Hanwha Techwin DIGIMAX210SE DIGITAL CAMERA User Manual
Samsung Techwin Co Ltd DIGITAL CAMERA
USER MANUAL
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 210 SE,
including taking pictures, downloading images and using Adobe Photo Deluxe software.
Please read this manual before using your new camera.
6 8 0 6 - 0 9 9 4
SAMSUNG TECHWIN CO.,LTD.
OPTO ELECTRONICS DIVISION
PLANT 1,
SAMSUNG TECHWIN CO.,LTD.
42, SUNGJU-DONG, CHANGWON-CITY,
KYUNGNAM, KOREA C.P.O BOX 9762
TEL : (82) 55-260-5941, 5945, 5951
FAX : (82) 55-260-5955~6
SAMSUNG OPTO-ELECTRONICS AMERICA,
I N C .
HEADQUARTERS
40 SEAVIEW DRIVES, SECAUCUS,
N J 0 7 0 9 4
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220
TEL : (1) 310-537-7000
FAX : (1) 310-537-1566
MIAMI OFFICE
2700 NW 87TH AVENUE, MIAMI, FL 33172
TEL : (1) 305-718-9377
FAX : (1) 305-718-9388
SAMSUNG U.K. LTD.
PHOTO PRODUCTS DIV.
SAMSUNG HOUSE, 3 RIVERBANK WAY,
GREAT WEST ROAD, BRENTFORD,
MIDDLESEX,TW8 9RE, U.K.
TEL : (44) 181-232-3278
FAX : (44) 181-569-8385
SAMSUNG DEUTSCHLAND GmbH
SAMSUNG HAUS
AM KRONBERGER HANG 6, 65824
SCHWALBACH, GERMANY
TEL : (49) 61-96-66 53 01
FAX : (49) 61-96-66 53 33
SAMSUNG FRANCE S.A.R.L.
BP. 51 TOUR MAINE-MONTPARNASSE 33,
AV DU MAINE 75755,
PARIS CEDEX 15, FRANCE
TEL : (33) 1-4279-2283
FAX : (33) 1-4320-4510
S.MARKET COM.IMP.EXP.LTDA
RUA ALFERES MAGALHÃES, 92 CONJUNTO 71
S A N T A N A
SÃO PAULO-SP BRAZIL 02034-000
TEL/FAX : (55) 11-6221-6833
SAMSUNG TECHWIN MOSCOW OFFICE
KOSMODAMIANSKAYA NABEREZNAYA
4 0 / 4 2 ,
MOSCOW, 113035, RUSSIA
T E L/FAX : (7) 095-937-79-50
SAMSUNG AUSTRALIA PTY. LTD.
LEVEL 33, NORTHPOINT BLDG, 100
MILLER STREET, NORTH SYDNEY,
NSW 2060, AUSTRALIA
TEL : (61) 2-9955-3888
FAX : (61) 2-9955-4233
TIANJIN SAMSUNG OPTO-ELECTRONICS
C O . , L T D .
7 PINGCHANG ROAD NANKAI DIST.
T I A N J I N
P.R CHINA
POST CODE:300190
TEL : (86)22-2761-4599
FAX : (86)22-2761-3314
¶NInternet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity mark of the
European Community (EC)
-Digimax210SE/«•¡ˆ 00.10.24 8:31 AM D‰¿Ã¡ˆ1
32
A SPECIAL FEAT U R E
CONTENS
¶U
This device was tested on the basis of the limits of a class B digital device,
in accordance with item 15 of FCC rules.This device adheres to the FCC
rules and regulations and is guaranteed against malfunction. However this
guarantee is void if installation and usage instructions are not followed.
This device can generate or release radio oscillation energy so if it is not
installed and used as directed, it may interfere with electrical equipment.
However we cannot guarantee the complete elimination of interference with
electrical equipment. During operation of this device, if any interference
occurs, please try one or more of the following measures.
°· Change the location and direction of any antenna.
°· Increase distance between camera and affected device.
°· Use a different socket from the affected device
°· Please contact a Samsung agent or a radio/TV engineer.
A warning FCC
A warning FCC
Thank you for buying a Samsung Camera.
This is a digital camera possessing the following features:
¢ÚA high resolution image of 2.1 megapixel
¢Ú3x optical zoom lens and 2x digital zoom lens
¢ÚMoving image function
¢ÚPC interface function
¢Ú1.8 inch TFT LCD monitor
ßôGetting to know your camera°¶°¶°¶°¶4
ßôNote for safety °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶5
ßôComposition of manufactures °¶°¶°¶°¶7
ßôPart names°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶8
Product exteriors °¶°¶°¶°¶°¶°¶°¶°¶°¶8
Viewfinder eyes window °¶°¶°¶°¶°¶°¶ 1 0
Photographing information indicator°¶1 1
Liquid monitor display mark °¶°¶°¶°¶ 1 2
ßôP r e p a r a t i o n °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 1 4
Connecting to power °¶°¶°¶°¶°¶°¶°¶ 1 4
Using the battery°¶°¶°¶°¶°¶°¶°¶°¶ 1 4
Checking the battery °¶°¶°¶°¶°¶°¶ 1 4
Using the AC power adapter°¶°¶°¶ 1 6
Attaching the strap°¶°¶°¶°¶°¶°¶°¶°¶ 1 7
Attaching the lenscap°¶°¶°¶°¶°¶°¶°¶ 1 7
Insert the compact flash memory card
°¶
1 8
Note for memory card °¶°¶°¶°¶°¶°¶ 1 9
Selecting the date and time°¶°¶°¶°¶ 2 1
ßôCamera working mode °¶°¶°¶°¶°¶°¶ 2 2
ßôA basic shooting °¶°¶°¶°¶°¶°¶°¶°¶°¶ 2 3
ßôShooting mode°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 2 6
Setting up shooting function using
photographing information indicator°¶2 6
Shooting function details using
photographing information indicator°¶2 9
Select to flash mode °¶°¶°¶°¶°¶°¶ 2 9
Select to quality mode °¶°¶°¶°¶°¶ 3 0
Select to Record Size°¶°¶°¶°¶°¶°¶ 3 0
Select to Selftimer °¶°¶°¶°¶°¶°¶°¶ 3 1
Other indicating items of photographing
information indicator °¶°¶°¶°¶°¶°¶°¶ 3 2
ßôDigital zoom °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 3 4
ßôSetting up shooting function using a
liquid monitor °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 3 5
Shooting up shooting function using
a liquid monitor °¶°¶°¶°¶°¶°¶°¶°¶°¶ 3 7
Detail item of function block°¶°¶°¶°¶ 4 0
P r o p e r t y°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶40
C a p t u r e °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶41
A d v a n c e°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶46
S y s t e m °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 4 8
ßôPlay mode°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 5 2
Starting play mode°¶°¶°¶°¶°¶°¶°¶°¶ 5 2
Setting up play function°¶°¶°¶°¶°¶°¶ 5 3
Play function items °¶°¶°¶°¶°¶°¶°¶°¶ 5 4
T h u m b n a l °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 5 5
Slide show °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 5 6
Lock/ unlock°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 5 7
Erase all image °¶°¶°¶°¶°¶°¶°¶°¶ 5 8
F o r m a t °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 6 0
Enlarging image °¶°¶°¶°¶°¶°¶°¶°¶ 6 1
Direct print ordering format °¶°¶°¶ 6 2
ßôComtacting the exteranl moniter °¶°¶ 6 3
ßôPC Connection mode °¶°¶°¶°¶°¶°¶°¶ 6 4
Starting PC connection mode °¶°¶°¶ 6 4
Setting PC connection mode°¶°¶°¶°¶ 6 5
Setting PC connection mode item °¶6 6
ßôNote in using °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 6 7
ßôBefore asking service °¶°¶°¶°¶°¶°¶°¶ 6 9
ßô
Digimax 210SE camera specification
°¶7 1
ßôSoftware manual °¶°¶°¶°¶°¶°¶°¶°¶°¶ 7 2
Class B
p r o d u c t
This product can be used in all areas, including residential areas. It
has been registered as having suitable electromagnetic waves for
general household use.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ2
54
BEFORE YOU STA R T USING YOUR SAMSUNG CAMERA
°‹
Prior to using this camera, please read the instruction manual thoroughly.
°‹
Keep the manual in a safe and secure place
.
This manual contains instructions on using this camera that will help you to use
this camera safely and correctly. This will help to safeguard against danger and
injury to others.
About the image mark
Warning
This is a descriptive statement warning of the result if the instructions
are ignored or not understood.
Note
This explains use of the camera, please refer to this.
Reference
This should assist further in the operation of the camera.
NOTE IN SAFETY
Wa r n i n g
°·Do not attempt to modify this camera in any way. This may cause a fire or electric shock or
severe damage to the camera. Internal inspection, maintenance and repairs should be
carried out by your dealer or Samsung Camera Service CenterThen contact your dealer or
Samsung Camera Service Center
°·Do not use the flash in close proximity to the subject or person. Eyesight could be damaged
if the flash is used close to your subjects eyes. Do not take pictures of children with the flash
with in 1 metre.
°·Never keep the camera face to strong light directly. It can cause a damage to eyes that
doesn’t recover.
°·Please do not use this product in close proximity to flammable or explosive gases,this could
increase the risk of explsion.
°·Please keep this preduct away from children or animals or the following accidents may
o c c u r .
¶UChoking on the camera strap swsllowing of the batteries or the small camera accessories.
¶UPlease consult a doctor of any of these incidents occur.
¶UThey fire flash in front of their eyes and then a damage that recovering eyesight can be
o c c u r r e d .
¶UThey can be harmed by a camera’s moving part.
°·Do not use the camera if any water has entered the camera. Switch the camera off, and then
disconnect the power source(batteries or AC Power Adapter). (If your are using the AC
Power Adapter, unplug the adapter from the AC Power wall socket after you have
disconnected the camera.)Then contact your dealer or Samsung Camera Service Center.
Do not continue to use the camera as this may cause a fire or electric shock.
°·Do not use the camera if any foreign objects have entered the camera. Turn the camera off,
any then disconnect the power source (batteries or AC power Adapter) (If you are using the
AC power adapter, unplug the adapter from the AC Power wall socket after you have
disconnected the camera) Then contact your dealer or Samsung Camera Service Center.
Do not continue to use the camera as this may case a fire or electric shock.
°·Do not insert or drop metallic or inflammable foreign objects into the camera through access
points such as the CompactFlash card slot. This may cause a fire or electric shock.
°·Do not operate this camera with moist or very sweaty hands this will pose a risk of electric
s h o c k .
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ4
6 7
CONTENTS
°·
Please check you have the correct contents before using this product.
Contents
Accessories (not supplied)
AC Adapter
Digital camera Compact flash 4 AA Alkaline
Digimax 210SE
memory card (8MB) Batteries Camera Case
Application S/W°§Driver CD-ROM
User manual Product warranty
Video cable RS-232C cable
Adapter(Mac only)
USB cable
Lens cap
Lens cap retaining cord
Camera strap
NOTE IN SAFETY
Wa r n i n g
°·Do not leave this camera in places subject to extremely high temperatures, such as in a sealed
vehicle or in direct sunlight. Exposure to high temperatures may adversely affect the camera case
and internal components and cause a fire.
°·Do not cover or wrap the camera or the AC Power Adapter with a cloth or quilt. This may cause
heat to build up and distort the case or cause a fire. Always use the camera and its accessories in
a well-ventilated area.
°·Leaking of liquid, overgeating, outbreak of fire, bursting of battery can cause fire and injury.
¶UDo not use batteries other than those specified for use with your camera.
¶UDo not short circuit, heat or dispose of the batteries in heat or fire.
¶UDo not use old batteries with new ones, or mix brands of batteries.
¶UEnsure the batteries are positioned correctly with regard to polarity.
°·When the camera is not use for long periods, such as during a vacation, always unplug the camera
from the power source(batteries or AC Power Adapter) for safety. Leaking batteries can cause fire
and pollution of the environment.
°·Do not radiate on the state that you close luminous part of flash. And be careful not to contact your
hand to luminous part after continuous radiation. There is a danger you get burnt in hand.
°·Contact your dealer or Samsung Camera Service Center to request interior cleaning every two
years. Allowing dust to accumulate in the camera for long periods may cause a fire or electric
shock. It is best to clean prior to seasonal periods of high humidity. Consult your dealer or
Samsung Camera Service Center for information on the cost of cleaning your camera.
°·Do not move the camera while it is switched on.(If you are using the AC Power Adapter, unplug the
adapter from the AC Power wall socket after you have switched off the camera).
°·Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera, Failure to do so may damage the cords or cables and cause a fire or electric
s h o c k .
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ6
98
PA RT NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. PA R T NAMES FOR THE EXTERIOR OF THE DIGIMAX 210.
F r o n t / R e a r S i d e / b o t t o m
Self timer lamp
Flash
Shutter button
Mode dial
Power button
LCD on/off button / button
Menu button
Zoom button W (WIDE)
Zoom button T (TELE)
Autofocus indicator(Green LED)
Viewfinder
Status / button Direction buttons: Down
Direction buttons: Left
Direction buttons: Up
Direction buttons: Right
LCD monitor
Flash indicator
(Red LED)
Select button
Camera Status LCD
Viewfinder
Scroll button
Flash fading control sensor
Digital connection terminal (RS232C output terminal)
USB connection terminal
Video connection terminal (Video output terminal)
Strap Attachment point.
Compact Flash card cover.
Memory card slot
AC Adaptor connection point
Card removal button
Tripod socket
Battery chamber cover
Lens
External interface cover
D P O F
E R A S E
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ8
1 11 0
PA RT NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. PA R T NAMES FOR THE EXTERIOR OF THE DIGIMAX 210.
Viewfinder Photographing information indicator
Reference
°§
Vertical and Horizontal shots are taken in the same way.
Note
°§
Please use the LCD monitor when using Macro photography
(within 0.8m)
Close range picture (area mark)
Optimum picture area within 0.8~1.5m
Picture area frame
Optimum picture area over 1.5m
Autofocus frame
Flash mode indicator
:
Auto flash
:
Highest
picture quality
:
High
picture quality
:
Standard
picture quality
:
1600x1200 pixel
:
800x600 pixel
:
Setting up the Selftimer
:
Picturing available remaining number
:
Preparation power on
: Exposure
compensation status
: Memory card warning (installation)
: Memory card warning (low capacity)
: Getting ready for the operation of the
camera Saving the image of TIFF file
form in the memorycard.
:
Play mode
:
PC connection mode
:
Fill-in Flash
:
Flash off
:
Macro photography
: Battery status
: Preparing a new
battery
: Battery low
Replace new batteries.
:
Auto flash and
Red-eye reduction
Picture quality
symbol Recording size mark
Selftimer mode indicator
Exposure symbol
Macro photography
indicator
Battery Check
Indicator for the number of the remaining shot,
condition of the card and other information
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ10
1 31 2
PA RT NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. PA R T NAMES FOR THE EXTERIOR OF THE DIGIMAX 210.
°·
Monitor symbol for (Macro /Normal )
LCD monitor symbol
°·
Play mode symbol
Thumbnail
Slide show
Lock/ unlock
Erase all
Format
Select (ENTER)
¶_
Press (ENTER) button
°[Display of the beginning frame°\
Press the MENU button on play mode.
°[Display of the beginning frame°\
Press the MENU button on shot mode.
°[STATUS Confirmation°\
Digital zoom Press the STATUS button on shot mode. °[Display of the beginning frame°\
Order of storing files on the memory card.
¶_
When you select the play mode,
the last image is displayed.
L o c k
¶_It is displayed when you
select Lock.
Shooting image
Picturing available remaining number
Date and Time
Status indicating block
White balance
¶U
Auto
( )
¶U
Daylight
( )
¶U
Fluorescent light
( )
¶U
Tungsten lamp
( )
Flash
¶U
Auto
( )
¶U
Auto and Red-eye reduction
( )
¶U
Fill-in Flash
( )
¶U
Flash off
( )
Shooting mode
¶U
Macro
( )
¶U
Normal
(No Symbol)
Digital zoom
Formatting Capture
¶U
One normal shot
is taken.
( )
¶U
Continuous shooting
( )
¶U
Interval shooting
( )
¶UMoving image( )
Quality and Resolution
¶U:
Highest picture quality
( )
:
High picture quality
( )
:
Standard picture quality
( )
¶ULARGE( L )
S M A L L ( S )
Formatting Capture
¶UMoving image ( )
Function block
Function detail items
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ12
1 51 4
PREPARATION PREPARATION
There are two ways in which to provide the camera with power.
One is using batteries (AA Alkaline) alternativley use an AC Adaptor
(DC 6V / 1.5A)
Connecting to Power
¶U
You can check the battery life on the LCD panel.
: Battery status
: Preparing a new battery
: Battery low-Replace new batteries.
°·
Checking the battery
Open the battery cover by pushing in the
direction of the arrow.
1
Insert the battery taking note of the
polarity (+,-)
2
°·
Using batteries
To close the battery cover, push it until it
clicks
3
Reference
°§
After the low battery symbol appears, the camera will continue to work
for approx 10 minutes.
°§
This camera will automatically switch off when not in use for a period
of time. For more information regarding auto power off, please refer to
the power off section on page 49.
NOTE
¢Ú
Important Information about battery usage.
°§
Please remove the batteries if the camera will not be used for a long
periods. Batteries can lose power over time and are prone to leak if
kept inside the camera.
°§
Do not use manganese batteries as they cannot deliver sufficient
power.
°§
Low temperatures (below O°…) can cause the camera to work for a
shorter period of time due to reduced battery performance. However
the batteries will recover at normal temperatures.
°§
Do not use old and new batteries or different types together.
°§
Extended use of the camera may cause the camera body to warm up.
This is perfectly normal.
°§
If you are planning to use this camera for long periods of time it is
advisable to use an AC adaptor.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ14
1 71 6
PREPARATION PREPARATION
°·
Battery life
¶U
This camera will generally to provide over 100 images using one set of
batteries under normal conditions. To prevent accidental damage to the camera always use the strap.
°·
Refer to the illustrations above
Attaching the strap
°·
When using the AC adaptor.
¶U
If you have access to a mains supply , using an AC Adaptor allows the
camera to be used for long periods of time.
Reference
We recommends a battery like below.
°§Duracell ULTRA ALKALINE battery of Duracell Company
°§Maxi-Tech ALKALINE battery of Varta Company
°§ALKALINE battery of Panasonic Company
Warning
°§
Always turn the power off before taking the AC adaptor out of the
mains supply.
°§
Treat the AC adaptor with the same care and attention that you would
with any mains device.
1 2
Use the retaining cord to prevent loss of the lens cap.
°·
Refer to the illustrations above
°ÿ
After using, keep the lenscap in connection with a strap.
Attaching the lens cap
1 2 3
¶U
Plug in the adaptor to the connection point on the
camera. Please make sure that you use the AC
adaptor with the correct specification.Failure to do
so may affect your warranty.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ16
1 91 8
PREPARATION PREPARATION
Inserting the compact flash memory card
Push cover towards the arrow to open the card
cover.
1
Instructions on how to use a new memory card.
Inset the card.
2
To close, push towards the arrow until you hear a
click.
3
Removing compact flash memory card
Turn off the power using the power button (®Á).
1
Push the card removal button (®Ë)down.
2
Remove the card as shown in the picture below.
3
Reference
°§
Using an 8MB compact flash memory card, the specification/
shooting capacity will be as follows (This is based on the
conditioning standard of our company.)
°ÿ
The number of the normal shots can be varied according to the
type of the compact flash memorycard.
Recording size
Recording picture quality
File format
Amount of shots
.T I F 1
L .J P G 8°æ1
( 1 6 0 0°ø1200 Pixel) .J P G 1 5 °æ1
.J P G 3 0 °æ1
.T I F 5
S .J P G 3 0 °æ1
( 8 0 0 °ø600 Pixel) .J P G 5 9 °æ1
.J P G 1 1 4 °æ1
°·
Before using, the card must be initialised.
°§
Intialising prepares the card for recording data.
°ÿ
For more details, please refer to the user manual,page 60.
°·
Preserving the memory card data
°§
The recorded data could be corrupted under the following conditions
- When the card is used incorrectly
- If the power is switched on whilst initialising, reading or removing the
memory card.
°§
Advice: Copy important data into other media (floppy disk, hard disk etc.)
- Samsung cannot be held responsible for lost data. Please copy important
files as soon as it is practical.
Note
°§If you use it for a long time, you can°Øt record a new image data. In this case, buy a new
c a r d .
°§
Always turn off the power when replacing the memory card.
®Á
Highest picture
quality
Highest picture
quality
Highest picture
quality
High picture quality
High picture quality
Standard picture quality
Standard picture quality
®Ë
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ18
2 12 0
PREPARATION PREPARATION
Note
Important information in using memorycard.
°§
If you switch off this camera whilst it is reading initialising or playing,
the information on the memory card may be corrupted.
°§
Do not bend, drop or expose the card to any heavy impact.
°§
Do not store the memory card in an environment with strong electronic
or magnetic fields, e.g. near loud speakers or TV receivers.
°§
Please do not use or store in an environment where there are
extremes of temperature.
°§
DO NOT allow the camera to get into contact with sand, water or
other contaminants. Damage caused in this way will INVALIDATE
THE WARRANTY and may damage the camera beyond economic
repair.
°§
Please keep the card in its case when not in use.
°§
Through periods of long use you may find that the card is warm,
this is normal.
Selecting the date and time
°·
You can record the date and time with the image data in the memorycard when
you take a picture.
Please select the date and time when you use the camera for the first time.
Turn the power on by pressing the power button.
1
Set the mode dial to the shot mode.
(macro /normal )
2
Press the MENU button
When the liquid crystal monitor is automatically
turned on, the setup MENU frame is displayed.
3
Move to the function block [system] by using the RIGHT button(
¢Ú
) among
the four direction button.
4
Move to the detail function list [date/time] by
using the DOWN button(
°Â
) among the four
direction buttons and press the Enter button
and then the next frame is displayed.
5
Select the right Date and Time by using the
four direction buttons on the next ‘selecting
date and time’ frame and press the Enter
button and then you go back to the setup
MENU frame and the date/time is displayed
as is updated.
6
In this, the MENU mode is cancelled if you press the MENU button and the
setup is completed.
7
Reference
°§The range of selecting the date/time setup : 2000~2050 (It is automatically corrected in
case of the leap year/month)
°§It is originally set as [2000/01/01 00:00]
°§If you left the camera without the battery for over one hour, check the date/time again.
°[4 directional button°\
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ20
2 3
TAKING PHOTOS
Now let’s take a picture.
To switch on press the power button(
®Á
)
°§The indicator ( ) on the shot information indicator and the condition indicator
lamp(green) next to the viewfinde blink while the camera is getting ready for the
operation, and they go out when the camera is ready for shots.
1
Select the desired mode (Macro or Normal) according to picturing range
by using the mode dial(®Ë) on the top of a camera.
°§
Macro( ) : between 20cm~80cm
°§
Normal( ) : photography range 80cm~ infinite
2
Select the suitable the image quality and the record size with the scroll
b u t t o n (
®È
), the select button(
®Í
) and LCD monitor off
°§Refer to the page 26~33 about the shot mode using the shot information indicator.
3
®Á
®Ë ®È®Í
2 2
CAMERA WORKING MODE
Camera working mode
°·
You can select the appropriate working mode by using the mode dial located
at the top of the camera. This digital camera has 4 working modes these are
listed below.
¢Ú
Macro photography
( )
This mode is used for close range
photography between 20cm ~ 80cm.
The flash( )is set up to operate
automatically but you can set the flash mode
to your own preference.
¢Ú
Normal pictures
( )
This mode is used for normal pictures from 80cm ~infinity.
In this mode, the camera uses auto exposure, auto white balance, auto focus
and the images are stored on the memory card.
¢Ú
Play mode
( / )
In this mode, the stored images on the memory card can be viewed on the
LCD monitor on the back of the camera or on an external monitor using a
video output terminal
You can choose image play, 9 division image play, slide show image
protection, image delete or memory card formatting.
¢Ú
PC connection mode
( / )
You can download images stored on the memory card directly to your PC.
°[
Mode dial indicator
°\
Note
°§You cannot get the clear image of the object if you don°Øt select the suitable shot
mode(normal shot or macro shot)according to the distance between the object and the
c a m e r a .
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ22
2 5
TAKING PHOTOS
Note
¢Ú
Under certain conditions the auto focus system may not perform as
expected.
°§
When photographing an object that has little contrast.
°§
If the subject is highly reflective or shiny.
°§
If the subject is moving at high speed.
°§
When there is an object that has only horizontal lines or a thin object
within the autofocus range.
°§If taking near and far objects at the same time within autofocus mark range.
°§When there is strong reflected light, or when the background is very bright .
¢Ú
You cannot take the macro shooting in places darker than
0.3 Lux because automatic focus control does not work.
¢Ú
Warning of hand shaking
°§
Push the shutter button about a half in flash off mode and if a red
lamp flickers fast, it is a warming about hand shaking. In this case,
use a tripod or change the mode into flash shooting mode.
¢Ú
Backlight compensated shot
Since the image can be shown dark if you take it facing the sun,
please use the exposure compensation(refer to page 47) or press
the ENTER/( ) button after the LCD monitor is on and then the
indicator is on. When you shot under this condition, the exposure is
corrected because the center waited metering of the object is shot
with the side light.
Reference
¢Ú
LED status mark is beside the viewfinder.
°§
Half press the shutter button, if the camera
is in focus the green LED will light up.
°§
The red LED indicates the flash mode.
°§
The red LED light flashes it means that the flash is charging.
°§
When an image has been stored onto the memory card, the green
lamp flashes slowly. When the image data has been stored the green
LED light will go out. After the green LED light has gone out you can
re-commence taking pictures.
2 4
TAKING PHOTOS
Set up the picture function by using the status LCD and the menu screen on
the picture LCD monitor. Refer to the page 35~51 about the selecting the
shot function using the MENU frame on LCD panel.
4
Decide the picture composition that you want to achieve by using the
optical viewfinder or the LCD monitor. In macro photography mode, you
should compose your picture composition using the LCD monitor.
5
When taking pictures squeeze the shutter button gently to avoid camera
shake.
°§
Press the shutter button down halfway the autofocus will be activated and
the status of the flash will show.
°§
If you press the shutter button down fully, the picture will be taken and the
data regarding the picture will be stored
.
6
Reference
¢Ú
If there is insufficient memory available the camera status LCD
will flash as zero.
°§Reducing the file size may allow some more shots to be taken ( ).
°§
If you press halfway the shutter button for the shot when LCD panel
is on, the following message is displayed.
¢—
If you want to use the LCD monitor, simply press the LCD button
.
¢—
If the beep is on, the card capacity short warning sounds
(beep-beep-)
¢—
Restricting the use of the LCD monitor will preserve the battery life.
To optimise the amount of memory on the camera, replace the
memory card or delete unnecessary images stored on the camera.
CARD IS FULL!
I N S E R T
NEW CARD
Note
°§
Extensive use of the LCD monitor to view the potential picture will
drain the batteries in a short period of time. To safeguard against this
please use the manual viewfinder.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ24
2 7
SETTING UP THE SHOOTING FUNCTION
°·
Indication of set mode ex ( setting flash mode)
If a normal indicating status changes into set mode, the present function
symbol of a selected function block flickers (the present set autoflash
symbol flickers as shown)
1
Whenever you push the SELECT button, a detailed function symbol of the
selected function block flickers
2
If you change the function block by using the SCROLL button, the previous
function block will not flicker and the present set detail function block flickers
3
pushing scroll button
°[
Normal indicating status
°\ °[
set mode status
°\
pushing select button
°[
autoflash set status
°\ °[
selecting autoflash and
red eye reduction
°\
pushing scroll button
°[
selecting autoflash and
red eye reduction
°\ °[
high quality set status
°\
2 6
SETTING UP THE SHOOTING FUNCTION
Setting up the shooting function by using the photogra p h i n g
i n fo rmation indicator.
°·
Using the photo information indicator set mode, you can set the following:
(flash/ image quality/ recording size/ self timer function setting )
°§
The SCROLL button allows you to select certain features which will flash
when avalable for selection.
°§
Using the select button allows you to set that particular function as you wish.
(The selected detail function indicator blinks.)
°ÿ
SELECT button doesn’t work in the normal indicating status.
Normal indicating status
Flash
SCROLL button SCROLL button
SCROLL button
SELECT button
SELECT button
SELECT button
SELECT button
SELECT button SELECT button
SELECT button
SELECT button
SELECT button
SELECT button
SELECT button
SCROLL button SCROLL button
Image quality
Recording size
Self timer
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ26
2 8
SETTING UP THE SHOOTING FUNCTION
2 9
SETTING UP THE SHOOTING FUNCTION
Shooting Function details using photographing info rmation indicator
°§
Four different flash modes can be selected using the SELECT button. The
mode will be shown in the camera status LCD.
°§
Use the correct flash to suit the environment.
°§
Flash mode indicator
:
The flash is disabled
:
If the background behind the object is very
bright, fill in flash will safeguard against that
object appearing too dark in the photo. The
result should be an acceptable lighting balance.
:
If the object that is being photographed is too
dark, the camera flash will work automatically.
: The flash will work automatically if there is not enough light.
The problem of red eye will also be reduced.
Selecting the Flash mode
Reference
°§
Using the flash frequently will reduce the life of the batteries.
°§
Under normal operating conditions the charging time for the flash is
normally within 7 seconds. If the batteries are weak the charging
time will be longer.
Note
°§Please photograph within the flask shot range(W: 0.2~3m. T:0.2~2m).
The image is saturated when you take it with a strong reflector or at
close range.
Auto Flash
Fill-in Flash
Flash off
Auto Flash and
red-eye reduction
If you want to cancel the setup mode, press the scroll button until it changes
into the normal indication condition. Also it can be cancelled in the situations
bellow.
4
Reference
¢Ú
Cancel of photograph information indicator set mode Set mode is
cancelled automatically when following these instructions.
- When you press the zoom button(wide or tele)
- When you press the shutter button or menu button.
- When you operate the mode dial.
- If the power goes off.
¢Ú
You can select the setup shot function with the shot information
indicator also on LCD panel using the setup MENU mode.
¢Ú
You cannot select the shot function using the Scroll button and the
Select button while you set up the shot information on LCD panel.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ28
3 13 0
SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION
°§
Using the SELECT button in the image quality mode, allows three types of
image quality to be selected.(The selected image quality will flash).
°§
The capacity of memory is determined by the quality of image that is
selected. You can obtain three types of image quality;
°§
Select the appropriate image quality from the previous 3 modes.
Selecting image quality mode
°§
This function is used when the photographer also wants to be in the picture.
°§
Whenever you press the SELECT button on the selftimer mode set status,
the symbol flashes on the photographing information indicator.
°§If you select , the indicator ( ) is displayed under the normal indication
condition.
°§It is taken after 10 seconds when you press the shutter button and after that,
the self-timer is cancelled.
Selecting the Selftimer mode.
°§
You can choose the file size (large or small) by using the select button to set
(L) or (S).
°§
If the recording size is too large, the capacity for remaining pictures will
decrease.
L: 1600°ø1200
pixel
S: 800°ø600
pixel
Select to Record size
Reference
°§
The picture image file is normally stored in *.jpg but selecting the
highest image quality enables *tif files to be used. Refer to page 40
for details of selecting the pictured image file form
.
°§
You can get the best quality shot with *.TIF file which is for the
professionals. However, The number of the shot is decreased and the
time it is saved in the memorycard is lengthened.
Reference
°§
The image quality and recording size determines the number of
images that can be shot. The recording size stored in the memory
can not be changed once an image is captured, the size of the stored
file cannot be altered.
Reference
°§
The selftimer LED indicator (red) will flash whilst the selftimer is
shooting.
- 7 seconds after pressing the shutter button the LED will flash
slowly in 1 second intervals.
- In the last 3 seconds the LED light will flash in
1/2
second intervals.
°§
If the sound function is in operation the camera will beep in 1 second
intervals to warn you when the picture will be taken.
°[
Highest Image quality
°\°[
High Image quality
°\°[ Standard Image quality°\
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ30
3 33 2
SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION
Other indicating items of photographing information indicator
°§
If you select macro photography mode, a symbol( )will appear on the
photograph information indicator.
°§
If you select the normal shooting mode, the symbol( ) will disappear.
Macro picture indicator °§According to the condition of the camera and memorycard, it is shown on
shot information indicator as below.
°·camera condition indicator
The Indicator ( ) on shot information indicator blinks if you press the
power button.
¶_
The indicator ( ) is cancelled when the camera is ready for the operation.
°·
When the memory card is set up properly
The number of pictures available to take is determined by the image quality
selected and recording size.
¶_
The maximum pictures available will be 9999(subject to memory size and
picture quality)
°·
When the memory card is not set up properly
( ) symbol flashes on the location of picturing available indicator.
¶_
If there is no card a beep will sound.
°·
When a memory card is set and there is short capacity
symbol ( ) will flash on the location of pictures available indicator.
¶_
If the sound function is on, the card memory capacity short warning
sound will.
°·
When you are saving the tiff file form image in the memorycard
The indicator blinks on the [indicator for the number of the remaining
shot].
¶_
When the saving to the memorycard is completed, The indicator is
cancelled.
°·
Indicator for the camera error
When the error occurs while the operation of the camera, The indicator
on the shot information indicator blinks.
¶_
Refer to the page 68 about the detail information about the occurrence of
the error.
Indicator for the number of the remaining shot, condition of the card and other information.
°§
If you select exposure compensation in manual set mode on the LCD
monitor, a symbol will appear on the camera status LCD.
¶_
Refer to the user manual [exposure compensation status] page 47 about
exposure compensation status.
°§
If you select exposure compensation 0, the symbol will disappear.
Exposure compensation status mark
°§The battery status symbol of the photograph information indicator is shown below.
Checking the battery
Reference
°§When the memory capacity is low it will not be possible to take a picture.
°§
A warning will sound regarding low memory or no card will sound in
the following events.
- When you have pressed the shutter button.
- When you have used mode dial.
: Battery status
: Preparing a new battery
: Battery low-Replace new batteries.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ32
3 53 4
SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION
Setting up the picturing function by using the LCD monitor
°·
If you press the MENU button on the state of power on the entrance screen
the menu status will be displayed on the LCD monitor.
°§
The function block name is displayed on the top of the LCD monitor.
¶_
The indicator (
¢Ú
) means there is another function block
°§
The function block name is displayed on the top of the LCD monitor.
The status of the camera can be determined by the bar cursor area.
¶_
In the above picture, the present function is set in a standard image
quality / JPEG file form / SMALL pixel.
°·
The menu set mode indicator of the (macro / normal) mode status.
Reference
In the following cases, the menu set mode is not available.
- When another button is pressed.
- Whilst image data is being processed. (when the green LED
beside viewfinder flashes)
- When there is no battery.
Reference
¢Ú
Digital zoom.
°§
Because this camera can support 2x digital zoom, if you use it with 3x
optical zoom, it is possible to take picture of 6x zoom almost.
°§
Digital zoom is only possible when a liquid monitor is put on.
°§
If you push zoom button T (TELE) in the state that 3x optical zoom is
set up, digital zoom setting is possibe.
°§
Digital zoom is devied into 5 grades like (DX 1.5,DX 2.0 )and this
grade is displayed on the left top of a liquid monitor according to zoom
magnification.
1. Working DIGITAL TELE
-If you push zoom button T, software tele zooming is processed.
-If you finish pushing zoom button T, software tele zooming is ended.
-If digital zoom is achieved to 2x zoom, digital zooming will be
finished without operation of zoom button T.
2.Working DIGITAL wide
-If you push zoom button W, software wide zooming is processed.
-If you finish pushing zoom button w, software wide zooming is
ended.
-If you continually push the wide button on the state of dizital zoom
cancel, 3x optical zoom is also canceled.
°ÿ
If you take pictures on the digital zoom mode, please wait until the
saving is completed because it takes some time to save the taken
image in the memorycard.
°ÿ
It is impossible to use the digital zoom shot in continuous shot,
interval shot and moving images shot, and it is cancelled.
If you press the menu button, the menu screen will appear.
1
Function block
Function detail items
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ34
3 7
SETTING UP THE SHOOTING FUNCTION
The following options are available on the LCD monitor by pressing the menu button.
°·Manual set mode composition of (macro/normal) shooting mode
Fuction bl o c k
Fuction detail items
Q L T Y
P R O P E R T Y F I L E
S I Z E
T Y P E
C A P T U R E F L A S H
S E L F
W . B
A D V A N C E E . V
D . Z O O M
B E E P
PWR OFF
S Y S T E M LCD BRT
D A T E / T I M E
V I D E O
3 6
SETTING UP THE SHOOTING FUNCTION
The menu set mode is divided into 4 function blocks.
Select the function block by using the left directional button.
2
After selecting a function block, move the bar cursor into the function detail
item that you want by using the up or down directional buttons.
3
When you press the directional buttons the bar cursor will move accordingly.
¶_
The present status changes into the bar cursor marked function.
4
Change into the set status that you want repeating steps 2.3. and 4
5
If you want to finish a set mode, press the MENU button again.
¶_
The menu screen will disappear and the camera image will be displayed
on the LCD monitor.
However, the moving images is displayed on LCD panel only when you
press the LCD button on the normal shot mode.
6
Reference : The operation of the directional buttons
- The UP (°„) directional button ¢— moves the bar cursor up
-
The DOWN
(°Â)
directional button ¢— moves the bar cursor down.
- The LEFT(¢ ’)directional button ¢— moves the bar cursor left.
-
The RIGHT
(¢ Ú)
directional button ¢— moves the bar cursor right.
¢ÚPress the button
¢ÚPress the button
¢ÚPress the button
¢ÚPress the button
¢ÚPress the button
¢ÚPress the button
Bar cursor
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ36
3 93 8
SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION
P R O P E R T Y
°·QLTY :
Select a compression rate
°·FILE :
Select a format
°·SIZE :
Select a resolution
1
SYSTEM :
Sets the camera to your requirements.
°·B E E P :
You can select whether to have the beep on or off.
°·PWR OFF (
power off
) :
The camera will automatically turn itself off if it is
not used for a set period of time.
°·LCD BRT (
LCD bright
) :
Here you can control the brightness of the LCD
monitor
°·D A T E / T I M E :
This function sets the date and time of the camera.
°·V I D E O :
you can choose from either ( NTSC or PAL ) video output
4
C A P T U R E
°·T Y P E
°§
One nomal shot is taken
.
°§
Continous shooting
:
Allows you to continuously shoot individual pictures
of amoving object.
°§
Interval shooting
:
This mode takes pictures at set timed intervals.
°§
Moving image shooting : it is saves as the moving images.
°·F L A S H
°§
There are 4 flash modes: auto/ auto and red-eye reduction / fill-in flash /
flash off. Select the most appropriate flash mode for the picture.
°·S E L F
°§
Select self timer function.
2
A D V A N C E
This is for more adventurous photographers who want to use advanced
application modes.
°·W . B (
white balance
)
°§
Different lighting conditions will affect the way the colour appears on
theimage. This control helps to achieve a more natural colour.
°·E . V
°§
Users can control exposure manually.
°·D . Z O O M
°§
You can set up or cancel the digital zoom function.
3
Reference
°§
All set functions will be kept when the camera is switched off and on
again.
Pre-set automatic setting are as follows
Note
°§
Then press the MENU button to confirm your choice.
T Y P E
One image ( )shooting mode.
C A P T U R E F L A S H Macro( )
Flash off
( )mode
Nomal( )
Auto flash( )mode.
S E L F
mode.
A D V A N C E W . B
mode
E . V
status
Function
block Function detail items
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ38
4 1
SETTING UP THE SHOOTING FUNCTION
Change the set status on the CAPTURE menu screen by using the 4
directional buttons.
C A P T U R E
°·
There are 4 kinds of CAPTURE modes.
¢Ú
One nomal shot is taken
°§
Press the shutter button to take a shot
4 0
SETTING UP THE SHOOTING FUNCTION
Change the set status on the PROPERTY menu screen by using the 4
directional buttons.
°·
By selecting QLTY you can change the compression rate of the picture.
°·
The file format observes DCF (The Design rule of Camera File format)
°§
If you select ( ) or ( ) image quality, the file format will default to *.jpg.
°§If you select ( ) image quality, you can choose between a*.jpg or *.tif file format.
¶_
The *.jpg file form shot is recommended in general cases.
¶_
You can get the best image quality shot with *.TIF file which is for the
professionals. However, The number of the shot is decreased and the time
for the saving is lengthened.
¶_
When saving an image in *.tif format, the icon will appear on the
LCD on the top panel.
°·
Large is equivalent to a resolution of 1600 x 1200 pixels
Small is equivalent to a resolution of 800 x 600 pixels
P R O P E R T Y
Image quality is good in this order.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ40
4 3
¢Ú
Interval shooting
°§
Setting interval shooting allows you to take pictures of moving objects over a
period of time, such as flowers or a sunset.
°§
The power will automatically switch off after interval shooting is complete.
¶_
The interval time and the amount of shots to
be taken will be displayed on the
“Capture” screen.
After pressing the Enter button you will be able to scroll through the time
and shooting options using the 4 directional buttons. By pressing the Enter
button again the “Capture” screen will return with the updated information.
If you press the MENU button at this, the setup MENU frame is cancelled
and the camera is ready for the interval shot.
1
The minimum interval shooting time is 30 seconds and the possible interval
shooting number is from 2 to 99.
2
The self timer light will flash rapidly in the last 5 seconds of interval shooting.
4
When the camera is getting ready for the interval shot, LCD panel goes off
and the letter INT blinks on the shot information indicator.
3
¿ŒªÕp˙÷‘øµµø¿¤ W÷¿¤5 ÷ ¿¸ÚŒªÕºø«¡ ª’ ¿Ã’”•«¡ •°Ú¸’£•‘±Ù Ú˝¿‘¥œ¥Ÿ.
4
The interval time(30 seconds) and the number
of the interval shot are displayed.
4 2
SETTING UP THE SHOOTING FUNCTION
¢Ú
Continuous shooting
°§
You can take a number of pictures of moving objects.
°§
When the continuous shot is completed, it is automatically set up as one shot
take mode.
¶_
If the Enter button is pressed after selecting
continuous shooting, the LCD screen will
display the “Burst Set” menu, where the
amount of shots requires can be selected
by using the directional buttons.
The maximum number of continuous shooting pictures is determined by the
selected image quality and recording size.
1
By pressing Enter in the “Burst Set” menu, you will be able to return to the
“Capture” Screen. The shooting number will then be displayed underneath
the continuous shooting icon.
2
If you press the MENU button, the setup MENU frame is cancelled and the
camera is ready for the continuous shot.
3
Reference
°§
The flash will not work when continuous shooting is selected.
°§
In case of the *.TIF of the super high image quality mode, the
continuous take mode does not work and you can use only one shot
take mode.
°§
If you want to stop the continuous shot while you are using it, press
the power button.
Reference
°§
The *.TIF file of the super high image quality dos not support the
interval shot.
°§
If you want to stop the interval shot while you are using it, turn the
mode dial or press the power button.
Continuous shooting munber is marked.
L A R G E S M A L L
3°æ1 6°æ1 1 2 °æ1 1 2 °æ1 2 4 °æ1 4 8°æ1
SETTING UP THE SHOOTING FUNCTION
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ42
4 5
SETTING UP THE SHOOTING FUNCTION
°· FLASH
°§
There are 4 flash modes.
°§
Select and use the proper flash mode according to the shooting conditions
°· SELF (
self timer
)
°§
To set up the self timer, press the shutter button and the picture will be taken
10 seconds later.
°ÿ
Red Flashing LED Self Timer Marker (next to the flash)
- For approximately 7 seconds after pressing the shutter button the LED will
flash slowly in 1 second intervals.
- During the remaining approximate 3 seconds the LED will flash rapidly in
second intervals.
°ÿ
If thesound function has been selectd, the light will be accompanied by a
‘beeping’ sound.
°§
When the self timer has finished the camera will revert back to taking photos
without self timer.
: The flash is disabled.
: The flash will work when necessary, however if
the background is too bright, the flash fading will
come into operation and will also be controlled
automatically. The brighter the background or
subject is, the weaker the flash fading.
: If an object or background is dark, the camera
flash works automatically and will reduce red
eye by automatically using the red-eye
reduction function.
: If an object or background is dark, a
cameraflash works automatically.
Auto flash
Fill–in flash
Flash off
Auto flash and
Red eye reduction
4 4
SETTING UP THE SHOOTING FUNCTION
If you press the Enter button after selecting the moving images record size with
the four-direction button and the shot time on the setup the moving imagew shot
frame, it goes back to the setup MENU frame and the selected the moving
images shot time is displayed as updated. If you press the MENU button at this,
the setup MENU frame is cancelled and the camera is ready for the moving
images shot take.
1
If there is not enough space on the memory card, the moving image
shooting will be CANCELLED.
2
If the set time of moving image shooting has not expired the shooting will
continue until it has finished.
3
Recording size and shooting time and file form of moving image shooting as
shown below.
4
Recording size shooting time file form
1 9 2 °ø144 Pixel 1 0 ~ 3 0 s e c . * . A V I
4 0 0 °ø296 Pixel (5sec. interval)
¢Ú
Moving image
°§
You can shoot a moving image up to a maximum of 30 seconds.
°§
When the setup is completed, it is automatically set up as one shot take mode.
¶_
Press Enter and the “Movie Set” screen will
appear. You will be able to change the
“Rec size” and “Rec Time” by using the
directional buttons. Press Enter and the
“Capture” screen will appear again.
Go into the “Capture” menu and select the
moving image icon under “Type”.
Reference
°§The quality of the shot is set as ( )(1/16) when you shot a moving image.
That is, you can take pictures regardless of the selection of the image quality on
the PROPERTY function block.
°§If you want to stop the moving images shot while you are using it, press the
power button.
°§You cannot take the moving image shot in dark places (slower than 15 frame/sec).
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ44
4 74 6
SETTING UP THE SHOOTING FUNCTION
°·W.B (
White Balance
)
The colours of the pictured image may alter according to lighting conditions
during shooting. By using this function, you will be able to obtain more
naturally coloured images depending on light conditions.
- Auto : Camera automatically selects the optimum white balance
depending on the conditions of the ambient lighting.
- Sun light : This white balance should be used to obtain shots in
normal outdoor light conditions.
- Fluorescent light : This white balance is suitable for indoor shooting
under fluorescent light conditions.
- Artificial light : This white balance is suitable for indoor shooting with
artificial or tungsten light ing.
Change the set status by using the 4 directional buttons on the ADVANCE menu screen.
A D V A N C E
SETTING UP THE SHOOTING FUNCTION
°·E.V
This camera will control the exposure value automatically although you can
also adjust it manually.
°§
Select the exposure value by using the left and right directional buttons
after moving the cursor bar onto EV.
¶_
If you increase the exposure you will obtain a bright er image.
¶_
If you decrease the exposure quantity you will obtain a darker image.
°·D . Z O O M
°§
If you select ON, the function of digital zoom is selected and it remains
regardless of the power ON/OFF setup.
¶_
Because this camera support the digital zoom of up to two times, you can get
shot of six times zoom if you use it with the optical zoom of three times.
¶_
Refer to the page 34 about the detail information on the digital zoom shot.
°§
If you select OFF, the function of the digital zoom is cancelled.
Reference
°§
Start setting the exposure compensation : 0EV
¶_
This camera controls the exposure value automatically.
°§
The set range of the exposure compensation is : -2.0 ~ +2.0EV
( 0.25EV interval )
°§
The set exposure compensation value will remain until the power is
turned off. When you switch on the power again the exposure
compensation will automatically set itself to 0 EV (cancelling the
exposure compensation )
°§
If you select the exposure compensation value, the exposure
compensation( ) will show on the LCD on the top panel of the
camera.
°§
Be cautious when you use the exposure compensation because the
liquid crystal monitor looks black and the exposure lacks if you use
exposure compensation inside and LCD panel looks white and the
saturation can happed if you use + exposure compensation outside.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ46
4 9
SETTING UP THE SHOOTING FUNCTION
°§
Warning sound of a card
There are circumstances when no warning sound will be heard:
¶_
When you take out a memory card.
¶_
When there is no available space for images on the memory card.
¶_
Pushing the shutter button or turning the mode dial when the memory
card has not been formatted or when there is no memory left on the
memory card.
°§
When you turn on the power
It sounds the power button sensor(beep~!) regardless of the setup of buzzer
operation .
°·PWR OFF
(Power off)
This function switches the camera off after a set amount of time to prevent
unnecessary battery drainage.
°§
Automatic power off time can be set at any 1 minute interval, from 0 to 10
minutes .
¶_
If automatic power off is set to 0 this function will not work.
°§
However, the automatic power interception does not work during the slide
show if you use computer-connecting( ).
°·LCD BRT
(LCD brightness adjustment)
This function allows you to control the brightness of the LCD.
°§
You can choose from 7 levels of brightness.
°·BEEP
(buzzer sound)
If the beep is set to on, you can confirm the camera’s working status
according to the button sound. There will be a warning sound if a card
disorder occurs and a continuous beep when the self timer is counting.
°§
The Buzzer will sound when any button is pressed. When a button is
pressed for an available mode a beep will sound to signify that the camera is
working.
¶_
When you press a button, this buzzer will sound once.
¶_
When you turn the mode dial, the buzzer will sound twice.
°§
Self Timer Buzzer
°§
After approximately 10 seconds after pressing the shutter button there will
be a long beep which will mean that the Self Timer about to take a picture.
¶_
For approximately the first 7 seconds the count will be heard at 1 second
intervals
¶_
During the remaining approximate 3 seconds the count will be heard at
1/2 second intervals.
4 8
SETTING UP THE SHOOTING FUNCTION
Change the set status in the SYSTEM menu screen by using the 4 direction
moving buttons.
S Y S T E M
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ48
5 1
SETTING UP THE SHOOTING FUNCTION
°·VIDEO (
Setting the video output
)
You can set up the Video output sign from the camera in NTSC or
PAL type depending on the type of the outer machine (monitor or
TV, etc.) connected. Select a type that suits the Video type of the
outer monitor. PAL mode can support only BDGHI type.
5 0
SETTING UP THE SHOOTING FUNCTION
°·DATE/TIME
°§
The date and time can be selected. This will allow you to put the date and
time on your photos.
¶_
If you press the ENTER button after selecting the date and time, the date
and time will be displayed on the LCD monitor.
Select the date and time icon and then press Enter. You will then be able to
enter the date and time with the 4 directional buttons. Once you have
completed this press Enter again and you will return to the date/time screen.
The date and time will now have been updated.
¶_
Once Enter has been press the seconds will start counting from 0.
1
This camera will automatically correct the date when a leap year occurs.
¶_2 0 0 0 ~ 2 0 5 0≥‚(autocorrection of a leap year and month)
2
When you select VIDEO, the following screen is displayed on LCD
panel.
1
Press the Enter button after you select the Video output type you
want.
2
If you press the MENU button after setup, “setup MENU” frame is
cancelled.
3
Note
¶UAfter removing the battery the date and time function will remain
active for about 1 hour.
¶UIf the camera is left without a battery inserted for an hour or more
you will need to reset the date and time.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ50
5 3
PLAY MODE
Setting play mode
Press the MENU button
If you press the MENU button with the power on, the setup MENU mode is
displayed.
®A You will now see the menu screen appear on the LCD monitor.
1
Indicating way of a manual set mode of a liquid monitor on play
mode.
(1)
By pressing the MENU button an introduction screen will appear as
below
(2)
When pressing the up/down directional buttons, the chosen function will
be highlighted on the menu screen.
(3)
If you press the ENTER button after highlighting the function item, the
chosen function is selected.
(4)
If you press the ENTER button on the menu starting screen, the menu
set mode will be cancelled.
2
Reference
The following conditions will not allow you to enter the menu screen
¶UWhen you are pressing any other button
¶UDuring processing time (eg. Image saving/deleting)
¶UWhen the battery is exhausted
°[
Display of the beginning frame
°\
5 2
PLAY MODE
Starting the play mode
Turning the mode dial( )to play mode will allow you to play any pictures or
moving images stored on the memory card.
°·
Play mode( )
When play mode is selected the LCD on the top panel will show and
the battery status. No other icons will appear on the LCD.
¢÷
Checking the battery
The standards to decide the condition of the battery is same as the shot
mode and please refer to the ‘Indicator for the condition of the battery on
page14.
°·
Starting the play mode
Reference
¶UWhen the camera is reading the data on the memory card the green
LED next to the viewfinder will flash. Once all the data has been
read, the green LED will stop flashing.you will need to reset the date
and time.
After switching the camera on, turn the mode dial( )to play.
1
When play mode is selected the LCD on the top panel will show and
the battery status. No other icons will appear on the LCD.
2
The LCD monitor will switch itself on automatically.
¶_
The last image stored on the memory card will be displayed on the LCD
°ÿ
You will not be able to switch the LCD monitor off manually whilst the
camera is in playback mode.
3
THUMBNAIL
SLIDE SHOW
LOCK / Unlock
ERASE ALL
FORMAT
Select : Enter
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ52
5 5
PLAY MODE
Press the ENTER button after selecting the THUMBNAIL option. 9
thumbnail screens will be marked out on the LCD monitor.
¶_
The image displayed on frame 1 is displayed as highlight.
1
When you press the UP or DOWN button, the highlight sign moves up or
down by one space and when you press the LEFT or Right button, the
highlight sign moves left or right by one space, and the image selected is
displayed.
2
Once you have highlighted an image in the thumbnail screen, pressing
ENTER will show you that shot in full size.
3
°§
This function allows you to view 9 images at the same time.
Press the
ENTER button
Highlight
(a chosen image)
°[
1 image screen play mode
°\ °[
Thumbnail play mode
°\
°fi
The moving order of highlight
11
4
7
2
5
8
3
6
9
T H U M B N A I L
5 4
PLAY MODE
T H U M B N A I L
°§
The thumbnail view allows you to
view up to 9 images at a time.
1
SLIDE SHOW
°§
Images can be displayed at pre-set
intervals.
2
PROTECT
(LOCK/UNLOCK)
°§
This function prevents existing
images being lost accidentally
.
3
ERASE ALL
°§
This will erase all images stored on
the compact flash card.
4
FORMAT
°§
This function initialises the
compact flash memory card by
formatting the data.
5
Play function list
°·
The LCD display is as follows:
T H U M B N A I L
SLIDE SHOW ¢ ’03 ¢ Ús e c
P R O T E C T ¢’UNLOCK ¢ Ú
ERASE ALL
F O R M A T
Reference
¢Ú
A buser sound
¶U
If beep is set on in a manual set mode of a shooting mode and the available
button is entered in play mode according to the working state of a camera,
button percieving buser sounds.
°ÿ Button entering percieving sound is out one time after entering a
button.
°ÿ The Buttons that button entering percieving buser sounds.
- When you push POWER , MENU, ENTER, /STATUS
buttons
- When you push the moving button ( up/down/left/right)
Reference
When the moving images is played on frame 1, it operates as follows
is you press the ( ) button.
¶UWhen it is stopped: it begins to display the moving images.
¶UWhen it is displaying the image: it pauses to display the moving
images.
¶UWhen it pauses to display the image: it continues to display the
moving images.
E R A S E
F u n c t i o n
i t e m s
5
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ54
5 7
PLAY MODE
Move the cursor on [protect] position on the beginning frame and select
[lock or unlock] with the LEFT
(¢ ’)
/RIGHT
(¢ Ú)
button, and the image is locked
or unlocked.
°ÿIf you select [protect]
(¢ ’)
lock
(¢ Ú)
with the LEFT
(¢ ’)
/RIGHT
(¢ Ú)
button
: the unlocked image is locked.
°ÿIf you select [protect]
(¢ ’)
unlock
(¢ Ú)
with the LEFT
(¢ ’)
/RIGHT
(¢ Ú)
button
: the locked image is cancelled.
1
Cancel the setup MENU mode by pressing the MENU button.
2
°§You can lock the important images which are already taken or cancel the
locked images.
PROTECT ( L o c k / U n l o c k )
Lock mark
°ÿ
It is not indicated when the
image is unlocked
Reference
°§
The locked image is protected on [ERASE (image 1 erased)] or
[ERASE ALL(all images deleted)], but deleted on [FORMAT
(memory card begins)].
1 7
5 6
PLAY MODE
If you push ENTER button after selecting a bar cursor into [SLIDE SHOW]
in a manual starting screen status, SLIDE SHOW is executed.
°ÿ
SLIDE SHOW
°§
Highlight slide show and press ENTER. The LCD will give a time
interval option between 1-10 seconds.
Use the left/right directional buttons to select the required interval
(pre-set at 3 seconds).
1
Pressing ENTER again will cause the show to pause( ).
2
When you press the ( ) button again, the ‘slide show’ continues to be
displayed.
3
To stop the slide show, press the menu button twice.
°§
Pressing the MENU button again will cancel the menu function.
4
°§
You can view each image at a set interval using the slide show function.
3 3
= PAUSE =
SLIDE SHOW
Reference
¶UIt does not support the *.TIF file form in slide show.
°[LCD panel indication system°\
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ56
5 9
PLAY MODE
Reference
Erasing one cut image
: Only one cut image is deleted out of images stored in a compact
flash memory card.
1. select the image that you want to erase.
2. If you push STATUS / button, the messages like below
appears on a liquid monitor.
3. After moving a bar cusor into YES or NO with up and down button,
push ENTER button.Then the action like below is executed.
¶UAfter selecting YES, when you push ENTER button
¢—After erasing image stored in a memory card, the next stored
image is displayed on a liquid monitor.
¶UAfter selecting NO, when you push ENTER button
¢—The screen comes back to the chosen image screen.
5 8
PLAY MODE
If you push ENTER button after moving a bar cursor into ERASE ALL in a
manual starting screen status, the messages like below appears on a liquid
monitor.
1
Select YES by highlighting it and then pressing ENTER.
°§
All the images on the card will then be erased.
¶_
The image counter will register no images.
Locked images will not be deleted.
°§
AFTER selecting NO, when you push the ENTER button
¶_
A manual starting screen is back and ERASE ALL of the screen is
highlighted. When deleted, the setup MENU mode is cancelled if you
press MENU.
°ÿ
Whilst images are being erased the
red LED will remain illuminated.
The green viewfinder LED will flash
to indicate that all images have been
erased.
°ÿ
Normal operation will be resumed by
either selecting a new mode using
the mode dial or when the camera is
powered down and back up.
2
°§All image data which is saved in compact flash memory card is to be erased.
ERASE ALL
Note
°§
Erasing images will clear the memory of all information (except
locked images). You must transfer any image files that you want to
save to another medium before erasing takes place.
E R A S E
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ58
6 1
PLAY MODE
°§
When viewing a single image on the LCD panel you can zoom in to
enlarge a portion of the image. Simply press the zoom (T) button to
enlarge the image.
°ÿ
The scale of enlargement of the shooting image is as follows.
°§In case of recording size is large : 1.5/2.0/3.0/4.0/5.0 times.
°§In case of recording size is small : 1.5 ~2.5 times (0.5times interval)
°ÿ
When an image is enlarged, you may use the directional control to select
a particular part of the enlarged image.
°ÿ
Pressing the (W) wide button will reduce the level of enlargement.
¶_
You can distinguish the extended position of the image by the indicator
on upper left on the liquid crystal monitor [digital extension magnification
/
no indication(the original shot image)].
Enlarging image
Reference
°§
Compact flash memory card as follows should be in the beginning
stage of memory card:
- the compact flash memory card that is not initializd
- the compact flash memory card that a camera can’t percieve.
6 0
PLAY MODE
After moving the bar cursor to FORMAT, press ENTER then the following
messages will appear on the LCD monitor.
1
Move the bar cursor into YES or NO with the up and down directional
buttons. Then press the ENTER button for the action to be executed.
°§
After selecting YES, when you push ENTER button
¶_
After formatting the memory card, a NO IMAGE message will appear
on the LCD monitor.
°§
After selecting NO, when you push ENTER button.
¶_
A screen is back to a manual starting screen and FORMAR of the
screen is highlighted. When deleted, the setup MENU mode is
cancelled if you press MENU.
°ÿThe LED symbol during formatting
The green LED on the top right of
the viewfinder will flash until formatting
is finished.
°ÿFORMAT
This function will configure the memory
for the compact flash card. It will now be
ready to take pictures.
2
°§
This function is for formatting a compact flash memory card. Formatting the
card allows data to be stored on it.
FORMAT
Note
°§
[ERASE ALL] function is for erasing only image files of a memory
card that a camera can percieve but [FORMATTING] function is for
deleting all data of a memory card.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ60
6 3
CONNECTION TO AN EXTERNAL MONITOR
Connection to an external monitor.
°§
Connect the video connection terminal on the Digimax 210 to an external
monitor with a connection cable. Set the Digimax to play mode or moving
images to view them on the external monitor. The LCD monitor will
automatically switch off.
¢—
The information on the external screen will be exactly the same as on the
LCD monitor on the camera.
°·
Selecting the Video output type
°§
You can select an NTSC or PAL video output signal, depending on the
external equipment.
¢—
Refer to the [setup the Video output mode] on page 51 about the
selecting the video output indicator from the camera.
Reference
°§
When using a TV as an external monitor, you will need to select the
external or AV channel.
°§
If there is noise (the picture is fuzzy) please refer to your TV manual
for more information.
°§
If the picture is not in the centre of the screen, please use the TV
controls to centre it.
6 2
PLAY MODE
°§
You can print out the saved images in compact memorycard as much as you
set up with the digital photo printer which supports DPOF.
DPOF (
Direct Print Ordering Format
)
If you put the LCD/ button under the state of the first monitor display
in the play mode, the below messages appear on a liquid monitor.
1
Press the LCD/ button once to display 'No of prints 'message on the
monitor. Use the left and right directional buttons to change the print
number.
¢—
The maximum print number is 9
2
After removing the compact flash card and inserting it into a digital photo
printer, you will be able to print out the preset images.
3
D P O F
D P O F
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ62
6 56 4
PC CONNECTION MODE
Setting the PC connection mode.
Starting a menual set mode
Press the MENU button after switching the camera on.
°Ê
The initial menu screen will appear on the LCD monitor.
Reference
You will not be able to use manual mode under the following conditions
°§
When another button is still pressed down.
°§
When the battery is exhausted.
1
Setup MENU mode of the LCD panel on the connecting to the computer
mode
(1)
When pushing the MENU button, the initial screen will appear as below.
(2)
If you use the internet with RS-232C: Select the number you want with
the LEFT or RIGHT button on the beginning frame.
(3)
Please cancel the ‘setup MENU’ mode by pressing the MENU button
after set up the download speed. You cannot select menu while the shot
image is being download.
2
°[Display of the beginning frame°\
S p e e d
PC CONNECTION MODE
Starting PC connection mode.
°§
If you select mode dial position with the power on, the camera is
transferred to the “connecting to the computer mode” which can download the
shot images saved in memorycard.
°§
Batteries will drain at a faster rate when using PC connection mode.
°·
Indicators for the shot information on connecting to the PC mode ( )
The condition of the battery and the letters are displayed on the indicators
for the shot information on connecting to the computer mode and the other
indicatiors are off.
°·
Checking batteries.
The standards to decide the condition of the battery is same as the shot
mode and please refer to the ‘Indicator for the condition of the battery on
page 14.
°·
Starting PC connection mode.
Connect the cable to both the PC and the video terminal on the camera.
Refer to the page 82 on ‘software manuel’ about the connecting to the
computer.
1
Turn the power on and turn the mode dial to ( ).
2
The battery conditions and a character marks on the picturing information
indicator.
3
Note
°§
If you connect the camera to the computer using the battery in
camera, it is easier use AC adapter because extended use is
impossible.
Reference
°§
If you download the shot image by connecting the camera to the
computer with the RS-232C cable, you can select the downloading
speed per second among the followings.
¢—115200, 57600, 38400, 19200, 14400, 9600
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ64
6 76 6
PC CONNECTION MODE
Function of PC connection mode
Note
°§Execute the edit software, after provided with a camera TWAIN
Driver is installed.
Refer to page 75-78 for software installation instructions of TWAIN
Driver.
Downloading your images.
°§
Once you have downloaded your images to the hard disk, you can then
edit and print them.
(1)
Connect your camera to a computer by using the USB or RS-232C
cable.
(2)
Download the image editing software provided with the camera.
°Ê
Refer to page 75-100 for software installation instructions.
1
NOTE IN USING
¢Ú
This camera is composed of very sophisticated parts, If exposed to any of
the following unsuitable environmental conditions the cameras operation will
be impaired. The camera should be kept away from.
°§
Severe changs in temperature and humidity.
°§
Dust and dirt.
°§
Direct sunlight or the inside of a vehicle in hot weather.
°§
Do not place the camera in an environment where there is high magnetism
or excessive vibration.
°§
An area with high explosives or highly flammable materials.
°§
Pesticides, Dust and VinylNever bring into contact with sand.
¢Ú
Never bring into contact with sand.
°§
If sand gets into electronic devices like Digimax210SE it can cause severe
malfunctions. Please ensure that there is no contact with sand or similar
particles.
¢Ú
Always be cautious not to expose to extremes in temperature.
°§
If the device is transferred from cold place to hot on or vice versa,
condensation can be caused inside the device. If moisture gets into the
camera turn off the device and wait about 1 hour until all moisture is
dispersed. Similarly, moisture build up can happen in CF Card. If this
happens turn off the device and remove the CF Card, then wait until the
moisture has dispersed.
¢Ú
Caution with the Lens.
°§
Avoid direct sunlight to lens. Direct sunlight can affect Complementary
Metal Oxide Semiconductor(CMOS) by causing overheating and fading.
¢Ú
If the Digimax 210SE is not used for a long period, electric discharge can
occur. Please make sure the device, batteries, and CF Card are stored
separately.
C a u t i o n !
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ66
6 96 8
BEFORE CONTACTING SERVICE CENTER
¶U
Batteries need replacing.
¶U
Replace batteries with new ones
¶U
AC Power Adapter
¶U
Connect AC Power Adapter.
is not connected.
¶U
Batteries need replacing
¶UReplace batteries with new ones
¶UCamera has shut off automatically ¶U
Power on
¶UThe card is taken off before the ¶U
Do not remove the memorycard
image is saved in the memorycard. while you save the image.
¶U
The adapter jack is off because it loosens.
¶U
Plug in the adapter jack again.
¶UExternal temperature is too cold. ¶UKeep batteries at the correct
t e m p e r a t u r e .
¶U
The camera has old and
¶UReplace all batteries and
new batteries
insert new ones
¶UCF Card is not inserted ¶UInsert CF Card
¶U
The memory card has not been inifialised.
¶UI n i t i a l i s e
¶UMemory card are almost drained. ¶U
Insert new CF Card from manufacturer
¶U
The power has not been switched on.
¶UPower on.
¶UThe batteries are weak. ¶UReplace batteries with new ones
¶UThe camera is not set to ¶UShooting mode
shooting mode.
¶U
Select the macro mode in case it is
¶UYou select the wrong shot mode.
within 80 cm and select the
general mode in case it is over 80cm.
¶UThe camera is flash off ¶UThe flash off mode is canceled.
¶UThe wrong date/time is displayed ¶U
Select the appropriate number in
or saved as the basic number.
MENU mode.[Refer to the selecting
DATE/TIME on the page 21.]
Before contacting service center (please check the following)
Warning indicator
The power is
not turned on
If the power
will not turn on.
Battery power
is drained
quickly.
Camera does not
take pictures
when pressing
the Shutter
b u t t o n .
The flash mode
does not work.
The focus cannot
be adjusted.
The wrong date
/time is displayed.
¶U
No memorycard
¶U
Insert the memorycard.
¶U
The card cannot be read.
¶U
Insert the memorycard again.
¶UThe capacity for shot in ¶UReplace the card with the
memorycard is lacking. new one or use it after you
erase the locked image.
NOTE IN USING
¢Ú
Maintenance
°§
To clear the Lens or LCD Status panel, a soft brush should be used. If this
does not work lens-cleaning paper with lens cleaning fluid can be used.
°§
Clean the camera with a soft cloth or a mild detergent. It may cause the
deterioration, deformation or falling off the paint.
°§
The LCD moniter can be damaged very easily, please ensure that it does
not come into contact with any sharp impact.
¢Ú
Do not attempt to disassemble or modify the device by yourself.
°§
The warning indicator displayed on the shot information indication is as follows.
¶UPlease turn the power off and
turn it on again.If it happens
again, please ask for the repair
service to the near Samsung
service center.
¶UThe camera indicates abnormal
operation.
warning
indicator
warning contents treatment
Symptom Cause Steps
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ68
7 17 0
SPECIFICATION
compact digital camera
1/2.7” color CCD CMOS Sensor with 210 thousands pixel
Focusing range : f=5.8~17.4mm
Iris : F2.8(W) ~ F4.9(T)
real image & LCD moniter
1.8”color TFT LCD
Compact Flash card
J
PEG(observes the DCF standard), TIFF(non-compression), AVI(Motion JPEG) & DPOF support
1 image deletion/continuous shooting/ interval shooting/Moving image shooting
L(1600X1200 pixel): Highest picture quality shot 8°æ1( 1sheet in case of TIF)
Highest picture quality 15 °æ1, Standard picture quality 30 °æ1
S(800X600 pixel): Highest picture quality shot 30°æ1 (5 sheet in case of TIF)
Highest picture quality 59°æ1 , Standard picture quality 114°æ1
Normal :0.8m~°ƒ
Macro : 0.2m~0.8m
Auto / Auto & Red - eye reduction/ fill-in flash / flash off
Shooting: 2 times, playing : Large - 5 times, Small - 2.5 times
1/2 sec ~ 1/10.000 sec
program AE
about 10 sec. delay shooting
0 minute (OFF) / 1~10 minute(Except PC mode)
1 image / thumbnail / Slide show
1 image deletion / all deletion / Format
Video output : NTSC / PAL (BDGHI)
Digital output connector : USB / RS232C
DC power output connector : 6.0v
255g (excluding batteries & card)
114.5(W) °ø 56.1(D) °ø 7 0 . 7 ( H ) m m
Windows 98/2000 : TWAIN Driver, Direct Download
MAC OS over 8.6 : TWAIN Driver, Direct Download
Photo deluxe 3.0 home Edition
T y p e
Image sensor
L e n s
Viewfinder
Requid moniter
S t o r a g e
R e c o r d i n g
Shooting mode
Focus distance
F l a s h
Digital Zoom
Shutter Speed
Exposure
Self Timer
Auto power off
Image play
Image delete
Power input/
O u t p u t
W e i g h t
Bundle software
D e m e n s i o n s
PC software
The number of
stored images
possible with an 8MB
memory card is as
f o l l o w s .
BEFORE CONTACTING SERVICE CENTER
¶UCamera not functioning prorerly ¶URemove the batteries and
insert them again.
¶UThere is a difference of the ¶U
Start the memorycard and use it.
beginning memorycard.
‘Refer to the FORMAT on the page 60.]
¶U
There is any trouble with the W.B mode.
¶UThere is excessive exposure. ¶UReset exposure compensation.
(Refer to page 47 E.V.)
¶UThe lens is smudged or dirty. ¶U
You should clean the lens.
¶UThe video cable is not connected
to the camera or external
m o n i t o r . ¶Uconnected properly
¶UThe incorrect memory card
is not recording properly.
¶UCable is not connected properly ¶UCheck the connections
¶UCamera is off. ¶UTurn on the camera
¶UThere is no battery or the adapter ¶UInsert new batteries or connect
is not connected. with AC Power Adapter.
¶UOS is not Window 98/2000 or ¶UInstalling Window 98/2000 or
PC is not equipped with u s e RS232C port.
USB port .
¶UUSB driver is not installed ¶UInstall USB Driver.
¶UCable is not properly connected. ¶UCheck the connections
¶UCamera is off ¶UTurn on the camera
¶UCamera has no batteries or not ¶ULoad the new battery or
connected with AC Power Adapter. check the adapter.
The play screen is
displayed on the
external Monitor.
The camera dees
not download files
into PC
The camera dees
not download files
into PC
Camera fails to work
by any button or
s w i t c h
There is something wrong
with the color of captured
i m a g e .
The screen is too
b r i g h t .
The screen is not very
c l e a r .
The card error indicator is on
with the memorycard
i n s e r t e d .
Symptom Cause Steps
¶U
There is any trouble with the W/B mode. Set
up the right one for each light source. [Refer
to W.B.(white balance) on the page 46.]
°ÿSpecifications are subject to without prior notice.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ70
7 37 2
SOFTWARE MENUAL
¢Ú
Software Notes
°§
The attached pieces of software are Twain Driver for the Digmax 210SE, Direct
Download Program and an editing software.
°§
This software is copyright and is only licensed for one-time use with the Digimax
210SE Under no circumstances should you or anyone else reproduce all or part of
either the software or the instruction manual.
°§
In the unlikely event of a manufacturing fault, we will repair or exchange your Digimax
210SE. However, we cannot be held responsible for damage caused by inappropriate
u s a g e .
°ÿ
Windows is the registered trademark registered in Microsoft of USA and other
c o u n t r i e s .
°ÿ
Macintosh, Mac OS is the registered trade mark of Apple Computer, USA.
Please ensure that you read the instruction manual carefully before using the camera.
Contens
ßôBefore you set up the software°¶°¶°¶°¶°¶ 7 3
Introduce the software°¶°¶°¶°¶°¶°¶°¶°¶°¶ 7 3
Introduce TWAIN Driver °¶°¶°¶°¶°¶°¶°¶°¶ 7 3
System Requirements °¶°¶°¶°¶°¶°¶°¶°¶°¶ 7 4
ßôHow to set up the Software °¶°¶°¶°¶°¶°¶ 7 5
ßôFor windows °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 7 6
Set up the TWAIN Driver°¶°¶°¶°¶°¶°¶°¶°¶ 7 6
Set up the USB TWAIN Driver °¶°¶°¶°¶ 7 6
Set up the RS232C TWAIN Driver °¶°¶°¶ 8 2
Set up the Direct Download °¶°¶°¶°¶°¶°¶ 8 4
Set up the editing software °¶°¶°¶°¶°¶°¶ 8 6
Connect the camera°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 8 7
Connect the USB port °¶°¶°¶°¶°¶°¶°¶°¶ 8 7
Connect the RS232C port °¶°¶°¶°¶°¶°¶ 8 7
How to use Direct Download program °¶°¶ 8 8
How to use TWAIN Driver °¶°¶°¶°¶°¶°¶°¶ 9 1
How to use editing software °¶°¶°¶°¶°¶°¶ 9 3
How to remove the driver and program 1 0 2
How to solve the problems °¶°¶°¶°¶°¶°¶ 1 0 7
ßôFor Mac °¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶°¶ 1 0 9
Set up the TWAIN Driver °¶°¶°¶°¶°¶°¶°¶ 1 0 9
Process of setting up for using
TWAIN Protocol °¶°¶°¶°¶°¶°¶°¶°¶°¶ 1 0 9
Set up the USB TWAIN Driver °¶°¶ 1 1 0
Set up the Serial TWAIN Driver °¶°¶ 1 1 0
Set up the Direct Download °¶°¶°¶ 1 1 1
Connect the Camera°¶°¶°¶°¶°¶°¶°¶ 1 1 2
Connecting the USB port°¶°¶°¶°¶°¶ 1 1 2
Connecting the internet port °¶°¶°¶ 1 1 2
How to use Direct Download program °¶°¶ 1 1 3
How to use TWAIN Driver °¶°¶°¶°¶°¶°¶°¶°¶ 1 1 5
How to solve the problems °¶°¶°¶°¶°¶°¶°¶ 1 1 7
BEFORE YOU SET UP THE SOFTWARE
¢Ú
Direct Download Program
°§
This is the program you can save all the images saved in the memorycard of the
camera directly in the harddisk of the computer.
¢Ú
Adobe PhotoDeluxe assumption version
°§
This is the program that you can edit and save the stopped images you download from
the camera. This software is provided for Windows and you must set up TWAIN Driver
provided for use.
Introducing the softwa r e
¢Ú
What is TWAIN Driver?
TWAIN Driver makes you easily connect the image related device such as Samsung
digital camera Digimax 210SE to the graphic related computer program.
Also, you can directly pick up the image from the image device in graphic programs
which support the TWAIN Driver, can edit them and can control the device, thus it
helps the users get the image they want from the device.
Digimax 210SE TWAIN Driver for Macintosh is made considering the software which
is the most generally used in Macintosh. Thus, it can be used for the design related
w o r k .
¢Ú
Before setting up the TWAIN Driver
Although Samsung digital camera Digimax 210SE provides both TWAIN Drivers for
USB and Serial, it is recommended to set up the USB TWAIN Driver for the computer
with USB connecting jack.
Introduce TWAIN Dri ve r
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ72
7 4
BEFORE YOU SET UP THE SOFTWARE H OW TO SET UP THE SOFTWA R E
¢Ú
For windows
computer : Personal computer with processor better than MMX Pentium 200 MHz
Operating System : Windows 98, 98SE, 2000
M e m o r y
:
Minimum 32MB RAM .
Others
:
Serial port, USB port
140MB and free hard disc space.
16 bit color display adapter and compatible monitor,
800X600 pixel resolution
(24 bit color display adapter and true color display, etc. are
r e c o m m e n d e d . )
¢Ú
For Macintosh
computer : PowerMac with built-in GeoPort(DMA – support Serial Port)
PowerMac G3, G4, iMac series with built-in USB Port
Operating System : better than Mac OS 8.5(set up better than QuickTime 4.0)
M e m o r y
:
memory with margin over 16MB
Others :
USB port , communication port
System Requirements
(2000
S e p t e m b e r
)
°· When you put the Drive CD-ROM provided with this camera into the CD-ROM drive, the
following frame is automatically run.
1. Setup the Driver
Select the driver you want on the above frame.
Refer to the page 76 in case of the USB TWAIN Driver setup for Windows.
Refer to the next contents for the details about setting up the Driver.
¶USetup the RS232C TWAIN Driver for Windows : page 82
¶USetup the Direct Download_USB program for Windows : page 84
¶USetup the Direct Download_Serial for Windows : page 85
2. Internet link
You can link to the Samsung homepage through the internet.
¶Uhttp://www.samsungcamera.com : English
¶Uhttp://www.zoomin.co.kr : Korea
How to set up the software
7 5
Reference
°§You need 5~10 seconds for running the automatic setup program according to
the capability of the computer. If the frame is not displayed even after this, run
the [Windows search] and select "Samsung.exe" in the CD-ROM Drive root
d i r e c t o r y .
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ74
7 77 6
SET UP THE TWAIN DRIVER (FOR WINDOW S )
Click on the [next] button when
the next screen is shown
4
Move the files you need
from the [set up Driver] CD
p r o v i d e d .
5
[USB TWAIN Driver]
installation was
finished.Now click the
‘finish’ button
6
When installation has completed
successfully you will be able to
see [Samsung Digimax 210SE
Camera] in the [Imaging device]
bar at the bottom right of the
monitor. If you want to see
installing administrator, Click
orderly [ initiating menu®A
s e t t i n g®Ac o n t r o l l e r®Ae q u i p m e n t
administrator ]
7
SET UP THE TWAIN DRIVER (FOR WINDOW S )
Installation of the USB Twain Dri ver (Windows 98)
After connecting the computer
and the camera via the USB
cable the message [new
hardware additional wizard] will
be displayed on your screen.
Click [next] to proceed.
1
After selecting [searching a
driver best appropriate for
installation], click [Next]
b u t t o n .
2
Insert the [set up Driver] CD
in CD-ROM drive and
select [CD-ROM drive] on
the next frame and click
‘ n e x t ’ .
3
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ76
7 97 8
SET UP THE TWAIN DRIVER (FOR WINDOW S ) SET UP THE TWAIN DRIVER (FOR WINDOW S )
Installation of the USB Twain Dri v er (Windows 2000)
After connecting the computer
and the camera via the USB
cable, the message °’F o u n d
New Hardware Wizard°pwill be
displayed on your screen. Click
°’N e x t °pb u t t o n .
1
After selecting °’Search for a
suitable driver for my
d e v i c e [ r e c o m m e n d e d ] °p, click
°’N e x t °pb u t t o n .
2
Insert the Driver CD in CD-
ROM drive and select °’C D -
ROM drives°pon the next
frame and click °’N e x t°p
b u t t o n .
3
Click on the °’N e x t°pbutton when
this screen is shown.
4
Click on the °’Y e s °pb u t t o n
when this screen is shown.
5
Move the files you need from
the Driver CD provided.
6
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ78
8 18 0
SET UP THE TWAIN DRIVER (FOR WINDOW S ) SET UP THE TWAIN DRIVER (FOR WINDOW S )
Note
Do as follows when the following frame is displayed while you are setting up USB
TWAIN Driver.
Insert the provided Driver CD
in CD-ROM drive and Click
°’O K°pb u t t o n .
1
Click [Search] on the next
frame, [open] the [MSVCRT.
DLL] files on the frame below
and then press the
[Confirmation] button.
2
°’USB TWAIN Driver°pi n s t a l l a t i o n
was finished. After clicking °’F i n i s h°p
button, restart the computer.
7
When installation has completed
successfully, you will be able to see
°’Samsung Digimax 210SE Camera°p
in the °’Imaging Device°pof the
°’Device Manager°p. If you want to see
°’Device Manager°p, click orderly
°’Start menu°Ês e t t i n g°Êc o n t r o l l e r°Ê
s y s t e m°ÊDevice Manager°p.
8
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ80
8 38 2
SET UP THE DRIVER (FOR WINDOW S )
Move the files you need from the Driver
CD-ROM provided.
4
Click [ Finish ] button.
Then RS-232C Twain Driver
installation is finished.
5
SET UP THE DRIVER (FOR WINDOW S )
Set up RS-232C Twain Driver
When you click Serial-TWAIN Driver on the frame displayed after you put the
provided [setup the Driver] CD into the CD-ROM Driver, the following frame is
d i s p l a y e d .
1
If this screen is displayed
click the “NEXT” button
2
Enter your user information and
then click the 'NEXT' button.
3
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ82
8 58 4
SET UP THE DIRECT DOWNLOAD PROGRAM
The Direct download set up is completed.
Click the [Finish] button.
5
When the set up is normally completed, it is
automatically registered on the Start Menu
program as next frame.
¢—
Click Serial-Direct Download on the frame displayed after you put the provided
[setup the Driver] CD into the CD-ROM Driver.
¢—
When the set up is normally completed, it is
automatically registered on the Start Menu
program as next frame.
6
Set up the
Direct Dow n l o a d - S e rial Program for window s
Note
°§
Please play Direct download_USB program after setting up the TWAIN
Driver first.
SET UP THE DIRECT DOWNLOAD PROGRAM
When you click USB -TWAIN Driver on the
frame displayed after you put the provided
[setup the Driver] CD into the CD-ROM Driver,
the following frame is displayed.
1
Click the [Next] button if you want to set up in
the folder provided from the next frame and
click the [Next] button after selecting the folder
you want with the [Browse..] button if you save
in other folder.
2
Click [ Next ] button after the beside screen is
displayed .
3
Move the files you need from the Driver CD.
4
Set up the
Direct Download-USB Program for window s
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ84
8 78 6
CONNECT THE CAMERA
°·
To download the images from Digimax 210SE to PC and edit them, both Windows
98(or 2000) and USB connecting jack are required.
°·
This is used when you want to download the taken images to the PC or edit in the
editing software using the computer without USB port.
Connecting USB connecting jack for Windows
Joining DIGITAL connection terminal ( RS232C print-out term i n a l )
Connect the USB cable to the USB port on the
c o m p u t e r .
1
Connect the other end of the USB cable to the
USB port of the camera.
2
Switch the camera on.
4
Set the mode dial.
3
Connect the RS232C cable to the COM port at
the back of the computer.
1
Connect the other end of the RS-232C cable to the
digital camera.
2
Switch the camera on.
4
Set the mode dial.
3
SET UP THE EDITING SOFTWA R E
Installation of Adobe Photo Deluxe 3.0 editing softwa r e
¢ÚThis software is provided only for Windows and guaranteed over Windows NT 4.0 with
service Pack 3 or Windows 95, 98.
When [Samsung digimax 210SE application] is inserted into the CD-Rom drive an
Autoplay screen like the one above will appear.
Follow the instructions on screen.
¢Ú
Once installation is complete
Autoplay will open the starting menu.
Reference
°§
If Autoplay does not appear automatically, double click on [Autoplay.exe]
which is located in the route directory of [Samsung digimax 210SE
a p p l i c a t i o n ]
Note
°§Please turn on the power after you connect the RS-232C to Digital connecting
terminal on camera for fluent communication such as prevention of the
communication error.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ86
8 98 8
H OW TO USE
DIRECT DOW N L O AD
P RO G R A M
To start Direct Download program:
H o w to start Direct Download program for Window s
Connect the cable (either USB cable or RS-232C cable) from the camera to a
connecting jack on PC.
1
Select the mode dial and turn on the power (of the camera).
2
Click [START DOWNLOAD] after starting Direct Download program. Refer to the
page 88 regarding how to start the program. The following are the functions of the
buttons in Direct Download program.
3
Select this button when you download all images stored
inmemory card
This button will download the latest image recorded.
(generally) Or, select this button when you want to
download the image in [play mode]
Select this button when you want to download JPEG and
TIFF format) the moving imges stored in memory card
Select this button when you want to download AVI
themoving images(AVI format ) stored in memory card
This button will download the shot images from camera to
c o m p u t e r .
Select this button when you want to cancel the action while
downloading. The image downloaded before selecting this
button will be stored in computer.
This button will specify the folder where the downloaded
images are to be stored.
S e c t i o n F u n c t i o n
ALL FILES
C U R R E N T
J P E G / T I F F
AVI FILES
START DOWNLOAD
SAVE AT
CANCEL DOWNLOAD
H OW TO USE
DIRECT DOW N L OAD
P RO G R A M
To start Direct Download program:
¢Ú
When USB cable is connected
The following screen is displayed when you click [START MENU -> PROGRAM ->
DirectDown USB-> Direct Down USB] in order or click [Direct Down USB] icon on the
beginning frame.
¢Ú
When RS-232C cable is connected
The following screen is displayed when you click [START MENU -> PROGRAM ->
DirectDown Serial-> Direct Down Serial] in order or click [Direct Down Serial] icon on
the beginning frame.
H o w to start Direct Download program for Window s
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ88
9 1
HOW TO USE TWAIN DRIVER
H o w to use TWAIN Dri ve r
TWAIN Driver is not used independently. TWAIN Driver should be brought in to other
graphic programs and be operated by them. The following is how to use the most widely-
used image-editing program. Refer to the page in 92 for more information regarding
[Adobe PhotoDeluxe Home Edition], image editing software for Windows.
First of all, User should select the TWAIN Source. Every program that supports TWAIN
has two items in the menu, or, [TWAIN Select Source *] and [TWAIN Acquire *].
Depending on whether the menu has these two items or not, you can decide whether
your computer supports TWAIN or not. After you are sure that the program supports
TWAIN, select TWAIN Source. Your TWAIN Driver may have more than one TWAIN
Sources if the computer has been connected to Image Devices such as scanner. In this
case of using digital camera, you should select digital camera source.
IF you select [TWAIN Select Source*], you will see this dialog box.
9 0
H OW TO USE
DIRECT DOW N L OAD
P RO G R A M
Âü°í
If the moving image you downloaded is not played, set up and use the video
compression codec.
Put the provided Driver CD into CD-ROM Drive.
1
Play the windows search and then click JPEG_Decoder folder in the
CD-ROM Drive folder.
2
The frame below is displayed when you select Jpegcode.inf in
JPEG_Decoder folder and then press the right button on your
mouse. When you select [installation], the video compression codec
is automatically set up.
3
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ90
9 3
HOW TO USE
EDITING SOFTWA R E
This software is provide only for Windows.
To open Adobe Photo Deluxe 3.0 click the start button at the bottom left of your monitor,
then click programs, then Adobe, and then double click on Photo Deluxe 3.0. Photo
Deluxe will now open.
H o w to open Adobe Photo Deluxe 3.0
9 2
Select [Samsung Digimax210SE Serial] if your computer has RS-232C connecting jack,
and select [Samsung Digimax210SE USB’ if your computer has USB connecting jack.
Then, you are done with selecting TWAIN Source. After selecting TWAIN Source, select
[TWAIN Acquire*] and the following window will appear. Here is the function of each icon.
D e l e t e
This button will erase the selected image.
R o t a t e
This button will rotate the image to proper orientation
R e f r e s h
This button will display the image stored in memory card
L o c k
This button will set the unlocked image into [locked]
U n l o c k
This button will set the locked image into [unlocked]
A c q u i r e
This button will download the image to editing program
P r o p e r t i e s
This button will specify the features of the image
This is the name of
the file saved on the
memory card.
HOW TO USE TWAIN DRIVER
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ92
9 5
HOW TO USE
EDITING SOFTWA R E
£π
Storing and Sending Images
You can store or alter the image format in PDF/ GIF/ JPEG. Once
you have downloaded your images you can also save them as a
background image for Windows.
£π
P r i n t i n g
Various print forms are available such as several prints on one
page and t-shirt prints which are reversed and when printed on
special t-shirt paper can be ironed onto a t-shirt.
¢Ú
Greetings cards etc
¢—
After downloading images you can make cards, calendars, albums, signs, certificates
e t c .
£π
C a r d
By using the opened images, you can make hello card , sports
card and several kinds of cards.
£π
C a l e n d a r
Make your own calendar using your own images
£π
Certificate Pages
With Adobe Photo Deluxe 3.0 you can make albums, albums
covers, certificates and letters with photos.
9 4
HOW TO USE
EDITING SOFTWA R E
¢Ú
Opening and editing pictures
¢—
You can download pictures from various imaging products to Adobe Photo Deluxe 3.0.
This will allow you to edit, store and print your pictures.
H o w to use Adobe Photo Deluxe 3.0
£π
Calling pictures
Adobe Photo Deluxe 3.0 can call the images shot by a camera,
pictures stored in a PC, images of a scanner , the pictures
downloaded from internet, several images and so on.
£π
Rotating and Resizing your photos
Adobe Photo Deluxe 3.0 allows you to rotate, flip or adjust the size
of your images.
£π
Quality Control
The colour and brightness of your images can be adjusted. You
can even change your images into black and white.
£π
Image Adjustment
The following imaging corrections are possible using Adobe Photo
Deluxe 3.0.
deleting red eye, removal of dust/scratches, changes to ones face.
£π
Special Effects
You can use the special effect function to liven up your images.
Special features include; text adding, perspective, negative,neon
effect, outline effect, collage etc.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ94
9 7
HOW TO USE
EDITING SOFTWA R E
£π
Obtaining the things that is possible to connect
You can obtain several pictures, clip art templet through internet
gallery provided in Adobe PhotoDeluxe.
£π
Adobe Activities
You can obtain all the informations that can be connected through
Adobe except for season’s activity information.
£πExtensis Activities
You can obtain all the other activity information possible to extend.
¢Ú
Advanced Settings
¢—
From the Adobe internet page you can download all of
the advanced settings.
°ÿ
If you ever want to edit pictures or personalise the picture you will now be able to
select the advanced menu. Click the higher menu button
R e fe r e n c e
°§
Click Help and then contents on the file menu for more details about each
function. Help will then be displayed.
9 6
HOW TO USE
EDITING SOFTWA R E
£π
L a b e l
Several kinds of labels and gift tags can be made using Adobe
Photo Deluxe 3.0.
£π
F r a m e s
The photo frames function can be used to frame photos or as a
frame in the T-shirt transfer.
£πP h o t o P a r a d e
You can make and execute PotoParade. And you can also obtain
a detail information about Photoparade.
£π
Storage and Sending
This is exactly the same as in the [storing and sending] function in
[Opening and Editing Pictures]
£π
P r i n t
This is same with [print] function of [opening and editing pictures]
¢Ú
Things that is possibe to connect
¢—
You can connect into the world of a additional contents by world wide web. Here are
images, letter forms, clip art, templet, plug-in for special effects and Photo Deluxe
background design. And You can download service and product by visiting other web
site related with PhotoDeluxe 3.0 and can use more links on screen.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ96
9 9
HOW TO USE
EDITING SOFTWA R E
¢Ú
Familarisation of Functions
£π
E n l a r g e m e n t
The images are enlarged by at least 16 times.
£π
R e d u c t i o n
The images are reduced by at least 16 times
£π
Z o o m
The chosen part of the picture is enlarged
The number of images stored in the
camera will be displayed on the
m o n i t o r .
4
Select the image that you want and click
on it . The camera will then download
that image.
5
9 8
HOW TO USE
EDITING SOFTWA R E
R e t ri e ving Images from the Digimax 210SE
Select [opening and editing pictures],
then click download pictures from the
c a m e r a .
1
If the following screen is displayed click (1. Camera)
2
You will have to either select
- USB : Samsung Digimax 210SE USB.
- RS-232C : Samsung Digimax 210SE Serial
Then click [opening the camera]
3
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ98
1 0 1
HOW TO USE
EDITING SOFTWA R E
¢Ú
Alternative Storing Methods
?
Select [opening and editing picture] then
storing and sending and then store.
.
S t o ring images in Adobe Photo Deluxe 3.0
N o t e
°§
Photo Deluxe converts all images to its native file format, which is PDD or
PBD, and save them. If you want to save in other formats, choose [File®A
E x p o r t®AFile Format] and select your format from the Save As drop-down
l i s t .
°§
When editing images, please ensure to save it as a new file under a new
name. If this procedure is not followed, you may lose the original images.
Otherwise, the original images will be distorted.
If you wish to download pictures and store them
onto a hard disk etc. the click on [file: store]
1
After choosing a file name on the display
screen click on the store button.
2
1 0 0
HOW TO USE
EDITING SOFTWA R E
-
Enlargement rate
Select the arrow and select the enlargement rate.
-
Waste Box
A selected portion of the picture is deleted
-
Object Order
You will be able to move objects to the front or back after selecting
the object order menu.
-
Text tools
This gives the option to add text
- Help
Click help when it appears on the online menu list.
-
C a n c e l
This will undo the latest command function
R e fe r e n c e
°§
Click (Help Contents) on the file menu for further instructions on the use of
the functions of Adobe Photo Deluxe 3.0
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ100
1 0 31 0 2
HOW TO REMOVE THE DRIVER AND
PROGRAM HOW TO REMOVE THE DRIVER AND
PROGRAM
R e fe r e n c e
Do as follows in case Inf folder inside Windows folder is not displayed.
Select [seeing->folder option] on
the file menu like the next picture.
Select [tools->folder option] in
case of Windows 2000.
1
Press the confirmation button after
selecting [hiding files] as [all the
files are displayed] on the seeing
of the folder option.
Press the confirmation button after
selecting [hiding files and folder
display] as [hiding files and folder
display] on the seeing of the folder
option in case of Windows 2000.
2
The elimination of USB TWAIN Driver is completed when you eliminate [Samsung
TechwinCOACH.INF] in [Other] folders.
In case of Windows 2000, you can eliminate [oem*.inf/oem*.pnf] in [Inf] folder. Eliminate
the file named "Samsung Digimax 210SE Camera" after opening the file named
[ o e m * . i n f ] .
4
How to remove the USB TWAIN Driver
Click in order [start menu->setting->controller->system]. Select [Samsung Digimax
210SE Camera] on [Imaging Device] in [system registration information->Device
Manager], and then click [elimination] then the frame below is displayed.
1
Press the [confirmation] button on the frame above.
2
Click in order [My computer ->(C:) -> Windows->Inf->Others] on the background frame.
3
¢ÚRefer to the below if you want to eliminate the Driver and Direct Download
program which are already set up.
°Ê °Ê °Ê °Ê
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ102
1 0 51 0 4
HOW TO REMOVE THE DRIVER AND
PROGRAM HOW TO REMOVE THE DRIVER AND
PROGRAM
How to remove the Direct Download_USB program.
When you select [program addition/elimination] icon on the control board, the frame
below is displayed.
1
After selecting °’D i r e c t D o w n _ U S B °pon the frame above and pressing
[addition/elimination], and then Direct Download_USB is automatically eliminated.
2
How to remove the Serial TWAIN Driver
When you select [program addition/elimination] icon on the control board, the frame
below is displayed.
1
After selecting [Samsung Digimax 210SE TWAIN Driver] on the frame above and
pressing [addition/elimination], and then Serial TWAIN Driver is automatically
e l i m i n a t e d .
2
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ104
1 0 7
H OW TO SOLVE THE PROBLEMS
¢Ú
Expected problems
You will see the frame below in the image-editing program, [Adobe PhotoDeluxe]
when TWAIN Driver doesn’t operate normally.
1.
The problems can occur when you first start the program after the first installation of
TWAIN Driver or when you had selected another TWAIN driver before.
¢—
Click the OK button and follow Step 1 through 4 on the next page. Walk them
through and check if they work. If this doesn’t work out, refer to the page 85 and
start TWAIN Driver again.
2.
When the program, which has operated normally, doesn’t operate any more
¢—
Follow Step 1 and 2 on the next page and check out if each of them works. If this
doesn’t work out, click the Ok button and then, click Open Camera icon.
3.
When the problem occurs when this program is in process
¢—
Follow Step 3 on the next page and check out if this works.
If this doesn't work out, click the OK button and then, click Open Camera icon.
1 0 6
HOW TO REMOVE THE DRIVER AND
PROGRAM
How to remove the Direct Download_Serial program.
When you select [program addition/elimination] icon on the control board, the frame
below is displayed.
1
After selecting °’D i r e c t D o w n _ S e r i a l °pon the frame above and pressing
[addition/elimination], and then °’Direct Download_Serial°pis automatically eliminated.
2
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ106
1 0 9
SET UP THE TWAIN DRIVER (FOR MAC)
T WAIN Dri ver Installation for Macintosh
Shut down all the programs before starting the installation.
1
Insert Driver CD-ROM into CD-ROM driver.
2
There are three categories in the installation of MAC TWAIN Driver.
°§
Installation for TWAIN Protocol (You can skip this if your Mac already has this
i n s t a l l e d . )
°§
Installation of Digimax 210SE USB TWAIN Driver
°§
Installation of Digimax 210SE Serial TWAIN Driver
3
Installation for TWAIN Protocol
If your MAC already has [TWAIN Protocol] installed, you may skip this instruction.
1
You see this window when you open [MAC TWAIN
Installer] folder from Driver CD-ROM.
2
Select all the files and folders in [Into
Extentions] Folder and then, copy them into
Extentions(extension file)Folder, which is in
System Folder(korean system).
3
In the same way, select all the files and folders in [Into Preferences]
Folder and then, move them into Preferences Folder, which is in
System Folder.
4
If all process goes successfully , reboot the computer.
5
1 0 8
H OW TO SOLVE THE PROBLEMS
¢Ú
Check points & Solutions
1. When
TWAIN Driver is set up improperly
These problems may occur when TWAIN Driver is set up improperly or TWAIN Driver
has been already set up for another camera.
¢—
Select the proper camera model on the following frame displayed when you run the
Adobe PhotoDeluxe testing version and then click [open the image and correct it ->
take the image -> camera -> 1. camera -> camera model] in this order.
2 .
When the connection between camera and PC is not proper.
¢—
You will have the problems when USB cable (or RS-232C cable) is not connected
from camera to PC or you have connected another cable other than the one
provided with this camera.
3.
When camera is turned off
¢—
The problems may occur when the camera is turned off or the battery doesn’t have
sufficient power or the adapter is not properly connected.
4.
Other than possible reasons listed above, there may be some other Review the
system information in reasons.
There may be some problems with Serial port on PC. Control panel to check out the
status of serial port. You will see the question mark with yellow background if there is
something wrong with serial port.
¢—
For more information, call A/S Center of PC manufacturer.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ108
1 1 1
SETTING UP THE DIRECT DOW N L OAD FOR
M AC I N T OSH USERS
1 1 0
If all process goes successfully, reboot the computer.
5
SET UP THE TWAIN DRIVER (FOR MAC)
USB TWAIN Dri v er Installation for Macintosh
To install USB TWAIN Driver, TWAIN Protocol is required. Refer to the page in (109 )
for information regarding TWAIN Protocol installation.
1
You see the frame below when you open [MAC USB TWAIN ]
folder from Driver CD-ROM.
2
Select [Samsung Digimax 210SE USB] file in [MAC USB
TWAIN ] folder and copy it into [TWAIN Data Sources] folder in
[Extentions] folder.
3
Select [SSA USB Camera Driver] file in [MAC USB TWAIN ] folder and copy it into
[Extentions] folder, which is in System folder.
4
S e rial TWAIN Dri v er Installation for Macintosh
To install Serial TWAIN Driver, TWAIN Protocol is required. Refer to the page in (109)
for information regarding TWAIN Protocol installation.
1
You see the frame below when you open [MAC Serial TWAIN]
folder from Driver CD-ROM.
2
Select [Samsung Digimax 210SE Serial] file in [MAC Serial
TWAIN] folder and copy it into [TWAIN Data Sources] folder
in [Extentions] folder.
3
If all process goes successfully, the installation is completed.
4
°·
Setting up the Direct Download for Macintosh users is same either when you use a USB
connecting terminal or when you use a communication connecting terminal.
Setting up the Direct Download for Macintosh users
When you use USB connecting terminal
Copy the file "DirectDown USB" from the Driver set up CD-ROM which is provided
with the Samsung Digimax 210SE digital camera to the hard disk of the Macintosh.
1
When you use communication connecting terminal
Copy the file "DirectDown Serial" from the Driver set up CD-ROM which is provided
with the Samsung Digimax 210SE digital camera to the hard disk of the Macintosh
2
®x
®x
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ110
1 1 31 1 2
°·
Digimax 210SE USB TWAIN Driver for MAC, was designed for USB port only.
Therefore, it requires built-in USB port with built-in Mac hard disk or keyboard.
°·
Digimax 210SE Serial TWAIN Driver for MAC was designed for Modem port only.
(not for printer port)
Connecting Macintosh USB connecting point
Connecting Macintosh communications connecting jack for Macintosh
Connect the USB cable to the USB port on the
c o m p u t e r .
1
Connect the other end of the USB cable to the
USB port of the camera.
2
Switch the camera on.
4
Set the mode dial.
3
After connecting the adapter for Macintosh to
the RS-232C cable, connect the adapter for
Macintosh with the to the modem port.
1
Connect the one end of the connected cable
terminal to the DIGITAL connecting terminal of the
c a m e r a .
2
Switch the camera on.
4
Set the mode dial.
3
CONNECT THE CAMERA H OW TO USE DIRECT DOW N L OA D
P RO G R A M
How to run the Direct Download for the Macintosh users
Plug in the exclusive cable (USB cable or Serial Cable) to the USB port of the
Macintosh or to the terminal of the camera. Refer to the page 112 about connecting
the cable.
1
Please ( ) the mode dial and turn the power on.
2
Open the folder "DirectDown_USB" or "DirectDown_Serial" and run the
DirectDown program in the folder.
3
<When you use a USB connecting terminal> <When you use a communication
connecting terminal>
The following frame is displayed when the program is normally run.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ112
1 1 5
H OW TO USE TWAIN DRIVER
1 1 4
H OW TO USE DIRECT DOW N L OA D
P RO G R A M
How to use Direct Download for the Macintosh users
You can download the files selected directly from the Image List and also select and
download the files classified from the Image Group with Direct Download program.
The functions of the each Direct Download program is like following:
This is the list of the files saved in the memory card.
You can select the files in the list using the mouse and you can
easily select the stereo file
pressing the Shift Key or Command Key on the keyboard.
Double click the marked files with
the mouse or press the Download
button in order to download the
selected files.
Check button of the Image Group
should not be marked like the next
p i c t u r e .
Select this when you want to download the images saved in the
memory card according to the
classified files.
When you select the files using the
Image Group, select the files you
want after you check the Image
Group. After that, press the
download button.
Select the folder the downloaded images should be saved.
It is the beginning menu folder with DirectDown that should be
used in downloading.
Download the taken images in the selected folder.
S e c t i o n
Image List
Image Group
Select Folder
Download
F u n c t i o n
H o w to use TWAIN Dri ve r
TWAIN Driver is not used dependently. It is called only by other graphic programs and
operates only in other programs. Thus this will explain the graphic program that is the
most generally used.
Of course the basic usage is as same as other programs that support TWAIN. First,
select the TWAIN source you want. Basically there should be the menu “TWAIN Select
Source” and “TWAIN Acquire” in all programs that support TWAIN. The presence of
these two menu decide whether it supports TWAIN or not. After this confirmation, you can
select the TWAIN Source you want. If you are using image device such as scanner, there
can be more than one TWAIN Source. In this case, if you are using digital camera, select
the digital camera Source.
If you select
°ATWAIN Select Source°B
, it displays dialog like picture above.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ114
1 1 71 1 6
H OW TO SOLVE THE PRO B L E M SH OW TO USE TWAIN DRIVER
Select [Samsung Digimax210SE Serial ] if your computer Communications connecting
jack for Macintosh, or select [Samsung Digimax210SE USB ] if your computer has USB
connecting jack. Then, the selection of TWAIN Source for this camera is completed.
This will specify the information of the selected image.
(image size, file format, lock/unlock, file size)
This will erase the image.
This will erase all the images stored in camera.
This will cancel TWAIN Acquire instruction.
This will bring the image from the camera to the program.
This will enable you to search for the images.
(via First ,Up , Down , Last )
S e a r c h i n g
i m a g e
Type 1. The memory is not enough or the memory is abnormal.
¢—
End the program you are using and run the program again.
Begin the Mac again if you need.
Type 2. This the error that happens when you first set up the USB port or
communication port.
¢—
You cannot use the Samsung Digimax 210SE TWAIN Driver in the several
programs at the same time. Thus, end the program you are using when it is
being used in other programs. You cannot use the Samsung Digimas 210SE
Tool Driver in the several programs at the same time when you use USB
port. Run the application program again if the DirectDown is running.
Begin the Mac again if you need.
Solutions for Macintosh-based Programs
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ116
1 1 91 1 8
H OW TO SOLVE THE PRO B L E M S H OW TO SOLVE THE PRO B L E M S
Type 3. This is the error that happens when you cannot take the Thumbnail
Image though the initiating setup of USB or communication port is
already done.
¢—
Check whether there is the memory card in Samsung Digimax 210SE
Camera or check if the camera mode is on the PC mode.
You should run the application program again after ending it.
Type 4. This is the error that happens when you cannot take the Image though
the initiating setup of USB or communication port is already done.
¢—
Check the power on/off or check whether there is the memory card in
Samsung Digimax 210SE Camera or check if the camera mode is on the PC
mode. You should run the application program again after ending it.
Type 5. This is the error that happens when you erase the image though all the
beginning set up is done.
¢—
Check if the image is locked.
If you want to erase the locked images, you should erase them after you
cancel the Lock.
Type 6. This is the error that happens when the unexpected error happens in
TWAIN data source. If it happens repeatedly, ask to where you bought
this or to the Samsung Camera service center.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ118