Hanwha Techwin SEP1001RW Baby Camera User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	2598603
Application ID	k2IVe7i27tNWOakBzKNyug==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.19kB (1289851 bits)
Date Submitted	2015-04-28 00:00:00
Date Available	2015-04-28 00:00:00
Creation Date	2012-08-21 17:05:49
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2015-04-10 16:25:28
Document Title	User Manual 2
Document Creator	Adobe Acrobat Pro 9.2.0

Overview
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Monitor Antenna
Receives and sends signals from or to the camera.
3.5” LCD Screen
Displays video from the camera.
Sound Level LEDs
Flashes when sound is detected.
Power LED
Indicator turns green when powered.
When battery is charging, this LED will in green color.
—— Navigation Controls /
Button
Viewing Mode: The following controls are used while watching live video from the camera:
•
•
•
•
Press the [$] or [%] button to adjust camera’s framing upwards or downwards.
Press the [_] or [+] button to adjust camera’s framing to the left or right.
Press [
] button to turn on/off the night light.
While in zooming, use [$/%/_/+] button to move the screen around.
MENU Button
Press to access from video monitor mode to menu
mode operation. In menu mode, press this button will go
back to monitor mode with save from selection.
SLEEP Button
Used to turn on / off the screen by press this button.
User can turn on the video again by pressing any buttons.
Microphone
Transmits audio to the camera when [TALK] button is
pressed down and held like a walkie talkie.
Navigation Controls / OK/Night light Button
Use the controls to move and select while in Viewing
Mode, Menu Mode.
You can control PTZ operation.
Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.
] button to confirm the menu selection.
Press the [
10 · Overview
SEW-3037W-ENGLISH.indd 10
2012-08-17 오후 4:34:30
Back Controls
TALK Button
Belt Clip
Press down and hold the button to talk back to the camera.
When you carry the monitor, use the belt hanger to hold the
monitor onto your belt.
Kick Stand
Speaker
Produces the sound transmitted from the camera(s).
Use to hold the monitor onto a table.
- ON
- VOX
- OFF
DC IN 6V
04
nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
Overview
Side Controls
Power and VOX ON / OFF Slide Switch
Set this switch to ON or OFF to turn on/off the wireless monitor,
and set to VOX to turn on the VOX mode.
Volume +/– Button
Used for adjusting the volume up/down.
DC 6V Power Input
Connect the included AC power adapter to power and/or
charge the monitor battery.
(when the monitor is not placed in the optional Charge cradle).
English · 11
SEW-3037W-ENGLISH.indd 11
2012-08-17 오후 4:34:31
Wireless Camera
Front & Back Controls
IR LEDs
Infrared LED’s provide viewing in no / low light
conditions.
Microphone
Receives sounds for the area near the camera, and
transmits sound from the camera to the monitor.
Speaker
Produces the sound transmitted from the monitor.
Night Light Button
Turns Night Light ON or OFF.
When the camera is powered on, Night Light would be
automatically turned on.
Camera Antenna
Sends & receives signals to or from the monitor.
DC 6V Power Input
Connect the adapter to the camera.
nn `` Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.
Side & Bottom Controls
Power Slide Switch
Turns the camera ON or OFF.
PAIR Button
Press this button to pair with a monitor.
Night vision sensor
Detects light levels where the camera is placed.
12 · Overview
SEW-3037W-ENGLISH.indd 12
2012-08-17 오후 4:34:31
Installation
How to Install
1.
2.
CAUTION: If you use the system to watch a young child, do not place the camera in the
child's reach.
Wireless Monitor
1.
Place the monitor in a place that will have clear
reception with your camera(s).
2.
Pull out the stand.
Carefully unpack the camera.
If you are installing cameras that did not come with the system, please see the
pairing camera section of this manual for details on installation.
Mount the camera to the wall.
Mark the position of the screw hole on the wall, and
drill hole and insert 1 screw, then firmly attach the
camera to the wall by placing the stand over the
installed screw and pushing the base downwards.
install on a concrete wall, drill a hole and use plastic
nn `` Toanchor
to fix.
``
``
Use the drilling template to drill holes on the wall for
camera installation. (Page 17)
The camera can also be placed on a flat surface, such as a table or shelf, and no
mounting hardware is required.
Wireless Camera
the camera with excessive force may
nn `` Adjusting
damage the unit.
Before you install the camera, carefully plan where and how it will be positioned, and
where you will route the cable that connects the camera to the power adapter.
Before starting permanent installation, verify its performance by observing the image
on the monitor when camera is positioned in the same location/position where it will be
permanently installed and the monitor is placed in the location where it will be used
most of the time.
Adjust the viewing angle of the camera.
Use the Pan, tilt control from the monitor to adjust the
viewing angle of the camera.
Installation
3.
05
not pull up the stand lever with an excessive
nn `` Do
force.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for the camera
that provides a clear view of the area you want to monitor, which is free from dust, and
is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
English · 13
SEW-3037W-ENGLISH.indd 13
2012-08-17 오후 4:34:32
Appendix
Item
Operating Humidity Range
Specifications
Environment Rating
Item
Operating Frequency Range
Transmitting Power
Monitor Sensitivity
Type of Spread Spectrum TX
Type of Modulation
Data Rate
Transmission range
Weight
System General
Details
2400 MHz~2483.5 MHz
17dBm Max
-88dBm
Pan Angle
GFSK
3Mbps
Outdoor 300 m (Eye of Sight)
Gross weight: 930g
Wireless Camera
300°
110°
RoHS Compliance
Yes for CE version only
Regulation Compliance
Other Special Feature
Details
Indoor use only
Tilt Angle
Weight
FHSS
85% RH
Wireless Camera
FCC/CE
Built in Microphone/ Speaker
214g
Wireless Monitor
Display Type/Size
Color TFT 3.5”
Resolution (Pixel)
320X240 (RGB)
Viewing Angle
H: 80 degree, V: 100 degree
Number of Camera Support
Up to 4 cameras
Image Sensor Type
1/5” Color CMOS Image Sensor
Power Requirement
Adapter : DC 6V ± 10%, Battery : 3.7V Li Ion battery
White Balance
Auto
Loud Speaker Output
80dBA
Power Consumption
480mA maximum Condition Charging + Speaker with voice at volume 5
Operating Temperature Range
0°C~+40°C
Operating Humidity Range
85% RH
Environment Rating
Indoor use only
Regulation Compliance
FCC/CE
480mA Condition Night vision mode, motor in motion and talk back
RoHS Compliance
Yes for CE version only
0°C~+40°C
Other Special Feature
Volume control, Pairing
Weight
167g
Effective Pixel
Lens
Viewing Angle (Diagonal)
IR LED Type/ Night Vision
Loud Speaker Output
Power Requirement
Power Consumption
VOX level detection
Operating Temperature Range
H: 640, V: 480
EFL=3.6mm, F=2.8
56 degree
8pcs IR LED – 940nm / 5m
80dBA
DC 6V ± 10%
High: 50dBA / Low: 60dBA
14 · Appendix
SEW-3037W-ENGLISH.indd 14
2012-08-17 오후 4:34:32
Troubleshooting
Problem
Solution
No picture from a
camera
1.
2.
3.
4.
5.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
No sounds (even with
both units turned on)
1. Make sure that the power adapter is connected to the camera.
2. The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3. The monitor may be out of range of the camera; be sure to check if the
Range LED in on continuously.
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to vertical position.
batteries will cause the supply current to become unstable and will affect the quality
nn `` Low
of the video/audio. Please charge the battery fully for use for superior video.
Appendix
This sound is normal feedback which occurs if the monitor and camera are too
close together. Move them further apart.
06
Your SafeView is
emitting an high
pitched noise/
feedback.
Check all connections to the camera. Make sure the adapter is plugged in.
Make sure that the cameras and monitor are both ON.
Make sure that the camera is in range of the monitor.
Make sure the camera and monitor are paired.
Adjust the monitor antenna to vertical position.
English · 15
SEW-3037W-ENGLISH.indd 15
2012-08-17 오후 4:34:32
Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their working
life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
SEW-3037W-ENGLISH.indd 16
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
2012-08-17 오후 4:34:32
TEMPLATE
This template is used to install
the camera on the wall.
Screw holes for
the Camera
installation
CAMERA FRONT
SEW-3037W-ENGLISH.indd 17
2012-08-17 오후 4:34:32
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : 1-877-349-3149
www.samsungsv.com
SEW-3037W-ENGLISH.indd 18
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,
Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
2012-08-17 오후 4:34:32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2012:08:21 17:05:49+08:00
Creator                         : Adobe Acrobat Pro 9.2.0
Modify Date                     : 2015:04:10 16:25:28+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:04:10 16:25:28+09:00
Creator Tool                    : Adobe Acrobat Pro 9.2.0
Format                          : application/pdf
Document ID                     : uuid:dfc534d5-97c8-544b-9dbb-fe2e18e8c458
Instance ID                     : uuid:0d732132-d115-490c-ad29-53e48ccf2039
Producer                        : Adobe PDF Library 9.9
Page Count                      : 9

EXIF Metadata provided by EXIF.tools