Hanbit Electronics HSD329TN USB STORAGE DEVICE User Manual HSD329TN Manual Eng 031001

Hanbit Electronics Co., LTD. USB STORAGE DEVICE HSD329TN Manual Eng 031001

UserManual.wiki >

Hanbit Electronics >

HSD329TN User Manual HTML Version

USERS MANUAL

Hanbit Electronics Co., Ltd

http://www.hbe.co.kr

USER’S MANUAL

Model : HSD329TN

Rev.5.0, 2003-09-03 Page 2/2 www.hbe.co.kr

Contents

Package Contains ------------------

Page 3

Locations and Function ------------------

Page 3

XDRUM

Stick ------------------

Page 4

* Key lock ------------------

Page 6

Windows98 Install ------------------

Page 7

Utility program ------------------

Page 9

* Password Set and Change

------------------

Page 11

* Boot Up function ------------------

Page 13

USB2.0 XDRUM

Stick ------------------

Page 16

Important Notice ------------------

Page 17

A/S and Cautions ------------------

Page 18

9, Guarantee ------------------

Page 19

Rev.5.0, 2003-09-03 Page 3/3 www.hbe.co.kr

■ Package Contains

※ Please check Package Contains in Box

■ Location and Function

─ Cap : USB Connector protect cap

─ LED : Lighting on operation

─ Write Protect Switch : Change switch to direction

─ Neck strap jack

─ USB Connector : USB Port connect part

1. USB2.0 XDRUM

Stick 1pcs 4. Extra cap 1pcs(option)

2. USB extension cable 1pcs(option)

5. CD Drive 1pcs(option)

3. Neck strap 1pcs(option) 6. Manual 1pcs(option)

Cap

LED

USB Connector

Neck Strap

Write Protect Switch

LED

Rev.5.0, 2003-09-03 Page 4/4 www.hbe.co.kr

■ How to Use the USB2.0 XDRUM

Stick

You can use the USB2.0 XDRUM N Stick right away simply by inserting it in the

USB port of your PC. (WindowsME/2000/XP and beyond, excluding

Windows98/SE, will automatically recognize the USB2.0 XDRUM N Stick)

For users with Windows98/SE O/S, the Windows98/SE driver must first be

installed. Please refer to page 7 for driver installation.

Should you wish to use the security or partition functions, install the USB2.0

XDRUM N Stick.EXE program. Please refer to page 9.

For more information about USB, visit http://www.usb.org.faq/.

■ How to Use the USB2.0 XDRUM

Stick with Windows

When you insert the USB2.0

XDRUM N Stick in your USB port,

Windows will automatically

recognize it as a “portable storage device” and designate the drive accordingly.

Go to “My Computer”, and the [portable disk] icon will appear.

When the [safe hardware removal] icon is displayed on the [task bar], you can

double-click it to remove the device safely.

Rev.5.0, 2003-09-03 Page 5/5 www.hbe.co.kr

To confirm whether the device is installed properly, choose “Start-> Settings->

Control Panel-> System-> Hardware”,

then double-click on the device manager

to display the [Universal Serial Bus] icon.

Double-click that icon to see if the “USB

mass storage device” is installed.

It is recommended to use

USB2.0 XDRUM N Stick

compatibly with “Hi-Speed

USB 2.0”. If you connect the

USB2.0 XDRUM N Stick to a

“non Hi-Speed USB 2.0 Hub”, Windows will display a warning message as

shown below. You may use the device without changing any settings, but

reading/writing speed will slow down.

Remove the USB2.0 XDRUM N Stick

In order to remove the device safely,

double-click the [safe hardware removal]

icon, remove device, then choose “Stop->

OK-> OK-> Close”.

Rev.5.0, 2003-09-03 Page 6/6 www.hbe.co.kr

Note: Whenever you remove a device

without executing safe removal, a

warning message that the “computer

may stop responding, or you may lose

data” will be displayed. Do not remove

the device when the LED is flashing

since this indicates that reading or

writing is active. Remove the device

safely after the LED turns off.

Write-Protect Function

◈ Write-protect tab is located at the lower part of XDRUM N Stick.

◈ Open (when tab is slid up): you can freely read and write.

◈ Locked (when tab is pushed down): you can read, but cannot write.

Note: If you change the setting of the tab when the device is not connected to

the computer, it may cause the loss of data.

Rev.5.0, 2003-09-03 Page 7/7 www.hbe.co.kr

■ How to Install the USB2.0 XDRUM

Stick with Windows98

1) Double-click and

execute “XDRUM N Stick

Win98 Driver2.0. EXE”

from the CD, and then

choose “Next” when the

“Installation Manager” file

appears as follows.

2) When given options to

make a new directory

during installation, choose

“Yes” and click “Next”.

Rev.5.0, 2003-09-03 Page 8/8 www.hbe.co.kr

3) After the UBS XDRUM N

Stick is installed, click

“OK” to finish installation.

4) When the UBS N Stick

is connected to a UBS

port, the computer will

automatically locate

software for the new

device. Simply find the

drive where your UBS N

Stick is connected and

use it.

Rev.5.0, 2003-09-03 Page 9/9 www.hbe.co.kr

■ How to Use the XDRUM

Stick Utility Program

The XDRUM N Stick provides functions such as password protection, partitioning,

and booting setup alteration.

How to Install the XDRUM N

Stick Utility Program

Follow the installation guide:

1. Execute “XDRUM N

Stick.EXE” from the driver

CD enclosed with the

product.

2. When the Installation

Wizard appears, click

[Next>].

3. Installation Wizard begins

to copy and install required files

and programs. Click “Yes”, and

then “Next”.

Rev.5.0, 2003-09-03 Page 10/10 www.hbe.co.kr

4. Clicking on “OK”, to

completes installation of the

utility program.

5. Check if the [XDRUM N

Stick] folder is displayed in the

[program] folder of the [Start]

menu.

Note: When the “XDRUM N Stick” is inserted into the USB port, a key-shaped

program execution icon will appear in the lower right corner of the

startup screen. Click that icon to execute the utility program.

Rev.5.0, 2003-09-03 Page 11/11 www.hbe.co.kr

■

How to Use the XDRUM N Stick Utility Program

Set/Check Password

The XDRUM N Stick allows the setting or alteration of a [password]. In order to

set a password for the first time, choose “resize” as displayed in the following

picture. If a password is already set, a message will appear advising you to enter

that password. If you want to alter the password, follow this procedure.

1. Double-click the key-shaped icon on the tray bar in the lower right corner of

the startup screen to execute the XDRUM N Stick utility.

2. To enter secure mode, select “Public Area + Security Area”, enter the

password you wish to use in the “New Password” box, then click “OK”.

Rev.5.0, 2003-09-03 Page 12/12 www.hbe.co.kr

3. When you connect the “XDRUM

N Stick” with a password set, a

key shape will be displayed in

red on the tray bar.

4. To use the XDRUM N

Stick after setting the

password, enter the

appropriate password

in the “password” box,

and clock “OK”. (To

quit using secure

mode, click “logout”,

then “OK”, to go to

the public area.)

Change Password

A function of altering the

XDRUM N Stick password.

First, enter the existing

password, and then a new

one. For confirmation, enter

the new password two times.

Rev.5.0, 2003-09-03 Page 13/13 www.hbe.co.kr

How to Use the Boot Up Function [Copy System File]

This function is used to enable

you to boot your computer with

the USB disk. Choose [Utility],

and the following window will pop

up. USB Flash Disk supports

USB FDD, ZIP or HDD booting

functions. However, you can use

this function only when your PC’s

mainboard supports it.

How to Make a Boot Up Floppy for Win XP [Copy

System File]

1. Click 3.5 Floppy disk (A:) in the Win XP “My

Computer” menu, choose “Format”, then “Make

DOS Starting Disk”, and click “Start”.

Rev.5.0, 2003-09-03 Page 14/14 www.hbe.co.kr

2. Create a new XP_Bootable folder

within the C Drive (System Disk), copy

all files from 3.5 Floppy disk (A:), and

paste them in the new XP_Bootable

folder.

Note: To copy the system file from

3.5 Floppy disk (A:), set all

files and system file as

“view” using folder options

as the following picture

shows, and then click “OK”.

Rev.5.0, 2003-09-03 Page 15/15 www.hbe.co.kr

3. Choose the [Utility]

index from the

XDRUM N Stick utility,

and click “USB ZIP”,

then “OK”.

Note: This function may not be supported depending on the O/S that you

use. When your O/S does not support this function, utility index

window wont be activated. (available only on Win98/XP)

Note: To use this booting function on Win XP, BootDisk folder should be

located at C Drive.

Note: This function is not supported in Windows ME or Windows 2000.

Note: Not all computers support the USB Flash Disk. When your computer

does not support it, contact the PC or mainboard manufacturer. In this

case, you should set a proper [boot sequence] compatible with your

USB Flash Drive in the mainboard BIOS Setup.

Rev.5.0, 2003-09-03 Page 16/16 www.hbe.co.kr

■ USB XDRUM

Stick Specification

Capacity 16, 32, 64, 128, 256, 512MB

Read Performance 56Mbit/sec(Depend on PC mainboard type)

Write Performance 48Mbit/sec(Depend on PC mainboard type)

Available PC IBM PC/Mac..PC System with USB Port

Available O/S Windows 98 / ME / 2000 / XP /

Linux 2.4 or higher, Mac OS 9.0 or Higher

Drive Support Windows98/SE Install driver

Power Supply USB power supply

LED 1 (LED State)

LED fast mode for Transmitting and

Receiving data

LED 2 (LED State) Power State

USB Interface USB2.0 and USB1.1 Compatible

Suspend Current ＜ 350μA ( Max :＜500μA )

Operating Current ＜ 31mA

Operating Temperature 0℃ to 70℃

Storage Temperature -10℃ to 125℃

Dimention 18.5(W)×42.55(H)×4(T)mm(Without CAP)

Security Function and

6type of Software

GUI software installed Password function &

E-mail, PC-Lock, File-Lock, AutoRun,

Time-Lock Soft Ware supported

Booting Disk Function Usable as Booting Disk

Write protect switch Write protect switch supported

Rev.5.0, 2003-09-03 Page 17/17 www.hbe.co.kr

※ How to remove the USB2.0 XDRUM N Stick safely

● All O/S : Unplug the XDRUM N Stick from the USB port after the activating

pointer of mouse is stopped.

● Windows 98 : Do not unplug the XDRUM N Stick from the USB port while its

LED is blinking.

● Windows ME, 2000,XP : Execute hardware separation icon located on the

bottom of the right in the Windows to remove the device safely or unplug it by

using hardware wizard on the control pannel.

The operating system can be discontinued and the data can be damaged when

the device is unplugged before executing the device removed from program

action.

● Mac : Unplug the XDRUM N Stick from the USB port after throwing it away to

the trash box in your computer.

● Linux : Unplug the XDRUM N Stick from the USB port after executing

“Unmount” commend.

Rev.5.0, 2003-09-03 Page 18/18 www.hbe.co.kr

※ Customer Service

· Website : http://www.hbe.co.kr / e-mail : support@hbe.co.kr

· Address : 414-5 Woncheon-Dong, Paldal-Gu, Suwon-City, Kyoungki-Do, Korea

Hanbit Electronics Customer Service team

· Telephone : +82 31 218 1900 / Fax : +82 31 217 1926

※ Caution

· To use your Data safely, Please make back-up file. Because NAND Flash memory chip

has a feature which can write data within 300,000 times.

· All the information in this document is subject to change without prior notice. The

manufacturer does not make any representations or any warranties (implied or

otherwise) regarding the accuracy and completeness of this document and shall in no

event be liable for any loss of profit or any other commercial damage, including but

not limited to special, incidenal, consequential, or other damages.

· No part of this document may be reproduced or transmitted in any form by any means

without the express written permission of the manufacturer.

· All brand names and product names used in this document are trademarks or

registered trademarks of their respective holders.

Rev.5.0, 2003-09-03 Page 19/19 www.hbe.co.kr

Regulatory Information

FCC Compliance Statement

Caution : Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Ÿ Reorient or relocate the receiving antenna.

Ÿ Increase the separation between the equipment and receiver.

Ÿ Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Ÿ Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following

Rev.5.0, 2003-09-03 Page 20/20 www.hbe.co.kr

two conditions: (1) this device may not cause harmful interference, and (2) this device

must

accept any interference received, including interference that may cause undesired

operation.

CE Marking and European Union Compliance

Products intended for sale within the European Union are marked with

the CE Mark which indicates compliance to applicable Directives and

European Normes (EN), as follows. Amendments to these Directives or

Ens are included:

Applicable Directives

Ÿ Electromagnetic Compatibility Directive 89/336/EEC

Applicable Standards

Ÿ EN 55022:1998, Limits and Methods of Measurement of Radio Interference

Characteristics of

Information technology Equipment

Ÿ EN 55024:1998; Information technology equipment-Immunity characteristics Limits

and methods

of measurement.

Rev.5.0, 2003-09-03 Page 21/21 www.hbe.co.kr

Customer Card

Warranty Card

1Year

Limited

Warrenty

Product Name: Model:

Purchasing Data: Customer:

E-mail: Telephone:

Address:

The product purchased is warranted and tested to be free from defects in material and Workmanship

and conform to the published specifications. Hanbit Electronics Co.,Ltd will offer a service for product

Malfunction in the conditions as below.

1. Limited Quality Warranty

1) For a period of one year from the date of purchase.

2) HANBIT Elec. Co., Ltd will repair or replace your product with a comparable product for an defect

occurred by improper workmanship or materials within the warranty period.

3) The target of no compensation service:

The product proved not to pass a period of one year from the date of purchase.

Hanbit Electronics Co., Ltd will charge the cost for malfunction occurred by a negligence,

a mistake, repair and rebuilding in other place no Hanbit ’s agency.

4) Duration of no compensation service is one year.

Compensation service will be offered in a principle as below after one year.

2. Compensation / No compensation Service

1) No compensation Service

A. Content of compensation for damage (within 1 year from purchasing date) :

Need to repair due to a functional defect in the normal state within 10 days after purchasing.

B. Exchange or Repayment : Need to repair for the efficiency or functional defect in the normal

state within 1 month after purchasing.

C. Product Exchange : Occurrence defects until 3 times as the same reason within 1 month.

2) Compensation Service Charge Service

Hanbit Electronics Co.,Ltd can charge a customer the cost to ask for repairs and can refuse the

repairs in the reason as below.

A. Defects of function occurred in product which is exceeded the validity period of quality warranty.

B. The case crushed or cracked by shock.

C. The case destroyed by using a non standardized parts.

D. The case modified by disassembly or remodel ed construction or function.

E. The malfunction occurred by the natural disaster.

F. The Obvious fault occurred by mishandling of purchaseree

※ Note : Exhibit the customer card in order to get the service, This card is not reissued again.

HANBtT Electronics Co.,Ltd. Tel )+82

218

1900 Fax)+82

217

1926 URL:

www.hbe.co.kr

Rev.5.0, 2003-09-03 Page 22/22 www.hbe.co.kr

Rev.5.0, 2003-09-03 Page 23/23 www.hbe.co.kr

Company Registered

HANBiT Electronics Co.,Ltd

Address : 414-5 Woncheon-Dong, Paldal-Gu, Suwon-City, Kyungki-Do, Korea (ZIP 442-823 )

Telephone : +82 (31) - 218 - 1900 / Facsimile : +82 (31) - 217 -1926

E-mail : support@hbe.co.kr

URL : www.hbe.co.kr

Hanbit Electronics HSD329TN USB STORAGE DEVICE User Manual HSD329TN Manual Eng 031001

Hanbit Electronics Co., LTD. USB STORAGE DEVICE HSD329TN Manual Eng 031001

USERS MANUAL

Navigation menu

Namespaces

Views

Navigation