Hangzhou AiXiangJi Technology TYWE1S Tuya Smart Wi-Fi Module User Manual x

Download:
Mirror Download [FCC.gov]
Document ID	2888945
Application ID	F5tLDPjAbOm8OoytaAUefA==
Document Description	User Manual rev01
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.5kB (156262 bits)
Date Submitted	2016-01-28 00:00:00
Date Available	2016-01-03 00:00:00
Creation Date	2016-01-28 14:55:22
Producing Software	pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	说明书.docx
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Administrator

TYWE1S DATASHEET
Tuya Smart Wi-Fi Module
1. Product Overview
TYWE1S is a low power consumption module with built-in Wi-Fi connectivity solution
designed by HangZhou Tuya Technology Corporation. The Wi-Fi Module consist a highly
integrated wireless radio chip ESP8266EX and extra flash which has been programed with Wi-Fi
network protocol and plenty of software examples.TYWE1S also has an 32-bit CPU, 1M byte
flash, 36k SRAM and various peripheral resources.
TYWE1S is a RTOS platform, embedded with all the Wi-Fi MAC and TCP/IP protocol
function examples, users can customize their Wi-Fi product by using these software examples.
Figure 1 shows the block diagram of the TYWE1S.
Figure 1. The block diagram of the TYWE1S
1.1 Features
²
²
²
²
Integrated low power consumption 32-bit CPU, also known as application processor
Basic frequency can support both 80MHz and 160MHz
Supply voltage range: 3V to 3.6V
Peripherals: 6×GPIOs, 1×UART , 1×ADC
Wi-Fi connectivity:
802.11 b/g/n
Channel 1 to 11 @ 2.4GHz
Support WPA/WPA2
19dBm output power in 802.11b mode
Support STA/AP/STA+AP operation mode
Support Smart Link function for both Android and iOS devices
Standby power consumption is less than 0.1 mW (DTIM3)
On-board PCB antenna, or IPEX connector for external antenna
TYWE1S DATASHEET
CE, FCC certified
Operating temperature range: 0℃ to 70 ℃ (Commercial grade), -40℃ to 85 ℃
(Industrial grade)
1.2 Main Application Fields
²
²
²
²
²
²
²
Intelligent Building
Intelligent home, Intelligent household applications
Health care
Industrial wireless control
Baby monitor
Webcam
Intelligent bus
TYWE1S DATASHEET
2. Dimensions and Footprint
2.1 Dimensions
TYWE1S has 2 columns of Pins (2*9). The distance between each Pin is 1.5mm.
Size of TYWE1S: 18mm(W)*23.5mm(L)*4.1mm(H)
Figure 2 shows the dimensions of TYWE1S.
Figure 2. The dimensions of TYWE1S
2.2 Pin Definition
Table 1 shows the general pin attributes of TYWE1S
Table 1. The typical pin definition of TYWE1S
PIN NO. NAME TYPE
DESCRIPTION
VCC
UART1 power (3.3V)
U1TX
I/O
UART1_TXD
U1RX
I/O
UART1_RXD
3V3
Supply voltage (3.3V)
GND
Ground
IO14
I/O
GPIO_14
IO12
I/O
GPIO_12
U0TX
I/O
UART0_TXD(used to print module's internal information)
IO0
I/O
GPIO_0(processing during initials, caution when used)
10
IO5
I/O
GPIO_5
TYWE1S DATASHEET
11
U0RX
I/O
UART0_RXD(used to print module's internal information)
12
IO1
I/O
GPIO_1(status is uncertain during initials)
13
IO4
I/O
GPIO_4
14
GND
Ground
15
GND
Ground
16
RESET
I/O
External reset singal(negative level effects)
17
TOUT
AI
ADC terminal
18
GND
Ground
Note: S: Power supply pins; I/O: Digital input or output pins; AI: Analog input.
TYWE1S DATASHEET
3. Electrical Characteristics
3.1 Absolute Maximum Ratings
Table 2. Absolute Maximum Ratings
PARAMETERS
DESCRIPTION
MIN
MAX
UNIT
Ts
Storage temperature
-40
125
℃
VDD
Supply voltage
3.6
Electrostatic release quantity (Human body model)
TAMB-25℃
KV
Electrostatic release quantity (Machine model)
TAMB-25℃
0.5
KV
MIN
TYPICAL
MAX
UNIT
Temperature for Commercial grade
-30
70
℃
Temperature for Industrial grade
-40
85
℃
Supply voltage
3.0
3.6
VIL
IO negative level input
-0.3
3V3*0.25
VIH
IO positive level input
3V3*0.75
3.6
VOL
IO negative level output
3V3*0.1
VIH
IO positive level output
3V3*0.8
Imax
IO drive current
12
mA
Cpad
Capacitance of the input pin
pF
3.2 Electrical Conditions
Table 3. Electrical Conditions
DESCRIPTION
PARAMETERS
Ta
VDD
3.3 Wi-Fi Transmitting Current Consumption
Table 4. Wi-Fi TX current consumption
PARAMETERS
MODE
RATE
TYPICAL
UNIT
IRF
11b
11Mbps
170
mA
IRF
11g
54Mbps
140
mA
IRF
11n
MCS7
140
mA
3.4 Wi-Fi Receiving Current Consumption
Table 5. Wi-Fi RX current consumption
TYWE1S DATASHEET
PARAMETERS
MODE
RATE
TYPICAL
UNIT
IRF
11b
11Mbps
50
mA
IRF
11g
54Mbps
56
mA
IRF
11n
MCS7
56
mA
3.5 Working Mode Current Consumption
Table 6. MCU working current consumption
WORK MODE
CONDITION
Modem-Sleep CPU is processing, Wi-Fi modem turns off
TYPICAL UNIT
15
mA
Light-Sleep
CPU stops processing, Wi-Fi modem turns off
0.9
mA
Deep-Sleep
CPU stops processing, Wi-Fi modem turns off, Wi-Fi disconnects
10
μA
Power Off
Power off
0.5
μA
TYWE1S DATASHEET
4. WLAN Radio Specification
4.1 Basic Radio Frequency Characteristics
Table 7. Basic Radio frequency characteristics
PARAMETERS
DESCRIPTION
Frequency band
2412MHz - 2462MHz
Wi-Fi standard
IEEE 802.11n/g/b (Terminal 1-11)
11b:1,2,5.5,11(Mbps)
Data transmitting rate
11g:6,9,12,18,24,36,48,54(Mbps)
11n:HT20,MCS0~7
On-board PCB Antenna (Default)
Antenna type
U.FL RF external antenna (optinal)
4.2 Wi-Fi Transmitting Power
Table 8. Wi-Fi transmitting power
PARAMETERS
MIN TYPICAL MAX UNIT
RF average output power, 802.11b CCK Mode
11M
17
dBm
RF average output power, 802.11g OFDM Mode
54M
15
dBm
13
dBm
-10
10
ppm
RF average output power, 802.11n OFDM Mode MCS7
The Frequency error
4.3 Wi-Fi Receiving Sensitivity
Table 9. Wi-Fi Receiving sensitivity
PARAMETERS
MIN TYPICAL MAX UNIT
PER<8%, Receiving sensitivity, 802.11b CCK Mode
11M
-91
dBm
PER<10%, Receiving sensitivity, 802.11g OFDM Mode
54M
-75
dBm
-72
dBm
PER<10%, Receiving sensitivity, 802.11n OFDM Mode MCS7
TYWE1S DATASHEET
Regulatory information for the OEMs and Integrators
The guidelines described within this document are provided to OEM integrators installing Tuya
Smart Wi-Fi Module in notebook and tablet PC host platforms. Adherence to these requirements
is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When
all antenna type and placement guidelines described herein are fulfilled the Tuya Smart Wi-Fi
Module may be incorporated into notebook and tablet PC host platforms with no further
restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the
OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or
integrator is responsible to determine the required host regulatory testing and/or obtaining the
required host approvals for compliance
. Tuya Smart Wi-Fi Module are intended for OEMs and host integrators only.
. The Tuya Smart Wi-Fi Module must be operated with an access point that has been approved
for the country of operation.
. Changes or modification to Tuya Smart Wi-Fi Module by OEMs, integrators or other third parties
is not permitted. Any changes or modification to Tuya Smart Wi-Fi Module by OEMs, integrators
or other third parties will void authorization to operate
Information to Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the
end user of the product or system incorporating the Tuya Smart Wi-Fi Module, in compliance
with local regulations. Host system must be labeled with "Contains FCC ID: 2AFNLTYWE1S ", FCC
ID displayed on label.
The Tuya Smart Wi-Fi Module must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes with the product.
Intel Corporation is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with the wireless adapter kit or the
substitution or attachment of connecting cables and equipment other than that specified by Intel
Corporation. The correction of interference caused by such unauthorized modification,
substitution or attachment is the responsibility of the user. Intel Corporation and authorized
resellers or distributors are not liable for any damage or violation of government regulations that
may arise from the user failing to comply with these guidelines.
This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed
exposure conditions (antennas are greater than 20cm from a person’s body)when installed in
certain specific configurations.
The host system shall have a label showing: Contains FCC ID: 2AFNLTYWE1S
This product adopts the PCB antenna, the antenna gain is 1dBi
When the user selects U.FL RF connector antenna, it requires the a complete the antenna. the
kind of antenna that users can be use: 2.4 G RF antenna U.FL. RF connector(antenna type: FPC
antenna, Integral antenna）
(The gain of antenna : 1dBi)
TYWE1S DATASHEET
5. Antenna Information
5.1 Antenna Type
Antenna can be connected using On-board PCB antenna or an external antenna, the default
way is using the On-board PCB antenna.
User can modify the connection mode shown below: (TYWE1S has a resistance--0omh/0402
marked as red)
Figure 3. On-board PCB Antenna configuration
Figure 4. External Antenna configuration
5.2 Reduce Antenna Interference
While using the On-board PCB antenna, in order to have the best Wi-Fi performance, it’s
recommended to keep a minimum 15mm distance between the antenna part and the other metal
pieces.
5.3 U.FL RF Connector
Figure 5 shows the physical parameter of the U.FL RF connector.
Figure 5. The physical parameter of the U.FL RF connector
TYWE1S DATASHEET
This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed
exposure conditions (antennas are greater than 20cm from a person’s body)when installed in
certain specific configurations.
The host system shall have a label showing: Contains FCC ID: 2AFNLTYWE1S
This product adopts the PCB antenna, the antenna gain is 1dBi, more details is in chapter 4.
When the user selects U.FL RF connector antenna, it requires the a complete the antenna. the
kind of antenna that users can be use: 2.4 G RF antenna U.FL. RF connector(antenna type: FPC
antenna, Integral antenna）
(The gain of antenna : 1dBi)
TYWE1S DATASHEET
6. Packaging Information And Production Guide
6.1 Mechanical Dimensions
Figure 6. Top view of the module
Figure 7. Side view of the module
6.2 PCB Recommended Package
Figure 8. PCB Package Drawing
TYWE1S DATASHEET
6.3 Production Guide
² The storage for the delivered module should meet the following condition:
1. The anti-moisture bag should be kept in the environment with temperature < 30℃ and
humidity < 85% RH.
2. The expiration date is 6 months since the dry packaging products was sealed.
² Cautions:
1. All the operators should wear electrostatic ring in the whole process of production.
2. While operating, water and dirt should not have any contact with the modules.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
TYWE1S DATASHEET
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match
the intended destination.
The firmware setting is not accessible by the end user.
The final end product must be labelled in a visible area with the following:
“Contains Transmitter Module 2AFNLTYWE1S”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Title                           : 说明书.docx
Author                          : Administrator
Creator                         : pdfFactory Pro www.fineprint.cn
Producer                        : pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Create Date                     : 2016:01:28 14:55:22+08:00
Page Count                      : 13

EXIF Metadata provided by EXIF.tools