Hangzhou AiXiangJi Technology MA8801 Tuya Smart Wi-Fi Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2756542
Application ID	GKQrNyawU/0OnDIoryLygA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	115.54kB (1444249 bits)
Date Submitted	2015-09-21 00:00:00
Date Available	2015-09-22 00:00:00
Creation Date	2015-09-21 09:50:37
Producing Software	pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Document Lastmod	2015-09-21 10:45:45
Document Title	User Manual.pdf
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Administrator

TYW001 DATASHEET
Tuya Smart Wi-Fi Module
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
TYW001 is an ultra-compact, low-power embedded Wi-Fi module based on Marvell 88MC200 and
Marvell 88w8801. It integrated wireless LAN MAC Baseband Radio and an ARM Cortex-M3 that
runs Wi-Fi networking stack and software application library. TYW001 has 1M bytes flash, 512KB
RAM bytes and rich peripherals for your IOT Wi-Fi application.
A simplified block diagram of the TYW001 module is depicted in the figure below
There are two mothed to use the TYW001 module as follows:
TYW001 DATASHEET
2412-2462MHz
TYW001 DATASHEET
4.4 Specifications of Wi-Fi's output power evm sensitivity
TYW001 DATASHEET
TYW001 DATASHEET
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncont
rolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match
the intended destination.
The firmware setting is not accessible by the end user.
The final end product must be labelled in a visible area with the following:
“Contains Transmitter Module 2AFNLMA8801”
This radio module must not installed to co-locate and operating simultaneously with
other radios in host system, additional testing and equipment authorization may be
required to operating simultaneously with other radio.
This LMA does not have RF shielding and is tested and approved as standalone
configuration, additional evaluation may be required for any system integrated this
radio module.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2015:09:21 09:50:37+08:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Modify Date                     : 2015:09:21 10:45:45+08:00
Metadata Date                   : 2015:09:21 10:45:45+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : User Manual.pdf
Producer                        : pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Document ID                     : uuid:2fc93233-1727-4eb5-851a-6e91e90ae766
Instance ID                     : uuid:212166af-c70b-464e-bdd6-ad7c52061bae
Has XFA                         : No
Page Count                      : 9
Author                          : Administrator

EXIF Metadata provided by EXIF.tools