical screen menu
Audio system.
Pressing the audio related buttons ( FM/AM
, SAT , CD/AUX ).
If a menu button on the screen is pressed,
Inserting a DISC or connecting an external
different functions depending on the length
device.
of time the button is pressed (under 0.8
the corresponding function will be operated.
The same menu button may perform
seconds or over 0.8 second).
Adjusting audio volume
For more information, refer to the specific
Turn the PWR/VOL knob in clockwise direction
function within this user manual.
to increase the volume and counter-clockwise
The current operated button will be
to decrease the volume.
highlighted upon display.
Buttons which cannot be operated under
INFORMATION
disabled state. Pressing a disabled button
between 0 ~ 35.
will not perform any operation.
made while the AUDIO is turned off.
: Displays the French alphabet keypad. (if
available)
: Displays the number and symbol
0-9
the current conditions will be displayed in
The range of volume adjustment is
Adjustments to the volume cannot be
: Displays the English alphabet keypad.
ABC
Delete
keypad.
: Deletes the previous inputted letter.
Pressing for over 0.8 second will delete
all content.
: The input is completed.
: Restores to previous screen.
List
The inputted text will not be saved.
1-8 PRE-OVERVIEW
Displaying the list
Selecting an item in a list
Sorting items from the list
PRE-OVERVIEW
List
: Even if input is not completed, the
current matching items from the
database will be displayed.
: Moves to the next page or previous
Select the desired sorting method to
page.
: The
reorganize the list in accordance to the
button will be displayed if
selected method.
the text is too long to be displayed
INFORMATION
The number at the upper-right side of the
screen displays the number of current
matches.
in one button.
Press the
button to move the cursor to
the end of the text.
Press the
button to move the cursor to
the front of the text.
PRE-OVERVIEW 1-9
PART 1 PRE-OVERVIEW
How to operate menu by voice
command
Giving voice command
INFORMATION
Press the
shortly to input the desired
voice command. The system voice instruction
Condition for voice recognition
system
comment will immediately terminate. When
the
icon changes into the
icon
Most of the functions within the AV and
with a beep sound, it is possible to input voice
Navigation system can be operated by
commands.
voice.
Please follow the instructions below for
optimal voice recognition performance.
Press the
button on the steering
Close all windows and sunroof.
wheel remote controller.
The performance of the voice recognition
A voice command window will be
can be improved in quiet environment.
displayed on the lower side of the screen
Press the voice recognition button and
followed by a "Command please" voice
comment.
say the desired voice command after
the sound of the beep.
The microphone is positioned above the
driver so that voice commands can be
Once the
icon changes into the
icon on the pop-up screen with a
said while maintaining a proper posture.
beep sound, say the desired voice
Pronounce the voice commands
command.
naturally and clearly as if in normal
[Voice command list], page 4-6.
conversation.
[Searching a destination by voice
command], page 4-20.
1-10 PRE-OVERVIEW
Audio sound setting
Auto volume control ON/OFF
button on the main screen
Each time the Auto volume control button is
of each AV mode (FM/AM, SIRIUS, CD, MP3,
pressed, the Auto volume control function is
USB, iPod, and AUX) to display the Audio
turned on or off.
PRE-OVERVIEW
Press the
Sound
sound setup screen.
INFORMATION
The Auto volume control is a function which
automatically adjusts the volume level in
accordance to changes in vehicle speed.
Touch screen Beep ON/OFF
Each time the Touch screen beep button is
pressed, the beeping sound that follows each
press on the screen will turn on or off.
FAD/BAL
The position of the sound can be adjusted by
using the up-down and left-right (
) buttons on the left side of the screen.
Press the Default button to position the
sound in the center of the vehicle.
BASS/MID/TREB
The BASS/MID/TREB can be adjusted by using
the left/right buttons (
) of each
control.
PRE-OVERVIEW 1-11
PART 1 PRE-OVERVIEW
Display setting
Press the SETUP button on the control panel
to display the Setup menu screen.
Display mode
Display OFF
Press the button for the desired display mode
from Automatic , Daylight , and Night
modes. The current selected mode is
highlighted.
Press the Display off button.
Display ON
Press anywhere on the black screen.
The screen prior to display setting will be
Automatic
displayed.
The display is automatically converted
between Daylight and Night modes in
accordance to the on/off state of the vehicle
taillights.
Press
Display
button to display the Display
Setup screen.
Daylight
The bright screen is always maintained
regardless of the on/off state of the vehicle
taillights.
Night
The dark screen is always maintained
regardless of the on/off state of the vehicle
taillights.
Brightness
Use the left/right buttons (
control to make adjustments.
1-12 PRE-OVERVIEW
) for
MEMO
PRE-OVERVIEW
PART 2 AUDIO SYSTEM
PART 2
AUDIO SYSTEM
Operating the radio
2-2
Operating the CDP
FM/AM Radio
Listening to the FM/AM radio
FM/AM screen and functions
2-2
2-2
2-2
Selecting FM/AM broadcast
frequency
Storing FM/AM presets
2-4
2-5
Scanning FM/AM broadcast
frequency
SIRIUS Radio
Listening to the SIRIUS radio
SIRIUS screen and functions
2-5
2-6
2-6
2-6
About CDP
Precautions upon handling discs
For safe and efficient operation
Supported disc formats
Disc/Content format compatibility
Inserting/Ejecting disc
CD
Listening to CD music
CD screen and functions
Selecting the CD track
REW/FF CD track
2-11
2-11
2-11
2-12
2-13
2-14
2-15
2-15
2-15
2-16
2-16
Switching the SIRIUS modes
(Channel/Category)
2-7
Setting Random function for
CD music
2-16
Selecting SIRIUS broadcast
channel
2-7
Storing SIRIUS presets
2-9
Scanning SIRIUS broadcast channel 2-10
Browsing detailed information
about the SIRIUS channel
2-10
Setting Repeat function for
CD music
Scanning CD track
MP3
MP3 disc related information and
precaution
Listening to MP3 music
MP3 screen and functions
Selecting the MP3 file
2-11
2-17
2-17
2-18
2-18
2-19
2-19
2-20
REW/FF MP3 file
2-21
Browsing detailed information
about the MP3 file
2-21
Setting Random function for
MP3 file
2-21
Setting Repeat function for
MP3 file
Scanning MP3 file
2-22
2-22
PART 2
AUDIO SYSTEM
2-23
iPod
Connecting iPod devices
Listening to music from iPod
iPod screen and functions
Selecting music from iPod
REW/FF iPod music
2-23
2-23
2-23
2-24
2-25
2-26
Setting Random function for
iPod music
2-26
Setting Repeat function for
iPod music
2-27
Browsing detailed information
about the iPod music
2-27
USB
USB MP3 related information and
precaution
Precautions upon handling USB
Connecting the USB devices
Listening to USB music
AUX
Connecting AUX
Playing AUX
AUX screen
AUDIO SYSTEM
Operating the external devices
2-31
2-31
2-31
2-32
2-28
2-28
2-28
2-30
2-30
AUDIO SYSTEM 2-1
PART 2 AUDIO SYSTEM
Operating the radio
Voice Command
1. Press the
FM/AM Radio
FM/AM screen and functions
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
Listening to the FM/AM radio
" Radio"
"(Radio) AM"
"(Radio) FM"
"FM <1 or 2>"
"AM Frequency <530 to 1710>"
"FM Frequency <87.5 to 107.9>"
"AM Preset <1 to 6>"
"FM <1 or 2> Preset <1 to 6>"
Press the FM/AM button on the control
panel. The FM/AM radio band of the most
recent listened station will be displayed.
Press the FM/AM button to change the
desired radio band. Each press will
Mode display : Displays the FM1/FM2/
change the bands in the following order:
AM modes.
FM1
SEEK/SCAN/PRESET SCAN : If SEEK/SCAN
FM2
AM
FM1
Select the desired broadcast frequency.
[Selecting FM/AM broadcast frequency],
/PRESET SCAN is operating, the switch is
page 2-5.
Frequency : Displays the current playing
displayed.
frequency.
2-2 AUDIO SYSTEM
STEREO indicator : If the current
LONG KEY(over 0.8 second)
frequency is a stereo broadcast, the
- The frequency is rapidly increased or
INFORMATION
If the
R.Text
is on OFF state, text will not be
decreased by 1-step increments (FM :
displayed even if there is text being
Program Service name: Displays the
0.2MHz, AM : 10kHz) and stops operation
program service name if data is being
upon KEY RELEASE.
transmitted from the broadcast station.
If the R.Text is on ON state, the frequency
bar will not be displayed. Even if the
broadcasted.
SEEK Up/Down button
Program Type name: Displays the
R.Text
is on ON state, text may not be displayed if
program type name if data is being
SHORT KEY(less than 0.8 second)
text is not being received from the broadcast
broadcasted.
- Automatically searches for the previous
station.
Frequency bar : Displays the position of
the current frequency within the total
or next broadcast frequency and starts
Scan
playing.
button : Scans all frequencies or
frequency range.
LONG KEY(over 0.8 second)
just the preset frequencies for 5 seconds
Radio Text: Displays the radio text
- Quickly moves through the frequencies
information if data is being broadcasted.
while the button is pressed. Once
each.
[Scanning FM/AM broadcast frequency],
released, it automatically searches for
page 2-5.
button : Changes the desired
BAND
broadcasts which can be received.
radio band. Each press will change the
Preset buttons : The desired frequency
bands in the following order: FM1
can be preset and selected.
[Storing FM/AM presets], page 2-5.
FM2
FM1
R.Text
TUNE Up/Down button
Sound
button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Audio sound setting], page 1-11.
button : Turns the Radio Text
information on and off.
SHORT KEY(less than 0.8 second)
- The frequency is increased or decreased
by 1-step increments (FM : 0.2MHz, AM :
10kHz).
AUDIO SYSTEM 2-3
Operating the radio
indicator is displayed
PART 2 AUDIO SYSTEM
Selecting FM/AM broadcast
frequency
There are 3 ways to select the broadcast
frequency - (a) selecting through presets,
Voice Command
1. Press the
than 0.8 second to quickly move to the
button on the steering wheel
nearest desired frequency. Once the button
is released, the next frequency with superior
remote controller.
2. After the beep sound, say a command.
reception will be searched automatically.
(b) selecting through SEEK, (c) selecting
"Preset <1 to 6>"
through manual search.
"Preset Up"
While the SEEK function is operating, pressing
the SEEK
or TRACK
buttons on the
"Preset Down"
control panel again will terminate SEEK
operation and select the current frequency.
(a) Selecting a frequency through presets
Press the preset button of the desired
(b) Selecting a Broadcast frequency
broadcast frequency.
through SEEK
Press the SEEK
or TRACK
INFORMATION
Press the SEEK
or SEEK
the control panel or the
Voice Command
buttons on
or
1. Press the
button on the steering wheel
remote controller.
buttons for a
buttons on FM1, FM2, and AM mode
short time on the steering wheel remote
screens for less than 0.8 second. Once the
"Seek Up"
controller.
SEEK function is operating (SEEK indicator
"Seek Down"
The preset frequencies of the current band
blinking), the next or previous broadcast
will be selected in order.
frequency with superior reception will be
(c) Selecting a broadcast frequency through
There are 6 different preset frequencies
searched automatically.
manual search
Press the
or
each for FM1, FM2, and AM modes.
[Storing FM/AM preset], page 2-5.
INFORMATION
Press the SEEK
or TRACK
the control panel or the SEEK
2-4 AUDIO SYSTEM
2. After the beep sound, say a command.
TUNE
buttons on
or SEEK
buttons or turn the
knob on the control panel in
clockwise or counter-clockwise direction.
Each click on the tune knob or the
or
buttons will increase or decrease the
buttons on the steering wheel remote
controller or the
or
buttons on
frequency by 1 step (FM: 0.2 MHz, AM: 10
FM1, FM2, and AM mode screens for more
kHz).
Storing FM/AM presets
Voice Command
1. Press the
button on the steering wheel
page 2-4.
2. After the beep sound, say a command.
INFORMATION
When scanning has completed an entire
revolution, the scan function will be terminated
remote controller.
Press the preset button to store for over
"Scan"
0.8 second. The frequency will become
PRESET SCAN (over 0.8 second): Scans the
stored along with a beep sound.
6 frequencies stored as preset frequencies
automatically and the previous played
frequency will be restored.
in the current band for 5 seconds each.
INFORMATION
Six preset frequencies each for FM1/FM2/AM
modes can be stored using the above
instructions.
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Preset Scan"
Scanning FM/AM broadcast
frequency
Press the
Scan
button.
Press the
Scan
button again to
continue listening to a frequency.
SCAN (less than 0.8 second) : Scans all
The scan will be terminated and the
frequencies and plays only frequencies
current frequency will continue to be
with superior reception for 5 seconds each.
played.
AUDIO SYSTEM 2-5
Operating the radio
Select the desired frequency.
[Selecting FM/AM broadcast frequency],
PART 2 AUDIO SYSTEM
SIRIUS radio
Voice Command
1. Press the
Listening to the SIRIUS radio
SIRIUS screen and functions
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"SIRIUS"
"SIRIUS <1 or 2 or 3>"
"SIRIUS Channel <0 to 223>"
"SIRIUS <1 or 2 or 3> Preset <1 to 6>"
Mode display: Displays the SIRIUS1/
SIRIUS2/SIRIUS 3 modes.
Press the
SAT
button on the control
Channel number: Displays the current
panel. The Sirius radio band screen of the
playing channel.
most recent listened station will be
SCAN/PRESET SCAN indicator: If SCAN/
displayed.
Press the SAT
PRESET SCAN is operating, the switch is
button to change the
displayed.
desired radio band. Each press will
Category name: Displays the category
change the bands in the following order:
name.
SIRIUS1
Channel name: Displays the channel
SIRIUS2
SIRIUS3
SIRIUS1
Select the desired broadcast channel.
[Selecting SIRIUS broadcast channel],
name.
page 2-7.
program title.
Song/Program title: Display the song or
Artist name: Displays the artist or other
related information.
2-6 AUDIO SYSTEM
i
INFORMATION
Selecting SIRIUS broadcast channel
category list.
[Selecting SIRIUS broadcast channel],
There are 5 ways to select a broadcast
page 2-7.
Scan button: Scans all frequencies or
selecting with channel Up/Down, (c)
button : Switches between
just the preset frequencies for 5 seconds
(d) selecting through channel/category list,
channel mode and category mode.
[Switching the SIRIUS modes], page 2-7.
each.
[Scanning SIRIUS broadcast channel],
(e) selecting by directly inputting the
The Song title display may be delayed in
accordance to the reception quality of the
Sirius broadcast.
CAT
: Moves to the next or
previous category, and automatically
plays the first channel within the
selected category.
: Moves to the next or previous
page 2-10.
Sound button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Audio sound setting], page 1-11.
Selecting a channel through manual search,
channel number.
(a) Selecting a channel through presets
Press the preset button of the desired
channel.
channel.
Preset
channel - (a) selecting through presets, (b)
buttons : The desired channel
can be preset and selected.
[Storing SIRIUS presets], page 2-9.
Info.
button : Displays the Title,
Switching the SIRIUS modes
(Channel / Category)
Each time the
CAT
button is pressed,
INFORMATION
Press the SEEK
or SEEK
buttons on
the steering wheel remote controller for less
than 0.8 second.
the mode will switch between channel
The preset channels of the current band will
Artist, Composer, and other information
mode and category mode.
be selected in order.
for the current received channel if the
Category mode will begin operating when
There are 6 preset channels each for
information exists.
Search button: Selects the channel by
the orange light is turned ON.
SIRIUS1, SIRIUS2, and SIRIUS3.
[Storing SIRIUS presets], page 2-9.
directly inputting the channel number.
[Selecting SIRIUS broadcast channel],
page 2-7.
AUDIO SYSTEM 2-7
Operating the radio
button: Displays the channel or
List
PART 2 AUDIO SYSTEM
Voice Command
1. Press the
button on the steering wheel
remote controller.
than 0.8 second to quickly move to the
Press the TUNE knob at the desired
nearest desired channel. Once the button is
channel. The selected channel will begin
released, the current channel will be selected.
playing.
2. After the beep sound, say a command.
Voice Command
"Preset <1 to 6>"
1. Press the
"Preset Up"
"Preset Down"
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
(b) Selecting with Channel Up/Down
Press the SEEK
or TRACK
buttons on
the control panel or the
or
"Channel Up"
category list
List
Press the
button.
If in channel mode, the Channel list
screen will be displayed.
"Channel Down"
buttons on
SIRIUS1, SIRIUS2, or SIRIUS3 mode screens
(c) Selecting a channel through manual
search
Turn the TUNE knob on the control
for less than 0.8 second.
The previous or next channel will be selected.
(d) Selecting channel through channel/
panel in clockwise or counterclockwise
direction. Each click on the TUNE knob
INFORMATION
If in Channel mode, the channel is selected
will display the channel information of
from all channels. If in Category mode, the
the previous or next channel. The
previous or next channel of each category is
current playing channel will continue to
screen will be displayed.
selected.
Press the SEEK
be played.
Select the desired category button to
or TRACK
the control panel or the SEEK
buttons on
or SEEK
display the channel list screen for the
INFORMATION
buttons on the steering wheel remote
controller or the
or
buttons on SIRIUS1,
If in Channel mode, the channel is selected
SIRIUS2, and SIRIUS3 mode screens for more
first channel of each category is selected.
2-8 AUDIO SYSTEM
If in category mode, the Category list
from all channels. If in Category mode, the
corresponding category.
Storing SIRIUS presets
Input desired channel number, and press
the Done button.
Select the desired channel.
[Selecting SIRIUS broadcast channel],
the selected channel will begin playing.
page 2-7.
INFORMATION
Press the preset button for over 0.8
To prevent inputting a channel which exceeds
second.
Select the desired channel button.
the channel range, numbers which cannot be
The frequency will be saved along with
The previous screen will be restored and
inputted are set to disabled state.
beep sound.
the selected channel will begin playing.
Voice Command
(e) Selecting channel by directly inputting
the channel number
Press the Search button.
The Channel search screen will be
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
INFORMATION
Six preset frequencies each for SIRIUS1/
SIRIUS2/ SIRIUS3 modes can be stored using
the above instructions.
"Channel<0 to 223>"
displayed.
AUDIO SYSTEM 2-9
Operating the radio
The previous screen will be restored and
PART 2 AUDIO SYSTEM
Press the
Scanning SIRIUS broadcast channel
Press the
Scan
button.
Scan
button again to
continue playing the channel.
Browsing detailed information
about the SIRIUS channel
SCAN (under 0.8 second): Scans all
The scan will be terminated and the
Press the
channels for 5 seconds each if in channel
current channel will continue to play.
The detailed information (Title, Artist and
mode. If in category mode, scans all
Info.
button.
Composer) for the current channel will be
channels within the current category for 5
seconds each.
Within the Channel list screen, if the
INFORMATION
displayed.
button next to each channel name is
Voice Command
1. Press the
button on the steering wheel
pressed, the selected channel will be
excluded from SCAN operation.
remote controller.
2. After the beep sound, say a command.
"Scan"
PRESET SCAN (over 0.8 second): Scans the
Press the
6 preset channels within the current band
The detailed information will be turned
for 5 seconds each.
off.
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Preset Scan"
When scanning has completed an entire
revolution, the scan function is automatically
terminated and the previous played channel
will be restored.
Channel 0 is the radio ID and contains
information required for SIRIUS activation.
2-10 AUDIO SYSTEM
OK
button.
Operating the CDP
Be cautious not to introduce foreign
disc or write on disc surfaces. Sharp
substances into the disc insert slot.
writing utensils and inks used in felt-tip
Foreign substances may cause damage
pens may cause damage to disc surfaces
to the interior of the device.
Clean fingerprints and dust off the signal
The device may fail to operate properly in
surface (coated side) of the disc with a
extremely hot or cold temperatures.
After using a disc, keep it in the original
soft cloth.
Discontinue the use of the device unless
case to prevent it from becoming
Only soft cloths should be used as there
normal temperature is maintained.
scratched, which may cause the CD to
are no grooves for dust to get in as is the
(The operational temperature range is:
make popping sounds.
case with LPs.
-10
Do not use heart-shaped discs, octagon-
Copy-protected CDs such as S-type CDs
Steam can be condensed on the fiberoptic
shaped discs, or any other abnormally
may not function in the device.
lens due to rain, wet conditions, or upon
shaped disc. Such discs may be the cause
DATA CDs are not supported by the
operating the heating system.
of malfunctions.
device. (However, such discs may operate
Skipping may occur to the audio when
Do not clean discs with chemical solutions
abnormally.)
driving on bumpy roads for prolonged
About CDP
Precautions upon handling discs
periods of time or upon severe shock to
such as record sprays, antistatic sprays,
antistatic liquids, benzene, or thinners.
~ 65 ).
For safe and efficient operation
the vehicle.
Such materials may cause the surface of
Do not disassemble the CDP for repair
Do not use chemical solvent to clean the
DISC to be unrecoverable.
purposes. Contact your place of purchase
device. Such solvents may cause damage
Do not expose the disc to direct sunlight
in the case of malfunction. (Complete
to the surfaces of the device.
for prolonged periods of time. Such
service assistance will not be provided if
Always use a clean and dry cloth.
exposure may lead to disc deformation.
the user disassembles the device.)
Dust, scratch, and other substances may
Do not use water to clean the device.
cause popping sound while playing as
Exposure to water may cause damage to
well as sound deterioration.
the device.
AUDIO SYSTEM 2-11
Operating the CDP
Never place paper on either side of the
PART 2 AUDIO SYSTEM
WARNING !
Disc format
Disc media
Disc format
CD
CD-DA
CD-R
MP3
CD-RW
WMA
Multisession-CD
DTS-CD
Always give your full attention to driving.
Avoid operating your system in such a way
that you can be distracted driving vehicle
operation.
CD
CD-ROM
CD-G
Supported disc formats
CD-EXTRA
The disc types supported by this device
CD-TEXT
are as shown below.
SACD
SACD
SACD(Hybrid)
Disc Size
3-inch (7.6 cm)
5-inch (12.7cm)
Disc format
Audio format
CD-R or CD-RW DISC burned with a bulk
CD
LPCM
CD without quality guarantees may not
MP3
MPEG1, Layer3
MPEG2, Layer3
MPEG2.5
WMA
2-12 AUDIO SYSTEM
Ver9
be recognized by the device.
Inserting an abnormal disc may result in
faulty operation or recognition.
Disc/Content format compatibility
Ordinary disc compatibility
This
device
has
This device plays audio files compressed by
MPEG-1 audio stream layer 3(MP3) using 32,
this device is not supported.
44.1 and 48kHz fixed bit rates. Incompatible
software bearing the following logo marks.
Although CD-R/RW discs burned as audio
files are not supported.
CD-RW
CDs which have not been finalized are not
Variable bit rate files may operate, but the
supported by the device, some information
play time information may not be
such as play time may be displayed.
properly displayed.
PC-created DISC compatibility.
Physical formats of CD : Model 1, Model 2
When recording a disc with a personal
XA format 1.
CD-R/RW discs (Audio CD and MP3 CD)
computer, even discs recorded in a
This device only supports tracks with file
created with CD-writing devices or
"format compatible" with the formats
extension of ".MP3" or ".WMA".
personal computers may not properly
described above may not operate on the
This device does not support multi-
function in the device. This may be
device caused by software settings of the
session discs.
caused by damaged recording method,
recording application.
This device supports a maximum of 256
contamination by dirt and other foreign
In such cases, contact the software
folders and maximum 512 files.
substance on the disc surfaces or play
developer.
lens, and various other reasons.
Additional
Folders and files which exceed this limit
information
regarding
will not be supported.
compatibility can be found on the CD-R/
There are various bit rates which can be
Special formats or special features
RW software disc box.
encoded onto a MP3 file.
regarding software
DVD-R/RW are not supported by the
This device has been designed to be
CD-R/RW Compatibility.
device.
compatible with various bit rates.
This device operates as a CD-ROM
Audio which has been encoded at
including CD-R and CD-RW DISC written in
128kbps will sound similar to CD audio
CD Audio or MP3 CD Format.
sound quality.
AUDIO SYSTEM 2-13
Operating the CDP
The writing of CD-R and CD-RW discs with
CD-R
designed/
Compressed audio compatibility
abnormal disc operation such noise.
manufactured to be compatible with
Audio-CD
been
However, other contents may cause
PART 2 AUDIO SYSTEM
Although this device supports low bit rate
Inserting/Ejecting Disc
MP3 tracks, such tracks may only provide
INFORMATION
If the operation mode had been in Audio
Inserting a Disc
low quality sound.
For stable operation, the use of files in
mode before ejecting the disc, the device
Insert the disc into the slot.
will be converted back to Audio mode.
95kbps ~ 192kbps bit rate range and
The disc will begin playing automatically
If the operation mode had been in
44.1kHz SAMPLING
recommended.
after it has been inserted.
Navigation mode, then Navigation mode
frequency
is
screen will remain.
INFORMATION
If the operation mode had been Audio mode
removing for approximately 10 seconds, the
before inserting the disc, the device will
disc will be re-inserted automatically into
convert to the DISC mode screen and begin
the disc player.
playing.
In such a case, the disc will not begin
If the operation mode had been Navigation
playing automatically.
mode, then Navigation mode screen will
remain and the disc play status will be
displayed through the Audio bar.
Ejecting a Disc
Press the
button.
The disc will immediately be stopped and
ejected.
2-14 AUDIO SYSTEM
If the disc is straddled on the slot without
CD
CD screen and functions
[REW/FF CD track], page 2-17.
Random
Listening to CD music
button : Plays the tracks on the
disc in random order.
[Setting Random function for CD
playing track.
[Setting Repeat function for CD
music], page 2-18.
Scan button : Scans all tracks on the
Mode display : Displays that the current
Insert the CD or press the
MEDIA
button on the control panel if the CD is
already inserted.
mode is CD mode.
RANDOM/REPEAT/SCAN indicator : If
RANDOM/REPEAT/SCAN is operating,
the switch is displayed.
Select the desired track.
[Selecting the CD track], page 2-16.
disc for 10 seconds each.
[Scanning CD track], page 2-18.
Sound
button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Audio sound setting], page 1-11.
Play time : Displays the play time.
Track number : Displays the current
playing track number.
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"DISC"
button : Plays or pauses the
current track.
button : REW or FF
[Selecting the CD track], page 2-17.
button : Previous or next
"CD"
"CD Track <1 to 665>"
track.
AUDIO SYSTEM 2-15
Operating the CDP
music] , page 2-17.
Repeat button : Repeats the current
PART 2 AUDIO SYSTEM
Voice Command
Selecting the CD track
There are 2 ways to select a CD Track - (a)
selecting through Track Up/Down, (b)
selecting through searching Track.
(a) Selecting through Track Up / Down
Press the SEEK
or TRACK
buttons on
the control panel or the SEEK
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
Press and hold the SEEK
or TRACK
buttons on the control panel or steering
wheel remote controller or the
or
"Next Track"
buttons for over 0.8 second.
"Previous Track"
The track will play 20 times faster while
holding the button and return to normal
or SEEK
buttons on the steering wheel remote
controller or the
or
buttons on
REW/FF CD track
play when the button is released.
(b) Selecting track through search
Turn the TUNE knob on the control
Setting Random function for CD
music
the screen for less than 0.8 second.
panel in clockwise or counter-clockwise
The next or previous track will begin
direction.
Each click on the TUNE knob will display
Press the Random button.
the information of the next or previous
Each press will change the function in the
track. The current playing track will
following order: RANDOM
playing.
INFORMATION
If the TRACK
button on the control panel
or the SEEK
button on the steering wheel
remote controller or the
button on the
continue to be played.
* RANDOM : plays all tracks in the disc in
Press the TUNE knob at the desired
screen is pressed shortly while the track has
track.
played for more than 3 seconds, the start of
The searched track will begin playing.
the current track will begin playing.
If the track has been playing for less than 2
seconds, the start of the previous track will
begin playing.
2-16 AUDIO SYSTEM
RANDOM OFF
RANDOM
random order.
Voice Command
1. Press the
Scanning CD track
button on the steering wheel
Press the
remote controller.
Scan
button. Each press will
change the function in the following
2. After the beep sound, say a command.
"Random"
order: SCAN
SCAN OFF
SCAN.
Operating the CDP
* SCAN : Scans all tracks in the disc for 10
Say "Random" or "Random Folder" again or
seconds each.
say "Normal Play" in order to terminate the
Voice Command
set Random function.
1. Press the
button on the steering wheel
remote controller.
Setting Repeat function for CD
music
2. After the beep sound, say a command.
"Scan"
Press the Repeat button. Each press will
Say "Normal Play" in order to terminate the
change the function in the following order:
set Scan function.
REPEAT
REPEAT OFF
REPEAT
Press the
* REPEAT : repeats the current playing track.
Scan
button again to
continue listening to the track.
Voice Command
1. Press the
button on the steering wheel
The scan will be terminated and the
current track will continue to be played.
remote controller.
2. After the beep sound, say a command.
INFORMATION
"Repeat Track"
When scanning has completed an entire
Say "Repeat File" or "Repeat Folder" again
revolution, the scan function is automatically
or say "Normal Play" in order to terminate
terminated and the previous played track will
the set Repeat.
be restored.
AUDIO SYSTEM 2-17
PART 2 AUDIO SYSTEM
MP3
MP3 disc related information and
precaution
Supported media formats
Although the full length of the file name can
This device supports ISO9660 LEVEL1 and
be displayed by using the scroll function, the
LEVEL2. Detailed specification is as below.
full length of folder names may not be
Maximum directory layers: 8 layers
displayed as the scroll function does not
Maximum folder length: 64 Bytes, file
operate when displaying folder names.
Information
name length: 64 Bytes
The MP3 file standards supported by the
Supported characters for folder name/ file
device are as follows.
name: Alphanumeric characters, Korean
Please use an MP3 bit rate which is less than
Acceptable standard: MPEG1 AUDIO
standard character set 2350 characters,
128 kbps.
LAYER 3
Simplified Chinese 4888 characters
The sound quality cannot be guaranteed for
Acceptable sampling frequency: 32, 44.1,
Maximum number of folders which can
MP3s exceeding 128kbps.
48 (KHz)
be stored onto one disc: 256 folders
Acceptable bit rate: 32, 40, 48, 56, 64, 80,
(including ROOT directory)
96, 112, 128, 160, 192, 224, 256, 320
Maximum number of files which can be
(kbps)
stored onto one disc: 512 files
Recommended bit rate & reference
Precautions upon burning MP3 files
sampling frequency: 96,128, 192 kbps
The use of ISO 9660 LEVEL 2 JULIET
fixed bit rate /44.1KHz
format is recommended when burning
ID3 tag
MP3 files. Burning in other formats may
This device supports ID3v1.0, ID3v1.1,
abnormally display the file names.
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
It is possible to display up to 32 characters
Supported media
for file and folder names in case of
The MP3 media supported by the device
UNICODE, and up to 64 characters in case of
are CD-ROM and USB.
ASCII.
2-18 AUDIO SYSTEM
Precaution
Listening to MP3 music
MP3 screen and functions
button : REW or FF.
[REW/FF MP3 file], page 2-22.
button : Previous or next
Random
button : Plays all files on the
disc or folder in random order.
[Setting Random function for MP3
file] , page 2-22.
Repeat button : Repeats the current
Insert the MP3 disc or press the MEDIA
Mode display: Displays that the current
button on the control panel if the MP3
mode is MP3 disc mode. (MP3 files on
disc is already inserted.
DVDs are not supported.)
REPEAT/RANDOM/SCAN indicator: If
Select the desired file.
[Selecting the MP3 file], page 2-21.
REPEAT/RANDOM/SCAN is operating,
the switch is displayed.
Play file position : Current playing file /
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
total files
Play time: Displays the play time.
Folder name: Displays the folder name.
File name: Displays the file name.
"DISC"
"CD"
"MP3"
button: Plays or pauses the
current file.
playing folder or file.
[Setting Repeat function for MP3 file],
page 2-23.
Scan
button : Scans all files on the
disc or folder for 10 seconds each.
[Scanning MP3 file], page 2-23.
List
button : Displays the MP3
folders and file lists for the disc.
[Selecting the MP3 file], page 2-21.
Info.
button : Displays or hides the
detailed file information for the current
playing file.
[Browsing detailed information about
the MP3 file], page 2-22.
AUDIO SYSTEM 2-19
Operating the CDP
track.
[Selecting the MP3 file], page 2-21.
PART 2 AUDIO SYSTEM
Sound
button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Audio sound setting], page 1-11.
the current file will begin playing.
INFORMATION
If the file has been playing for less than 2
If the operation of the TUNE knob is too
seconds, the start of the previous file will
rapid, there may be a delay in displaying the
begin playing.
file information.
Selecting the MP3 file
There are 3 ways to select an MP3 file - (a)
selecting through file up/down, (b)
selecting through searching files, (c)
selecting through MP3 list.
Voice Command
1. Press the
Press the TUNE knob at the desired file.
button on the steering wheel
The searched file will begin playing.
remote controller.
2. After the beep sound, say a command.
"Next File"
(c) Selecting through MP3 List
List
Press the
button.
(a) Selecting through File Up / Down
Press the SEEK
or TRACK
buttons on
"Previous File"
The file list of the folder for the current
"Next Folder"
playing file will be displayed.
the control panel or the SEEK
"Previous Folder"
SEEK
or
buttons on the steering wheel
remote controller or the
or
INFORMATION
(b) Selecting through search
Turn the TUNE knob on the control
If many songs and folders are recorded onto
second.
panel in clockwise or counter-clockwise
cause the play list to be improperly displayed
The next or previous file will begin playing.
direction.
Each click on the TUNE knob will display
or song search through TUNE operation to
the information of the next or previous
In such cases, wait until file loading is
file. The current playing file will continue
complete and try again.
Within the MP3 list screen, if the Now playing
buttons on the screen for less than 0.8
INFORMATION
If the TRACK
button on the control panel
or the SEEK
button on the steering wheel
remote controller the
to be played.
a DISC, file loading time may be longer and
operate improperly.
button on the
button is pressed while searching for files
screen is pressed shortly while the file has
within a folder or a page, the current playing
played for more than 3 seconds, the start of
file list will become displayed.
2-20 AUDIO SYSTEM
Browsing detailed information
about the MP3 file
Press the
Info.
button.
The detailed information (Title, Album,
displayed.
Press the Random button.
* RANDOM (less than 0.8 second) : Plays all
files in the disc in random order
* FOLDER RANDOM (over 0.8 second) :
Plays the files in the current folder in
Press the desired menu to return to the
random order.
main screen and play the selected file.
Voice Command
1. Press the
REW/FF MP3 file
Press and hold the SEEK
or TRACK
2. After the beep sound, say a command.
buttons on the control panel or the
SEEK
or SEEK
buttons on the steering
wheel remote controller or the
or
button on the steering wheel
remote controller.
"Random"
Press the
OK
button.
"Random Folder"
buttons for over 0.8 second.
The detailed information will be turned
Say "Random" or "Random Folder" again or
The file will play 20 times faster while
off.
say "Normal Play" in order to terminate the
holding the button and return to normal
set Random function.
play when the button is released.
Press the Random button again to
continue listening to the current file.
The random selection will be terminated
and the current file will continue to play.
AUDIO SYSTEM 2-21
Operating the CDP
Artist) for the current playing MP3 will be
Setting Random function for MP3
file
PART 2 AUDIO SYSTEM
Setting Repeat function for MP3 file
Scanning MP3 file
Press the
Press the
Repeat
button.
* REPEAT (less than 0.8 second) : Repeats
the current playing file
* FOLDER REPEAT (over 0.8 second) :
Repeats the files in the current folder
Scan
button.
revolution, the scan function is automatically
in the disc and plays for 10 seconds each.
terminated and the previous played file will
* FOLDER SCAN (over 0.8 second) : Scans all
files in the current folder for 10 seconds
each.
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat File"
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat Folder"
"Scan"
Say "Repeat File" or "Repeat Folder" again
"Folder Scan"
or say "Normal Play" in order to terminate
Say "Normal Play" in order to terminate the
the set Repeat function.
set Scan function.
Press the Repeat button again to stop
Press the
repeating the current file.
continue listening to the file.
The repeat selection will be terminated
The scan selection will be terminated and
and the current file will continue to play
the current file will continue to play.
once until the next file starts to play.
2-22 AUDIO SYSTEM
When scanning has completed an entire
* SCAN (less than 0.8 second) : Scans all files
Voice Command
1. Press the
INFORMATION
Scan
button again to
be restored.
Operating the external devices
Listening to music from iPod
and may not properly operate or display all of
the display information.
iPod
iPod is a registered trademark of Apple
Inc.
Supported iPod devices : iPod 3G, iPod 5G,
5.5G, iPod Mini, iPod Nano 1G, 2G.
If iPod mode cannot be entered due to
identification error, no track, incompatible
protocol version, or other reasons, a pop-up
Connect the iPod device as shown in the
message "No Media Connected" will be
picture.
displayed for 5 seconds and return
automatically to the previous mode.
MEDIA
If the message continues even after
Connect the iPod or press the
reconnecting the iPod, check to see if there
button on the control panel if the iPod is
are any problems with the iPod device.
already connected.
CAUTION
INFORMATION
If a playing iPod is connected to the audio
Even if the iPod is connected, the 'No Media
system, a high-pitched tone may occur for
Connected' message may be displayed if an
The identification of the iPod device, battery
approximately 1-2 seconds.
error has occurred. In such a case, reconnect
recharge, and other functions provided by
Please turn the iPod device to pause/stop
the iPod.
the iPod device can be normally supported
prior to connecting it to the vehicle.
only by using a separated sold iPod
connector cable.
Select the desired song.
[Selecting music from iPod], page 2-26.
If the USB cable provided upon purchasing
the iPod for charging is used as the connector
cable, the device will be recognized as a USB
AUDIO SYSTEM 2-23
Operating the external devices
Connecting iPod devices
PART 2 AUDIO SYSTEM
INFORMATION
iPod screen and functions
An iPod cable assembly can be purchased at
button : REW or FF.
[REW/FF iPod music], page2-27.
button : Previous or next
your local KIA dealer.
track.
[Selcting music from iPod], page 2-26.
Voice Command
1. Press the
button on the steering wheel
Random
randomly in album unit.
[Setting Random function for iPod
2. After the beep sound, say a command.
"iPod"
Mode display: Displays that the current
mode is iPod mode.
RANDOM/REPEAT indicator: If RANDOM/
REPEAT is operating, the switch is
displayed.
Play file position: Current playing file /
total files
Play time: Displays the play time.
music], page 2-27.
Repeat button: Repeats the current
playing music.
[Setting Repeat function for iPod
music], page 2-28.
Menu
button : Converts to the
category menu screen.
[Selecting music from iPod], page 2-26.
Info.
button : Displays or hides the
Category name: Displays the category
detailed file information for the current
name of the playing file.
playing file.
[Browsing detailed information about
Title name: Displays the title name of
the playing file.
button : Plays or pauses the
current file.
2-24 AUDIO SYSTEM
button : Plays all music in the
current playing list in random order or
remote controller.
the iPod music], page 2-28.
Sound button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Audio sound setting], page 1-10.
Voice Command
Selecting music from iPod
There are 3 ways to select songs from the
iPod device - (a) selecting song through
Up/Down, (b) selecting song through
1. Press the
button on the steering wheel
remote controller.
"Next Song"
through menu.
"Previous Song"
(b) Selecting song through search
Turn the TUNE knob on the control
or SEEK
panel in clockwise or counter-clockwise
direction. Each click on the TUNE knob
buttons on the steering wheel remote
controller or the
or
buttons on
will display the information of the next or
Press the button for the desired search
the screen for less than 0.8 second. The next
previous song. The current playing song
method.
or previous song will begin playing.
will continue to be played.
INFORMATION
INFORMATION
INFORMATION
If the search mode is accessed while playing a
If the TRACK
button on the control panel
If the operation of the TUNE knob is too
song, the most recent searched step will be
or the SEEK
button on the steering wheel
rapid, there may be a delay in displaying the
displayed.
song information.
The search steps upon initial connection are
remote controller or the
button on the
listed below.
screen is pressed shortly while the song is
playing for more than 3 seconds, the start of
Press the TUNE knob at the desired song.
the current song will begin playing. If the
The searched song will begin playing.
song has been playing for less than 2 seconds,
the start of the previous song will begin
playing.
AUDIO SYSTEM 2-25
Operating the external devices
the control panel or the SEEK
The iPod menu screen will be displayed.
2. After the beep sound, say a command.
sequential search, (c) selecting song
(a) Selecting song through Up / Down
Press the SEEK
or TRACK
buttons on
(c) Selecting song through Menu
Press the Menu button.
PART 2 AUDIO SYSTEM
1 Step
2 Step
3 Step
Setting Random function for iPod
music
4 Step
Playlist
Playlist
Song
Genre
Genre
Artist
Album
Artist
Artist
Album
Song
Song
Composer
Composer
Album
Song
Song
Press the Random button.
Song
* RANDOM (less than 0.8 second) : Plays all
files in the current playing list in random
order.
* ALBUM RANDOM (over 0.8 second) : Plays
Song
Album
Album
Song
Audiobooks
Song
Song
Songs
Song
Song
Podcasts
Program
Episode
the songs in the current playing list
randomly in Album units.
Voice Command
Episode
1. Press the
button on the steering wheel
remote controller.
REW/FF iPod music
Press and hold the SEEK
2. After the beep sound, say a command.
or TRACK
"Random"
"Random Album"
buttons on the control panel or the
SEEK
or SEEK
buttons on the steering
Say "Random" or "Random Album" again or
wheel remote controller or the
say "Normal Play" in order to terminate the
or
buttons for over 0.8 second.
set Random.
The song will play 20 times faster while
Press the desired song button to return
holding the button and return to normal
Press the Random button again to
to the main screen and play the selected
play when the button is released.
continue listening to the current song.
song.
The random selection will be terminated
and the current song will continue to
play.
2-26 AUDIO SYSTEM
Setting Repeat function for iPod
music
Press the Repeat button.
Browsing detailed information
about the iPod music
Press the
Info.
button.
Each press will change the function in the
following order: REPEAT ยก REPEAT OFF ยก
The detailed information (Title, Album
REPEAT
displayed.
and Artist) for the current channel will be
Operating the external devices
* REPEAT : Repeats the current playing
song.
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat Song"
Say "Normal Play" in order to terminate the
Press the
set Repeat function.
The detailed information will be turned
off.
OK
button.
AUDIO SYSTEM 2-27
PART 2 AUDIO SYSTEM
USB
USB MP3 related information and
precaution
Supported media formats
MP3s exceeding 192Kbps and operation of
This device supports ISO9660 LEVEL1 and
specific functions (limited to FF/REW
LEVEL2. Detailed specification is as below.
functions) may be abnormal with variable
Maximum directory layers: 20 layers
bit rates.
Maximum length of folder name/file
Information
name: 250Bytes
The MP3 file standards supported by the
Supported characters for folder name/ file
device are as follows.
name: Alphanumeric characters, Korean
When using the external USB device, make
Acceptable standard: MPEG1 AUDIO
standard character set 2350 characters,
sure to keep the device disconnected and
LAYER 3
Simplified Chinese 4888 characters
connect only some time after turning on
Acceptable sampling frequency: 32, 44.1,
Maximum number of folders which can
the vehicle ignition. The USB device may be
48 (kHz)
be stored onto one USB: 2000 folders
damaged if the USB device already
Acceptable bit rate : 32, 40, 48, 56, 64, 80,
(including ROOT directory)
connected when the ignition is turned on.
96, 112, 128, 160, 192, 224, 256, 320
Maximum number of files which can be
(USB device is not an electronic automotive
(kbps)
stored onto one USB: 6000 files
component)
Recommended bit rate & reference
Precautions upon formatting USB &
The external USB device may not operate
sampling frequency: 96,128, 192 kbps
downloading MP3 files
if the USB device already connected when
fixed bit rate /44.1kHz
The device only supports FAT type USB
vehicle ignition is turned on or off.
ID3 tag
file system. The device will not play USB
The device will not operate when playing
media content if the USB is NTFS type.
a format which is not MP3 or WMA file
This device supports ID3v1.0, ID3v1.1,
formats.
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
Supported media
Precautions upon handling USB
Precaution
The MP3 media supported by the device
Please use an MP3 bit rate which is less than
Only MP3 files with compression rates
are CD-ROM and USB.
192kbps and a fixed bit rate.
between 8kbps~320kbps are supported.
The sound quality cannot be guaranteed for
2-28 AUDIO SYSTEM
Repeatedly connecting/disconnecting the
Do not use the USB I/F to charge batteries
between 8kbps~320kbps are supported.
USB in a short period of time may cause
or USB accessories which generate heat.
damage to the device.
Such acts may lead to deteriorated
Be cautious of static electricity when
When disconnecting the USB, an abnormal
performance or damage to the device.
connecting/disconnecting the external
sound may occur occasionally.
The device may not recognize the USB
USB device.
Abruptly disconnecting the external USB
device if separately purchased USB hubs
Encoded MP3 Players will not be
device while the USB is operating may
and extension cables are being used.
recognized when connected as the
cause the device to be damaged or
Connect the USB directly to the multimedia
external device.
function abnormally.
terminal of the vehicle.
When connecting an external USB device,
Make sure to disconnect the USB device
In the case of high capacity USB devices,
the device may not properly recognize
only after the audio power is turned off or
there are instances where the logical drives
the USB when the USB is in some states.
when the audio is operating in a different
are partitioned for user convenience.
When formatting the external USB device,
mode.
In this case, only the USB music in the top-
the device may not properly be properly
The amount of time required to recognize
level logical drive will be possible to play.
recognize a Byte/Sector selection other
the external USB device may differ
When using partitioned drives, save the
than 512Byte or 2048Byte.
depending on the type, size, or file
desired songs to play on the device only
The device will only recognize USB
formats stored on the USB.
in the top-level logical drive.
devices formatted in FAT 12/16/32.
Such differences in the required time are
In addition, certain USB devices are
Some USB devices may not operate
not indications of malfunction.
configured with a separate drive used to
properly because of compatibility issues.
Please wait for the required period of
install application programs and songs
Verify that the external device is supported
time to recognize the device.
from such drives may not be possible to
by the device before starting use.
The device supports only USB devices
play for the reasons as described above.
Avoid contact between the USB connector
used to play music files.
with bodily parts and foreign substances.
AUDIO SYSTEM 2-29
Operating the external devices
Only WMA files with compression rates
PART 2 AUDIO SYSTEM
The device may not support normal
Please make certain only to use plug type
operation if MP3 Players, cellular phones,
connector products as shown below.
Listening to USB music
digital cameras, or other electronic
devices (USB devices not recognized as
Plug Type Connector
portable disk drives) are connected to the
device.
The device may not support normal
operation when using a USB memory
type besides the Metal Cover Type USB
Memory.
Connect a USB or press the
The device may not support normal
operation when using formats such as
HDD Type, CF, or SD Memory.
Connecting the USB devices
MEDIA
button on the control panel if the USB is
already connected.
Connect the USB as shown in the picture.
The device will not support files locked by
Select the desired file.
[Selecting the MP3 file], page 2-21.
DRM (Digital Rights Management).
The device may not support. Please make
sure to use normal operation if the proper
connection with the USB memory fails
INFORMATION
due to vibrations caused by the vehicle. (i-
The USB screen and operation method is the
stick type, etc.)
same with MP3 mode.
Please avoid using USB memory products
Please refer to the MP3 mode section for
which can be used as key chains or
more information.
cellular phone accessories as they could
cause damage to the USB jack.
2-30 AUDIO SYSTEM
Voice Command
1. Press the
AUX
button on the steering wheel
Connecting AUX
remote controller.
2. After the beep sound, say a command.
"USB"
Playing AUX
Connect the external Audio player as
shown in the picture.
Connect an AUX or press the CD/AUX
button on the control panel if the AUX is
already connected.
INFORMATION
Connect only by using AUX terminals.
Voice Command
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Line In"
AUDIO SYSTEM 2-31
Operating the external devices
External Audio Device
PART 2 AUDIO SYSTEM
AUX screen
Audio AUX screen
2-32 AUDIO SYSTEM
MEMO
Operating the external devices
PART 3 NAVIGATION SYSTEM
PART 3
NAVIGATION SYSTEM
Limitations of the navigation
system
3-2
GPS signal reception state
Vehicle position display
Route guidance
Route Re-calculation
3-2
3-3
3-4
3-4
Starting navigation system
3-5
Map Functions
3-5
Current position map screen
(without route)
3-5
Switching map mode
(North up/Heading up)
Viewing GPS signal state
Changing the map scale
3-6
3-7
3-8
Displaying / Hiding POI icons
on the map
Displaying / Hiding Q.POI icons
3-9
3-9
Setting a Destination
Displaying /Hiding icons other than
Q.POI icons
3-9
Making a call to POI
3-10
Scrolling map
3-11
3-12
Destination menu screen and functions
Searching a Destination
Searching an Address
Searching a Previous Destination
Searching an Intersection
Searching a POI
Searching from Address book
Searching for Emergency facilities
Searching your Home
Searching favorite places
Searching from MAP
Searching POI by local POI list
3-12
3-13
3-13
3-17
3-17
3-20
3-24
3-25
3-25
3-26
3-26
3-26
Operating after searching a
destination
Changing destination position
Setting as Destination/waypoint
Adding to address book
3-27
3-27
3-27
3-27
Operating after setting
a destination
Starting Route Guidance
Route guidance screen
Selecting other route
Route guidance
3-28
3-28
3-28
3-29
3-30
Route menu screen and functions
3-30
Finishing route guidance
(Delete Destination)
Route overview(View Entire Route)
Changing Route option
Editing waypoints
Adding waypoints
Deleting waypoints
Re-ordering waypoints
Setting detour distance
Setting avoid streets on route
3-30
3-31
3-32
3-32
3-32
3-34
3-34
3-35
3-35
PART 3
NAVIGATION SYSTEM
Setup and Information
Setup menu screen and functions
Main setting
3-36
3-36
3-36
3-36
Setting voice command feedback
ON/OFF
Setting Language
Initializing system
Navigation setting
Setting units (mile/km)
3-37
3-37
3-37
3-38
3-38
Setting arrival time and distance
display
Registering avoid area
Editing avoid area
Deleting avoid area
Deleting all avoid areas
Setting Q.POI icons
Setting estimate travel time
My places setting
3-38
3-38
3-40
3-41
3-41
3-42
3-42
3-43
Registering new address in
address book
3-43
Editing an address of
address book
3-45
3-46
3-47
3-48
3-48
3-49
3-50
3-51
3-51
3-51
3-52
3-52
3-52
3-54
NAVIGATION SYSTEM
Setting keyboard for inputting
letter
Deleting an address of address
book
Deleting an address book
Registering home address
Deleting home address
Registering favorite place
Deleting favorite place
System information and update
Voice guidance volume setting
Voice guidance volume control
Adaptive volume control ON/OFF
Traffic Setup
Traffic Information
Help
NAVIGATION SYSTEM 3-1
PART 3 NAVIGATION SYSTEM
Limitations of the
navigation system
GPS signal reception state
As the GPS satellite frequency is received
Underneath an overpass
/transmitted in straight lines, reception
may not work if hiding devices are placed
on or near the GPS antenna or when
traveling through the following locations.
Roads within forested areas
Tunnels
Areas near high rise buildings
Basement parking structures
3-2 NAVIGATION SYSTEM
Roads within canyons
Vehicle position display
When driving on a spiral-shaped road.
When using a tire with an incorrect size
When driving in mountain regions with
specification.
When the tire pressure for the 4 tires are
current position mark on the navigation
in an underground parking structure,
different.
When the replacement tire is a worn or
may differ from the actual position of the
building parking structure, or turntable
used tire (Especially studless tires having
vehicle.
with many rotations.
When the tires have recently been
passed a 2nd seasons, etc.)
When driving near high-rise buildings
The position of the vehicle on the
replaced (Especially upon use of spare or
If a roof carrier has been installed
navigation may be different from the
studless tires)
If the battery terminal is removed.
When driving under high speeds or
actual position if the vehicle is under the
following conditions. If such differences
When driving in city streets, the current
occur, driving for a short period of time
position may be displayed on the
will automatically correct the position of
the vehicle through map matching or GPS
opposite side or on an off-road position.
When changing the zoom level from the
information (several minutes may be
maximum zoom in level to a different
necessary in certain cases).
zoom level, the current position mark
When driving on a Y-shaped road with a
may be displayed on a different road.
When driving in heavy traffic with frequent
narrow angle, the current position may
go
be displayed in the opposite direction.
If the vehicle is loaded onto a ferry or a
When driving under slippery conditions,
car transport vehicle, the current
having calculated a long-distance route.
stops in traffic or intersections.
such as heavy sand, snow, etc.
When driving with the tire chain in place.
position mark may be stalled on the last
position prior to loading.
NAVIGATION SYSTEM 3-3
NAVIGATION SYSTEM
from buildings or related causes, the
sharp turns or sudden brakes.
When entering a road after having been
If multipass errors occur due to reflections
PART 3 NAVIGATION SYSTEM
Route Guidance
Route Re-calculation
Suitable route guidance may not occur
Faulty voice guidance may be given if
The following phenomena may occur
caused by search conditions or the
the vehicle breaks from the designated
driving position.
Guidance to go straight may be given
route (ex: if a turn is made at an
after conducting route recalculation.
Guidance may be given to a position
intersection while the navigation
differing from the current position when
while driving on a straight road.
Guidance may not be given even when
provided guidance to go straight).
Map Data may be missing or incorrect
turning at an intersection.
Route Recalculation may take a longer
having turned at an intersection.
There are certain intersections in which
causing route guidance to not be given.
period of time when driving under high
guidance may not occur.
A route guidance signaling for a U-Turn
in a No U-Turn location may occur.
A route guidance signaling entrance into
a no enter zone may occur (No enter
zone, road under construction, etc.).
Guidance may be given to a position
speeds.
A route guidance signaling for a U-Turn
in a No U-Turn location may occur.
A route guidance signaling entrance into a
no enter zone may occur (No enter zone,
road under construction, etc).
Guidance may be given to a position
removed from the actual destination if
removed from the actual destination if
roads to reach the actual destination do
roads to reach the actual destination do
not exist or are too narrow.
Faulty voice guidance may be given if
not exist or are too narrow.
the vehicle breaks from the designated
route (ex: if a turn is made at an
intersection while the navigation
provided guidance to go straight)
3-4 NAVIGATION SYSTEM
Starting navigation system
Map Functions
Current position map screen
(without route)
GPS signal state indicator : Displays the
state of GPS signal reception.
[Viewing GPS signal state], page 3-7.
Map scale level indicator : Displays the
current map scale.
[Changing the map scale], page 3-8.
Landmark icons : Landmark icons are
displayed on the map when the map
DEST , ROUTE , SETUP ). The Caution screen
depending on map data)
[Appendix : Landmark icons], page 7-11.
will always be displayed when first entering
POI icons : POI icons are displayed on
the map when the map scale level is set
into Navigation mode. Read the contents of
the caution screen carefully and press the
Agree button.
Press the MAPVOICE key on the control
panel to display the map of current position
to under 0.5 mi (800m).
[Appendix : POI icons], page 7-8.
and the neighboring area.
Current vehicle position icon : Displays
the current position of the vehicle.
NAVIGATION SYSTEM 3-5
NAVIGATION SYSTEM
scale level is set to under 300 ft (100m
Press the Navigation mode key ( MAPVOICE ,
PART 3 NAVIGATION SYSTEM
North Up / Heading Up switch :
Displays the current map mode and the
Switching map mode (North Up /
Heading Up)
The vehicle icon is displayed in the center
position of the map.
map mode can be switched between
North Up and Heading Up.
[Switching map mode], page 3-6.
Each time the compass button is pressed,
POI : Displays or hides the POI icon on
below.
the map.
[Displaying/Hiding POI icons on the
Heading Up
map], page 3-9.
the screen will switch in the order shown
North Up
Heading Up
INFORMATION
Map scale : Increases or decreases the
All map screens (map screen after setting
map scale.
[Changing the map scale], page 3-8.
destination & whole route display screen)
Heading Up : displays the map always
except the current position screen will always
facing the direction which the vehicle is
be displayed in North Up mode.
traveling. The vehicle icon is displayed in
the lower center position of the map.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"North Up"
"Heading Up"
North Up : displays the map always facing
the North direction regardless of the
direction which the vehicle is traveling.
3-6 NAVIGATION SYSTEM
Viewing GPS signal state
GPS information may not operate under the
The state of GPS signal reception is
following conditions.
displayed as shown below.
- When buildings, tunnels, or other
obstructions block satellite signals.
GPS (active) :
GPS reception is satisfactory.
GPS (inactive) :
3-51.
antenna and block satellite signals.
- When the satellite does not transmit
signals (signal transmission is controlled
NAVIGATION SYSTEM
GPS reception is unsatisfactory.
[System information and update], page
- When materials are placed above the GPS
by the satellite control center in the
United States and may not transmit when
under repair, modification, etc).
INFORMATION
GPS (Global Position System) : GPS is a
- When a digital cellular phone (1.5GHz) is
placed near the GPS antenna.
system developed and operated by the
This system uses GPS information, various
United States which determines the current
sensors, road map data, and other related
location of the user (longitude, latitude, etc.)
information to display the current position.
by generally using 4 or more satellites. This
Errors may occur if the satellite is
system is used with related GPS information,
transmitting inaccurate signals or if which
various sensors, road map data, and other
can only two or less satellite signals can be
navigation related information.
received.
Errors which occur in such conditions
cannot be corrected.
NAVIGATION SYSTEM 3-7
PART 3 NAVIGATION SYSTEM
Changing the map scale
Press the
or
button. The map scale
will be increased or decreased by one level.
INFORMATION
Each time the
or
button is pressed,
Level
Actual distance
mi / ft
km / m
150 ft
50 m
300 ft
100 m
700 ft
200 m
0.25 mi
400 m
0.5 mi
800 m
the scale bar will be displayed.
1 mi
1.6 km
The scale can be changed by directly pressing
2 mi
3.2 km
the scale level on the scale bar.
4 mi
6.4 km
The green color on the scale bar indicates the
8 mi
12 km
current scale level while the orange color
10
16 mi
25 km
indicates the selected scale level.
Press the
or
button for over 0.8
11
32 mi
50 km
12
64 mi
100 km
second. The scale will continuously change.
If the scale range limit is reached, the
13
130 mi
200 km
14
250 mi
400 km
or
button will be disabled.
The map scale range is between 1 and 14:
10,240,000 ~ 1 : 5,000.
3-8 NAVIGATION SYSTEM
Voice Command
1. Press the
key on the steering wheel
Displaying / Hiding POI icons on
the map
INFORMATION
The current displayed POI icons are
highlighted while the icons not being
remote controller.
Displaying/Hiding Q.POI icons
displayed are shown as normal buttons.
"Zoom In"
Press the POI
"Zoom Out"
Related menu buttons will be displayed
If there are no POI icons being displayed,
the ALL OFF button will be disabled.
"Zoom Maximum"
at the bottom of the screen.
POI icons are displayed when the scale is
2. After the beep sound, say a command.
button.
"Zoom Minimum"
"Zoom "
" (ex. Zoom 700ft)"
under 0.5 mi (800m).
INFORMATION
The Q.POI icons are set to
- Parking,
- Bank,
- Hotel,
- Gas Station,
Displaying / Hiding icons other
than Q.POI icons
- Golf Course,
- Fast Food (6 icons) by default.
Press the POI
This setting can be changed in SETUP.
[Setting Q.POI icons], page 3-42.
button.
Related menu buttons will be displayed
at the bottom of the screen.
Press the Others button.
INFORMATION
Q.POI stands for Quick POI and refers to the
function which turns POI icon display on or off
on the map.
Press the icon buttons to display or hide.
To turn off all POI icons displayed on the
map, press the ALL OFF button.
NAVIGATION SYSTEM 3-9
NAVIGATION SYSTEM
"Zoom level <1 to 14>"
PART 3 NAVIGATION SYSTEM
(a) by category list
If the Show Icon(s) button is pressed, the
Making a call to POI
selected menus will be displayed or
hidden on the map screen.
After searching a POI, the POI phone
number information can be used to make a
Voice Command
1. Press the
remote controller.
Press the desired main category button.
call to the POI facility.
key on the steering wheel
Use the various search methods, such as
2. After the beep sound, say a command.
the map scroll function, Q.POI search
"Show " (ex. Show ATM)
function, and destination search function
"Hide " (ex. Hide ATM)
to search for a POI.
"Hide All"
Select the desired sub category menu to
display or hide (Multiple selections are
possible).
Press the selected menu again to cancel
the selection.
3-10 NAVIGATION SYSTEM
Press the
button.
i
INFORMATION
Scrolling map
Making a call is not possible if there is no
Bluetooth is used to make a call to the
Press the map area on the map screen.
no mobile phone connected through
The selected point will be centered on the
Bluetooth.
screen and the scroll mark will be displayed.
For more information of mobile phone
Information about the marked point and
authentication through Bluetooth or
straight line distance from the current
detailed information on conducting search,
refer to
[Pairing and connecting a
position will be displayed at the top of the
NAVIGATION SYSTEM
POI facility.
telephone information for a POI or if there is
screen.
Bluetooth phone], page 5-4.
Once the call is ended, the map is
restored to the current vehicle location.
INFORMATION
If a map area on the map screen is pressed,
the map will continuously scroll in the
corresponding direction until the pressing is
released.
NAVIGATION SYSTEM 3-11
PART 3 NAVIGATION SYSTEM
Setting a destination
Emergency : Sets the destination
through emergency facilities search.
[Searching for Emergency facilities],
Destination menu screen and
functions
page 3-25 .
HOME : Sets the stored HOME as the
destination.
[Searching your Home], page 3-25 .
Address : Sets the destination through
Favorite place 1 ~ 5 :
address search.
[Searching an Address], page 3-13.
Sets the destination with one of the
Previous Dest : Sets the destination
through the previous destination list.
[Searching a Previous Destination],
page 3-17 .
Press the DEST key on the control panel to
Intersection : Sets the destination
display the destination menu screen.
through intersection search.
[Searching an Intersection], page 317.
POI Search : Sets the destination through
POI Category search.
[Searching a POI], page 3-20 .
Address Book : Sets the destination
through address book search.
[Searching from Address book], page
3-24 .
3-12 NAVIGATION SYSTEM
stored favorite places.
[Searching favorite places], page 3-26 .
Searching a Destination
Select the desired state from the list to
change the state.
Searching an Address
There are 2 ways to set the destination
(a) by street
through address search-(a) by street, (b) by
city.
Input the State name and press the
List
button.
Press the Address button.
If the number of matches with the input
is less than 4 results, then the state list
screen will be displayed automatically.
If the number of matches is only one
Press the Street button.
result, then the state will automatically be
changed without having to manually
select the state.
Press the
State
button to change the
state.
NAVIGATION SYSTEM 3-13
NAVIGATION SYSTEM
Press the DEST key.
PART 3 NAVIGATION SYSTEM
Input the House number and Press the
Done button to complete.
If the House number is not recognized,
press the Skip button.
In this case, the range of house numbers
will be displayed during the last step.
If the desired street from the list is
selected, the corresponding position will
Input the city name and press the
List
button to complete.
be displayed on the map.
If the number of matches with the input
is less than 4 results, then the list screen
INFORMATION
will be displayed automatically.
If more than 30 cities exist with the selected
street, then the city input screen will be
Input the Street name and press the
List
button.
displayed. If less than 30 cities exist, then the
city selection screen will be displayed.
If the number of matches with the input
is less than 4 results, then the street list
screen will be displayed automatically.
Select the desired city from the list.
3-14 NAVIGATION SYSTEM
Input the House number and press the
Done button to complete.
Input the city name and press and press
the List button.
The corresponding position will be
If the number of matches with the input
displayed on the map.
is less than 4 results, then the city list
screen will be displayed automatically.
(b) by city
This screen will be displayed if the House
step
and more than 2 house numbers
ranges exist.
Select the desired House number range.
Select the desired city from the list.
Press the
City
button.
This screen will be displayed if the House
number had not been inputted during
step
and only one house numbers
range exists.
NAVIGATION SYSTEM 3-15
NAVIGATION SYSTEM
number had not been inputted during
PART 3 NAVIGATION SYSTEM
Input the house number and press the
Done button to complete.
If the House number is not recognized,
press the Skip button.
In this case, the range of house numbers
will be displayed during the last step.
Select the desired street from the list and
This screen will be displayed if the House
the corresponding position will be
number had not been inputted during
displayed on the map.
step
and only one House number
range exists.
Select the house number range and Press
the Done button to complete.
The corresponding position will be
Input the Street name and press the
List
button to complete.
displayed on the map.
Voice Command
If the number of matches with the input is
1. Press the
less than 4 results, then the street list
screen will be displayed automatically.
This screen will be displayed if the House
number had not been inputted during
step
and more than 2 House number
ranges exist.
Select the desired House number range.
3-16 NAVIGATION SYSTEM
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Find address"
[Find address], page 4-19.
Searching a Previous Destination
Press the DEST key.
Searching an Intersection
There are two ways to set the destination
Input the state name and press the
List
button. If the number of matches
through intersection search-(a) by street, (b)
with the input is less than 4 results, then
by city.
the state list screen will be displayed
Press the Previous Dest button.
automatically.
Press the DEST key.
If the number of matches is only one
result, then the state will automatically be
Press the Intersection button.
changed without having to manually
NAVIGATION SYSTEM
select the state.
Select the desired previous destination.
The corresponding position will be
displayed on the map.
Press the
Voice Command
1. Press the
key on the steering wheel
state.
State
button to change the
Select the desired state from the list to
change the state.
remote controller.
2. After the beep sound, say a command.
"Previous destination"
[Previous destination], page 4-24.
"Previous start point"
[Previous start point], page 4-25.
NAVIGATION SYSTEM 3-17
PART 3 NAVIGATION SYSTEM
(a) by street
Select the desired 1st street from the list.
Select the desired 2nd street menu from
the list. The corresponding position will
Press the Street button.
be displayed on the map.
Input the name of the 2nd street and
press the List button.
Input the name of the 1st street and
press the List button.
If the number of matches with the input
If the selected 2nd street is within more
is less than 4 results, then the street list
than 2 cities, then the city list screen will
If the number of matches with the input
screen will be displayed automatically.
be displayed.
is less than 4 results, then the street list
Select the desired city menu from the list.
screen will be displayed automatically.
The corresponding position will be
displayed on the map.
3-18 NAVIGATION SYSTEM
(b) by city
Select the desired city name.
Select the desired 1st street menu from
NAVIGATION SYSTEM
the list.
Press the
City
button.
Input the name of the 1st street and
press the List button.
Input the city name and press the
List
button.
If the number of matches with the input
Input the name of the 2nd street and
press the List button.
is less than 4 results, then the street list
If the number of matches with the input
If the number of matches with the input
screen will be displayed automatically.
is less than 4 results, then the street list
is less than 4 results, then the city list
screen will be displayed automatically.
screen will be displayed automatically.
NAVIGATION SYSTEM 3-19
PART 3 NAVIGATION SYSTEM
Searching a POI
There are 3 ways to set the destination
through POI search - (a) by category, (b) by
name, (c) by phone number.
Press the DEST key.
Select the desired 2nd street menu from
the list.
Press the POI Search
button.
Input the state name and press the
List
button. If the number of matches
The corresponding position will be
with the input is less than 4 results, then
displayed on the map.
the state list screen will be displayed
automatically. If there is only one
matching result, then the state will
automatically be changed without having
to manually select the state.
Press the State button.
If the selected 2nd street is within more
than 2 cities, then the city list screen will
be displayed.
Select the desired city menu from the list.
The corresponding position will be
Select the desired state from the list to
displayed on the map.
change the state.
3-20 NAVIGATION SYSTEM
(a) By category
(a-1) Near current position
Searches for facilities nearby the current
Searches for facilities within a 30 mi (45km)
position or from the city center.
radius of the current position.
Press the desired sub category menu.
NAVIGATION SYSTEM
Press the Category button.
Press the desired main category menu.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Find nearest POI"
[Find nearest POI], page 4-20.
Select the desired menu button.
The corresponding position will be
displayed on the map.
Press the Near current position button to
search for facilities nearby the current
position, or press the Near city center
button to search for facilities in the near
city center.
NAVIGATION SYSTEM 3-21
PART 3 NAVIGATION SYSTEM
(a-2) Near city center
Searches for facilities from the city center.
Press the desired main category.
Select the desired menu button.
The corresponding position will be
displayed on the map.
Input the city name and press the
List
button.
INFORMATION
If the number of matches with the input
The distance on each POI item button refers
is less than 4 results, then the city list
to the distance from the city center.
screen will be displayed automatically.
Press the desired sub category.
Press the desired city menu.
3-22 NAVIGATION SYSTEM
(b) By name
Changing City
Press the City
button.
Input the city name and press the
List
button.
Select the desired city name.
Select the desired POI menu.
button.
The corresponding position will be
Select the desired main category menu.
displayed on the map.
Select the desired sub category menu.
INFORMATION
(c) By phone number
When necessary, the search conditions for
the city and category can be changed by
pressing the Advanced button.
Input the name of the POI and press the
List
button.
If the number of matches with the input
Press the
Phone #
button.
is less than 4 results, then the facilities list
screen will be displayed automatically.
NAVIGATION SYSTEM 3-23
NAVIGATION SYSTEM
Press the
Name
Changing Category
Press the Category button.
PART 3 NAVIGATION SYSTEM
Searching from Address book
Press the DEST key.
Press the Address book button.
Input the phone number and Press the
Done button to complete.
Select the desired address name from
The corresponding position will be
displayed on the map.
The corresponding position will be
the list.
displayed on the map.
[Registering new address in address
Voice Command
1. Press the
book], page 3-43.
key on the steering wheel
Select the desired address book (user)
remote controller.
Voice Command
menu.
1. Press the
2. After the beep sound, say a command.
INFORMATION
"Destination POI by Phone Number"
[Destination POI by phone number],
This system provides 5 address books. Each
page 4-22.
addresses book can hold up to 200 entries.
remote controller.
2. After the beep sound, say a command.
"Destination by address book"
[Destination by address book], page 424.
3-24 NAVIGATION SYSTEM
key on the steering wheel
Voice Command
Searching for Emergency facilities
1. Press the
Press the DEST key.
Searching your Home
key on the steering wheel
Press the DEST key.
remote controller.
2. After the beep sound, say a command.
Press the
Emergency
button.
Press the HOME button.
"Find emergency "
[Find emergency ], page 4-
The Home position will be displayed on
23.
the map.
INFORMATION
If the Home address is not registered, then the
HOME button will be displayed.
[Registering home address], page 3-48.
Select the desired facility category.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Go home"
[Go home], page 4-25.
Select the desired facility.
The corresponding position will be
displayed on the map.
NAVIGATION SYSTEM 3-25
NAVIGATION SYSTEM
PART 3 NAVIGATION SYSTEM
Searching favorite places
Searching from MAP
Position the scroll mark at the destination
Press the DEST key.
by scrolling the map on the map screen.
Select the desired button from 1 ~ 5 .
The corresponding position will be
Searching POI by local POI list
displayed on the map.
Press the POI
INFORMATION
If the address of the Favorite place is not
registered, then the 1 ~ 5 buttons
button on the map
screen.
Press the Others button.
Select the desired POI menu.
The corresponding position will be
displayed on the map.
Voice Command
without registered addresses will be disabled.
[Registering favorite place], page 3-49.
1. Press the
key on the steering wheel
remote controller.
Voice Command
1. Press the
2. After the beep sound, say a command.
key on the steering wheel
"Find nearest "
[Find nearest ], page 4-21.
remote controller.
2. After the beep sound, say a command.
"Destination by memory point <1 to 5>"
[Destination by memory point <1 to 5>],
page 4-25.
3-26 NAVIGATION SYSTEM
Press the Local POI lists button.
Operating after searching a
destination
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Adding to address book :
Saves the position in the address book.
[Registering new address in address
book], page 3-43.
"Start guidance"
(Sets the position of the scroll mark as the
destination and begins route guidance.)
Voice Command
1. Press the
key on the steering wheel
remote controller.
"Store Marked Location to "
Changing destination position :
Changes the position of the destination by
scrolling the map.
[Scrolling map], page 3-11.
Setting as Destination / waypoint :
Sets the position as the destination or
waypoint.
NAVIGATION SYSTEM 3-27
NAVIGATION SYSTEM
2. After the beep sound, say a command.
PART 3 NAVIGATION SYSTEM
Operating after setting a
destination
Voice Command
1. Press the
Route guidance screen
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Time to destination"
"Distance to destination"
Symbol guidance mode : If the
button is pressed, then the following
Starting Route Guidance
route guidance screen will be displayed.
Press the Start Guidance button. Route
Guidance will start.
Route simulation
If the Start Guidance button is pressed
and held for over 0.8 second, then the
route simulation will start.
If the MAP key on the control panel is
Turn-List mode : If the
pressed during route simulation, then
pressed, then the following route
route simulation will be terminated.
guidance screen will be displayed.
3-28 NAVIGATION SYSTEM
button is
Selecting other route
Press the Others button.
Highway mode : If the
Highway junction mode : This route
pressed, then the following route
guidance screen is automatically
guidance screen will be displayed.
displayed during guidance at highway
junctions.
Once guidance at a highway junction is
complete, this screen will automatically
Other routes can be selected by pressing
the
or
buttons.
disappear and the previous guidance
screen will be restored.
Intersection zoom mode : This route
guidance screen is automatically displayed
during guidance at an intersection.
Once guidance at the intersection is
complete, the screen will automatically
disappear and the previous guidance
screen will be restored.
NAVIGATION SYSTEM 3-29
NAVIGATION SYSTEM
button is
PART 3 NAVIGATION SYSTEM
Route guidance
Cancel Route: Deletes destination,
waypoints and terminates route
Route menu screen and functions
guidance.
[Finishing route guidance], page 3-30 .
Finishing route guidance (Delete
Destination)
Press the ROUTE key.
Route Overview: Displays the entire
route and route detailed.
[Route overview], page 3-31 .
Press the Cancel Route button.
Route Option: The route option can be
changed.
[Changing Route option], page 3-32 .
Edit Waypoint: Waypoints can be
added/deleted and the order can be
Press the ROUTE key on the control panel.
The ROUTE menu screen will be displayed.
changed.
[Editing waypoints], page 3-32 .
The destination and waypoints are
Avoid Streets: Searches routes which
deleted and the route guidance is
avoid the selected streets.
[Setting avoid streets on route], page
terminated.
[Finishing route guidance], page 3-30 .
3-35.
3-30 NAVIGATION SYSTEM
Press the Yes button.
Detour: Searches detour routes.
[Setting detour distance], page 3-35 .
Voice Command
1. Press the
Route overview (View Entire Route)
key on the steering wheel
Press the ROUTE key.
remote controller.
2. After the beep sound, say a command.
Press the Route Overview button.
"Cancel route"
(Terminates route guidance and deletes the
set destination and waypoints.)
Press the Turn by turn button.
INFORMATION
If the Return to Guidance button is pressed,
route guidance screen is displayed.
NAVIGATION SYSTEM 3-31
NAVIGATION SYSTEM
The detailed route information can be
viewed.
PART 3 NAVIGATION SYSTEM
Changing Route option
Voice Command
1. Press the
Press the ROUTE key.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Press the Route Option button.
Editing waypoints
Adding waypoints
There are 2 ways to add waypoints - (a)
"Replan recommended route"
searching for POI nearest to the route, (b)
"Replan shortest route"
using advanced search.
"Replan minimize freeway route"
"Replan minimize toll road route"
Press the ROUTE key.
Press the Edit Waypoint button.
Press the button for the desired route
guidance method.
Guidance will be restarted after
recalculating the route with the selected
guidance method.
Press the Press to add new waypoint
button.
3-32 NAVIGATION SYSTEM
(a) Searching POI lists near route
Press the Add as Waypoint button.
Select the desired POI from the list.
Press the Done button to complete.
The corresponding position will be
Guidance will restart after recalculating
displayed on the map.
the route.
NAVIGATION SYSTEM
Select the desired sub category from list.
Press the Near POI lists on Route button.
Select the desired category.
NAVIGATION SYSTEM 3-33
PART 3 NAVIGATION SYSTEM
(b) Using advanced Search
Re-ordering waypoints
The method for searching waypoints through
the Advanced(more) button is the same
Press the ROUTE key.
method as searching destination.
[Searching a Destination], page 3-13.
Press the Edit waypoint button.
Deleting waypoints
Press the Yes button.
Press the ROUTE key.
Press the Edit waypoint button.
Select the desired waypoint and use the
MOVE
, MOVE
buttons to change
the order.
After deleting, press the Done button to
complete.
Guidance will be restart after recalculating.
Once re-ordering is complete, press the
Done button to complete.
Guidance will restart after recalculating
Select the waypoint and press the
Delete button.
3-34 NAVIGATION SYSTEM
the route.
Setting detour distance
Setting avoid streets on route
Press the ROUTE key.
Press the Detour button.
Press the Avoid streets button.
Select the desired detour range.
Select the desired streets to avoid(
Guidance will restart after recalculating
avoid,
the detour route.
button to complete.
NAVIGATION SYSTEM
Press the ROUTE key.
allow) and press the Done
Guidance will restarted after recalculating.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Detour <1 or 2 or 5 or 10> miles"
"Detour <1 or 2 or 5 or 10> kilometers"
NAVIGATION SYSTEM 3-35
PART 3 NAVIGATION SYSTEM
Setup and Information
[Main setting], page 3-36 .
Traffic Setup button : Sets whether to
Setup menu screen and functions
Display button : Adjusts the display
setting. [Display setting], page 1-12 .
display traffic information on map,
whether to provide upcoming traffic
information voice guidance, and whether
Main setting
to display the detour route popup
showing upcoming traffic information.
Press the SETUP key.
Navigation button : Navigation related
settings can be set.
[Navigation setting], page 3-38 .
Press the Main button.
My Places button : The Address book,
Press the
SETUP key on the control panel
to display the setup menu screen.
Home address, Favorite places, Previous
destination can be edited.
[My places setting], page 3-43 .
System Info button : The system version
information can be viewed and system
upgrades can be conducted.
[System information and update],
page 3-51 .
Select the desired changes and press the
Done
button to complete.
Voice Setup button : Adjusts the
Main button : Changes to the input
Navigation guidance volume.
[Voice guidance volume setting],
keyboard type, voice command feedback
page 3-51 .
ON/OFF settings and system initialization
Help button : The help contents can be
viewed.
[Help], page 3-54 .
can be made.
3-36 NAVIGATION SYSTEM
Setting keyboard for inputting
letter
Press the desired keyboard type button.
The selection will be highlighted.
Setting voice command feedback
ON/OFF
Press the desired setting button.
Initializing system
Press the Factory default button.
Setting Language
Press the Change button.
NAVIGATION SYSTEM
Press the menu desired for initialization.
Press the desired language.
Press the Yes button.
Press the Done button to complete.
NAVIGATION SYSTEM 3-37
PART 3 NAVIGATION SYSTEM
Navigation setting
Press the SETUP key.
Registering avoid area
Press the Avoid Area button.
Press the Navigation button.
Set the end position of the avoid area
and press the NEXT button.
Press the Add new avoid area button.
Select the desired changes and press the
Done button to complete.
Press the Done button to complete.
Setting units (mile/ km)
Select the desired distance unit.
Setting arrival time and distance
display
Select the desired setting button.
3-38 NAVIGATION SYSTEM
Set the start position of the avoid area
and press the NEXT button.
Each time the Avoid button is pressed, the
NAVIGATION SYSTEM
If the Avoid area needs to be renamed,
press the Rename button.
function will switch between avoid ( )or
allow( ).
Press the Done button to complete the
setting.
Rename the Avoid area and Press the
Done button to complete.
NAVIGATION SYSTEM 3-39
PART 3 NAVIGATION SYSTEM
Editing avoid area
Press the Avoid Area button.
If the Avoid area needs to be renamed,
press the Rename button.
Each time the Avoid button is pressed,
the function will switch between avoid(
)or allow( ).
Press the Edit avoid area button.
Press the Done button once editing is
complete.
Rename the Avoid area and press the
Done button to complete.
Select the Avoid area button to edit.
3-40 NAVIGATION SYSTEM
Deleting avoid area
Deleting all avoid areas
Press the Avoid area button.
Press the Avoid area button.
Press the Delete button.
Press the Delete all avoid area button.
Press the Yes button.
Select the Avoid area button to delete.
Press the Yes button.
NAVIGATION SYSTEM 3-41
NAVIGATION SYSTEM
Press the Edit avoid area button.
PART 3 NAVIGATION SYSTEM
Setting Q.POI icons
Setting estimate travel time
Press the Edit Q.POI button.
Press the Travel Time button.
Select the desired sub category.
Press the
Select the desired menu.
or
button on the
Residential, Main street, and Freeway
controls to adjust the speed.
Default button to set the
Press the
speeds to the default settings.
Press the Done button to complete.
Press the Done button to complete the
INFORMATION
Q.POI stands for Quick POI and refers to the
Select the desired category.
function which turns POI icon display on or off
on the map.
3-42 NAVIGATION SYSTEM
setting.
My places setting
Press the Add to Address Book button.
(b) by registering in the address book
Press the SETUP key.
Registering new address in
address book
Press the My Places button.
There are 3 ways to register a new address
in the address book - (a) by DEST menu, (b)
by registering address in address book, (c)
from map scroll.
Press the desired address book (user)
button.
Press the DEST key.
Press the Address book button.
Search through the desired method.
The search process is the same as the
method for destination search.
[Searching a destination], page 3-13.
Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
Press the desired address book (user)
button.
NAVIGATION SYSTEM 3-43
NAVIGATION SYSTEM
(a) by DEST menu
PART 3 NAVIGATION SYSTEM
Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
(c) from map scroll
Press the New Address button.
In the map screen, scroll the map to the
Press the desired address book (user)
desired position.
button.
Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
Press the Address button to search the
address.
[Searching an address], page 3-13.
INFORMATION
Press the Store current position button to input
the address of the current position.
3-44 NAVIGATION SYSTEM
Press the Add to Address Book button.
Editing an address of address
book
Press the SETUP key.
Press the My places button.
Select the desired address to edit.
Press the Address book button.
Press the
Name
button to input the
Press the Address button to search the
address name.
address. The process is the same as the
method for searching an address.
[Searching an Address] , page 3-13.
INFORMATION
Select the desired address book (user)
Press the Store current position button to input
button .
the address of the current position.
NAVIGATION SYSTEM 3-45
NAVIGATION SYSTEM
Input the address name and press the
Done button to complete.
PART 3 NAVIGATION SYSTEM
Press the Phone button to input the
phone number.
Deleting an address of address
book
Press the SETUP key.
Press the My places button.
Select the desired address button to
delete.
Input the phone number and press the
Done button to complete.
Press the Address book button.
Press the Delete button.
Press the Done button to complete.
Select the desired address book (user)
button.
3-46 NAVIGATION SYSTEM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Modify Date                     : 2010:02:25 14:09:27-08:00
Create Date                     : 2010:02:25 14:09:14-08:00
Metadata Date                   : 2010:02:25 14:09:27-08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : PA710SLUSB_IC_ATT.E User Manual.pdf
Creator                         : Owner
Document ID                     : uuid:61b26824-7b3a-45d3-a23e-e3725e92e7f1
Instance ID                     : uuid:5b7fedea-2aee-45a4-86b0-eeab26c882da
Producer                        : Acrobat Distiller 7.0 (Windows)
Has XFA                         : No
Page Count                      : 100
Author                          : Owner

EXIF Metadata provided by EXIF.tools