Hansol LCD 720NF CRT Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	150968
Application ID	aESbbymkf2Gy6n+KkJ022g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.98kB (99763 bits)
Date Submitted	2001-05-21 00:00:00
Date Available	2001-05-21 00:00:00
Creation Date	2001-05-18 14:03:56
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2001-05-18 14:04:00
Document Title	User Manual

FCC Information
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced Radio/TV technician for help.
DECLARATION OF CONFORMITY
PRODUCT NAME : 17" COLOR MONITOR
MODEL NUMBER : 720NF
FCC RULES : TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT : FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT :
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions : (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Package
Safety Information
Features
Power management system
Installation
Connection to your personal computer.
Pin assignment table D-sub mini 15 pin connector
Controls
OSD Menus
English
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment can generates, uses, and radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful inteference to radio
Communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause unacceptable interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
Introduction
Troubleshooting
No picture
Image is scrolling or unstable
Picture is fuzzy
Picture bounces or a waving pattern is present in the picture
Edges of the display image are not square
Display image is not centered, too small, or too large
13
13
13
13
13
13
Specifications
Electrical specifications
Mechanical specifications
Environmental specifications
14
14
14
Appendix
Preset Timings
15
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canadian Notice
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
HANSOL MULTITECH, INC.
7001, VILLAGE DRIVE, SUITE 255, BUENA PARK, CA. 90621, USA
TEL : (714)562-5151
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Notice
The information contained in this document is subject to change without notice.
User’s Manual
User’s Manual
Introduction
Introduction
Features
Congratulations on your purchase of this top quality color monitor!
The items illustrated below are contained in the carton.
First, be sure that your carton includes all of them.
If any items are missing or damaged, please contact your local dealer or supplier.
Superior image
On Screen menu fingertip control system to visually select and adjust screen using buttons on
front panel and on screen menus.
The exclusive double dynamic focus system with a hyperbolic focus compensation circuit
controls the electron beams resulting in a fine image display over the entire area of the screen.
Super contrast screen for superior contrast and richer color.
Advanced INVAR Shadow mask for superior focus, brightness and color.
17", 0.25 Aperture grill pitch high resolution, non-interlaced technology provides sharp, flickerfree images.
On screen menu color control system easily allows the white of the image to be adjusted as
well as R.G.B signals, resulting in true-to-life colors.
Ergonomic Design
Display Monitor
AC Power Input Cable
Safety information
Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It
may be suitable for connection to any UL listed personal computer with similar configuration.
Before making the connection ensure that the voltage rating of the computer convenience
outlet is the same as the monitor and that the ampere rating of the computer convenience
outlet is equal to or exceeds the monitor current rating.
For 120Volt applications use only UL listed detachable power cord with NEMA configuration
5-15P type(parallel blades) plug cap.
For 240Volt applications use only UL listed detachable power cord with NEMA configuration
6-15P type(tandem blades) plug cap.
Use only a power source and connection appropriate for the monitor as indicated on the
marking label.
Slots and openings in the cabinet are provided for ventilation;
these openings must not be blocked or covered. Never push objects of any kind into cabinet
slots or other openings.
Never insert anything metallic into the monitor openings.
Doing so may create a danger of electric shock.
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitor s case.
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp, lint-free cloth for cleaning.
Install the monitor near an outlet that you can reach easily. Disconnect the product by
grasping the plug firmly and pulling in from the outlet.
Never disconnect it by pulling the cord.
User’s Manual
Flat, square screen to reduce image distortion and glare, thus relieving eye strain.
Tilt base allowing 90 rotation in the horizontal and 17 in the vertical for greater user comfort.
Low-leak radiation prevention meeting MPR II and the very stringent TCO (option) magnetic
field emissions standards for increased user safety.
Environmentally Friendly
Power management circuit conforming to VESA DPMS standards controls energy
consumption when monitor is not in use, you save energy.
All plastic parts are recyclable. All materials are strictly selected to ensure ease of
maintenance, inspection and disposal.
Timing
Automatic tracking of horizontal frequencies of 30 to 95 kHz,and vertical frequencies of
47 to 160 Hz.
Thirteen timings are factory preset for image size and position
Ten additional timings are user definable.
Synchronizing separate input signal.
User’s Manual
ENGLISH
Package
Installation
Introduction
System Flexibility
CAUTION
Ensure that both the PC and the display monitor are switched off.
Automatic universal power supply is built in permitting AC power input of 100 - 240V AC, 50
or 60Hz.
Self-test menu allows the display unit to be checked on screen without connecting to a
computer.
Compact case minimizes desktop space giving you a large screen image without loss of
workspace.
Power cable included easily plugs into a standard outlet.
To attach the monitor to your system, as
shown in the following illustrations.
1. Insert the AC power cord into monitor
and then into an AC power outlet.
2. Connect the signal cable to the 15pin
graphics connector of the system and
tighten the fastening screws.
Power management system
This monitor complies with VESA, Nutek, and Energy Star power saving requirements. The
power saving system works only when used with VESA DPMS compliant PC’s and/or graphic
controllers.
State
On
Stand by
Suspend
Off
LED
Green
Green
Amber
Amber/Blink
Power
Normal (100 Watts)
65 Watts
15 Watts
5 Watts
Recovery Time
N/A
2 Sec
5 Sec
15 Sec
The monitor goes into various power saving stages depending on the incoming
video signal as shown in the following table
State
On
Stand by
Suspend
Off
Horizontal Sync
On
Off
On
Off
Vertical Sync
On
On
Off
Off
Note
The monitor automatically goes through the DPMS steps when it is idle.
To release the monitor from the DPMS condition, press any key on the keyboard or mouse.
User’s Manual
ENGLISH
Connection to your computer
Equipped with DDC1, DDC2B and DDC2Bi for Plug & Play compatibility.
Monitor is compatible with VGA, SVGA, VESA and high resolution video modes up to
1600(H) 1200(V) @ 75Hz
Monitor may be used with IBM or compatible PC, MAC.
3. To turn on the monitor, push the power
switch.
Note : To attach the monitor to the Macintosh system, please contact an authorized
dealer.(Need to use a special adaptor)
Pin assignment table D-Sub Mini 15pin connector
Pin No.
10
11
12
13
14
15
Assignment
Red Video
Green Video
Blue Video
Frame Ground
Ground
Red Video Ground
Green Video Ground
Blue Video Ground
N.C
Sync. Ground
Ground
SDA
H-Sync.
V-Sync.
SCL
The 15-pin D-Sub connector
(male) of the signal cable
(IBM Systems) :
10
11
15
(15 Pin D-Sub)
User’s Manual
Controls
"ON SCREEN MENU" controls include the following extended controls such as Size, Position,
Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved instantly. The
currently addressed control can be reset to factory settings by pressing the Reset button.
OSD Menu
ENGLISH
OSD controls
Controls
Main Menu
OSD main menu allows you to adjust user controls.
POSITION
Function of OSD buttons on the front of the monitor
: In the main menu, exits the OSD controls. In a submenu, exits to the OSD main menu.
/+
1) When no OSD on the Screen,
: Direct access to Brightness controls.
+ : Direct access to Contrast controls.
2) When Main menu is displayed. : Moves to function what you want to adjust.
3) When the Sub menu is displayed. : Controls the amount what you want to adjust.
MENU : Displays OSD main Menu.
1) When Main menu is displayed. : Selects function with RED ICON.
2) When Sub menu is displayed. : Selects function with RED ICON.
Additional front controls
Power Switch : Turns the monitor power on or off. When the power is on, the LED is on.
LED Power indicator Light : Located left side of the power switch and indicates the monitor's
power mode. Each mode reduces the amount of power used by the monitor.
PRESS MENU KEY
Use the
: Control buttons to scroll through all of the menus.
Main Menu control guide
: Exits the OSD controls.
: Move the function to choose.
: Proceed to the selected menu.
Contrast Menu
48KHz
60Hz
NN
CONTRAST
: Exits the Contrast menu.
: Increase or decrease the Contrast.
: Exits the Brightness menu.
: Increase or decrease the Brightness .
Accessing on screen menu
Press MENU Button.
Turning off on screen menu
When in the main menu, press
button.
When in submenus, press
button twice.
99%
Brightness Menu
31.5KHz
60HzPP
BRIGHTNESS
50%
User’s Manual
User’s Manual
Controls
Controls
Position Menu
V. POSITION
H. POSITION
74%
32%
After choosing
, Push MENU( ) button.
MEUN( ) : Push this button again & again to change the H/V-position.
: Moves the image vertically up or down.
: Moves the image horizontally left or right.
Size Menu
V. SIZE
H. SIZE
ENGLISH
Atfer choosing
, push MENU( ) button.
Pincushion : Increase or decrease the curvature of the sides either inward or outward.
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increase or decrease the curvature of the sides.
Top Corner : Increase or decreases the curvature of the top sides.
Bottom Corner : Increase or decrease the curvature of the bottom sides.
Rotation : Rotate the entire display to clockwise or counterclockwise.
Geometry Menu control guide
: Exit to the main menu.
: Move the function to choose.
MENU( ) : Function to choose.
: Move the bow in the
or
direction to increase or decrease the adjustment.
Moire Menu
MOIRE CONTROL
42%
H. MOIRE ADJUST
After choosing
, Push MENU( ) button.
MENU ( ) : Push this botton again & agiain to change the H/V-size.
: Increases or Decreases the vertical size of the image.
: Decreases or Increases the horizontal size of the image.
V. MOIRE ADJUST
43%
Position and size Menu control guide
After choosing
, Push MENU( ) button.
Select ON or OFF with
key.
Select H.MOIRE or V.MOIRE with
key.
: Adjust the Moire.
50%
Language Menu
LANGUAGE
After choosing
, Push MENU(
: Select the language.
: Exit to the main menu.
: Refer to
MENU( ) : Toggle position and menu directly.
PRESS DO KEY
Geometry Menu
GEOMETRY
OSD Position Menu
PINCUSHION
PARALLELOGRAM
TRAPEZOID
PINBALANCE
TOP CORNER
BOTTOM CORNER
ROTATION
The Geometry controls allow you to adjust the
curvature or angle of displayed image.
50%
10
User’s Manual
)button.
After choosing
, Push MENU( )button.
MENU ( ): Push this button again & again to
change the H/V-position.
: Move the OSD menu Vertical bottom or
Horizontal left.
POSITION
PRESS
KEY
: Move the OSD menu Vertical top or
Horizontal right.
User’s Manual
11
Troubleshooting
Introduction
COLOR TEMP MENU
RB
GB
BB
RG
USER
USER
Presetting
6500K
GG BG
50%
9300K
Select the desired color setting. The bar is replaced by the color setting choice.
" USER, 6500K, 9300K "
Color adjustment is available only in USER mode.
: Move the bar with
or
key to select the user
MENU( ) : Press MENU button for 5 seconds.
: Increcse or decrease the selected coldr adjustment.
(Exit) : Exit to the main menu.
ENGLISH
No picture
Color Temp Menu
Check that the AC cord is correctly connected.
Check that the AC socket is live by plugging in another piece of equipment.
Power switch and computer power switch should be in position.
Ensure that the signal cable is properly connected to the video card or PC.
Ensure that the video card is securely seated in the PC.
Check the connector for bent or pushed-in pins.
Press a key on the keyboard or move the mouse, in case the screen power-saver mode has
blanked the screen.
Image is scrolling or unstable
Signal cable should be securely attached to the computer.
Check the pin assignments and signal timings of the monitor and your video card with respect
to recommended timings and pin assignments.
Ensure that the video card is securely seated in the PC.
Picture is fuzzy
Adjust the Contrast and Brightness Controls.
Push the Degauss Button once.
Caution : A minimum interval of 20 minutes should exist before the Degauss Button is used a
second time. Do not hold the button down continuously.
Picture bounces or a waving pattern is present in the picture
Move electrical devices that may be causing electrical interference away from the monitor.
See the inside front cover of this manual for FCC information.
Unshielded audio speakers placed next to the monitor can cause picture distortion. Move the
speakers away.
Edges of the display image are not square
Adjust the distortion using the Side Pincushion or Trapezoid Pincushion Balance, Parallel
adjustment controls under the on screen menu.
Display image is not centered, too small, or too large
Adjust the horizontal and vertical image sizes using the Horizontal and Vertical Size
adjustment controls under the on screen menu.
12
User’s Manual
User’s Manual
13
Specifications
Appendix
Preset Timings
ITEM
720NF
CRT Type
17 , 90 deflection FST
CRT Aperture grill pitch
0.25mm
CRT Surface
Non-glare
Sync
Input
Signal
Video
Horizontal
Scanning
frequency
Vertical
This Monitor 720NF has preset modes for the 13 most popular industry standards for Plug and
Play capability.
Horizontal
H/V Separate, TTL, positive/negative
75
Terminated
Display Size (Standard)
Horizontal 306mm, Vertical 230mm
Resolution
120 Watts
AC 100~240Volt, 50/60Hz
3Hz
Input Connector
D-Sub, 15Pin Connectors
Display Colors
Unlimited
Mechanical Specifications
720NF
16.3 (W) 17.0 (D) 16.6 (H)
415mm(W) 433mm(D) 422mm(H)
Dimension
Carton
Weight
20.9 (W) 21.9 (D) 21.3 (H)
530mm(W) 555mm(D) 540mm(H)
Net
37.5Ibs (17.0Kg)
Gross
44.8Ibs (20.3Kg)
Environmental Specifications
ITEM
Temperature
14
720NF
Operating
32 F to 104 F (0 C to 40 C)
Storage
-4 F to 140 F (-20 C to 60 C)
Humidity
User’s Manual
Sync
47Hz~160Hz (Automatically)
205 MHz
Unit
Sync
30kHz~95kHz (Automatically)
Pixel Clock (Max.)
ITEM
Video
RGB Analog (0.7Vp-p), positive
1600Dots 1200Lines (Non-interlace)
Power Supply
Video
H/V Composite, TTL, positive/negative
Maximum Resolution
Power Consumption (Max.)
Vertical
10% to 85% R.H. Non-condensing
Timing
H-Freq(kHz)
A sec
B sec
C sec
D sec
E sec
V-Freq(Hz)
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate(MHz)
H-Polarity
V-Polarity
Resolution
Timing
H-Freq(kHz)
A sec
B sec
C sec
D sec
E sec
V-Freq(Hz)
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate(MHz)
H-Polarity
V-Polarity
IBM
VGA/70Hz
720 400
31.469
31.777
3.813
1.907
25.422
0.636
70.09
14.268
0.064
1.08
12.711
0.413
28.322
Negative
Positive
VGA/60Hz
640 480
31.469
31.777
3.813
1.907
25.422
0.636
59.94
16.684
0.064
1.048
15.253
0.318
25.175
Negative
Negative
640/85Hz
640 480
43.269
23.111
1.556
2.222
17.778
1.556
85.008
11.764
0.069
0.578
11.093
0.023
36
Negative
Negative
800/75Hz
800 600
46.875
21.333
1.616
3.232
16.162
0.323
75
13.333
0.064
0.448
12.8
0.021
49.5
Positive
Positive
VESA
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz
1024 768 1280 1024 1280 1024 1600 1200
68.677
79.976
91.146
93.75
14.561
12.504
10.971
10.667
1.016
1.067
1.016
0.948
2.201
1.837
1.422
1.501
10.836
9.481
8.127
7.901
0.508
0.119
0.406
0.316
84.997
75.025
85.024
75
11.765
13.329
11.761
13.333
0.044
0.038
0.033
0.032
0.524
0.475
0.579
0.491
11.183
12.804
11.235
12.8
0.015
0.013
0.011
0.011
94.5
135
157.5
202.5
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
VESA
800/85Hz
800 600
53.674
18.631
1.138
2.702
14.222
0.569
85.061
11.756
0.056
0.503
11.179
0.019
56.25
Positive
Positive
640/67Hz
640 480
35
28.571
2.116
3.175
21.164
2.116
66.667
15
0.086
1.114
13.714
0.086
30.24
Negative
Negative
1024/75Hz
1024 768
60.023
16.660
1.219
2.235
13.003
0.203
75.029
13.328
0.050
0.466
12.795
0.017
78.750
Positive
Positive
MACINTOSH
832/75Hz
832 624
49.726
20.11
1.117
3.91
14.524
0.559
74.551
13.414
0.06
0.784
12.549
0.02
57.284
Negative
Negative
User’s Manual
1152/75Hz
1152 870
68.681
14.560
1.280
1.440
11.520
0.320
75.062
13.322
0.044
0.568
12.667
0.044
100
Negative
Negative
15
ENGLISH
Electrical Specifications

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2001:05:18 14:03:56
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Modify Date                     : 2001:05:18 14:04:00+09:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools