Hanwha Techwin DIGIMAXU-CA5 Digital Camera User Manual UC2 en c V07
Samsung Techwin Co Ltd Digital Camera UC2 en c V07
Contents
- 1. Users Manual 1 of 2
- 2. Users Manual 2 of 2
Users Manual 2 of 2
61
Voice ( ) memo / Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
5. The ( ) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause ( )/ Down button
In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
[ Voice recording is stopped ] [ Voice recording is paused ][ Voice recording is playing ]
3
3 3
Stop : Shutter
PLAY
PAUSE
PLAY
62
LEFT/ RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab
to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button : When the menu is displayed on the LCD monitor, the OK button is used for
confirming data that is changed by using the 5 function button.
The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the
LCD monitor by pressing the play mode button.
Pressing the LCD( ) button in the PLAY mode will
change the display as shown below. [Image & Icons]
[Image & Information] [Image only]
[ Image & Icons ] [ Image & Information ] [ Image only ]
Pressing the LCD button
Pressing the
LCD button
Pressing the
LCD button
LCD ( ) button
Size :
2592X1944
Av : F2.8
Tv : 1/60
ISO : 100
Flash : Off
Date : 2005/01/01
63
Album button (M button)
All A1 A2
A3 A4 A5
A6 A7 A8
Select
Slide
Add
Remove
Exit:MENU Move :
All A1 A2
A3 A4 A5
A6 A7 A8
Select
Slide
Add
Remove
Exit:MENU
A4
Select
Slide
Add
Remove
Exit:MENU Move :
You can organise the captured still images into albums
by using the M button.
This camera has 8 albums and each album can take up
to 100 images.
How to use the album
Selecting the album
1. In the play mode, press the M button.
2. Select [Select] menu by pressing the Up/Down button
and press the Right button.
3. Select a desired album by pressing the
Up/Down/Left/Right buttons and press the OK button.
Inserting still images into the album
1. After selecting an album, press the menu button.
2. Select the [Add] menu by pressing the Up/Down
button and press the Right button.
64
Album button (M button)
A4
No Image!
A4
A4
No Image!
Add
Add
Cancel
Confirm:OK
A4
Remove
Remove
Cancel
Confirm:OK
A4
Select
Slide
Add
Remove
Exit:MENU Move :
Select
All Pics
3. Select the still images you wish to add by pressing the
Up/Down/Left/Right buttons and press the Zoom T
button. V marks are displayed on the selected images.
* To cancel the selection, press the Zoom T button again.
4. Press the OK button and a confirmation window will
display. Select a desired sub menu by pressing the
UP/ DOWN button and press the OK button.
- [Add] : Inserts the selected images into the album.
- [Cancel] : Cancels the inserting images.
Removing still images from the album
1. Select a desired album and press the menu button.
2. Select [Remove] menu by pressing the Up/Down
button and press the Right button.
3. Select a desired sub menu and press the OK button.
- [All] : All of the still images in the album will be
removed.
- [Select] : Specific still images in the album can be
removed.
If [Select] is selected
- Select images that you want to remove by pressing
the Up/Down/Left/Right buttons and press the
Zoom T button. V marks are displayed on the
selected images.
4. Press the OK button and a confirmation window will
display. Select a desired sub menu by pressing the
UP/ DOWN button and press the OK button.
- [Remove]: Removes the selected images from the
album.
- [Cancel] : Cancels the removing images.
* The removed images are not deleted from the
memory, but just removed from the album.
65
Album button (M button)
If a an image is deleted from the memory, the image doesn’t display on an album.
An image can’t be added twice into the same album.
An image can be added into the different albums.
INFORMATION
A4
Select
Slide
Add
Remove
Exit:MENU Move :
Select
All Pics
A4
Select
Slide
Add
Remove
Exit:MENU Move :
A4
Select
Slide
Add
Remove
Exit:MENU Move :
Start
Interval
Repeat
Effect
3 Sec
Off
Cancel
Start
Interval
Repeat
Effect
3 Sec
Off
Cancel
Playing back the albums
Playing back all of the albums
1. Select [All] menu and press the OK button. All of the
albums will be selected.
2. Press the menu button.
3. Select [Slide] menu by pressing the Up/Down button
and press the Right button.
You can select [Start], [Interval], [Repeat] and
[Effect] menus.
- [Start] : Start the slide show
- [Interval] : Set the slide show play interval
- [Repeat] : Choose to repeat the slide show after
finishing the first cycle.
- [Effect] : Unique screen effects can be used for
the slide show.
4. Select [Start] menu by pressing the Up/Down button
and press the OK button to start the slide show.
Playing a desired album
1. Select a desired album and press the OK button.
2. Press the menu button.
3. Select [Slide] menu by pressing the Up/Down button
and press the Right button.
You can select [Start], [Interval], [Repeat] and
[Effect] menu.
4. Select the [Start] menu and press the OK button to
start the slide show.
A4
Select:T Set:OK
66
Delete( ) button
This deletes images stored on the memory card.
Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
INFORMATION
Deleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete,
and then press the DELETE ( ) button.
2. The following message will be displayed on the LCD monitor.
3. Select the submenu values by pressing the UP/DOWN button and then press the OK
button.
If [Delete] is selected : deletes the selected images.
If [Cancel] is selected : cancels "Delete Image".
Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE( )
button.
2. A message will display as shown alongside on the LCD
monitor.
3. Select the submenu values by pressing the UP/DOWN
button and then press the OK button.
If [Delete] is selected: deletes the selected images.
If [Cancel] is selected: cancels "Delete Image".
Press the
DELETE button.
Delete?
Delete
Cancel
Confirm:OK
Delete?
Delete
Cancel
Confirm:OK
67
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set
up in Play mode are as follows. To capture an image after setting up the play menu, press
the PLAY button.
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
-
-
-
-
-
-
-
-
-
Slide
p. 56
p. 56
p. 55
-
1, 3, 5, 10sec
Off / On
Cancel
Effect 1, 2, 3, 4
Right 90
Left 90
180
Horizontal
Vertical
Start
Interval
Repeat
DPOF
Standard
Index
Size
Select/ All Pics/ Cancel
No/ Yes
Select/ All Pics/ Cancel
Protect
Delete
Effect
Select
All Pics
Select
All Pics
Unlock / Lock
Resize
Rotate
p. 57
p. 57
p. 57
2272 x 1704
2048 x 1536
1600 x 1200
1024 x 768
640 x 480
User Image
68
Setting up the play back function using the LCD monitor
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
Auto
PostCard
4X6
L
2L
A4
A3
Auto
Full
1
2
4
8
9
16
Auto
Plain
Photo
FastPhoto
Auto Set
Custom Set
Images
p. 75
p. 75
p. 74
No
Yes
Size
Layout
Type
One Pic
All Pics
This menu is available while the camera is connected to a PictBridge supporting printer
(direct connection to the camera, sold separately) with a USB cable.
69
Setting up the play back function using the LCD monitor
Quality
Menu tab Main menu Sub menu Secondary menu Page
Auto
Draft
Normal
Fine
Auto
Off
On
Auto
Off
On
Standard
-
Index
-
Cancel
-
No
-
Yes
-
No -
Yes -
Print
Custom Set
p. 76
p. 76
p. 77
p. 75
File Name
Date
DPOF Print
Reset
Menus are subject to change without prior notice.
70
Starting the slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Slide]
menu tab.
Start the slide show: The slide show can start only in the
[Start] menu.
1. Use the Up/Down buttons to select the [Start] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button ( ) again to resume the slide show.
- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHT
button.
Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHT
button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
Repeat setting : setting the slide show to repeat after the first cycle.
1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[On] selected : The slide show is repeated until cancelled.
[Off] Selected : The slide show is closed after one cycle.
3. Press the OK button to save the configuration.
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [Power Off] function can’t be activated.
While the slide show is playing, only the first frame of a MOVIE file is displayed.
INFORMATION
Slide
Exit: MENU Move :
Start
Interval 1 sec
Repeat Off
71
Starting the slide show
Protecting images
Configure slide show effects: Unique screen effects can be used for the slide show.
1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHT
button.
2. Use the Up/Down Button to select the type of effect.
[Cancel] : Normal display.
[Effect 1] : Image is displayed slowly.
[Effect 2] : Image is displayed slowly from the centre
outwards.
[Effect 3] : Image moves from the top left.
[Effect 4] : The image slides diagonally from top left to
bottom right.
3. Press the OK button to confirm the setting.
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Protect]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select ] : Selection window for an image to be
protected/released is displayed.
- Up/Down/Left/Right : Select an image
- Zoom W/T Button : Protect/release the image
- Menu Button : Your changes will be saved and
the menu will disappear.
[All Pics] : Protect/release all saved images
- Zoom W/T Button : Protect/release the images
- Menu Button : Your changes will be saved and
the menu will disappear.
Back:
Set : OK
Interval Cancel
Repeat Effect1
Effect Effect2
Slide
Protect
Exit: MENU Move :
Select
All Pics
Set:OK
WUnlock T
Set:OK
WUnlock T
72
Protecting images
- If you protect an image, the protect icon will be displayed
on the LCD monitor. (An unprotected image has no
indicator)
- An image in LOCK mode will be protected from the
delete function or [Delete] functions, but will NOT be
protected from the [Format] function.
Deleting images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images.
Important shots should be stored on a computer before deletion takes place. The startup
image is stored in the camera's internal memory (i.e., not on the memory card) and it will not
be deleted even if you delete all files on the memory card.
Deleting images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Delete]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select ]: Selection window for an image to delete is
displayed.
- Up/Down/Left/Right : Select an image
- Zoom T Button : Select the image for deletion.
(V mark)
- OK Button : Press the OK Button to display
confirmation message. Select the
[Delete] menu and press the OK
button to delete V marked images.
[All Pics] : Displays confirmation window. Select the
[Delete] menu and press the OK button to
delete all unprotected images. If there aren’t
protected images, all the images are deleted
and a [No Image!] message will display.
4. After deletion, the screen will be changed to the play
mode screen.
Del:OK
Select:T
Del:OK
Delete?
Delete
Cancel
Confirm:OK
Delete
Exit: MENU Move :
Select
All Pics
73
Resize
Change the resolution (size) of pictures taken. Select [[User image]] to save an image to be
the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Resize]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
A large sized image can be resized to a smaller sized image, but not vice versa.
Only JPEG images can be resized. Movie clip(AVI) and Voice recording(WAV) files can’t
be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name. The [User Image] image is stored not on the
memory card but on the internal memory.
Only two [User Image] images can be saved. If you save a new [User Image] image, the
existing startup image will be deleted in order.
If the memory capacity is insufficient to store the resized image, a [Card Full!] message
will display on the LCD monitor and the resized image will not be stored.
INFORMATION
Resize
2272X1704 2048X1536 1600X1200
1024X768
640X480
User image
2592 O O O O O O
2272 X O O O O O
2048 X X O O O O
1600 X X X O O O
1024 X X X X O O
640 X X X X X O
Image Resize Types
Exit: MENU Move :
2272X1704
2048X1536
1600X1200
Resize
74
Rotating an image
You can rotate the stored images by various degrees.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Rotate]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
4. Press the OK button and a confirmation window will
display. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
[Rotate] : The image will be rotated.
[Cancel] : The rotation will be cancelled.
5. Press the OK button and the rotated image will be displayed.
If you display the rotated image on the LCD monitor, empty spaces may appear to the left
and right of the image.
[Right 90˚] : Rotate picture
in a clock-wise direction
[Left 90˚] : Rotate picture in a
counter-clock-wise direction
[180˚] : Rotate picture 180
degrees
[Horizontal] : Rotate picture
horizontally
[Vertical] : Rotate picture
vertically
DPOF
DPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
Exit: MENU Move :
Right 90˚
Left 90˚
180˚
Rotate
75
DPOF : STANDARD
Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Index] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index
format.
5. Press the OK button to confirm the setting.
DPOF : INDEX
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Standard] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to print is
displayed.
- Up/Down/Left/Right: Select an image to print.
- Zoom W/T Button: Select the number of prints.
[All Pics] : Configure number of prints for all pictures
except movie and voice files.
- W/T button : Select a number of prints
[Cancel] : Cancel the print setup.
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator ( ) will show.
Set:OK
W0 Prints T
Set:OK
WPrints T
DPOF
Exit: MENU Move :
Standard Select
Index No
Size Select
DPOF
Back:
Set : OK
Standard
Index No
Size Yes
76
DPOF : PRINT SIZE
You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Size] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to be changed
printed size is displayed.
- Up/Down/Left/Right : Select an image.
- Zoom W/T Button : Change the print size.
- OK button : Your changes will be saved and the menu
will disappear.
[All Pics] : Change print size of all saved images.
- Up/Down/Left/Right : Select an image.
- W/ T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
* DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7,
8X10
Set:OK
WT
Set:OK
WT
DPOF
Back:
Set : OK
Standard Select
Index All Pics
Size Cancel
77
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [Setup] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select [Printer] menu by pressing the UP/ DOWN button
and press the OK button.
Connecting the Camera to a Printer
Using the USB cable with Cradle : Connect the camera and the cradle. Connect the cradle to
a printer’s USB port with the supplied USB cable.
Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
If you selected [Computer] in Step 4, when you connect the camera to your printer, the
[Connecting Computer] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
DPOF
Back:
Set : OK
Sound
USB Computer
Lamp Printer
NOR
78
PictBridge: Picture Selection
Select pictures to print
1. The [Images] menu will appear.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [One Pic] is selected : The PictBridge function will
be applied only to the
picture currently displayed.
When [All Pics] is selected : The PictBridge function will
be applied to all pictures,
excluding movie clips and voice files.
Images : Select the pictures to be printed.
Printer Setup : Setting up printing(Auto Set/ Custom Set)
Print : Printing pictures
DPOF Print : Printing the DPOF files
Reset : Initializing the PictBridge functions
You can set up the following settings from the PictBridge menu.
[When [One Pic] is selected] [When [All Pics] is selected]
- Press the Up/Down button to select the number of prints. : Maximum 30 prints.
- Use the Left/Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will
appear as shown below.
Images
Exit : MENU Move:
One Pic
All Pics
0
Exit:Shutter Set:OK
10
PREV NEXT
0
Exit:Shutter Set:OK
79
PictBridge: Print Setting
Menu
Size Setting the size of the printing paper
Auto, PostCard, 4x6, L, 2L, A4, A3
Setting the number of pictures to be
printed on a sheet of paper
Type Setting the quality of the printing paper Auto, Plain, Photo, FastPhoto
Quality
Setting the quality of the picture to be printed
Auto, Draft, Normal, Fine
Date Setting whether to print the date Auto, Off, On
File Name Setting whether to print the file name Auto, Off, On
AUTO SET
1. Use the LEFT and RIGHT buttons to select the
[Auto Set] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[No] : [Custom Set] values are kept.
[Yes] : All values in the [Custom Set] are automatically
changed.
Some menu options are not supported in all manufacturer and printer models. If not
supported, the menus are still displayed in the LCD, but are not selectable.
If the setting values are not changed in the automatic/manual setting, the setting values are
automatically kept.
Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
Function Sub menu
The menus you can set up are as follows:
Auto Set
Exit : MENU Move:
No
Yes
Custom Set
Back:
Set : OK
Size Auto
LayOut PostCard
Type 4X6
Auto, Full, 1, 2, 4, 8, 9, 16Layout
1. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
80
PictBridge: Printing
DPOF Print : This allows you to directly print the files with DPOF information.
1. Use the LEFT and RIGHT buttons to select the
[DPOF Print] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[No] : Cancel the printing
[Yes] : Directly print the file with the DPOF information
Depending on the manufacturer and printer model,
some menus may not be available. With a printer without supporting the DPOF, the
menu is still displayed but not available.
Printing Pictures
1. Use the LEFT and RIGHT buttons to select the [Print]
menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[Standard]
: Print the pictures stored in the memory card
in set numbers. One picture is printed on
one piece of paper.
[Index] : Print multiple images on one sheet of
paper.
3. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[No image!] message will be displayed. Press the
Menu/OK button while printing to cancel the printing and
the [Images] menu is displayed.
Number of pictures in an index print varies depends
on the printer used.
1/1
Print
Exit : MENU Move:
Standard
Index
DPOF Print
Exit : MENU Move:
No
Yes
Cancel : OK
81
PictBridge : RESET
Initialises user-changed configurations.
1. Use the LEFT and RIGHT buttons to select the [Reset]
menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings will be
reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
Reset
Exit : MENU Move:
No
Yes
82
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by are default settings.
Menu tab Main menu Sub menu Secondary menu Page
Reset -
Series -
Power Off
Off, 1, 3, 5, 10 min
- p.80
ENGLISH
P”CCK»…
PORTU.
FRANÇAIS DUTCH
DEUTSCH DANSK
ESPAÑOL SVENSKA p.81
ITALIANO SUOMI
MELAYU
No -
Yes -
04/07/01 13:00 -
yy/mm/dd -
dd/mm/yy -
mm/dd/yy -
Off -
Imprint Date - p.82
D & Time -
Off -
Low -
Medium -
High -
Computer -
Printer -
File
Language
Format
D & Time
Sound
p.79
p.81
p.82
p.83
p.83
USB
83
Setup menu
This function allows the user to select the file naming format.
Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [File] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Reset] : After using the reset function, the next file name will be set from 0001 even after
formatting, deleting all or inserting a new memory card.
[Series]: New files are named using numbers that follow the previous sequence, even
when a new memory card is used, or after formatting, or after deleting all pictures
5. Press the menu button twice and the menu will disappear.
File name
* Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Secondary menu Page
Off -
On -
Off -
On -
Dark -
LCD Normal - p.85
Bright -
NTSC -
PAL -
Quick View Off, 1, 3, 5 sec -
No -
Yes -
Video Out
Lamp
AF Lamp
Reset
p.84
p.85
p.86
Back:Set : OK
File
Reset
Power Off Series
Language
NOR
Setup
84
File name
The first stored folder name is 100SSCAM, and the first file name is SUC50001.
File names are assigned sequentially from SUC50001 SUC50002 ~ SUC59999.
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM
101SSCAM ~ 999SSCAM.
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off setting
will be preserved.
Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording, playing back a movie clip and the [Composite]
shots.
INFORMATION
Auto power off
Setting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Power Off] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [Off] : The power off function will not operate.
[1, 3, 5, 10min] : The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
Back:Set : OK
File
Off
Power Off 1 min
Language 3 min
NOR
Setup
85
Language
Setting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Language] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai. Malaysian and Arabic.
5. Press the menu button twice and the menu will disappear.
Formatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Format] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [No] is selected : The memory card will not be formatted.
Press the menu button twice and the menu display will disappear.
If [Yes] is selected : A [ Please Wait! ] message appears and the memory card will be
formatted. If you ran FORMAT in Play mode, a [ No Image! ] message
will appear.
There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or
AC adapter are removed and inserted again, the language setting will be preserved.
Formatting a memory card
This is used for formatting the memory card. If you run [Format] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can t recognise or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a
[ Card Error! ] message.
INFORMATION
Back:Set : OK
File
English
Power Off
Language
FRANÇAIS
NOR
Setup
Back:Set : OK
Power Off
Language No
Format
Yes
NOR
Setup
86
Setting up the Date/ Time/ Date type
You can change the date and time that will be displayed on the captured images and set up
the date type.
Setting Date/Time & Selecting Date Format
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [D & Time] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4.
Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK button.
RIGHT button : Selects the year/month / day/hour / minute date type.
LEFT button : Moves the cursor to the [D & Time] main menu if the cursor is at
the first item of the date and time setup. In all other cases, the
cursor will be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value.
- Date type : [yy/mm/dd] / [dd/mm/yy] / [mm/dd/yy]
5. Press the menu button twice and the menu will disappear.
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2.
Press the LEFT/ RIGHT button and select the [Setup] menu tab.
3. Select the [Imprint] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[Off] : The DATE & TIME will not be imprinted on the image file.
[Date] : Only the DATE will be imprinted on the image file.
[D & Time] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
Imprinting the recording date
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24
hour clock.
The imprint function is applied only to still images.
INFORMATION
Back:Set : OK
Format Off
D & Time Date
Imprint D & Time
NOR
Setup
Back:Set : OK
Language
Format
D & Time
NOR
Setup
05 / 01/ 01 01:00
yy/mm/dd
87
Sound
Connecting an External Device (USB)
If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Sound] sub menu : Off/ Low/ Medium/ High
5. Press the menu button twice and the menu will disappear.
You can select an external device to which you want to connect the camera using the USB cable.
Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Computer] : Select this if you want to connect the camera to your PC.
Refer to page 105 for instructions on how to connect the camera to your PC.
[Printer] : Select this if you want to connect the camera to your printer.
Refer to page 73 for instructions on how to connect the camera to your
printer.
5. Press the menu button twice and the menu will disappear.
Back:Set : OK
D & Time Off
Imprint Low
Sound Medium
NOR
Setup
Back:Set : OK
Imprint
Sound Computer
USB Printer
NOR
Setup
88
Function lamp
Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Lamp] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [Off] is selected : The function lamp will not light up.
If [On] is selected : The function lamp will light up.
Function Description
The lamp blinks and turns off when the camera is ready
to take a picture
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
While movie recording The lamp blinks at a 1-second interval
While voice recording The lamp blinks at a 1-second interval
When the USB cable is inserted The lamp lights up
Transmitting Data The lamp blinks
While the self timer is
functioning
After taking a picture
Power on
The lamp will function while using the self-timer even if
the configuration is set to off the lamp.
(Based on 10-second Self-timer; see p. 36)
Back:Set : OK
Sound
USB Off
Lamp On
NOR
Setup
You can turn on and off the function lamp located on the front of the camera.
Description of the Function lamp
89
Auto Focus lamp
LCD brightness
You can adjust the LCD brightness.
Adjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : Dark, Normal, Bright
5. Press the menu button twice and the menu will disappear.
You can turn on and off the Auto Focus lamp
How to set up the lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [AF Lamp] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [Off] is selected : The AF lamp will not light up.
If [On] is selected : The AF lamp will light up.
If you select [Off] menu and take an image in poorly lit conditions or select the [Night]
scene mode, the camera may not take exact focus.
Back:Set : OK
USB
Lamp Off
AF Lamp On
NOR
Setup
Back:Set : OK
Lamp Dark
AF Lamp Normal
LCD Bright
NOR
Setup
90
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Video Out] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Video Out] sub menu : NTSC, PAL
5. Press the menu button twice and the menu will disappear.
Connecting to an external monitor
Using the AV cable with Cradle : Connect the camera and the cradle. Connect the cradle
to an external monitor with the supplied AV cable.
Using the AV cable with Camera : Connect the camera to an external monitor with the
supplied AV cable.
[Using the AV cable with Cradle]
[Using the AV cable with Camera]
Back:Set : OK
AF Lamp
LCD NTSC
Video Out PAL
NOR
Setup
91
Selecting Video out type
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
INFORMATION
92
Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Quick View] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Off] : The quick view function can’t be activated.
[1, 3, 5sec] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
Initialisation(RESET ALL)
All camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
Initialising the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Reset] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [No] is selected : Settings will not be restored to their defaults.
If [Yes] is selected : All settings will be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
Back:Set : OK
LCD Off
Video Out 1 sec
Quick View 3 sec
NOR
Setup
Back:Set : OK
Video
Quick View No
Reset Yes
NOR
Setup
93
Setting up the MYCAM menu
You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by are default settings.
Menu tab Main menu Sub menu Page
Off LOGO
User Image 1 User Image 2
Off Sound 1
Sound 2 Sound 3
Off Sound 1
Sound 2 Sound 3
S.Image
S.Sound
SH.Sound
p.87
p.88
p.88
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Mycam]
menu tab.
3. Select the [S.Image] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Start up image
Use a saved image for the start-up image with the [User Image] in the [Resize] menu in
the play mode.
The start-up image will not be deleted by deleting all images or [Format] menu.
INFORMATION
* Menus are subject to change without prior notice.
Back:Set : OK
S.Image
S.Sound
SH.Sound
2592
Mycam
94
Start up sound
Shutter sound
Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Mycam]
menu tab.
3. Select the [S.Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
You can select the sound that is activated whenever the camera is turned on.
Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Mycam]
menu tab.
3. Select the [SH.Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
You can select the shutter sound.
Back:Set : OK
2592
Mycam
S.Image Off
S.Sound Sound1
SH.Sound Sound2
Back:Set : OK
2592
Mycam
S.Image Off
S.Sound Sound1
SH.Sound Sound2
95
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals (like naphthalene and
mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning to use the
camera for a long period of time
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or sand get
inside the camera. Doing so may result in failure or may permanently damage the unit.
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
96
Important notes
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
If the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
Before an important event or going on a trip, you should check the camera condition.
- Take a picture for testing the camera condition and prepare extra batteries.
- Samsung cannot be held responsible for camera malfunctions.
97
Warning indicator
There are several warnings that may appear on the LCD display
Card Error !
Memory card error
Turn off the camera power and turn it on again
Insert the memory card again
Insert the memory card and format the memory card (p.73)
No Card !
A memory card is not inserted
Insert a memory card
The camera can’t recognise the memory card
Insert the memory card again
Turn off the camera power and turn it on again
Card Locked !
The memory card is locked
SD memory card : Slide the write protect switch to the top of the memory card
Card Full !
There is insufficient memory capacity to take an image
Insert a new memory card
Delete unnecessary image files to free up some memory
No Image !
There are no images stored on the memory card
Take images
Insert a memory card that is holding some images
File Error !
File error
Format the memory card
Memory card error
Contact a camera service centre
Low Battery !
There is low battery capacity
Insert charged battery
98
Warning indicator
Please check the following
Before contacting a service centre
Low Light !
When taking pictures in dark places
Use a tripod and take pictures in Flash Photography mode
Set USB
[USB] sub menu and connected device are not matched.
Reconfigure [USB] in the [Setup] menu.
Out Of Number
When selecting too many printing pages in the PictBridge menu.
Select printing page within the limitation.
The camera doesn’t switch on
There is low battery capacity
Insert charged battery
Batteries are inserted incorrectly with the reverse polarities
Insert the batteries according to the polarity marks (+, -)
The rechargeable battery is not inserted
Insert the battery and turn on the camera
An AC Power Adapter is not connected
Connect an AC Power Adapter
The camera power ceases while in use
The batteries are exhausted
Insert charged battery
The Camera is turned off automatically
Turn off the camera power and turn it on again
An AC Power Adapter is not connected
Connect an AC Power Adapter
Batteries drain quickly
The Camera is being used in low temperatures
Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in
order to take images
99
Before contacting a service centre
Camera does not take images when pressing the Shutter button
The memory card is not inserted
After turning the camera off, insert a new memory card
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.82)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to [Card Locked !] error message (p.93)
The camera’s power is off
Turn the camera power on
The batteries are exhausted
Insert charged battery.
Batteries are inserted incorrectly with the reverse polarities
Insert the batteries according to the polarity marks (+, -)
The camera suddenly stops working while in use
The camera was stopped due to a malfunction
Remove /re-insert batteries and switch the camera on
The images are unclear
A picture was taken within 0.8 m from the subject without setting an appropriate macro mode
If the subject is closer than 0.8m, select macro shot mode
Taking a picture beyond the flash range
Take a picture within the flash range
The lens is smudged or dirty
Clean the lens
The flash does not fire
Flash off mode has been selected
Dis-engage flash off mode
The camera mode can’t use the flash
Refer to the FLASH instruction (p.30)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has adopted the default settings
Reset the date and time correctly
100
Before contacting a service centre
The camera buttons do not operate
Camera malfunction
Remove /re-insert batteries and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card
The images don't play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is different to the original scene
White balance setting is incorrect
Select appropriate White balance
Images are too bright
Exposure is excessive
Reset exposure compensation
No image on external monitor
The external monitor has not been connected properly with the camera
Check the connection cables
There are incorrect files in the memory card
Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
Cable connection is incorrect
Check the connection
The camera is off
Turn the camera on
The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.3.
Alternatively the PC does not support USB
Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.3 to PC that supports USB
The camera driver is not installed
Install a [USB Storage Driver]
101
Specifications
Type 1/2.5" CCD
Effective Pixel Approx. 5.13 Mega-pixel
Total Pixel Approx. 5.25 Mega-pixel
SHD Lens f = 5.8 ~ 17.4mm
(35mm film equivalent : 35 ~ 105 mm)
F No. F2.8 ~ F4.8
Still Image mode : 1.0X ~ 5.0X
Play mode : 1.0X ~ 8.0X (depends on image size)
LCD Monitor 1.8" colour TFT LCD (118,080 dot)
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)
Auto Macro : 5cm ~ infinity (Wide), 50 ~ infinity (Tele)
Type Mechanical and Electronic shutter
Speed 1 ~ 1/2,000 sec. (Night Scene mode : 16 ~ 1/2,000 sec.)
Program AE
Metering : Multi, Spot
Compensation 2EV (0.5EV steps)
ISO Equivalent Auto, 100, 200, 400
Auto, Auto & Red-eye reduction,
Fill-in, Slow sync, Off, SF.
Range Wide : 0.3 ~ 3.0m, Tele : 0.5 ~ 2.0m
Recharging Time Approx. 5 sec.
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sepia, Negative, RGB
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording (max. 1 hour)
Voice Memo in Still Image (max. 10 sec.)
Date Imprinting Date&Time, Date, Off (user selectable)
Modes : Auto, Manual, Scene
Scene : Night, Portrait, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach/Snow
Continuous : Single, Continuous
Self-timer : 2 sec., 10 sec., Double, Remote control
With audio (recording time : memory capacity dependent)
Movie Clip Size : 640x480, 320x240, 160x128 (Digital zoom enable)
Frame rate : 30 fps, 15 fps
Media SD : up to 1GB guaranteed (MMC Compatible)
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : avi (MPEG-4) Audio : WAV(voice memo)
Image
Sensor
Lens
Focal Length
Range
Control
Modes
Digital Zoom
Focusing
Shutter
Exposure
Flash
Voice Recording
White Balance
Shooting
Storage
Still Image
File Format
102
Specifications
2592 : 2592x1944, 2272 : 2272x1704,
2048 : 2048x1536, 1600 : 1600x1200,
1024 : 1024x768, 640 : 640x480
2592 : Super fine 5, Fine 10, Normal 15
2272 : Super fine 6, Fine 12, Normal 19
2048 : Super fine 10, Fine 20, Normal 31
1600 : Super fine 10, Fine 20, Normal 31
1024 : Super fine 25, Fine 50, Normal 76
640 : Super fine 64, Fine 127, Normal 194
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Single image, Thumbnails, Slide show, Movie Clip,
Album Organisation
Editing Trimming, Resizing, Rotating
Digital output connector : USB 2.0, 1.1
Audio : Mono Video output : NTSC, PAL (user selectable)
DC power input connector : 4.2V
Rechargeable battery : 1 x Li-ion (SLB-1137)
Adaptor : DC 4.2V, 750mA(+/-50mA) (SAC-41)
* Included power source may vary depending on sales region.
Dimensions (W X H X D) 103.1 X 56 X 31.4mm
Weight Approx. 130.6g (without batteries and card)
Operating Temperature 0 ~ 40˚C
Operating Humidity 5 ~ 85%
Camera Driver
Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.3)
Software Arcsoft PhotoImpression, Digimax Viewer,
Digimax Reader.
Safety Flash mode
New type charging system(Cradle, USB cable(24pin, optional))
MPEG-4 VGA 30fps Movie Clip(Embedded Editing program)
Special Effect(Highlight, Composite shot, Photo Frame)
Easy Mode chage button(M button)
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
Capacity
(32MB)
Image Size
Storage
Interface
Image Play Type
Power Source
Special Features
Application
6806-2462
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
FAX : 002711 4619110
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
FAX : (49) 6196 66 53 66
www.samsungcameras.de
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4538-6858
www.samsungphoto.fr
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
www.samsungcamera.com.cn
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)