Hangzhou Hikvision Digital Technology KB6003 Wi-Fi Video Doorbell User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3368076
Application ID	uOuSuqtdb+H2W8h3sHk19A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	163.13kB (2039153 bits)
Date Submitted	2017-04-24 00:00:00
Date Available	2017-04-24 00:00:00
Creation Date	2017-02-08 20:35:09
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-02-08 20:35:09
Document Title	[For Certification]_Quick Start Guide of Wi-Fi Doorbell_复制
Document Creator	Adobe Illustrator CS6 (Windows)

Wi-Fi Video Doorbell
Quick Start Guide
Quick Start Guide
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual
(hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision
does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in
the company website (http://overseas.hikvision.com/en/).
Visit the company website (http://overseas.hikvision.com/en/) to get the manuals, client software, and
developing tools.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
For Certification [Draft]
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your
body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your
body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Provides additional information to emphasize or supplement important points of
the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury.
● The working temperature of the device is from -30° C to 50° C .
All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention
regulations and other related regulations in your local region.
● Please use the power adapter, which is provided by normal company. The power consumption cannot be less
than the required value.
● Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
● Please make sure that the power has been disconnected before you wire, install or dismantle the device.
● When the product is installed on wall or ceiling, the device shall be firmly fixed.
● If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
● If the product does not work properly, please contact your dealer or the nearest service center. Never attempt
to disassemble the device yourself. (We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
● Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism
radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause
equipment damage).
● Do not place the device in extremely hot (refer to the specification of the device for the detailed operating
temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
● The device cover for indoor use shall be kept from rain and moisture.
● Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is
forbidden (ignorance can cause fire danger).
● Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is
not a malfunction however), and affecting the endurance of sensor at the same time.
● Please use the provided glove when open up the device cover, avoid direct contact with the device cover,
because the acidic sweat of the fingers may erode the surface coating of the device cover.
● Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline
detergents.
● Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return
the device to the factory with the original wrapper. Transportation without the original wrapper may result in
damage on the device and lead to additional costs.
● Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
Appearance
Mic
IR Light
Lens
Screw 1
Backlight Indicator
Screw 2
TF Card Slot
RESET Button
Call Button
Description
Name
Description
Name
IR Light
Auto light source for night vision. The lights are behind the panel.
You can see the lights when they are on.
For TF card. If a TF card is used, snapshots and video files will be
TF Card Slot stored in the TF card. You would need to initialize it via the
Hik-Connect app.
Backlight
Indicator
Screw 1&2
Solid blue: The doorbell is starting up and running properly.
Cycling blue and red: Wi-Fi is not connected.
Flashing red: The doorbell is upgrading.
Flashing blue: The doorbell is speaking with the app.
Solid red: The doorbell is under the low illumination mode.
These 2 screws are used to connect the power cable.
RESET Button . If the doorbell has not been activated, hold down the
button for 5 seconds to enter the Wi-Fi connection mode.
The backlight indicator cycles blue and red.
. If the doorbell has activated, hold down the button for 5
seconds to restore the factory settings.
Operations
Installation
Connect the power cable.
Loosen the screws on the back panel of the doorbell, and put the loop of the
power cable into the screws, and then tighten them.
Install the doorbell.
1 Fix the doorbell body to the installation position with 2 screws.
2 Put the faceplate cover the doorbell body.
3 Use 1 set screw to fix the faceplate with the doorbell body.
Doorbell Functions
Step 1
Step 2
Step 3
Power on the Doorbell
Hik-Connect Setup
Add Doorbell to Hik-Connect Account
Pull power cables from the wall, and connect them with two power cables
(included in the box content) via a power connector.
When the blue light is on, the doorbell is powered on. You can activate the
doorbell and set the Wi-Fi connection via Hik-Connect app.
Connect your mobile device to Wi-Fi.
Download and install the Hik-Connect app by searching “HIik-Connect” in
App store or Google PlayTM.
OR
Power Cable
Install the TF card.
Scan QR Code
- In the Home page, tap “+” on the upper-right corner to add a camera.
- Scan the QR code on the front panel of the doobell body or on the rear
panel of the doorbell.
Connect Wi-Fi
The network connection interface will pop up after scanning the QR code of
the doorbell successfully.
- Tap Connect to a Network button.
- Choose Wireless Connection to set the Wi-Fi connection.
- Input the Wi-Fi password that your mobile phone has connected to.
- Tap Next to start the Wi-Fi connection.
Log into Hik-Connect
Insert the TF card into the card slot on the side of the doorbell.
Wall
Doorbell
Connect your mobile device to Wi-Fi.
Start the Hik-Connect app, and input the Hik-Connect user account to log
into the Hik-Connect app.
TF Card
The power adapter or the transformer is not included.
Launch the app and register for a Hik-Connect user account.
Power
Connector
10
Via the Hik-Connect app, you can realize some certain functions of the doorbell
(including, but not limited to, live view, and remote playback).
Activate Doorbell
The activation interface will pop up after finishing the Wi-Fi connection.
- Set and input a password to activate the doorbell.
- Tap Activate button in the next interface to finish activating.
Link Hik-Connect Account
- Input the verification code of the doorbell in the popup interface after
activation.
- Tap OK button to finish adding the doorbell to the Hik-Connect account.
11
……
……
Recording
- Check the TF card status by tapping on the Storage Status in the Device
Settings interface.
- If the TF card status displays as Uninitialized, tap to initialize it. The status will
then change to Normal. You can then start recording any event triggered
video in the camera such as motion detection.
Alarm Notification
Launch the Hik-Connect app and tap Message to see the alarm messages, such
as motion detection alarm message.
messages will be pushed automatically by enabling Message Push
Notification.
● The app can receive the triggered alarm automically when the doorbell is
powered on by enabling Auto-Receive Alarm after Powering on.
● The
Live View
Launch the Hik-Connect app and you can get the live view of the connected devices.
Playback
Launch the Hik-Connect app, tap a connected device and tap Gallery button
to play back.
12
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : [For Certification]_Quick Start Guide of Wi-Fi Doorbell_复制
Metadata Date                   : 2017:02:08 20:35:09+08:00
Modify Date                     : 2017:02:08 20:35:09+08:00
Create Date                     : 2017:02:08 20:35:09+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 88
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10131 bytes, use -b option to extract)
Instance ID                     : uuid:3c2e3614-9f64-41ed-8835-718e1a8c3416
Document ID                     : xmp.did:229269EDFAEDE6118AE19A3378C1B9BF
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:86f8d883-7904-4a55-8834-378261e14a12
Derived From Document ID        : xmp.did:1D09D70DC2D8E6118702D5D37695E691
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:1D09D70DC2D8E6118702D5D37695E691, xmp.iid:229269EDFAEDE6118AE19A3378C1B9BF
History When                    : 2017:01:12 20:24:24+08:00, 2017:02:08 20:34:26+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\a.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Note.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Danger.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Warning.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Warning.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Warning.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Note.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\Note.png, C:\Users\daijun5\Desktop\UD_Baseline_Quick Start Guide of Wireless Door Station_V1.4.6_2017\hikvision.jpg, D:\04_基线说明书&光盘\1401\制作素材\中间图标-1.png
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 665.000236
Max Page Size H                 : 105.000826
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Calibri-Light, Calibri, Calibri-Bold, TimesNewRomanPSMT, AdobeSongStd-Light
Font Family                     : Arial, Calibri, Calibri, Calibri, Times New Roman, Adobe 宋体 Std
Font Face                       : Regular, Light, Regular, Bold, Regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.22, Version 2.10, Version 5.74, Version 5.74, Version 5.22, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False
Font File Name                  : arial.ttf, calibril.ttf, CALIBRI.TTF, CALIBRIB.TTF, times.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Cathreen.Dai,
Bounding Box                    : 13 -661 1872 -26
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools