Hanwha Techwin SEM3053WN DUAL-MODE BABY MONITOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3257149
Application ID	RUKv+6T/n2D7ipwOt7gjEA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	350.13kB (4376640 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2017-01-12 00:00:00
Creation Date	2016-12-23 11:48:38
Producing Software	3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com)
Document Lastmod	2017-01-11 17:21:37
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

BrightVIEW
User Manual
SEW-3057W.indd
2016-12-23
11:48:39
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
3.
Heed all warnings.
2.
4.
5.
6.
7.
8.
9.
BrightVIEW
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
User Manual
10. Protect the power cord from being walked on or pinched particularly at plugs,
Copyright
11. Only use attachments/ accessories specified by the manufacturer.
©2016 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this
manual are the registered trademark of their respective company.
convenience receptacles, and the point where they exit from the apparatus.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced,
distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
document, but no formal guarantee shall be provided. Use of this document and the subsequent results
shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the right to change the
contents of this document without prior notice.
SEW-3057W.indd
2016-12-23
11:48:40
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY
TERMS
FCC Caution :
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note :
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and monitor.
• Connect the equipment into an outlet on a circuit different from that to which the monitor is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
• STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords
within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
• Some adult assembly or installation required.
• This product contains small parts that may cause choking. Keep small parts away from children.
• This product is NOT intended to replace proper supervision of children. You MUST check your
child’s activity regularly, as this product will not alert parents to silent activities of a child.
• Before using this product, read and follow all instructions contained in this booklet, and read and
follow all instructions and warnings on the product.
SEW-3057W.indd
• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet
basement, etc.
• This product is intended for indoor use only.
• This product is not intended for use as a medical monitor and its use should not replace adult
supervision.
• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a
child. If the child moves outside of this range, if may not be able to detect sounds from him or her.
• It is essential that you check the operating range and condition of the transmitter monitor on initial
installation, and on a regular basis after that.
• Check reception regularly. Test monitor before use and after changing camera location.
The wireless signal transfer range may be shortened if an obstacle such as a
concrete wall is in between the camera and monitor.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight
and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and
other appliances that produce heat (e.g., amplifiers, televisions and stereos).
• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that
may block ventilation.
• Use only the AC adapters provided with the product, as other adapters may damage the product.
Plug the adapters only into standard household current (100~240 volts AC).
Place the AC adapters avoiding pinch points otherwise you can damage the adapters.
• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC
adapter’s cord.
• Do not use extension cords with the AC power adapters to avoid entanglement.
• This product should only be serviced by qualified and authorized Hanwha Techwin service centers.
• Images and sounds are transmitted by the product over public airwaves and transmissions may
be picked up by other units. (Although the transmission distance is 100m or longer, it may vary
depending on whether there are obstacles between the camera and the monitor.)
• Caution if you use the system to watch a young child, do not place the camera where the child
can reach.
• When using the system with only battery power and the charge is low, then the picture and or
sound may affected.
• If this occurs then please connect the AC power adapter.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
FCC Radiation Exposure Statement for Wireless Camera
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2016-12-23
11:48:40
Contents
WHAT’S INCLUDED
Package Contents…………………………………………………… 5
GETTING STARTED
Functional Description………………………………………………… 6
Powering your monitor………………………………………………………… 6
Operating the System………………………………………………………… 6
VIEWING MODE DISPLAY
Indicator Description………………………………………………… 8
How to use the indicator……………………………………………………… 8
Menu Operation…………………………………………………… 10
INSTALLATION
How to Install………………………………………………………… 15
Wireless Monitor……………………………………………………………… 15
Wireless Camera……………………………………………………………… 15
REMOTE VIEW
Remote……………………………………………………………… 16
APPENDIX
Specifications……………………………………………………… 18
Troubleshooting…………………………………………………… 19
How to use the function tools………………………………………………… 10
How to use the setup icon…………………………………………………… 11
OVERVIEW
Getting to know your Monitoring system………………………… 12
Wireless Monitor……………………………………………………………… 12
Wireless Camera……………………………………………………………… 14
Wireless Wrist Band…………………………………………………………… 15
Sensor………………………………………………………………………… 15
SEW-3057W.indd
2016-12-23
11:48:40
01
What’s Included
What’s Included
Package Contents
The system comes with the following components:
Wireless camera
Wireless monitor
User Manual & Warranty Card
Camera Adapter
Monitor Adapter
Plastic anchor (1EA) & Screw (1EA)
Wireless wrist band
Wrist band Adapter
Sensor
Check your package to confirm that you have received the complete system, including all components shown above.
English · 5
SEW-3057W.indd
2016-12-23
11:48:45
Getting Started
Operating the System
Functional Description
Powering your monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge
as needed.
Wireless Monitor
You can use the device while charging with connected adapter, and the device is
portable if charged.
Wireless Camera
The basic operation is as follows:
Camera and Monitor pairing
The units already come paired for your convenience. This button is
used to add an additional camera. User can select camera number
to assign. Up to 4 Cameras may be paired.
PAIR
1.
Power on wireless monitor and wireless camera.
2.
Touch the live view screen on the monitor, and then the settings icon will appear.
3.
Press the [
] button on the monitor.
4.
Select [
] icon.
5.
Select camera number.
The monitor search a camera which sets to pairing mode.
A count down clock appears at the middle of screen which starts counting from
30 to 0.
6.
Press the [PAIR] button on the camera bottom.
7.
Within 30 seconds, if the monitor successfully pairs with the camera, the monitor
will automatically switch to the camera's current view.
Monitor and wrist band pairing
1.
Make sure the monitor should be power.
The Wireless Camera must be plugged in at all times in order to view.
2.
Touch the view screen on the monitor, and then the setting icon will appear.
Wireless wrist band
3.
Press the [
] button on the monitor, come into "Menu" interface.
4.
Select [
] icon, mark sure the Bluetooth should be show [
5.
The monitor will search the Bluetooth device. Choose the Bluetooth and if pairing
negative
positive
negative
The wireless wrist band must be charging with adapter and the device is portable if
charged.
success, the monitor will show Paired and the Bluetooth will show “ [
in the wrist band.
] .
] “ icon
6 · Getting Started
SEW-3057W.indd
2016-12-23
11:48:48
Voice activated (VOX)
Sound level
• Low Sound Level Detection : Sets to higher sensitivity.
• High Sound Level Detection : Sets to lower sensitivity.
Night Light
Multi camera mode
Press [ / ] switch the split mode.
According to the paired camera, screen split mode is different. When
two cameras are paired, it displays as 2-split mode.
When there are more than 2 cameras are paired, it displays as 4 split
mode.
Up to 4 cameras can be paired.
SEW-3036W
Out of Range
If the monitor is outside of transmission range with the paired
camera, the “Out of Range” message appears with warning beeps
at regular intervals.
Touch the [
] button on the camera to remotely activate or
deactivate the night light on the camera.
[Camera]
Remote PTZ and Zoom
You can remotely control the camera to pan, tilt and digital zoom.
Use [
] icons on the wireless monitor to control the camera.
Use [
] icon to zoom in and out.
Getting Started
Remark:VOX on, and once VOX trigger, the Bluetooth will alert and shake for Dozens of
seconds. You can stop the alert by press the Bluetooth button at the side of Bluetooth.
Once the wristband go beyond of the limit distant of Bluetooth, it will alert for several
seconds, then you can stop alert by pressing the Bluetooth button.
The louder the sound around the camera, the more LEDs turn on.
02
Select to monitor significant sound with reduced ambient noise.
The screen goes off in “VOX” mode if there is no significant sound
louder than a certain level about 30 seconds. Meanwhile, the monitor
screen turns on as soon as detecting sound around the camera. In
“VOX” mode, you can set the sensitivity.
Sequence View
Press the "Sequence View"button, it switches to cam1 viewing.After
10 seconds, it automatically switches to cam2 for another 10 second.
Util largest cam number is viewed for 10 seconds, then it loops back
to view cam1 again.
Two-way talk
Press the [
] icon while talking.
English · 7
SEW-3057W.indd
2016-12-23
11:48:51
Viewing Mode Display
e Remote View
Remote access with free Apps for smartphone.
f SD card status
Indicator Description
b c
e fghijk 12
13
14
aS
 ignal Indicator
Unsupport SD card
g x1/x1.5/x2 Zoom mode
How to use the indicator
No SD card
17 16
15
Indicates that current screen is Zoomed in. Press [
zoom back out.
SD card
] icon on the monitor to
h Night Vision Indicator
Indicates camera night vision mode is turned on.
The screen will appear in Black/White in this mode.
i VOX On
Indicates remaining battery charge. Indicated in 4 levels, and one discharge
warning.
j Monitor Speaker Mute
Indicates the monitor speaker is muted. Once the monitor’s speaker is muted,
no sound from the camera is produced.
k Bluetooth
Indicated the Bluetooth turn on or off.
12 Battery Capacity Level
The signal indicator shows the strength of the signal being received from the
camera.
The number of bars in the signal indicator shows the strength of the signal –
One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.
Indicates remaining battery charge. Indicated in 4 levels, and one discharge
Charging: Indicates the battery is charging by DC input power.
warning.
If battery nearly empty, it will flash to alert user to charge up the unit.
Displays the time that is set on the monitor. It only provides AM / PM time
format and no 24hour format.
A remind for Feed time counter.
b Digital Clock
cC
 amera Number
Indicates which camera is being displayed on the current screen. When scan mode
is selected, this icon will flash.
d Sound level Indicator
Indicate the sound level of the Active Camera.
13 Feed time
14 Two-way talk
Press the [
] icon while talking.
15 Air quality display
Indicates air quality display good or normal or bad according to the sensor.
8 · Viewing Mode Display
SEW-3057W.indd
2016-12-23
11:48:56
16 Humidity Display
Indicates the percent of air humidity according to the sensor.
Humidity Alert range : below 45% ‐ above 65%
17 Temperature Display
Indicates the temperature value according to the sensor.
No Signal Warnings
03
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
Viewing Mode Display
English · 9
SEW-3057W.indd
2016-12-23
11:48:56
b -1 Photo Diary
Menu Operation
How to use the function tools
Press the screen of the monitor to display the menu screen.
If you choose date, it will show the baby's photo.
b -2 Pair / Unpair Camera
The LCD suppor up to 4 cameras, you can choose the camera to pair with the
monitor or unpair.
b -3 Settings
You can setting Vox, date & time, feed timer, phto diary setting and brightness.
Detail please refer to page 11
b -4 Bluetooth
you can see the bluetooth connected on or not.
b -5 Night Light On/Off
You can remote the night light. it show the night light on or off.
a Navigation Controls
Using the navigation [
b Menu Setting
c de
] icons, you can control camera angle.
Menu setting mode is including monitor and camera settings.
b-1 b-2 b-3
cM
 onitor Volume
Using the [
] icons, you can adjust the monitor volume.
d Zoom IN / Zoom Out
When x1/x1.5 Zoom mode, the magnifier icon is [
] inside, means press this icon
will zoom in video image. When x2 Zoom mode, the magnifier icon is [
] inside,
means press this icon will zoom out video image.
e Lullaby
Press the icon to turn on and turn off lullabies.
b-4 b-5
10 · Viewing Mode Display
SEW-3057W.indd
10
2016-12-23
11:49:01
Settings
How to use the setup icon
Press the [
e B
 rightness
Settings
Adjusts the brightness of the image shown. If you are using multiple camera,
you can adjust the brightness of each individual camera..
] icon to save the changes and return to previous menus.
To return to the Live screen, press the [
] icon.
f Environment Sensor
a b c d
Show the temperture, humidity and air quality, once out of the limit, it will alert.
Settings
Settings
03
e f g
g Set Camera Speaker Volume
Adjust the volume of the speaker on the camera in this menu. The volume can
be adjusted from 0 to 5, with 5 being the loudest setting and 0 is mute.
h Reset
Settings
Choose  to reset the monitor to factory defaults.
All settings except for time and date information will be reset to the factory
a V
 ox
Setting low or high sound level dectection. Detail please refer to page7.
defaults.
Settings
] or [
] icon to
Settings
c Feed Timer
Settings
Set the feed time shown on the monitor. Use the [
the numbers in the selected field.
d Photo Diary Setting
] or [
You can set your baby's birthday and capture time. Use the [
icon to change the numbers in the selected field.
Viewing Mode Display
Settings
Set the date & time shown on the monitor. Use the [
change the numbers in the selected field.
Humidity range : below 45% ‐ above 65%
Air quality : above 200μg.
bD
 ate & Time Setting
Sensor Alert range (can’t change by users)
] icon to change
] or [
If you set the capture time, the camera will take photo only one a day, and if you
do not satisfied with the photo of the day, you can reset the capture time, the
intraday photo will automatically overwrite.
English · 11
SEW-3057W.indd
11
2016-12-23
11:49:04
Overview
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Monitor Antenna
Receives and sends signals from or to the camera.
Microphone
Transmits audio to the camera when [
] icon is
pressed down and receives sound for the area near the
camera.
5” LCD Screen
Displays video from the camera.
—— Navigation Controls
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [
] or [
] icon to adjust camera’s framing upwards or downwards.
• Press the [ ] or [ ] icon to adjust camera’s framing to the left or right.
• Press [
] icon to zoom in/out the screen.
While in zooming, use [
] icon to move the screen around.
Menu Mode: Press the [
] icon to confirm the menu selection.
12 · Overview
SEW-3057W.indd
12
2016-12-23
11:49:05
Back Controls
Power On/Off
Turn on/off the wireless monitor.
Mirco SD
SD card external storage, up to 32GB supported
Kick Stand
Use to hold the monitor onto a table.
Speaker
Produces the sound transmitted from the camera(s).
DC 5V Power Input
04
Connect the included AC power adapter to power and/or
charge the monitor battery. (when the monitor is not placed
in the optional Charge cradle).
Overview
Side Controls
Power On/Off
Turn on/off the wireless monitor.
Mirco SD
SD card external storage, up to 32GB supported
DC 5V Power Input
Speaker
Produces the sound transmitted from the camera(s).
Connect the included AC power adapter to power and/or
charge the monitor battery. (when the monitor is not placed
in the optional Charge cradle).
nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
English · 13
SEW-3057W.indd
13
2016-12-23
11:49:07
Wireless Camera
Front & Back Controls
IR Sensor
Night Light Button
Infrared LED’s sensor
you can turn the night light on or off by touch the
button or remotely control.
Microphone
Receives sounds for the area near the camera, and
transmits sound from the camera to the monitor.
Camera Antenna
Sends & receives signals to or from the monitor.
Sensor
Temperature and humidity sensor and dust sensor.
DC 5V Power Input
Connect the adapter to the camera.
Night Light Button
Bottom Controls
you can turn the night light on or off by touch the
button or remotely control.
Speaker
RESET Button
Produces the sound transmitted from the monitor.
Press this button to reset the wifi.
PAIR Button
Press this button to pair with a monitor.
RESET
PAIR
ON
Power Slide Switch
Turns the camera ON or OFF.
OFF
nn `` Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.
14 · Overview
SEW-3057W.indd
14
2016-12-23
11:49:10
Wireless wrist band
The button of the Wireless wrist band function:
1) press the button when the wireless wrist band black srceen, it will shin last for 6 seconds.
2) When wireless wrist band shake, by pressing the button can stop it shake.
Button
Show AM or PM.
Show the time.
Wireless Camera
Before you install the camera, carefully plan where and how it will be positioned, and
where you will route the cable that connects the camera to the power adapter.
Before starting permanent installation, verify its performance by observing the image
on the monitor when camera is positioned in the same location/position where it will be
permanently installed and the monitor is placed in the location where it will be used
most of the time.
Installation Warnings
Indicated battery and charging status.
Once Bluetooth pairing, the icon show.
Sensor
Humidity and temperature sensor
Aim the camera(s) to best optimize the viewing area: Select a location for the camera
that provides a clear view of the area you want to monitor, which is free from dust, and
is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
1.
Installation
How to Install
Dust sensor light
Good (Green, 0 -100μg) ;
Normal (Yellow, 101 - 200μg) ;
Bad (Red, above 200μg)
CAUTION: If you use the system to watch a young child, do not place the camera in the
child's reach.
Wireless Monitor
1.
Place the monitor in a place that will have clear
reception with your camera(s).
2.
Pull out the stand.
not pull up the stand lever with an excessive
nn `` Do
force.
2.
Carefully unpack the camera.
If you are installing cameras that did not come with the
system, please see the pairing camera section of this
manual for details on installation.
Installation
USB cable
Dust sensor fan
05
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
Mount the camera to the wall.
Mark the position of the screw hole on the wall, and
drill hole and insert 1 screw, then firmly attach the
camera to the wall by placing the stand over the
installed screw and pushing the base downwards.
install on a concrete wall, drill a hole and use
nn `` Toplastic
anchor to fix.
``
``
3.
Use the drilling template to drill holes on the wall for
camera installation. (Page 21)
The camera can also be placed on a flat surface, such
as a table or shelf, and no mounting hardware is
required.
Adjust the viewing angle of the camera.
Use the Pan, tilt control from the monitor to adjust the viewing angle of the
camera.
English · 15
SEW-3057W.indd
15
2016-12-23
11:49:16
Remote View
1. Go to App store to download and install "Baby View" into your Mobile phone and
install .(picture1)
2. Power the camera.
3. Press the "reset" button on the camera.
4. Press "setting button" of your cell-phone to search the camera Wi-Fi, touch the
camera Wi-Fi to connect. (picture2,3)
5. Click the APP, then click "tap here to add device" (picture4).
6. Scan the QR code of the bottom camera, default password "000000",click “OK”
(picture5,6).
picture4
picture5
picture6
The monitor will show “remote” icon when remote connect with baby unit via APP ”Baby
View”. And there is another way to connect for remote:
7. Research and now you can see your camera and UID, and you could reset the WLAN
network by click the icon "
" (picture7)
8. Touch WLAN Networks and select the local network, input your local Wi-Fi password.
Press “OK” to complete setting. (picture8~11)
9. You can use WLAN network to choose a local router for the camera, and change the
camera to internet mode. (picture12,13)
picture7
picture1
16 · Installation
SEW-3057W.indd
16
picture2
picture8
picture9
picture11
picture12
picture3
picture10
2016-12-23
11:49:29
picture13
05
Installation
English · 17
SEW-3057W.indd
17
2016-12-23
11:49:30
Appendix
Lens
Specifications
Image Sensor Type
Effective Pixel
Resolution
Image Compression
Max.Framerate
Streaming Capability
IP
Protocol
Streaming Method
Max. User Access
White Balance
Item
Viewing Angle (Diagonal)
Wireless Camera
1/4” Color CMOS Image Sensor
H: 1280, V: 1024
High : 2.5 Mbps(1280x720@~15fps), Middle : 1.5Mbps(704x480
@~20fps), Low : 700Kbps(704X480@~ 10 fps)
MPEG4
20fps @704x480
Uni
IPv4
UDP, RTSP, NTP, DHCP, HTTP
Unicast
4 Users simultaneously
Auto
IR LED Type/ Night Vision
Lullabies
Night Light
Loud Speaker Output
Power Requirement
Power Consumption
VOX level detection
Operating Temperature Range
Operating Humidity Range
Environment Rating
Pan Angle
Panning/tilt Speed
EFL=3.95mm, F=2.2
55 degree
IR LED – 940nm /5m
4 songs (Monitor Remote On / Off)
Yes (Manual & Remote On/Off) (Amber color, 3000-3500K)
0.5W, 90dB spl
DC 5V ± 10%
4.5Watt (Normal)，6.0Watt(IR On)
Low: 50dBA / High: 60dBA
0°C~+40°C
85% RH
Indoor use only
300°
12 degree per sec.
Tilt Angle
110°
RoHS Compliance
Yes for CE version only
Regulation Compliance
Audio
Weight
Details
FCC/CE/IC (Canada certification)
Built in Microphone/ Speaker
256g
Wireless Monitor
Display Type/Size
Color TFT 5”
Resolution
800X480
Touchscreen
Resistive touch type
SD card slot
Yes (Micro SD / not included)
Digital Zoom
X1.5, x2
Real Time Clock (RTC)
+/- 4sec / day
18 · Appendix
SEW-3057W.indd
18
2016-12-23
11:49:30
Item
Feed Timer Alert
sensor temperature alert range
(User range)
Yes (beep sound)
Details
Display
Item
Details
Digital watch / Battery check / connection check
Control part
push toggle
Transmission range
10 meters
Air quality : above 200
Weight / Strip length
9g/150 - 220mm (adjustable range for length)
Number of Camera Support
Up to 4 cameras
Temperature sensor
Yes (+/-2 degree),
Power Requirement
Adapter : DC 5V ± 10%, Battery : 3.8 Li-ion
Humidity sensor
Yes (+/-3%)
Loud Speaker Output
1W, 85dB spl
Air quality sensor (Dust)
Yes (Dust)
Sensor light
0°C ~ 40°C
Sensor Alert range (can’t
change by users)
Humidity range : below 45% ‐ above 65%
Wrist band alert
Bluetooth connection
Operating Humidity Range
85% RH
Environment Rating
Indoor use only
Regulation Compliance
FCC/CE/IC (Canada certification)
RoHS Compliance
Yes for CE version only
Audio
Built in Microphone/ Speaker
Other Special Feature
Bluetooth Sensor connection, Volume control, Pairing
Battery Type
Li-ion
Battery Capacity
2500mAh Rechargeable battery pack, Replaceable
Battery time duration
Min 4 hours (Video on)
Weight
224g
Material for band
Soft Silicon
Alert Method
Vibration
Battery Type
Li-ion (38mAh Rechargeable battery)
Wireless wrist band
Good (Green, 0 -100) ; Normal (Yellow, 101 - 200) ; Bad (Red, above
200
Weight
69g
Troubleshooting
Problem
Solution
No picture from a
camera
1.
2.
3.
4.
5.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
No sounds (even with
both units turned on)
1. Make sure that the power adapter is connected to the camera.
2. The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3. The monitor may be out of range of the camera; be sure to check if the
Range LED in on continuously.
Check all connections to the camera. Make sure the adapter is plugged in.
Make sure that the cameras and monitor are both ON.
Make sure that the camera is in range of the monitor.
Make sure the camera and monitor are paired.
Adjust the monitor antenna to vertical position.
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to vertical position.
Appendix
5.5Watt (max)
0°C~+40°C
06
Power Consumption
Operating Temperature Range
Sensor
English · 19
SEW-3057W.indd
19
2016-12-23
11:49:31
Problem
Your BrightVIEW is
emitting an high
pitched noise/
feedback.
Solution
This sound is normal feedback which occurs if the monitor and camera are too
close together. Move them further apart.
batteries will cause the supply current to become unstable and will affect the quality
nn `` Low
of the video/audio. Please charge the battery fully for use for superior video.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their working
life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
SEW-3057W.indd
20
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
2016-12-23
11:49:31
Screw holes for
the Camera
installation
ON
PAIR
RESET
This template is used to install
the camera on the wall.
OFF
TEMPLATE
CAMERA FRONT
SEW-3057W.indd
21
2016-12-23
11:49:31
MEMO
SEW-3057W.indd
22
2016-12-23
11:49:31
Head Office
86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea
Tel +82.2.729.5277, 5254 Fax +82.2.729.5489
www.hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free +1.877.213.1222 Direct +1.201.325.6920
Fax +1.201.373.0124
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel +44.1932.57.8100 Fax +44.1932.57.8101
SEW-3057W.indd
23
2016-12-23
11:49:32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2016:12:23 11:48:38+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Modify Date                     : 2017:01:11 17:21:37+09:00
Metadata Date                   : 2017:01:11 17:21:37+09:00
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com)
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:a695a402-e8dd-41bb-9c48-115f1970c0f0
Instance ID                     : uuid:ff2796c9-4d8a-435c-9877-aba35a2d7634
Page Count                      : 23
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools