Haier L26A9 Ak Users Manual L37A9 1501英文 7703更换688
L26A9-AK to the manual c0b5b1a6-2ffb-41cc-87b3-b79da3992776
2015-01-23
: Haier Haier-L26A9-Ak-Users-Manual-260590 haier-l26a9-ak-users-manual-260590 haier pdf
Open the PDF directly: View PDF .
Page Count: 47
Download | ![]() |
Open PDF In Browser | View PDF |
TFT-LCD COLOUR TELEVISION RECEIVER OWNER'S MANUAL This User's Manual is applicable for the following models: L26A9-AK,L37A9-AK,L37A9-AKF Please read this manual carefully before operating the unit, and keep it for future reference. *Please read this manual carefully before using your television and keep this manual in a good place for future reference. *To achieve the best performance of your television, read this User's Manual carefully and properly store it for future reference. *Information of screen displays and figures in the User's Manual may vary due to technical innovations. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in serious injury by high voltage. *An exclamation mark in a triangle: Major part or accessory of which technical specifications must be followed if it is to be replaced. Warning: To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture. Attention should be paid to avoid accidental scratches or impacts onto the LCD screen. Caution: Unauthorized disassembly of this product is prohibited. CONTENTS Safety precautions ............................................................... 1 Preparation for the Remote Control ............................................................... 3 Keys and Ports............................................................... 4 Front panel ............................................................... 4 Side panel ............................................................... 4 Back panel ............................................................... 5 Keys of remote control............................................................... 6 OSD display ............................................................... 7 Power on / off ............................................................... 8 Viewing TV program ............................................................... 9 Program play ............................................................... 9 Quick view and program scan ............................................................... 10 Tuning...............................................................11 Automatic search ............................................................... 11 Manual search ............................................................... 12 MFT ...............................................................13 Skip ...............................................................14 Channel exchange and edit ............................................................... 15 Adjusting the picture ............................................................... 16 Multiple picture modes ............................................................... 16 Adjusting the sound ............................................................... 17 Multiple sound modes ............................................................... 17 Sound limit and mute ............................................................... 18 Setting the timer ............................................................... 19 Setting the Clock and time on/off ............................................................... 19 On Prog ............................................................... 20 Setting the function ............................................................... 21 Language and OSD position ............................................................... 21 Menu timeout and menu background option............................................................... 22 PIP ...............................................................23 ............................................................... 23 Child lock De-interlace ............................................................... 24 PC setup............................................................... 25 Setting the other function............................................................... 26 Picture still,sleep timer and program edit ............................................................... 26 Stream media broadcast system ............................................................... 27 Connecting additional equipments ............................................................... 36 Antenna connection............................................................... 36 How to connect the signal with other equipments............................................................... 37 How to connect the video input terminal ............................................................... 38 How to connect the component input terminal ............................................................... 38 How to connect the PC input terminal ............................................................... 39 External speaker installation ............................................................... 40 Woofer installation ............................................................... 40 Troubleshooting ............................................................... 41 Specification ............................................................... 42 Safety Precautions The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards. Unplug the power supply and antenna of the product when there is a rainstorm, especially thunderstorm. Do not use damaged or worn electric plugs, and keep electric cord away from heat sources to avoid electric shocks or fire hazards. Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards. The product must be placed on a solid and stable surface to avoid collapse. Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards. Contact authorized after-sales service if technical service is needed. Disconnect the product from power supply Keep the product away from a transformer and contact authorized after-sales service or heat source to avoid fire hazards. if abnormal sound is heard in the product. 1 Safety Precautions (continued) Don't use or store inflammable materials near the product to avoid explosion or fire hazards. Don't place the product in a humid area to avoid fire hazards. The antenna of the product should be away from electric cable to avoid electric shocks. Never touch the plug when your hand is wet as this might cause electric shocks. Always make sure that the television is well plugged as poor electric connection might cause fire. When antenna is used, measures should be taken to prevent water from flowing down along the cable into the television. Unplug the television, use soft fabric, The plug and electric cable must be kept never chemicals, if you are going to clean to avoid electric shocks or fire hazards. make cleaning of the product. Make sure that no water drops in the product. Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid electric shocks or fire hazards. Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation. 2 Preparation for the Remote Control Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 + Precautions As strong light may interfere the Make sure that there is no signals, change your position to obstacle between the remote operate the remote controller if controller and television set. the television cannot be turned on or off as you expect. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller. Make sure that two 7# 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable. 3 Keys and Ports Front panel 5 1 2 3 4 - CH + - VOL + TV/AV MENU 6 POWER 8 7 1、CH-/+ : program minus and plus , menu options 2、VOL-/+ : volume decrease and increase , menu reset and entry 3、TV/AV: all input source select :TV-VIDEO-SIDE VIDEO-S VIDEO-YUVUSB-VGA-DVI 4、MENU: menu display 5、Power on/off and indicator: in red when standby mode, in blue when display. 6、Remote control signal receive window 7、POWER : AC power on/off 8、Multi-media input Side panel VIDEO L Video VIDEO Audio L AUDIO -L Audio R AUDIO -R AUDIO R USB Rear terminal 4 Keys and Ports (continued) Back panel PC/DVI AUDIO IN POWER 1 R-AUDIO-L OUT WOOFER 2 3 D-SUB IN 4 S-VIDEO IN VIDEO IN 5 6 Y Cb/Pb DVI IN Cr/Pr 7 8 R-AUDIO-L OUT 9 VIDEO OUT 10 L - HD- R IN 11 ANT. L -V/S- R IN 12 13 14 1、POWER:AC power input 2、R-AUDIO-L OUT:External audio output } (Not available on L26A9-AK) 3、WOOFER:External woofer output 4、D-SUB IN:Computer input,For PC display purpose. Connects to the VGA analog output connector of the PC display card. 5、S-VIDEO IN:S-VIDEO input 6、VIDEO IN:external video input 7、YCbCr,YPbPr:is an video input terminal connecting to the video output terminal of the video output device(Y Cb Cr/ Y Pb Pr). 8、DVI IN:For high quality PC display purpose. Connects to the DVI digital output connector of the PC display card. 9、R-AUDIO-L OUT:audio output (to external speaker) 10、VIDEO OUT:external video output 11、L-HD-R IN:external YUV (YCbCr,YPbPr) audio input 12、L-V/S-R IN:external S-VIDEO/VIDEO audio input 13、PC/DVI AUDIO IN :external D-SUB/DVI audio input 14、ANT.: Connect antenna or CATV 75 Ω coaxial cable to receive TV/ CATV signal. 5 Keys of remote control The remote controller cannot be operated unless the batteries are properly loaded. 1.DISPLAY: Display the current info 1 2 2. POWER: Press to turn on the TV from standby 3 5 7 9 11 DISPLAY POWER STILL MUTE I/II TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW OK 13 16 MENU 18 19 25 VOL+ 15 S SM 2 3 4 5 6 7 8 9 20 0 ZOOM/MOVE 22 24 26 28 -/-PIP 17 1 SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME SKIP 27 USB RETURN ENTER 29 12 CHPSM 21 4 6 8 10 14 CH+ VOL- 23 PIC.SIZE ZOOM HELP mode. Press again to switch off the TV to standby mode. 3.STILL: Press it to freeze-frame the current screen press again to continue playing(never see the still picture for long time, it would burn-in the screen) 4. ¢ñ/¢ò: Nicam selection in the signal 5. MUTE: Press this button to mute the sound. Press again to reactivate the sound. Sound also reactivated if the power is turned off then on or if press VOL+ button. 6. PIC.SIZE: Press to select the display the size of the screen(never see the 4:3 picture for long time, it would burn-in the screen) 7. S-VIDEO: Press it to select S terminal input. 8. DVD/DTV: Select YUV input 9. TV/AV : Press this key to select the sources 10. PC/DVI: Press it to select inputs as follows: TV-VGA-DVI-TV 11. OK: Press to confirm 12. Q.VIEW: Back to the last channel 13. CH+/-: Select the option up and down in menu or select channels when there is no OSD. 14. MENU: Press to display or exit the menu 15. VOL+/-: Left and right orientation in menu option or adjust the volume when there is no OSD. 16. PSM: Press to select the picture mode 17. SSM : Press to select the sound mode 18. Number key: Press to select the channel number 19£¬26£¬27£¬28 are not available in these set . 20. ZOOM/MOVE: PIP moving 21. PIP: PIP on or off 22. SCAN: Scan all preconcerted channel program 23.SWAP: Switch the input signal of the PIP and the main picture 24. CH.EDIT: Press to display the stored channel diagram 25. SLEEP: Can be used to set time to change the TV into the standby status after a period of preset time. 29. Only for the multi-media ,reference to the instruction following. The cover of the multi-media keys press down to the appropriate position Note: The function just takes the remote control for example in this manual P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys. 6 OSD display There are some OSD (on screen display)following for you to reference Picture menu Audio menu Brightness Contrast Saturation Hue Sharpness Color Temp. Picture Audio Bass Treble Balance Surround SubWoofer Switch SubWoofer AVL 50 50 50 50 50 Std A A B C B C Tuner Func PC Time Tuner menu Picture Audio Tuner 0 PAL DK Off ----- OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> >>> >>> A Time Tuner >>> 60S English >>> 0 >>> Off A B C B C Func PC Time PC menu Picture Audio Tuner Func PC Time Time menu Clock Off Time Off Time On Time On Time On Prog. >>> Auto Clock Phase H_Position V_Position I/P Info. Picture Audio PC Function menu Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange Picture Audio Func 50 50 50 Off Off 50 Off 0 0 0 0 VGA 0:00 Off 0:00 Off 0:00 0 A A B C B C Tuner Func PC Time Picture Audio Tuner Func PC Time Note: There may be some difference between the above OSD and your realset,you could adjust it according to what you want following the steps as follow: 1. Press MENU button to enter the main menu 2. Press VOL-/+ to select the main menu left and right orientation 3. Press OK or CH+/- to enter the submenu 4. Press MENU to back to the last menu 5. Press VOL+/- to adjust the item of the menu 6. There is no SubWoofer Switch and SubWoofer in sound menu in L26A9-AK 7 Power on/off Power on/off Power ON/OFF 1.Switch on power supply (indicator in red in standby) 2.If the television is on standby mode , you could press POWER button on remote controlleror POWER£¨ £© button on the TV to turn on the TV. 3.If you want to switch off the TV to standby mode press POWER£¨ £© button on TV or POWER button on remote controller . POWER 3 4.Disconnect the power supply or unplug the television if it is intended to completely cease the television performance. 8 Viewing TV Program There are 160 channels from 0 to 159. 观看电视节目play Program How to select program 1 2 3 4 5 6 7 8 9 Select desired program 1.Select buttons directly If program number is selected, press digit 1~9 directly. 2.Select buttons in sequence Press CH+/- button for program option. (Note: If Skip mode is activated, the program will not appear by this way.) 0 Choose the proper volume you like Press VOL+/- button to adjust sound volume. If the color or sound of one channel is abnormal It might be because the color or sound system has been set improperly, you may follow the instruction below to adjust it : press MENU and VOL+/- to select Tuner menu ,you can see the form , then press CH+/- to enter Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio MENU CH- Func PC Time If the color of the picture is abnormal Press CH+/- to "Color Sys.”, then press VOL+/- to select the proper system.(AUTO、PAL,NTSC443 and NTSC M will appear in sequence). CH+ VOL- Tuner VOL+ If the sound is abnormal Enter the Tuner as above and CH+/- to “Sound Sys.”item. Then press VOL+/- to select the system you want. Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio 9 Tuner Func PC Time Viewing TV Program(continued) Quick view function can back to the channel you watched just now quickly Program scanning function is to let the television automatically scan all preconcerted channel program . Quick view and program scan Quick view 1.For example, if you have viewed channel 8 just now and you are watching channel 18 now (as right figure) Q.VIEW 18 8 2.If you want to back to channel 8,just press Q.VIEW button 18 3.If you want to return to channel 18,press Q.VIEW button again . Program scanning function SCAN 1、If you want to scan the programs and select your favorite channel, just press the SCAN button then the television will start scanning from the present channel with a rate of three seconds per channel 0 and until all the preconcerted programs have been 1 displayed once. CH+ 2.If you want to terminate VOL- MENU VOL+ this function during the scanning, press the SCAN or CH- MENU button again, and the program will stay at the present channel 10 0 Tuning There are three ways of searching:automatic search,manual search and MFT manual fine tune) You may operate it either on the TV or on the remote control.Here is mainly about the remote control Automatic search Automatic search 1、Press MENU button and VOL+/- to select Tuner menu, Then press CH+/- to enter CH+ VOL- MENU VOL+ Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio CH- 2、Press CH+/- button to move to Auto Search item。 Tuner Func Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange PC Time 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio Tuner Func PC Time 3、Press VOL+,then Auto Search will work。The TV set will search automatically all available Auto Search programs, after that, all available CH 9 Freq. 308MHz program will be stored in turn and the TV set will return to the first channel CH+ VOL- MENU VOL+ If you want to stop the search, just press MENU button The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed. After searching CH- Press CH+/- button to check the channels. If the color or sound is abnormal in a certain channel, it may be the color or sound system has not been set properly, so you should adjust it to the proper system (Reference to page 9). 11 Tuning(continued) Manual search Manual search 1 1. Press CH+/- button or the Direct-digit choosing button to select a channel directly(take channel 1 for example). CH+ VOL- MENU VOL+ 2、Press MENU and VOL+/to select Tuner menu,then press CH+ to enter CH- 3、Press CH+/- to move to Search Set,then press Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange VOL+ to enter 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio Tuner Func PC Time 4、Press CH+/- to move to Fine Search 32 Search >>> Freq. 112.28MHz CH+ VOL- MENU CH- VOL+ 5. Press VOL+/- button to start Picture searching. VOL- button is used to search the lower frequency channel. VOL+ button is used to search the higher frequency channel. Repeat the steps until you find the channel you need. 12 A B C Audio Tuner Func PC Time Tuning(continued) MFT MFT(manual fine tune) When you can't get a satisfactory picture and audio effect, you can fine tune to obtain. CH+ VOL- MENU VOL+ 1 1. Press CH+/- button or the Direct-digit choosing button to select a channel directly (take channel 1 for example). CH- 2、Press MENU and VOL+/to select Tuner,then press CH+/- to enter 3、Press CH+/- to move to Search Set,then press VOL+ to enter the menu Prog. Color Sys. Sound Sys. Skip VOL-Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio Tuner Func PC Time 4、Press CH+/- to move to Fine. Fine 32 Search >>> CH+ Freq. 112.28MHz VOL- MENU VOL+ A B C CH- Picture Audio Tuner Func PC Time 5. Press VOL+/- button repeatedly to fine tune, until the picture and the sound become satisfactory. VOL- button is used to search the lower frequency channel. VOL+ button is used to search the higher frequency channel. 13 Tuning(continued) Skip Skip After the programs are preset, you can skip some programs so that to select your favorite channels only. CH+ VOL- MENU VOL+ 1. Press CH+/- button or Direct-digit choosing button to select a channel directly (take channel 1 for example). You could also select your favorite channel number in menu 1 CH- 2¡¢Press MENU and VOL+/to select the Tuner menu £¬then press CH+/- to enter. 3¡¢Press CH+/- to move to Skip. Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio 4. Press VOL+/- button to set it On. CH- PC Time 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio MENU Func Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange CH+ VOL- Tuner VOL+ Tuner Func PC Time 5. Press MENU button to close the menu. When you select channels with CH+/- button, this channel will be skipped. However, you can also use the Direct-digit Choosing button on the remote control to select this channel directly. And the channel number will be in red. If you want to recover the skipped channel 1. Use Direct-digit choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press VOL+/- button to set Skip Off. 14 Tuning(continued) The function of channel exchange will enable you to exchange any two programs and you can conveniently adjust the order of the programs due to your own need. Channel exchange and edit Channel Exchange (For example, to change between channel 6 and 9 ) 1、Press MENU and VOL+/to select the Tuner menu, then press CH+/- to enter。 CH+ VOL- MENU VOL+ 2、Press CH+/- and move to Exchange Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C Picture Audio CH- Tuner Func PC Time 3、Press VOL+ to enter the submenu. 4、Press CH+/- to move to Exchange Prog. then press direct-digit to set the channel you want to exchanged to 6. And then press OK to confirm OK Current Prog. 009 Exchange Prog. 006 Exchange >>> A B C Picture Audio Tuner Func PC Time 5、Press CH+/- button, move to Exchange,then press VOL+ button to confirm.Then the programs of the two channel will be exchanged. Program edit function This function can enable you to rename your favorite channel 1、Press MENU and VOL+/- to select the Tuner menu,then press CH+/- to enter. CH+ VOL- MENU VOL+ 2、Press CH+/- to select Prog.,Press VOL+/- to set the channel number Prog. Color Sys. Sound Sys. Skip Prog.Name Search Set Auto Search Exchange 0 PAL DK Off ---->>> >>> >>> A B C CH- Picture Audio Tuner Func PC Time 3、Press CH+/- to select Prog.Name,and press VOL+/to select the position you want to adjust , then press CH+/- to select among "A-Z","0-9" ,"、" ,"-" and blank . 4、After the operation, just press OK to confirm 15 Adjusting the Picture Multiple picture modes How to select the picture mode You may select the mode you want from the three preset modes and one individual mode. Press the PSM button to select a mode you like. STANDARD, SOFTNESS,USER and BTIGHTNESS totally four picture modes can be selected alternately. PSM PICTURE QUALITY MODE STANDARD MEDIUM COLOR AND BRIGHTNESS SOFTNESS LOW COLOR AND BRIGHTNESS USER SET BY YOURSELF BRIGHTNESS BRIGHT COLOR Set the parameter of USER You could set it just by your favorite 1、Press MENU and CH+/- to CH+ enter Picture menu。 VOL- MENU CH- Brightness Contrast Saturation Hue Sharpness Color Temp. VOL+ 2. Press CH+/- button, move to the option you want to adjust, then press VOL+/- button to do the adjustment . Then the parameter will be automatically stored in USER option. A B C Picture Audio VOL+ VOL- Brightness BRIGHT DARK Contrast STRONG WEAK OPTION Tuner THICK LIGHT GREEN PURPLE Sharpness SHARP SOFT Color Temp. Std-Cool-Warm Saturation Hue Note:Hue only available in NTSC system. 16 50 50 50 50 50 Std Func PC Time Adjusting the Sound Multiple Sound Modes How to select the sound mode You may select the mode you want from the four preset modes and one individual mode. Press the .SSM button to select the sound quality that you want. Mode S SM Sound quality FILM Theater sound NEWS Clear MUSIC For Music STANDARD Standard sound USER For your convenient to set Setting the parameter of USER You could set the parameter if you select USER mode. CH+ VOL- MENU CH- VOL+ 1、Press MENU and VOL+/to select Audio menu, then press CH+/- to enter Bass Treble Balance Surround SubWoofer Switch SubWoofer AVL 50 50 50 Off Off 50 Off 2. Press CH+/- button, move to the option you want to adjust, then press VOL+/- button to do the Picture Audio Tuner Func PC Time adjustment. Note:SubWoofer can only be adjusted when SubWoofer Switch is A B C set On, SubWoofer and SubWoofer Switch is not available in L26A9-AK. OPTION VOL- Bass Decrease Increase Treble Decrease Increase Balance VOL+ Decrease right channel Decrease left channel OPTION Select On Surround Stereo sound SubWoofer Switch Enhance the effect 17 Adjusting the Sound (continued) Sound limit and mute Sound limit 1、Press MENU to display the menu. CH+ VOL- MENU VOL+ Bass Treble Balance Surround SubWoofer Switch SubWoofer AVL 2、Press VOL+/- to select Audio menu。 50 50 50 Off Off 50 Off A CH- B C Picture Audio Tuner Func PC Time 3、Press CH+/- to enter it . 4、Press CH+/- to select AVL . Bass Treble Balance Surround SubWoofer Switch SubWoofer AVL 5、press VOL+/- button to adjust the parameter you expect or set Picture On or Off. 50 50 50 Off Off 50 Off A B C Audio Tuner Func PC Time How to use the MUTE function MUTE When you want to pay attention to the environment or answer a telephone, or to meet guests, using the mute function is very convenient. X 1、Press MUTE button, a sign will appear at the top right corner of the screen, and the sound of the TV set is cut off. 2.In order to recover the sound, press MUTE button again or press VOL+button. Note: If you have pressed VOL- button in the condition of the mute mode, the value of the volume would decrease, but the sound of the TV is still in mute mode. 18 Setting the Timer This TV set provides you with three timer functions such as timer on, timer off and On Prog. The basic unit of the time in the menu is minute. The Clock will recover to 0£º00 and the On Prog. will recover to 0 when switch the TV on after off. Setting the Clock and timer on/off Setting the Clock You should check whether the Clock is the same with the standard time of the area you are being in; if not, please adjust it as follows CH+ VOL- MENU VOL+ CH- 1、Press MENU and VOL+/- to select Time menu。 2.Press CH+/- to move to Clock and press VOL+ to enter the digital position you want to adjust, then press CH+/- to adjust the value OK Clock Off Time Off Time On Time On Time On Prog. 0:00 Off 0:00 Off 0:00 0 A B C Picture Audio Tuner Func PC Time 3.After the setting, press OK to confirm Timer on/off When timer on function is used, the TV set can automatically turn the power on at the preset time in the standby status and display the preset program.Using timer off function can turn the TV set automatically into standby status at the preconcerted time. 1、Press MENU and VOL+/- to select Time menu. CH+ VOL- MENU CH- VOL+ Clock Off Time Off Time On Time On Time On Prog. 2、Press CH+/- to move to On Time, Press VOL+ to enter the digit position,and then press CH+/- to adjust the value (eg.18:00) 。 Picture 0:00 Off 0:00 Off 0:00 0 A B C Audio Tuner Func PC Time Same as step 2 of Clock setting . 3.Press CH+/- to move to Off Time,then press VOL+/- to set on 4、Repeat steps 1 and 2 to set Off Time(eg.23:00)。 19 Clock Off Time Off Time On Time On Time On Prog. 0:00 Off 0:00 Off 0:00 0 A B C Picture Audio Tuner Func PC Time Setting the Timer (continued) On Prog. On Prog. Using this function ,the TV set can display the preset program automatically when the TV set is turned on. CH+ VOL- MENU CH- 1、Press MENU to display the menu. VOL+ 2、Press VOL+/- to select Time menu. Clock Off Time Off Time On Time On Time On Prog. 0:00 Off 0:00 Off 0:00 0 A 3、Press CH+/- to move to On Prog. 4.Press VOL+/- button to set the channel number you want (eg. 18) B C Picture Audio Tuner Func Clock Off Time Off Time On Time On Time On Prog. PC Time 0:00 Off 0:00 Off 0:00 0 A B C Picture Audio 20 Tuner Func PC Time Setting the Function Language and the OSD position How to select the language on the screen 1.Press MENU and VOL+/to select the Func menu. CH+ VOL- MENU VOL+ 2.Press CH+/- button, move to OSD Language. OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C CH- Picture Audio Tuner Func PC Time 3.press VOL+/-button to select the language and the menu on the screen will be displayed with the language you select. How to select the OSD position Using this function,you could select the position of the OSD on the screen you want. 1.Press MENU and VOL+/- to select the Func menu . 2.Press CH+/-, move to OSD Position . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio Tuner Func PC Time CH+ VOL- MENU VOL+ 3.Press VOL+/- to enter submenu of the OSD Position . OSD H-Position 50 OSD V-Position 50 CH- 4.Press CH+/- to select the item Picture Audio you want to adjust, and then press VOL+/- to adjust. After all, press MENU to back to the main menu. 21 A B C Tuner Func PC Time Setting the Function (continued) Menu timeout and menu background option 基 本 操 作 Menu timeout option If time you set in OSD menu expires after the latest press, the menu will disappear automatically 1.Press MENU and VOL+/- to select the Func menu . CH+ VOL- MENU VOL+ 2.Press CH+/- and move to OSD Timer . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio Tuner Func PC Time CH- 3.Press VOL+/- to select the time Note: the basic unit of the OSD Timer is second。 Menu background option 1.Press MENU and VOL+/- to select the Func menu . 2.Press CH+/- to move to Transparency . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio Tuner Func PC Time CH+ VOL- MENU CH- VOL+ 3.Press VOL+/- to adjust the value you want. You could press MENU to back to the main menu. OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio 22 Tuner Func PC Time Setting the Function (continued) PIP PIP Using this function,you could adjust the H-POSITION , V-POSITION and the size of the PIP. 1.Press MENU and VOL+/- to select the Func menu . CH+ VOL- MENU VOL+ 2.Press CH+/- and move to PIP . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio CH- 3.Press VOL+/- to enter the submenu of PIP . 4.Press CH+/- to select the item you want to adjust ,then press VOL+/- to adjust. After this ,you could press MENU to back to the main menu. Tuner Func PIP Size PC Time Off PIP Source VGA PIP H-POS 100 PIP V-POS 100 A B C Picture Audio Tuner Func PC Time Note:Press source buttons(eg.TV/AV)to change the main input; The signal of PIP can be changed in the submenu of PIP . Child Lock If Child Lock is set On,the keys on the TV will be locked that means you could not operation the TV with these buttons. CH+ VOL- MENU CH- VOL+ 1.Press MENU and VOL+/- to select the Func menu . 2.Press CH+/- and move to Child Lock . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C Picture Audio Tuner Func PC Time 3.Press VOL+/- to set On or Off. You could press MENU to back to the main menu. 23 Setting the Function (continued) De-interlace De-interlace Using this function,you could improve the effect of the picture. 1.Press MENU and VOL+/- to select the Func menu. CH+ VOL- MENU VOL+ 2.Press CH+/- and move to De-interlace . OSD Position OSD Timer OSD Language PIP Transparency De-interlace Child Lock >>> 60S English >>> 0 >>> Off A B C CH- Picture Audio 3.Press VOL+/- to enter the submenu 4.Press CH+/- to select the item you want to adjust, then press VOL+/- to adjust it . Tuner Func MOTION PC Time Medium FILM MODE Off LADI On A B C Picture Audio MOTION Tuner Func Time To decrease the blur of the motorial image FILM MODE To improve the image while filming LADI PC To decrease the sawtooth 24 PC Setup PC setup PC setup You could adjust the correlative item if you use this set as a monitor 1.Press MENU and VOL+/- to select the PC menu . CH+ VOL- MENU VOL+ >>> Auto Clock Phase H_Position V_Position I/P Info. 2.Press CH+/- and move to the item you want to adjust 0 0 0 0 VGA A B C CH- Picture Audio Tuner Func PC Time 3.Press VOL+/- to adjust the item or enter its submenu(according the item setting) 4.If enter the submenu ,press CH+/- and move to the item you want to adjust , and then press VOL+/- to adjust. Then you could press MENU to back to the main menu. 25 Setting the other Function Picture still,sleep timer and program edit Picture still You could press STILL button to “freeze-frame”the current screen. And press the button again to continue playing STILL Freeze Sleep timer SLEEP Using this function, the TV set can be changed into the standby status after a period of preset time from when this function is activated. Program edit CH.EDIT CH+ VOL- MENU CH- VOL+ 1.Press CH.EDIT button to display the current program diagram 2.There are ten channels per page. You could select the channel on this page with CH+/-, also, you could press VOL+/- to turn to the other page , you could press CH+/- to select the channel you want to watch, then press OK to confirm. Press CH.EDIT or MENU to exit. Prog. Prog.Name 0 1 2 3 4 5 6 7 8 9 QTV-1 CCTV1 CCTV2 CCTV3 CCTV4 CCTV5 CCTV6 CCTV7 CCTV8 CCTV9 3. You could see every channel¡¯s name by the program edit function. It is very convenient for you to watch the program you want. Note: The program name can not be more than five letters 26 Stream Media Broadcast System Stream media play prepare are used for internal files. This television can only play some AVI and MPG files of this format. Those files with suffix of dat are not movie files, but data files used by computers, and cannot be played for movies. 5.External card reader supports most digital cards available in the market. Readable digital cards are classified according to the property of card readers and can be connected to mobile hard disks (working voltage 5.0V, working current not over 500mA). 6. Some time the television operation may be halted due to excessive rate of information code errors. In such case, restart the system. As there are many nonstandard USB mobile devices in the market. If this kind of USB mobile devices are used in the stream media play system, the problem of identification failure might occur. The same problem may also happen with computers, not televisions. 7.It is suggested that the external devices with USB2.0 interface be used to improve velocity of information reading and continuity of information play. 1. Supporting equipment 1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2.Equipment supporting PTP agreement includes some digital camera. 2. 1 Supporting media: picture, music, MPEG4, MPEG2 and MPEG1; Supporting file format£º *.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WHA, *.JPG and *.JPEG. Due to particularity of file code and file mode, It is possible that some files cannot be read. 2 If Pic & Music mode is activated, relative media file format will include JPEG and MP3 files. After Picture is selected, MP3 files set for play will open both music and picture files for sync play performance. As some files must be read while music is being played, the speed of picture operation response might be affected. 3.Before starting operation, verify USB storage device is of FAT32 and FAT file system format. At present, this television does not support NTFS and the file systems of other format. 4.Many movie files use suffix of AVI and MPG. However, many kinds of format 27 Stream Media Broadcast System Stream media system setup Note: Memory cards or USB devices are not supplied with this TV. USB setup AAA Multimedia Player 1 Insert USB in the card slots at the left side the TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter the stream media system. Card USB File Copy SETUP CARD setup Remove USB This TV is compatible with the card of SD/MMC/CF/MS/SM format. Press ENTER key to play this devices How to use 1、Jack of card Instructions: Jack of SM card Jacks of SD、MMC、MS card } Jack 1 } Jack 2 Note 1.Please note chooses uses the digital memory card with you corresponds the receptacle 2.Card reader in 1 cannot simultaneously insert two kind of cards in the graphical representation position Jack of CF card 2、Insert the card as right direction. As following Card in common use 1)CF card: 2)MMC card: (jack) (jack) 4)SM card: (jack) 5)SD card: (jack) 128 MB M EMORY S TICK MB 128 MB CARD DIGITAL MEMORY CARD 128 (jack) M ULTIM EDIA C OMPACT F LASH 3)MS card: ID 128MB SD 128MB Note: 1.the card insertion time, after the flows media system starts 2s , insert the card to numerical code card reader , do not bring card to start flow media system. 2. After card insertion, indicator light will shines, and enters glitters condition, after period of time , indicator light enters constant bright condition, indicates already distinguishes finished, this time carries on play operation and so on . 3, In the market ,the digital card type are very many, please uses standard product of the standard factory , meets reads takes difficult or reads speed limits, please replaces the digital card. 28 Stream Media Broadcast System Removing USB device ý 1 Press up¡ or down ü to select¡Remove USB, and press ENTER button to ensure it. 2 press RETURN button to exit menu. 3 Remove the memory card/USB device. 4 If to remove the card device, press RETURN button to return to the main menu, and remove the card. AAA Multimedia Player Card USB File Copy SETUP Remove USB Press ENTER key to remove USB devices Card data protection - Do not remove the card/USB device when the content is being read or when browsing. Such action may damage the memory card/USB device. - Do not touch the terminals on the back of the card. - Always insert a card in the correct direction. Failure to do so may result in damage to the card and the unit. - Do not subject the card to excessive pressure or strong impacts. - Malfunctions of the unit or card may result in data loss or damage to the card. - Haier shall not accept any liability for damage or loss of stored data. Warning: Memory cards can be swallowed by young children. Do not allow children to handle memory cards. Please remove the memory card immediately after use. 29 Stream Media Broadcast System To start the media play 1. Press USB button to enter media play system. 2. Press up¡ or downü button ¡ to select the desired option. 3. Press ENTER button to enter desired option. ý AAA Multimedia Player Card USB File Copy SETUP 4. Press RETURN to return the previous menu. Remove USB Press ENTER key to play this devices USB RETURN ENTER ZOOM 5. If to exit USB system, you need to return to the main menu to protection card data. HELP Note: If there are no operation two minute later, the TV will enter the saver automatically, at the time, press any button of USB system to exit the saver menu. To operate the menu 1. Press up↑ or down↓ 2、Press or with left or right. to select the item with up or down. to select the desired item of submenu 3、Press ENTER button to ensure the desired option、to enter the submenu、to resume the speed of standard. 4. Press or button to operate play quickly or slowly. 5.Press pause button to make the program stop,and press again to resume it. 6.Press ZOOM button to make zoom, and press or ↑ ↓/ button to enjoy the detail. or 7、Press HELP button to call up or exit the OSD information. And press HELP button to call up or exit the OSD during operating file copy. 8、press RETURN button to return to previous menu and stop play, press RETURN button repeatedly to return to main menu. 30 Stream Media Broadcast System To select stream media broadcast system 1.Press up↑ or down↓ button to select "Card"or "USB". (The device be inserted and identified). 2. Press ENTER button to enter adjusted option. USB RETURN ENTER ZOOM HELP AAA Multimedia Player Card USB File Copy SETUP Remove USB Press ENTER key to play this devices To play picture AAA Multimedia Player 1. Press up↑ or down↓ button to select Picture item. 2. Press ENTER button to enter the menu of play. 3. Press again up↑ or down↓ button to select desired enjoy picture, and then press ENTER button to enter the play menu. 4. On screen display, Press ↑ or ↓ to select the speed of play.(Normal, Slow, Fast). 5. Press or button to swap the picture of next and previous. Press RETURN button to return. Picture Movie Music Music and Pic AAA Multimedia Player F-007 F-008 F-009 F-010 F-011 F-012 JPEG .JPG .JPG .JPG .JPG .JPG .JPG Play 0016.JPG Slideshow speed :Slow IMAGE To enjoy the picture detail Note: the play file menu are different with your USB devices. 1. After selecting the picture to play, press ZOOM to select desired zoom. 2. Press HELP button to exit the display, and then press ¡ or ü or¡ or ý to move and enjoy the picture detail. To make the picture overturn Each press of button to make overturn 900 with right, press ENTER button to resume the program playing. 31 Stream Media Broadcast System To enjoy music 1. Press up↑ or down↓ button to select "Music" option. USB AAA Multimedia Player 2. Press ENTER button to enter play menu. Picture Movie RETURN ENTER ZOOM HELP Music Music and Pic 3. Press up↑ or down↓ button to select desired music, and then press ENTER button to play music. AAA Multimedia Player Note: The play file menu are different with your USB device. 4. When playing music, press up↑ or down↓ to select play mode, (play mode: standard, program, Random; Repeat mode: Disc Repeat, Folder Repeat, File Repeat) and press ENTER button to ensure the mode. USB RETURN ENTER ZOOM HELP The day went away .MP3 The day you went away.MP3 Play mode:standard 5. When playing music, press 01£º07 / 04 £º20 or button to swap the next and previous music 6. Press RETURN button to exit the playing. Note: 1. DISC Repeat mode: press up↑ or down↓ button, the DISC Repeat will appear on the screen, and then press 1:__ 2:__ ENTER to ensure it. 3:__ 2. Program mode: 4:__ 5:__ press ↑ or↓ button to select Done the music in right list, and press ENTER button to program in turn, and then press button to select "Done", and then press ENTER button to ensure it. The day went .MP3 Soft .MP3 Soft .MP3 32 The day went .MP3 Stream Media Broadcast System To play Movie 1. Press up↑ or down↓ select "Movie" option. button to AAA Multimedia Player USB RETURN ENTER ZOOM 2. Press ENTER to enter play menu. Picture Movie Music HELP 3. Press again up↑ or down↓ button to select desired music, and press again ENTER button to play it. Music and Pic AAA Multimedia Player 4. On screen display, press or button to select in turn: File*-PlayBack Control-Audio channel-Play Mode 5. Press or button to set speed, press ENTER button to resume to standard mode. USB RETURN ENTER ZOOM 6. Press or button to select the next movie or previous. HELP 7. Press RETURN button repeatedly to return. 33 E08-8SOBTILES-1 Stream Media Broadcast System To select the Music and PIC item USB RETURN ENTER ZOOM HELP 1. Press up↑ or down↓ button to select "Music and Pic" option, and press ENTER button to enter menu. AAA Multimedia Player Picture 2. Press up↑ or down↓ to select desired file, and press button to ensure it. ( to cancel). Repeat step 2 to select more file, and press ENTER button to enter play menu. Movie Music Music and Pic AAA Multimedia Player F-007 F-008 F-009 F-010 F-011 F-012 3. On screen display menu, press up↑ or down↓ to select the speed to play.( Normal, Slow, Fast). MP3 4. Press or button to swap the next and previous picture, press or button to select the music. The day you went away .MP3 JPEG 0016.JPG Play mode:standard USB RETURN ENTER ZOOM Note: press pause button to stop playing the picture. HELP 5. Press repeatedly RETURN button to return. Note: On the music and picture, the playing music is *.mp3 format. 34 .JPG .JPG .JPG .JPG .JPG .JPG Play 00:01:43 IMAGE Stream Media Broadcast System Copy file function 1. Press up↑ or down↓ "File Copy" item. to select AAA Multimedia Player USB 2. Press ENTER button to enter the copy menu. Card USB File Copy RETURN ENTER ZOOM HELP 3. Press ENTER button to enter the file menu, and press up↑ or down↓ button to select "Card" or "USB"。 SETUP Remove USB Press ENTER key to enter COPY menu Select source Port: Card USB 4. Press ENTER button to enter Card or USB, and select the files to copy, then press HELP button to call up COPY and PASTE, and then press ↑ ↓/ button to select COPY, and press ENTER button to confirm, press again ↑ ↓/ button to select PASTE, then press ENTER button to paste, in this time, the "File already exits, overwrite it?"will appears on the screen, and press or button to select YES/NO, and then press ENTER button to confirm. 5. Press ENTER to cancel. Note: button to select the all files; button to cancel. 35 Root F-007 F-008 F-009 F-010 F-011 F-012 .JPG .JPG .JPG .JPG .JPG .JPG Root F-007 F-008 F-009 F-010 F-011 F-012 .JPG .JPG .JPG .JPG .JPG .JPG COPY PASTE Connecting Additional Equipments Antenna connection Generally speaking,to enjoy a clearer picture.We reconmmend that you use a CATV system or an outdoor antenna.In different places, the suitable antenna type and position are different. VHF UHF Mixer £¨additional purchase£© Antenna input standard coaxial type£© ANT. £¨75 AC cable 300 AC power socket twin-lead cable + + Antenna adapter £¨additional purchase£© 75 coaxial cable Plug £¨additional purchase£© Note£º It is recommended that you had better use 75 ¦¸coaxial to remove the disturbance caused by airwave. Do not lay the twin-lead cable under the TV set. You need the suitable coaxial cable. and plug to receive the best picture and sound. 36 Connecting Additional Equipments Some additional equipments could connect with this set. There is some description about this following. You could check the input after the connection. DISPLAY I/II STILL MUTE PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI TV/AV:All source inputs Q.VIEW OK CH+ VOL- VOL+ MENU S-VIDEO:S-VIDEO input CHS SM PSM 1 DVD/DTV:YUV input 4 5 6 7 8 9 0 ZOOM/MOVE -/-PIP 3 2 SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP PC/DVI:PC and DVI input USB RETURN ENTER ZOOM HELP Note: You could also use the TV/AV button on the front panel of the TV to change the inputs How to connect the signal with other equipments Output signal PC/DVI AUDIO IN POWER R-AUDIO-L OUT WOOFER D-SUB IN S-VIDEO IN VIDEO IN Y Cb/Pb Cr/Pr DVI IN R-AUDIO-L OUT VIDEO OUT L - HD- R IN ANT. L -V/S- R IN VCR R-AUDIO-L OUT VIDEO OUT Video output TV Audio output 37 Connecting Additional Equipments How to connect the video input terminal Output signal PC/DVI AUDIO IN POWER R-AUDIO-L OUT D-SUB IN WOOFER S-VIDEO IN VIDEO IN Y Cb/Pb Cr/Pr DVI IN R-AUDIO-L OUT VIDEO OUT L - HD- R IN VC R S-VIDEO IN S-VI D E O V C R ANT. L -V/S- R IN L -V/S- R IN VIDEO IN S-VIDEO output Video output DVD Player Audio output How to connect the component input terminal Output signal PC/DVI AUDIO IN POWER R-AUDIO-L OUT D-SUB IN WOOFER VCR VIDEO IN Y Cb/Pb Cr/Pr DVI IN R-AUDIO-L OUT Y Y DVD digital box (DTV-STB) S-VIDEO IN Y、Pb,Pr output Pb Pr Video output 38 VIDEO OUT L - HD- R IN Cb/Pb L -V/S- R IN Cr/Pr L - HD- R IN ANT. Connecting Additional Equipments How to connect the PC input terminal PC/DVI AUDIO IN POWER R-AUDIO-L OUT WOOFER D-SUB IN S-VIDEO IN VIDEO IN Y Cb/Pb Cr/Pr DVI IN R-AUDIO-L OUT L - HD- R IN VIDEO OUT PC/DVI AUDIO IN D-SUB IN DVI IN Note: The computer above is just an example The other equipments and coaxial are not included in the TV set PC input terminal is the DDC1/2B. If the computer is not provide with DDC1/2B,you should adjust it when connecting. Some models of PC can not be connected with this TV set The D-sub 15P terminal of DOS/V need not adapter for the computer The H/V scan frequence can not exceed the regulate range. 39 L -V/S- R IN ANT. Connecting Additional Equipments External speaker installation 1. Face the LCD screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. Lay the two speaker aside of the LCD. 2. Lay a bracket on the speaker and hind External speaker rind, Fix 4 screws to the speaker and hind rind. 3. Connect the speaker cable to the speaker terminal of LCD TV and the speaker terminal, and insert the connecting cable into the terminal slot, Release the speaker terminal, and ensure that the white connecting cable is inserted in the terminal slot marked red and black connecting cable is inserted in the black terminal slot, and that anode and cathode poles are correctly connected. Screw hole Note:It is not suitable for L26A9-AK Woofer installation 1. Take the woofer out, and place it the hind rind. (See picture) 2. Connect cable to the woofer terminal and LCD TV terminal. Woofer Note:It is not suitable for L26A9-AK 40 Troubleshooting Determine and try to solve the problems of your television by yourself before applying for technical assistance by authorized after-sales service. Do not leave the television with static picture in an extended period as it may result in residual image on your television screen. Troubleshooting No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press Mute button and verify if Mute mode is set. Switch to other channel and verify if the same problem happens. Press VOL+ button to see if the problem can be solved. Poor sound Verify if sound system is correct. Refer to some chapter for adjust. No picture in some channel Verify if correct channel is selected. Adjust the antenna. Make adjustments by Fine Tune and Manual Search. Verify if the same problem exists in other channels. No color for some channel Check out of picture and sound systems. program (black and white) Refer to relative instructions in the Manual for color adjust. Spots with some or all pictures Television out of control Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Make fine adjustment of channel. Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance. Note£º Design and specifications are subject to change without notice. The dimension in this manual is a approximation. 41 Specification Following are some reference specifications, which may vary from that of the television that you have just purchased due to technical innovations. Model Power Power consumption LCD screen ~150V-240V£¬50/60Hz Average£º180W standby consumption£º<3W size£º37.02 inch (94.03cm) viewing angel£º>170¡ã Condition NTSC 3.58 NTSC 4.43 PAL 50£¬PAL 60 Average£º140W standby consumption£º<3W size£º26 inch (66.03cm) viewing angel£º>170¡ã TV PAL£¬DK£¬I£¬BG System L26A9-AK L37A9-AK/L37A9-AKF } Video Working temperature 5¡ æ - 35¡æ Working humidity 20£¥ -80£¥ Store temperature -25¡æ - 45¡æ Store humidity 5 £¥ - 9 0£ ¥ Connection terminal Dimensions (WXDXH) Video (RCA) 1.0Vp-p (75ohm) S-video(Mini D2N4£© Y1.0Vp-p (75ohm) C 0.286Vp-p(75ohm) Audio L-R(RCAX2£© 0.5Vrms Y 1.0Vp-p PbPr ¡À0.35Vp-p VGA Analog RGB 0.7Vp-p;75ohm,TTL DVI DVI-D USB 2.0 1151mmX124mmX664mm User's Manual Remote control Accessory Electric cord Warranty card External speaker Woofer 861mmX300mmX526mm (stand including) User's Manual Remote control Electric cord Warranty card Design and specifications contained in the manual might vary due to technical innovations. Warranty card is only for the special countries and areas. 42 Specification(continued) DVI supporting Input mode 640x480 800x600 1024x768 Refurbish frequency(Hz) 60 60 , 75 60 , 75 Remark / PC supporting Resolution 640x480 800x600 1024x768 1600x1200 Vertical(Hz) Horizontal(KHz) 60 31.5 75 37.5 60 37.9 75 46.9 60 48.4 75 60.0 60 75.0 43 Clock(MHz) 25.2 31.5 40.0 49.5 65.0 78.75 162.0 01 0090507703
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 47 Create Date : 2006:04:10 20:41:11 Modify Date : 2006:04:10 20:41:11 Producer : Corel PDF Engine Version 10.427 Author : HaierRen Creator : CorelDRAW 版本 10.0 Title : L37A9-AK-1501英文-7703更换688EXIF Metadata provided by EXIF.tools