Hansol LCD B19CL-1 CRT Monitor User Manual B19AL

Hansol LCD Inc. CRT Monitor B19AL

User Manual

Download: Hansol LCD B19CL-1 CRT Monitor User Manual B19AL
Mirror Download [FCC.gov]Hansol LCD B19CL-1 CRT Monitor User Manual B19AL
Document ID277419
Application IDUNK77qoc613PQx6Q1WA1jw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize59.99kB (749834 bits)
Date Submitted2002-10-16 00:00:00
Date Available2002-10-16 00:00:00
Creation Date2000-08-03 19:00:16
Producing SoftwareAcrobat Distiller 4.0.5 for Macintosh
Document Lastmod2002-10-08 10:51:32
Document TitleB19AL¿µ¹®
Document CreatorQuarkXPress: PSPrinter 8.3.1
Document Author: ¾çÀÌ

User s Manual
19 Inch (Viewable size 18 )
High Resolution Color Monitor
(B19CL)
Printed on the recyclable paper
Printed in Korea
Part No. 942149060001 - 02
FCC Information
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inteference to radio
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
English
Communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause unacceptable interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
Introduction
Package
Features
Safety Information
Power Management System
Installation
Connection to your computer
Pin assignment table D-Sub mini 15 pin connector
Controls
Function of controls
OSD Menu
Troubleshooting
Troubleshooting Guide
13
Specifications
Electrical specifications
14
Mechanical specifications
14
Environmental specifications
14
Appendix
Preset timings
User’s Manual
15
User’s Manual
Introduction
Introduction
Caution
ENGLISH
Features
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
19-inch(18 inch visual)high performance display color monitor
Warning
If this equipment has more than one interface connector, do not leave cables connected to
unused interfaces.
Automatically scans frequencies from
- Horizontal frequency: 30 to 96KHz
- Vertical frequency: 47 to 150Hz
Canadian Notice
This Class B digital apparatus meets all requirements of the Cannadian Interference Causing
Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to
1600 1200.
Supports VESA flicker free modes including 85Hz refresh rate.
On Screen menu fingertip control system to visually select and adjust screen images using
6 buttons on front panel and on screen menus.
Notice
The information contained in this document is subject to change without notice.
Power supply operates on AC100~240Volt 60/50Hz for use all over the world.
Package
First, we would like to thank you for your purchase of this monitor. This monitor is 19inch, high
resolution, color display monitor. This manual covers the use, and points of caution, when
operating this monitor.
Please take the time to read this manual so that you will obtain the best performance and most
use from your monitor. After reading the manual, store it in a safe place for future reference.
This items illustrated below are contained in the carton.
First, be sure that your carton includes the following items.
If any items are missing or damaged, please contact your local dealer or supplier.
Equipped with DDC 1/2B for Plug & Play capability.
Equipped with an energy-saving feature.
Power management circuit when signaled by the computer system, will reduce power
consumption when the computer system is not in use.
Monitors with nonglare/antistatic screens are compliant with MPR
1990 Emissions standards and meets requirements for CE Marking.
TCO : (option)
B19AL
- Color Monitor
- AC Power input cable
- User’s Manual (Warranty Registration Card)
- Signal Cable (15pin 3layer D-sub)
User’s Manual
User’s Manual
Introduction
Introduction
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
It may be suitable for connection to any UL listed personal computer with similar
configuration. Before making the connection ensure that the voltage rating of the computer
convenience outlet is the same as the monitor and that the ampere rating of the computer
convenience outlet is equal to or exceeds the monitor current rating.
For 120Volt applications use only UL listed detachable power cord with NEMA configuration
5-15P type(parallel blades) plug cap.
For 240Volt applications use only UL listed detachable power cord with NEMA configuration
6-15P type(tandem blades) plug cap.
Use only a power source and connection appropriate for the monitor as indicated on the
marking label.
Slots and openings in the cabinet are provided for ventilation;
these openings must not be blocked or covered. Never push objects of any kind into cabinet
Power management system
This monitor meets VESA(Video Electronics Standards Association) DPMS(Display Power
Management Signalling)standards. In order for the monitor s power saving feature to function,
the video board or computer must also meet VESA® DPMSTM standards.
Power management table
State
Sync
Horizontal
Vertical
Video
LED Color
Power
Consumption
Normal
Operation
Active
Active
Active
Green
120W
Power saving function mode
Standby
Suspend Mode Power-Off Mode
Inactive
Active
Inactive
Active
Inactive
Inactive
Blanked
Blanked
Blanked
Green/AMBER
AMBER
AMBER Blinking
Less than
Less than
Less than
80% of MAX
15W
3W
Note : The monitor automatically goes through the DPMS steps when it is idle.
To release the monitor from the DPMS condition, press any key on the keyboard.
slots or other openings.
Never insert anything metallic into the monitor openings.
Doing so may create a danger of electric shock.
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitor s case.
Connection to your computer
CAUTION
Ensure that both the PC and the display monitor are switched off.
To attach the monitor to your system, as shown in
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp, lint-free cloth for cleaning.
the following illustrations.
1. Connect the signal cable
Install the monitor near an outlet that you can reach easily. Disconnect the product by
grasping the plug firmly and pulling in from the outlet.
to the 15pin
graphics connector of the system and tighten
the fastening screws.
Never disconnect it by pulling the cord.
2. Insert the AC power cord into monitor and
then into an AC power outlet.
3. To turn on the monitor, push the power switch.
Note : To attach the monitor to the Macintosh system, please contact an authorized
dealer.(Need to use a special adaptor)
User’s Manual
User’s Manual
ENGLISH
Safety information
Installation
Controls
Pin assignment table D-Sub Mini 15pin connector
15 Pin D-Sub
Red Video
Green Video
Blue Video
Frame Ground
N.C
Red Ground
Green Ground
Blue Ground
Macintosh
Red Ground
Red Video
H/V Sync
Sense (0)
Green Video
Green Ground
Sense (1)
N.C
10
11
12
13
N.C
Sync. Ground
Ground
SDA
H-Sync.
Blue Video
Sense (2)
Ground
V-Sync.
Blue Ground
14
15
V-Sync.
SCL
Ground
H-Sync.
ENGLISH
Pin No.
Additional up front controls
Power Switch : Turns the monitor power on or off, When the power is on, the LED is lit.
Accessing on screen menu
10
11
15
Turning off on screen menu
(15 Pin D-Sub)
Press DO Button.
Controls
: Direct Brightness access.
Controls
: Direct Contrast access.
When in the main menu, press exit button.
When in submenus, press the exit button twice.
OSD Menus
15
(Macintosh Adaptor)
Main Menu
“ON SCREEN MENU”s Main Menu of Controls gives you an overview of the selection of controls
available.
CONTRAST
Function of controls
OSD Controls
“ON SCREEN MENU” controls include the following extended controls such as Size, Position,
Geometry Distortion, Color temp, Degauss, Moire on & off, Language, OSD-Position, Recall,
OSD
Cont & Brt, etc.
EXIT
DO
50 %
Function of OSD buttons on the front of the monitor
DO : In the main menu, proceeds to the selected menu .
In a submenu, proceeds to the control in that sub-menu.
Controls
: Move the function to select one of the controls.
Controls
: In the main menu, moves the fuction to select one of the controls.
In a submenu, moves the bar in the or direction to increase or
decrease the adjustment.
Use the
or
: Control buttons to scroll through all of the menus.
Main Menu control guide
EXIT : Exit the OSD controls.
Controls
: Move the function to choose.
Controls
: Move the function to choose.
DO : Proceed to the selected menu choice.
EXIT : In the main menu, exit the OSD controls. In a submenu, exit to the OSD main menu.
User’s Manual
User’s Manual
Controls
Controls
31.5KHz
60Hz
31.5KHz
PP
CONTRAST
60Hz
PP
BRIGHTNESS
50%
50%
EXIT : Exit the Brightness or Contrast menu.
Cursor
: Increase or decrease the Brightness
Cursor
: Increase or decrease the Contrast.
Position Menu
POSITION
: Move the image vertically up or down.
: Move the image horizontally left or right.
ENGLISH
Geometry Controls Menu
Contrast & Brightness Menu
GEOMETRY
PINCUSHION
PARALLELOGRAM
TRAPEZOID
PINBALANCE
TOP CORNER
BOTTOM CORNER
ROTATION
The Geometry controls allow you to adjust the
curvature or angle of displayed image.
50%
Pincushion : Increase or decrease the curvature of the sides either inward or outward.
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increase or decrease the curvature of the sides.
Top Corner : Increase or decreases the curvature of the top sides.
Bottom Corner : Increase or decrease the curvature of the bottom sides.
Rotation : Rotate the entire display clockwise or counterclockwise.
Geometry Menu Control Guide
PRESS
KEY
EXIT : Exite to the main menu.
Controls
Controls
: Move the function to choose.
: Move the bar in the or direction to increase or decrease the
adjustment.
Size Menu
SIZE
: Increase or decrease the vertical size of the
image.
: Increase or decrease the horizontal size of the
image.
PRESS
KEY
Language Menu
LANGUAGE
: Select the language using
ENGLISH
DEUTSCH
FRANCAIS
ESPAÑOL
PORTUGUÊS
key.
PRESS DO KEY
Position and Size Menu control guide
EXIT : Exit to the main menu.
Controls
Controls
: Refer to Tall/Short (or
: Refer to Narrow/Wide (or
Moire Control
DO : Toggle position and size menu directly.
MOIRE CONTROL
: Select the H.Moire or V.Moire Adjust.
: Adjust the Moire
H. MOIRE ADJUST
V. MOIRE ADJUST
50%
10
User’s Manual
User’s Manual
11
Controls
Troubleshooting
OSD Position Menu
POSITION
: Moves the OSD Position vertically up or down.
: Moves the OSD Position horizontally left or
right.
PRESS
If your monitor is not performing properly, please use the following troubleshooting chart for
quick solutions to common problems.
KEY
Problem
Color Adjust Controls Menu
COLOR - TEMP
RB
OSD
GB
USER
USER
6500K
BB
RG
GG BG
No Picture
Controls
: Move the bar in the or
(USER, 6500K, 9300K).
direction to select the color setting
DO : Proceed to the selected Submenu choice (Press DO button for 5 seconds).
Presetting : Select the desired color setting. The bar is replaced by the color setting choice
“USER, 6500K or 9300K” Each color setting is adjusted at user mode to choose
Picture is
unstable
degree or Kelvin.
Controls
Information
Video Level
D-Sub/BNC
Degauss
Recall
Zoom Menu
User’s Manual
ICON
Possible cause
Remedy
Is the power cord connected?
Connect power cord.
Is the power switch on?
Turn on power switch.
Is the signal cable properly
connected?
Connect signal cable properly
Is the monitor in the power save
mode?
Press any key on the keyboard or
move the mouse.
Is the signal cable properly
connected?
Connect signal cable properly
Are there signals which are
outside of the required frequency
range?
Input signals which are within the
range of the monitor.
Is the signal connector pin
assigments correct?
Use correct signal connector.
Are there signals which are
outside of the required frequency
range?
Use correct signal which within the
frequency range of the monitor(If
the signal is correct, adjust the
controls to desired image.)
Is the magnetic object nearby?
Move object far away.
Is the pin arrangement of the
signal connector correct?
Use correct signal cable.
Use degauss control.
50%
9300K
EXIT : Exit to the main menu.
Controls
: Increase or decrease the Selected color adjustment.
12
ENGLISH
Troubleshooting guide
Function
This control shows the Factory and user mode
information.
This control allows the video input level selection applied
by signal source. (0.7Vp-p/1.0Vp-p)
This control allows the video input type selection.
(BNC/D-SUB)
This control removes the build-up of magnetic fields that
can affect color purity and convergence.
Note : The picture shakes while degaussing is taking
place. After internal degaussing the circuitry takes about
30 minutes to regain its maximum power.
This controls recalls certain factory setting such as size,
position, geometry and color by pressing DO button.
If the monitor is operation in a user mode, this controls
has no effect.
: Increase or decrease the Vertical and Horizontal size
of image at the same time.
The display
image is not
centered, too
small or large.
The color of
image on screen
is abnormal.
User’s Manual
13
Specifications
Appendix
ITEM
B19CL
CRT Type
19 , 90 deflection, FST
CRT Dot pitch
0.26mm (0.22 in Hor.)
CRT Surface
This Monitor B19AL has preset modes for the 14 most popular industry standards for Plug and
Play capability.
Horizontal
Non-glare, ARASC
Sync
Input
Signal
H/V Separate, TTL, positive/negative
Video
Video
Sync
Sync
H/V Composite, TTL, positive/negative
Video
Scanning
frequency
Horizontal
Vertical
Maximum Resolution
RGB Analog (0.7Vp-p), positive
75
Terminated
30KHz~96KHz (Automatically)
47Hz~150Hz (Automatically)
1600Dots 1200Lines (Non-interlace)
Pixel Clock(Max.)
202.5 MHz
Display Size (Standard)
Horizontal 350mm, Vertical 262mm
Power Consumption
Power Supply
Resolution
120 W
AC 100~240Volt 50/60Hz
3Hz
Input Connector
D-Sub, 15Pin Connectors
Display Colors
Unlimited
Mechanical Specifications
ITEM
B19CL
Unit
Carton
Weight
18.5 (W) 18.9 (D) 18.5 (H)
470mm(W) 487mm(D) 470mm(H)
Dimension
21.6 (W) 22.6 (D) 22.4 (H)
548mm(W) 574mm(D) 568mm(H)
Net
23.1Kg (50.9Ibs)
Gross
28.1Kg (61.9Ibs)
Environmental Specifications
ITEM
Temperature
Humidity
14
Vertical
User’s Manual
B19CL
Operating
32 F to 104 F (0 C to 40 C)
Storage
-4 F to 140 F (-20 C to 60 C)
10% to 85% R.H. Non-condensing
Timing
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
Resolution
Timing
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
IBM
VGA/70Hz VGA/60Hz
640 480
720 400
31.469
31.469
31.777
31.777
3.813
3.813
1.907
1.907
25.422
25.422
0.636
0.636
70.09
59.94
14.268
16.684
0.064
0.064
1.08
1.048
12.711
15.253
0.413
0.318
28.322
25.175
Negative
Negative
Positive
Negative
640/75Hz
640 480
37.5
26.667
2.032
3.81
20.317
0.508
75
13.333
0.08
0.427
12.8
0.027
31.500
Negative
Negative
640/85Hz
640 480
43.269
23.111
1.556
2.222
17.778
1.556
85.008
11.764
0.069
0.578
11.093
0.023
36
Negative
Negative
VESA
800/75Hz
800 600
46.875
21.333
1.616
3.232
16.162
0.323
75
13.333
0.064
0.448
12.8
0.021
49.5
Positive
Positive
800/85Hz
800 600
53.674
18.631
1.138
2.702
14.222
0.569
85.061
11.756
0.056
0.503
11.179
0.019
56.25
Positive
Positive
1024/75Hz
1024 768
60.023
16.660
1.219
2.235
13.003
0.203
75.029
13.328
0.050
0.466
12.795
0.017
78.750
Positive
Positive
VESA
MACINTOSH
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz 640/67Hz
832/75Hz 1152/75Hz
1024 768 1280 1024 1280 1024 1600 1200 640 480
832 624 1152 870
68.677
79.976
91.146
93.75
35
49.726
68.681
14.561
12.504
10.971
10.667
28.571
20.11
14.560
1.016
1.067
1.016
0.948
2.116
1.117
1.280
2.201
1.837
1.422
1.501
3.175
3.91
1.440
10.836
9.481
8.127
7.901
21.164
14.524
11.520
0.508
0.119
0.406
0.316
2.116
0.559
0.320
84.997
75.025
85.024
75.000
66.667
74.551
75.062
11.765
13.329
11.761
13.333
15
13.414
13.322
0.044
0.038
0.033
0.032
0.086
0.06
0.044
0.524
0.475
0.579
0.491
1.114
0.784
0.568
11.183
12.804
11.235
12.800
13.714
12.549
12.667
0.015
0.013
0.011
0.011
0.086
0.02
0.044
94.5
135
157.5
202.5
30.24
57.284
100
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Negative
Negative
Negative
User’s Manual
15
ENGLISH
Preset Timings
Electrical Specifications

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2000:08:03 19:00:16
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Author                          : ¾çÀÌ
Creator                         : QuarkXPress: PSPrinter 8.3.1
Title                           : B19AL¿µ¹®
Modify Date                     : 2002:10:08 10:51:32+09:00
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSAB19CL-1

Navigation menu