Hanwha Techwin PRO815 Digital Camera User Manual H1 en c v03
Samsung Techwin Co Ltd Digital Camera H1 en c v03
Contents
Users Manual 1 of 7
User’s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. ENGLISH Instructions ■ Use this camera in the following order Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.96) Take a picture. (p.20) Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.102) Check the camera’s power. If the power is turned off, press the camera button to turn it on. (p.31) Open Window’s EXPLORER and search for [Removable Disk]. (p.103) ● If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer holds no responsibility for loss or damage of images on the memory card due to the use of a card reader. 《2》 Contents READY ●Getting to know your camera ●Danger ●Warning ●Caution ●An FCC warning ●System chart ●Identification of features ■Front & Top ■Back & Bottom ■Bottom/ 5-function button ■Cradle ■Self-timer lamp ■Camera Status Lamp ■Mode icon ●Connecting to a Power Source ■Using the SAC-41 ■Using the battery ■Removing the battery ●Instructions on how to use the memory card ●Inserting the memory card ●Removing the memory card ●When Using the Camera for the First Time 10 10 10 11 11 12 12 12 13 14 18 18 19 21 21 22 RECORDING ●LCD monitor indicator ●Changing the recording mode ■Selecting the [Mode] menu ■How to use the Auto mode ■How to use the Movie clip mode ■Recording the movie clip without voice ■Using Successive Recording ■How to use the Manual mode ■How to use the Scene modes ■How to use the VOICE RECORDING mode 23 24 24 26 26 27 27 27 28 29 ■How to use the SF mode 29 ●Things to Watch Out for When Taking Pictures 30 ●Using the camera buttons to adjust the 31 camera ■POWER button 31 ■SHUTTER button 31 ●ZOOM W/T button 31 34 ●Voice recording/ Voice memo/ UP button ●Macro/ Down button 35 ●Focus lock 36 ●Flash/ Left button 37 ●Self-timer/ Right button 39 40 ●MENU/ OK button ●M (Mode) button 40 ●SF button 42 ●+/- button 43 ●Using the LCD monitor to adjust the camera 47 settings ●How to use the menu 49 49 ●Mode ●Mode Set 50 ●Size 51 ●Quality / Frame rate 52 ●Metering 53 ●Continuous shot 53 ●Sharpness 54 ●OSD information 54 ●Effect 55 ●Special Effect 56 ●Special Effect : Preset focus frames 56 ●Special Effect : Composite shooting 58 ●Special Effect : Photo Frame 60 ●Movie Clip frame stabiliser 61 PLAY ●Starting play mode ■Playing back a still image 62 62 《3》 Contents ■Playing back a movie clip 63 ■How to capture the movie clip 63 ■On camera movie trimming 64 65 ■Playing back a recorded voice ●LCD monitor indicator 66 ●Using the camera buttons to adjust the camera 67 ■Play mode button 67 68 ●Thumbnail/ Enlargement button ●Voice memo/ Up button 69 ●Play & Pause/ Down button 70 ●Delete button 71 ●Left / Right / Menu / OK button 72 73 ●Album button ●Setting up the play back function using the LCD monitor 76 ●Starting the slide show 79 ●Protecting images 81 82 ●Deleting images ●Resize 83 84 ●Effect ●Rotating an image 85 ●DPOF 85 ●DPOF : Standard 86 ●DPOF : Index 86 ●DPOF : Print size 87 ●Copy To Card 88 ●PictBridge 89 ●PictBridge : Picture Selection 90 ●PictBridge : Print Setting 91 ●PictBridge : Printing 92 ●PictBridge : RESET 93 SETUP ●Setup menu ●File name ●Auto power off ●Language 《4》 94 95 96 97 ●Formatting a memory card ●Setting up the Date/ Time/ Date type ●Imprinting the recording date ●Sound ●Connecting an External Device (USB) ●Auto Focus lamp ●LCD brightness ●Selecting Video out type ●Quick view ●Initialisation ●Setting up the Mycam menu ●Start up image ●Start up sound ●Shutter sound ●Important notes ●Warning indicator ●Before contacting a service centre ●Specifications 97 98 98 99 99 100 100 101 103 103 104 104 105 105 106 108 109 112 SOFTWARE ●Software Notes ●System Requirements ●About the software ●Setting up the application software ●Starting PC mode ●Removing the USB Driver for Windows 98SE ●Removable Disk ●Removing the removable disk ●Setting up the USB Driver for MAC ●Using the USB Driver for MAC ●Digimax Viewer 2.1 ●Digimax Reader ●Using PhotoImpression ●FAQ 114 114 115 117 127 130 131 132 133 133 134 135 137 139 Getting to know your camera Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly. ● When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. ● Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no responsibility for any loss or damages that may result from camera malfunction. ● Keep the manual in a safe place. Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation incorporated in the United States and/or other countries. CompactFlash logo is registered trademarks of SanDisk Corporation. All brand and product names appearing in this manual are registered trademarks of their respective companies. This manual contains instructions on using this camera that will help you to use this camera safely and correctly. This will help prevent danger and injury to others. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in a minor or moderate injury. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. 《5》 Information to the user NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Danger ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. ■ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source (batteries or AC Power Adapter). You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a fire or electric shock. ■ Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a fire or electric shock. ■ Do not operate this camera with wet hands. This could pose a risk of electric shock. Warning ■ Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes, may cause eyesight damage. ■ When taking photographs, never point the lens of the camera directly into very strong light. This may result in permanent damage to your eyesight. ■ For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.: •Swallowing batteries or small camera accessories. If an accident should occur, please consult a doctor immediately. •There is the possibility of injury from the camera’s moving parts. ■ Batteries and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool. ■ Do not recharge non rechargeable batteries. This may cause an explosion. ■ Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to extreme temperatures may adversely affect the camera’s internal components and could cause a fire. ■ When in use, do not cover the camera or AC Power Adapter. This may cause heat to build up and distort the camera body or cause a fire. Always use the camera and its accessories in a well-ventilated area. 《6》 Caution ■ Leaking, overheating, or burst batteries could result in fire or injury. •Use batteries with the correct specification for the camera. •Do not short circuit, heat or dispose of batteries in fire. •Do not insert the batteries with the reverse polarities. ■ Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and permanently damage the camera's components. ■ Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns. ■ Do not move the camera while it is switched on, if you are using the AC Power Adapter. After use, always switch off the camera before unplugging the adapter from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock. ■ The Lens is attached to the camera body. Do not drop or press the lens by force. It may cause a camera malfunction. ■ Do not pull the lens by hand or do not rotate the zoom ring quickly. It may cause a camera malfunction. Please be careful when using the lens. 《7》 System chart Please check that you have the correct contents before using this product. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case DPOF compatible printer(see p.00) Flash plate AC adapter 《8》 User manual, Warranty card Camera strap Remote controller Software (p.00) CF (CompactFlash) card (p.00) Exclusive bounce flash Lens adapter Lens hood Lens cap AC cord Battery charger Rechargeable battery (SLB-1974) System chart System Requirements Computer (p.00) USB cable PictBridge compatible printer(see p.00) AV cable For Windows •PC with processor better than Pentium II 450MHz (Pentium 700MHz or better is recommended) •Windows 98/ 98SE/ 2000/ ME/ XP •Minimum 64MB RAM (XP : 128MB) •200MB of available hard-disk space (Over 1GB is recommended) •USB port •CD-ROM drive •1024x768 pixels, 16-bit colour display compatible monitor (24-bit colour display recommended) •DirectX 9.0 or later For Macintosh •Power Mac G3 or later •Mac OS 10.0 or later •Minimum 64MB RAM •110MB of available hard-disk space •USB port •CD-ROM drive External monitor Yellow cable - Video, White/Red colour - Stereo voice (see p.83) 《9》 Identification of features Front AF passive sensor Self-timer lamp & Auto Focus lamp Shutter button Front Jog dial (JOG 1) Microphone Remote control sensor Lens Microphone Side (Left/ Right) AF loc (AF-L) button Pop-up flash (OPEN) button/ Flash compensation button Remote control sensor Flash High Speed shutter (HS) button Focus area selection (AF-A) button Focus mode selection button Speaker Connector cover Side (Left) 《10》 Memory card slot cover Side (Right) Identification of features Top Zoom ring Zoom scale indicator Focus ring Flash EVC (Exposure Value Compensation) ring Hot shoe Shutter button Flash status lamp Drive button ISO button Mode dial Metering button Speaker Power button/ Power lamp Top LCD Self-timer button Hot shoe cap 《11》
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:08:16 18:02:42+09:00 Create Date : 2005:08:16 18:02:09+09:00 Title : H1_en_c_v03 Author : samyoung Creator : QuarkXPress(MAC): LaserWriter 8 8.3fc2 Producer : Acrobat Distiller 5.0.2 (Macintosh) Page Count : 12 Mod Date : 2005:08:16 18:02:42+09:00 Creation Date : 2005:08:16 18:02:09+09:00 Metadata Date : 2005:08:16 18:02:42+09:00EXIF Metadata provided by EXIF.tools