Hangzhou AiXiangJi Technology MA8801 Tuya Smart Wi-Fi Module User Manual
Hangzhou AiXiangJi Technology Co., Ltd. Tuya Smart Wi-Fi Module
Users Manual
TYW001DATASHEET
TuyaSmartWi-FiModule
Thisequipmentshouldbeinstalled and operatedwithminimumdistance20cmbetween theradiatorandyourbody.
TYW001is anultra-compact,low-powerembedded Wi-Fimodulebased onMarvell88MC200and
Marvell88w8801.ItintegratedwirelessLANMAC Baseband RadioandanARMCortex-M3that
runsWi-Finetworkingstackandsoftwareapplicationlibrary.TYW001has1Mbytesflash,512KB
RAMbytesandrichperipheralsforyourIOTWi-Fiapplication.
Asimplifiedblockdiagram oftheTYW001moduleisdepictedinthefigurebelow
TherearetwomothedtousetheTYW001module asfollows:
TYW001DATASHEET
2412-2462MHz
TYW001DATASHEET
4.4SpecificationsofWi-Fi'soutputpower evm sensitivity
TYW001DATASHEET
TYW001DATASHEET
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncont
rolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match
the intended destination.
The firmware setting is not accessible by the end user.
The final end product must be labelled in a visible area with the following:
“Contains Transmitter Module 2AFNLMA8801”
This radio module must not installed to co-locate and operating simultaneously with
other radios in host system, additional testing and equipment authorization may be
required to operating simultaneously with other radio.
This LMA does not have RF shielding and is tested and approved as standalone
configuration, additional evaluation may be required for any system integrated this
radio module.