HYUNDAI MOBIS SMK-4N03 SMART KEY ECU User Manual
HYUNDAI MOBIS CO., LTD. SMART KEY ECU
User Manual
Outline of SMART KEY ECU The SMART KEY ECU is a part of START-STOP BUTTON SYSTEM. It is possible to output the LF(125kHz) signal by pushing the button of door handle and SSB. 1. GENERAL DISCRIPTION If the button of door handle or SSB button is pressed, SMART KEY ECU output the LF(125kHz) signal. 1) LF signal output for engine start SSB button is pressed, SMART KEY ECU output LF signal through the interior LF antenna for Fob searching. 2) LF signal output for door lock/unlock and trunk release The button of door handle or trunk is pressed, SMART KEY ECU output LF signal thtough the LF antenna for Fob searching FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas provoquer de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2013:01:16 15:49:48+09:00 Create Date : 2013:01:16 15:49:38+09:00 Author : dongmin_kim Page Count : 2 XMP Toolkit : 3.1-701 Producer : Gaaiho PDF Creator Tool : LM상품성개선 SMK ECU 인증 서류(유럽&일반)_121128.xls Title : LM상품성개선 SMK ECU 인증 서류(유럽&일반)_121128.xls Creator : dongmin_kimEXIF Metadata provided by EXIF.tools