Hangzhou Hikvision Digital Technology KB6003 Wi-Fi Video Doorbell User Manual

Hangzhou Hikvision Digital Technology Co., Ltd. Wi-Fi Video Doorbell

User Manual

For Cerficaon [Dra]
Wi-Fi Video Doorbell
Quick Start Guide
Quick Start Guide
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures, graphs are the properes of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be “Hikvision”). This user manual
(hereinaer referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, parally or
wholly, by any means, without the prior wrien permission of Hikvision. Unless otherwise spulated, Hikvision
does not make any warranes, guarantees or representaons, express or implied, regarding to the Manual.
About this Manual
The Manual includes instrucons for using and managing the product. Pictures, charts, images and all other
informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is
subject to change, without noce, due to firmware updates or other reasons. Please find the latest version in
the company website (hp://overseas.hikvision.com/en/).
Visit the company website (hp://overseas.hikvision.com/en/) to get the manuals, client soware, and
developing tools.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned below are the properes of their respecve owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modificaon not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If
this equipment does cause harmful interference to radio or television recepon, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your
body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
EU Conformity Statement
● The working temperature of the device is from -30° C to 50° C .
All the electronic operaon should be strictly compliance with the electrical safety regulaons, fire prevenon
regulaons and other related regulaons in your local region.
● Please use the power adapter, which is provided by normal company. The power consumpon cannot be less
than the required value.
● Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
● Please make sure that the power has been disconnected before you wire, install or dismantle the device.
● When the product is installed on wall or ceiling, the device shall be firmly fixed.
● If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
● If the product does not work properly, please contact your dealer or the nearest service center. Never aempt
to disassemble the device yourself. (We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
● Do not drop the device or subject it to physical shock, and do not expose it to high electromagnesm
radiaon. Avoid the equipment installaon on vibraons surface or places subject to shock (ignorance can cause
equipment damage).
● Do not place the device in extremely hot (refer to the specificaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not expose it to high electromagnec radiaon.
● The device cover for indoor use shall be kept from rain and moisture.
● Exposing the equipment to direct sun light, low venlaon or heat source such as heater or radiator is
forbidden (ignorance can cause fire danger).
● Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is
not a malfuncon however), and affecng the endurance of sensor at the same me.
● Please use the provided glove when open up the device cover, avoid direct contact with the device cover,
because the acidic sweat of the fingers may erode the surface coang of the device cover.
● Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline
detergents.
● Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you need to return
the device to the factory with the original wrapper. Transportaon without the original wrapper may result in
damage on the device and lead to addional costs.
● Improper use or replacement of the baery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used baeries according to the instrucons provided by the baery
manufacturer.
Symbol Convenons
The symbols that may be found in this document are defined as follows.
Provides addional informaon to emphasize or supplement important points of
the main text.
Indicates a potenally hazardous situaon, which if not avoided, could result in
equipment damage, data loss, performance degradaon, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following
two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operaon of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitaon est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce potenal radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intenon des autres
ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your
body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et votre corps.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Direcve
2014/30/EU, RE Direcve 2014/53/EU, the RoHS Direcve 2011/65/EU.
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentaon for specific
baery informaon. The baery is marked with this symbol, which may include leering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more informaon see: www.recyclethis.info
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated
collecon points. For more informaon see: www.recyclethis.info
Appearance
IR Light
Screw 1
Screw 2
Lens
Backlight Indicator TF Card Slot RESET Buon
Call Buon
Mic
Name Descripon
IR Light
Backlight
Indicator
Screw 1&2
Auto light source for night vision. The lights are behind the panel.
You can see the lights when they are on.
These 2 screws are used to connect the power cable.
Solid blue: The doorbell is starng up and running properly.
Cycling blue and red: Wi-Fi is not connected.
Flashing red: The doorbell is upgrading.
Flashing blue: The doorbell is speaking with the app.
Solid red: The doorbell is under the low illuminaon mode.
.
.
.
.
.
.
.
Name Descripon
TF Card Slot For TF card. If a TF card is used, snapshots and video files will be
stored in the TF card. You would need to inialize it via the
Hik-Connect app.
RESET Buon If the doorbell has not been acvated, hold down the
buon for 5 seconds to enter the Wi-Fi connecon mode.
The backlight indicator cycles blue and red.
If the doorbell has acvated, hold down the buon for 5
seconds to restore the factory sengs.
1 2 3 4 5 6
● Do not drop the device or subject it to physical shock, and do not expose it to high electromagnesm
radiaon. Avoid the equipment installaon on vibraons surface or places subject to shock (ignorance can cause
equipment damage).
● Do not place the device in extremely hot (refer to the specificaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not expose it to high electromagnec radiaon.
● The device cover for indoor use shall be kept from rain and moisture.
● Exposing the equipment to direct sun light, low venlaon or heat source such as heater or radiator is
forbidden (ignorance can cause fire danger).
● Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is
not a malfuncon however), and affecng the endurance of sensor at the same me.
● Please use the provided glove when open up the device cover, avoid direct contact with the device cover,
because the acidic sweat of the fingers may erode the surface coang of the device cover.
● Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline
detergents.
● Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you need to return
the device to the factory with the original wrapper. Transportaon without the original wrapper may result in
damage on the device and lead to addional costs.
● Improper use or replacement of the baery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used baeries according to the instrucons provided by the baery
manufacturer.
Installaon
1Connect the power cable.
Loosen the screws on the back panel of the doorbell, and put the loop of the
power cable into the screws, and then ghten them.
3Install the doorbell.
Fix the doorbell body to the installaon posion with 2 screws.
Put the faceplate cover the doorbell body.
Use 1 set screw to fix the faceplate with the doorbell body.
2 Install the TF card.
Insert the TF card into the card slot on the side of the doorbell.
1
1
2
3
4
1
1
2
2
3
3
Operaons Doorbell Funcons
Power on the Doorbell
Pull power cables from the wall, and connect them with two power cables
(included in the box content) via a power connector.
When the blue light is on, the doorbell is powered on. You can acvate the
doorbell and set the Wi-Fi connecon via Hik-Connect app.
Hik-Connect Setup
Connect your mobile device to Wi-Fi.
Download and install the Hik-Connect app by searching “HIik-Connect” in
App store or Google PlayTM.
Log into Hik-Connect
Connect your mobile device to Wi-Fi.
Start the Hik-Connect app, and input the Hik-Connect user account to log
into the Hik-Connect app.
Launch the app and register for a Hik-Connect user account.
The power adapter or the transformer is not included.
● The messages will be pushed automacally by enabling Message Push
Noficaon.
● The app can receive the triggered alarm automically when the doorbell is
powered on by enabling Auto-Receive Alarm aer Powering on.
Power Cable
TF Card
Step 1 Step 2
OR
Add Doorbell to Hik-Connect Account
Step 3
Scan QR Code
- In the Home page, tap “+” on the upper-right corner to add a camera.
- Scan the QR code on the front panel of the doobell body or on the rear
panel of the doorbell.
Link Hik-Connect Account
- Input the verificaon code of the doorbell in the popup interface aer
acvaon.
- Tap OK buon to finish adding the doorbell to the Hik-Connect account.
Acvate Doorbell
The acvaon interface will pop up aer finishing the Wi-Fi connecon.
- Set and input a password to acvate the doorbell.
- Tap Acvate buon in the next interface to finish acvang.
- -
Connect Wi-Fi
The network connecon interface will pop up aer scanning the QR code of
the doorbell successfully.
- Tap Connect to a Network buon.
- Choose Wireless Connecon to set the Wi-Fi connecon.
- Input the Wi-Fi password that your mobile phone has connected to.
- Tap Next to start the Wi-Fi connecon.
Via the Hik-Connect app, you can realize some certain funcons of the doorbell
(including, but not limited to, live view, and remote playback).
Launch the Hik-Connect app and you can get the live view of the connected devices.
Live View
…… ……
- Check the TF card status by tapping on the Storage Status in the Device
Sengs interface.
- If the TF card status displays as Uninialized, tap to inialize it. The status will
then change to Normal. You can then start recording any event triggered
video in the camera such as moon detecon.
Recording
Launch the Hik-Connect app, tap a connected device and tap Gallery buon
to play back.
Playback
Launch the Hik-Connect app and tap Message to see the alarm messages, such
as moon detecon alarm message.
Alarm Noficaon
7 8 9 10 11 12 13
Power
Connector
Wall Doorbell

Navigation menu