Hangzhou Hikvision Digital Technology 19K Remote User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2992476
Application ID	dC6aCfjO5HPkd9uT/juilQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.8kB (860057 bits)
Date Submitted	2016-05-16 00:00:00
Date Available	2016-05-16 00:00:00
Creation Date	2016-04-25 21:04:00
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-04-25 21:04:00
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	严嘉旼

Key Fob
User Manual
UD.6L0206D1163A01
Keyfob·User Manual
User Manual
© 2015 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instructions on how to use the Product. The software embodied in the
Product is governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This
manual cannot be reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are
registered trademarks or the subject of applications for the same by Hikvision and/or its
affiliates. Other trademarks mentioned in this manual are the properties of their
respective owners. No right of license is given to use such trademarks without express
permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN
DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
Keyfob·User Manual
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
ii
Keyfob·User Manual
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna type
iii
Keyfob·User Manual
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Warnings
 All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
 Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
 Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
 Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
 When the product is installed on wall or ceiling, the device shall be firmly fixed.
 If smOKe, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact the service center.
iv
Keyfob·User Manual
 If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
 Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or
places subject to shock (ignorance can cause equipment damage).
 Do not place the device in extremely hot (refer to the specification of the device for
the detailed operating temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
 The device cover for indoor use shall be kept from rain and moisture.
 Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
 Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the endurance of
sensor at the same time.
 Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface
coating of the device cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
 Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.
 Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.
0100001060115
Keyfob·User Manual
Table of Contents
1 Overview ...................................................................................................... 1
2 Operations ................................................................................................... 2
2.1 Control Panel and Wireless Device Connection ....................................................... 2
2.2 Delete the Specified Connected Wireless Device .................................................... 2
2.3 Delete All Connected Wireless Device ..................................................................... 2
2.4 The Configuration of The Wireless User Permission (No.1 - 32) .............................. 3
vi
Keyfob·User Manual
1 Overview
Figure 1-1 The Appearance of the Keyfob
Table 1-1 The Description of the Buttons
Button
Description
Stay Arming Button
Clearing Alarm Button
Arming Button
Disarming Button
Panic Button
Keyfob·User Manual
2 Operations
Before You Start:
 The control panel supports up to 32-ch keyfods.
 In the Keyfob – Keypad – Control Panel structure, the keyfod controls the control
panel via the keypad. The control panel decides the number of RF keypads (Network
Security Control Panel supports up to 9 keypads. Video Security Control Panel
supports up to 9 keypads. Network Security Control Panel with Bus Expending Module
supports up to 32 LCD keypads).
 The control panel can connect to/delete the keyfob. In the Keyfob – Keypad – Control
Panel structure, add the keyfob to the partition which the receiving keypad belong.
 For successful operation, the keyfob and receiving keypad
 The control panel can recognize different operations of a keypad. The wireless user
No. (1 to 32) corresponds to the CID Report No. (201 to 232).
Only installers and main users have the permission.
2.1 Connecting Control Panel and Wireless Device
Purpose:
Connect the control panel with wireless device.
Command:
【Password】+【*】+【91】+【Number】+【#】
Steps:
1. Enter the command to initialize the connection mode.
2. Press any button on the keyfob to exit the connection mode.
2.2 Deleting the Specified Connected Wireless Device
Purpose:
Delete the connected wireless device in the Control Panel.
Command:
【Password】+【*】+【90】+【Number】+【#】
2.3 Deleting All Connected Wireless Device
Purpose:
Delete all the connected wireless devices.
Keyfob·User Manual
Command:
【Password】+【*】+【92】+【#】
2.4 Setting the Wireless User Permission (No.1 - 32)
Purpose:
Set the wireless user permission.
Command:
701 0 0 0 0 0 #
Figure 2-1 The Command of Setting Wireless User Permission
Table 2-1 Description of Command Data
Data
Description
Command Address of setting the permission of wireless user. The address
701 to 732 corresponds to the User No. 1 to 32.
Permission: Arming
0: Support
1: Not Support
Permission: Sending Arming Report
0: Support
1: Not Support
Permission: Disarming
0: Support
1: Not Support
Permission: Sending Disarming Report
0: Support
1: Not Support
Permission: Clearing Alarm
0: Support
1: Not Support
End the Command

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : 严嘉旼
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:04:25 21:04:00+08:00
Modify Date                     : 2016:04:25 21:04:00+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools