Hangzhou Hikvision Digital Technology CSREM Remote Control User Manual

Hangzhou Hikvision Digital Technology Co., Ltd. Remote Control

User Manual

8'/%$Quick Start GuidePlease read the quick start guide carefully and keep it properly.
4Table of Contents6Packing ListCamera AppearanceOperation EZVIZ SPORTS APP S1 Features S1 Connects to Display Appendix Modes Description Appendix Parameters Description Restricted substances or elements identificationS1 Remote ControlAppearanceMain MenuOperation
5Open  the  packet  and  check  whether  the  S1 sports  camera  (Hereinafter  referred  to  as  S1) and all accessoriess is in good condition.S1 X1Power Adaptor X1 Quick Start Guide X1USB Data Cable X1Packing List
61243567891110131214Appearance Description
71Shutter Start/Stop Shooting2Camera Status IndicatorBlue steady: Standby; Flicker: Camera is on.3MIC Audio Input4Lens 152°Wide Angel5Red light steady when charging.Red light off when fully charged.6USB Port USB data trasferMicro SD Card Recommendation78micro HDMI HDMI Output91011121314Power Button Press and hold for 1 second to power on, 3 seconds to power off.Reset Reset button.Wi-Fi IndicatorPurple filcker: Wi-Fi is turning on.Blue Flicker: Wi-Fi is on.Wi-Fi On/Off Button Press and hold 3 seconds to switch the Wi-Fi on or off. Interface to all brackets.Standard BracketInterface(1/4 inch)Buzzer Audio Alert705705705705Micro SD Card SlotPower Camera Indicator
8Step 1Micro SD Card RecommendationInsert the micro SD card into the card slot.Insert micro SD card.Operation
9Step 2Use  the  USB  cable  to  charge.  When  the  power indicator goes off, the power is fully charged.Press the         for one second, and you will hear the  buzzer alerts 5 times. The  indicator  blinks  in purple. When the indicator turns steady blue,  the S1 is power-on and standby.You are recommended to fully charge the S1 when it is the first time you use it.Press  the  power  button        and  the  Wi-Fi button          at  the  same  time  to  restore  the default settings.Power on the camera.Connect the power cable.Power on the camera.
10Step 3Press record button        once,the camera starts recording, and the camera  indicator  flickers  in blue.Press  record      button,  the  camera  stops recording, and the camera indicator is onYou  can  choose  to  switch  record,  capture, burst snapshot with EZVIZ SPORTS App.If  no operation with  in  120  seconds,  the S1 camera shuts down automatically.Start RecordingStart recording.Stop recording.
11Step4You can connect to the S1 to the display to vide the video and picture.Connect the S1 camera and the display with a HDMI wire. Press the the power button      and the record button        at the same time and then you can view the video and picture stored on the micro SD card on the display.DisplayHDMI Cablemini HDMI InterfaceConnect to the display.
12Download  and  install  the  EZVIZ  App,  you can get  the  live  video,  playback  and  control  the camera.Use  the  mobile  phone  to  scan  the  QR  code  or search  in  the  App  Store  to  download  the  EZVIZ SPORTS App. Download EZVIZ SPORTS App.EZVIZ SPORTS APP
13Press the Wi-Fi       button for 3 seconds. When the status indicator flickers in blue, the Wi-Fi is on.Turn on the Wi-Fi of your mobile phone.Default Wi-Fi Name: EZVIZ_XXXXDefault Wi-Fi Password: 1234567890You  can  change  the  Wi-Fi  password  and name of the camera with the app.After restore default settings, the Wi-Fi name and Wi-Fi password are restored to default.Turn on Wi-Fi of the S1 camera.Connect the Wi-Fi of the camera and your phone.
145HFRUG 7DNH3KRWR 6KDUH…Open  EZVIZ  SPORTS  App.  You  can  set  the parameters as you requested.After configuration, you can use the App to record, take photo, share your video and so on.What you can do with EZVIZ SPORTSS1
16S1 Remote ControlUser Manual
1234561Display OLED Display2Power IndicatorRed steady when charging;Blue steady when fully charged.3Return/Set ButtonPress to enter setting interface of the current function˗When  in  the  sub-menu,  press  to return upper level menu.4Sensor UV Sensor5Switch ButtonSwitch to next mode or parameters6Power Button/OK ButtonPress to power on; press and hold for 3 seconds to power off˗When setting, press to enter.7USB PortExternal power supply (you can use the  USB  cable  and  power  adaptor of S1.)717AppearanceDescription
1280-6038:35/59:421235461S1 Current Mode2The first number indicates the resolution of video or photo. TheC second is the capture speed and delay interval.3Time already recorded and time left for recording/ Captured picture and picture number left for photo46Apprears when bluetooth is connected.5S1 Current BatteryLooping (Appears only in recording mode.)       :Recording        :Burst        :Photo        :Delay captureGUI DescriptionSee  Appendix  for    detailed  main  menu  modes descripion.18OSD Description
Use the USB port to charge the battert, when the power  indicator  goes  steady  blue,  the  battery  is fully charged. The battery life is 30 days.Press          , the remote is on. EZVIZ logo, verision, battery, bluetooth and S1 status will be displayed.Buttons  are  invalid  when  the  remote  is starting up.The  remote  shuts  down  automatically  if  it  is not connected to the S1 in 30 seconds.V1.2.2BLUETOOTHREMOTEBLUETOOTHCONNECTEDS1 POWER ONLO A DI NG . . .19Connect the powerStart up the remoteOperation
20Press the         and the         button at the same time  the  remote  starts  searching  the  S1 nearby.  1The remote and the S1 are paired by default. If tou use the remote to control another S1,or if you find the  bluetooth  icon  flickers when  starting  up,  you need to pair them before any operation.SEARCHING...Pair the S1 and the remote
21If the S1 is not found, it shows“S1  NOTFOUND”and  then  the  remote  shuts  down automatically.You  can  restart  the  S1  and  the  remote  and pair then again.SI NOT FOUNDAfter power on S1 for 10 seconds, the remote can find the S1 serial No..2EXIT123456789
22The  remote  enters  the  main  menu,  see  the  following figure.DŽPress          to switch to your S1 and press             to pair them.3BLUETOOTHCONNECTED1280-6038:35/59:42
23BLE  CLEAREDNEED RESETPress          and           to reset the remote to cancel the pairing.2Enter  the  main  menu  and  press            and           for 5 seconds.  1You can also cancel the pairing.Cancel remote and S1 pairing (Optional)
24Set S1 parameters as you demand.Enter  the  main  menu  and  press                ,  until  the           setting interface              shows. Press             to enter the setting menu.˖Switch to next item.˖Enter˖Return to previous item.After the S1 is powered off, the remote shows“POWER ON S1”. If you don’t power it on for 120  seconds,  the  remote  shuts  itself  down automatically.Start up the remote, if the S1 is powered off, you can power it on with the remote.POWER OFF S1 POWER ON S1Enter  the  main  menu  and  press            and           SettingsPower on/off S1Cancel remote and S1 pairing (Optional)
25Enter  the  main  menu  and  press                ,  until  the           You can press the           and           button to reset the remote. (Invalid when charging)When the remote is powered off for 20 minutes the bluetooth of S1 stops broadcasting. If you power on the remote, you need to press the power button of S1 or restart the S1 manually to pair the S1 and remote.Choose  the  setting  you  want  to  set,  press              the             to enter the setting interface directly. (QWHUPDLQPHQXPress the         to execute the current command.E.g. Press the           button when in burst mode. The S1 starts burst capture with the preset parametersPress  the            button  for  3  seconds  to  shut  the remote down.    No  operation  for  120  seconds,  the  remote goes to hiberate mode to save battery.Press the            button to activate the remote.S1 OperationShut down the remote
26Choose  the  setting  you  want  to  set,  press              the             to enter the setting interface directly.HDMIYou can connect the S1 to a display to view the photo and video stored.Connect  the  S1  and  display  with  HDMI  wire,  power on S1, and the remotes shows “HDMI”.Press          to switch; Press           to confirm.S1 Connecting to Display
27In the main menu of the reomte, thera are photo, burst, Delay, UV and power on/off S1.In photo mode, press the          button on the remote or the            button  on  S1  to  start  recording.    And  in  the remote, recording time is displayed.In photo mode, press the          button on the remote or the            button  on  S1  to  stop  recording.    And  in  the remote, remaining recording time is displayed.1280-6000:011280-6038:35/59:42Appendix Modes DescriptionRecord Mode
28In photo mode, press the          button on the remote or the         button on S1 to take a photo.  After  taking  the  photo,  the  number  of  photo  captured and the remaining capacity for photo are changed.12M386 / 532Photo Mode
29After burst capture, S1 is in standby mode. In burst  mode press  the            button on  the remote  or press the record button          on S1 to start capture.     Burst CaptureCapture many photos in a certain time;E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2SWhen you set it as 10PCS/2S, S1 captures 10 photos in 2 seconds.10PCS/2S386 / 532Burst Mode
30Press the         button on the remote or press the       button on the S1 camera to start delay capture.      Press the button again to stop capture.Capture after a pre-defined time.E.g.,  when  set  the  delay  time  as  0.5SEC,  press  the record/capture button, the camera capture 1 photo after 5 seconds.12M386 / 5320.5SECDelay Capture
31̚ No protection required.Wear sunhat and sunglassesMedium ̚Strong ̚ Wear sunhat, sunglasses and sunblocking cream.Very Strong ̚ Better not go outside between 10 ap and 4pm.Better not go outside.ExtremelyStrongWeakThe  remote  can  detect  the  UV  indicators  outdoor  to provide information for you to choose protection.309UV Level WeakUV ValueUV LevelUV Detector Mode
32POWER OFF S1Press button            when the menu shows”POWER OFF S1”to power it off.Press button           when the menu shows”POWER ON S1”to power it on.          You  can  set  the S1  parameters  with  the  remote.  E.g. video resolution, recording mode and so on.Power on/off S1Parameters Setting
33VideoResolutionParametersRecording  ModePhoto Resolution1920*1080  60fps˗1920*1080  30fps˗1280*720  120fps˗1280*720    60fps˗848*484    240fpsDescriptionIn order: The camera indicator goes bsteady blue. And you cannot record or take photo when micro SD has no space. Looping˖Video and photo stored in the  micro  SD  card  are  overwitten after SD card is full.Restricted  by  the  file  system formate, a video size cannot be more than 4G, it will be seperated it is over 4608*3456˄16MP˅˗3840*2880˄12MP˅˗3264*2448  ˄8MP˅˗2592*1944  ˄5MP˅Appendix Parameters Description
34ParametersDescriptionG-SensorEnabling  the  G-sensor,  S1  starts recording  when  senses  acceleration and  stops  recording  when  motion stops for 20 secondsSD Card StorageCheck  SD  card  space  and  free space. Delete latest file or all files.Delay CaptureBurst CaptureWi-FiGPSTurn on/ off Wi-FiEnabling  the  GPS  function,  the latitude  and  longitude  data  of  the video  or  photo  is  contained.  The longitude and latitude information can be  viewed with subtitle for  video  and EXIF tool for photo)Capture  after  a  pre-defined  time; 0.5SECǃ1SECǃ2SECǃ5SECǃ10SECǃ30SECǃ60SECCapture  many  photos  in  a  certain time; E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2S
35ParametersDescriptionRemote StandbyVersion InfoSet  the  remote  into  standby  time. You  can  choose  120  seconds  or cancel it.Check the information.
36PartsRestricted substances and elements declaration3E +J &G &UĎ 3%% 3%'(Medalh    Lensh    Curciut Boardh    Plastic     Displayh    Powerh    Controllerh    Accesoriesh    żPHDQVWKHWR[LFDQGKDUPIXOVXEVWDQFHVLQWKHDVVHPEO\units are within the limit stipulated by the of the SJ/T11363-2006 standard.× means the toxic and harmful substances in the assembly units exceed the limit stipulated by the SJ/T11363-2006 standard.Restricted Substances and Elements
37

Navigation menu