Hangzhou Hikvision Digital Technology CSREM Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2672078
Application ID	pLjHFOcdYGIhYL65xU90/g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.87kB (1210882 bits)
Date Submitted	2015-07-08 00:00:00
Date Available	2015-07-08 00:00:00
Creation Date	2015-07-07 11:19:02
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2015-07-07 03:19:08
Document Title	User Manual.pdf
Document Creator	Adobe Acrobat 10.0.0
Document Author:	Amy-D_Wang

Quick Start Guide
Please read the quick start guide carefully and keep it properly.
8'/%$
Table of Contents
6
Packing List
Camera Appearance
Operation

EZVIZ SPORTS APP

S1 Features
S1 Remote Control

Appearance

Main Menu

Operation

S1 Connects to Display

Appendix Modes Description

Appendix Parameters Description

Restricted substances or elements
identification
Packing List
Open the packet and check whether the S1
sports camera (Hereinafter referred to as S1)
and all accessoriess is in good condition.
USB Data Cable X1
S1 X1
Power Adaptor X1
Quick Start Guide X1
Appearance Description
10
11
12
13
14
1
Shutter
Start/Stop Shooting
Camera Status Blue steady: Standby;
Flicker: Camera is on.
Indicator
MIC
Audio Input
Lens
152°Wide Angel
Red light steady when charging.
Power Camera
Red light off when fully charged.
Indicator
USB Port
Micro SD
Card Slot
USB data trasfer
Micro SD Card Recommendation
70
micro HDMI
Power Button
70
70
70
10
Reset
HDMI Output
Press and hold for 1 second to
power on, 3 seconds to power
off.
Reset button.
11
Wi-Fi
Indicator
Purple filcker: Wi-Fi is turning
on.Blue Flicker: Wi-Fi is on.
12
Wi-Fi On/Off
Button
Press and hold 3 seconds to
switch the Wi-Fi on or off.
13
14
Standard Bracket Interface to all brackets.
Interface(1/4 inch)
Buzzer
Audio Alert
Operation
Step 1
Insert micro SD card.
Insert the micro SD card into the card slot.
Micro SD Card Recommendation
Step 2
Power on the camera.
Connect the power cable.
Use the USB cable to charge. When the power
indicator goes off, the power is fully charged.
You are recommended to fully charge the S1
when it is the first time you use it.
Power on the camera.
Press the
for one second, and you will hear
the buzzer alerts 5 times. The indicator blinks in
purple. When the indicator turns steady blue, the
S1 is power-on and standby.
Press the power button
and the Wi-Fi
button
at the same time to restore the
default settings.
Step 3
Start Recording
Start recording.
Press record button
once,the camera starts
recording, and the camera indicator flickers in
blue.
Stop recording.
Press record
button, the camera stops
recording, and the camera indicator is on
You can choose to switch record, capture,
burst snapshot with EZVIZ SPORTS App.
If no operation with in 120 seconds, the S1
camera shuts down automatically.
10
Step4
Connect to the display.
You can connect to the S1 to the display to vide the
video and picture.
Connect the S1 camera and the display with a HDMI
wire. Press the the power button
and the record
button
at the same time and then you can view
the video and picture stored on the micro SD card on
the display.
Display
HDMI Cable
mini HDMI Interface
11
EZVIZ SPORTS APP
Download and install the EZVIZ App, you can
get the live video, playback and control the
camera.
Download EZVIZ SPORTS App.
Use the mobile phone to scan the QR code or
search in the App Store to download the EZVIZ
SPORTS App.
12

Turn on Wi-Fi of the S1 camera.
Press the Wi-Fi
button for 3 seconds. When the
status indicator flickers in blue, the Wi-Fi is on.
Connect the Wi-Fi of the camera and your phone.
Turn on the Wi-Fi of your mobile phone.
Default Wi-Fi Name: EZVIZ_XXXX
Default Wi-Fi Password: 1234567890
You can change the Wi-Fi password and
name of the camera with the app.
After restore default settings, the Wi-Fi name
and Wi-Fi password are restored to default.
13

What you can do with EZVIZ SPORTS
Open EZVIZ SPORTS App. You can set the
parameters as you requested.
After configuration, you can use the App to record,
take photo, share your video and so on.
S1
…
5HFRUG
7DNH3KRWR
14
6KDUH
S1 Remote Control
User Manual
16
Appearance
Description
Display
Power
Indicator
OLED Display
Red steady when charging;
Blue steady when fully charged.
Press to enter setting interface of the
Return
current function˗
/Set Button
When in the sub-menu, press to
return upper level menu.
Sensor
UV Sensor
Switch
Switch to next mode or
Button
parameters
Power Button Press to power on; press and
hold for 3 seconds to power off˗
/OK Button
When setting, press to enter.
External power supply (you can use
USB Port
the USB cable and power adaptor
of S1.)
17
OSD Description
GUI Description
1280-60
38:35/59:42
S1 Current Mode
:Photo
:Recording
:Delay capture
:Burst
The first number indicates the resolution of video
or photo. TheC second is the capture speed and
delay interval.
Time already recorded and time left for recording/
Captured picture and picture number left for photo
S1 Current Battery
Looping (Appears only in recording
mode.)
Apprears when bluetooth is connected.
See Appendix for
descripion.
detailed main menu modes
18
Operation
Connect the power
Use the USB port to charge the battert, when the
power indicator goes steady blue, the battery is
fully charged. The battery life is 30 days.
 Start up the remote
Press
, the remote is on. EZVIZ logo, verision,
battery, bluetooth and S1 status will be displayed.
V1.2.2
BLUETOOTH
REMOTE
LOA DI NG . . .
S1 POWER ON
BLUETOOTH
CONNECTED
The remote shuts down automatically if it is
not connected to the S1 in 30 seconds.
Buttons are invalid when the remote is
starting up.
19

Pair the S1 and the remote
The remote and the S1 are paired by default. If tou
use the remote to control another S1,or if you find
the bluetooth icon flickers when starting up, you
need to pair them before any operation.
1 Press the
and the
button at the same
time the remote starts searching the S1
nearby.
SEARCHING...
20
2
After power on S1 for 10 seconds, the remote
can find the S1 serial No..
123456789
EXIT
If the S1 is not found, it shows“S1 NOT
FOUND”and then the remote shuts down
automatically.
SI NOT FOUND
You can restart the S1 and the remote and
pair then again.
21
3
Press
to switch to your S1 and press
to pair them.
BLUETOOTH
CONNECTED
The remote enters the main menu, see the
following figure.DŽ
1280-60
38:35/59:42
22
 Cancel remote and S1 pairing (Optional)
You can also cancel the pairing.
Enter the main menu and press
and
for 5 seconds.
BLE CLEARED
NEED RESET
Press
and
cancel the pairing.
23
to reset the remote to
Cancel remote and S1 pairing (Optional)
Enter the main menu and press
and
Power on/off S1
Start up the remote, if the S1 is powered off, you
can power it on with the remote.
POWER OFF S1
POWER ON S1
After the S1 is powered off, the remote shows
“POWER ON S1”. If you don’t power it on for
120 seconds, the remote shuts itself down
automatically.
Settings
Set S1 parameters as you demand.
Enter the main menu and press
setting interface
shows. Press
enter the setting menu.
˖Switch to next item.
˖Enter
˖Return to previous item.
24
, until the
to
Choose the setting you want to set, press
the
to enter the setting interface directly.
S1 Operation
(QWHUPDLQPHQX
Press the
to execute the current command.
E.g. Press the
button when in burst mode. The
S1 starts burst capture with the preset parameters
No operation for 120 seconds, the remote
goes to hiberate mode to save battery.
Press the
button to activate the remote.
Enter the main menu and press
, until the
Shut down the remote
Press the
remote down.
button for 3 seconds to shut the
You can press the
and
button to
reset the remote. (Invalid when charging)
When the remote is powered off for 20 minutes
the bluetooth of S1 stops broadcasting. If you
power on the remote, you need to press the
power button of S1 or restart the S1 manually
to pair the S1 and remote.
25
S1 Connecting to Display
Choose the setting you want to set, press
the
to enter the setting interface directly.
You can connect the S1 to a display to view the photo
and video stored.
Connect the S1 and display with HDMI wire, power
on S1, and the remotes shows “HDMI”.
HDMI
Press
to switch; Press
26
to confirm.
Appendix Modes Description
In the main menu of the reomte, thera are photo, burst,
Delay, UV and power on/off S1.
Record Mode
1280-60
38:35/59:42
In photo mode, press the
button on the remote or
the
button on S1 to start recording. And in the
remote, recording time is displayed.
1280-60
00:01
In photo mode, press the
button on the remote or
the
button on S1 to stop recording. And in the
remote, remaining recording time is displayed.
27
Photo Mode
12M
386 / 532
In photo mode, press the
button on the remote or
the
button on S1 to take a photo.
After taking the photo, the number of photo captured
and the remaining capacity for photo are changed.
28
Burst Mode
Capture many photos in a certain time;
E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2S
When you set it as 10PCS/2S, S1 captures 10 photos in 2
seconds.
10PCS/2S
386 / 532
In burst mode press the
button on the remote or
press the record button
on S1 to start capture.
Burst Capture
After burst capture, S1 is in standby mode.
29
Delay Capture
Capture after a pre-defined time.
E.g., when set the delay time as 0.5SEC, press the
record/capture button, the camera capture 1 photo after
5 seconds.
12M 0.5SEC
386 / 532
Press the
button on the remote or press the
on the S1 camera to start delay capture.
Press the button again to stop capture.
30
button
UV Detector Mode
The remote can detect the UV indicators outdoor to
provide information for you to choose protection.
UV Value
309
UV Level
UV Level Weak
Weak
̚
No protection required.
Medium
̚
Wear sunhat and sunglasses
Strong
̚
Very
Strong
̚
Wear sunhat, sunglasses and
sunblocking cream.
Better not go outside between 10
ap and 4pm.
Extremely 
Strong
Better not go outside.
31
Power on/off S1
Press button
when the menu shows”POWER OFF
S1”to power it off.
Press button
when the menu shows”POWER ON
S1”to power it on.
POWER OFF S1
Parameters Setting
You can set the S1 parameters with the remote. E.g.
video resolution, recording mode and so on.
32
Appendix Parameters Description
Parameters
Video
Resolution
Description
1920*1080 60fps˗
1920*1080 30fps˗
1280*720 120fps˗
1280*720 60fps˗
848*484
240fps
In order: The camera indicator goes
bsteady blue. And you cannot record
or take photo when micro SD has no
space.
Looping˖Video and photo stored in
Recording
Mode
the micro SD card are overwitten
after SD card is full.
   Restricted by the file system
formate, a video size cannot be more
than 4G, it will be seperated it is over
Photo
Resolution
4608*3456˄16MP˅˗
3840*2880˄12MP˅˗
3264*2448 ˄8MP˅˗
2592*1944 ˄5MP˅
33
Parameters
Description
Capture after a pre-defined time;
Delay Capture 0.5SECǃ1SECǃ2SECǃ5SECǃ
10SECǃ30SECǃ60SEC
Capture many photos in a certain
Burst Capture
time; E.g.5PCS/1S,10PCS/1S,
10PCS/2S,30PCS/1S,30PCS/2S
Wi-Fi
Turn on/ off Wi-Fi
GPS
Enabling the GPS function, the
latitude and longitude data of the
video or photo is contained. The
longitude and latitude information can
be viewed with subtitle for video and
EXIF tool for photo)
Enabling the G-sensor, S1 starts
G-Sensor
recording when senses acceleration
and stops recording when motion
stops for 20 seconds
SD Card
Check SD card space and free
space. Delete latest file or all files.
Storage
34
Parameters
Description
Set the remote into standby time.
Remote Standby You can choose 120 seconds or
cancel it.
Version Info
Check the information.
35
Restricted Substances and Elements
Restricted substances and elements declaration
Parts
3E
+J
&G
&UĎ
3%%
3%'(
Medal
˜
˜
˜
˜
˜
Lens
˜
˜
˜
˜
˜
Curciut
Board
˜
˜
˜
˜
˜
Plastic
˜
˜
˜
˜
˜
˜
Display
˜
˜
˜
˜
˜
Power
˜
˜
˜
˜
˜
Controller
˜
˜
˜
˜
˜
Accesories
˜
˜
˜
˜
˜
ĹźPHDQVWKHWR[LFDQGKDUPIXOVXEVWDQFHVLQWKHDVVHPEO\
units are within the limit stipulated by the of the
SJ/T11363-2006 standard.
× means the toxic and harmful substances in the assembly
units exceed the limit stipulated by the SJ/T11363-2006
standard.
36
37


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 41
Create Date                     : 2015:07:07 11:19:02+08:00
Title                           : User Manual.pdf
Producer                        : GPL Ghostscript 8.64
Author                          : Amy-D_Wang
Creator                         : Adobe Acrobat 10.0.0
Modify Date                     : 2015:07:07 03:19:08Z

EXIF Metadata provided by EXIF.tools