Handlink Technologies WG-701 Wireless Router User Manual Copyright Notice
Handlink Technologies Inc. Wireless Router Copyright Notice
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2371445 |
| Application ID | wMFl4zkylqRCZe7twxINmw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 132.61kB (1657653 bits) |
| Date Submitted | 2014-08-28 00:00:00 |
| Date Available | 2014-08-29 00:00:00 |
| Creation Date | 2014-08-22 17:59:24 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2014-08-22 17:59:24 |
| Document Title | Copyright Notice |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | ariel |
R-300NP Wireless Router User Manual 無線路由器(WIFI) Handlink Handlink Technologies Inc. 6830607-0010G EN V1.0 Copyright Notice Copyright © 2014-2023 Handlink Technologies Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission. Disclaimer We shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. We reserve the right to change the product specification without notice. Information in this document may change without notice. Trademarks Microsoft Win98, Windows 2000 , WinXP, Win Vista and Win7 are registered trademarks of Microsoft Corporation. General: All other brand and product names mentioned herein may be registered trademarks of their respective owners. Customers should ensure that their use of this product does not infringe upon any patent rights. Trademarks mentioned in this publication are used for identification purposes only and are properties of their respective companies. Easy Hotspot Kit Table of Contents Introduction ----------------------------------------------------------------------------------------------------------------- 5 1-1 Package Contents -------------------------------------------------------------------------------------------------------- 5 1-2 Features --------------------------------------------------------------------------------------------------------------------- 5 1-3 Precautions ----------------------------------------------------------------------------------------------------------------- 5 1-4 Outlook----------------------------------------------------------------------------------------------------------------------- 6 1-4-1 Front Panel ------------------------------------------------------------------------------------------------------- 6 1-4-2 Rear Panel-------------------------------------------------------------------------------------------------------- 7 1-5 Technical Specifications ------------------------------------------------------------------------------------------------ 8 1-5-1 Hardware Specifications -------------------------------------------------------------------------------------- 8 1-5-2 Software Specifications --------------------------------------------------------------------------------------10 Installation -----------------------------------------------------------------------------------------------------------------12 2-1 Installation Requirements ----------------------------------------------------------------------------------------------12 2-2 Hardware Setup ----------------------------------------------------------------------------------------------------------13 3. Configuring the R-300NP ----------------------------------------------------------------------------------------------14 3-1 Wizard Setup --------------------------------------------------------------------------------------------------------------14 3-2 Advanced Setup ----------------------------------------------------------------------------------------------------------22 3-2-1 System ------------------------------------------------------------------------------------------------------------23 3-2-2 WAN/LAN --------------------------------------------------------------------------------------------------------25 3-2-3 Server -------------------------------------------------------------------------------------------------------------31 3-2-4 Authentication---------------------------------------------------------------------------------------------------32 3-2-5 Bandwidth--------------------------------------------------------------------------------------------------------32 3-2-6 Filtering -----------------------------------------------------------------------------------------------------------34 3-2-7 Port forwarding -------------------------------------------------------------------------------------------------36 3-2-8 Syslog-------------------------------------------------------------------------------------------------------------36 3-2-9 Session Trace --------------------------------------------------------------------------------------------------40 3-2-10 SNMP -------------------------------------------------------------------------------------------------------------42 3-2-11 Wireless ----------------------------------------------------------------------------------------------------------43 3-2-12 Firewall -----------------------------------------------------------------------------------------------------------47 Easy Hotspot Kit 3-3 System Status ------------------------------------------------------------------------------------------------------------49 3-3-1 System ------------------------------------------------------------------------------------------------------------49 3-3-2 Current User ----------------------------------------------------------------------------------------------------51 3-3-3 DHCP Clients ---------------------------------------------------------------------------------------------------52 3-3-4 Session List -----------------------------------------------------------------------------------------------------52 3-4 System Tools--------------------------------------------------------------------------------------------------------------52 3-4-1 Configuration ----------------------------------------------------------------------------------------------------53 3-4-2 Firmware ---------------------------------------------------------------------------------------------------------54 3-4-3 System Account ------------------------------------------------------------------------------------------------56 3-4-4 PING Command------------------------------------------------------------------------------------------------56 3-4-5 Restart ------------------------------------------------------------------------------------------------------------57 3-4-6 Logout ------------------------------------------------------------------------------------------------------------57 Appendix A Regulations/EMI Compliance -------------------------------------------------------------------------------58 Appendix D LIMITED WARRANTY ----------------------------------------------------------------------------------------60 Easy Hotspot Kit 1 Introduction R-300NP is the best WiFi solution provider for venue owner and its customers. Using our system, the venue owner could be able to provide the free WiFi service that is safe and legally compliant. The Venue Owner can use R-300NP and Coolbee WiFi service to promote the store to customer. 1-1 Package Contents Please inspect your package. The following items should be included: One R-300NP One Power Adapter Two detachable Antennas One Ethernet Cable One Quick Installation Guide One Wi-Fi sticker If any of the above items are damaged or missing, please contact your dealer immediately. 1-2 Features Wireless data rates up to 300Mbps IP Plug and Play (iPnP) Comprehensive security 64/128-bit WEP encryption WPA encryption WPA2 Encryption IP/URL filtering Intelligent Management Note: The "iPnP" Function only can be used with TCP/IP-based Network. 1-3 Precautions Never remove or open the cover. Never install the system in the wet locations. Use only the original fitting power adapter otherwise there is a danger of severe electrical shock. Avoid exposing the R-300NP to direct sunlight or another heat source. Choose a well-ventilated area to position your R-300NP. R-300NP 1-4 Outlook Figure 1 Outlook 1-4-1 Front Panel The front panel of the R-300NP is shown as below. Figure 2 Front Panel LED Indicators LED State Description PWR Off The device is not receiving electrical power. On The device is receiving electrical power. Off The device status is defective. On The device is up and running. SYS R-300NP Blinking During firmware upgrade, the system LED will be blinking. Off The Wireless is not ready. On The device has established a valid wireless connection. Blinking The Wireless connection is active. Off The WAN is not connected. On The WAN has a valid 10/100Mbps network connection. Blinking The WAN is sending or receiving packet. LAN-1~ Off The LAN is not connected. LAN-4 On The LAN has a valid 10/100Mbps network connection. Blinking The LAN is sending or receiving packet. WLAN WAN 1-4-2 Rear Panel The rear panel of R-300NP is shown as below. Figure 3 R-300NP Rear Panel 1. Antenna 2. LAN Ports (1-4) 3. WAN/PoE port 4. USB 5. Reset 6. Power jack 7. Antenna The rear panel of WG-701/WG-606 is shown as below. Figure 4 R-300NP Rear Panel 1. Antenna R-300NP 2. LAN Ports (1-4) 3. WAN Port 4. USB 5. Reset 6. Power jack 7. Antenna The rear panel of AP-300NP is shown as below. 1. Antenna 2. LAN Ports (1-4) 3. WAN/PoE Port 4. Reset 5. Antenna 1-5 Technical Specifications 1-5-1 Hardware Specifications Network Specification IEEE802.3 10BaseT Ethernet IEEE802.3u 100BaseTX Fast Ethernet IEEE802.11g Wireless LAN ANSI/IEEE 802.3 NWay auto-negotiation Wi-Fi Compatible Connectors Four LAN Ports (10BaseT/100BaseTX Auto cross-over) One WAN Port (10BaseT/100BaseTX Auto cross-over) External Antenna Type 4dBi (Max) Dual detachable diversity antenna with reverse SMA LED Indicators One POWER LED R-300NP One WAN 10/100M Link/Activity LED Four LAN 10M/100M Link/Activity LEDs One Wireless Link/Activity LED One System LED Power Requirement R-300NP: External Power Adapter: Power input: 12V, 1A Power consumption: Under 5 Watts PoE: Power input: 48Vdc, 0.4A, IEEE 802.3at Compliance Power consumption: Under 5 Watts WG-701: External Power Adapter: Power input: 12V, 1A Power consumption: Under 5 Watts WG-606: External Power Adapter: Power input: 12V, 1A Power consumption: Under 5 Watts AP-300NP: PoE: Power input: 48Vdc, 0.4A, IEEE 802.3at Compliance Power consumption: Under 5 Watts Environment Conditions Operating Temperature: 0 to 40°C Storage Temperature: -10 to 60°C Operating Humidity: 10~90% non-condensing Storage Humidity: 10% to 90% non-condensing Certifications FCC,CE,NCC, BSMI,NTC(Thailand) Dimension Size:222 (L) x 143 (W) x 36 (H) mm Weight: About 400 g (Net) Mounting Desktop, Wall mounted R-300NP 1-5-2 Software Specifications Networking IP Plug and Play (iPnP) WEP 64/128bit WPA-PSA (TKIP) WPA2-PSK(AES) WPA/WPA2 Mix Mode-PSK (AES) DHCP Server (RFC 2131) Static IP WAN Client DHCP WAN Client PPPoE WAN Client (RFC 2516) PPTP WAN Client NAT (RFC 1631) NTP (Network Time Protocol) Support Wireless Wireless IEEE802.11n User Authentication Facebook Authentication Access Form Security and Firewall Layer 2 Isolation SSL Administration VPN Pass through (IPSec/PPTP/L2TP) Pass through Destination IP/URL Pass through Source IP/MAC Restricted Destination Filtering IP/URL Anti-DDOS Management Administrator / Front Desk Access Management Access Control List Management (ACL) Remote Browser-based Configuration and management Firmware Upgrade (RFC 1350) via HTTP/TFTP Backup/Restore/Factory Default Setting Port Forwarding 10 R-300NP System Information Table Real-time Current User List / DHCP Clients List / Session List / Account List Syslog Bandwidth control per device Session control per device Session Trace SNMP (Read Only) Ping Command R-300NP 11 2 Installation The followings are instructions for setting up the R-300NP. Refer to the illustration and follow the simple steps below to quickly install your R-300NP. 2-1 Installation Requirements Before installing the R-300NP, make sure your network meets the following requirements. The R-300NP requires one of the following types of software: Windows XP/Vista/7 Red Hat Linux 7.3 or later version MAC OS X 10.2.4 or later version Web Browser Software (Microsoft I.E or Firefox , Google Chrome) One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card UTP network Cable with a RJ-45 connection (Package contents) Note: 1. The gateway’s default IP address setting is “10.59.1.1”. 2. The gateway’s default subnet mask setting is “255.255.255.0”. 12 R-300NP 2-2 Hardware Setup 1. Connect the R-300NP WAN port to modem by Ethernet cable.(Usually, the ISP will provide one Ethernet cable along with the modem) 2. Connect the R-300NP LAN port to PC by Ethernet cable. 3. Install the antennas. 4. Plug in the power adapter. The R-300NP will be booted once the power is connected. 5. Check the LED status of SYS, WAN, LAN and WLAN, the network connection is valid if the LED turned on. R-300NP 13 3. Configuring the R-300NP 3-1 Wizard Setup Step 1: Open your browser, and then enter the factory default IP address 10.59.1.1 in your browser’s location box. Press Enter. Figure 5 Web Browser Step 2: The R-300NP login page will appear. Typing the factory default Username “admin” and Password “admin” then click Login. If you are first time setting the system, the wizard setup screen will appear as figure 7. You will be guided, step-by-step, through a basic setup procedure. Username: admin Password: admin Figure 6 R-300NP login page Figure 7 Wizard Setup Screen Note: This Web agent is best viewed with IE 9.0 or Chrome and above browsers. Username and Password can consist of up to 20 alphanumeric characters and are case sensitive. If for some reason your password is lost or you cannot gain access to the R-300NP Configuration Program, please press the reset button to load the device to manufacturer defaults. If the R-300NP doesn’t send packet in 5 minutes (default), the R-300NP wills logout automatically. 14 R-300NP Step 3: Internet Connection Setting Select the appropriate Internet connection type to connect to your ISP. Figure 8 Internet Connection Setting Screen DHCP Client The device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP Client. Figure 9 Internet Connection Setting Screen—DHCP Client Setting R-300NP 15 Static IP Setting If Static IP Setting is selected, below setting screen will appear. Enter the IP address information provided by your ISP. Figure 10 Internet Connection Setting Screen—Static IP Setting Item Default Description IP Address 0.0.0.0 Enter the IP address provided by your ISP. Subnet Mask 0.0.0.0 Enter the subnet mask for the IP address. Gateway IP 0.0.0.0 Enter the Gateway IP Address provided by your ISP. Empty Enter the primary DNS server IP address for the xDSL/Cable Address Primary DNS Server Secondary DNS Server connection (provided by your ISP). Empty Enter the secondary DNS server IP address for the xDSL/Cable connection (provided by your ISP). If the primary DNS Server IP were not available, meanwhile, Secondary DNS Server IP would start in the same time. 16 R-300NP PPPoE (Mostly for ADSL modem users) If “PPPoE” is selected, below setting screen will appear. Enter the username, password and other major fields. Figure 11 Internet Connection Setting Screen—PPPoE Setting Item Default Description Username Empty Enter the user name provided by your ISP. Password Empty Enter the user password provided by your ISP. PPP MTU Setting 1492 MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting 1452 MSS (Maximum Segment Size) specifies maximum segment size. Service Name Enter the service name provided by your ISP. Empty Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your R-300NP to cut your connection with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables your Max Idle Time 10 Min. R-300NP to automatically re-establish your connection as soon as you attempt to access the Internet again Keep alive and Redial Period Keep alive Disable This option keeps your PPPoE enabled Internet access connected Redial Period 30 sec. indefinitely, even when it sits idle. R-300NP 17 PPTP (Mostly for Europe ADSL modem users) If “PPTP” is selected, then this screen will appear. Fill out all the information provided by your ISP. Figure 12 Internet Connection Setting Screen—PPTP Client Setting Item Default Description My IP Address Empty My Subnet Mask Empty Gateway IP Address Empty PPTP Server IP Address Empty Enter the PPTP server IP address provided by your ISP. Username Empty Enter the user name provided by your ISP. Password Empty Enter the user password provided by your ISP. PPP MTU Setting 1460 TCP MSS Setting 1400 Connection ID/Name Empty 18 Enter the PPTP local IP address provided by your ISP. Enter the PPTP local Subnet Mask IP address for the IP address (My IP Address). Enter the PPTP server Gateway IP address provided by your ISP. MTU (Maximum Transfer Unit) specifies maximum transmission unit size. MSS (Maximum Segment Size) specifies maximum segment size. Enter the connection ID or connection name. R-300NP Item Default Description Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your R-300NP to cut your connection with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on 10 Minutes Demand enables your R-300NP to automatically re-establish Max Idle Time your connection as soon as you attempt to access the Internet again. Keep alive and Redial Period Keep alive Disable This option keeps your PPTP enabled Internet access Redial Period 30 sec. connected indefinitely, even when it sits idle. Step 4: Wireless Setting This page allows you to define Country, Channel and 802.11 mode for wireless connection. Figure 13 Wireless Setting Screen Item Default Description Country ETSI Select Wireless region you located. Channel Enter the channel ID for wireless connection. You could choose from Ch1 to Ch11. 802.11 Mode 802.11n+802.11g+802.11b Enter the 802.11 Mode for wireless connection 802.11n+802.11g+802.11b 802.11n+802.11g 802.11g+802.11b 802.11n only 802.11g only 802.11b only R-300NP 19 Step 5: Authentication Service Setting Figure 14 Authentication Service Setting Screen Item Authentication Default No Authentication Description No Authentication Subscriber can direct access to the Internet without enter username and password. Social Media Authentication R-300NP provides Built-in Authentication for service provider to build up an Internet service with Coolbee WiFi service. Note: If you want to active Social Media Authentication by Coolbee WiFi, please refer to Appendix A. 20 R-300NP Step 6: System Setting Figure 15 System Setting Screen Item Username Default admin Description Enter the user name. The user name can consist of up to 20 alphanumeric characters and is case sensitive. Password admin Enter the user password. The password can consist of up to 20 alphanumeric characters and is case sensitive. Confirm Empty Enter the user password again to confirm the password. Time Zone GMT Enter the Time Zone for the system. Server IP/Domain time.nist.gov Enter NTP Server IP or Domain www.nist.gov Enter NTP Server IP or Domain 24 hours Enter the number of hours for update time. Name 1 Server IP/Domain Name 2 Update Time R-300NP 21 Daylight Saving Disable Time The system time won’t be effected by daylight saving. If you set the Daylight Saving Time (DST) on the R-300NP. Please adjust the start date and end date. Secure All This function allows remote user to management the Administrator IP device. You can specify one or any IP addresses for Address remote control the system. Click ”FINISH” button to save the settings then the system will restart. 3-2 Advanced Setup The Advanced Setup allows you to configure advanced settings related to accessing the Internet, including, 1. SYSTEM 2. WAN / LAN 3. SERVER 4. AUTHENTICATION 5. BANDWIDTH 6. FILTERING 7. PORT FORWARDING 8. SYSLOG 9. SESSION TRACE 10. SNMP 11. WIRELESS 12. FIREWALL Figure 16 Advanced Setting Item Screen Note: After change the settings of device, please click “Apply” button to save the new settings. 22 R-300NP 3-2-1 System Define the R-300NP System configuration. Figure 17 System Setting Screen Figure 18 System Setting Screen R-300NP 23 Item Default System/Host Name Empty Domain Name Empty Location Information Empty Description The system name can consist of up to 50 alphanumeric characters. The Domain name can consist of up to 50 alphanumeric characters. Key in your location information. Date/Time Enables or disables NTP (Network Time Protocol) NTP Setting Disable Time Server. Network Time Protocol can be utilized to Server IP/Domain Name Empty Time Zone GMT+8:00 Select the appropriate time zone for your location. Update Time 24 hours Enter the number of hours for update time. Disable Enables or disables Daylight Saving Time (DST). synchronize the time on devices across a network. Daylight Saving Time Enter the IP address/domain name of NTP server. Month/Day Set the Daylight Saving Time (DST) on the R-300NP. Adjust the start date and end date. NAT (Network Address Translation) NAT Enable Secure administrator IP Addresses Enables or disables NAT Address Translation function. Options: Any or Specify. Administrator can specify 5 IP Any addresses or a range to allow remote control access from network. This function allows remote user to ping the R-300NP Allow remote user to ping the device Enable through Internet. Ping is normally used to test the physical connection between two devices, to ensure that everything is working correctly. Click “Apply” button to save the new settings. After click “Apply” button, the dialog box will appear as Figure. Click “back” button to back to previous page. Figure 19 Dialog Box 24 R-300NP 3-2-2 WAN/LAN Device IP (LAN IP) Setting Figure 20 Device IP (LAN IP) Setting Item Default Description Public LAN IP Address 10.59.1.1 The internal LAN IP address of your Wireless Subscriber Server Gateway for public LAN. Subnet Mask 255.255.255.0 Enter the subnet mask for public IP address. Private LAN IP Address 10.59.1.1 The internal LAN IP address of your Wireless Subscriber Server Subnet Mask 255.255.255.0 Enter the subnet mask for private IP address. Ethernet Public LAN Gateway for private LAN. You could choose which Ethernet to use for the internet connection. WAN MAC Address Figure 21 WAN MAC Address Setting Item Default Description WAN MAC Default The default MAC address is set to the WAN physical interface on Address WAN MTU device. 1500 You could set the MTU in this column. Setting R-300NP 25 WAN Port Mode Figure 22 WAN Port Mode Setting DHCP Client The device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP Client. Figure 23 DHCP Client Setting Screen 26 R-300NP Static IP If Static IP Setting is selected, this screen will appear. Enter the IP address information provided by your ISP. Figure 24 Static IP Setting Screen Item IP Address Description Enter the IP address for the xDSL/Cable connection (provided by your ISP). Subnet Mask Enter the subnet mask for the IP address. Gateway IP Gateway Enter the Gateway IP address for the xDSL/Cable connection (provided by your ISP). Primary DNS Server A primary DNS server IP address for the xDSL/Cable connection (provided by your ISP). Secondary DNS Server A secondary DNS server IP address for the xDSL/Cable connection (provided by your ISP). If the primary DNS Server IP were not available, the secondary DNS Server IP would start in the same time. R-300NP 27 PPPoE Figure 25 PPPoE Setting Screen Item Default Description User Name Empty Enter your PPPoE account name Password Empty Enter your PPPoE password.. PPP MTU Setting 1492 MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting 1452 MSS (Maximum Segment Size) specifies maximum segment size. Service Name Empty Enter the service name provided by your ISP. The service name can consist of up to 64 alphanumeric characters and is case sensitive. Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your R-300NP to cut your connection with Max Idle Time your ISP after a specified period of time (Max Idle Time). If 10 Minutes you have been disconnected due to inactivity, Connect on Demand enables your R-300NP to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. Keep alive and Redial Period 28 Keep alive Disable Redial Period 30 Seconds connected indefinitely, even when it sits idle. This option keeps your PPPoE enabled Internet access R-300NP PPTP Figure 26 PPTP Setting Screen Item My IP Address Default Empty Description A PPTP local IP address for the xDSL/Cable connection (provided by your ISP). My Subnet Mask Empty Enter the PPTP local IP address for the xDSL/Cable connection. Gateway IP Address Empty A PPTP local default gateway for the xDSL/Cable connection (provided by your ISP). PPTP Server IP Address Empty Enter the PPTP server IP address for the xDSL/Cable connection (provided by your ISP). Username Empty Enter your PPTP account name. Password Empty Enter your PPTP password. PPP MTU Setting 1460 MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting 1400 MSS (Maximum Segment Size) specifies maximum segment size. Connection ID/Name R-300NP Empty Enter the connection ID or connection name. 29 Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your R-300NP to cut your connection Max Idle Time 10 Minutes with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables your R-300NP to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. Keep alive and Redial Period Keep alive Disable This option keeps your PPTP enabled Internet access connected indefinitely, even when it sits idle. Click “Apply” button to save the new settings. After click “Apply” button, the dialog box will appear as below. Click “back” button to go back to previous page. Figure 27 Dialog Box 30 R-300NP 3-2-3 Server Figure 28 Server Setting Screen Item Default Description Web Server HTTP Port 80 HTTPS Port 443 Enter the HTTP port number. The HTTP port allowed range is 80 or 8010 to 8060. Enter the HTTPS port number. The HTTPS port allowed range is 443 or 4430 to 4440. DHCP Server for Public LAN IP Pool Starting Address 10.59.1.2 Enter the DHCP Pool Starting IP address for Public LAN Pool Size 253 The DHCP pool size range is 1 to 253. Lease Time 300 The DHCP lease time. Primary DNS Server 168.95.1.1 Enter the IP address of primary DNS server. Secondary DNS Server Empty Enter the IP address of secondary DNS server. DHCP Server for Private LAN IP Pool Starting Address 10.59.2.2 Enter the DHCP Pool Starting IP address for Private LAN Pool Size 253 The DHCP pool size range is 1 to 253. Lease Time 300 The DHCP lease time. Primary DNS Server 168.95.2.1 Enter the IP address of primary DNS server. Secondary DNS Server Empty Enter the IP address of secondary DNS server. Click “Apply” button to save the new settings. R-300NP 31 3-2-4 Authentication Figure 29 Authentication Setting Screen Item Authentication Default No Authentication Description No Authentication Subscriber can direct access the Internet without enter username and password. Social Media Authentication R-300NP provides Built-in Authentication for service provider to build up an Internet service with Coolbee WiFi service. Click “Apply” button to save the new settings. 3-2-5 Bandwidth The function enables administrator to limit bandwidth usage on per user basis (MAC address). That prevents users from consuming a disproportionately large amount of bandwidth. Every user gets a fair share of the available bandwidth. Figure 30 Bandwidth Setting Screen 32 R-300NP Item Bandwidth Default Disable Description Enables or disables Bandwidth Management. Specify Public LAN maximum Upstream/Downstream bandwidth: Maximum Upstream 64Kbps Specify the amount of upstream bandwidth. You can set the range by drop list：64K, 128K, 256K, 384K, 512K, 1.5Mbps, 3Mbps, 5Mbps, 10Mbps and 20 Mbps. Or key in by yourself, the range is from 64 ~20480Kbps Maximum Downstream 128Kbps Specify the amount of downstream bandwidth. You can set the range by drop list：64K, 128K, 256K, 384K, 512K, 1.5Mbps, 3Mbps, 5Mbps, 10Mbps and 20 Mbps. Or key in by yourself, the range is from 64 ~20480Kbps Specify Private LAN maximum Upstream/Downstream bandwidth: Maximum Upstream 64Kbps Specify the amount of upstream bandwidth. You can set the range by drop list：64K, 128K, 256K, 384K, 512K, 1.5Mbps, 3Mbps, 5Mbps, 10Mbps and 20 Mbps. Or key in by yourself, the range is from 64 ~20480Kbps Maximum Downstream 128Kbps Specify the amount of downstream bandwidth. You can set the range by drop list：64K, 128K, 256K, 384K, 512K, 1.5Mbps, 3Mbps, 5Mbps, 10Mbps and 20 Mbps. Or key in by yourself, the range is from 64 ~20480Kbps R-300NP 33 3-2-6 Filtering Filtering allows the administrator to have a list of restricted destinations, which is useful to block specified Internet websites or Intranet areas. Figure 31 Filtering Setting Screen Item Filtering Default Disable Description Enables or disables filtering function. It could be set up to 5 entries. HTTP Message The Web Site Enter the http message. The maximum character of the HTTP to display when a is blocked by message is 200. The warning page show as Figure 32. website is System blocked Figure 32 Warning screen 34 R-300NP Item Default Description Restrict Destination URL or Empty Enter the URL Page of you wants to filter; please use this format such like “http://www.yahoo.com”. The maximum character of the URL Page is 50. Website If the URL format is wrong, the system will show the error message as below. Start IP Empty Enter the start IP address of you wants to filter. Empty Enter the end IP address of you wants to filter. Empty Enter the destination IP address of you wants to filter. Address End IP Address IP Address Subnet Mask Empty Enter the destination subnet mask. No The index number of filtering address. Active Disable Click on check box, active or inactive the filtering address. Address List - Display the filtering address(s). Delete Select the check boxes and click ‘Delete’ to delete the filtering Disable address(s). Click “Add to List” button to add a new entry. Click “Apply” button to save the new settings. Click “Delete All & Apply” button to delete all entries. R-300NP 35 3-2-7 Port forwarding Administrator can set an entry of R-300NP which translating the address or port number of a packet to a new destination Figure 33 Port Forwarding Setting Screen Item Default Description Device Name Empty The LAN device name. The system could support up to 20 date at Virtual Port Device IP Address Empty Enter the IP address of LAN device in the format “xxx.xxx.xxx.xxx” Device Server Port Enter the server port of LAN device. one time. The virtual port number valid range is 60001 to 60050 or 5900 to 5910. Device MAC Address Empty The MAC address of LAN device. For input the device MAC address, please use this format such as”0050BA8D2296”. Application TCP Select one protocol type of LAN device by clicking in the list box. Click “Apply” button to save the new settings. Note: The system does not support FTP. 3-2-8 Syslog The function allows the device to transmit event messages to your syslog server or your email address 36 R-300NP for monitoring and troubleshooting. Figure 34 Syslog Setting Screen Syslog Setting Item Send to Syslog Default Description Disable Enables or disables the syslog server function. Empty Enter syslog server’s IP address. The R-300NP will send all of its Server Syslog on LAN Server IP Address logs to the specified syslog server. Server MAC Address Empty Enter the syslog server’s MAC address. The R-300NP will send all of its logs to the specified syslog server. Syslog on WAN Server 1 IP Address Empty Enter IP address of first syslog server. Server 2 IP Address Empty Enter IP address of second syslog server. Send to Email Disable Enables or disables the send to e-mail function. E-mail Server IP Address or Domain Empty Enter the SMTP server IP address or domain name. The Name maximum allowed characters length is 50. SMTP Port 25 The SMTP port allowed range is 25 or 2500 to 2599. E-mail (SMTP) Server Disable If your SMTP server requires authentication before accepting needs to check my e-mail, please enable this check box. The username and account password are supplied by your network administrator, SMTP server provider or ISP. R-300NP 37 Username Empty Enter the username for the SMTP server. Password Empty Enter the password for the SMTP server Empty Enter the name you would like to appear in the “message from” Email From Name field of your outgoing message. The maximum allowed characters length is 20. Email Address Empty Enter your e-mail address. This is the address others will use to Email To Disable Enables or disables the send to e-mail function. Email Address 1 Empty Enter your first e-mail address to receive the logs. Email Address 2 Empty Enter your second e-mail address to receive the logs. send email to Email Address 1/Email Address 2. Click “Apply” button to save the new settings. After click “Apply” button, the dialog box will appear as below. Click “Back” button to return to Syslog setting screen. Figure 35 Success Dialog Box 38 R-300NP Log Settings Figure 36 Log Settings Screen Item Default Description System Syslog Unchecked If checked, the log data will be sent by syslog. Email Unchecked If checked, the log data will be sent by e-mail. Item Interval Time Description Device Information 10 minutes System Up Notice When system If device have been rebooted or restarted, the log will be rebooted or restarted sent. System Account Activity Information When system manager login or logout A log will be sent if system manager (Administrator) login to or logout from the device Firmware Update Notice When firmware update completed A log will be sent if firmware update completed Wireless Association 10 minutes. Information The log included system information would be sent according to specified interval time. The time could be set from 5 to 60 minutes. A log including wireless users information will be sent according to specified interval time. The time could be set from 5 to 60 minutes. Click “Apply” button to save the new settings. After click “Apply” button, the success dialog box will appear. Click “Back” button to return to Logs setting screen. Figure 37 Success Dialog Box R-300NP 39 3-2-9 Session Trace Session Trace is an intelligent function to help service provider to trace every user’s access behavior. When “session trace” is enable , the system will collect information such like destination IP, destination port, source IP, source MAC, source port by every user and send the collected information in text format file to specified TFTP server or Email Server. Figure 38 Session Trace Setting Screen Item Default Description Session Trace Disable Disables or enables session trace function. TFTP Server Disable Disables or enables this function Primary TFTP Server IP Empty Enter the IP address of the primary TFTP server. Empty Enter the IP address of the second TFTP server. Disable Disables or enables this function Address Secondary TFTP Server IP Address E-mail Server 40 R-300NP Send to Email Disable Enables or disables the send to e-mail function. IP Address or Domain Empty Enter the SMTP server IP address or domain name. The Name maximum allowed characters length is 50. SMTP Port Empty The SMTP port allowed range is 25 or 2500 to 2599. E-mail (SMTP) Server Disable If your SMTP server requires authentication before needs to check my accepting e-mail, click on check box. These values account (username and password) are supplied by your network administrator, SMTP server provider or ISP. Username Empty Enter the username for the SMTP server. Password Empty Enter the password for the SMTP server Empty Enter the name you would like to appear in the “message Email From Name from” field of your outgoing message. The maximum allowed characters length is 20. Email Address Empty Enter your e-mail address. This is the address others will use to send email to Email Address 1/Email Address 2. Email To Email Address 1 Empty Enter your first e-mail address to receive the logs. Email Address 2 Empty Enter your second e-mail address to receive the logs. Send Session Trace log 10 minutes The field means to send the session trace log file every file every~ minutes. R-300NP interval minutes. The value range is 5 to 1440 (minutes). 41 3-2-10 SNMP The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration screen. Figure 39 SNMP Setting Screen Item Default Description SNMP Disable Disables or enables the SNMP management. SNMP Port 161 If the SNMP enables, also allowed to specific the SNMP port Trap Port 162 number via NAT. The allowed SNMP port numbers are 161 (default), 16100-16199 and Trap port numbers are 162 (default), 16200-16299. This Port setting is useful for remote control via NAT network. Configuration Community Name public/private Every unit with SNMP enable must be configured to recognize one or more community. The default setting for the community of entry 1 is “public” and for the entry 2 is “private” and others are empty. NMS Address ANY The address of the NMS. The default settings for the NMS Networking are “ANY”. 42 R-300NP Item Privileges Default Read/Write Description Choose “Read”, “Write”, “Trap Recipients” and “All” for different privileges. The default setting of the entry 2 is “write” and others are “read”. Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others are invalid. 3-2-11 Wireless Figure 40 Wireless Setting Screen Item Default Description General Settings Choose one： 802.11 Mode R-300NP -802.11n+802.11g+802.11b -802.11n+802.11g 802.11n+802.11 -802.11g+802.11b g+802.11b -802.11n only -802.11g only -802.11b only 43 Country ETSI Wireless Region. You could choose “ETSI” or “FCC”. Channel Select the channel ID for wireless connection. Channel Width Auto 20/40 MHZ You could chose “Auto 20/40 MHZ” or “20 MHZ” Multiple ESSID Setting ESSID The R-300NP has 4 ESSID. The ESSID is the unique name that is shared among all points in a wireless network. It is Wireless-XXXX case sensitive and must not exceed 32 characters. Click “Edit”, then you can configure more detail of ESSID settings. _1 ~4 The default ESSID name is Wireless-XXXX_1(to 4) “XXXX” is the last 4 digit of R-300NP WLAN MAC. Beacon Interval 200 This value valid range is 1 to 1000 indicates the frequency interval of the beacon. This value valid range is 256-2342. This setting determines the packet size at which the R-300NP issues a request to send (RTS) before sending the packet. A low RTS Threshold RTS Threshold 2342 setting can be useful in areas where many client devices are associating with the R-300NP, or in areas where the clients are far apart and can detect only the R-300NP and not each other. Fragmentation 2346 Threshold Preamble Type 44 This setting determines the size at which packets are fragmented. Enter a setting ranging from 256 to 2346 bytes. Use a low setting in areas where communication is poor or where there is a great deal of radio interference. The preamble type is a section of data at the head of a packet that contains information the R-300NP and client Long Preamble devices need when sending and receiving packets. The setting menu allows you to select a long, short or dynamic preamble type. R-300NP Edit the ESSID Figure 41 Wireless ESSID Setting Screen Item Default Description ESSID Active You could set active or inactive for any ESSID. The ESSID is the unique name that is shared among all points in a wireless network. It is case sensitive and must not exceed 32 characters. Broadcast Enable a method of transferring a message to all recipients simultaneously Open This allows you to setting if there’s any data encryption will be and what kind of encryption you would like to use. General Settings Security Settings Security Settings Open Data will transit without any data encryption. Wired Equivalent Privacy Encryption WEP Encryption Encryption 64 bit Mode HEX The R-300NP supports 64-bit or 128 bit WEP encryption. Options: HEX (Hexadecimal) and ASCII (American Standard Code for Information Interchange). WEP Key This selects which of the Keys that R-300NP uses when it transmits. You can change the selected encryption key any R-300NP 45 time to increase the security of your network. Note: You have to configure all WEP keys (1~4), and select one of the WEP key you would like to use this time. Enter 5 characters for ASCII 64-bit WEP Key. Enter 10 characters for Hex 64-bit WEP Key. Enter 13 characters for ASCII 128-bit WEP Key. Enter 26 characters for Hex 128-bit WEP Key. Wi-Fi Protected Access Encryption WPA ,WPA2 and Mix mode Encryption Group Key 86400 Seconds Enter a number in the field to set the force re-keying interval. Re-Keying Use WPA with Enable Pre-shared Key Enter a pre-shared key from 8 to 32 case sensitive ASCII Pre-Shared Key 1234567890 characters. Use WPA with RADIUS Disable Server IP Empty Enter the RADIUS server IP address or domain name. The maximum allowed characters length is 15. Enter the authentication port number. The allowed numbers Authentication Port 1812 are from 0 to 65535. Share Secret Key Empty Enter the RADIUS secret key Click “Apply” button to save the new settings. 46 R-300NP 3-2-12 Firewall A firewall protects your network against threats from the public Internet. Here you can enable or disable R-300NP’s firewall. Figure 42 Firewall Setting Screen Item Default Description Block IP Options Attack Enable WAN/LAN The R-300NP will ignore any IP packets with IP option field in the datagram header. The reason for limitation is IP option appears to be a vulnerability of the security because it will carry significant information, such as security, closed user group parameters, a series of Internet addresses, routing messages...etc. Interface: WAN/LAN, WAN, LAN Block Trace Route Enable The R-300NP will not forward any trace route packets if you enable this item. Block SYN Fragment Attack R-300NP Enable WAN/LAN The R-300NP will drop any packets that having SYN flag and having mote fragment setting if you enable 47 this item. Interface: WAN/LAN, WAN, LAN Block TCP Flags Scan Enable WAN/LAN Any TCP packet with anomaly flag setting will be dropped if you enable this item. Those scanning activities include no flag scan, FIN without ACK scan, SYN FIN scan, Xmas scan and full Xmas scan. Interface: WAN/LAN, WAN, LAN Block SYN Flood Attack Enable 50 packets/ per sec WAN/LAN Enable the SYN flood defense function to prevent the TCP SYN packets’ attempt to exhaust the limited-resource of R-300NP. Once the TCP SYN packets exceeded the defined value, the R-300NP will start to discard the subsequent TCP SYN packets. Interface: WAN/LAN, WAN, LAN Block UDP Flood And Fraggle Attack Enable 50 packets/ per sec WAN/LAN Once the UDP packets exceeded the defined value, the R-300NP will start to discard the subsequent UDP packets. Interface: WAN/LAN, WAN, LAN Block ICMP Flood Attack And Smurf Attack Enable 50 packets/ per sec WAN/LAN Similar to the UDP flood defense function, once the thresholds of ICMP packets have exceeded the defined value, the R-300NP will discard the ICMP echo requests coming from the Internet. And R-300NP will also ignore any broadcasting ICMP echo request. Interface: WAN/LAN, WAN, LAN Port Scan Defence Enable WAN/LAN Enables/disables R-300NP from responding to Internet based port scans. This feature is designed to protect your private local network from Internet based hackers who attempt to gain unsolicited access your network by detecting open IP ports on R-300NP. Interface: WAN/LAN, WAN, LAN 48 R-300NP 3-3 System Status Display R-300NP system basic status, including, 1. System 2. Current User 3. DHCP Clients 4. Session List Figure 43 System Status Item Screen 3-3-1 System The System Information Menu displays current system basic information including the service connection message, host name, LAN, WAN, DHCP Configuration, DNS, E-mail Redirection, SSL Certificate, network traffic Information and the system firmware version. Figure 44 System Status Screen R-300NP 49 Figure 45 System Status Screen 50 R-300NP R-300NP connect to Coolbee WiFi service If you R-300NP have registered on Coolbee WiFi and have been switch to Coolbee WiFi mode(Social Media Authentication enable), you will see the status of Coolbee WiFi on the top of the system page as below. Figure 46 System Status Screen 3-3-2 Current User Display the current logged-in subscribers’ status. It allows the service provider to disconnect any subscribers. Figure 47 Current User List (No Authentication) Item Description Click on refresh button to update the current user list page. Click the column button to sort the column in ascending/descending order. Click the column button to sort the column in ascending/descending order. Select the check boxes and click “Delete” to delete accounts. Delete all accounts in current user list. R-300NP 51 3-3-3 DHCP Clients The DHCP client table shows the current DHCP users for both Public DHCP and Private DHCP. Figure 48 Current User Screen 3-3-4 Session List The administrator could remote monitor the real time usage status of R-300NP via this page. Figure 49 Session List Screen 3-4 System Tools This allows service provider or administrator to process Firmware upgrade, change password and backup or restore configuration. 1. CONFIGURATION 2. FIRMWARE 3. SYSTEM ACCOUNT 4. PING COMMAND 5. RESTART 6. LOGOUT Figure 50 System Tools Item 52 R-300NP 3-4-1 Configuration Use the Configuration item to save, restore or reset configuration parameters of the R-300NP. Figure 51 Configuration Setting Screen Item Backup Default Description Click it to save the system configuration to your computer. (The default file name is “export.cfg” ) or it could be save to the TFTP you assigned. Remote TFTP Server IP Empty Enter the IP address of TFTP Server that you would like to Address store the system backup file. File Name Empty Enter the file name for the system backup file. Restore Click it to restore your system configuration, you could choose the file from your computer or TFTP server. Local PC File Path Empty Enter the file pathname of the system configuration file in the Local PC File Path field. Remote TFTP Server IP Empty Enter the IP address of TFTP Server where the system Address configuration file is stored. File Name Empty Enter the file name that you use to restore the system. Reset the system back Click it to erase all setting and back to factory default. to factory defaults R-300NP 53 3-4-2 Firmware This function allows you to upgrade the firmware of your R-300NP. Manual Firmware Upgrade Figure 52 Manual Firmware Upgrade Setting Screen Item Default Description This allow administrator to upgrade the firmware via local file. Local PC File Path Empty Select the file from local PC. This allows administrator use TFTP server to upgrade firmware. Remote TFTP Server IP Empty Enter the IP address of TFTP Server. Empty Enter the file name in the File Name field. Address File Name Note: 1. Before downloading the new firmware, users must save the configuration file for restore configuration parameters of the device. 2. Do not remove power during the upgrade process. This will damage the unit. 54 R-300NP Scheduled Firmware Upgrade Scheduled Firmware Upgrade is a program that enables an automatic upgrade to the latest firmware version through the TFTP server. Figure 53 Scheduled Firmware Upgrade Setting Screen Item Default Description Disable/Enable Disable Disable or enable the scheduled firmware upgrade TFTP Server IP Empty Enter the IP address of TFTP Server. File Synchronization Empty Enter the file name and location in the File function. Synchronization field. Click the button to display synchronization file example. Frequency Weekly Set the firmware upgrade time. The default value is “Weekly”. Note: Do not turn the power off during the upgrade process. This will damage the unit. R-300NP 55 3-4-3 System Account Use the System Account screen to change the administrator setting. Figure 54 System Account Setting Screen Item Description Username The username can consist of up to 20 alphanumeric characters and is sensitive. Password The password can consist of up to 20 alphanumeric characters and is sensitive. Confirm The password for confirmation. Idle Time Out The user idle time out valid is 1 to 1440 minutes. If the idle time out is set as 5 minutes, it means if the account doesn’t send packet in 5 minutes, the account will logout automatically. 3-4-4 PING Command The Ping function can check the R-300NP networking connect status. Figure 55 Ping Command Screen Item IP or URL 56 Description Enter the IP address or the URL link of the unit that you would like to check. R-300NP 3-4-5 Restart If your R-300NP is not running normally, you can choose this option to restart R-300NP. Click the “Apply” button to restart the R-300NP with all of your settings remaining the same. Figure 56 Restart Screen 3-4-6 Logout If you would like to leave the configuration page, please click “Apply” to exit. Figure 57 Logout Screen R-300NP 57 Appendix A Regulations/EMI Compliance FCC Warning statement For FCC 15b devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation FCC RF Radiation Exposure Statement 1. This Transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 58 R-300NP NCC Statement 低功率射頻電機設備警語 依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功 率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並 改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 NTC Thailand: “This telecommunication equipment conforms to NTC technical requirement.” R-300NP 59 Appendix D LIMITED WARRANTY What the warranty covers: We warrant its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, we will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: The Easy Hotspot Kit is warranted for one year for all parts and one year for all labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product, on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone not authorized by us. c. Any damage of the product due to shipment. d. Removal or installation of the product. e. Causes external to the product, such as electric power fluctuations or failure. f. Use of supplies or parts not meeting our specifications. g. Normal wears and tear. h. Any other cause that does not relate to a product defect. 3. Removal, installation, and set-up service charges. 60 R-300NP How to get service: 1. For information about receiving service under warranty, contact our Customer Support. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a Description of the problem and (e) the serial number of the product. 3. Take or ship the product prepaid in the original container to your dealer, and our service center. 4. For additional information, contact your dealer or our Customer Service Center. Limitation of implied warranties: THERE ARE NO WARRANTIED, EXPRESSED OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Exclusion of damages: OUR LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. We SHALL NOT BE LIABLE FOR: 1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. 2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. 3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. R-300NP 61
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 61 Language : en-US Tagged PDF : Yes Title : Copyright Notice Author : ariel Creator : Microsoft® Word 2010 Create Date : 2014:08:22 17:59:24+08:00 Modify Date : 2014:08:22 17:59:24+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools