Hangzhou Wistar Mechanical and Electric Technology WISTAR-RE602 Emitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3258296
Application ID	ZqQhQFVAPegZN9IqxJfRSQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	189.14kB (2364293 bits)
Date Submitted	2017-01-13 00:00:00
Date Available	2017-01-14 00:00:00
Creation Date	2017-01-09 15:20:45
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-01-10 11:39:49
Document Title	RE601,RE602,RE601-I,RE602-I使用说明书-英20170109.cdr
Document Creator	CorelDRAW
Document Author:	Administrator

11.03.03.SMS-RE601/602YT-02-V1
Emitter Instruction for RE601/RE602/RE601-i/RE602-i series
1. Product appearance
3. Code learning
4 channel emitter
25%
25%
UP
50%
50%
STOP
75%
75%
DOWN
Channel Switch
WSRE602-i
Four Channels
Featured 3 intermediate Limits
Position: 25%,50%,75%
1). Short press the Channel Switch
Button to select a channel (from 1
to 4), once selected, the
corresponding light will shine.
2). Press UP and DOWN buttons
simultaneously once.
3). Then short press the Stop
button, now the code learning
of the selected channel is
successful. other channels to
learn code in the same way.
4. Group control
Example: RE602 series could set four Channels, each channel with corresponding button and light.
2. Technique Data
Power: 3v Model CR2032
Currency：≤16mA
Working Temperature: -20℃ to +60℃
Frequency：433.92MHz
Code: rolling code
a). During Sleep Mode(all lights are off),press any one switch button once, could check
which channel have been set(corresponding light will shine).
b). During channel checking (channel light are on), press the channel switch button again.
If the channel haven’t ever is set, it will be set now, if the channel have ever been set , it
will be deleted now and corresponding light off.
01
11.03.03.SMS-RE601/602ZX-02-V1
1.03.03.SMS-RE601/602YT-02-V1
Emitter Instruction for RE601/RE602/RE601-i/RE602-i series
5. Percentage control
25%
50%
75%
After code learning successful, press the left buttons 25%,50%,70%,
could control the percentage.
6. bracket installation
Way1：Direct wall installation
Way2：American insert installation
! Note
If you need set group control, you have to add or delete channels within 3-4s after checking channel.
Only after code learning successful ,you can control the percentage.
You’d better not press the emitter’s buttons too long so as to prolong the battery . The button press should be
about 0.5s with 1s interval.
The emitter will stop working if the battery is in low power. Please replace the battery in this case.
02
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : RE601,RE602,RE601-I,RE602-I使用说明书-英20170109.cdr
Create Date                     : 2017:01:09 15:20:45+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:01:10 11:39:49+08:00
Metadata Date                   : 2017:01:10 11:39:49+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:cf40c20b-fb6a-43e6-861b-455b39cd11d8
Instance ID                     : uuid:6aea1139-286a-48c4-a8a0-3403edf55ced
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools