Hanwha Techwin DIGIMAXI5 Digital Camera User Manual sl1en c v09 1

Download:
Mirror Download [FCC.gov]
Document ID	545630
Application ID	+jLA1iMoC4qCx1G23PVt8Q==
Document Description	Users Manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	222.49kB (2781078 bits)
Date Submitted	2005-05-25 00:00:00
Date Available	2005-05-25 00:00:00
Creation Date	2005-05-24 16:15:44
Producing Software	Acrobat Distiller 5.0.2 (Macintosh)
Document Lastmod	2005-05-24 16:16:03
Document Title	sl1en_c_v09-1
Document Creator	QuarkXPress(MAC): LaserWriter 8 8.3fc2
Document Author:	samyoung

User’s Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images,
downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
■ Use this camera in the following order
Set up the
camera driver
Before connecting the camera to a PC, via the USB
cable, you will need to set up the camera driver.
Install the camera driver that is contained in
Application software CD-ROM. (p.117)
Take a picture. (p.24)
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection terminal.
(p.127)
Check the camera’s power. If the power is turned off,
press the camera button to turn it on. (p.31)
Open Window’s EXPLORER and search for
[Removable Disk]. (p.128)
● If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
《2》
Contents
READY
●Getting to know your camera
●Danger
●Warning
●Caution
●An FCC warning
●System chart
●Identification of features
■Front & Top
■Back & Bottom
■Side/ 5-function button
■Cradle
■Self-timer lamp
■Camera Status Lamp
■Mode icon
●Connecting to a Power Source
■Using the SAC-41
■Using the batteries
■Removing the battery
●Instructions on how to use the
memory card
●Inserting the memory card
●Removing the memory card
●When Using the Camera for the First Time
10
10
10
11
11
12
12
12
13
14
18
18
19
21
21
22
RECORDING
●LCD monitor indicator
●Changing the recording mode
■Selecting the [Mode] menu
■How to use the Auto mode
■How to use the Movie clip mode
■Recording the movie clip without voice
■Using Successive Recording
■How to use the Manual mode
■How to use the Scene modes
■How to use the VOICE RECORDING
mode
23
24
24
26
26
27
27
27
28
29
■How to use the SF mode
29
●Things to Watch Out for When Taking
Pictures
30
●Using the camera buttons to adjust the
31
camera
■POWER button
31
■SHUTTER button
31
●ZOOM W/T button
31
34
●Voice recording/ Voice memo/ UP button
●Macro/ Down button
35
●Focus lock
36
●Flash/ Left button
37
●Self-timer/ Right button
39
40
●MENU/ OK button
●M (Mode) button
40
●SF button
42
●+/- button
43
●Using the LCD monitor to adjust the camera
47
settings
●How to use the menu
49
49
●Mode
●Mode Set
50
●Size
51
●Quality / Frame rate
52
●Metering
53
●Continuous shot
53
●Sharpness
54
●OSD information
54
●Effect
55
●Special Effect
56
●Special Effect : Preset focus frames
56
●Special Effect : Composite shooting
58
●Special Effect : Photo Frame
60
●Movie Clip frame stabiliser
61
PLAY
●Starting play mode
■Playing back a still image
62
62
《3》
Contents
■Playing back a movie clip
63
■How to capture the movie clip
63
■On camera movie trimming
64
65
■Playing back a recorded voice
●LCD monitor indicator
66
●Using the camera buttons to adjust the
camera
67
■Play mode button
67
68
●Thumbnail/ Enlargement button
●Voice memo/ Up button
69
●Play & Pause/ Down button
70
●Delete button
71
●Left / Right / Menu / OK button
72
73
●Album button
●Setting up the play back function using the
LCD monitor
76
●Starting the slide show
79
●Protecting images
81
82
●Deleting images
●Resize
83
84
●Rotating an image
●Effect
85
●DPOF
85
●DPOF : Standard
86
●DPOF : Index
86
●DPOF : Print size
87
●Copy To Card
88
●PictBridge
89
●PictBridge : Picture Selection
90
●PictBridge : Print Setting
91
●PictBridge : Printing
92
●PictBridge : RESET
93
SETUP
●Setup menu
●File name
●Auto power off
●Language
《4》
94
95
96
97
●Formatting a memory card
●Setting up the Date/ Time/ Date type
●Imprinting the recording date
●Sound
●Connecting an External Device (USB)
●Auto Focus lamp
●LCD brightness
●Selecting Video out type
●Quick view
●Initialisation
●Setting up the Mycam menu
●Start up image
●Start up sound
●Shutter sound
●Important notes
●Warning indicator
●Before contacting a service centre
●Specifications
97
98
98
99
99
100
100
101
103
103
104
104
105
105
106
108
109
112
SOFTWARE
●Software Notes
●System Requirements
●About the software
●Setting up the application software
●Starting PC mode
●Removing the USB Driver for Windows
98SE
●Removable Disk
●Removing the removable disk
●Setting up the USB Driver for MAC
●Using the USB Driver for MAC
●Digimax Viewer 2.1
●Digimax Reader
●Using PhotoImpression
●FAQ
114
114
115
117
127
130
131
132
133
133
134
135
137
139
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
● Prior to using this camera, please read the user manual thoroughly.
● When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Batteries, Memory card etc.) to the A/S centre.
● Please check that the camera is operating properly prior to when you intend to use it (e.g. for
a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
● Keep the manual in a safe place.
Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
All brand and product names appearing in this manual are registered trademarks of their
respective companies.
This manual contains instructions on using this camera that will help you to use this
camera safely and correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided,
may result in a minor or moderate injury.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
《5》
Information to the user
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Danger
■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service centre.
■ Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
■ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source. You must contact your dealer or Samsung
Camera Service centre. Do not continue to use the camera as this may cause a fire or
electric shock.
■ Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber. This may cause a fire or electric
shock.
■ Do not operate this camera with wet hands. This could pose a risk of electric shock.
Warning
■ Do not use the flash in close proximity to people or animals. Positioning the flash too close to
your subject’s eyes, may cause eyesight damage.
■ For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
•Swallowing batteries or small camera accessories. If an accident should occur, please
consult a doctor immediately.
•There is the possibility of injury from the camera’s moving parts.
■ Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
■ Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to
extreme temperatures may adversely affect the camera’s internal components and could
cause a fire.
■ When in use, do not cover the camera or AC Charger. This may cause heat to build up and
distort the camera body or cause a fire. Always use the camera and its accessories in a wellventilated area.
《6》
Caution
■ Leaking, overheating, or burst batteries could result in fire or injury.
•Use batteries with the correct specification for the camera.
•Do not short circuit, heat or dispose of batteries in fire.
•Do not insert the batteries with the reverse polarities.
■ Remove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and permanently damage the camera's components.
■ Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
■ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
■ Take care not to touch the lens and where the lens cover is to avoid taking an unclear image
and possibly causing camera malfunction.
■ Avoid obstructing the lens or the flash when you capture an image.
An FCC warning
•This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication. There is however, no guarantee that interference will not occur in
some situations. Should any interference occur when this device is in operation,
please try one or more of the following measures.
■ Change the location and direction of any aerial.
■ Increase distance between the camera and the affected device.
■ Use a different socket away from the affected device.
■ Please contact a Samsung agent or a radio/TV engineer.
•This device complies with part 15 of the FCC Rules.
•Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
《7》
System chart
Please check that you have the correct contents before using this product. The contents can
vary depending on the sales region. To buy the optional equipment, contact your nearest
Samsung dealer or Samsung service centre.
< Included items >
Pouch
DPOF compatible
printer (see p.85)
AC cord
AC cord
User manual,
Product warranty
Camera strap
Software CD
(see p.115,116)
SD memory card
(see p.19)
Charger (SBC-L5)
SAC-41
Rechargeable battery
(SLB-0737)
Cradle
※ The charger (SBC-L5), AC charger (SAC-41) or Cradle is optional depending on the sales region.
《8》
System chart
System Requirements
For Windows
Computer
PictBridge compatible
printer(see p.89)
•PC with processor better than MMX Pentium
233MHz (XP : Pentium II 300MHz)
•Windows 98/98SE/2000/ME/XP
•Minimum 32MB RAM (XP : 128MB)
•140MB of available hard-disk space
•USB port
•CD-ROM drive
•800x600 pixels, 16-bit colour display
compatible monitor
(24-bit colour display recommended)
For Macintosh
USB cable
•Power Mac G3 or later
•Mac OS 9.2 ~ 10.3
•Minimum 64MB RAM
•110MB of available hard-disk space
•USB port
•CD-ROM drive
•QuickTime player
•DivX(for movie clip)
AV cable
CAUTION
When you connect the camera to a
computer, printer or external monitor, you
have to use the USB/ AV cable supplied
with the camera, or the external devices
can't recognise the camera.
External monitor
Yellow colour - Video
White colour - Voice
(see p.101)
《9》
Identification of features
Front & Top
SF mode button
Shutter button
Microphone
Power button
Flash
Speaker
Self-timer lamp/
Auto Focus lamp
Optical 3X zoom lens/
Lens cover
Sticker
※ To grip the camera
safely, put the sticker on
the front of the camera.
※ Take care not to press the lens, lens cover and camera by force. This may cause the camera
malfunction.
Back & Bottom
Zoom W button
(Thumbnail)
M(Mode/Album) button
Zoom T button
(Digital zoom)
Camera status
lamp
Play mode button
LCD monitor
Strap eyelet
5 function button
DC/USB/AV connection terminal
Cradle connector
《10》
+/-, DELETE button
Identification of features
Side / 5-function button
Memory card slot
Voice memo/ Voice recording/ UP button
MENU/ OK
button
SELF-TIMER/
RIGHT button
FLASH/
LEFT button
Battery chamber
Battery holder
Battery chamber cover
Macro / DOWN button
Play & Pause button
Cradle
■ You can recharge your rechargeable battery, transfer a captured image to print, and
download images with the cradle. (Refer to page 15, 89 and 127)
● Top
Camera
connection
terminal
● Back
DC connection
terminal
USB port
AV connection
terminal
《11》
Identification of features
■ Self-timer lamp
Icon
Status
Description
Blinking
For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
Blinking
For the final 2 seconds, the lamp blinks quickly at 0.25-second
For the first 8 seconds, the lamp blinks at 1 second intervals.
intervals.
A picture will be taken after about 10 seconds and 2 seconds later a
Blinking
second picture will be taken.
■ Camera Status Lamp
Status
Description
The lamp turns on and off when the camera is ready to
Power on
take a picture
The lamp blinks while saving the image data and turns
After taking a picture
off when the camera is ready to take a picture
When the USB cable is inserted to
a PC
The lamp lights up (LCD monitor turns off after initializing
the device)
Transmitting Data with a PC
The lamp blinks (LCD monitor turns off)
When the USB cable is inserted to
a printer
The lamp lights up
When the printer is printing
The lamp blinks
■ Mode icon : Refer to page 40, 41 for more information about the camera mode setting.
MODE
MOVIE CLIP VOICE RECORDING
AUTO
MANUAL
SF
PLAY
Icon
SCENE
MODE
NIGHT
PORTRAIT
CHILDREN LANDSCAPE CLOSE UP
TEXT
SUNSET
DAWN
BACKLIGHT FIREWORKS BEACH&SNOW
Icon
MODE
Icon
《12》
Connecting to a Power Source
■ You should use the rechargeable battery (SLB-0737) supplied with the camera.
Be sure to charge the battery before using the camera.
■ SLB-0737 rechargeable battery Specification
Model
SLB-0737
Type
Lithium Ion
Capacity
760mAh
Voltage
3.7V
Charging time
Approx. 150 MIN (Using the SAC-41)
■ Number of images and battery life
Still image
Movie
Battery life
Number of images
Recording time
Approx. 70 MIN
Approx. 140
Approx. 70 MIN
Shooting
conditions
Using the fully charged battery
Auto mode, 5M image size
Fine image quality,
Shot to shot interval : 30Sec.
Changing the zoom position
between the Wide and the Tele
ends every 1 shot.
Using the flash every two times.
The power turns off every ten
shots
Using the fully charged battery
640X480 image size
30fps frame rate
Shooting
conditions
※ These figures are measured under Samsung’s standard conditions and Shooting conditions
and may vary depending on the way of user’s usage.
INFORMATION
Important information about battery usage
● When the camera is not used, turn off the camera power.
● Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
● Low temperatures (below 0˚C) can affect the performance of the batteries and you may
experience reduced battery life.
● Batteries will usually recover at normal temperatures.
● During extended use of the camera, the camera body may become warm.
This is perfectly normal.
《13》
Connecting to a Power Source
Using the SAC-41
If you have access to a mains supply, using an SAC-41 allows the camera to be used for long
periods of time.
Plug the SAC-41 into the DC connection terminal on the camera or cradle.
Before turning on the camera power with an SAC-41, insert the rechargeable battery that was
charged for over 10 minutes with turning off the camera.
DANGER
● Always turn off the power before taking the SAC-41 out of the mains supply.
● As with all mains powered devices, safety is important. Ensure that neither the camera
nor Charger comes into contact with water or metallic materials.
● Please ensure that you use the SAC-41 with the correct specification for the camera.
Failure to do so may affect your warranty.
■ How to charge the rechargeable battery (SLB-0737) with the SAC-41.
● Charging with the cradle
1. Insert the rechargeable battery into the battery
chamber.
2. Place the camera correctly in the
cradle.
3. Put the SAC-41 into your power socket
and DC connection terminal of the cradle.
Charging LED
《14》
Connecting to a Power Source
■ How to charge the rechargeable battery (SLB-0737) with the SAC-41.
● Charging with the camera
1. Insert the rechargeable battery into the battery
chamber.
2. Put the SAC-41 into your power socket and
DC connection terminal of the camera.
Charging LED
■ Important information about battery (SLB-0737) charging with the SAC-41
● If the charging LED of the SAC-41 does not
turn on or blink after inserting the rechargeable
battery, please check whether the batteries
are inserted correctly.
● Please check the battery charging status with
the charging LED of SAC-41.
Charging LED
※ If you connect the SAC-41 to camera without inserting the rechargeable battery, the charging
LED will brink or be off. In this case, insert the battery and connect the SAC-41 again.
《15》
Connecting to a Power Source
■ Charging LED of the SAC-41
Status
Using the cradle
Direct to the camera
Being Charged
Red LED is on
Red LED is on
Charging is complete
Green LED is on
Green LED is on
Charging error
Red LED is off or blinking
Red LED is off or blinking
● If there is a charging error, please check all the power connections are in place.
● A USB cable for transmitting data can’t be used for charging the rechargeable battery.
■ Charging time (When the camera is turned off)
- Using the cradle : About 150MIN
- Using the SAC-41 : About 150MIN
INFORMATION
Important information about the rechargeable battery.
● If you charge the battery with the camera power on, the battery can't charge fully.
To charge the battery fully, turn the camera off when you charge it.
● If you insert the fully discharged battery to charge it, do not turn on the camera at the
same time. The camera may not be turned on because of the low battery capacity.
Charge the battery for over 10 minutes to use the camera.
● Do not use the flash frequently or take a movie clip with the fully discharged battery
charged for a short time. Even if the charger is inserted, the camera power may be turned
off because the rechargeable battery is discharged again.
《16》
Connecting to a Power Source
■ How to charge the rechargeable battery (SLB-0737) with the SBC-L5.
1. Insert the AC cord into the charger.
2. Plug the AC cord's power plug into the
wall outlet.
3. Place the (-) and (+) terminals of the battery in the
correct position. The red charge indicator indicates
normal charging.
4. When charging is complete, the indicator turns green.
■ Charging LED of the SBC-L5
Charging LED
Red LED is on
Red LED is blinking
Green LED is on
Status
Being charged
Charging error
Charging is complete
INFORMATION
●If the charge indicator blinks as red, it indicates a battery charging error.
- The battery is not properly inserted
- The terminals of battery are dirty or damaged
If the battery is inserted properly and the charge indicator continues to blink, contact the
nearest Samsung Camera Service Center.
● Refer to the user manual for more information about using the SBC-L5.
《17》
Connecting to a Power Source
Using the batteries
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
1. Open the battery chamber cover by pushing in
the direction of the arrow.
2. Insert the batteries taking note of the polarity
(+ / -).
3. To close the battery chamber cover, push it
until it clicks.
Removing the battery
1. Turn off the camera power.
Open the battery chamber cover and move the
battery holder aside. The battery will be released.
2. Take out the battery and close the battery
chamber cover.
INFORMATION
● When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
《18》
The batteries are fully
charged
Prepare new batteries
There is no battery capacity.
Replace with new batteries.
Instructions on how to use the memory card
● Be sure to format the memory card (see p.97) if you are using a newly purchased memory for
the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
● Turn off the camera power whenever the memory card is being inserted or removed.
● Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
● The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
● Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
● Please do not use or store in an environment where there are extremes in temperature.
● Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
● Please keep the memory card in its case when not in use.
● During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
● Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this camera.
● Do not use a memory card formatted by another digital camera or memory card reader.
● If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
● Samsung cannot be held responsible for lost data.
● It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
● If there is insufficient memory available
: A [Card Full!] message will appear and the camera will not operate. To optimise the amount
of memory in the camera, replace the memory card or delete unnecessary images stored
on the memory.
《19》
Instructions on how to use the memory card
INFORMATION
● Don't remove the memory card when the camera status lamp is blinking as this may
cause damage to data in the memory card.
■ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the
enclosed manual for using the MMC Cards.
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted. By sliding the switch to the bottom of
the SD memory card, the data will be protected.
By sliding the switch to the top of the SD memory
card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card
before taking a picture.
Card pins
Write
protect
switch
Label
[ SD (Secure Digital) memory card ]
■ When using a 50MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Recorded image size
Still
image
Movie
clip
《20》
S. Fine
Fine
Normal
30FPS
15FPS
5M(2592x1944)
11
21
33
4M(2272x1704)
14
26
40
3M(2048x1536)
17
33
50
2M(1600x1200)
30
51
75
1M(1024x768)
60
106
129
VGA(640x480)
121
165
202
640(640X480)
About 2MIN
About 4MIN
320(320X240)
About 4MIN
About 7MIN
160(160X128)
About 8MIN About 15MIN
Inserting the memory card
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
2. Have the front of the memory card facing toward the front
of the camera (lens) and the card pins toward the back of
the camera (LCD monitor), and then push the memory
card into the card slot until you hear a click.
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do
not attempt to insert it by force. Check the direction of
insertion, and then insert it correctly. Do not insert the
memory card the wrong way round. Doing so may
damage the memory card slot.
Removing the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
INFORMATION
● When the camera is turned on, inserting or removing the memory card turns the camera
power off.
《21》
When Using the Camera for the First Time
■ Charge the rechargeable battery fully before using the camera for the first time.
■ If the camera is turned on for the first time, a menu will be displayed to set date, time and
language in the LCD monitor. This menu will not be displayed after setting up the date, time
and language. Set up the date, time and language before using this camera.
● Setting up the date, time and date type
1. Select the [D & Time] menu by pressing the UP/DOWN
button and press the RIGHT button.
Setup
Date&Time ▲
2. Select the desired sub menu by pressing the UP/ DOWN/
Language 05/05/01 13:01
LEFT/ RIGHT button.
▼
yy/mm/dd
RIGHT button
: selects YEAR/ MONTH/ DAY/ HOUR
/ MINUTE/DATE TYPE
Back:◀
Set:OK
LEFT button
: Moves the cursor to the [Date&Time]
main menu if the cursor is at the first item of the date and time setup.
In all other instances, the cursor will be shifted to the left of its current
position.
UP/ DOWN button : changes the value of each item.
● Setting up the language
1. Select the [Language] menu by pressing the UP/DOWN
button and press the RIGHT button.
2. Select the desired sub menu by pressing the UP/ DOWN
button and press the OK button.
When the settings are complete, press the MENU button
twice to exit the menu screen.
Setup
Date&Time ENGLISH
Language 한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
Back:◀
Set:OK
INFORMATION
● You can select 18 languages. These are listed below
: English, Korean, French, German, Spanish, Italian, S. Chinese, T. Chinese, Japanese,
Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, BAHASA(MALAY/
INDONESIAN) and Arabic.
● Even if the camera is restarted, the language setting will be maintained.
《22》
LCD monitor indicator
■ The LCD monitor displays information about the shooting functions and selections.
⑳
38
①
⑲
②
⑱
③
⑰
④
⑯
⑤
⑮
⑥
⑭
⑦
⑬
⑧
⑫
⑨ ⑩
⑪
[Image & Full Status]
No.
Description
Recording mode
Icons
Page
p.50
Battery
p.18
Continuous shot
p.53
Flash
p.37
Self-timer
p.39
Macro
p.35
Metering
p.53
Card inserted indicator
Auto focus frame
10
Camera shake warning
p.30
11
Date/ Time
12
Exposure compensation
p.45
13
White Balance
p.44
14
ISO
p.44
2005/05/01 01:00 PM
p.98
《23》
LCD monitor indicator
15
RGB
16
Sharpness
p.54
17
Image quality
p.52
18
Image size
p.51
19
RGB
Number of available shots remaining
38
Remaining time (Movie clip/ Voice recording)
00:01:30/ 01:00:00
p.43
p.20
20
Voice memo/ Mic. off
p.34/27
21
Optical/ Digital Zoom bar/
Digital Zoom rate
p.32
Changing the recording mode
■ You can select the desired working mode by the M (Mode) button located on the back of the
camera and [Mode], [Mode set] menu. Auto, manual, movie clip, scene (night, portrait,
children, landscape, text recognition, close-up, sunset, dawn, backlight, fireworks, beach &
snow) camera modes are available.
■ Selecting the [Mode] menu
1. Insert the battery (p.18).
2. Insert the memory card (p.21). As this camera has a 50MB internal memory, you do not
need to insert the memory card. If the memory card is not inserted, an image will be stored
in the internal memory. If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
Mode
5. Press the menu button and a menu will display.
Still & Movie
Full
6. Use the UP/DOWN button to select the [Mode] menu.
7. Select [Still & Movie] or [Full] sub menu by pressing the
UP/DOWN button.
- [Still & Movie] : A still image mode that was selected
on the [Mode set] menu and movie clip mode can be selected.
Refer to page 50 for more information about using the [Mode set] menu.
- [Full]
: Auto, Manual, Movie clip and scene modes can be selected.
8. Press the MENU button and the menu will disappear.
《24》
Changing the recording mode
● Changing the recording mode : If the [Still & Movie] menu was selected
Steps from 1-4 are the same as those for selecting the [Mode] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the recording mode will
change to the movie clip mode.
7. Press the M (Mode) button again and a still image mode selected on the [Mode set] menu
will be selected.
00:03:39
38
Pressing the M (Mode) button
[AUTO mode]
[MOVIE CLIP mode]
● Changing the recording mode : If the [Full] menu was selected
Steps from 1-4 are the same as those for selecting the [Mode] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. To select the Auto, Manual, Movie clip or Scene modes, press the Left/Right button.
To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the
Up/Down button.
AUTO
Pressing the Left button
Movie
Set : OK/M
Set : OK/M
[Mode selection menu]
[Selecting the Movie clip mode]
Night
Pressing the Up button
Set : OK/M
[Selecting the Scene mode]
8. Press the M (Mode) button and the mode selection menu will disappear.
《25》
Starting the recording mode
■ How to use the Auto mode
Use this for shooting basic still images.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
2. Select the Auto mode by pressing the M (Mode) button
(p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
38
[AUTO mode]
INFORMATION
● If the auto focus frame turns to red when you press the shutter button down half way, it
means that the camera cannot focus on the subject. Should this be the case, the camera
is unable to capture an image clearly.
● Avoid obstructing the lens or the flash when you capture an image.
■ How to use the Movie clip mode
A movie clip can be recorded for as long as the available recording time of the memory
capacity allows.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
00:03:39
2. Select the Movie clip mode by pressing the M (Mode)
button (p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button once and movie clips are
recorded for as long as the available recording time
[MOVIE CLIP mode]
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press the shutter button again.
※ Image size and type are listed below.
- Image size
: 640X480, 320X240, 160X128 (user selectable)
- Movie clip file type : AVI (MPEG-4)
《26》
Starting the recording mode
■ Recording the movie clip without voice
You can record the movie clip without voice.
Steps from 1-3 are the same as those for MOVIE CLIP
mode.
4. Press the Up button and the (
) icon will display on
the LCD monitor.
5. Press the shutter button and movie clip is recorded for as
long as the available recording time without voice.
6. To stop the recording, press the shutter button again.
00:03:39
■ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while recording a movie
clip. Using this function, you can record your favourite scenes into a movie clip without having
to create multiple movie clips.
● Using Successive Recording
Steps from 1-2 are the same as those for MOVIE CLIP
00:02:00
mode.
3. Point the camera towards the subject and compose the
image by using the LCD monitor. Press the shutter
button and movie clips are recorded for as long as the
available recording time. Movie clips will still be recorded
if the shutter button is released.
[Successive recording of a movie clip]
4. Press the Pause button(
) to pause recording.
5. Press the Pause button(
) again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
■ How to use the Manual mode
Selecting the automatic mode will configure the camera with optimal settings.
You can still manually configure all functions except the aperture value and shutter speed.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
2. Select the Manual mode by pressing the M (Mode) button
(p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
38
[MANUAL mode]
《27》
Starting the recording mode
■ How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of shooting situations.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
2. Select the Scene mode by pressing the M (Mode) button
(p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
[SCENE mode]
※ The scene modes are listed below.
[Night](
: Use this for shooting still images at night or in other dark
conditions.
[Portrait](
[Children](
: To take a picture of a person.
[Landscape](
[Close up](
[Text](
: Scenery with green woods or blue sky.
: Close-up shooting for small objects such as plants and insects.
: Use this mode to shoot a document.
[Sunset](
[Dawn](
: To take a still picture of moving children.
: For taking pictures of sunsets.
: Daybreak scenes.
[Backlight](
: Portrait without shadows caused by backlight.
[Firework](
: Firework scenes.
[Beach & Snow](
《28》
) : For ocean, lake, beach and snowscape scenes.
38
Starting the recording mode
■ How to use the VOICE RECORDING mode
A voice recording can be recorded for as long as the available recording time of the memory
capacity allows. (Max: 1 hour)
1. In any mode with the exception of the Movie clip, select the
01:21:32
VOICE RECORDING mode by pressing the Voice
recording button twice.
2. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for as
long as the available recording time (Max : 1 hour) allows.
The recording time will be displayed on the LCD monitor.
[VOICE RECORDING mode]
Voice will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button
again.
- File type : WAV
INFORMATION
● A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
■ How to use the SF mode
In poor indoor light conditions, Safety Flash will help you get a good image without the use of
a flash. In every camera mode, the SF mode can be selected.
1. Press the SF mode button.
38
2. Press the shutter button to capture an image.
※ Refer to page 42 for more information about the
SF function.
[SF mode]
《29》
Things to Watch Out for When Taking Pictures
■ Pressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[ Lightly press the shutter button ]
[ Press the shutter button ]
■ The available recording time may vary depending on shooting conditions and camera
settings.
■ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, support the
camera on a solid surface or change the flash mode to flash shot mode.
■ Backlight compensated shots : When taking an outdoor shot, avoid facing the sun, as the
image may be dark because of the strong backlight.
To take a picture against the sun, please use the [Backlight] in
the scene shooting mode (see page 28), Fill-in flash
(see page 37), Spot metering (see page 53), or Exposure
compensation (see page 45).
■ Avoid obstructing the lens or the flash when you capture an image.
■ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark
《30》
Using the camera buttons to adjust the camera
■ The recording mode function can be set up by using the camera buttons.
POWER button
● Used for turning the camera’s power on / off.
● If there is no operation during the specified time, the
camera's power will be turned off automatically to save
battery life. Refer to page 96 for more information about the
auto power off function.
● Pressing the power button for over 3 seconds will
deactivate the start-up sound and sound function.
SHUTTER button
● Used for taking an image or recording voice in the
recording mode.
● In MOVIE CLIP mode
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and
the movie clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop
recording, press the shutter button again.
● In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of
the flash.
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after the camera has finished
storing the image data.
ZOOM W/ T button
● If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
《31》
ZOOM W/ T button
■ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a
total zoom ratio of 15X.
● TELE Zoom
Optical zoom TELE
Digital zoom TELE
: Pressing the ZOOM T button. This will zoom into the subject i.e.
the subject will appear nearer.
: When the maximum (3X) optical zoom is selected, pressing the
ZOOM T button activates the digital zoom software. Releasing
ZOOM T button stops the digital zooming at the required setting.
Once the maximum digital zoom (5X) is achieved, pressing the
ZOOM T button will have no effect.
38
[ WIDE zoom ]
● WIDE Zoom
Optical zoom WIDE
Digital zoom
Pressing the
ZOOM W button
38
Pressing the
ZOOM W button
[ Optical zoom 2X ]
38
[ WIDE zoom ]
: When the digital zoom is in operation, pressing the ZOOM W
button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce the digital zoom and
then it will continue to reduce the optical zoom until the minimum
setting is reached.
38
[ Digital zoom 5.0X ]
《32》
[ Digital zoom 5.0X ]
: Pressing the ZOOM W button. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the ZOOM W
button continuously will set the camera to its minimum zoom
setting i.e. the subject appears at its furthest from the camera.
[ TELE zoom ]
Optical zoom
38
Pressing the
ZOOM T button
[ TELE zoom ]
38
Digital zoom WIDE
38
Pressing the
ZOOM T button
Pressing the
ZOOM W button
38
[ TELE zoom ]
Pressing the
ZOOM W button
38
[ WIDE zoom ]
ZOOM W/ T button
INFORMATION
● Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
● The digital zoom cannot be used in movie clip shots.
● If the Zoom buttons are being pressed during the Movie clip shots, the voice will not
recorded.
● You may notice a decrease in image quality when using the digital zoom.
● To view more clear digital zoom image, press the shutter button halfway at the maximum
(3X) optical zoom position and press the zoom T button again.
● The digital zoom can’t be activated in the [Night], [Children], [Close up], [Text] and
[Fireworks] scene modes.
● Take care not to press the lens, lens cover and camera by force. This may cause the
camera malfunction.
《33》
Voice recording(
) / Voice memo(
) / UP button
■ While the menu is showing, press the UP button to move up the submenu cursor. When the
menu is not displayed on the LCD monitor, the UP button operates as the voice recording
) or voice memo (
) button. You can record your voice or add your voice-over to a
stored still image.Refer to page 29 for more information about the voice recording.
● Recording a voice memo
1. Press the M (Mode) button to select a Recording mode with the exception of Movie clip
mode.
2. Press the Voice memo (
) button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
38
38
Pressing the Voice memo button
3. Press the shutter button and take a picture.
The picture is stored on the memory.
4. Voice memo will be recorded for ten seconds from the
moment the picture is stored. In the middle of the voice
recording, pressing the shutter button will stop the voice
memo.
38
[Recording Voice Memo]
INFORMATION
● A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
《34》
Macro(
) / Down button
■ While the menu is showing, press the DOWN button to
move from the main menu to a submenu, or to move down
the submenu cursor. When the menu is not showing, you
can use the MACRO/ DOWN button to take macro pictures.
The distance ranges are shown below. Press the Macro
button until the desired macro mode indicator displays on
the LCD monitor.
38
[Auto macro (
38
[Auto focus - No icon]
38
)]
[Super macro (
38
)]
[Macro (
■ Types of focus modes and focus ranges (W: Wide, T: Tele)
Mode
Auto (
Focus Type
Auto macro (
Focus range
(Unit : cm)
Manual (
Super macro (
)]
Macro (
Normal
W : 5 ~ Infinity
W:1~5
W : 5 ~ 50
W : 5 ~ Infinity
T : 50 ~ Infinity
(Wide only)
T : 25 ~ 50
T : 50 ~ Infinity
※ See the next page for the available focusing method, by recording mode.
INFORMATION
● When the macro mode is selected, it is possible that camera shake will occur.
Take care not to shake the camera.
● When you take a picture within 30cm(MACRO focus), select the FLASH OFF mode.
● When you take a picture within 5cm, the AF may take a time to get exact focus range.
● The super macro is executed on the wide zoom position only.
《35》
Macro(
) / Down button (Focusing)
■ Available focusing method, by recording mode ( O: Selectable , X: Not selectable, ∞: Infinity focus range)
Mode
Auto macro
Super macro
macro
Normal
SCENE
Mode
Auto macro
Super macro
macro
Normal
∞
∞
∞
∞
Focus lock
■ To focus on the subject positioned outside of the centre, use the focus lock function.
● Using the Focus Lock
1. Ensure the subject in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means
the camera is focused on the subject. Be careful not to press the SHUTTER button all the
way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be cancelled.
38
1. The image to be captured.
《36》
38
2. Press the SHUTTER
button halfway and
focus on the subject.
38
3. Recompose the picture
and fully depress the
SHUTTER button.
Flash (
) / Left button
■ When the menu is displayed on the LCD monitor, pressing
the LEFT button makes the cursor shift to the left tab.
38
■ When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH (
) button.
● Selecting the flash mode
1. Press the M (Mode) button to select a Recording mode
[Selecting the Auto flash]
with the exception of Movie clip mode (p.25).
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit
the environment.
● Flash range
(Unit : m)
Auto
ISO
Auto
Macro
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.5 ~ 2.4
0.5 ~ 1.9
0.2 ~ 0.5
0.3 ~ 0.5
0.2 ~ 2.4
0.5 ~ 1.9
※ If the Super macro is selected, the flash is fixed as the Flash Off.
INFORMATION
● When the flash is charging, a flash mode icon (red colour) will blink on the LCD monitor.
● Using the flash frequently will reduce the life of the batteries.
● Under normal operating conditions the charging time for the flash is normally within
5seconds. If the batteries are weak, the charging time will be longer.
● During the continuous shot and movie clip mode, the flash function will not operate.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or highly reflective.
《37》
Flash (
) / Left button
● Flash mode indicator
Icon
Flash mode
Description
Auto flash
If the subject or background is dark, the camera flash will operate
automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to the
prevailing conditions. The brighter the background or subject is,
the less intense the flash will be.
Slow synchro
The flash will operate in conjunction with a slow shutter speed in
order to obtain the correct exposure. When you take an image in
a condition with poor light, the camera shake warning indicator
) will display on the LCD monitor.
Flash off
The flash does not fire. Select this mode when capturing images
in a place or situation where flash photography is prohibited.
When you capture an image in a poorly lit condition, the camera
shake warning indicator (
) will display on the LCD monitor.
● Available flash mode, by recording mode
《38》
Self-timer (
) / Right button
■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab. The right button can also be used to move to a sub menu to select a
different setting. When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer. This function is used when the photographer would also like to be
in the image.
● Using the self-timer
1. Press the M (Mode) button to select a still image mode or movie clip mode (p.25).
2. Press the Self-timer button until the desired mode indicator displays on the LCD monitor.
In Movie clip mode, only the 10 Sec. self-timer can be used.
- 2 Sec. Self-timer(
) : Pressing the shutter button will allow an interval of 2 seconds
before the image is taken.
- 10 Sec. Self-timer(
) : Pressing the shutter button will allow an interval of 10 seconds
before the image is taken.
- Double Self-timer(
) : A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken. When using the flash, the
2-second self-timer may be delayed for longer than 2 seconds
depending on the flash charge time.
38
38
[Pressing the Self-timer button]
[2 Sec. self-timer]
38
38
[Pressing the Self-timer]
[Double self-timer]
[10 Sec. self-timer]
3. When you press the Shutter button, the picture will be taken after the specified time has
elapsed.
※ If you operate the Power button and Self-timer button during the self-timer operation, the
self-timer function is cancelled.
《39》
MENU/ OK button
■ MENU button
- When you press the MENU button, a menu related to each camera mode will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE
RECORDING mode is selected.
38
ModeSet
Auto
Maunal
Movie
Night
portrait
Children
[Pressing the MENU button]
[Menu off]
[Menu on]
■ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor
to the sub menu or for confirming data.
M (Mode) button
■ You can turn on the camera with this button.
■ You can select the desired recording mode.
The selectable recording modes are different from what you selected sub menu in the
[Mode] menu.
- [Still & Movie] : A recording mode selected in the [Mode set] menu, Movie clip mode
- [Full]
: Auto, Movie clip, Manual, Scene modes
● How to use the mode button : In case of [Still & Movie] and [Auto] sub menu
00:03:39
38
[Pressing the M button]
[Auto mode]
《40》
[Movie clip mode]
M (Mode) button
● How to use the mode button : In case of [Full] sub menu and Auto mode
38
[Auto mode]
Pressing the
Mode button
Manual
[Pressing the Right button]
Set : OK/M
[Manual mode]
AUTO
Set : OK/M
[Mode selection menu]
Movie
[Pressing the Left button]
Set : OK/M
[Movie clip mode]
Pressing the Up button
Night
Portrait
[Pressing the Left/Right button]
Set : OK/M
Set : OK/M
[Scene mode]
[Selecting a scene mode]
※ Press the Mode button and the mode selection menu will disappear.
《41》
SF button
■ Pressing the SF button selects the SF(Safety Flash) mode
In poor indoor light conditions, Safety Flash will help you get a good image without the use of
a flash.
● Things to watch out for using the SF mode
1. If you select the SF in the 2048 or above image size, the captured image size is changed
to 1600.
2. The SF range is 2m(WIDE) and 1.5m(TELE).
3. The digital zoom will not operate in the SF mode.
4. If the lighting conditions are brighter than fluorescent lighting condition, the SF doesn’t
activate.
5. If the lighting condition is darker than in fluorescent
38
lighting condition,[SF OFF] message and camera shake
SF OFF
warning indicator (
) will display.
If you press the shutter button in this condition, the SF
will not activate.
6. If the subject is moving the final image captured may be
blurred.
7. As the SF uses the camera’s digital processor, images
taken using the SF may take a little longer for the camera to process.
《42》
+/- button
■ You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure
compensation and Long Time shutter speed.
■ When the SF is selected, ISO value is fixed as AUTO and Exposure value is fixed as 0.0EV.
Main menu
Sub menu
RGB
R (Red), G (Green), B (Blue)
ISO
AUTO, 100, 200, 400
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
Exposure compensation
-2.0 ~ 0.0 ~ +2.0 (0.5EV steps)
LT
Available camera mode
Shutter speed / Aperture Value
(Changed by zoom rate)
■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
● Setting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon (
).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/Down Button : Navigates between R, G, and B
icons.
- Left/Right Button : Changes value of each icon.
3. When you press the +/- button again, the value you set will be saved and RGB setup
mode will end.
38
《43》
+/- button
■ ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
● Selecting an ISO Sensitivity
1. Press the +/- button, and then use the UP and DOWN
38
buttons to select the ISO icon(
). The ISO menu bar
will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO : The camera's sensitivity is automatically changed
by variables such as lighting value or subject brightness.
- 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be saturated in high
luminance. The higher the ISO value, the higher the camera’s sensitivity to light is and
therefore the greater its capacity to take pictures in dark conditions. However, the noise level
in the image will increase as the ISO value increases, making the image appear coarse.
3. When you press the +/- button again, the value you set will be saved and ISO setup mode will end.
■ White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
● Selecting a White Balance
1. Press the +/- button, and then use the UP and DOWN
38
buttons to select the white balance icon (
).
The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set will be
displayed on the LCD monitor.
AUTO
: The camera automatically selects
the appropriate white balance settings, depending on the prevailing
lighting conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a cloudy and overcast sky.
Fluorescent H
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
Fluorescent L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb) lighting.
CUSTOM
: Allows the user to set the white balance according to the shooting
condition.
Different lighting conditions may cause a colour cast on your images.
3. Press the +/- button again. The value you set will be saved and White Balance setup mode
will end.
《44》
+/- button
● Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the White
Balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the SHUTTER button.
3. Your custom white balance value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain
effective until it is overwritten.
38
Measure:Shutter
[ White paper ]
■ Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the +/- button.
● Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN
38
buttons to select the exposure compensation icon
). The exposure compensation menu bar will
appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure indicator (
) will be displayed
on the bottom of the LCD monitor.
※ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
《45》
+/- button
■ Long Time shutter : This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in NIGHT SCENE mode, you can
set the shutter speed and aperture values to your preference.
● Adjusting the shutter speed and aperture values
1. Select the [Night] scene mode.
(M button → [Scene] → [Night])
2. Press +/- button and Long Time shutter menu
(LT, For selecting shutter speed and aperture value) will
be displayed.
3. Configure the Long Time shutter value with the up/ down/
left/ right button.
Up/ Down Button : Select the Aperture / Shutter speed
Left/ Right Button : Change the value. Available aperture value options, depending on
zoom step will be displayed on the menu.
4. Press the +/- button again. The value you set will be saved and the mode will switch to
NIGHT SCENE mode. Press the SHUTTER button to take the picture.
■ Aperture values and shutter speeds changed by zoom scale are listed below.
Supported Aperture Values : AUTO, WIDE : F3.5 ~ F6.3, TELE : F4.5 ~ F8.0
Supported Shutter Speeds : AUTO, 1 ~ 16S
Aperture Value
Large/Small
(Press left button)
Large/Small
(Press right button)
F 3.5
1S
Fast
(Press left button)
《46》
Shutter Speed
Slow
(Press right button)
38
Using the LCD monitor to adjust the camera settings
■ You can use the menu on the LCD monitor to set up recording functions. In any mode with
the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
on the LCD monitor.
INFORMATION
● The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
- When there is no battery capacity.
■ The following functions are available, depending on the mode you have selected.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Camera working mode
Page
Still & Movie
Mode
p.49
Full
Mode set
Size
(Still image)
Size
(Movie)
Auto
Manual
Movie
Night
Portrait
Children
Landscape
Close up
Text
Sunset
Dawn
Backlight
Firework
Beach & Snow
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
640X480
320X240
160X128
S.Fine
Fine
Normal
p.50
p.51
p.51
Quality
p.52
《47》
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
Sub menu
Camera working mode
Frame Rate
30fps
15fps
p.52
Metering
Multi
Spot
p.53
Shooting
Single
Continuous
p.53
Soft
Normal
Vivid
Full OSD
Basic OSD
LCD SAVE
Normal
Red
B&W
Green
Sepia
Blue
Negative
Off
Range 1 ~ 4
Off
2~4 Parts
Pano. 2 Parts
Photo Frame
Off
Frame 1 ~ 9
p.60
Stabilizer
Off
On
p.61
p.54
Sharpness
OSD
Information
p.54
p.55
Effect
Highlight
Composite
p.56
p.58
※ Menus are subject to change without prior notice.
《48》
Page
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Mode Set
Auto
Press the LEFT
or RIGHT button.
Maunal
Press the LEFT
or RIGHT button.
Mode
Still & Movie
Size
2592 X 1944
2272 X 1704
2048 X 1536
1600 X 1200
1024 X 768
640 X 480
Full
Movie
Night
portrait
Children
3. Use the UP and DOWN buttons to select a sub menu.
Mode Set
Press the UP or
DOWN button.
Mode Set
Press the UP or
DOWN button.
Mode Set
Maunal
Auto
Maunal
Movie
Night
portrait
Children
Movie
Auto
Maunal
Movie
Night
portrait
Children
portrait
Children
Auto
Night
4. Select a sub menu, and then the value you set will be saved. Press the MENU button and
the menu will disappear.
Mode
■ You can select the desired working mode by the M(mode) button located on the back of the
camera and [Mode] menu. Auto, manual, movie clip, scene (night, portrait, children,
landscape, text recognition, close-up, sunset, dawn, backlight, fireworks, beach & snow)
camera modes are available.
- [Still & Movie] : A still image mode that was selected on
the [Mode set] menu and movie clip mode
can be selected.
- [Full]
: Auto, Manual, Movie clip and scene
modes can be selected.
Mode
Still & Movie
Full
《49》
Mode Set
■ You can select the desired recording mode.
[Auto]
[Manual]
: For shooting basic still image
: You can still manually configure all
Mode Set
functions except the aperture value and
shutter speed.
[Movie]
: For taking a movie clip
[Night]
: Use this for shooting still images at night
or in other dark conditions.
[Portrait]
: To take a picture of a person.
[Children]
: To take a still picture of moving children.
[Landscape]
: Scenery with green woods or blue sky.
[Close up]
: Close-up shooting for small objects such as plants and insects.
[Text]
: Use this mode to shoot a document.
[Sunset]
: For taking pictures of sunsets.
[Dawn]
: Daybreak scenes.
[Backlight]
: Portrait without shadows caused by backlight.
[Firework]
: Firework scenes.
[Beach & Snow] : For ocean, lake, beach and snowscape scenes.
Auto
Maunal
Movie
Night
portrait
Children
INFORMATION
● When [Night], [Close up], [Sunset], [Dawn] and [Firework] scene mode are selected, it is
possible that camera shake will occur. In this case, take care of the camera shaking.
《50》
Size
■ You can select the image size appropriate for your application.
Mode
Icon
Size
STILL IMAGE mode
5M
4M
3M
2M
MOVIE CLIP mode
1M
VGA
2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480
640
320
160
640X480 320X240 160X128
Size
Size
2592 X 1944
640 X 480
2272 X 1704
2048 X 1536
1600 X 1200
1024 X 700
640 X 480
320 X 240
160 X 128
[ STILL IMAGE mode ]
[ MOVIE CLIP mode ]
INFORMATION
● The higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
《51》
Quality / Frame rate
■ You can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.
Mode
STILL IMAGE mode
MOVIE CLIP mode
Icon
Sub menu
S. Fine
Fine
Normal
30FPS
15FPS
File Format
jpeg
jpeg
jpeg
avi
avi
Frame Rate
Quality
S.Fine
30 FPS
Fine
15 FPS
Normal
[ STILL IMAGE mode ]
[ MOVIE CLIP mode ]
INFORMATION
● S. Fine is the highest quality and Normal is the lowest setting.
Choose the setting appropriate for your needs.
● This file format complies with the DCF(Design rule for Camera File system).
● JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the Joint Photographic Experts
Group. This type of compression is most commonly used for compressing photos and
graphics because it can compress the files efficiently without damaging the data.
《52》
Metering
■ If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
[Multi] (
[Spot] (
: Exposure will be calculated based on an
average of the available light in the image
Metering
area. However, the calculation will be
Multi
Spot
biased towards the centre of the image
area. This is suitable for general use.
: Only the rectangular area in the centre
of the LCD monitor will be metered for
[STILL IMAGE mode]
light. This is suitable when the subject in
the centre is exposed correctly, regardless of the back lighting.
INFORMATION
● The default metering mode is Multi pattern metering.
● If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, It is better to use exposure
compensation.
Continuous shot
■ Select the number of pictures in continuous shooting.
[Single]
[Continuous]
: Take one picture only
: Images will be taken continuously until the
shutter button is released. The shooting
capacity depends on the memory.
※ High resolution and picture quality increases file saving
time, which increases stand-by time.
※ If the [Continuous] sub menu is selected, the flash will
be off automatically.
Shooting
Single
Continuous
[MANUAL mode]
《53》
Sharpness
■ You can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied
only when the captured image is stored on the memory.
Sub menu
Icon
Sharpness
Soft
Normal
Vivid
Description
The edges of the image are softened.
Soft
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
Normal
This is suitable for printing.
The edges of the image are emphasized. The edges will appear
Vivid
sharp, but noise may occur in the recorded image.
OSD information
■ In any mode with the exception of VOICE RECORDING
mode, you can check the recording status in the LCD monitor.
■ Idle mode : If you select the [Save Mode] and the camera isn't
operated during the specified time(about 30
SEC.), the camera power will be idle (LCD
monitor : OFF, Camera status lamp : Blinking)
automatically.
OSD Infomation
Full OSD
Basic OSD
Save Mode
- To use the camera again, press any of the camera buttons except the power button.
- If there is no operation during the specified time, the camera power will be turned off
automatically to save battery life. Refer to page 96 for more information about the auto
power off function.
38
38
38
Full Inf. Mode
Basic Inf. Mode
Save Mode
[Full information mode]
[Basic information mode]
[Power save mode]
《54》
Effect
■ By using the camera’s digital processor, it is possible to add special effects to your images.
Effect
Effect
Normal
Normal
B&W
Sepia
Red
Green
Blue
B&W
Sepia
Red
Green
Blue
[MANUAL mode]
[ MOVIE CLIP mode]
[Normal]
[B & W]
[Sepia]
: No effect is added to the image.
: Converts the image to black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
[Red]
: Captured images will be stored in a red tone.
[Green]
: Captured images will be stored in a green tone.
[Blue]
: Captured images will be stored in a blue tone.
[Negative] : Save the image in negative mode.
《55》
Special Effect
■ By using the camera’s digital processor, it is possible to add special effects to your images.
You can select this menu only in the MANUAL mode.
■ You can select the preset focus frame, Composite shooting and Photo frame function. If a
special effect is selected, the rest special functions set before are cancelled automatically.
■ Even if the camera is turned off, the special effect setting will be preserved. To cancel the
special effect, select the [Off] sub menu of each menu.
■ The digital zoom function will not activate in the special effect menu.
■ Date & Time information will not be displayed on the LCD monitor in the special effect menu.
Special Effect : Preset focus frames
■ You can make the subject stand out from its surroundings.
The subject will be sharp and in focus while making the rest
Special Effect
out of focus.
HighLight
Off
Composite
Range 1
1. Select the MANUAL mode, and press the menu button.
Photo Frame
Range 2
Range 3
2. Press the LEFT/ RIGHT button and select the
Range 4
[Special Effect] menu tab.
Back:◀
Set:OK
3. Select the [HighLight] menu by pressing the UP/ DOWN
button and press the Right button.
4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
- [Off] : The preset focus frame will not be added.
[Range 1]
[Range 2]
[Range 3]
[Range 4]
5. Press the menu button twice and the menu will disappear.
If you select the [Range 1 ~ 4] menu, the preset focus
frame area will appear.
38
Capture:SH
《56》
Edit:+/-
Special Effect : Preset focus frames
● Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Point the camera towards the subject and compose the image by using the LCD monitor.
2. Press the +/- button.
3. The colour of focus frame turns white. Press the Up/Down/Left/Right button to moves the
focus frame position.
4. To select the focus frame position, press the +/- button again and you can take a picture.
38
38
Pressing the +/- button
Capture:SH
Capture:SH
Edit:+/-
Move:▲▼◀▶
[The frame is activated]
Pressing the
Up/Down/Left/Right
button
38
38
Pressing the +/- button
Capture:SH
Edit:+/-
Capture:SH
Move:▲▼◀▶
[After changing the frame
position]
《57》
Special Effect : Composite shooting
■ You can combine 2 ~ 4 different shots in a still image.
1. Select the MANUAL mode, and press the menu button.
2. Press the LEFT/ RIGHT button and select the
Special Effect
[Special Effect] menu tab.
HighLight
Off
Composite
2 Parts
3. Select the [Composite] menu by pressing the UP/ DOWN
Photo Frame
3 Parts
button and press the Right button.
4 Parts
PANO.2 Part
4. Select a desired sub menu by pressing the UP/ DOWN
Back:◀
Set:OK
button and press the OK button.
- [Off]
: cancels the composite shooting
- [2 Parts]
: 2 different shots are combined in a still image.
- [3 Parts]
: 3 different shots are combined in a still image.
- [4 Parts]
: 4 different shots are combined in a still image.
- [Pano. 2 Parts] : 2 different panorama shots are combined in a still image.
5. Press the menu button twice and the menu will disappear.
6. The number of frames you selected in step 4 is displayed on the LCD monitor.
Press the shutter button to start the composite shooting
※ Selecting 2 composite shooting
38
Pressing
the shutter
button
38
Capture:SH
[Ready for taking]
Del:+/-
[First shot]
Pressing
the shutter
button
37
Save:OK
Pressing
the OK
button
100-0003
Del:+/-
[Second shot]
[The result image]
7. To save the composite shots, press the OK button after taking the last shot.
※ You can use the flash button, self-timer button, macro button, voice memo button and the
Zoom W/T button during the composite shooting.
※ If you press the camera buttons (SF button, Play mode button
and M button) during the composite shots, each mode of the
Menu?
camera buttons is executed.
Menu
※ If you press the Menu button during the composite shots, a
Cancel
window will display. Select the submenu value by pressing the
Confirm:OK
Up/Down button and then press the OK button.
Capture:SH
Del:+/[Menu] : A menu will display. After confirming a menu,
a camera mode used before will be executed.
[Cancel] : Turns to the previous capture mode.
※ The voice memo will start after taking the last composite shooting.
※ You can’t select the Voice recording mode during the composite shots.
《58》
38
Special Effect : Composite shooting
● Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the +/- button.
2. A previous image will be deleted and new frame will display. If there is an image taken
before, press the +/- button again and a previous image will be deleted again.
38
38
Pressing the +/- button
Capture:SH
Del:+/-
Capture:SH
[Before taking the 3rd shot]
Del:+/-
[Moving backward to the 2nd shot]
3. Press the shutter button to capture a new image.
● Changing a part of composite shot after taking the last shot
After taking the last composite shot, you can change a part of composite shot.
1. After taking the last shot , a cursor to select a frame will display. Press the
Up/Down/Left/Right button to select the frame.
2. Press the +/- button and an image will be deleted. Composite frame will be activated.
3. Press the Shutter button. You can take another images again by using the
Up/Down/Left/Right button and +/- button.
4. Press the OK button again to save the captured image.
38
38
Pressing the
Up button
Save:OK
Del:+/-
Save:OK
After taking the 4th shot
Pressing the
+/- button
38
Del:+/-
Moving backward to the 2nd shot
Deleting the 2nd shot
Pressing the
Shutter button.
100-0003
38
Pressing the
OK button
Save:OK
A stored image
Del:+/-
After taking the 2nd shot again
《59》
Special Effect : Photo Frame
■ You can add 9 types of frame-like borders to a still image you want to capture.
■ Date & Time information will not be printed on the stored image taken with [Photo Frame]
menu.
1. Select the MANUAL mode, and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[Special Effect] menu tab.
3. Select the [Photo Frame] menu by pressing the UP/ DOWN
button and press the Right button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Off] : The photo frame will not be added.
Photo Frame Frame2
Frame3
Frame4
Back:◀
Set:OK
[Frame 1]
[Frame 2]
[Frame 3]
[Frame 4]
[Frame 5]
[Frame 6]
[Frame 7]
[Frame 8]
[Frame 9]
5. Press the menu button twice and the menu will
disappear. If you select the [Frame 1 ~ 9] menu, the
selected photo frame will appear.
《60》
Special Effect
HighLight
Off
Composite
Frame1
38
Movie Clip frame stabiliser
■ This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
● How to use this function
1. Select the MOVIE CLIP mode by pressing the M (Mode)
button and press the menu button. Press the Left/Right
Stabilizer
Off
button to select the [Stabilizer] menu.
On
2. Select a desired sub menu by pressing the Up/Down
button and press the OK button.
- [Off] : Movie clip frame stabilizer function becomes
disabled.
- [On] : Prevents camera shake during movie recording. The recording frame range will
become narrower than when you select the [Off] menu. Pre-view frames may not
display smoothly on the LCD monitor.
INFORMATION
● When you select the [On] sub menu, the movie clip frame range will be narrow depending
on the movie clip size.
《61》
Starting play mode
■ Turn the camera on and select Play mode by pressing the play mode button (
The camera can now play back the images stored in the memory.
).
■ You can set up the PLAY mode function by using the camera buttons and LCD monitor.
■ If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
■ If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
● Playing back a still image
1. Select the PLAY mode by pressing the play
mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
100-0009
3. Select an image that you want to view by
pressing the LEFT / RIGHT button.
※ Press and hold the LEFT or RIGHT button to
play back the images quickly.
INFORMATION
● Manner mode : Pressing the power button for more than 3 seconds changes the buzzer
and start-up sound setting to OFF, even though you may have set these
to ON.
《62》
Starting play mode
● Playing back a movie clip
100-0009
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (
) will be displayed on
the LCD monitor.
4. Press the play & pause button (
) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press
the play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the RIGHT button.
- To stop playback of the movie clip, press the play & pause button, and then press the
LEFT or RIGHT button.
■ Movie clip capture function : capture still images from the movie clip.
● How to capture the movie clip
Steps 1-2 are the same as those for playing back a still
image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/RIGHT button.
4. Press the Play/Pause button to play the movie clip
5. Press the Play/Pause button while playing the movie
clip. Then press the Shutter button.
6. The paused movie clip is saved in a new file name.
※ The captured movie clip file has same size as the
original movie clip (640X480, 320X240, 160X128).
100-0009
Trim:T
Capture:SH
[Paused]
[Press the shutter button]
《63》
Starting play mode
■ On camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
● If the running time is under 10 seconds, the movie clip can’t
be trimmed.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play & Pause
button.
3. Press the Pause button at the point of the movie clip that
you want to start extracting.
4. Press the T button. (The start point doesn't display on the
status bar, but the start point will be marked.)
5. Press the Play & Pause button and the extracted range will
be displayed on the status bar.
6. Press the Play & Pause button once more at the point
where you wish the extracted file to stop.
100-0009
Trim:T
Capture:SH
100-0009
Trim:T
7. Press the T button and a confirmation window will display.
8. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Trimming] : The extracted frames are saved as a new file
name.
[Cancel]
: The movie trimming will cancel.
100-0009
Trimming?
Trimming
Cancel
Confirm:OK
INFORMATION
● If you want to extract the movie clip at the beginning of the frame, press the Zoom T
button before starting the movie clip. (The start point doesn’t display on the status bar, but
the start point is selected.)
● If the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
● If you doesn’t specify the ending point of the movie clip, the trimming confirmation window
will display at the point of the last frame.
《64》
Starting play mode
● Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
100-0005
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (
) will be displayed on
the LCD monitor.
4. Press the play & pause button (
) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back, press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
《65》
LCD monitor indicator
■ The LCD monitor displays information about the shooting conditions.
⑦
100-0009
①
②
③
④
⑤
⑥
No.
Description
Play mode
Battery
p.18
File Type
Voice memo
p.69
Protect indicator
p.81
DPOF indicator
p.85
Folder name and Stored image number
Size
Av
Tv
ISO
Flash
Date
《66》
2592X1944
F3.5
1/60
100
Off
2005/05/01
Icon
Page
100-0009
Size
Av
Tv
ISO
Flash
: 2592X1944
: F3.5
: 1/60
: 100
: Off
Date
: 2005/05/01
Size
Aperture value
Shutter speed
ISO sensitivity
Whether or not the
flash is used
Recording date
Using the camera buttons to adjust the camera
■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Play mode button
■ If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it (Under 1 Sec.) again to switch to
Recording mode.
■ You can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button (Under 1 Sec.) again to turn off the camera.
■ Pressing the Play mode button for over 1 Sec., you can check the recording information.
100-0009
Pressing for over 1 Sec.
Pressing under 1 Sec.
[Play mode display]
Size
Av
Tv
ISO
Flash
Date
: 2592X1944
: F3.5
: 1/60
: 100
: Off
: 2005/05/01
[Recording information]
《67》
Thumbnail(
) / Enlargement(
) button
■ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
● Thumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement button.
100-0009
Pressing the thumbnail
button (
Pressing the enlargement
button (
Highlighted image
[Normal display mode]
[Thumbnail display mode]
● Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an enlarged
view by checking the image enlargement indicator
shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
X1.5
《68》
Thumbnail(
) / Enlargement(
) button
● The maximum enlargement rate in proportion to the image size.
Image size
2592
2272
2048
1600
1024
640
Maximum enlargement rate
X10.1
X8.8
X8.0
X6.2
X4.0
X2.5
● Trimming : You can extract part of the image that you want and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing
Trimming?
Trimming
the 5 function button.
Cancel
3. Press the MENU button and a message will be
Confirm:OK
displayed as shown alongside.
X1.5
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Trimming] : The trimmed image will save as a new file name, and display on the LCD
monitor.
- [Cancel] : The trimming menu will disappear.
※ If there is little memory space to save the trimmed image, the image can’t be trimmed.
※ To delete the enlarged image during the trimming function, press the delete button.
Voice (
) memo / Up button
■ When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
■ When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice to a stored still image.
● Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (
) and the voice memo
indicator will display. The camera is now ready to record
a voice memo.
100-0009
START:SHUTTER
《69》

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:05:24 16:16:03+09:00
Create Date                     : 2005:05:24 16:15:44+09:00
Title                           : sl1en_c_v09-1
Author                          : samyoung
Creator                         : QuarkXPress(MAC): LaserWriter 8 8.3fc2
Producer                        : Acrobat Distiller 5.0.2 (Macintosh)
Page Count                      : 70
Mod Date                        : 2005:05:24 16:16:03+09:00
Creation Date                   : 2005:05:24 16:15:44+09:00
Metadata Date                   : 2005:05:24 16:16:03+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools