Hansol LCD D17DL-1 17" CRT MONITER User Manual model

Hansol LCD Inc. 17" CRT MONITER model

MANUAL

  User’s Guide 730D(D17DL) COLOR MONITOR Regulatory Information.......................................................................................................................... 2 Introduction Features ...................................................................................................................................................3 Controls OSD Controls ...........................................................................................................................................4 OSD Menus ..............................................................................................................................................5 Power Management Feature................................................................................................................. 8 Standard Signal Table ............................................................................................................................ 8 Specifications .......................................................................................................................................... 9 Pin assignment table D-Sub Mini 15pin connector ...................................................................... 10 Troubleshooting .....................................................................................................................................11Table of Contents
Color Monitor 2 Regulatory Information - FCC Information CautionChanges or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment. - Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. - Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur duCanada. - Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star guidelines for energy efficiency.NoticeThe information contained in this document is subject to change without notice.This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause unacceptable interference to radio and television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.  Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help.
Color Monitor 3 Introduction - Features The exclusive double dynamic focus system with a hyperbolic focus compensation circuit controls the electron beams resulting in a fine image display over the entire area of the screen. Super contrast screen for superior contrast and richer color. Advanced INVAR Shadow mask for superior focus, brightness and color. On screen menu color control system easily allows the white of the image to be adjusted as well as R.G.B signals, resulting in true-to-life colors.Ergonomic Design Flat, square screen to reduce image distortion and glare, thus relieving eye strain. Low-leak radiation prevention meeting MPR Ⅱ and the very stringent TCO(optin) magnetic field emissions standards for increased user safety.Environmentally Friendly Power management circuit conforming to VESA DPMS standards controls energy consumption when monitor is not in use, you save energy. All plastic parts are recyclable. All materials are strictly selected to ensure ease of maintenance, inspection and disposal.Timing Automatic tracking of horizontal frequencies of 30 to 95 kHz, and vertical frequencise of 50 to 160 Hz. Ten timings are factory preset for image size and position. Ten additional timings are user definable.System Flexibility Equipped with DDC1, DDC2B and DDC2Bi for Plug & Play compatibility. Monitor is compatible with VGA, SVGA, VESA and high resolution video modes up to 1600(H) x 1200(V) @ 75Hz. Automatic universal power supply is built in permitting AC power input of 100 - 240V AC, 50 or 60Hz. Power supply operates on AC 200-240V( ±10%), 50/60Hz for use all over the world.(Europe Version) Self-test menu allows the display unit to be checked on screen without connecting to a computer.Superior image
Color Monitor4 Controls - OSD controlsFunction of OSD buttons on the front of the monitor In the main menu, exits the OSD controls. In a submenu, exits to the OSD main menu. － / + 1) When no OSD on the Screen, － : Direct access to Brightness controls. + : Direct access to Contract controls. 2) When Main menu is displayed. : Moves to function what you want to adjust. 3) When the Sub menu is displayed. : Controls the amount what you want to adjust. MENU : Displays OSD main Menu. 1) When Main menu is displayed. : Selects function with RED ICON. 2) When Sub menu is displayed. : Selects function with RED ICON.Additional front controls Power Switch : Turns the monitor power on or off. When the power is on, the LED is on. LED Power indicator Light : Located left side of the power switch and indicates the monitor's power mode. Each mode reduces the amount of power used by the monitor.Accessing on screen menuPress MENU Button.Turning off on screen menuWhen in the main menu, press button.When in submenus, press the button twice."ON SCREEN MENU" controls include the following extended controls such as Size, Position,Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved instantly. The currently addressed control can be reset to factory settings by pressing the Reset button.
Color Monitor 5 ControlsOSD MENU MENU CONTROL1. NO OSD Proceeds to NO.2－ Proceeds to NO.3+ Proceeds to NO.4 No meaning2. MAIN MENU The function with RED ICON is- Performed : Recall, Degauss- Selected and blinked : Color Adjust, Zoom- Proceeded : Others－ + Moves to function you want. Exit to No.13. BRIGHTNESS Moves to No.2－ Decreases the brightness+ Increases the brightness Exit to No.14. CONTRASTMoves to No.2－ Decreases the contrast+ Increases the contrast Exit to No.15. H/V-POSITION Toggles horizontal or vertical position－ Moves the image down or left in the selected function.+ Moves the image up or right in the selected function. Exit to No.26. H/V-SIZEToggles horizontal or vertical size－ Shrinks the image in the selected function.+ Expands the image in the selected function. Exit to No.2 - OSD Menu
Color Monitor 67. GEOMETRY Odd press: Selects and blinks the function with RED ICON.－ + Controls the amount of the Selected function. (Refer to Geometry controls menu in detail) Exit to No.2Even press : Stops blinking and ready to move function you want.－ + Moves to function you want. Exit to No.28. MOIRE Odd press: Selects and blinks the function with RED ICON.－ + Controls the amount of the seleccted function. Please control these key in order the image not to shiver. Exit to No.2Even press: Stops blinking and ready to move function you want.－ + Moves to function you want.9. LANGUAGE Selects the languages withRED ICON and Exit to No.2.－ + Moves to language you want. Exit to No.210. OSD POSITION Toggles OSD positionhorizontally or vertically.－ Moves the OSD menu left or down in the selected function.+ Moves the OSD menu right or up in the selected function. Exit to No.211. COLOR MODEOdd press: Blinks the RED ICON - color menu ICON.－ + Moves to color mode you want and the selected “color mode” will blink. Exit to No.1Even press: Stops blinking and ready to move function you want.－ + Moves to function you want. Exit to No.1When the color mode ICONis blinking in user mode, press,then go to color adjust modeNo.12.－
Color Monitor 712. COLOR ADJUST MODERB - Red background rasterGB - Green background rasterBB - Blue background rasterRG - Red level gainGG - Green level gainBG - Blue level gainOdd press: Selects and blinks the function you want.－ + Controls the amount of function you want. Exit to No.11Even press : Stops blinking and ready to move function you want.－ + Moves to function you want. Exit to No.1113. ZOOM Odd press: Selects zoom and blinks the zoom ICON.－ Shrinks the image horizontally and vertically.+ Expands the image horizontally and vertically. Exit to No.1Even press: Stops blinking and ready to move another function.－ + Moves to the function you want. Exit to No.1Recall ( )Recall control to the factory setting resets all the controls within the all menu.If you want to return to the factory mode setting, press menu key on RecallICON.Degauss( )Eliminates the build-up of stray magnetic fields which alter the correct scan ofthe electron beams and affect the purity of the screen colors, focus, and convergence. When pressed, you screen image will jump and waver abit as the screen is demagnetized.※Geometry Controls Menu•Pincushion : Increases or decreases the curvature of the sides either inward or outward.•Parallelogram : Increases or decreases the tilt of the sides either to the left or right.•Trapezoid : Increases or decreases the bottom of the screen to be the same as the top.•Pin Balance : Increases or decreases the curvature of the sides either to the left or right.•Rotation : Increases or decreases the tilt of the screen image relative to a horizontal line.Caution : Please allow a minimum of 20 minutes to elapse between uses of the Degauss button. Do no hold the button down continuously to avoid decreasing the life the Deguass circuitry.The Geometry controls allow you to adjust the curvature orangle of the sides of you display.
Color Monitor 8 Power Management FeatureThe monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association(VESA).The power management feature requires that the video card of the computer should support DPMS function. Standard Signal TableStatus LED Sign Power ConsumptionNormal mode Green 100 WattsDPMS mode LED Off Less than 5 WResolution Horizontal Frequency(kHz)Vertical Frequency(Hz)Clock Frequency(MHz)Sync Polarity(H/V)VGA (720 x 400) 31.469 70.087 28.322 － / +VGA (640 x 480) 31.469 59.940 25.175 － / －VGA (640 x 480) 43.269 85.008 36.000 － / －VGA (720 x 400) 37.927 85.039 35.500 － / －SVGA (800 x 600) 46.875 75.000 49.500 + / +SVGA (800 x 600) 53.674 85.061 56.250 + / +XGA (1024 x 768) 60.023 75.029 78.750 + / +XGA (1024 x 768) 68.677 84.997 94.500 + / + SXGA (1280 x 1024) 79.976 75.025 135.000 + / + SXGA (1280 x 1024) 91.146 85.024 157.500 + / + UXGA (1600 x 1200) 93.750 75.000 202.500 + / +No image is displayed with Green blinkingMonitor is in power saving mode.Use mouse or keyboard to release power saving mode.No image is displayed without LED on.Power cable plug must be pulled out.Check the power plug on monitor and on the wall."Out of range" displayed on the screen.This message is displayed when the signal from video card exceeds the maximumfrequency of the monitor. Readjust resolution and frequency in accordance with the monitorcapacity.(Refer to Standard Signal Table)..
Color Monitor9 Specifications ITEM 730D(D17DL)CRT Type 17", 90° deflection FLATCRT Horizontal Dot pitch 0.20mmCRT Surface Non-glare, Anti-Reflection & Anti-StaticInputSignalSync. H/V Separate, TTL, positive/negativeH/V Composite, TTL, positive/negativeVideo RGB Analog (0.7Vp-p), positive75 Ω TerminatedScanningfrequencyHorizontal 30KHz~95KHz (Automatically)Vertical 50Hz~160Hz (Automatically)Maximum Resolution 1600Dots x 1200Lines (Non-interlace)Pixel Clock(Max.) 157.8 MHzDisplay Size (Standard) Horizontal 306mm, Vertical 230mmPower Consumption(Max.) 100 WattsPower Supply AC 100~240Volt, 60/50Hz ±3HzAC 220~240V( ±10%), 50/60Hz ±3Hz(Europe Version)Input Connector D-Sub, 15Pin ConnectorsDisplay Colors UnlimitedDimension Unit 15.6" (W) x 16.2" (D) x 16.1"(H) / 397mm(W) x 412.7mm(D) x 410.2mm(H)Carton 18.1" (W) x 20.3" (D) x 18.1"(H) / 460mm(W) x 515mm(D) x 460mm(H)Weight Net 34.8lbs (15.8kg)Gross 38.1lbs (17.3kg)TemperatureOperating 32℉ to 104℉ (0℃ to 40℃)Storage -4℉ to 140℉ (-20℃ to 60℃)Humidity 10% to 85% R.H. Non-condensing
Color Monitor 10 Pin assignment table D-Sub Mini 15pin connectorzThe 15-pin D-Sub connector(male) of the signal cable(IBM Systems) :1 5610 11 15(15 Pin D-Sub)Pin No. Assignment1Red Video2 Green Video3Blue Video4 Frame Ground5Ground6 Red Video Ground7Green Video Ground8 Blue Video Ground9 N.C10 Sync. Ground11 Ground12 SDA13 H-Sync.14 V-Sync.15 SCL
Color Monitor 11 Troubleshooting Problem SolutionNo picture  Check that the AC cord is correctly connected. Check that the AC socket is live by plugging in another piece of equipment. Power switch and computer power switch should be in position. Ensure that the signal cable is properly connected to the video card or PC. Ensure that the video card is securely seated in the PC. Check the connector for bent or pushed-in pins. Press a key on the keyboard or move the mouse, in case the screen power-saver mode has blanked the screen.Image is scrolling or unstable  Signal cable should be securely attached to the computer. Check the pin assignments and signal timings of the monitor and your video card with respect to recommended timings and pin assignments. Ensure that the video card is securely seated in the PC.Picture is fuzzy  Adjust the Contrast and Brightness Controls. Push the Degauss Button once.Picture bounces or a wavingpattern is present in the picture Move electrical devices that may be causing electrical interference away from the monitor. See the inside front cover of this manual for FCC information. Unshielded audio speakers placed next to the monitor can cause picture distortion. Move the speakers away.Edges of the display image arenot square Adjust the distortion using the Side Pincushion or Trapezoid Pincushion Balance, Parallel adjustment controls under the on screen menu.Display image is not centered,too small, or too large Adjust the horizontal and vertical image sizes using the Horizontal and Vertical Size adjustment controls under the on screen menu.Caution A minimum interval of 20 minutes should exist before the Degauss Buttonis used a second time. Do not hold the button down continuously.

Navigation menu