User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2350157 |
| Application ID | Yr6Nrh8aCuJLRSItgfKGPQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 326.1kB (4076226 bits) |
| Date Submitted | 2014-08-07 00:00:00 |
| Date Available | 2014-08-11 00:00:00 |
| Creation Date | 2014-07-29 11:15:43 |
| Producing Software | AFPL Ghostscript 8.54 |
| Document Lastmod | 2014-07-29 11:15:43 |
| Document Title | User Manual |
| Document Creator | FreePDF 4.00 - http://shbox.de |
| Document Author: | wakeyouw |
GoSpeak! Prom
Ultra-Portable PA System
VP3320
VP3420
VP3520
Vp3420 User's Guidefieviswonfijm4,07,25mdd 1 @ 7/25/14 11:20AM ‘
\_:I:|:I:l_\
vp3420U5er‘sGuldeifievlsloniBi2O14707725Indd 2 @ 7/25/14 1120AM
l—IEEIQ—l
Introduction
Congratulations on your purchase of the GoSpeak! Pro Ultra,
Portable PA System. This innovative public address system
weighs less than 5 pounds and carries in a laptop tote—bag
(included). Seteup and break down of the Go Speak! Pro takes
just minutes.
If you’ve purchased the GoSpeak! Pro with Wireless
Microphone (model VP3420) it includes a wireless lapel
microphone. The Go Speak Pro with Wireless Microphone
(model VP3530) includes a handheld wireless microphone.
Both models feature an integrated microphone receiver.
Additional GoSpeak! Pro Wireless Microphones may be
purchased (Lapel VP3421 and Handheld VP3521) for use with
either model.
The GoSpeak! Pro (model #VP3320) cannot be used with
additional GoSpeak Wireless Nficrophones, but is compatible
with third-party wireless microphone systems such as the
Audio Technica PRO 88W7830.
Page 1
vp3420 User‘s GuideiFievisloniB72014¥07425 indd 1 @ 7/25/14 11 .20 AM
l_:|:l:|:l@
Package Contents
GOSpeak! Pro
Model No.
VP3320 VP3420
VP3520
GoSpea k!
Pro speaker V
\/
integrated
wireless
microphone
receiver
\/
Wireless
Lapel
Microphone
Wireless
Handheld
Microphone
Power cable
Carrying case
User's Guide
prllg 2
Vp3420 User's Guide,Fievision,B,2014707,25 indd 2 @
’\\’\ \
7/25/14 1120 AM
l_:l:|:l:l@ :1?
Setting up GoSpeak! Pro
Setting up your GoSpeak! Pro takes just minutes. Follow the
steps below:
1. Unfold the GoSpeakf Pro speaker.
2. Plug the AC power cord into your GoSpeak! Pro, and
then into the a 1 107120V AC wall outlet.
3. Turn the Master Volume control on your GoSpeak!
Pro all the way counterclockwise (sound 01?).
Note: avoid turning on your GoSpeak! Pro speaker until you
have connected your microphone.
Page 3
VD342OUSSI'SGUICb,FleVISOn,B,2014707725Indd 3 @ 7/25/14 112OAM
_l lillll_ l_
The GoSpeak! Pro Control Panel
Your GoSpeakl Pro control panel is located in the upper left quadrant
ofthe left Speaker ( :15 shown) Components and controls include:
Page 4
vadZD Users GJIdE_FEVIsIun_EI_2014_07_25Indd 4 @ 7/25/14 112:: AM
I—IEEIQ—l
1. Wireless microphone antenna and A/ B microphone channel selector
(models VP3420 and VP3520 only)
2. Power light LED indicator
3. Master Volume control
4. Speaker MUTE switch with LED indicator
5. An ALC (automatic limiter control) switch
6. MIC 1 input volume control
7. MIC 2 input volume control
8. Line IN input volume control
9. MIC 1 input (combination XLR and 1/4” microphone jack)
10. MIC 2 input (1/8” microphone jack)
11. LINE IN input (1/8” stereo input from computer, CD player, etc., or
to receive signal from another Go Speak! Pro speaker.
12. LINE OUT (1/8” jack to send signal to a recorder or a second
GoSpeak! Pro speaker.
Page 5
vp3420 U Ser‘s GuideiFievIsloniB72014¥07725 indd 5 @ 7/25/14 11 .20 AM
—I:|:|@ 71—1
Connecting Your Corded Microphone
Your GoSpeak! Pro Speaker has four input/ output ports: MIC 1, MIC
2, LINE IN, LINE OUT.
1. Connect your corded microphone into either MIC 1 or MIC 2
inputs and turn the microphone oil:
MIC 1 (using with XLR or %” phone plug connector).
MIC 2 (using 1/ 8” phone plug connector).
2. Switch your Inicro phone to the “on” position.
3. Turn on your GoSpeak! Pro Speaker and adjust microphone input
VOluule. H
Note: LINE IN is for connecting music or other input sources
including additional GoSpeak! Pro speakers. "Hie LINE OUT port
is an output source for headphones, voice recorder or to send to
additional (joSpeak! Pro speakers.
page 6
Vp3420 User‘s GuideiFleVlSion7572014,07,25indd 6 @ 7/25/14 11:20 AM
x_l
Connecting Multiple GoSpeak! Pro’s
To coconnect multiple GoSpeak! Pro speakers, simply plug in a 1/8”
(35mm) audio cable. into the LIN E ()LI'I‘ jack on the first GoSpeakl
and the other end into the LINE IN jack on the second GoSpeakl Pro
as shown below:
Master GoSpcak!
IJNF 017T
Slave GoSpeak!
' 7 "/ LINE IN
Input and Speaker Volume Controls
Your (loSpeakl l’ro speaker comes wilh several controls to facilitale.
adjusting signal input from your microphone or from other music
sources. Additionally. the speaker has a MAS’l'l-IR Volume. control, a
speaker MUTE switch and an ALC (Auto Limiter Control) switch.
The Auto Limiter Control (ALC)
function helps eliminate distortion
caused by microphone
over—modulation
page 7
Vp3420 User‘s Guldejievisioniajm4707,25 indd 7 6) 7/25/14 11 20 AM
E4 om”: QEmNR my. a HEBNIBIWSmlmlcoESmmlmvfimu {$3 0N3?
w an.
.uEfi m E 25 awn—ya: van 2 GEES ,35 man. Em Edummow:
.mmfimmnfimm 2 ”Es—Pp ocean—Bud: anyhow
m5 :3: 3m Ewwmmow 26% do mEEo> H322 0% 3385 fiioa .o
.3585 0.5 Ewmmwow 2t 3 Emmi? 323835 m .8 4 as? LBSZKm
.mfioflmeafi
2t :0 :ofism 330m m5 mam: $23825 mmflmhg SP». :0 SE. +
:31.QO Em mfimmmou H99,“ :o 5.3. .m
fits 930$ ufl>£uofi$fl§ou
.33 2t =w 65:8 25:9? H832 #6?me En Edwmmow .thn 55H .m
.wcoflmobwfi
32:22”: SEW E. Gmwiuca mmtmfig << 95 2: SEE: A
”32mg 33m ME 2: 302$ “aconmohi:
2: me5 0H 5%QO Em memwoo 2:5. 4:3 ‘Emufiaoboflm
fiufiwm REE? fl 253L235 Eufiufifi $389? “fivmmow 30>
EOLQEBE
32%? 23933 So» mcsuwncou
@i
_| —:[:D©— |_
Microphone Controls and LED Status Indicator
Your GoSpeak' Pro Phndheld Microphom has three control button:
and anLED status mdx‘catow. Seedetmldcscn‘ptnns below
and”! MI Bum
UBS'Rd Bali-ti“ “ dew
m quan- DIM
g l. Pom! Mott (M! button). Q
Joggbpovmonmdorfi Map-mus muonmzupmmmx
wfllflashmdandhhefiotésmdsandmmhshmgnmmtm
msmcmmamomwmmsmmwb.
. mLEmdnuwmbt MWMWBOFF
2.01am! Sdtct Bwtton (right button)
.mmmmmswwmmmWMs
channelbemzenchmtelsAudB.
. Munchkin” 8 pwmm mmwmmmmm m6
smmmmmmfimmmArxlecwia
GREENdenchu-elbissehmd
Nonzmemndkbummmmpak Promdhddmmphammdudedh
funndevebpmtsoumw mm.
m9
mmnauo_mo-lmu.w1nu 9 @ mam "mu
Connecting Your Lapel Wireless Microphone
Your GoSpcak! wireless lapel microphone is already SMK-LINK
paired electronically with your GoSpeak! Pro speaker.
To enable the microphone, follow the six steps below:
1, Install the AA batteries (included) in your lapel microphone transmitter
box.
2. Turn your GoSpeak! Pro speaker Master Volume control all the way
counterclockwise (sound off).
3, Plug your lapel microphone into your transmitter box and turn the box
on,
4. Turn on your GoSpeak! Pro Speaker.
5.*Match the A or B microphone channel to the GoSpeak! Pro channel.
6. Slowly increase the Master Volume on your GoSpeak! Pro until the
correct microphone volume is established.
”GOSpeakl Pro can only connect to one Wireless mic at atime.
pug.» 10
Vp3420 User's GuideiFieVlsion7372014,07,25Jndd 10 @ 7/25/14 11 20 AM
l_E@—l
Warranty
SMKiLink Electronics Corporation (SMKiLink) warrants to the original endiuser
purchaser of the Product (‘you”) that the Product. excluding batteries, will be free
from defects in materials and workmanship under normal use and service for one-year
from date of purchase, If the product becomes defective in materials or workmanship
during the warranty period, SMKiLink will, at its option, either repair or replace it The
replacement unit may be a more current or upgraded model if the originally purchased
model is not available.
Any Product repaired or replaced under the terms of the warranty is covered for the
remainder of the original warranty period or ninety (90) days from the date of retum
shipment, whichever is longer This warranty does not cover products which have been
subjected to misuse, accident, physical damage, improper installation, abnormal operation
or handling, neglect. inundation or fire or when product regulator label has been removed,
altered or rendered illegible, nor does it cover accessory or consumable items.
SMKALink shall not be liable for any indirect special, incidental, or consequential
damages. SMKiLink’s total liability for damages for any cause related to, or arising out
of, the use or inability to use the product shall not exceed the original price paid for the
product even ifSMK-Link has been informed of such possibility.
Ifyour product requires service under warranty, you must first contact SMK-Link product
support to receive an RMA number. Shipping ofdefective units back to SMK-Link is at
your expense. The contact information can be found on the SMKiLink website: www,
smklinkcom.
This warranty does not affect your statutory rights and you may have other rights which
vary from state to state and country to country. This warranty is understood to be the
complete and exclusive agreement between the parties, superseding all prior agreements.
oral or written, and all other communications between the parties relating to the matter of
this warranty
The above warranty does not apply to products sold in Australia. Products sold in
Australia by an authorized reseller will contain an Australia specific warranty statement.
Page 11
vp3420User‘SGuideAFlevision_B,2014_07425indd 11 @ 7/25/14 11.20AM
1—:IZEIQ—l
Regulatory Compliance
FCC Certification
This device complies with Part 15 of the FCC Rules / Industry Canadalicence-exempt
RSS standard(s). Operation is subject to the following two conditions (1) this device may
not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation,
Le present appareil est oonforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence I’exploitation est autorisee aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage. et (2) l’utilisateur de I’appareil doit
accepter toutbrouillage radioélectrique subi, meme si le brouillage est susceptible d’en
compromettre 1e fonctionnement. Changes or modifications not expressly approved by the
party responsrble for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for aClass B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television recepu‘on, which can be determined by turning the equipment off and on. the
user is encouraged to try to correct the interference by one or more of the following:
. Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected Consult a dealer or experienced radio/TV technician for help.
Page 12
vp3420User‘S GuideAFievision_B,2014_07425 indd 12 @ 7/25/14 11.20 AM
l_:|:|:l@—l
MPE Requirements
To satisfy FCC / IC RF exposure requirements, aseparation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operationTo ensure compliance, operations at closer than this distance is not
recommended.
Les antennes installees doivent étre situe’es de facon a ce que la population ne puisse y
étre expose'e a une distance de moin de 20 cm. Installer les antennes de fawn a ce que Ie
personnel ne puisse approchera 20 cm ou moins de la position centrale de l’ antenne.
La FCC des e’ltatsiunis stipule que Get appareil doit étre en tout temps e’loigne' d’au moins
20 cm des personnes pendant son functionnement
Region Section
Limited by local law regulations, version for North America does not have region selection
option,
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna ofa type and maximum (or lesser) gain approved for the transmitter by Industry
Canada To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r. p.) is not
more than that necessary for successful communication.
Conformément a la re'glementation d’Industrie Canada. le present emetteur ladio
peutfonctionner avec une antenne d’un type et d’un gain maximal (ou inferieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de reduire les risques de brouillage
radioélectrique a l’intention des autres utilisateurs, il faut choisir le type d’antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne depasse pas
I’intensité néoessaire a I’e’tablissement d’une communication satisfaisante
Page 13
vp3420User‘S GuideAFievision_B,2014_07425indd 13 @ 7/25/14 11.20AM
_l_:l:l:l:|_l_
CE Declaration of Conformity
Manufacturer:
SMKV Link Electronics Corporation
360173 Calle Tecate
Camarillo, CA 93012
This equipment has been tested and found to comply with the limits ofthe European
Council Directive 1999/5/EC
A complete Declaration ofConformity can be found at www.miklink com
Page 14
vp3420U5er‘s GuideiFievlsoniBi2014707i25Indd 14 @ 725/14 11.2OAM
l—IEEIQ—l
Thank You
Thank you for your purchase of the GoSpeaki Pro Ulta Portable
PA System and for choosing SMKiLink Electronics to meet your
presentation needs. We look forward to serving you in the future.
To learn about new SMK-Link products as they become available,
and to ensure the best possible customer support, please register your
product online at www.5mklink.comlregister.
Support
SMK-Link Electronics Corporation
360143 Calle Tecate
Camarillo, CA 93012
TEL: (888) 69673500
FAX: (805) 98776665
Email: pcsupport@smkusa.com
www.smklin.k.com
©2014 SMKeLink Electronics Inc. SMKeLink, the SMKeLink logo and GoSpeakE are trademarks
or registered trademarks OfSMKiLink Electronics, Inc. All other trademarks are properties of
their respective owners Made in China.
Page 15
vp3420User‘S GuideiFlevisloniB72014¥07425 indd 15 @ 7/25/14 11.20 AM
Page 16
vp3420User‘s GuldeifievlsoniBi2O14707725Indd 16 @ 7/25/14 11 20AM
Page 17
vp3420User‘s GuldeifievlsoniBi2O14707725Indd 17 @ 7/25/14 11 20AM
Vp3420 User's Guidefieviswonfijm 4L ,25mdd 18 7/25/14 11:20 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 20 Producer : AFPL Ghostscript 8.54 Create Date : 2014:07:29 11:15:43 Modify Date : 2014:07:29 11:15:43 Title : User Manual Creator : FreePDF 4.00 - http://shbox.de Author : wakeyouwEXIF Metadata provided by EXIF.tools