Hanwha Techwin DIGIMAXV800 Digital Camera User Manual v800en c V19

Download:
Mirror Download [FCC.gov]
Document ID	572103
Application ID	CS13z68yrURl4+8r5J1p3A==
Document Description	Users Manual 2 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.75kB (2146889 bits)
Date Submitted	2005-08-16 00:00:00
Date Available	2005-08-16 00:00:00
Creation Date	2005-08-16 15:58:25
Producing Software	Acrobat Distiller 5.0.2 (Macintosh)
Document Lastmod	2005-08-16 15:58:41
Document Title	v800en_c_V19
Document Creator	QuarkXPress(MAC): LaserWriter 8 8.3fc2
Document Author:	samyoung

+/- button
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can
select the most appropriate white balance setting for a given shooting environment by setting
up the custom white balance.
1. Select the CUSTOM (
) menu of the White Balance.
You can select CUSTOM 1 or CUSTOM 2 white
balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the SHUTTER button.
3. The value you set will be saved.
- The custom white balance value will be applied, starting
with the next picture you take.
- The user configured white balance will remain effective
until it is overwritten.
[White paper]
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the +/- button.
Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN
buttons to select the exposure compensation icon (
).
The exposure compensation menu bar will appear as
shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will close. If you change the exposure
value, the exposure indicator (
) will be displayed on the bottom of the LCD monitor.
* A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
41
AEL/ASM button
The camera measures brightness of the object and automatically set the best exposure
value. If difference between the exposure values of the object and background is too great,
use the AEL button to manually set the exposure value against sunlight or in strong light.
This button is available in the PROGRAM, Aperture priority(A), Shutter priority(S), MySET
and MOVIE CLIP mode.
Use the automatic exposure lock.
1. Ensure the subject in the centre of the autofocus frame.
2. Move the camera to point the automatic focus mark on the object of desired exposure.
3. Press the AEL button to lock the exposure and display the AEL icon in the bottom of the
LCD.
4. Focus the camera again and press the shutter button again for shooting.
[ Screen for shooting ]
[ Focus to the object and ]
press the AEL button
[ Refocus and fully press ]
the shutter button
You can use the ASM button to select the Aperture Value and Shutter speed in the Manual mode.
Using the ASM button in the M mode
1. Rotate the MODE DIAL to select the M mode.
2. Press the ASM button and the aperture value and
shutter speed are displayed. To select the aperture
value or shutter speed, press the ASM button.
The selected item is then highlighted in red.
3. Rotate the jog dial to select the aperture value and
shutter speed. Press the SHUTTER button to take the
picture.
In the Manual mode, the exposure information will be displayed by pressing the shutter
button down halfway.
42
MF button
Use this button to select the focusing method.
Automatic focusing : Slightly press the shutter to let the camera measure distance to the
object and select the best focusing.
If successfully focused with the slight press of the shutter, the automatic
focusing mark is turned green.
Manual focusing : Where the automatic focusing is not available, for example, in very dark
conditions, use the manual focus. Please be careful when using the
manual focus as the picture can be blurred easily.
Manual focusing.
1. Press the MF button to display the MF bar.
The MF icon is displayed in the bottom of the LCD.
2. Use the jog dial to set the focus distance.
Turn to the left : Move the focus farther.
Turn to the right : Move the focus closer.
Close-up
Long distance
INFORMATION
Focus distance of 0.04~0.25m are only supported in the Wide zoom. If you take a picture
within 0.2m, select the Flash off mode as the flash range is 0.2m or farther.
The focus value displayed in the LCD while manually focusing is measured from the end
of the lens
43
Using the LCD monitor to adjust the camera settings
You can use the menu on the LCD monitor to set up recording functions. In any mode with
the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
on the LCD monitor.
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
(when the green lamp next to the viewfinder blinks)
- When there is no battery capacity.
The following functions are available, depending on the mode you have selected.
The items indicated by
Menu tab
Main menu
are default settings.
Sub menu
Camera working mode
Page
3264X2448
3072X2304
2816X2112
2592X1944
2272X1704
Size
p.49
2048X1536
1600X1200
1024X768
640X480
640X480
320X240
p.49
160x128
Frame Rate
44
30 FPS
15 FPS
p.50
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
Sub menu
Camera working mode
Page
TIFF
Quality
p.50
S.Fine
Fine
Normal
Multi
Metering
p.51
Spot
Single
Shooting
Continuous
AEB
p.52
AFB
Soft
Sharpness
p.53
Normal
Vivid
Normal
B&W
Sepia
Effect
p.53
Red
Green
Blue
Negative
Highlight
Off
Range 1~4
p.54
Off
Special Effect
Composite
2~4 Part
p.55
Horizontal
OSD Information
Off
Photo
Frame
Frame 1~9
Full OSD
Histogram
p.56
Basic OSD Save mode
45
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
Sub menu
Camera working mode
Page
Myset1
Save Myset
Myset2
p.57
Myset3
Myset1
Load Myset
Myset2
p.57
Myset2
Scene
Stabiliser
Night, Portrait, Children,
Landscape, Close-up,
Text, Sunset, Dawn,
Backlight, Fireworks,
Beach&Snow
Off
On
* Menus are subject to change without prior notice.
46
p.58
p.59
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the LEFT
or RIGHT button.
3072
Quality
TIFF
S.Fine
Fine
Normal
Press the LEFT
or RIGHT button.
3027
Metering
NOR
Shooting
Single
Continuous
AEB
AFB
Multi
Spot
3. Use the UP and DOWN buttons to select a sub menu.
Press the UP or
DOWN button.
Effect
Normal
B&W
Sepia
Negative
Press the UP or
DOWN button.
Effect
Effect
Normal
B&W
Sepia
Negative
NOR
Normal
B&W
Sepia
Negative
4. Select a sub menu, and then press the OK button. The value you set will be saved and the
menu will disappear.
Size
You can select the image size appropriate for your application.
Mode
Icon
MOVIE CLIP mode
STILL IMAGE mode
3072
2816
2592
2272
2048
1600
1024
640
640
320
160
Size 3072X2304 2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240 160X128
30FPS
Size
3072X2304
2816X2112
2592X1944
2272X1704
Size
3072
[ PROGRAM mode ]
640X480
320X240
320
160X128
[ MOVIE CLIP mode ]
INFORMATION
The higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
47
Quality
You can select the compression ratio appropriate for your
application of the captured images. The higher the
compression ratio, the lower the picture quality.
3072
Quality
TIFF
S.Fine
Fine
Normal
[ PROGRAM mode ]
STILL IMAGE mode
Mode
MOVIE CLIP mode
Icon
TIFF
Sub menu
TIFF
S. Fine
Fine
Normal
30FPS
15FPS
File Format
tif
jpeg
jpeg
jpeg
avi
avi
INFORMATION
TIFF is the highest quality and Normal is the lowest setting.
Choose the setting appropriate for your needs.
The TIFF file format is for professionals and provides the best quality.
However, large file size reduces number of available pictures to take and increases
saving time to the memory card.
[Please Wait !] message is displayed while saving a TIFF file to the memory card.
If you select the TIFF file format, the double self-timer can’t be selected.
This file format complies with the DCF(Design rule for Camera File system).
JPEG (Joint Photographic Experts Group): JPEG is the image compression standard
developed by the Joint Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it can compress the files
efficiently without damaging the data.
48
Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
Multi (
Spot (
: Exposure will be calculated based on
an average of the available light in the
image area.
However, the calculation will be biased
towards the centre of the image area.
This is suitable for general use.
3072
Metering
Multi
Spot
[ PROGRAM mode ]
: Only the rectangular area in the centre
of the LCD monitor will be metered for
light. This is suitable when the subject in the centre is exposed correctly,
regardless of the back lighting.
49
Continuous shot
You can select continuous shot, AEB (Auto Exposure Bracketing) and AFB (Auto Focus
Bracketing). If you select CONTINUOUS, AEB or AFB, the flash will automatically be set to
Flash Off.
[Single]: Take one picture only
NOR
[Continuous]: Images will be taken continuously until the
shutter button is released. The shooting
capacity depends on the memory.
Shooting
Single
Continuous
AEB
AFB
[ PROGRAM mode ]
[AEB]: You can select the exposure bracket range
( 0.3EV step, 6 steps) by rotating the jog dial.
Three pictures are taken in a series in different
exposure value. Use this menu if it is hard to decide
exposure of the object.
[AFB]: You can select the focus bracket range( 1 step, 3
steps) by rotating the jog dial. Three pictures are
taken in a series in different focus range. Use this
menu if it is hard to decide distance of the object.
NOR
Shooting
Single
Continuous
AEB
AFB
NOR
Shooting
Single
Continuous
AEB
AFB
INFORMATION
If less than 3 pictures are available in the memory, the Sequential and the AEB, AFB
shooting are not available.
If you select 3072X2304 or 2816X2112 image size, the maximum numbers of continuous
shot are 3.
It is best to use a triangular support for the AEB shooting for saving time is long and hand
shaking may occur.
If the [TIFF] or [S. Fine] quality is selected and the [Shooting] sub menu is changed to
[Continuous], [AEB] or [AFB], the image quality is changed to the [Fine] sub menu
automatically.
The self-timer can’t be activated during the continuous shooting.
50
Sharpness
You can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied
only when the captured image is stored on the memory.
NOR
Sharpness
Soft
Normal
Vivid
[ PROGRAM mode ]
Sub menu
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
Soft
The edges of the image are sharp.
This is suitable for printing.
Normal
The edges of the image are emphasized. The edges will appear
sharp, but noise may occur in the recorded image.
Vivid
Effect
By using the camera's digital processor, it is possible to add special effects to your images.
30FPS
Effect
Effect
Normal
B&W
Sepia
Negative
NOR
[ PROGRAM mode ]
Normal
B&W
Sepia
Negative
Normal
B&W
Sepia
Negative
NOR
[ MOVIE CLIP mode ]
: No effect is added to the image.
: Converts the image to black and white.
: Captured images will be stored in a sepia tone (a gradient of yellowish brown
colours).
: Save the image in negative mode.
51
Special Effect
By using the camera s digital processor, it is possible to add special effects to your images.
You can select this menu only in the PROGRAM, MySET, Aperture priority, Shutter priority
and MANUAL modes.
You can select this menu only in the 2592x1944, 2272x1704, 2048x1536, 1600x1200, 1024x768,
640x480 image size. If the [3072X2304] or [2816X2112] image size is selected and one of the
special effect menu is selected, the image size is changed to the [2592X1944] automatically.
You can select the preset focus frame, Composite shots and Photo frame function.
If a special effect is selected, the rest special functions set before are cancelled automatically.
Even if the camera is turned off, the special effect setting will be preserved. To cancel the
special effect, select the [Off] sub menu of each menu.
If you select the [TIFF] image size and select the [Special Effect] menu, the image size will be
changed to the [S.Fine] image size automatically.
If you select a special effect menu and select [Continuous], [AEB] or [AFB] menu, the special
effect menu will be cancelled automatically.
Special Effect : Preset focus frames
You can make the subject stand out from its surroundings. The subject will be sharp and in
focus while making the rest out of focus.
1. Select the PROGRAM, MySET, Aperture priority, Shutter
priority or MANUAL modes. Then press the menu button.
2. Press the LEFT/ RIGHT button and select the [Special
Effect] menu tab.
3. Select the [Highlight] menu by pressing the UP/ DOWN
button and press the Right button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Off] : The preset focus frame will not be added.
[Range 1]
[Range 2]
5. Press the menu button twice and the menu will disappear.
If you select the [Range 1~3] menu, the preset focus
frame area will appear.
52
NOR
Special Effect
Highlight
Composite
Photo Frame
Off
Off
Off
Move :
Change:
[Range 3]
Special Effect : Composite shots
You can combine 2~4 different shots in a still image.
1. Select the PROGRAM, MySET, Aperture priority, Shutter priority or MANUAL modes.
Then press the menu button.
2. Press the LEFT/ RIGHT button and select the [Special
Effect] menu tab.
NOR
Special Effect
3. Select the [Composite] menu by pressing the UP/ DOWN
HighLight
Off
button and press the Right button.
Composite
Off
4. Select a desired sub menu by pressing the UP/ DOWN
Off
Photo Frame
button and press the OK button.
Move :
Change:
- [Off] : cancels the composite shots
- [2 Parts] : 2 different shots are combined in a still image.
- [3 Parts] : 3 different shots are combined in a still image.
- [4 Parts] : 4 different shots are combined in a still image.
5. Press the menu button twice and the menu will disappear.
6. The number of frames you selected in step 4 is displayed on the LCD monitor.
Press the shutter button to start the composite shots.
Selecting 2 composite shots
Pressing the
shutter button
[1/2]
Pressing the
shutter button
[2/2]
[The result image]
INFORMATION
You can use the flash button, self-timer button, macro button, voice memo button, +/button and the Zoom W/T button during the composite shots.
If you change the image size, press the camera buttons (Play mode button, Voice
recording(Pressing the UP button twice)) or rotate the mode dial during the composite shots, the
captured images aren’t saved and the first step of the composite shot will display on the LCD
monitor. Do not press the camera buttons or rotate the mode dial during the composite shots.
The voice memo will start after taking the last composite shot.
53
Special Effect : Photo Frame
You can add 3 types of frame-like borders to a still image you want to capture.
1. Select the PROGRAM, MySET, Aperture priority,
Shutter priority or MANUAL modes. Then press the
menu button.
2. Press the LEFT/ RIGHT button and select the [Special
Effect] menu tab.
3. Select the [Photo Frame] menu by pressing the UP/
DOWN button and press the Right button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Off] : The photo frame will not be added.
[Frame 1]
[Frame 2]
5. Press the menu button twice and the menu will
disappear. If you select the [Frame 1~3] menu, the
preset focus frame area will appear.
54
NOR
Special Effect
HighLight
Composite
Photo Frame
Off
Off
Off
Move :
Change:
[Frame 3]
Save / Load a specific camera configuration (MySET)
Use the MySET mode to save frequently used camera settings (Save Myset) and use it later
(Load Myset)
Saving the camera configuration : Available in the PROGRAM, A, S and M shooting mode.
1. Use the camera buttons and menu to set desired camera configuration.
2. Press the menu button in any mode except AUTO,
VOICE RECORDING, MOVIE CLIP, SCENE and MySET
NOR
Save Myset
mode.
3. Press the Left/Right buttons to select the [Save Myset]
Myset 1
menu tap.
Myset 2
4. Press the Up/Down buttons to select desired MySET slot
Myset 3
number to save.
[ PROGRAM mode ]
5. Press the OK button to save the current configuration in
the selected MySET slot and close the menu.
Loading the saved camera configuration: available in the MySET shooting mode.
1. Turn the mode dial to select the MySET shooting mode
and press the menu button.
3072
2. Press the Left/Right buttons to select the [Load Myset]
Load Myset
menu tap.
Myset 1
3. Press the Up/Down buttons to select a MySET slot
Myset 2
number to load.
Myset 3
4. Press the OK button to set the camera configuration as
saved in the MySET slot.
[ MySET mode ]
* The current MySET slot number is displayed in the top left of the LCD.
INFORMATION
Saving is available for the following camera functions.
Functions using the camera buttons - Macro, flash, white balance, ISO, RGB, Exposure
value, Aperture value and Shutter speed.
Functions using the menu screen
- Size, quality, metering, effect, sharpness and
continuous shot.
55
Scene
Select the [Scene] submenu to automatically configure
optimal settings, depending on the selected scene.
Only available in the SCENE Mode.
3072
Scene
Night
Portrait
Children
Landscape
[SCENE mode]
Sub menu
Icon
Night
Description
Use this for shooting still images at night or in other dark conditions.
Portrait
To take a picture of a person
Children
To take a still picture of moving children
Landscape
Scenery with green woods or blue sky
Close up
Text
Close-up shooting for small objects such as plants and insects
Use this mode to shoot a document
Sunset
For taking pictures of sunsets
Dawn
Daybreak scenes
Backlight
Portrait without shadows caused by backlight
Firework
Firework scenes
Beach&Snow
For ocean, lake, beach and snowscape scenes
INFORMATION
When the close-up, sunset, dawn, fireworks are selected, it is possible that camera shake
will occur. If this is the case, use a tripod to eliminate this.
In the [Children] and [Close up] scene mode, the Continuous Automatic Focusing (CAF)
function will be activated and the CAF icon is displayed at the bottom of the LCD monitor.
Continuous automatic focusing : The camera keeps focusing while the object is moving
even if the shutter button is not slightly pressed. Note that using the Continuous automatic
focusing uses more battery than the Automatic focusing does.
56
Movie Clip frame stabiliser
This function helps stabilise images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
How to use this function
1. Select the MOVIE CLIP mode by rotating the mode dial
and press the menu button. Select the [Stabilizer] menu
NOR
Stabilizer
and press the right button.
2. Select a desired sub menu by pressing the Up/Down
Off
button and press the OK button.
On
[Off] : Movie clip frame stabilizer function becomes
disabled.
[On] : Prevents camera shake during movie recording.
The recording frame range will become narrower than when you select the [Off]
menu. Pre-view frames may not display smoothly on the LCD monitor, but stored
movie clips have no problems.
INFORMATION
When you select the [On] sub menu, the movie clip frame range will be narrow depending
on the movie clip size.
57
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button (
).
The camera can now play back the images stored in the memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
You can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button again to turn off the camera. Switch the mode dial to change to
another shooting mode while the camera is on.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
If you press the PLAY button to switch to Play mode, the camera lens will retract into the
camera body for protection of the lens after about 10 seconds.
Playing back a still image
1. Select the PLAY mode by pressing the play
mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to view by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
INFORMATION
Manner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up
buzzer
sound
andsetting
start-up
tosound
OFF, even
setting
though
to OFF.
you may have set these to ON.
Even if the camera’s power is off, you can start the play mode by pressing the play mode
button.
60
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (
) will be displayed on
the LCD monitor.
4. Press the play & pause button (
) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press
the play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the
RIGHT button.
- To stop playback of the movie clip, press the play &
pause button, and then press the LEFT or RIGHT button.
Movie clip capture function: capture still images from the movie clip.
How to capture the movie clip
Steps 1-2 are the same as those for playing back a still
image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/RIGHT button.
4. Press the Play/Pause button to play the movie clip
5. Press the Play/Pause button while playing the movie
clip. Then press the Shutter button.
6. The paused movie clip is saved in a new file name.
* The captured movie clip file has same size as the original
movie clip (640X480, 320X240, 160X128).
Trim:T
Capture:SH
PLAY
FF
REW
[ Paused ]
[ Press the shutter button ]
61
Starting play mode
On camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play &
Pause button.
3. Press the Pause button at the point of the movie clip
Trim:T
Capture:SH
that you want to start extracting.
PLAY
4. Press the T button. The start point doesn't display on
FF
REW
the status bar, but the start point will be selected.
5. Press the Play button and the extracted range will be
displayed on the status bar.
6. At the point of movie clip that you want to stop
extracting, press the Pause button.
7. Press the T button and a confirmation window will
display.
Trim:T
PLAY
FF
REW
8. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
[Trimming] : The extracted frames are saved as a
new file name.
[Cancel]
: The movie trimming will cancel.
Trimming?
Trimming
Cancel
Confirm : OK
PLAY
REW
INFORMATION
If the running time is under 10 seconds, the movie clip can t be trimmed.
If you want to extract the movie clip at the beginning of the frame, press the Zoom T
button before starting the movie clip.
If the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
If you doesn t specify the ending point of the movie clip, the trimming confirmation
window will display at the point of the last frame.
62
FF
Starting play mode
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (
) will be displayed on
the LCD monitor.
PLAY
4. Press the play & pause button (
) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
63
LCD monitor indicator
■ The LCD monitor displays shooting information about the displayed image.
①
②
⑯
⑮
③
⑭
④
⑬
⑤
⑫
⑪
⑩
⑨
⑧
⑥
⑦
No.
Description
Battery
Play mode icon
Flash
Voice memo
Protect
DPOF icon
Histogram
Recording date
2005/08/01
Exposure Value
EV 0.0
10
ISO
AUTO 50 100 200 400
11
Shutter speed
15 ~ 1/2,000
12
Aperture Value
F2.8 ~ F5.1
13
Sharpness
14
TIFF
15
Image size
16
Folder name & File name
64
Icon
100-0009
Page
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Thumbnail (
) / Enlargement (
) button
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
Thumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement
button (
).
100-0009
Pressing the thumbnail
button (
Pressing the enlargement
button (
Highlighted image
[ Normal display mode ]
[ Thumbnail display mode ]
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- TIFF, Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
65
Thumbnail(
) / Enlargement(
) button
The maximum enlargement rate in proportion to the image size.
Image size
3264 3072
2816 2592
2272 2048
1600
1024
640
Maximum enlargement rate X12.75 X12.0 X11.0 ×10.13 ×8.8 ×8.0 ×6.25 ×4.0 ×2.5
Trimming : You can extract part of the image that you want
and save it separately.
Trimming?
1. Select an image that you want to enlarge and press the
Trimming
Cancel
enlargement button.
Confirm:OK
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
- [Trimming] : The trimmed image will save as a new file name, and display on the LCD
monitor.
- [Cancel]
: The trimming menu will disappear.
* If there is little memory space to save the trimmed image, the image can’t be trimmed.
Voice (
) memo / Up button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (
) and the voice memo
indicator will display. The camera is now ready to record
a voice memo.
START:SHUTTER
66
Voice (
) memo / Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
100-0011
STOP:SHUTTER
4. The recording can be stopped by pressing the shutter
button again.
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause (
100-0011
)/ Down button
In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode
: Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
100-0008
PLAY
[ Voice recording is stopped ]
PAUSE
[ Voice recording is playing ]
100-0008
PLAY
[ Voice recording is paused ]
67
LEFT/ RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button
: While the menu is showing, press the LEFT button to select the menu
tab to the left of the cursor.
- RIGHT button
: While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an secondary menu.
- MENU button
: When you press the MENU button, the play mode menu will be
displayed on the LCD monitor. Pressing it again will return the LCD to
the initial display.
- OK button
: When the menu is displayed on the LCD monitor, the OK button is used
for confirming data that is changed by using the 5 function button.
Voice (
) memo/ Up button
■When the camera is connected to a PictBridge Printer
with supplied USB cable, currently displayed image will
be printed with the printer's default setting by pressing
this button.
- Refer to page 00 for more information about how to
connect the computer and the printer.
68
Delete (
) button
This deletes images stored on the memory card.
Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE (
button.
2. A message will display as shown alongside on the LCD
monitor.
3. Select the submenu values by pressing the UP/DOWN
button and then press the OK button.
If [Delete] is selected: deletes the selected images.
If [Cancel] is selected: cancels "Delete Image".
100-0009
Delete?
Delete
Cancel
Confirm:OK
Deleting Images in Thumbnail Display Mode
1. Use the Up/Down/Left/Right buttons to select an image to delete.
2. Press the Delete button to display the following message in the LCD monitor.
3. Select the submenu values by pressing the UP/DOWN button and then press the OK
button.
If [Delete] is selected: deletes the selected images.
If [Cancel] is selected: cancels "Delete Image".
Press the
DELETE
button.
Delete?
Delete
Cancel
Confirm:OK
INFORMATION
Before deleting images from the camera, you should protect (p.77) or download images
(p.121) to your computer that you wish to keep.
69
Album button (MF button)
You can organise the captured still images(except for the
TIFF file type image) into albums by using the MF button.
This camera has 8 albums and each album can take up
to 100 images.
The album menu loading time depends on the memory
card type.
How to use the album
Selecting the album
1. In the play mode, press the MF button.
All
A1
A2
A3
A4
A5
A6
A7
A8
Select
Slide
Add
2. Select the [Select] menu by pressing the Up/Down
button and press the Right button.
3. Select a desired album by pressing the
Up/Down/Left/Right buttons and press the OK button.
Remove
Exit:MENU
Move :
All
A1
A2
A3
A4
A5
A6
A7
A8
Select
Slide
Add
Remove
Set : OK
Inserting still images into the album
1. Select an album.
2. Select the [Add] menu by pressing the Up/Down
button and press the Right button.
A4
Select
Slide
Add
Remove
Select:T
70
Set:OK
Album button (MF button)
3. Select the still images you wish to add by pressing the
Up/Down/Left/Right buttons and press the Zoom T
button.
marks are displayed on the selected images.
* To cancel the selection, press the Zoom T button again.
A4
Select
Slide
Add
Remove
Select:T
4. Press the OK button and a confirmation window will
display. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
[Add] : Inserts the selected images into the album.
[Cancel] : Cancels the inserting images.
Set:OK
A4
Select
Slide
Add
Remove
Add?
Add
Cancel
Confirm:OK
Select:T
Removing still images from the album
1. Select an album.
2. Select the [Remove] menu by pressing the Up/Down
button and press the Right button.
3. Select a desired sub menu and press the OK button.
- [Select] : Specific still images in the album can be
removed.
- [All]
: All of the still images in the album will be
removed.
If [Select] is selected :
- Select images that you want to remove by pressing the
Up/Down/Left/Right buttons and press the Zoom T
button.
marks are displayed on the selected images.
4. Press the OK button and a confirmation window will
display.
Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Remove] : Removes the selected images from the
album.
[Cancel] : Cancels the removing images.
* The removed images are not deleted from the memory,
but just removed from the album.
A4
Set:OK
Select
Select
All
Slide
Add
Remove
Set : OK
A4
Select:T
Set:OK
A4
Remove?
Remove
Cancel
Confirm:OK
Select:T
Set:OK
71
Album button (MF button)
Playing back the albums
Playing back all of the albums
1. Select [All] menu and press the OK button.
All of the albums will be selected.
2. Select the [Slide] menu by pressing the Up/Down button
and press the Right button.
You can select [Start], [Interval], [Repeat] and [Effect]
menus.
- [Start] : Start the slide show
- [Interval] : Set the slide show play interval
- [Repeat] : Choose to repeat the slide show after
finishing the first cycle.
- [Effect] : Unique screen effects can be used for the
slide show.
3. Select the [Start] menu by pressing the Up/Down button
and press the OK button to start the slide show.
4. To stop the slide show, Press the Play & Pause buttn
and MENU/OK button.
Playing a desired album
1. Select a desired album and press the OK button.
2. Select the [Slide] menu by pressing the Up/Down button
and press the Right button.
You can Select the [Start], [Interval], [Repeat] and
[Effect] menu.
All
A1
A2
A3
A4
A5
A6
A7
A8
Select
Slide
Add
Remove
Exit:MENU
Move :
Start
Select
Interval
1 Sec
Slide
Repeat
Off
Add
Effect
Cancel
Remove
Move:
Set:OK
A4
All
A1
A2
A3
A4
A5
A6
A7
A8
Select
Slide
Add
Remove
Exit:MENU
3. Select the [Start] menu and press the OK button to start
the slide show.
4. To stop the slide show, press the Play & Pause buttn
and MENU/OK button.
A4
Move:
Start
Select
Interval
1 Sec
Slide
Repeat
Off
Add
Effect
Cancel
Remove
Move :
INFORMATION
If an image is deleted from the memory, the image doesn’t display on an album.
An image can’t be added twice into the same album.
An image can be added into the different albums.
72
Set:OK
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set
up in Play mode are as follows. To capture an image after setting up the play menu, press
the PLAY mode button or shutter button.
Menu tab
Main menu
Slide Show
Sub menu
Secondary menu
Start
Interval
1, 3, 5, 10sec
Repeat
Off, On
Effect
Protect
Delete
Resize
Effect
Rotate
Select
Page
p.78
Cancel
Effect 1~4, Mix
Unlock/ Lock
All
Select
All
3072 X 2304
2816 X 2112
2592 X 1944
2272 X 1704
2048 X 1536
1600 X 1200
1024 X 768
640 X 480
User Image
B&W
Red
Sepia
Green
Negative
Blue
Right 90º
Left 90º
180º
Horizontal
Vertical
p.80
p.81
p.82
p.83
p.84
73
Setting up the play back function using the LCD monitor
Menu tab
Main menu
DPOF
Copy To Card
Sub menu
Secondary menu
Standard
Select/ All/ Cancel
Index
No/ Yes
Size
Select/ All/ Cancel
No
Yes
Page
p.84
p.87
Full OSD
OSD Information
Image Information
None
Save Mode
This menu is available while the camera is connected to a PictBridge supporting printer
(direct connection to the camera, sold separately) with a USB cable.
Menu tab
Main menu
Images
Auto Set
Sub menu
Secondary menu
One Pic
All Pics
No
Yes
Auto
Postcard
Card
4X6
Custom Set
Paper Size
2L
Letter
A4
A3
74
Page
p.89
p.90
Setting up the play back function using the LCD monitor
Menu tab
Main menu
Sub menu
Secondary menu
Page
Auto
Full
Layout
p.90
16
Index
Auto
Custom Set
Paper Type
Normal
Photo
Fastphoto
Auto
Quality
Draft
Plain
Fine
p.90
Auto
Date
Off
On
Auto
File name
Off
On
Print
DPOF Print
Reset
Standard
Index
No
Yes
No
Yes
p.91
p.91
p.92
Menus are subject to change without prior notice.
75
Starting the slide show
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Slide]
menu tab.
Slide
Start
Interval
Repeat
1 sec
OFF
Start the slide show: The slide show can start only in the
Exit: MENU
Move :
[Start] menu.
1. Use the Up/Down buttons to select the [Start] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
) again to resume the slide show.
- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHT
button.
Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHT
button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
Repeat setting : setting the slide show to repeat after the first cycle.
1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[On] selected : The silde show is repeated until cancelled.
[Off] Selected : The slide show is closed after one cycle.
3. Press the OK button to save the configuration.
INFORMATION
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a MOVIE file is displayed.
76
Starting the slide show
Configure slide show effects: Unique screen effects can be used for the slide show.
1. Select the [Effect] sub menu by pressing the UP/ DOWN
button and press the RIGHT button.
2. Use the Up/Down Button to select the type of effect.
Interval
[Cancel] : Normal display.
Repeat
[Effect 1] : Image is displayed slowly.
Effect
[Effect 2] : Image is displayed slowly from the centre
Back:
outwards.
[Effect 3] : Image moves from the top left.
[Effect 4] : The image slides diagonally from top left to bottom right.
3. Press the OK button to confirm the setting.
Slide
Cancel
Effect1
Effect2
Set : OK
Protecting images
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Protect]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to be
protected/released is displayed.
- Up/Down/Left/Right : Select an image
- Zoom W/T Button : Protect/release the image
- Menu Button : Your changes will be saved and the
menu will disappear.
[All Pics] : Protect/release all saved images
- Zoom W/T Button : Protect/release the images
- Menu Button : Your changes will be saved and the
menu will disappear.
Protect
Select
All Pics
Exit: MENU
Unlock
SET:OK
Lock
SET:OK
Move :
77
Protecting images
- If you protect an image, the protect icon will be displayed
on the LCD monitor. (An unprotected image has no
indicator)
- An image in LOCK mode will be protected from the
delete function or [Delete] functions, but will NOT be
protected from the [Format] function.
Deleting images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images.
Important shots should be stored on a computer before deletion takes place. The startup
image is stored in the camera's internal memory (i.e., not on the memory card) and it will not
be deleted even if you delete all files on the memory card.
Deleting images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Delete]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select]: Selection window for an image to delete is
displayed.
- Up/Down/Left/Right: Select an image
- Zoom T Button: Select the image for deletion.
( mark)
- OK Button: Press the OK Button to display the
confirmation message. Select the [Delete]
menu and press the OK Button again to
delete
marked images.
[All Pics] : Displays confirmation window. Select the
[Delete] menu and press the OK button to
delete all unprotected images. If there are no
protected images, a [No Image!] message will
display.
4. After deletion, the screen will be changed to the play
mode screen.
78
Delete
Select
All Pics
Exit: MENU
Move :
Select:T
Del:OK
Delete?
Delete
Cancel
Confirm:OK
Del:OK
Resize
Change the resolution (size) of pictures taken. Select the [User Image] to save an image to
be the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Resize]
menu tab.
Resize
2816X2112
3. Select a desired sub menu by pressing the UP/ DOWN
2592X1944
button and press the OK button.
2272X1704
Exit: MENU
Move :
● Image Resize Types
Resize
3072X
2304
2816X
2112
2592X
1944
2272X
1704
2048X
1536
1600X
1200
1024X
768
640X
480
User
Image
8M
7M
6M
5M
4M
3M
2M
1M
VGA
INFORMATION
A large sized image can be resized to a smaller sized image, but not vice versa.
Only JPEG images can be resized.
TIFF, Movie clip(AVI) and Voice recording(WAV) files can’t be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name. The [User Image] image is stored not on the
memory card but on the internal memory.
Only two [User Image] images can be saved. If you save a new [User Image] image, the
existing startup image will be deleted in order.
If the memory capacity is insufficient to store the resized image, a [Card Full!] message
will display on the LCD monitor and the resized image will not be stored.
79
Rotating an image
You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it will switch back to the original state.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Rotate]
Rotate
menu tab.
Right 90˚
3. Select a desired sub menu by pressing the UP/ DOWN
Left 90˚
button.
180˚
4. Press the OK button and the rotated image will be
Exit: MENU
Move :
displayed. If you display the rotated image on the LCD
monitor, empty spaces may appear to the left and right of the image.
[Right 90 ] : Rotate picture in
a clock-wise
direction
[Left 90 ] : Rotate picture in a
counter clockwise direction
[Horizontal] : Rotate picture
horizontally
80
[180 ] : Rotate picture 180
degrees
[Vertical] : Rotate picture
vertically
DPOF
DPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
DPOF : STANDARD
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Standard] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select]: Selection window for an image to print is
displayed.
- Up/Down/Left/Right: Select an image to print.
- Zoom W/T Button: Select the number of prints.
[All Pics] : Configure number of prints for all pictures
except movie and voice files.
- Zoom W/T Button: Select the number of prints.
[Cancel] : Cancel the print setup.
5. Press the OK button to confirm the setting. If an image
carries DPOF instructions, the DPOF indicator (
will show.
DPOF
Standard
Index
Size
Select
No
Select
Exit: MENU
Move :
0 Prints
Set:OK
0 Prints
Set:OK
81
DPOF : INDEX
Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
Standard
3. Select the [Index] menu by pressing the UP/ DOWN
Index
No
button and press the RIGHT button.
Size
Yes
4. Select a desired sub menu by pressing the UP/ DOWN
Back:
Set : OK
button.
If [No] is selected
: Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
DPOF : PRINT SIZE
You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Size] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to be changed
printed size is displayed.
- Up/Down/Left/Right : Select an image.
- Zoom W/T Button : Change the print size.
- OK button : Your changes will be saved and the menu
will disappear.
[All Pics] : Change print size of all saved images
- Zoom W/T button : Change the print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
* DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7,
8X10
82
DPOF
Standard
Index
Size
Select
All Pics
Cancel
Back:
Set : OK
Cancel
Set:OK
Cancel
Set:OK

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:08:16 15:58:41+09:00
Create Date                     : 2005:08:16 15:58:25+09:00
Title                           : v800en_c_V19
Author                          : samyoung
Creator                         : QuarkXPress(MAC): LaserWriter 8 8.3fc2
Producer                        : Acrobat Distiller 5.0.2 (Macintosh)
Page Count                      : 40
Mod Date                        : 2005:08:16 15:58:41+09:00
Creation Date                   : 2005:08:16 15:58:25+09:00
Metadata Date                   : 2005:08:16 15:58:41+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools